Can no longer rotate Screen after Updating to Debian 9.5

Help with issues regarding installation of Debian

Can no longer rotate Screen after Updating to Debian 9.5

Postby Kolle » 2018-11-02 15:52

I updated to Debian stable "Stretch" from Jessie. I use an nvidia Geforce 9500 GT graphics adapter.
Under Jessie I could simply set the screen to 90° anti-clockwise in the system settings (which I prefer under most circumstances) and then physically rotate the display 90° clockwise, and fine.

Stretch works fine in landscape mode but in the very moment I apply the rotation in system settings, the show is over. The displayed screen doesn't rotate, but the mouse cursor moves vice versa to the mouse movements. The system does no longer react to mouse klicks or key strokes. After pressing the reset button, the log on screen appears, but I cannot login. The keyboard seems locked,

BTW, Rotation works fine under Knoppix 8.2

Can you please give me any clues, how I can analyze this problem further? I really can't do without portrait mode!

This is what dmesg shows after normal boot in Landscape mode:

[ 0.000000] Linux version 4.9.0-7-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.110-1 (2018-07-05)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-7-amd64 root=UUID=8ce1ed54-1f8e-4c14-8b0b-d3f10b4f0bea ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dfee3000-0x00000000dfeeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xdff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f53f0-0x000f53ff] mapped at [ffff8b31c00f53f0]
[ 0.000000] Base memory trampoline at [ffff8b31c0097000] 97000 size 24576
[ 0.000000] BRK [0xd2939000, 0xd2939fff] PGTABLE
[ 0.000000] BRK [0xd293a000, 0xd293afff] PGTABLE
[ 0.000000] BRK [0xd293b000, 0xd293bfff] PGTABLE
[ 0.000000] BRK [0xd293c000, 0xd293cfff] PGTABLE
[ 0.000000] BRK [0xd293d000, 0xd293dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35ccf000-0x36e5efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6DF0 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 0x00000000DFEE3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 0x00000000DFEE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 0x00000000DFEE3180 004CCF (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 0x00000000DFEE0000 000040
[ 0.000000] ACPI: HPET 0x00000000DFEE7FC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 0x00000000DFEE8040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 0x00000000DFEE8080 0064B2 (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.000000] ACPI: APIC 0x00000000DFEE7EC0 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 0x00000000DFEEEBA0 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11fff7000-0x11fffbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfedffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[ 0.000000] On node 0 totalpages: 1048188
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14268 pages used for memmap
[ 0.000000] DMA32 zone: 913120 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfee0000-0xdfee2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfee3000-0xdfeeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfef0000-0xdfefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdff00000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xdff00000-0xf3ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8b32dfc00000 s105304 r8192 d29864 u524288
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031787
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-7-amd64 root=UUID=8ce1ed54-1f8e-4c14-8b0b-d3f10b4f0bea ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4026904K/4192752K available (6250K kernel code, 1159K rwdata, 2868K rodata, 1420K init, 688K bss, 165848K reserved, 0K cma-reserved)
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2997.321 MHz processor
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5994.64 BogoMIPS (lpj=11989284)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004030] ACPI: Core revision 20160831
[ 0.009842] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.009896] Security Framework initialized
[ 0.009898] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009905] AppArmor: AppArmor disabled by boot time parameter
[ 0.010143] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011655] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012351] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.012355] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.012673] CPU: Physical Processor ID: 0
[ 0.012674] CPU: Processor Core ID: 0
[ 0.012676] mce: CPU supports 6 MCE banks
[ 0.012682] CPU0: Thermal monitoring enabled (TM2)
[ 0.012685] process: using mwait in idle threads
[ 0.012690] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.012690] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.012692] Spectre V2 : Mitigation: Full generic retpoline
[ 0.012693] Speculative Store Bypass: Vulnerable
[ 0.013049] Freeing SMP alternatives memory: 24K
[ 0.015164] ftrace: allocating 25269 entries in 99 pages
[ 0.036051] smpboot: Max logical packages: 2
[ 0.036408] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.080000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.080000] ... version: 2
[ 0.080000] ... bit width: 40
[ 0.080000] ... generic registers: 2
[ 0.080000] ... value mask: 000000ffffffffff
[ 0.080000] ... max period: 000000007fffffff
[ 0.080000] ... fixed-purpose events: 3
[ 0.080000] ... event mask: 0000000700000003
[ 0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080000] x86: Booting SMP configuration:
[ 0.080000] .... node #0, CPUs: #1
[ 0.080000] x86: Booted up 1 node, 2 CPUs
[ 0.080000] smpboot: Total of 2 processors activated (11989.28 BogoMIPS)
[ 0.080220] devtmpfs: initialized
[ 0.080220] x86/mm: Memory block size: 128MB
