Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230
LSB job is running, raising network interfaces
-
- Posts: 73
- Joined: 2014-11-14 05:30
LSB job is running, raising network interfaces
Hello, I was install debian 8 and now every time I start the system it shows this info:
LSB job is running, raising network interfaces
What is that I was newver see this before. How can I solve this prolbem.
Thank you for any advice.
LSB job is running, raising network interfaces
What is that I was newver see this before. How can I solve this prolbem.
Thank you for any advice.
- Head_on_a_Stick
- Posts: 14114
- Joined: 2014-06-01 17:46
- Location: London, England
- Has thanked: 81 times
- Been thanked: 132 times
Re: LSB job is running, raising network interfaces
Comment out (or remove) all the lines in /etc/network/interfaces after these ones:
Do not remove the above lines.
Code: Select all
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
deadbang
-
- Posts: 73
- Joined: 2014-11-14 05:30
Re: LSB job is running, raising network interfaces
I am using static configuration:
Code: Select all
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
auto eth0 eth1 br0
# The loopback network interface
#iface lo inet loopback
auto-hotplug eth0
iface eth0 inet manual
# Bridge for eth0
iface br0 inet static
bridge_ports eth0
address 172.100.200.30
broadcast 172.100.200.31
netmask 255.255.255.224
network 172.100.200.0
iface eth1 inet static
address 192.168.2.253
netmask 255.255.255.0
gateway 192.168.2.254
- Head_on_a_Stick
- Posts: 14114
- Joined: 2014-06-01 17:46
- Location: London, England
- Has thanked: 81 times
- Been thanked: 132 times
Re: LSB job is running, raising network interfaces
Ah, I see.
I think this is just an informational message from systemd -- is your boot up taking significantly longer?
What is the output of:
I think this is just an informational message from systemd -- is your boot up taking significantly longer?
What is the output of:
Code: Select all
systemctl --failed
deadbang
-
- Posts: 73
- Joined: 2014-11-14 05:30
Re: LSB job is running, raising network interfaces
It takes about 90 second.
Here is the output from systemctl --failed
You think this is not some error just info about starting network ?
Here is the output from systemctl --failed
Code: Select all
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
- Head_on_a_Stick
- Posts: 14114
- Joined: 2014-06-01 17:46
- Location: London, England
- Has thanked: 81 times
- Been thanked: 132 times
Re: LSB job is running, raising network interfaces
I don't think so -- my sid system will show that message if I set the network up using /etc/network/interfaces but it all works just fine and you have no failed units so I think the same is true for your system.corsairetc wrote:You think this is not some error just info about starting network ?
You could try booting with sysvinit and see if it is any quicker:
Code: Select all
# apt-get install sysvinit
# update-grub
deadbang
-
- Posts: 73
- Joined: 2014-11-14 05:30
Re: LSB job is running, raising network interfaces
Truth is the network in system work normally. I try that syvinit
-
- Posts: 73
- Joined: 2014-11-14 05:30
Re: LSB job is running, raising network interfaces
Hi, so I maybe found some problem. If I list ,,ip r" command here missing default route for eth0
Network 192.168.2.0 is for eth1 others are for openvpn but route for eth0 with ip 172.100.200.0/27 is missing.
Is any way how can I fix it.
Code: Select all
default via 192.168.2.254 dev eth1
192.168.2.0/24 dev eth1 proto kernel scope link src 192.168.2.253
192.168.10.0/24 via 192.168.44.2 dev tun1
192.168.44.0/24 via 192.168.44.2 dev tun1
192.168.44.2 dev tun1 proto kernel scope link src 192.168.44.1
Is any way how can I fix it.
-
- Posts: 73
- Joined: 2014-11-14 05:30