How to mount the secondary ISO9960 FileSystem on a Huawei Y6

If none of the more specific forums is the right place to ask

How to mount the secondary ISO9960 FileSystem on a Huawei Y6

Postby linux4michelleWeb » 2020-05-30 09:36

I get following:

Code: Select all
May 30 13:23:04 t400 kernel: [2235761.124161] usb 7-1: USB disconnect, device number 36
May 30 13:23:08 t400 kernel: [2235765.536149] usb 7-1: new high-speed USB device number 37 using ehci-pci
May 30 13:23:09 t400 kernel: [2235765.693196] usb 7-1: New USB device found, idVendor=12d1, idProduct=107f, bcdDevice= 4.09
May 30 13:23:09 t400 kernel: [2235765.693209] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 30 13:23:09 t400 kernel: [2235765.693216] usb 7-1: Product: JAT-L41
May 30 13:23:09 t400 kernel: [2235765.693221] usb 7-1: Manufacturer: HUAWEI
May 30 13:23:09 t400 kernel: [2235765.693227] usb 7-1: SerialNumber: YKCNW19C25021035
May 30 13:23:09 t400 kernel: [2235765.694878] usb-storage 7-1:1.1: USB Mass Storage device detected
May 30 13:23:09 t400 kernel: [2235765.695584] scsi host7: usb-storage 7-1:1.1
May 30 13:23:10 t400 kernel: [2235766.697001] scsi 7:0:0:0: CD-ROM            Linux    File-CD Gadget   0409 PQ: 0 ANSI: 2
May 30 13:23:10 t400 kernel: [2235766.700439] sr 7:0:0:0: Power-on or device reset occurred
May 30 13:23:10 t400 kernel: [2235766.701812] sr 7:0:0:0: [sr0] scsi-1 drive
May 30 13:23:10 t400 kernel: [2235766.702598] sr 7:0:0:0: Attached scsi CD-ROM sr0
May 30 13:23:10 t400 kernel: [2235766.702718] sr 7:0:0:0: Attached scsi generic sg3 type 5
May 30 13:23:17 t400 kernel: [2235774.403688] ISO 9660 Extensions: Microsoft Joliet Level 1
May 30 13:23:17 t400 kernel: [2235774.404204] ISOFS: changing to secondary root


If I try to moung /dev/sr0 directly after connecting, I see only 3 files

Autorun.inf
HiSuiteDownLoader.exe
HiSuite.ico

in which I am definitively not interested.

How can I see the second partition?

Thanks in advance
Michelle
linux4michelleWeb
 
Posts: 29
Joined: 2019-07-15 15:41
Location: Estonia

Re: How to mount the secondary ISO9960 FileSystem on a Huawe

Postby stevepusser » 2020-05-31 06:56

Have you tried modemmanager or modem-manager-gui?
The MX Linux repositories: Backports galore! If we don't have something, just ask and we'll try--we like challenges. New packages: Kodi 18.7, QMPlay2 20.07.04, Pale Moon 28.10.0, KeepassXC 2.6.0, Krita 4.3.0, Foliate 2.4.2
User avatar
stevepusser
 
Posts: 11815
Joined: 2009-10-06 05:53

Re: How to mount the secondary ISO9960 FileSystem on a Huawe

Postby Head_on_a_Stick » 2020-05-31 12:57

Black Lives Matter

Debian buster-backports ISO image: for new hardware support
User avatar
Head_on_a_Stick
 
Posts: 12194
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: How to mount the secondary ISO9960 FileSystem on a Huawe

Postby p.H » 2020-05-31 17:20

linux4michelleWeb wrote:How can I see the second partition?

Which second partition ?
What is a Huawei Y6 ?

Did you check usb-modeswitch ?
p.H
 
Posts: 1383
Joined: 2017-09-17 07:12

Re: How to mount the secondary ISO9960 FileSystem on a Huawe

Postby cuckooflew » 2020-05-31 18:01

What is a Huawei Y6 ?
It is a mobile phone, android. I don't understand what the OP means by second partition,
linux4michelleWeb »If I try to moung /dev/sr0 directly after connecting, I see only 3 files

Autorun.inf
HiSuiteDownLoader.exe
HiSuite.ico

in which I am definitively not interested.

Well it is mounted, obviously......you need to be more clear, What is it that you are looking for, or interested in ? What are you trying to accomplish ? The 'df' command should show all the mounted partitions, please show us the out put.

Use
Code: Select all
$ lspci
Show us the output.

I need to remind my self to do a search for the OP first, in this case the second hit, :
https://support.huawei.com/enterprise/en/doc/EDOC1100105755/7ce13942/manually-viewing-the-disk-mount-point
Run the lspci -D|grep "Virtio SCSI" command to query the addresses of all SCSI controllers on the ECS. In the command output, view the address of the controller whose position is specified by a in the device address a-x:x:x.

