Installation on i6200U NUC

Help with issues regarding installation of Debian

Re: Installation on i6200U NUC

Postby swmcl » 2018-01-23 03:53

stevepusser,

Unetbootin is not failing for me. Unetbootin is working.

I used unetbootin to install pfSense. Other unetbootin images are booting and I can step through the install process but because of installer issues I can't effect a complete install.
swmcl
 
Posts: 23
Joined: 2018-01-06 05:17

Re: Installation on i6200U NUC

Postby GarryRicketson » 2018-01-23 04:19

Search for "Ibox 601" on Alibaba.

You are joking with us , aren't you ?

You can write down the specs, copy/paste them, into a file, then copy /paste, or type in the text.
the text , please use "code boxes". Example:
Code: Select all
Chipset
Intel Q45 Express Chipset w/ICH10DO
Non-volatile memory on chipset
BIOS Configuration SPI (Serial Peripheral Interface) 64Mbit (8MB) located at SPI_FLASH on chipset
---snip---

No need to upload promotions from Alibaba, nor do searches for alibaba sales sites.

Or simply do what steve suggested and asked:
by stevepusser » Mint includes the inxi utility...give us the results of the

Code: Select all
    inxi -F

command so we have a clue of what hardware is in the darn thing.

Copy the out put text, from the above command, and simply paste it into code boxes,....
"What we expect you have already Done"

Before doing anything, read the Debian documentation:
Debian Documentation
How to ask the smart way
Debian Foro Español
======================
For the Birds
User avatar
GarryRicketson
 
Posts: 4726
Joined: 2015-01-20 22:16
Location: Durango, Mexico

Re: Installation on i6200U NUC

Postby swmcl » 2018-01-23 21:32

Apologies for listing here and not as a file. I am getting, " Sorry, the board attachment quota has been reached."

The hardware is:

Code: Select all

user@debian:~$ inxi -f

CPU:       Dual core Intel Core i5-6200U (-MCP-) cache: 3072 KB
           clock speeds: max: 2800 MHz 1: 499 MHz 2: 499 MHz
           CPU Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art avx avx2 bmi1 bmi2 bts
           clflush clflushopt cmov constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts eagerfpu epb ept erms est
           f16c flexpriority fma fpu fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify ida intel_pt invpcid
           lahf_lm lm mca mce mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm
           pdpe1gb pebs pge pln pni popcnt pse pse36 pts rdrand rdseed rdtscp rep_good sdbg sep smap smep ss sse
           sse2 sse4_1 sse4_2 ssse3 syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid
           x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr

--------------------------------------------------

user@debian:~$ lspci -vv

00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 08)
   Subsystem: Intel Corporation Skylake Host Bridge/DRAM Registers
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: <access denied>
   Kernel driver in use: skl_uncore

00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07) (prog-if 00 [VGA controller])
   Subsystem: Intel Corporation HD Graphics 520
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 125
   Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M]
   Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
   Region 4: I/O ports at f000 [size=64]
   [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
   Capabilities: <access denied>
   Kernel driver in use: i915
   Kernel modules: i915

00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21) (prog-if 30 [XHCI])
   Subsystem: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 126
   Region 0: Memory at df310000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: <access denied>
   Kernel driver in use: xhci_hcd
   Kernel modules: xhci_pci

00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
   Subsystem: Intel Corporation Sunrise Point-LP Thermal subsystem
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin C routed to IRQ 18
   Region 0: Memory at df32e000 (64-bit, non-prefetchable) [size=4K]
   Capabilities: <access denied>
   Kernel driver in use: intel_pch_thermal
   Kernel modules: intel_pch_thermal

00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
   Subsystem: Intel Corporation Sunrise Point-LP CSME HECI
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 138
   Region 0: Memory at df32d000 (64-bit, non-prefetchable) [size=4K]
   Capabilities: <access denied>
   Kernel driver in use: mei_me
   Kernel modules: mei_me

