Ralink wireless driver problem

New to Debian (Or Linux in general)? Ask your questions here!

Ralink wireless driver problem

Postby nabeel » 2017-06-23 02:14

Code: Select all

########## wireless info START ##########

Report from: 23 Jun 2017 08:22 IST +0530

Booted last: 23 Jun 2017 00:00 IST +0530

Script from: 25 Mar 2017 07:04 UTC +0000

##### release ###########################

Distributor ID:   Debian
Description:   Debian GNU/Linux 9.0 (stretch)
Release:   9.0
Codename:   stretch

##### kernel ############################

Linux 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u1 (2017-06-18) x86_64 unknown unknown GNU/Linux

Parameters: ro, quiet

##### desktop ###########################

sed: can't read /root/.dmrc: No such file or directory

Could not be determined.

##### lspci #############################

07:00.0 Network controller [0280]: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe [1814:3290]
   Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter [103c:18ec]
   Kernel driver in use: rt2800pci

08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)
   Subsystem: Hewlett-Packard Company RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [103c:1970]
   Kernel driver in use: r8169

##### lsusb #############################

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 0bda:571c Realtek Semiconductor Corp.
Bus 003 Device 002: ID 2717:ff80 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

##### PCMCIA card info ##################

##### rfkill ############################

0: phy0: Wireless LAN
   Soft blocked: no
   Hard blocked: no

##### lsmod #############################

rt2800pci              16384  0
rt2800mmio             20480  1 rt2800pci
rt2800lib              94208  2 rt2800mmio,rt2800pci
rt2x00pci              16384  1 rt2800pci
rt2x00mmio             16384  2 rt2800mmio,rt2800pci
rt2x00lib              53248  5 rt2800lib,rt2x00pci,rt2800mmio,rt2x00mmio,rt2800pci
eeprom_93cx6           16384  1 rt2800pci
mac80211              671744  3 rt2800lib,rt2x00pci,rt2x00lib
cfg80211              589824  2 rt2x00lib,mac80211
hp_wmi                 16384  0
crc_ccitt              16384  1 rt2800lib
sparse_keymap          16384  1 hp_wmi
rfkill                 24576  3 hp_wmi,cfg80211
wmi                    16384  1 hp_wmi
usbcore               249856  10 rndis_host,usbnet,rt2x00lib,uvcvideo,usbhid,ehci_hcd,cdc_ether,xhci_pci,xhci_hcd,ehci_pci

##### interfaces ########################

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

auto wlo1
iface wlo1 inet dhcp

##### ifconfig ##########################

eno1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether <MAC address>  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp0s20u2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.42.107  netmask 255.255.255.0  broadcast 192.168.42.255
        inet6 fe80::c321:5a58:693d:a2fd  prefixlen 64  scopeid 0x20<link>
        ether <MAC address>  txqueuelen 1000  (Ethernet)
        RX packets 16286  bytes 14018542 (13.3 MiB)
        RX errors 2  dropped 0  overruns 0  frame 2
        TX packets 14285  bytes 2269327 (2.1 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 170  bytes 13434 (13.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 170  bytes 13434 (13.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlo1: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether <MAC address>  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

##### iwconfig ##########################

enp0s20u2  no wireless extensions.

lo        no wireless extensions.

eno1      no wireless extensions.

wlo1      IEEE 802.11  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
         

##### route #############################

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.42.129  0.0.0.0         UG    100    0        0 enp0s20u2
169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 enp0s20u2
192.168.42.0    0.0.0.0         255.255.255.0   U     100    0        0 enp0s20u2

##### resolv.conf #######################

nameserver 192.168.42.129

##### network managers ##################

Installed:

   NetworkManager
   Wicd

Running:

root       521     1  0 08:04 ?        00:00:00 /usr/sbin/NetworkManager --no-daemon

