(Solved) Ethernet card driver for HP Proliant ML370 G6

New to Debian (Or Linux in general)? Ask your questions here!

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby sarksloane » 2017-12-12 18:35

p.H wrote:The driver appears to be module netxen_nic. According to modinfo, it may need firmware phanfw.bin :
Code: Select all
$ /sbin/modinfo netxen_nic
filename:       /lib/modules/3.2.0-4-686-pae/kernel/drivers/net/ethernet/qlogic/netxen/netxen_nic.ko
firmware:       phanfw.bin
version:        4.0.77
license:        GPL
description:    QLogic/NetXen (1/10) GbE Intelligent Ethernet Driver
srcversion:     C868D16D949D7E304D6B0A6
alias:          pci:v00004040d00000100sv*sd*bc02sc00i00*
(...)

This firmware is provided by the non-free package firmware-netxen. You can download the package from https://packages.debian.org/stretch/all ... n/download (assuming you install Debian Stretch).
If you want to enable networking at installation, you need to copy it on a FAT-formated USB drive so that the installer can find and load it when needed.
If you want to enable networking on your installed system, just install the package with dpkg :
Code: Select all
dpkg -i /path/to/firmware-netxen_20161130-3_all.deb


I inserted the usb and typed the below command but it says cannot access archive
Code: Select all
dpkg -i /path/to/firmware-netxen_20161130-3_all.deb
sarksloane
 
Posts: 75
Joined: 2017-01-17 04:21

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby sarksloane » 2017-12-17 18:28

Done..I installed the missing firmware :) ... please check the result https://imgur.com/a/sn5iP

Is this means I did it and installed it correctly? if yes why is it that when i check the network using this command
Code: Select all
ip route get 1.2.3.4
it says
RTNETLINK answers: Network is unreachable


I connected already the LAN cable but still no network.
sarksloane
 
Posts: 75
Joined: 2017-01-17 04:21

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby Segfault » 2017-12-17 18:49

Does dmesg show now the firmware is loaded? (Can't see pictures.)
Segfault
 
Posts: 691
Joined: 2005-09-24 12:24

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby sarksloane » 2017-12-18 00:16

Segfault wrote:Does dmesg show now the firmware is loaded? (Can't see pictures.)


Thank you. Please check dmesg https://imgur.com/a/yNWmH
sarksloane
 
Posts: 75
Joined: 2017-01-17 04:21

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby Segfault » 2017-12-18 00:38

I can't see pictures. Perhaps someone else can tell what's on this picture. Lets wait ... FYI there are ways to get plain text out of a computer even when the network is down and the GUI is not installed.
Segfault
 
Posts: 691
Joined: 2005-09-24 12:24

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby stevepusser » 2017-12-18 02:10

Segfault wrote:I can't see pictures. Perhaps someone else can tell what's on this picture. Lets wait ... FYI there are ways to get plain text out of a computer even when the network is down and the GUI is not installed.


That sure doesn't look like any dmesg output that I've ever seen.
The MX Linux repositories: Backports galore! If we don't have something, just ask and we'll try--we like challenges. New packages: mvp 0.29.0, Pale Moon 28.0.0, wine-staging 3.13, qBittorrent 4.1.2, Linux kernel 4.17.14, virtualbox 5.2.18
User avatar
stevepusser
 
Posts: 9803
Joined: 2009-10-06 05:53

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby sarksloane » 2017-12-18 02:58

Segfault wrote:I can't see pictures. Perhaps someone else can tell what's on this picture. Lets wait ... FYI there are ways to get plain text out of a computer even when the network is down and the GUI is not installed.