[ 0.084002] PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee2fff] (12288 bytes)
[ 0.084002] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.084002] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.084002] pinctrl core: initialized pinctrl subsystem
[ 0.084002] NET: Registered protocol family 16
[ 0.092005] cpuidle: using governor ladder
[ 0.108004] cpuidle: using governor menu
[ 0.108032] ACPI: bus type PCI registered
[ 0.108034] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.108079] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.108081] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.108085] pmd_set_huge: Cannot satisfy [mem 0xf4000000-0xf4200000] with a huge-page mapping due to MTRR override.
[ 0.108187] PCI: Using configuration type 1 for base access
[ 0.124058] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.124058] ACPI: Added _OSI(Module Device)
[ 0.124058] ACPI: Added _OSI(Processor Device)
[ 0.124058] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.124058] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.130426] ACPI: Dynamic OEM Table Load:
[ 0.130431] ACPI: SSDT 0xFFFF8B32DA6CBC00 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.130575] ACPI: Dynamic OEM Table Load:
[ 0.130579] ACPI: SSDT 0xFFFF8B32DA6BD400 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.130855] ACPI: Interpreter enabled
[ 0.130868] ACPI: (supports S0 S3 S4 S5)
[ 0.130869] ACPI: Using IOAPIC for interrupt routing
[ 0.130887] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.135172] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.135176] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.135180] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.135385] PCI host bridge to bus 0000:00
[ 0.135387] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.135389] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.135390] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.135392] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.135393] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff window]
[ 0.135395] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.135402] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
[ 0.135419] DMAR: Forcing write-buffer flush capability
[ 0.135420] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.135497] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
[ 0.135527] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.135619] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.135653] pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
[ 0.135724] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.135765] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.135798] pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.135868] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.135908] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.135941] pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.136017] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.136062] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.136075] pci 0000:00:1a.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.136177] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.136220] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.136233] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.136291] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.136338] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.136379] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.136436] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.136482] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.136529] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.136562] pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.136632] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.136673] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.136706] pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
[ 0.136776] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.136816] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.136850] pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
[ 0.136920] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.136964] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.136977] pci 0000:00:1d.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.137077] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.137117] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.137194] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.137238] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
[ 0.137394] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.137406] pci 0000:00:1f.2: reg 0x10: [io 0xf900-0xf907]
[ 0.137412] pci 0000:00:1f.2: reg 0x14: [io 0xf800-0xf803]
[ 0.137418] pci 0000:00:1f.2: reg 0x18: [io 0xf700-0xf707]
[ 0.137424] pci 0000:00:1f.2: reg 0x1c: [io 0xf600-0xf603]
[ 0.137430] pci 0000:00:1f.2: reg 0x20: [io 0xf500-0xf51f]
[ 0.137436] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffd000-0xfdffd7ff]
[ 0.137470] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.137548] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.137560] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffc000-0xfdffc0ff 64bit]
[ 0.137576] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.137695] pci 0000:01:00.0: [10de:0640] type 00 class 0x030000
[ 0.137705] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.137713] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.137721] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.137727] pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f]
