Plymouth - uvesafb: cannot reserve video memory at 0xdf00000

If none of the more specific forums is the right place to ask

Plymouth - uvesafb: cannot reserve video memory at 0xdf00000

Postby Luca91 » 2015-09-13 14:43

Hello, I'm trying to install plymouth on my Debian 8.2 Jessie (Stable), but when I boot my pc I get this error:
Code: Select all
uvesafb: cannot reserve video memory at 0xdf000000


This is my configuration:
Code: Select all
cat /etc/default/grub   
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
#GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=1280x1024x24
#GRUB_GFXPAYLOAD_LINUX=1920x1024x24
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"


---

sudo hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.x5Iizyub2uD
Hardware Class: framebuffer
Model: "NVIDIA GK107 Board - 20100004"
Vendor: "NVIDIA Corporation"
Device: "GK107 Board - 20100004"
SubVendor: "NVIDIA"
SubDevice:
Revision: "Chip Rev"
Memory Size: 14 MB
Memory Range: 0xdf000000-0xdfdfffff (rw)
Mode 0x0300: 640x400 (+640), 8 bits
Mode 0x0301: 640x480 (+640), 8 bits
Mode 0x0303: 800x600 (+800), 8 bits
Mode 0x0305: 1024x768 (+1024), 8 bits
Mode 0x0307: 1280x1024 (+1280), 8 bits
Mode 0x030e: 320x200 (+640), 16 bits
Mode 0x030f: 320x200 (+1280), 24 bits
Mode 0x0311: 640x480 (+1280), 16 bits
Mode 0x0312: 640x480 (+2560), 24 bits
Mode 0x0314: 800x600 (+1600), 16 bits
Mode 0x0315: 800x600 (+3200), 24 bits
Mode 0x0317: 1024x768 (+2048), 16 bits
Mode 0x0318: 1024x768 (+4096), 24 bits
Mode 0x031a: 1280x1024 (+2560), 16 bits
Mode 0x031b: 1280x1024 (+5120), 24 bits
Mode 0x0330: 320x200 (+320), 8 bits
Mode 0x0331: 320x400 (+320), 8 bits
Mode 0x0332: 320x400 (+640), 16 bits
Mode 0x0333: 320x400 (+1280), 24 bits
Mode 0x0334: 320x240 (+320), 8 bits
Mode 0x0335: 320x240 (+640), 16 bits
Mode 0x0336: 320x240 (+1280), 24 bits
Mode 0x033d: 640x400 (+1280), 16 bits
Mode 0x033e: 640x400 (+2560), 24 bits
Mode 0x034b: 1920x1080 (+1920), 8 bits
Mode 0x034c: 1920x1080 (+3840), 16 bits
Mode 0x034d: 1920x1080 (+7680), 24 bits
Mode 0x0360: 1280x800 (+1280), 8 bits
Mode 0x0361: 1280x800 (+5120), 24 bits
Config Status: cfg=new, avail=yes, need=no, active=unknown


---

cat /proc/fb
0 simple


---

cat /etc/initramfs-tools/modules
# List of modules that you want to include in your initramfs.
# They will be loaded at boot time in the order below.
#
# Syntax: module_name [args ...]
#
# You must run update-initramfs(8) to effect this change.
#
# Examples:
#
# raid1
# sd_mod
# drm

uvesafb mode_option=1280x1024-24 mtrr=3 scroll=ywrap




---

dmesg | grep uvesafb
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=3a85965b-2408-4ccb-86ae-0f690667a985 ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=3a85965b-2408-4ccb-86ae-0f690667a985 ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
[ 1.435235] uvesafb: NVIDIA Corporation, GK107 Board - 20100004, Chip Rev, OEM: NVIDIA, VBE v3.0
[ 1.601226] uvesafb: VBIOS/hardware doesn't support DDC transfers
[ 1.601229] uvesafb: no monitor limits have been set, default refresh rate will be used
[ 1.602112] uvesafb: scrolling: redraw
[ 1.602117] uvesafb: cannot reserve video memory at 0xdf000000
[ 1.602154] uvesafb: probe of uvesafb.0 failed with error -5




Any help please ? Thanks
Luca91
 
Posts: 12
Joined: 2015-09-13 14:40

Return to General Questions

Who is online

Users browsing this forum: No registered users and 8 guests

fashionable