I run the command
Code: Select all
dmesg | grep -i ethernet
but the output is below

Code: Select all
dmesg: read kernel buffer failed: Operation not permitted
sarksloane
 
Posts: 75
Joined: 2017-01-17 04:21

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby 4D696B65 » 2017-12-18 03:07

You need to be root to run dmesg
User avatar
4D696B65
 
Posts: 2190
Joined: 2009-06-28 06:09

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby sarksloane » 2017-12-18 03:21

4D696B65 wrote:You need to be root to run dmesg


thank you. I run again with root but no output, please check the image https://imgur.com/a/Q71aj
sarksloane
 
Posts: 75
Joined: 2017-01-17 04:21

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby sarksloane » 2017-12-18 18:30

Segfault wrote:I can't see pictures. Perhaps someone else can tell what's on this picture. Lets wait ... FYI there are ways to get plain text out of a computer even when the network is down and the GUI is not installed.


I tried the command
Code: Select all
dmesg | more
and the output is like this https://imgur.com/a/x8ye4
sarksloane
 
Posts: 75
Joined: 2017-01-17 04:21

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby GarryRicketson » 2017-12-18 21:13

Using the 'more' command only shows the first part of the out put any way,

A screen shot is not the proper way to capture the 'dmesg' output.
Code: Select all
dmesg > dmesg.txt

Will put the entire output into a file named "dmesg.txt", it will be in the same
directory , where you run it.
You can also direct it to another directory, or a usb device.
Code: Select all
dmesg > /usb/home/garry/demsg.txt

For example, I mount my usb stick in a directory named usb , many others mount to /mnt or /media,... you would be the one to know the correct path.
Anyway, after you put it into a text file, since the dmesg is usually very long,
you then upload the text file to: http://paste.debian.net/
or something similar, and post a link to it, similar to the way a image is done.
Or just paste the relevant part into code boxes like this:
Code: Select all
$ dmesg>example-dmesg.txt
$
 

=============
example-dmesg.txt
Code: Select all
$ nano example-dmesg.txt

OpenBSD 6.2 (GENERIC.MP) #1: Fri Dec  1 10:34:32 CET 2017
    root@syspatch-62-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.$
real mem = 3164598272 (3017MB)
avail mem = 3061735424 (2919MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0450 (82 entries)
bios0: vendor Dell Inc. version "A06" date 11/03/2010
bios0: Dell Inc. OptiPlex 780
----- snip-- no need for it all, I am not using Debian at the moment, but that #does not matter, it works the same on Debian or any linux -----
# also, I have no DE, only terminal here, so no DE is not a excuse.

Note, on OpenBsd, root is not required, but on Debian it is, so yes you do need
to be root to run the dmesg command. (su or use sudo)
User avatar
GarryRicketson
 
Posts: 4964
Joined: 2015-01-20 22:16
Location: Durango, Mexico

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby sarksloane » 2017-12-20 19:27

Thank you Mr.Garry Ricketson for the guide.

Please check the below.