##### NetworkManager info ###############

GENERAL.DEVICE:                         enp0s20u2
GENERAL.TYPE:                           ethernet
GENERAL.NM-TYPE:                        NMDeviceEthernet
GENERAL.VENDOR:                         Android
GENERAL.PRODUCT:                        Android
GENERAL.DRIVER:                         rndis_host
GENERAL.DRIVER-VERSION:                 22-Aug-2005
GENERAL.FIRMWARE-VERSION:               RNDIS device
GENERAL.HWADDR:                         <MAC address>
GENERAL.MTU:                            1500
GENERAL.STATE:                          100 (connected)
GENERAL.REASON:                         0 (No reason given)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/net/enp0s20u2
GENERAL.IP-IFACE:                       enp0s20u2
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                   --
GENERAL.CONNECTION:                     Wired connection 2
GENERAL.CON-UUID:                       0950effb-c8de-3beb-98c6-ae311ce1d9ce
GENERAL.CON-PATH:                       /org/freedesktop/NetworkManager/ActiveConnection/1
GENERAL.METERED:                        yes (guessed)
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                     unknown
CAPABILITIES.IS-SOFTWARE:               no
WIRED-PROPERTIES.CARRIER:               on
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{3}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]:   0950effb-c8de-3beb-98c6-ae311ce1d9ce | Wired connection 2
IP4.ADDRESS[1]:                         192.168.42.107/24
IP4.GATEWAY:                            192.168.42.129
IP4.ROUTE[1]:                           dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]:                             192.168.42.129
DHCP4.OPTION[1]:                        requested_subnet_mask = 1
DHCP4.OPTION[2]:                        requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[3]:                        subnet_mask = 255.255.255.0
DHCP4.OPTION[4]:                        domain_name_servers = 192.168.42.129
DHCP4.OPTION[5]:                        ip_address = 192.168.42.107
DHCP4.OPTION[6]:                        requested_static_routes = 1
DHCP4.OPTION[7]:                        dhcp_server_identifier = 192.168.42.129
DHCP4.OPTION[8]:                        requested_time_offset = 1
DHCP4.OPTION[9]:                        broadcast_address = 192.168.42.255
DHCP4.OPTION[10]:                       requested_interface_mtu = 1
DHCP4.OPTION[11]:                       dhcp_rebinding_time = 3150
DHCP4.OPTION[12]:                       requested_domain_name_servers = 1
DHCP4.OPTION[13]:                       dhcp_message_type = 5
DHCP4.OPTION[14]:                       requested_broadcast_address = 1
DHCP4.OPTION[15]:                       routers = 192.168.42.129
DHCP4.OPTION[16]:                       dhcp_renewal_time = 1800
DHCP4.OPTION[17]:                       requested_domain_name = 1
DHCP4.OPTION[18]:                       requested_routers = 1
DHCP4.OPTION[19]:                       expiry = 1498188900
DHCP4.OPTION[20]:                       requested_wpad = 1
DHCP4.OPTION[21]:                       host_name = debian
DHCP4.OPTION[22]:                       requested_netbios_scope = 1
DHCP4.OPTION[23]:                       requested_ms_classless_static_routes = 1
DHCP4.OPTION[24]:                       requested_netbios_name_servers = 1
DHCP4.OPTION[25]:                       network_number = 192.168.42.0
DHCP4.OPTION[26]:                       requested_domain_search = 1
DHCP4.OPTION[27]:                       vendor_encapsulated_options = ANDROID_METERED
DHCP4.OPTION[28]:                       next_server = 192.168.42.129
DHCP4.OPTION[29]:                       requested_host_name = 1
DHCP4.OPTION[30]:                       dhcp_lease_time = 3600
DHCP4.OPTION[31]:                       requested_ntp_servers = 1
IP6.ADDRESS[1]:                         fe80::c321:5a58:693d:a2fd/64
IP6.GATEWAY:                            --

GENERAL.DEVICE:                         eno1
GENERAL.TYPE:                           ethernet
GENERAL.NM-TYPE:                        NMDeviceEthernet
GENERAL.VENDOR:                         Realtek Semiconductor Co., Ltd.
GENERAL.PRODUCT:                        RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
GENERAL.DRIVER:                         r8169
GENERAL.DRIVER-VERSION:                 2.3LK-NAPI
GENERAL.FIRMWARE-VERSION:               --
GENERAL.HWADDR:                         <MAC address>
GENERAL.MTU:                            1500
GENERAL.STATE:                          20 (unavailable)
GENERAL.REASON:                         2 (Device is now managed)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1c.1/0000:08:00.0/net/eno1
GENERAL.IP-IFACE:                       --
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                   --
GENERAL.CONNECTION:                     --
GENERAL.CON-UUID:                       --
GENERAL.CON-PATH:                       --
GENERAL.METERED:                        unknown
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                     unknown
CAPABILITIES.IS-SOFTWARE:               no
WIRED-PROPERTIES.CARRIER:               off
CONNECTIONS.AVAILABLE-CONNECTION-PATHS:

