Debian Buster installation

[rameshiyer]

No desktop either booting from USB or from hard disk installation. ( Debian Buster - gnome desktop). It shows starts from hibernation, then struck there.

[ruwolf]

What is your hardware?

[rameshiyer]

Intel Xeon CUP E# 1270, 3.8 GHz, RAM 16 Gb, 64 bit. Debian 9 working without problem. Now I would like to test my Network printer Canon adv 4225 in Buster 10.

[ruwolf]

Quite old hardware, it should work.
Can you tell exact name of desktop or motherboard?

[rameshiyer]

Operating System
Windows 10 Pro for Workstations 64-bit
CPU
Intel Xeon E3-1270 v6 @ 3.80GHz 41 °C
Kaby Lake 14nm Technology
RAM
16.0GB Dual-Channel Unknown @ 1197MHz (17-17-17-39)
Motherboard
Dell Inc. 02K9CR (U3E1)
Graphics
DELL E2216H (1920x1080@60Hz)
2048MB ATI AMD FirePro W4100 Graphics Adapter (Dell) 45 °C
Storage
931GB TOSHIBA DT01ACA100 (SATA ) 37 °C
Optical Drives
No optical disk drives detected
Audio
Realtek Audio
Operating System
Windows 10 Pro for Workstations 64-bit
Computer type: Desktop

[ruwolf]

It seems to be something like Dell Precision T3420, isn't it?
What exactly do you see on the monitor?
Have both bootings the same or different behaviour?

[rameshiyer]

Dell Computer. Both shows same message. However, the same machine another partition, Debian 9 is booting without problem.

[ruwolf]

You are very brief. Can you switch to virtual consoles (by [left Alt]+[Ctrl]+[F1] etc.) after struck?

[rameshiyer]

Sir
Sorry for the delay in reply. The key combination is not working. I have downloaded the live ISO still got the same problem. No display at all. Showing "Resuming from Hibernation". Even after so many trail and error. After that I took assistance of my colleague, he identified the problem is display driver.(AMD Graphics card? etc) After that he made temporary internet connections through command line and downloaded something from website like "contrib" and "non-free" items. etc. after then system rebooted to display.

Sir i dont know this is right place to ask question which is not connection with installation. How to run cngplp in root. i am getting following error
ram@debian:~$ su
Password:
root@debian:/home/ram# cngplp
No protocol specified

(cngplp:2846): Gtk-WARNING **: 08:14:28.083: cannot open display: :0
root@debian:/home/ram#
without root cngplp working. However, I am unable to "access job accounting". please help me.

[ruwolf]

You should ask different question in new post, not in this thread.
Which printer do you have from Canon?