[ 0.137733] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.137816] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.137818] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.137820] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.137823] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.137887] pci 0000:02:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.137923] pci 0000:02:00.0: reg 0x10: [mem 0xfdefe000-0xfdefffff 64bit]
[ 0.138101] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.148021] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.148027] pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.148085] pci 0000:03:03.0: [10ec:8169] type 00 class 0x020000
[ 0.148101] pci 0000:03:03.0: reg 0x10: [io 0xde00-0xdeff]
[ 0.148110] pci 0000:03:03.0: reg 0x14: [mem 0xfddff000-0xfddff0ff]
[ 0.148150] pci 0000:03:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.148180] pci 0000:03:03.0: supports D1 D2
[ 0.148182] pci 0000:03:03.0: PME# supported from D1 D2 D3hot D3cold
[ 0.148242] pci 0000:03:04.0: [1000:0001] type 00 class 0x000000
[ 0.148253] pci 0000:03:04.0: reg 0x10: [io 0xdc00-0xdcff]
[ 0.148261] pci 0000:03:04.0: reg 0x14: [mem 0xfddfe000-0xfddfe0ff]
[ 0.148300] pci 0000:03:04.0: NCR 53c810 rev 1 PCI class overridden (0x000000 -> 0x010000)
[ 0.148364] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.148367] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.148369] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.148374] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.148375] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.148377] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.148378] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.148380] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff window] (subtractive decode)
[ 0.148904] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.148956] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.149007] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.149058] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.149109] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.149159] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ 0.149209] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.149260] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.149417] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.149417] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.149417] vgaarb: loaded
[ 0.149417] vgaarb: bridge control possible 0000:01:00.0
[ 0.149417] dmi: Firmware registration failed.
[ 0.149417] PCI: Using ACPI for IRQ routing
[ 0.149417] PCI: pci_cache_line_size set to 64 bytes
[ 0.149417] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.149417] e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff]
[ 0.149417] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.149417] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.149417] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.152012] clocksource: Switched to clocksource hpet
[ 0.159087] VFS: Disk quotas dquot_6.6.0
[ 0.159115] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.159207] pnp: PnP ACPI init
[ 0.159383] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.159385] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.159387] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.159388] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.159390] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.159393] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.159464] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.159708] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.159891] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.159990] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.160042] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.160103] system 00:06: [io 0x0400-0x04cf] has been reserved
[ 0.160105] system 00:06: [io 0x04d2-0x04ff] has been reserved
[ 0.160108] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.160295] system 00:07: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.160297] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.160462] system 00:08: [mem 0x000d2800-0x000d3fff] has been reserved
[ 0.160464] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.160465] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.160467] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.160469] system 00:08: [mem 0xdfee0000-0xdfefffff] could not be reserved
[ 0.160470] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.160472] system 00:08: [mem 0x00100000-0xdfedffff] could not be reserved
[ 0.160474] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.160476] system 00:08: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.160477] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.160479] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.160481] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.160483] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.160484] system 00:08: [mem 0x000e0000-0x000effff] has been reserved
[ 0.160487] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.160492] pnp: PnP ACPI: found 9 devices
[ 0.166911] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.166926] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.166928] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.166938] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.166940] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.166941] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.166943] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.166949] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.166951] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.166954] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