GENERAL.DEVICE:                         wlo1
GENERAL.TYPE:                           wifi
GENERAL.NM-TYPE:                        NMDeviceWifi
GENERAL.VENDOR:                         Ralink corp.
GENERAL.PRODUCT:                        RT3290 Wireless 802.11n 1T/1R PCIe (Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter)
GENERAL.DRIVER:                         rt2800pci
GENERAL.DRIVER-VERSION:                 4.9.0-3-amd64
GENERAL.FIRMWARE-VERSION:               N/A
GENERAL.HWADDR:                         <MAC address>
GENERAL.MTU:                            1500
GENERAL.STATE:                          10 (unmanaged)
GENERAL.REASON:                         0 (No reason given)
GENERAL.UDI:                            /virtual/device/placeholder/2
GENERAL.IP-IFACE:                       wlo1
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                     no
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                   --
GENERAL.CONNECTION:                     --
GENERAL.CON-UUID:                       --
GENERAL.CON-PATH:                       --
GENERAL.METERED:                        unknown
CAPABILITIES.CARRIER-DETECT:            no
CAPABILITIES.SPEED:                     unknown
CAPABILITIES.IS-SOFTWARE:               no
WIFI-PROPERTIES.WEP:                    yes
WIFI-PROPERTIES.WPA:                    yes
WIFI-PROPERTIES.WPA2:                   yes
WIFI-PROPERTIES.TKIP:                   yes
WIFI-PROPERTIES.CCMP:                   yes
WIFI-PROPERTIES.AP:                     yes
WIFI-PROPERTIES.ADHOC:                  yes
WIFI-PROPERTIES.2GHZ:                   yes
WIFI-PROPERTIES.5GHZ:                   no
CONNECTIONS.AVAILABLE-CONNECTION-PATHS:
IP4.GATEWAY:                            --
IP6.GATEWAY:                            --

SSID  BSSID  MODE  CHAN  FREQ  RATE  SIGNAL  BARS  SECURITY  ACTIVE  *

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true

##### NetworkManager.conf ###############

[main]
plugins=ifupdown,keyfile

[ifupdown]
managed=false

##### NetworkManager profiles ###########

[[/etc/NetworkManager/system-connections/JioFi]] (600 root)
[connection] id=JioFi | type=wifi | permissions=
[wifi] bssid=<MAC address> | mac-address=BC:85:56:53:8A:43 | mac-address-blacklist= | ssid=JioFi
[ipv4] method=auto
[ipv6] method=auto

##### iw reg get ########################

Region: Asia/Kolkata (based on set time zone)

global
country 00: DFS-UNSET
   (2402 - 2472 @ 40), (N/A, 20), (N/A)
   (2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, NO-IR
   (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
   (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, NO-IR
   (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, NO-IR
   (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
   (5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
   (57240 - 63720 @ 2160), (N/A, 0), (N/A)

##### iwlist channels ###################

enp0s20u2  no frequency information.

lo        no frequency information.

eno1      no frequency information.

wlo1      14 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
          Channel 14 : 2.484 GHz

##### iwlist scan #######################

enp0s20u2  Interface doesn't support scanning.

wlo1      Interface doesn't support scanning : Network is down

lo        Interface doesn't support scanning.

eno1      Interface doesn't support scanning.