Code: Select all
[    0.000000] Linux version 4.9.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.51-1 (2017-09-28)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=/dev/sda1 ro quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f62efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f62f000-0x000000007f63bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f63c000-0x000000007f63cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f63d000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000dbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: HP ProLiant ML370 G6, BIOS P63 08/16/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f63d max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff9b94800f4f80]
[    0.000000] Base memory trampoline at [ffff9b9480099000] 99000 size 24576
[    0.000000] BRK [0x46f2f000, 0x46f2ffff] PGTABLE
[    0.000000] BRK [0x46f30000, 0x46f30fff] PGTABLE
[    0.000000] BRK [0x46f31000, 0x46f31fff] PGTABLE
[    0.000000] BRK [0x46f32000, 0x46f32fff] PGTABLE
[    0.000000] BRK [0x46f33000, 0x46f33fff] PGTABLE
[    0.000000] BRK [0x46f34000, 0x46f34fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35aeb000-0x36d6cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP    )
[    0.000000] ACPI: XSDT 0x000000007F630100 0000BC (v01 HP     ProLiant 00000002 \xffffffd2?   0000162E)
[    0.000000] ACPI: FACP 0x000000007F630200 0000F4 (v03 HP     ProLiant 00000002 \xffffffd2?   0000162E)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20160831/tbfadt-708)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20160831/tbfadt-708)
[    0.000000] ACPI: DSDT 0x000000007F630300 0027C6 (v01 HP     DSDT     00000001 INTL 20030228)
[    0.000000] ACPI: FACS 0x000000007F62F100 000040
[    0.000000] ACPI: FACS 0x000000007F62F100 000040
[    0.000000] ACPI: SPCR 0x000000007F62F140 000050 (v01 HP     SPCRRBSU 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: MCFG 0x000000007F62F1C0 00003C (v01 HP     ProLiant 00000001      00000000)
[    0.000000] ACPI: HPET 0x000000007F62F200 000038 (v01 HP     ProLiant 00000002 \xffffffd2?   0000162E)
[    0.000000] ACPI: FFFF 0x000000007F62F240 000064 (v02 HP     ProLiant 00000002 \xffffffd2?   0000162E)
[    0.000000] ACPI: SPMI 0x000000007F62F2C0 000040 (v05 HP     ProLiant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: FFFF 0x000000007F62F300 0001D0 (v01 HP     ProLiant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: APIC 0x000000007F62F500 00016A (v01 HP     ProLiant 00000002      00000000)
[    0.000000] ACPI: SRAT 0x000000007F62F680 000570 (v01 HP     Proliant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: FFFF 0x000000007F62FC00 000176 (v01 HP     ProLiant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: FFFF 0x000000007F62FD80 000030 (v01 HP     ProLiant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: FFFF 0x000000007F62FDC0 0000BC (v01 HP     ProLiant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: DMAR 0x000000007F62FE80 000214 (v01 HP     ProLiant 00000001 \xffffffd2?   0000162E)
[    0.000000] ACPI: SSDT 0x000000007F632B00 000125 (v03 HP     CRSPCI0  00000002 HP   00000001)
[    0.000000] ACPI: SSDT 0x000000007F632C40 000076 (v03 HP     CRSPCI1  00000002 HP   00000001)
[    0.000000] ACPI: SSDT 0x000000007F632CC0 0009C9 (v03 HP     riser1a  00000002 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007F6336C0 0003BB (v01 HP     pcc      00000001 INTL 20090625)
[    0.000000] ACPI: SSDT 0x000000007F633A80 000377 (v01 HP     pmab     00000001 INTL 20090625)
[    0.000000] ACPI: SSDT 0x000000007F633E00 0015C4 (v01 INTEL  PPM RCM  00000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7f62a000-0x7f62efff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f63cfff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f62efff]
[    0.000000]   node   0: [mem 0x000000007f63c000-0x000000007f63cfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f63cfff]
[    0.000000] On node 0 totalpages: 521678
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8089 pages used for memmap
[    0.000000]   DMA32 zone: 517680 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x908
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
[    0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec82000, GSI 48-71