[ 0.166956] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.166958] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.166961] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.166963] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.166966] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.166968] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.166971] pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.166974] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.166979] pci 0000:03:03.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 0.166980] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.166982] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.166986] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.166992] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.166993] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.166995] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.166996] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.166997] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff window]
[ 0.166999] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.167000] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.167002] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.167003] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.167005] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.167006] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.167008] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.167009] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.167010] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.167012] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.167013] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.167014] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.167016] pci_bus 0000:03: resource 8 [mem 0xdff00000-0xfebfffff window]
[ 0.167089] NET: Registered protocol family 2
[ 0.167262] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.167364] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.167531] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.167567] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.167591] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.167651] NET: Registered protocol family 1
[ 0.168671] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.168678] pci 0000:00:1c.0: enabling device (0006 -> 0007)
[ 0.168813] PCI: CLS 4 bytes, default 64
[ 0.168854] Unpacking initramfs...
[ 0.454704] Freeing initrd memory: 17984K
[ 0.454721] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.454724] software IO TLB [mem 0xdbee0000-0xdfee0000] (64MB) mapped at [ffff8b329bee0000-ffff8b329fedffff]
[ 0.455170] audit: initializing netlink subsys (disabled)
[ 0.455197] audit: type=2000 audit(1541164186.452:1): initialized
[ 0.455585] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.455610] zbud: loaded
[ 0.456357] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.456383] io scheduler noop registered
[ 0.456384] io scheduler deadline registered
[ 0.456395] io scheduler cfq registered (default)
[ 0.456702] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.456707] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.456720] intel_idle: does not run on family 6 model 23
[ 0.456734] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.456896] GHES: HEST is not enabled!
[ 0.456953] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.477346] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.477702] Linux agpgart interface v0.103
[ 0.477830] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.477831] AMD IOMMUv2 functionality not available on this system
[ 0.477999] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.478353] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.478359] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.478538] mousedev: PS/2 mouse device common for all mice
[ 0.478591] rtc_cmos 00:01: RTC can wake from S4
[ 0.478716] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.478735] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.478755] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.478756] dmi-sysfs: dmi entry is absent.
[ 0.478904] NET: Registered protocol family 10
[ 0.479098] mip6: Mobile IPv6
[ 0.479100] NET: Registered protocol family 17
[ 0.479102] mpls_gso: MPLS GSO support
[ 0.479231] microcode: sig=0x1067a, pf=0x1, revision=0xa07
[ 0.479265] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.479385] registered taskstats version 1
[ 0.479396] zswap: loaded using pool lzo/zbud
[ 0.479462] ima: No TPM chip found, activating TPM-bypass!
[ 0.479463] ima: Allocated hash algorithm: sha256
[ 0.479701] rtc_cmos 00:01: setting system clock to 2018-11-02 13:09:46 UTC (1541164186)
[ 0.479736] PM: Hibernation image not present or could not be loaded.
[ 0.480960] Freeing unused kernel memory: 1420K
[ 0.480961] Write protecting the kernel read-only data: 12288k
[ 0.481665] Freeing unused kernel memory: 1928K
[ 0.484259] Freeing unused kernel memory: 1228K
[ 0.489150] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.500246] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.501144] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.501231] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.501242] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.530493] ACPI: bus type USB registered
[ 0.530518] usbcore: registered new interface driver usbfs
[ 0.530528] usbcore: registered new interface driver hub
[ 0.530552] usbcore: registered new device driver usb
[ 0.530987] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.531255] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.531381] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.531387] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.531393] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.531420] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 0.531466] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.531468] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.531469] usb usb1: Product: UHCI Host Controller