##### module infos ######################

[rt2800pci]
filename:       /lib/modules/4.9.0-3-amd64/kernel/drivers/net/wireless/ralink/rt2x00/rt2800pci.ko
license:        GPL
firmware:       rt2860.bin
description:    Ralink RT2800 PCI & PCMCIA Wireless LAN driver.
version:        2.3.0
author:         http://rt2x00.serialmonkey.com
srcversion:     4D2CAAE95D28B3DF4F72A52
depends:        rt2x00lib,rt2800lib,rt2800mmio,rt2x00mmio,rt2x00pci,eeprom_93cx6
intree:         Y
vermagic:       4.9.0-3-amd64 SMP mod_unload modversions
parm:           nohwcrypt:Disable hardware encryption. (bool)

[rt2800mmio]
filename:       /lib/modules/4.9.0-3-amd64/kernel/drivers/net/wireless/ralink/rt2x00/rt2800mmio.ko
license:        GPL
description:    rt2800 MMIO library
version:        2.3.0
author:         http://rt2x00.serialmonkey.com
srcversion:     DBE617B0243C0FEB62786D4
depends:        rt2800lib,rt2x00lib,rt2x00mmio
intree:         Y
vermagic:       4.9.0-3-amd64 SMP mod_unload modversions

[rt2800lib]
filename:       /lib/modules/4.9.0-3-amd64/kernel/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko
license:        GPL
description:    Ralink RT2800 library
version:        2.3.0
author:         http://rt2x00.serialmonkey.com, Bartlomiej Zolnierkiewicz
srcversion:     7092408A4EF1A70FC0C7538
depends:        rt2x00lib,mac80211,crc-ccitt
intree:         Y
vermagic:       4.9.0-3-amd64 SMP mod_unload modversions

[rt2x00pci]
filename:       /lib/modules/4.9.0-3-amd64/kernel/drivers/net/wireless/ralink/rt2x00/rt2x00pci.ko
license:        GPL
description:    rt2x00 pci library
version:        2.3.0
author:         http://rt2x00.serialmonkey.com
srcversion:     D84965563CC7530CFFD2269
depends:        rt2x00lib,mac80211
intree:         Y
vermagic:       4.9.0-3-amd64 SMP mod_unload modversions

[rt2x00mmio]
filename:       /lib/modules/4.9.0-3-amd64/kernel/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko
license:        GPL
description:    rt2x00 mmio library
version:        2.3.0
author:         http://rt2x00.serialmonkey.com
srcversion:     02CA9DA77FC2C7FCCC58176
depends:        rt2x00lib
intree:         Y
vermagic:       4.9.0-3-amd64 SMP mod_unload modversions

[rt2x00lib]
filename:       /lib/modules/4.9.0-3-amd64/kernel/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko
license:        GPL
description:    rt2x00 library
version:        2.3.0
author:         http://rt2x00.serialmonkey.com
srcversion:     6466444C3AD5B023573B0FF
depends:        mac80211,cfg80211,usbcore
intree:         Y
vermagic:       4.9.0-3-amd64 SMP mod_unload modversions

[mac80211]
filename:       /lib/modules/4.9.0-3-amd64/kernel/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
depends:        cfg80211
intree:         Y
vermagic:       4.9.0-3-amd64 SMP mod_unload modversions
parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[cfg80211]
filename:       /lib/modules/4.9.0-3-amd64/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:         Johannes Berg
depends:        rfkill
intree:         Y
vermagic:       4.9.0-3-amd64 SMP mod_unload modversions
parm:           bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

