Code: Select all
[drm:si_dpm_set_power_state [radeon]] *ERROR* si_restrict_performance_levels_before_switch failed
Code: Select all
4.329920] [drm] Radeon Display Connectors
[ 4.329920] [drm] Connector 0:
[ 4.329921] [drm] DP-1
[ 4.329921] [drm] HPD5
[ 4.329922] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 4.329922] [drm] Encoders:
[ 4.329923] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.329923] [drm] Connector 1:
[ 4.329924] [drm] DP-2
[ 4.329924] [drm] HPD4
[ 4.329925] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 4.329925] [drm] Encoders:
[ 4.329926] [drm] DFP2: INTERNAL_UNIPHY2
[ 4.329926] [drm] Connector 2:
[ 4.329926] [drm] HDMI-A-1
[ 4.329927] [drm] HPD1
[ 4.329927] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 4.329928] [drm] Encoders:
[ 4.329928] [drm] DFP3: INTERNAL_UNIPHY1
[ 4.329928] [drm] Connector 3:
[ 4.329929] [drm] DVI-I-1
[ 4.329929] [drm] HPD3
[ 4.329930] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 4.329930] [drm] Encoders:
[ 4.329931] [drm] DFP4: INTERNAL_UNIPHY
[ 4.329931] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.432629] [drm] fb mappable at 0xC05D8000
[ 4.432629] [drm] vram apper at 0xC0000000
[ 4.432630] [drm] size 33177600
[ 4.432630] [drm] fb depth is 24
[ 4.432630] [drm] pitch is 15360
[ 4.432713] fbcon: radeondrmfb (fb0) is primary device
[ 4.604820] [drm:si_dpm_set_power_state [radeon]] *ERROR* si_restrict_performance_levels_before_switch failed
[ 4.674022] Console: switching to colour frame buffer device 480x135
[ 4.688964] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 4.701430] [drm] Initialized radeon 2.48.0 20080528 for 0000:01:00.0 on minor 0
[ 4.710984] PM: Starting manual resume from disk
[ 4.710986] PM: Hibernation image partition 8:23 present
[ 4.710987] PM: Looking for hibernation image.
[ 4.711150] PM: Image not found (code -22)
[ 4.711151] PM: Hibernation image not present or could not be loaded.
[ 4.790904] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Code: Select all
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 5.079398] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
[ 5.079401] sp5100_tco: I/O address 0x0cd6 already in use
firmware-amd-graphics, firware-linux-free and nonfree
I read the debian wiki, and it did not recommend installing AMD proprietary driver. Any advice welcome. TIA.