a start job is running for dev-disk-by\x2uuid...

If none of the more specific forums is the right place to ask

Re: a start job is running for dev-disk-by\x2uuid...

Postby Laurentius » 2017-03-13 00:35

There it is

Code: Select all
canelon3@debtest:~$ dmesg | grep -A8 ', max U'
[    7.573888] ata1.00: ATA-8: SAMSUNG HM160HI, HH100-15, max UDMA7
[    7.573891] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    7.576913] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    7.577104] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.577108] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    7.577298] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.577490] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    7.581136] ata1.00: configured for UDMA/133
[    7.581267] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HI  0-15 PQ: 0 ANSI: 5
--
[    8.431413] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633M, 0200, max UDMA/100
[    8.450902] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    8.451191] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeeded
[    8.451470] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeeded
[    8.451473] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    8.451751] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeeded
[    8.469430] ata5.00: configured for UDMA/100
[    8.472023] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633M  0200 PQ: 0 ANSI: 5
[    8.800023] ata6: SATA link down (SStatus 0 SControl 300)
canelon3@debtest:~$


ata1.00 seems to be the hard drive. It doesen't make any clunks and seem to work well.
ata5.00 is the dvd reader/writer. it works very bad. barely can read anything and clunks a lot. i never use it and use an external usb dvd/rw

should i replace the hard drive?

may be related to this that sometimes, not very often, the system hangs for a while, may be a minute, may be three.... The GUI gets frozen for some time.
Laurentius
 
Posts: 19
Joined: 2017-01-14 00:52

Re: a start job is running for dev-disk-by\x2uuid...

Postby bw123 » 2017-03-13 13:30

should i replace the hard drive?


The way I've narrowed down things like this is disconnect all drives, install a known good (or new) drive with os on a new cable, and zero fill and use the suspect drive as storage for a while. Run smartctl daily and use diff on today and yesterday's report.

may be related to this that sometimes, not very often, the system hangs for a while, may be a minute, may be three.... The GUI gets frozen for some time.


Yeah, that sounds typical for a failing drive. You might be able to straighten it out, but drives are so cheap now, you could get a brand new 500 gig for an hours wages. It would probably take you at least an hour to backup, zero fill, and restore the thing. If it's going to die an a month anyway, or keep acting like this, why spend the time?
jessie/KDE4.14.2 plasma netbook, 4.6.0-0.bpo.1-amd64 GNU/Linux - Dell Mini 1012 2gb
User avatar
bw123
 
Posts: 2335
Joined: 2011-05-09 06:02
Location: TN_USA

Re: a start job is running for dev-disk-by\x2uuid...

Postby debiman » 2017-03-13 18:21

Laurentius wrote:ata5.00 is the dvd reader/writer. it works very bad. barely can read anything and clunks a lot. i never use it and use an external usb dvd/rw

i would DEFINITELY remove/disconnect the dvd.
at the very least it will help you narrow down your problem troubleshooting.
User avatar
debiman
 
Posts: 673
Joined: 2013-03-12 07:18

Previous

Return to General Questions

Who is online

Users browsing this forum: No registered users and 4 guests

fashionable