[rt2800pci]
nohwcrypt: N

[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
probe_wait_ms: 500

[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

##### modprobe options ##################

##### rc.local ##########################

grep: /etc/rc.local: No such file or directory

##### pm-utils ##########################

find: '/etc/pm/*.d': No such file or directory

##### udev rules ########################

##### dmesg #############################

[   10.371880] [drm:radeon_pci_probe [radeon]] *ERROR* radeon kernel modesetting for R600 or later requires firmware-amd-graphics.
[   10.540228] rt2800pci 0000:07:00.0 wlo1: renamed from wlan0
[   17.776586] r8169 0000:08:00.0: firmware: failed to load rtl_nic/rtl8106e-1.fw (-2)
[   17.776657] r8169 0000:08:00.0: Direct firmware load for rtl_nic/rtl8106e-1.fw failed with error -2
[   17.776661] r8169 0000:08:00.0 eno1: unable to load firmware patch rtl_nic/rtl8106e-1.fw (-2)
[   18.349440] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[   18.524760] rt2800pci 0000:07:00.0: firmware: direct-loading firmware rt3290.bin
[   18.524772] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[   20.551118] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[   22.551042] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   25.442725] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[   27.442647] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   35.085944] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[   37.093869] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   40.026262] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[   41.982274] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   44.938187] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[   46.915354] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   49.870549] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[   51.858704] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   86.271525] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[   88.268719] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[  249.714104] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[  251.713488] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[  367.803104] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[  369.803393] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[  454.757223] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[  456.757031] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[  468.059949] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[  470.059762] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[  598.864278] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[  600.864125] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[  659.743190] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[  661.743031] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[  864.715372] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[  866.715205] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[  927.641536] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[  929.641404] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 1069.700902] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068] (repeated 2 times)
[ 1071.700761] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)

########## wireless info END ############


➜ sudo ip link set wlo1 up
RTNETLINK answers: Input/output error

➜  sudo ifconfig wlo1 up
SIOCSIFFLAGS: Input/output error



At times it gets connect, but most of the time :(

I tried https://askubuntu.com/questions/253632/how-do-i-get-a-ralink-rt3290-wireless-card-working solution but it didn't help.
Code: Select all
cc1: some warnings being treated as errors
/usr/src/linux-headers-4.9.0-3-common/scripts/Makefile.build:298: recipe for target '/home/nabeel/Downloads/RT3290/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../sta/sta_cfg.o' failed
make[4]: *** [/home/nabeel/Downloads/RT3290/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux/../../sta/sta_cfg.o] Error 1
/usr/src/linux-headers-4.9.0-3-common/Makefile:1507: recipe for target '_module_/home/nabeel/Downloads/RT3290/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux' failed
make[3]: *** [_module_/home/nabeel/Downloads/RT3290/DPO_RT3290_LinuxSTA_V2600_20120508/os/linux] Error 2
Makefile:150: recipe for target 'sub-make' failed
make[2]: *** [sub-make] Error 2
Makefile:8: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.9.0-3-amd64'
Makefile:380: recipe for target 'LINUX' failed
make: *** [LINUX] Error 2

nabeel
 
Posts: 1
Joined: 2017-06-23 01:56

Re: Ralink wireless driver problem

Postby msnjuegos » 2017-09-09 22:23

Hi @naebee, did you solve your problem? I have a similar problem with the same driver (rt2800pci) in debian stretch. A few weeks ago I hadn't have issues with wifi :/.
msnjuegos
 
Posts: 11
Joined: 2017-09-07 23:05

Re: Ralink wireless driver problem

Postby idealvin » 2017-10-19 09:11

I met the same problem on debian 9 with ralink rt3290 wireless cards.
Finally solved it from here.
This is how I solve it:
Code: Select all
cd DPO_RT3290_LinuxSTA_V2600_20120508

vi os/linux/config.mk
line 26 ==>  HAS_WPA_SUPPLICANT=y
line 31 ==>  HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y
line 176 =>  add -Wno-error=date-time to WFLAGS

vi os/linux/rt_linux.c
line 1136, 1137 ==>
pOSFSInfo->fsuid = current_fsuid().val;
pOSFSInfo->fsgid = current_fsgid().val;

vi os/linux/pci_main_dev.c
and adding the following after the "#include " near the top

#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,8,0)
#define __devexit
#define __devinit
#define __devinitdata
#endif

then change the portion of the file which says

#if LINUX_VERSION_CODE >= 0x20412
remove:     __devexit_p(rt2860_remove_one),
#else
remove:     __devexit(rt2860_remove_one),
#endif

to

#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,8,0)
remove:     rt2860_remove_one,
#else
#if LINUX_VERSION_CODE >= 0x20412
remove:     __devexit_p(rt2860_remove_one),
#else
remove:     __devexit(rt2860_remove_one),
#endif
#endif


Good luck :)
idealvin
 
Posts: 1
Joined: 2017-10-19 08:49


Return to Beginners Questions

Who is online

Users browsing this forum: No registered users and 8 guests

fashionable