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 32 CPUs, 24 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f62f000-0x7f63bfff]
[    0.000000] e820: [mem 0x80000000-0xd7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff9b94fc600000 s103512 r8192 d31656 u262144
[    0.000000] pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513504
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=/dev/sda1 ro quiet
[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 126976 bytes
[    0.000000] log_buf_len min size: 131072 bytes
[    0.000000] log_buf_len: 262144 bytes
[    0.000000] early log buf free: 121896(92%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2014496K/2086712K available (6196K kernel code, 1137K rwdata, 2856K rodata, 1396K init, 688K bss, 72216K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 64.
[    0.000000]    RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=32.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32
[    0.000000] NR_IRQS:33024 nr_irqs:1496 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2532.471 MHz processor
[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5064.94 BogoMIPS (lpj=10129884)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000072] ACPI: Core revision 20160831
[    0.003923] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.004042] Security Framework initialized
[    0.004044] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004049] AppArmor: AppArmor disabled by boot time parameter
[    0.004185] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004846] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.005156] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.005159] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.005481] CPU: Physical Processor ID: 0
[    0.005482] CPU: Processor Core ID: 0
[    0.005486] mce: CPU supports 9 MCE banks
[    0.005492] CPU0: Thermal monitoring enabled (TM1)
[    0.005501] process: using mwait in idle threads
[    0.005504] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.005505] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.005775] Freeing SMP alternatives memory: 24K
[    0.007284] ftrace: allocating 25191 entries in 99 pages
[    0.018434] smpboot: Max logical packages: 8
[    0.018438] DMAR-IR: This system BIOS has enabled interrupt remapping
               on a chipset that contains an erratum making that
               feature unstable.  To maintain system stability
               interrupt remapping is being disabled.  Please
               contact your BIOS vendor for an update
[    0.018440] Switched APIC routing to physical flat.
[    0.019191] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.166314] smpboot: CPU0: Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz (family: 0x6, model: 0x1a, stepping: 0x5)
[    0.166316] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Broken BIOS detected, complain to your hardware vendor.
[    0.166332] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
[    0.166385] Intel PMU driver.
[    0.166385] core: CPU erratum AAJ80 worked around
[    0.166386] core: CPUID marked event: 'bus cycles' unavailable
[    0.166391] ... version:                3
[    0.166392] ... bit width:              48
[    0.166392] ... generic registers:      4
[    0.166393] ... value mask:             0000ffffffffffff
[    0.166393] ... max period:             000000007fffffff
[    0.166394] ... fixed-purpose events:   3
[    0.166394] ... event mask:             000000070000000f
[    0.167627] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.167751] .... node  #0, CPUs:    #4  #8 #12 #16 #20 #24 #28
[    0.728376] x86: Booted up 1 node, 8 CPUs
[    0.728379] smpboot: Total of 8 processors activated (40519.85 BogoMIPS)
[    0.734340] devtmpfs: initialized
[    0.734403] x86/mm: Memory block size: 128MB
[    0.736389] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.736420] futex hash table entries: 8192 (order: 7, 524288 bytes)
[    0.736546] pinctrl core: initialized pinctrl subsystem
[    0.736671] NET: Registered protocol family 16
[    0.750318] cpuidle: using governor ladder
[    0.766317] cpuidle: using governor menu
[    0.766357] ACPI: bus type PCI registered
