SATA error on boot.

If none of the more specific forums is the right place to ask

SATA error on boot.

Postby kereberos » 2017-03-28 19:24

hi everybody.
i have some error on boot (debian 8 stable).
Code: Select all
[ 6115.005223] ata6: irq_stat 0x00000040, connection status changed
[ 6115.005225] ata6: SError: { CommWake DevExch }
[ 6115.005236] ata6: limiting SATA link speed to 1.5 Gbps
[ 6115.005238] ata6: hard resetting link
[ 6117.232755] ata6: SATA link down (SStatus 1 SControl 310)
[ 6117.232783] ata6: EH complete
[ 6117.239733] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 6117.239742] ata6: irq_stat 0x00000040, connection status changed
[ 6117.239746] ata6: SError: { CommWake DevExch }
[ 6117.239763] ata6: limiting SATA link speed to 1.5 Gbps
[ 6117.239768] ata6: hard resetting link

i read a lot about this issue and i saw people say this one is bad hdd or sata cable, but it happened right away and SMART check looking good..
I saw these messages after I changed the file system, I changed the fstab file and the computer did not perform boot afterwards, so I uploaded the system through live usb and changed the fstab file back.
tnx a lot for helping!
kereberos
 
Posts: 62
Joined: 2011-05-23 09:12

Re: SATA error on boot.

Postby bw123 » 2017-03-28 21:50

SMART check looking good..


You have run short and long tests with smartctl with no errors?
User avatar
bw123
 
Posts: 2378
Joined: 2011-05-09 06:02
Location: TN_USA

Re: SATA error on boot.

Postby kereberos » 2017-03-29 18:29

hi, tnx about your answer
yes, i made a short test and long test.
this is the short test:
Code: Select all
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus SpinPoint M8 (AF)
Device Model:     ST1000LM024 HN-M101MBB
Serial Number:    S30YJ9HF307022
LU WWN Device Id: 5 0004cf 20cac3e6e
Firmware Version: 2BA30001
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 29 22:15:09 2017 IDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (13080) seconds.
Offline data collection
capabilities:           (0x5b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 218) minutes.
SCT capabilities:           (0x003f)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0026   056   056   000    Old_age   Always       -       11882
  3 Spin_Up_Time            0x0023   092   088   025    Pre-fail  Always       -       2459
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1543
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       4053
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       147
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1516
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       93
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   048   000    Old_age   Always       -       32 (Min/Max 11/53)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   100   100   000    Old_age   Always       -       3
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       401
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       147
225 Load_Cycle_Count        0x0032   086   086   000    Old_age   Always       -       151172

SMART Error Log Version: 1
ATA Error Count: 1
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 3747 hours (156 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 00 00 00 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  01 9f 18 9f 18 f0 18 9f      10:54:18.685  [RESERVED]
  00 00 00 00 00 00 00 00      00:00:00.126  NOP [Abort queued commands]
  61 00 70 60 3e e3 40 00      00:00:00.131  WRITE FPDMA QUEUED
  61 00 00 60 3d e3 40 00      00:00:00.131  WRITE FPDMA QUEUED
  61 00 10 b0 bf a5 40 00      00:00:00.131  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4053         -
# 2  Extended offline    Aborted by host               90%      4053         -
# 3  Extended offline    Completed without error       00%      4050         -
# 4  Short offline       Completed without error       00%      3846         -
# 5  Vendor (0x50)       Completed without error       00%      3772         -
# 6  Short offline       Completed without error       00%      3772         -
# 7  Vendor (0x50)       Completed without error       00%      3647         -
# 8  Short offline       Completed without error       00%      3647         -
# 9  Vendor (0x50)       Completed without error       00%      3419         -
#10  Short offline       Completed without error       00%      3419         -
#11  Vendor (0x50)       Completed without error       00%      3227         -
#12  Short offline       Completed without error       00%      3227         -
#13  Vendor (0x50)       Completed without error       00%      3176         -
#14  Short offline       Completed without error       00%      3175         -
#15  Vendor (0x50)       Completed without error       00%      3091         -
#16  Short offline       Completed without error       00%      3091         -
#17  Vendor (0x50)       Completed without error       00%      2975         -
#18  Short offline       Completed without error       00%      2975         -
#19  Vendor (0x50)       Completed without error       00%      2889         -
#20  Short offline       Completed without error       00%      2889         -
#21  Vendor (0x50)       Completed without error       00%      2818         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
kereberos
 
Posts: 62
Joined: 2011-05-23 09:12

Re: SATA error on boot.

Postby Segfault » 2017-03-29 19:02

IMHO dropping to 1.5 Gbit/s indicates bad communication. Have you tried a different SATA port and another SATA cable?
Segfault
 
Posts: 480
Joined: 2005-09-24 12:24

Re: SATA error on boot.

Postby kereberos » 2017-03-29 19:12

Segfault wrote:IMHO dropping to 1.5 Gbit/s indicates bad communication. Have you tried a different SATA port and another SATA cable?

hi.
i do not have another SATA port/cable cause its my laptop.
but, if do you think this is the problem i will try to replace these components.
kereberos
 
Posts: 62
Joined: 2011-05-23 09:12

Re: SATA error on boot.

Postby Segfault » 2017-03-29 19:44

There are three components involved to get this error. SATA controller and its port, cable, the control board of hard drive. One of them is failing. In case of laptop there probably is no cable, just the SATA controller, connector and the controller board of the HDD. Re-seating the drive - and inspecting the connectors while the drive is out - may help, too.
Segfault
 
Posts: 480
Joined: 2005-09-24 12:24

Re: SATA error on boot.

Postby kereberos » 2017-03-29 20:42

tnx a lot.. i will try it.
kereberos
 
Posts: 62
Joined: 2011-05-23 09:12

Re: SATA error on boot.

Postby Segfault » 2017-03-29 21:23

You are welcome. Please do not use text speak. Some people find text speak when used without a good reason careless and rude. I am one of those people.
Segfault
 
Posts: 480
Joined: 2005-09-24 12:24


Return to General Questions

Who is online

Users browsing this forum: No registered users and 5 guests

fashionable