[ 0.531470] usb usb1: Manufacturer: Linux 4.9.0-7-amd64 uhci_hcd
[ 0.531472] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.531585] hub 1-0:1.0: USB hub found
[ 0.531591] hub 1-0:1.0: 2 ports detected
[ 0.531757] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.531762] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 0.531767] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.531788] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 0.532073] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.532075] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.532076] usb usb2: Product: UHCI Host Controller
[ 0.532077] usb usb2: Manufacturer: Linux 4.9.0-7-amd64 uhci_hcd
[ 0.532079] usb usb2: SerialNumber: 0000:00:1a.1
[ 0.532179] hub 2-0:1.0: USB hub found
[ 0.532184] hub 2-0:1.0: 2 ports detected
[ 0.533132] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.533137] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 0.533142] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.533164] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 0.533204] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.533206] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.533207] usb usb3: Product: UHCI Host Controller
[ 0.533208] usb usb3: Manufacturer: Linux 4.9.0-7-amd64 uhci_hcd
[ 0.533210] usb usb3: SerialNumber: 0000:00:1a.2
[ 0.533316] hub 3-0:1.0: USB hub found
[ 0.533321] hub 3-0:1.0: 2 ports detected
[ 0.533482] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.533486] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.533491] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.533512] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 0.533552] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.533553] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.533555] usb usb4: Product: UHCI Host Controller
[ 0.533556] usb usb4: Manufacturer: Linux 4.9.0-7-amd64 uhci_hcd
[ 0.533557] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.533653] hub 4-0:1.0: USB hub found
[ 0.533659] hub 4-0:1.0: 2 ports detected
[ 0.533816] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.533821] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 0.533825] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.533846] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 0.533889] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.533891] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.533892] usb usb5: Product: UHCI Host Controller
[ 0.533894] usb usb5: Manufacturer: Linux 4.9.0-7-amd64 uhci_hcd
[ 0.533895] usb usb5: SerialNumber: 0000:00:1d.1
[ 0.533992] hub 5-0:1.0: USB hub found
[ 0.533997] hub 5-0:1.0: 2 ports detected
[ 0.534143] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.534148] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 0.534153] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.534168] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 0.534207] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.534209] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.534210] usb usb6: Product: UHCI Host Controller
[ 0.534211] usb usb6: Manufacturer: Linux 4.9.0-7-amd64 uhci_hcd
[ 0.534213] usb usb6: SerialNumber: 0000:00:1d.2
[ 0.534308] hub 6-0:1.0: USB hub found
[ 0.534313] hub 6-0:1.0: 2 ports detected
[ 0.537064] ehci-pci: EHCI PCI platform driver
[ 0.537797] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.537802] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 0.541724] ehci-pci 0000:00:1a.7: cache line size of 4 is not supported
[ 0.542030] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 0.546654] SCSI subsystem initialized
[ 0.549060] libata version 3.00 loaded.
[ 0.549564] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.549660] r8169 0000:03:03.0 (unnamed net_device) (uninitialized): not PCI Express
[ 0.549932] r8169 0000:03:03.0 eth0: RTL8169sb/8110sb at 0xffffae4580659000, 00:08:54:58:22:59, XID 10000000 IRQ 16
[ 0.549934] r8169 0000:03:03.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 0.551339] sym0: <810> rev 0x1 at pci 0000:03:04.0 irq 20
[ 0.553515] sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
[ 0.556096] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.556146] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.556148] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.556150] usb usb7: Product: EHCI Host Controller
[ 0.556151] usb usb7: Manufacturer: Linux 4.9.0-7-amd64 ehci_hcd
[ 0.556152] usb usb7: SerialNumber: 0000:00:1a.7
[ 0.556267] hub 7-0:1.0: USB hub found
[ 0.556274] hub 7-0:1.0: 6 ports detected
[ 0.556002] sym0: SCSI BUS has been reset.
[ 0.559963] scsi host0: sym-2.2.3
[ 0.584090] hub 1-0:1.0: USB hub found
[ 0.584102] hub 1-0:1.0: 2 ports detected
[ 0.612084] hub 2-0:1.0: USB hub found
[ 0.612096] hub 2-0:1.0: 2 ports detected
[ 0.640083] hub 3-0:1.0: USB hub found
[ 0.640094] hub 3-0:1.0: 2 ports detected
[ 0.640207] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.640215] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 0.645521] xhci_hcd 0000:02:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[ 0.645655] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.645657] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.645658] usb usb8: Product: xHCI Host Controller
[ 0.645659] usb usb8: Manufacturer: Linux 4.9.0-7-amd64 xhci-hcd
[ 0.645661] usb usb8: SerialNumber: 0000:02:00.0
[ 0.645768] hub 8-0:1.0: USB hub found
[ 0.645777] hub 8-0:1.0: 2 ports detected