[    0.766359] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.766450] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xd8000000-0xdbffffff] (base 0xd8000000)
[    0.766451] PCI: MMCONFIG at [mem 0xd8000000-0xdbffffff] reserved in E820
[    0.766456] PCI: Using configuration type 1 for base access
[    0.782476] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.782764] ACPI: Added _OSI(Module Device)
[    0.782765] ACPI: Added _OSI(Processor Device)
[    0.782766] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.782766] ACPI: Added _OSI(Processor Aggregator Device)
[    0.783981] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20160831/dsopcode-236)
[    0.784109] ACPI Error: Method parse/execution failed [\_SB._OSC] (Node ffff9b94fc0a6d48), AE_AML_BUFFER_LIMIT (20160831/psparse-543)
[    0.785496] ACPI: Interpreter enabled
[    0.785508] ACPI: (supports S0 S4 S5)
[    0.785508] ACPI: Using IOAPIC for interrupt routing
[    0.785527] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.790958] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-16])
[    0.790962] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.790966] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.790981] acpi PNP0A03:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff window]; [mem 0xfed00000-0xfed44fff window] ignored
[    0.791097] PCI host bridge to bus 0000:00
[    0.791099] pci_bus 0000:00: root bus resource [mem 0xdf000000-0xfaffffff window]
[    0.791100] pci_bus 0000:00: root bus resource [io  0x1000-0x4fff window]
[    0.791101] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.791103] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.791104] pci_bus 0000:00: root bus resource [io  0x0d00-0x0fff window]
[    0.791105] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff window]
[    0.791106] pci_bus 0000:00: root bus resource [io  0x03b0-0x03bb window]
[    0.791107] pci_bus 0000:00: root bus resource [io  0x03c0-0x03df window]
[    0.791108] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.791109] pci_bus 0000:00: root bus resource [bus 00-16]
[    0.791119] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
[    0.791172] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.791242] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[    0.791292] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.791362] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[    0.791410] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.791479] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[    0.791529] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.791597] pci 0000:00:04.0: [8086:340b] type 01 class 0x060400
[    0.791645] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.791712] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
[    0.791760] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.791829] pci 0000:00:06.0: [8086:340d] type 01 class 0x060400
[    0.791877] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.791944] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[    0.791993] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.792062] pci 0000:00:08.0: [8086:340f] type 01 class 0x060400
[    0.792110] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[    0.792180] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[    0.792228] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.792296] pci 0000:00:0a.0: [8086:3411] type 01 class 0x060400
[    0.792344] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.792421] pci 0000:00:0d.0: [8086:343a] type 00 class 0x060000
[    0.792517] pci 0000:00:0d.1: [8086:343b] type 00 class 0x060000
[    0.792611] pci 0000:00:0d.2: [8086:343c] type 00 class 0x060000
[    0.792701] pci 0000:00:0d.3: [8086:343d] type 00 class 0x060000
[    0.792792] pci 0000:00:0d.4: [8086:3418] type 00 class 0x060000
[    0.792882] pci 0000:00:0d.5: [8086:3419] type 00 class 0x060000
[    0.792971] pci 0000:00:0d.6: [8086:341a] type 00 class 0x060000
[    0.793061] pci 0000:00:0e.0: [8086:341c] type 00 class 0x060000
[    0.793150] pci 0000:00:0e.1: [8086:341d] type 00 class 0x060000
[    0.793240] pci 0000:00:0e.2: [8086:341e] type 00 class 0x060000
[    0.793329] pci 0000:00:0e.3: [8086:341f] type 00 class 0x060000
[    0.793418] pci 0000:00:0e.4: [8086:3439] type 00 class 0x060000
