Debian v9.4 (stretch)
OpenMediaVault 4
Hardware- RaspberryPi 4
1. Tried to boot from a clean SD card (new etcher install, etcher reported success)
2. Added a user as sudo
3. ssh with this user, and did dmesg | grep brcm. It shows-
$ dmesg | grep brcm
[ 0.217768] brcm-pcie fd500000.pcie: could not get clock
[ 0.217824] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.217860] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
[ 0.281578] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
[ 0.281824] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.845561] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
[ 4.913222] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 4.923550] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 4.923887] usbcore: registered new interface driver brcmfmac
[ 4.938906] brcmfmac mmc11: Direct firmware load for brcm/brcmfmac43455-sdio.txt failed with error -2
[ 5.941662] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
Please help!
Thanks,
Sam
Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230
RPI4 OMV4 WiFi issue- Direct firmware load brcm* failed -2
-
- Posts: 2
- Joined: 2019-07-21 23:38
- sunrat
- Administrator
- Posts: 6498
- Joined: 2006-08-29 09:12
- Location: Melbourne, Australia
- Has thanked: 118 times
- Been thanked: 476 times
Re: RPI4 OMV4 WiFi issue- Direct firmware load brcm* failed
RPi4 is pretty new hardware. It probably requires drivers not available in Stretch.
“ computer users can be divided into 2 categories:
Those who have lost data
...and those who have not lost data YET ” Remember to BACKUP!
Those who have lost data
...and those who have not lost data YET ” Remember to BACKUP!
-
- Posts: 2
- Joined: 2019-07-21 23:38
Re: RPI4 OMV4 WiFi issue- Direct firmware load brcm* failed
Another update-
I followed steps in this thread and the driver/firmware seems to work-
https://www.linuxquestions.org/question ... 175627137/
Now the output of dmesg is-
root@raspberrypi:/usr/src# dmesg | grep brcm
[ 0.217743] brcm-pcie fd500000.pcie: could not get clock
[ 0.217799] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.217834] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
[ 0.271557] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
[ 0.271802] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.825373] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
[ 3.190740] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 3.199930] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 3.200543] usbcore: registered new interface driver brcmfmac
[ 4.331921] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[ 5.341649] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
However even with this, cannot use WiFi-
iwconfig
eth0 no wireless extensions.
lo no wireless extensions.
nmtui does not show wireless yet.
I also tried connecting external USB3.0 rtl8812au WiFi Dongle, it gets detected and drivers are installed. But iwconfig / nmtui does not show WiFI.
Something seems wrong in OMV 4 for RPI?
Why is this happening?
Please help!
I followed steps in this thread and the driver/firmware seems to work-
https://www.linuxquestions.org/question ... 175627137/
Now the output of dmesg is-
root@raspberrypi:/usr/src# dmesg | grep brcm
[ 0.217743] brcm-pcie fd500000.pcie: could not get clock
[ 0.217799] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.217834] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
[ 0.271557] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
[ 0.271802] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.825373] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
[ 3.190740] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 3.199930] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 3.200543] usbcore: registered new interface driver brcmfmac
[ 4.331921] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[ 5.341649] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
However even with this, cannot use WiFi-
iwconfig
eth0 no wireless extensions.
lo no wireless extensions.
nmtui does not show wireless yet.
I also tried connecting external USB3.0 rtl8812au WiFi Dongle, it gets detected and drivers are installed. But iwconfig / nmtui does not show WiFI.
Something seems wrong in OMV 4 for RPI?
Why is this happening?
Please help!
- sunrat
- Administrator
- Posts: 6498
- Joined: 2006-08-29 09:12
- Location: Melbourne, Australia
- Has thanked: 118 times
- Been thanked: 476 times
Re: RPI4 OMV4 WiFi issue- Direct firmware load brcm* failed
You may need firmware-realtek for the USB wifi.
I don't have a RPi yet but thinking about getting one and I would certainly use Raspbian as it's set up to support the hardware. There is an installer available which includes Raspian Buster -
https://www.raspberrypi.org/forums/view ... p?t=142574
I don't have a RPi yet but thinking about getting one and I would certainly use Raspbian as it's set up to support the hardware. There is an installer available which includes Raspian Buster -
https://www.raspberrypi.org/forums/view ... p?t=142574
“ computer users can be divided into 2 categories:
Those who have lost data
...and those who have not lost data YET ” Remember to BACKUP!
Those who have lost data
...and those who have not lost data YET ” Remember to BACKUP!