[ 0.645874] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.645878] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 0.649025] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.649042] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.649043] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.649045] usb usb9: Product: xHCI Host Controller
[ 0.649046] usb usb9: Manufacturer: Linux 4.9.0-7-amd64 xhci-hcd
[ 0.649047] usb usb9: SerialNumber: 0000:02:00.0
[ 0.649150] hub 9-0:1.0: USB hub found
[ 0.649159] hub 9-0:1.0: 2 ports detected
[ 0.700162] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.700170] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 10
[ 0.704084] ehci-pci 0000:00:1d.7: cache line size of 4 is not supported
[ 0.704088] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 0.720013] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.720070] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.720073] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.720075] usb usb10: Product: EHCI Host Controller
[ 0.720077] usb usb10: Manufacturer: Linux 4.9.0-7-amd64 ehci_hcd
[ 0.720079] usb usb10: SerialNumber: 0000:00:1d.7
[ 0.720226] hub 10-0:1.0: USB hub found
[ 0.720232] hub 10-0:1.0: 6 ports detected
[ 0.748068] hub 4-0:1.0: USB hub found
[ 0.748076] hub 4-0:1.0: 2 ports detected
[ 0.776073] hub 5-0:1.0: USB hub found
[ 0.776081] hub 5-0:1.0: 2 ports detected
[ 0.804070] hub 6-0:1.0: USB hub found
[ 0.804078] hub 6-0:1.0: 2 ports detected
[ 0.804273] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.804766] ahci 0000:00:1f.2: version 3.0
[ 0.804884] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.804914] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.804917] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
[ 0.864668] scsi host1: ahci
[ 0.864758] scsi host2: ahci
[ 0.864843] scsi host3: ahci
[ 0.864931] scsi host4: ahci
[ 0.865013] scsi host5: ahci
[ 0.865099] scsi host6: ahci
[ 0.865152] ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 29
[ 0.865154] ata2: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 29
[ 0.865155] ata3: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd200 irq 29
[ 0.865157] ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 29
[ 0.865158] ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 29
[ 0.865159] ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 29
[ 0.974417] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 115
[ 1.048016] usb 10-4: new high-speed USB device number 2 using ehci-pci
[ 1.178074] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.198005] usb 10-4: New USB device found, idVendor=058f, idProduct=6362
[ 1.198007] usb 10-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.198009] usb 10-4: Product: Mass Storage Device
[ 1.198011] usb 10-4: Manufacturer: Generic
[ 1.198013] usb 10-4: SerialNumber: 058F63626476
[ 1.199828] usb-storage 10-4:1.0: USB Mass Storage device detected
[ 1.199961] scsi host7: usb-storage 10-4:1.0
[ 1.200034] usbcore: registered new interface driver usb-storage
[ 1.200304] usbcore: registered new interface driver uas
[ 1.468013] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b34628b331, max_idle_ns: 440795272275 ns
[ 1.478273] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 2.204777] scsi 7:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 2.205393] scsi 7:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 2.206017] scsi 7:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 2.206642] scsi 7:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0
[ 5.689639] sd 7:0:0:0: [sda] Attached SCSI removable disk
[ 5.690264] sd 7:0:0:1: [sdb] Attached SCSI removable disk
[ 5.691374] random: fast init done
[ 5.696641] sd 7:0:0:2: [sdc] Attached SCSI removable disk
[ 5.701639] sd 7:0:0:3: [sdd] Attached SCSI removable disk
[ 6.156018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.158998] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
[ 6.162815] ata2.00: configured for UDMA/100
[ 6.171444] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
[ 6.494130] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.806140] ata4: SATA link down (SStatus 0 SControl 300)
[ 7.280016] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.280321] ata5.00: supports DRM functions and may not be fully accessible
[ 7.281139] ata5.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT01B6Q, max UDMA/133
[ 7.281141] ata5.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 7.281962] ata5.00: supports DRM functions and may not be fully accessible
[ 7.283201] ata5.00: configured for UDMA/133
[ 7.283353] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
[ 7.316220] ata5.00: Enabling discard_zeroes_data
[ 7.316230] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 7.316298] sd 5:0:0:0: [sde] Write Protect is off
[ 7.316300] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 7.316320] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.316411] ata5.00: Enabling discard_zeroes_data
[ 7.317404] sde: sde1 sde2 sde3 sde4 < sde5 sde6 sde7 sde8 sde9 sde10 >
[ 7.317883] ata5.00: Enabling discard_zeroes_data
[ 7.317984] sd 5:0:0:0: [sde] Attached SCSI disk
[ 7.630121] ata6: SATA link down (SStatus 0 SControl 300)
[ 7.652344] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.652347] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.652548] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 7.786002] PM: Starting manual resume from disk
[ 7.786005] PM: Hibernation image partition 8:71 present
[ 7.786006] PM: Looking for hibernation image.
[ 7.786179] PM: Image not found (code -22)
[ 7.786181] PM: Hibernation image not present or could not be loaded.
[ 7.902678] EXT4-fs (sde10): mounted filesystem with ordered data mode. Opts: (null)
