Hi,
I searched for an information how to create a VLANs with iproute2 (ip link add) that will survive a reboot, without custom scripts or adding a post-up command to /etc/network/interfaces.
With the vlan package installed and standard configuration for a vlan in /etc/network/interfaces, vlan goes up, but without the vlan package installed, it won't start.
If I manualy create a vlan and restart a network with "service networking restart" everthing starts as expected.
Main reason for the post are claims that the iproute2 (ip tool) is default way to create a vlans, because the vlan package is obsolete.
I couldn't found an instruction with a setup that only changing /etc/network/interfaces is enough for creating a vlan.
So i need help.
#configuration and commands
iproute2 command manual vlan
ip link add link eth0 name eth0.100 type vlan id 100
configuration example
#/etc/network/interfaces
source /etc/network/interfaces.d/*
allow-hotplug eth0 eth1
auto lo bond0
iface lo inet loopback
iface bond0 inet manual
slaves eth0 eth1
bond_mode 4
bond_miimon 100
bond_downdelay 200
bond_updelay 200
auto vlan10
iface vlan10 inet static
address 192.168.10.10
netmask 255.255.255.0
network 192.168.10.0
vlan-raw-device bond0
network 192.168.10.0
broadcast 192.168.10.255
gateway 192.168.10.1
dns-nameservers 8.8.8.8
Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230