[    0.793516] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[    0.793614] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[    0.793704] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[    0.793805] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    0.793868] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.793947] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    0.794010] pci 0000:00:1d.0: reg 0x20: [io  0x1000-0x101f]
[    0.794104] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    0.794166] pci 0000:00:1d.1: reg 0x20: [io  0x1020-0x103f]
[    0.794275] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    0.794338] pci 0000:00:1d.2: reg 0x20: [io  0x1040-0x105f]
[    0.794446] pci 0000:00:1d.3: [8086:3a39] type 00 class 0x0c0300
[    0.794509] pci 0000:00:1d.3: reg 0x20: [io  0x1060-0x107f]
[    0.794619] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    0.794635] pci 0000:00:1d.7: reg 0x10: [mem 0xeb8f0000-0xeb8f03ff]
[    0.794711] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.794770] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.794867] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
[    0.795137] pci 0000:00:01.0: PCI bridge to [bus 0a-0c]
[    0.795178] pci 0000:00:02.0: PCI bridge to [bus 13]
[    0.795319] pci 0000:06:00.0: [4040:0100] type 00 class 0x020000
[    0.795334] pci 0000:06:00.0: reg 0x10: [mem 0xfae00000-0xfaffffff 64bit]
[    0.795354] pci 0000:06:00.0: reg 0x20: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.795398] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.795470] pci 0000:06:00.1: [4040:0100] type 00 class 0x020000
[    0.795483] pci 0000:06:00.1: reg 0x10: [mem 0xf7e00000-0xf7ffffff 64bit]
[    0.795503] pci 0000:06:00.1: reg 0x20: [mem 0xf4000000-0xf5ffffff 64bit]
[    0.795547] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[    0.795616] pci 0000:06:00.2: [4040:0100] type 00 class 0x020000
[    0.795630] pci 0000:06:00.2: reg 0x10: [mem 0xf3e00000-0xf3ffffff 64bit]
[    0.795650] pci 0000:06:00.2: reg 0x20: [mem 0xf0000000-0xf1ffffff 64bit]
[    0.795693] pci 0000:06:00.2: PME# supported from D0 D3hot D3cold
[    0.795760] pci 0000:06:00.3: [4040:0100] type 00 class 0x020000
[    0.795774] pci 0000:06:00.3: reg 0x10: [mem 0xefe00000-0xefffffff 64bit]
[    0.795794] pci 0000:06:00.3: reg 0x20: [mem 0xec000000-0xedffffff 64bit]
[    0.795837] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.808391] pci 0000:00:03.0: PCI bridge to [bus 06-08]
[    0.808397] pci 0000:00:03.0:   bridge window [mem 0xec000000-0xfaffffff]
[    0.808445] pci 0000:00:04.0: PCI bridge to [bus 09]
[    0.808578] pci 0000:00:05.0: PCI bridge to [bus 10-12]
[    0.808626] pci 0000:05:00.0: [103c:323a] type 00 class 0x010400
[    0.808640] pci 0000:05:00.0: reg 0x10: [mem 0xebc00000-0xebffffff 64bit]
[    0.808650] pci 0000:05:00.0: reg 0x18: [mem 0xebbf0000-0xebbf0fff 64bit]
[    0.808656] pci 0000:05:00.0: reg 0x20: [io  0x4000-0x40ff]
[    0.808668] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.808704] pci 0000:05:00.0: supports D1
[    0.808705] pci 0000:05:00.0: PME# supported from D0
[    0.820379] pci 0000:00:06.0: PCI bridge to [bus 05]
[    0.820384] pci 0000:00:06.0:   bridge window [io  0x4000-0x4fff]
[    0.820387] pci 0000:00:06.0:   bridge window [mem 0xebb00000-0xebffffff]
[    0.820535] pci 0000:00:07.0: PCI bridge to [bus 0d-0f]
[    0.820576] pci 0000:00:08.0: PCI bridge to [bus 14]
[    0.820614] pci 0000:00:09.0: PCI bridge to [bus 15]
[    0.820653] pci 0000:00:0a.0: PCI bridge to [bus 16]
[    0.820788] pci 0000:00:1c.0: PCI bridge to [bus 02-04]
[    0.820842] pci 0000:01:03.0: [1002:515e] type 00 class 0x030000
[    0.820857] pci 0000:01:03.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[    0.820866] pci 0000:01:03.0: reg 0x14: [io  0x3000-0x30ff]
[    0.820874] pci 0000:01:03.0: reg 0x18: [mem 0xebaf0000-0xebafffff]
[    0.820905] pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.820933] pci 0000:01:03.0: supports D1 D2
[    0.820974] pci 0000:01:04.0: [0e11:b203] type 00 class 0x088000
[    0.820988] pci 0000:01:04.0: reg 0x10: [io  0x2800-0x28ff]
[    0.820996] pci 0000:01:04.0: reg 0x14: [mem 0xebae0000-0xebae01ff]
[    0.821060] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
[    0.821113] pci 0000:01:04.2: [0e11:b204] type 00 class 0x088000