In the future please try searching before askingm I used the title of your post as keywords:How to mount the secondary ISO9960 FileSystem on a Huawei y6
The second hit , is the support for that phone, and they give very straight forward instructions. In any event if there is something you do not understand, feel free to ask, and I also need to remember to do the search first, before trying to answer,.. :mrgreen:
Please Read What we expect you have already Done
Google knows a lot,
God, our Father knows all, maybe ask Him ,
…one flew east, one flew west,
One flew over the cuckoo’s nest.

I am not the right colour, so my life does not matter ?
to God it does :)
cuckooflew
 
Posts: 434
Joined: 2018-05-10 19:34
Location: Some where out west

Re: How to mount the secondary ISO9960 FileSystem on a Huawe

Postby linux4michelleWeb » 2020-06-02 03:21

I have searched the subject, and HAVE installed

mtp-tools
gvfs
gvfs-backends
go-mtpfs

which seems not to be suitable.

gmtp

crash if I want to download more then one file.

The funny thing is, lspci does not show an SCSI controller, while I have /dev/sr0 clearly shown.
Is there something I mis here?
linux4michelleWeb
 
Posts: 29
Joined: 2019-07-15 15:41
Location: Estonia

Re: How to mount the secondary ISO9960 FileSystem on a Huawe

Postby linux4michelleWeb » 2020-06-02 03:26

root@t400:~# lsusb
Bus 008 Device 012: ID 14cd:1212 Super Top microSD card reader (SY-T18)
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 004: ID 17ef:1004 Lenovo Integrated Webcam
Bus 007 Device 003: ID 04b3:4485 IBM Corp. ThinkPad Dock Hub
Bus 007 Device 041: ID 12d1:107f Huawei Technologies Co., Ltd.
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

root@t400:~# lspci -D
0000:00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
0000:00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
0000:00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
0000:00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
0000:00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07)
0000:00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07)
0000:00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
0000:00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
0000:00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
0000:00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
0000:00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
0000:00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
0000:00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
0000:00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
0000:00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
0000:00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
0000:00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
0000:00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
0000:00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
0000:03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
0000:15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
0000:15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
0000:15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
0000:15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
0000:15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)

root@t400:~# ls /dev/sr*
/dev/sr0
linux4michelleWeb
 
Posts: 29
Joined: 2019-07-15 15:41
Location: Estonia

Re: How to mount the secondary ISO9960 FileSystem on a Huawe

Postby sunrat » 2020-06-02 05:35

I've found enabling Developer Options on the phone can help with accessing the file system from computer. Can't recall if I changed any developer settings but worth a look. YMMV
“ computer users can be divided into 2 categories:
Those who have lost data
...and those who have not lost data YET ”
Remember to BACKUP!
User avatar
sunrat
 
Posts: 3088
Joined: 2006-08-29 09:12
Location: Melbourne, Australia

Re: How to mount the secondary ISO9960 FileSystem on a Huawe

Postby sunrat » 2020-06-02 05:45

cuckooflew wrote:I need to remind my self to do a search for the OP first, in this case the second hit, :
https://support.huawei.com/enterprise/en/doc/EDOC1100105755/7ce13942/manually-viewing-the-disk-mount-point
Run the lspci -D|grep "Virtio SCSI" command to query the addresses of all SCSI controllers on the ECS. In the command output, view the address of the controller whose position is specified by a in the device address a-x:x:x.

That's about cloud storage, irrelevant.
In the future please try searching before askingm I used the title of your post as keywords:How to mount the secondary ISO9960 FileSystem on a Huawei y6
The second hit , is the support for that phone, and they give very straight forward instructions. In any event if there is something you do not understand, feel free to ask, and I also need to remember to do the search first, before trying to answer,.. :mrgreen:

Second hit when I tried was about mounting an .iso on a cloud VM, also irrelevant. First hit was this topic. Nothing related to that phone showed up at all.
It would be better to post the link you found as searches are not always going to return the same results. I know you love doing searches for people who are unable to search for themselves, but it would be preferable if they were helpful.
“ computer users can be divided into 2 categories:
Those who have lost data
...and those who have not lost data YET ”
Remember to BACKUP!
User avatar
sunrat
 
Posts: 3088
Joined: 2006-08-29 09:12
Location: Melbourne, Australia

Re: How to mount the secondary ISO9960 FileSystem on a Huawe

Postby cuckooflew » 2020-06-02 06:03

@ Sunrat, thanks, that explains why I could not understand it very well, and now I am embarrased,..
@ OP , forget about the links I showed,

Any way, the 'lsusb' out put does show it:
Code: Select all
Bus 007 Device 041: ID 12d1:107f Huawei Technologies Co., Ltd. 

I am to tired now, to say anything now, and I really am sorry for posting irrelevant info, ..that is terrible and embarassing,...
Please Read What we expect you have already Done
Google knows a lot,
God, our Father knows all, maybe ask Him ,
…one flew east, one flew west,
One flew over the cuckoo’s nest.

I am not the right colour, so my life does not matter ?
to God it does :)
cuckooflew
 
Posts: 434
Joined: 2018-05-10 19:34
Location: Some where out west


Return to General Questions

Who is online

Users browsing this forum: No registered users and 12 guests

fashionable