[ 7.986471] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 8.001625] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.007489] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 8.007560] systemd[1]: Detected architecture x86-64.
[ 8.007744] systemd[1]: Set hostname to <Schorsch>.
[ 8.078117] systemd[1]: Listening on udev Control Socket.
[ 8.078237] systemd[1]: Listening on Journal Audit Socket.
[ 8.078273] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.078333] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.078368] systemd[1]: Listening on udev Kernel Socket.
[ 8.078409] systemd[1]: Listening on Syslog Socket.
[ 8.078567] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.096001] EXT4-fs (sde10): re-mounted. Opts: errors=remount-ro
[ 8.100198] lp: driver loaded but no devices found
[ 8.105529] ppdev: user-space parallel port driver
[ 8.106296] parport_pc 00:03: reported by Plug and Play ACPI
[ 8.106360] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.110727] RPC: Registered named UNIX socket transport module.
[ 8.110728] RPC: Registered udp transport module.
[ 8.110729] RPC: Registered tcp transport module.
[ 8.110729] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.200086] lp0: using parport0 (interrupt-driven).
[ 8.250340] systemd-journald[214]: Received request to flush runtime journal from PID 1
[ 8.262511] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 8.262516] ACPI: Power Button [PWRB]
[ 8.262592] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.262594] ACPI: Power Button [PWRF]
[ 8.296276] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.320596] [drm] Initialized
[ 8.323604] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20160831/utaddress-247)
[ 8.323609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.323636] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.334896] wmi: Mapper loaded
[ 8.337649] sd 7:0:0:0: Attached scsi generic sg0 type 0
[ 8.337787] sd 7:0:0:1: Attached scsi generic sg1 type 0
[ 8.338496] sd 7:0:0:2: Attached scsi generic sg2 type 0
[ 8.340984] sd 7:0:0:3: Attached scsi generic sg3 type 0
[ 8.341626] sr 2:0:0:0: Attached scsi generic sg4 type 5
[ 8.342487] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 8.342798] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.354230] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 8.354232] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.354234] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.354235] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 8.354237] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 8.354238] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 8.354240] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 8.354242] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 8.354243] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 8.354245] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
[ 8.379657] nouveau 0000:01:00.0: NVIDIA G96 (096000c1)
[ 8.403483] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 8.404217] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.404291] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.404666] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.404732] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.448888] intel_powerclamp: No package C-state available
[ 8.551818] nouveau 0000:01:00.0: bios: version 62.94.3c.00.00
[ 8.555582] Adding 7811068k swap on /dev/sde6. Priority:-1 extents:1 across:7811068k SSFS
[ 8.556098] Adding 7811068k swap on /dev/sde7. Priority:-2 extents:1 across:7811068k SSFS
[ 8.589479] iTCO_vendor_support: vendor-support=0
[ 8.590610] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.590648] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0460)
[ 8.591494] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.602238] nouveau 0000:01:00.0: bios: M0203T not found
[ 8.602240] nouveau 0000:01:00.0: bios: M0203E not matched!
[ 8.602242] nouveau 0000:01:00.0: fb: 1024 MiB DDR2
[ 8.689095] [TTM] Zone kernel: Available graphics memory: 2024744 kiB
[ 8.689096] [TTM] Initializing pool allocator
[ 8.689101] [TTM] Initializing DMA pool allocator
[ 8.689122] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 8.689124] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 8.689127] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 8.689129] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 8.689131] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000028
[ 8.689133] nouveau 0000:01:00.0: DRM: DCB outp 01: 04000302 00020030
[ 8.689134] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028
[ 8.689136] nouveau 0000:01:00.0: DRM: DCB outp 03: 02022332 00c200a0
[ 8.689138] nouveau 0000:01:00.0: DRM: DCB conn 00: 01000030
[ 8.689139] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[ 8.689140] nouveau 0000:01:00.0: DRM: DCB conn 02: 00020261
[ 8.696513] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.696514] [drm] Driver supports precise vblank timestamp query.
[ 8.957486] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[ 9.027455] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x70000, bo ffff8b32d5599400
[ 9.027528] fbcon: nouveaufb (fb0) is primary device
[ 9.148754] Console: switching to colour frame buffer device 160x64
[ 9.150350] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 9.164019] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 9.270080] fuse init (API version 7.26)
[ 10.072045] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.112258] r8169 0000:03:03.0 eth0: link down
[ 10.112277] r8169 0000:03:03.0 eth0: link down
[ 10.112381] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.886959] random: crng init done
[ 10.886961] random: 7 urandom warning(s) missed due to ratelimiting
[ 11.771376] r8169 0000:03:03.0 eth0: link up
[ 11.771391] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Kolle
 
