Installation FC Storage (Q-Logic QLE2692)

Help with issues regarding installation of Debian

Installation FC Storage (Q-Logic QLE2692)

Postby milo1987 » 2020-10-22 06:56

Hi all,

i'm working now for 5 days on installing a Fujitsu Externus dx100 S5 - Storage on Proxmox.
I use a Q-Logic QLE2692 Card for a direct FibreChannel connection.

If i use a Windows VM and pass this card to this VM directly, i can see and interact with the Storage without any Problems.
So i think it's a driver or connection problem on Proxmox.

The driver is the original qla2xxx driver build into the default debian kernel.
(https://driverdownloads.qlogic.com/...u ... =1259&Os=5)

lspci
Code: Select all
b3:00.0 Fibre Channel: QLogic Corp. ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter (rev 01)
b3:00.1 Fibre Channel: QLogic Corp. ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter (rev 01)


lspci -s b3:00.0 -vvv

Code: Select all
b3:00.0 Fibre Channel: QLogic Corp. ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter (rev 01)
        Subsystem: QLogic Corp. QLE2692 Dual Port 16Gb Fibre Channel to PCIe Adapter
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 159
        NUMA node: 0
        Region 0: Memory at fba05000 (64-bit, prefetchable) [size=4K]
        Region 2: Memory at fba02000 (64-bit, prefetchable) [size=8K]
        Region 4: Memory at fb900000 (64-bit, prefetchable) [size=1M]
        Expansion ROM at fbe40000 [disabled] [size=256K]
        Capabilities: [44] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [4c] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <4us, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 50.000W
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 256 bytes, MaxReadReq 4096 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
                LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <512ns, L1 <2us
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
                         EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
        Capabilities: [88] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Input/output error
                Not readable
        Capabilities: [90] MSI-X: Enable+ Count=16 Masked-
                Vector table: BAR=2 offset=00000000
                PBA: BAR=2 offset=00001000
        Capabilities: [9c] Vendor Specific Information: Len=0c <?>
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [154 v1] Alternative Routing-ID Interpretation (ARI)
                ARICap: MFVC- ACS-, Next Function: 1
                ARICtl: MFVC- ACS-, Function Group: 0
        Capabilities: [1c0 v1] #19
        Capabilities: [1f4 v1] Vendor Specific Information: ID=0001 Rev=1 Len=014 <?>
        Kernel driver in use: qla2xxx
        Kernel modules: qla2xxx


qaucli
Now i can access the CommandLine Tool qaucli. Here i can see the storage as well. (See Pictures "device list")
The only message i'm thinking about is, that it says "no fabric attached device", what does this mean? If i try to set it with the tool, i can't set this fabric attached device?


Image

Image

Image

Image


You are my last hope, i have read the complete google and debianforum.
I think i've just something i overlooked and i need only one function to say mount "-this one"
i even tried to Install the Storage on an ubuntu VM. But here is the same trouble.

If you need more information, just write me a message...

Hope to find anyone to give the special hint

Thanks for your answers


This is the (bad) english Version, of my Question in the German debian board https://debianforum.de/forum/viewtopic.php?f=9&t=178998&p=1252499#p1252499
milo1987
 
Posts: 2
Joined: 2020-10-22 04:30

Re: Installation FC Storage (Q-Logic QLE2692)

Postby Head_on_a_Stick » 2020-10-22 16:06

milo1987 wrote:on Proxmox

Ask them about it, we only support Debian here.

Thread moved to the Offtopic section.
Black Lives Matter

Debian buster-backports ISO image: for new hardware support
User avatar
Head_on_a_Stick
 
Posts: 12756
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: Installation FC Storage (Q-Logic QLE2692)

Postby milo1987 » 2020-10-22 18:29

Head_on_a_Stick wrote:
milo1987 wrote:on Proxmox

Ask them about it, we only support Debian here.

Thread moved to the Offtopic section.


But Proxmox is running Debian....

For trying i have installed a 100% Debian machine aswell, but here is exacly the same problem, pls move the topic back again.
milo1987
 
Posts: 2
Joined: 2020-10-22 04:30


Return to Installation

Who is online

Users browsing this forum: No registered users and 4 guests

fashionable