00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21) (prog-if 01 [AHCI 1.0])
   Subsystem: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 127
   Region 0: Memory at df328000 (32-bit, non-prefetchable) [size=8K]
   Region 1: Memory at df32c000 (32-bit, non-prefetchable) [size=256]
   Region 2: I/O ports at f090 [size=8]
   Region 3: I/O ports at f080 [size=4]
   Region 4: I/O ports at f060 [size=32]
   Region 5: Memory at df32b000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: <access denied>
   Kernel driver in use: ahci
   Kernel modules: ahci

00:1c.0 PCI bridge: Intel Corporation Device 9d12 (rev f1) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin C routed to IRQ 122
   Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
   Memory behind bridge: df200000-df2fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport
   Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation Device 9d13 (rev f1) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin D routed to IRQ 123
   Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
   I/O behind bridge: 0000e000-0000efff
   Memory behind bridge: df100000-df1fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport
   Kernel modules: shpchp

00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 124
   Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
   I/O behind bridge: 0000d000-0000dfff
   Memory behind bridge: df000000-df0fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport
   Kernel modules: shpchp

00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
   Subsystem: Intel Corporation Sunrise Point-LP LPC Controller
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0

00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
   Subsystem: Intel Corporation Sunrise Point-LP PMC
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Region 0: Memory at df324000 (32-bit, non-prefetchable) [size=16K]

00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
   Subsystem: Intel Corporation Sunrise Point-LP HD Audio
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 32
   Interrupt: pin A routed to IRQ 139
   Region 0: Memory at df320000 (64-bit, non-prefetchable) [size=16K]
   Region 4: Memory at df300000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: <access denied>
   Kernel driver in use: snd_hda_intel
   Kernel modules: snd_hda_intel, snd_soc_skl

00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
   Subsystem: Intel Corporation Sunrise Point-LP SMBus
   Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at df32a000 (64-bit, non-prefetchable) [size=256]
   Region 4: I/O ports at f040 [size=32]
   Kernel driver in use: i801_smbus
   Kernel modules: i2c_i801

01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
   Subsystem: Intel Corporation Dual Band Wireless-AC 7260
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 140
   Region 0: Memory at df200000 (64-bit, non-prefetchable) [size=8K]
   Capabilities: <access denied>
   Kernel driver in use: iwlwifi
   Kernel modules: iwlwifi

02:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)
   Subsystem: Intel Corporation I211 Gigabit Network Connection
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 19
   Region 0: Memory at df100000 (32-bit, non-prefetchable) [size=128K]
   Region 2: I/O ports at e000 [size=32]
   Region 3: Memory at df120000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: igb
   Kernel modules: igb

03:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)
   Subsystem: Intel Corporation I211 Gigabit Network Connection
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=128K]
   Region 2: I/O ports at d000 [size=32]
   Region 3: Memory at df020000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: igb
   Kernel modules: igb

-----------------



Thanks.
swmcl
 
Posts: 23
Joined: 2018-01-06 05:17

Re: Installation on i6200U NUC

Postby Head_on_a_Stick » 2018-01-24 06:30

swmcl wrote:Unetbootin is not failing for me. Unetbootin is working.

I can assure you that unetbootin does not work with Debian ISO images.

Read the bug report:

https://bugs.debian.org/cgi-bin/bugrepo ... bug=775689
"Men are born ignorant, not stupid. They are made stupid by education." — Bertrand Russell
User avatar
Head_on_a_Stick
 
Posts: 7204
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: Installation on i6200U NUC

Postby swmcl » 2018-01-25 03:50

OK. unetbootin and Debian are incompatible.

So I've made a USB stick with dd instead.

It still fails during the install process after copying a number of files. The drive to which the installation was directed has a large number of files and directories on it.

The installation fails with a pop-up saying "We're sorry ... installation has failed" and the system is jammed. The only thing I seem to be able to do is remove power.

I think my hardware is a little obtuse or new for now. That is why I tried the testing version and when it recognized even less hardware than the stable installer I got the sh!ts.