[    0.821129] pci 0000:01:04.2: reg 0x10: [io  0x3400-0x34ff]
[    0.821138] pci 0000:01:04.2: reg 0x14: [mem 0xebad0000-0xebad07ff]
[    0.821148] pci 0000:01:04.2: reg 0x18: [mem 0xebac0000-0xebac3fff]
[    0.821157] pci 0000:01:04.2: reg 0x1c: [mem 0xeba00000-0xeba7ffff]
[    0.821213] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
[    0.821260] pci 0000:01:04.4: [103c:3300] type 00 class 0x0c0300
[    0.821309] pci 0000:01:04.4: reg 0x20: [io  0x3800-0x381f]
[    0.821356] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
[    0.821404] pci 0000:01:04.6: [103c:3302] type 00 class 0x0c0701
[    0.821418] pci 0000:01:04.6: reg 0x10: [mem 0xeb9f0000-0xeb9f00ff]
[    0.821488] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
[    0.821556] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[    0.821559] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.821562] pci 0000:00:1e.0:   bridge window [mem 0xeb900000-0xebafffff]
[    0.821566] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.821567] pci 0000:00:1e.0:   bridge window [mem 0xdf000000-0xfaffffff window] (subtractive decode)
[    0.821568] pci 0000:00:1e.0:   bridge window [io  0x1000-0x4fff window] (subtractive decode)
[    0.821570] pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.821571] pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.821572] pci 0000:00:1e.0:   bridge window [io  0x0d00-0x0fff window] (subtractive decode)
[    0.821573] pci 0000:00:1e.0:   bridge window [mem 0xfed00000-0xfed44fff window] (subtractive decode)
[    0.821574] pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03bb window] (subtractive decode)
[    0.821575] pci 0000:00:1e.0:   bridge window [io  0x03c0-0x03df window] (subtractive decode)
[    0.821577] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.821898] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 17-2c])
[    0.821901] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.821905] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.822007] PCI host bridge to bus 0000:17
[    0.822009] pci_bus 0000:17: root bus resource [mem 0xfb000000-0xfcffffff window]
[    0.822010] pci_bus 0000:17: root bus resource [bus 17-2c]
[    0.822021] pci 0000:17:01.0: [8086:3408] type 01 class 0x060400
[    0.822095] pci 0000:17:01.0: PME# supported from D0 D3hot D3cold
[    0.822179] pci 0000:17:02.0: [8086:3409] type 01 class 0x060400
[    0.822283] pci 0000:17:02.0: PME# supported from D0 D3hot D3cold
[    0.822354] pci 0000:17:03.0: [8086:340a] type 01 class 0x060400
[    0.822416] pci 0000:17:03.0: PME# supported from D0 D3hot D3cold
[    0.822498] pci 0000:17:04.0: [8086:340b] type 01 class 0x060400
[    0.822610] pci 0000:17:04.0: PME# supported from D0 D3hot D3cold
[    0.822689] pci 0000:17:05.0: [8086:340c] type 01 class 0x060400
[    0.822749] pci 0000:17:05.0: PME# supported from D0 D3hot D3cold
[    0.822829] pci 0000:17:06.0: [8086:340d] type 01 class 0x060400
[    0.822920] pci 0000:17:06.0: PME# supported from D0 D3hot D3cold
[    0.822988] pci 0000:17:07.0: [8086:340e] type 01 class 0x060400
[    0.823072] pci 0000:17:07.0: PME# supported from D0 D3hot D3cold
[    0.823154] pci 0000:17:08.0: [8086:340f] type 01 class 0x060400
[    0.823277] pci 0000:17:08.0: PME# supported from D0 D3hot D3cold
[    0.823367] pci 0000:17:09.0: [8086:3410] type 01 class 0x060400
[    0.823427] pci 0000:17:09.0: PME# supported from D0 D3hot D3cold
[    0.823519] pci 0000:17:0a.0: [8086:3411] type 01 class 0x060400
[    0.823610] pci 0000:17:0a.0: PME# supported from D0 D3hot D3cold
[    0.823678] pci 0000:17:0d.0: [8086:343a] type 00 class 0x060000
[    0.823781] pci 0000:17:0d.1: [8086:343b] type 00 class 0x060000
[    0.823896] pci 0000:17:0d.2: [8086:343c] type 00 class 0x060000
[    0.823995] pci 0000:17:0d.3: [8086:343d] type 00 class 0x060000
[    0.824094] pci 0000:17:0d.4: [8086:3418] type 00 class 0x060000
[    0.824194] pci 0000:17:0d.5: [8086:3419] type 00 class 0x060000
[    0.824292] pci 0000:17:0d.6: [8086:341a] type 00 class 0x060000
[    0.824398] pci 0000:17:0e.0: [8086:341c] type 00 class 0x060000
[    0.824498] pci 0000:17:0e.1: [8086:341d] type 00 class 0x060000
[    0.824598] pci 0000:17:0e.2: [8086:341e] type 00 class 0x060000
[    0.824697] pci 0000:17:0e.3: [8086:341f] type 00 class 0x060000