Posts: 2
Joined: 2018-11-02 15:29

Re: Can no longer rotate Screen after Updating to Debian 9.5

Postby Kolle » 2018-11-03 17:05

I found out, that there is a significant difference in the nouveau-section of dmesg:

with Jessie, it was:

> [ 7.909231] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x096000c1
> [ 7.909235] nouveau [ DEVICE][0000:01:00.0] Chipset: G96 (NV96)
> [ 7.909237] nouveau [ DEVICE][0000:01:00.0] Family : NV50
> [ 7.909266] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
> [ 7.957606] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
> [ 7.957609] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
> [ 7.957699] nouveau [ VBIOS][0000:01:00.0] BIT signature found
> [ 7.957702] nouveau [ VBIOS][0000:01:00.0] version 62.94.3c.00.00
> [ 7.981298] nouveau 0000:01:00.0: irq 47 for MSI/MSI-X
> [ 7.981310] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
> [ 7.982008] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
> [ 7.982011] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
> [ 7.982013] nouveau [ PFB][0000:01:00.0] ZCOMP: 2048 tags

> [ 8.058036] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
> [ 8.058058] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
> [ 8.058090] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
> [ 8.058126] nouveau [ CLK][0000:01:00.0] 0f: core 550 MHz shader 1400 MHz memory 400 MHz
> [ 8.058161] nouveau [ CLK][0000:01:00.0] --: core 400 MHz shader 800 MHz memory 399 MHz
> [ 8.058855] [TTM] Zone kernel: Available graphics memory: 2028674 kiB
> [ 8.058857] [TTM] Initializing pool allocator
> [ 8.058862] [TTM] Initializing DMA pool allocator
> [ 8.058879] nouveau [ DRM] VRAM: 1024 MiB
> [ 8.058880] nouveau [ DRM] GART: 1048576 MiB
> [ 8.058884] nouveau [ DRM] TMDS table version 2.0
> [ 8.058886] nouveau [ DRM] DCB version 4.0
> [ 8.058888] nouveau [ DRM] DCB outp 00: 02000300 00000028
> [ 8.058890] nouveau [ DRM] DCB outp 01: 04000302 00020030
> [ 8.058892] nouveau [ DRM] DCB outp 02: 04011310 00000028
> [ 8.058894] nouveau [ DRM] DCB outp 03: 02022332 00c200a0
> [ 8.058896] nouveau [ DRM] DCB conn 00: 01000030
> [ 8.058898] nouveau [ DRM] DCB conn 01: 00000100
> [ 8.058900] nouveau [ DRM] DCB conn 02: 00020261
> [ 8.068476] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 8.068478] [drm] Driver supports precise vblank timestamp query.
> [ 8.071259] iTCO_vendor_support: vendor-support=0
> [ 8.071696] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
> [ 8.071725] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0460)
> [ 8.073025] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 8.143448] EXT4-fs (sdf10): re-mounted. Opts: errors=remount-ro
> [ 8.251927] systemd-journald[177]: Received request to flush runtime journal from PID 1
> [ 8.327282] nouveau [ DRM] MM: using CRYPT for buffer copies
> [ 8.404047] nouveau [ DRM] allocated 1280x1024 fb: 0x70000, bo ffff88003689a000
> [ 8.404254] fbcon: nouveaufb (fb0) is primary device
> [ 8.404315] RPC: Registered named UNIX socket transport module.
> [ 8.404315] RPC: Registered udp transport module.
> [ 8.404316] RPC: Registered tcp transport module.
> [ 8.404316] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 8.407038] FS-Cache: Loaded
> [ 8.414014] FS-Cache: Netfs 'nfs' registered for caching
> [ 8.422148] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [ 8.473417] Console: switching to colour frame buffer device 160x64
> [ 8.474887] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
> [ 8.474889] nouveau 0000:01:00.0: registered panic notifier
> [ 8.488028] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0



Is this the problem with Stretch?:

[ 8.602238] nouveau 0000:01:00.0: bios: M0203T not found
[ 8.602240] nouveau 0000:01:00.0: bios: M0203E not matched!
Kolle
 
Posts: 2
Joined: 2018-11-02 15:29


Return to Installation

Who is online

Users browsing this forum: No registered users and 6 guests

fashionable