Is there a way to install and push the output messages to a file or series of files on a USB key ?

Is there a program I can run from a live Linux OS that makes a compilation of the hardware on my machine so I can then push that file to an online provider who will compile a custom minimalist ISO for my hardware ?

Are there files in the Debian install process that have filenames longer than the Joliet standard of 64 chars ?
swmcl
 
Posts: 23
Joined: 2018-01-06 05:17

Re: Installation on i6200U NUC

Postby Thorny » 2018-01-25 10:10

swmcl wrote:...The installation fails with a pop-up saying "We're sorry ... installation has failed" and the system is jammed. The only thing I seem to be able to do is remove power.

It has been a long time since I have had to use the installer but if I remember correctly, it outputs messages on virtual console 4, so perhaps you could switch to that while the GUI installer is still running and see if the last output gives you any clues.
User avatar
Thorny
 
Posts: 542
Joined: 2011-02-27 13:40

Re: Installation on i6200U NUC

Postby stevepusser » 2018-01-25 18:08

I wrote "inxi -F", not "inxi -f". The outputs are quite different.

I forsee great difficulties ahead for you using Debian if you fail with a simple task like that. :(

Not to mention your unetbootin problem. If it works with one distro does not mean you assume it works for every distro. That's a simple failure of basic logic.
The MX Linux repositories: Backports galore! If we don't have something, just ask and we'll try--we like challenges. New packages: Krita 3.3.3, Pale Moon 27.7.2, Yacreader 9.0, Calligra 3.1, VLC 3.0.0, Firefox 58.0.2, OBS-Studio 21.0.2
User avatar
stevepusser
 
Posts: 9234
Joined: 2009-10-06 05:53

Re: Installation on i6200U NUC

Postby swmcl » 2018-01-25 23:13

Output of inxi -F is as follows:

Code: Select all

user@debian:~$ inxi -F

System:    Host: debian Kernel: 4.9.0-4-amd64 x86_64 (64 bit)
           Desktop: Cinnamon 3.2.7  Distro: Debian GNU/Linux 9 (stretch)
Machine:   Device: desktop System: Default string product: Default string v: Default string
           Mobo: INTEL model: SKYBAY v: Default string
           UEFI: American Megatrends v: 5.11 date: 07/04/2017
CPU:       Dual core Intel Core i5-6200U (-MCP-) cache: 3072 KB
           clock speeds: max: 2800 MHz 1: 499 MHz 2: 499 MHz
Graphics:  Card: Intel HD Graphics 520
           Display Server: X.Org 1.19.2 drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.00hz
           GLX Renderer: Mesa DRI Intel HD Graphics 520 (Skylake GT2)
           GLX Version: 3.0 Mesa 13.0.6
Audio:     Card Intel Sunrise Point-LP HD Audio driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.9.0-4-amd64
Network:   Card-1: Intel Wireless 7260 driver: iwlwifi
           IF: wlp1s0 state: down mac: e6:b4:f7:1c:48:19
           Card-2: Intel I211 Gigabit Network Connection driver: igb
           IF: enp2s0 state: down mac: 00:e2:69:05:f6:9e
           Card-3: Intel I211 Gigabit Network Connection driver: igb
           IF: enp3s0 state: down mac: 00:e2:69:05:f6:9f
Drives:    HDD Total Size: 544.1GB (2.8% used)
           ID-1: /dev/sda model: MTFDDAV512MBF size: 512.1GB
           ID-2: USB /dev/sdb model: Cruzer_Slice size: 32.0GB
Partition: ID-1: / size: 3.9G used: 8.7M (1%) fs: overlay dev: N/A
Sensors:   System Temperatures: cpu: 32.5C mobo: 29.8C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 153 Uptime: 6 min Memory: 602.3/7905.1MB
           Client: Shell (bash) inxi: 2.3.5

swmcl
 
Posts: 23
Joined: 2018-01-06 05:17

Previous

Return to Installation

Who is online

Users browsing this forum: No registered users and 5 guests

fashionable