[    0.824796] pci 0000:17:0e.4: [8086:3439] type 00 class 0x060000
[    0.824896] pci 0000:17:14.0: [8086:342e] type 00 class 0x080000
[    0.825007] pci 0000:17:14.1: [8086:3422] type 00 class 0x080000
[    0.825125] pci 0000:17:14.2: [8086:3423] type 00 class 0x080000
[    0.825428] pci 0000:17:01.0: PCI bridge to [bus 18-1a]
[    0.825474] pci 0000:17:02.0: PCI bridge to [bus 28]
[    0.825619] pci 0000:17:03.0: PCI bridge to [bus 21-23]
[    0.825664] pci 0000:17:04.0: PCI bridge to [bus 29]
[    0.825708] pci 0000:17:05.0: PCI bridge to [bus 2a]
[    0.825751] pci 0000:17:06.0: PCI bridge to [bus 2b]
[    0.825886] pci 0000:17:07.0: PCI bridge to [bus 24-26]
[    0.826031] pci 0000:17:08.0: PCI bridge to [bus 1e-20]
[    0.826166] pci 0000:17:09.0: PCI bridge to [bus 1b-1d]
[    0.826210] pci 0000:17:0a.0: PCI bridge to [bus 2c]
[    0.826357] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
[    0.826400] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
[    0.826442] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
[    0.826484] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
[    0.826527] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
[    0.826570] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 *10 11)
[    0.826611] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
[    0.826653] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
[    0.826945] vgaarb: setting as boot device: PCI:0000:01:03.0
[    0.826946] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
[    0.826950] vgaarb: loaded
[    0.826950] vgaarb: bridge control possible 0000:01:03.0
[    0.827018] PCI: Using ACPI for IRQ routing
[    0.827748] PCI: Discovered peer bus 3f
[    0.827749] PCI: root bus 3f: using default resources
[    0.827749] PCI: Probing PCI hardware (bus 3f)
[    0.827778] ACPI: \: failed to evaluate _DSM (0x1001)
[    0.827778] PCI host bridge to bus 0000:3f
[    0.827780] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
[    0.827781] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xffffffffff]
[    0.827782] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[    0.827786] pci 0000:3f:00.0: [8086:2c40] type 00 class 0x060000
[    0.827828] pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000
[    0.827871] pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000
[    0.827909] pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000
[    0.827949] pci 0000:3f:02.4: [8086:2c14] type 00 class 0x060000
[    0.827987] pci 0000:3f:02.5: [8086:2c15] type 00 class 0x060000
[    0.828028] pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000
[    0.828066] pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000
[    0.828105] pci 0000:3f:03.2: [8086:2c1a] type 00 class 0x060000
[    0.828143] pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000
[    0.828182] pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000
[    0.828220] pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000
[    0.828258] pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000
[    0.828296] pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000
[    0.828337] pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000
[    0.828380] pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000
[    0.828420] pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000
[    0.828458] pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000
[    0.828498] pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000
[    0.828536] pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000
[    0.828574] pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000
[    0.828615] pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000
[    0.828664] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[    0.828669] PCI: pci_cache_line_size set to 64 bytes
[    0.828815] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.828816] e820: reserve RAM buffer [mem 0x7f62f000-0x7fffffff]
[    0.828817] e820: reserve RAM buffer [mem 0x7f63d000-0x7fffffff]
[    0.828959] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.828963] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.828965] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.831185] clocksource: Switched to clocksource hpet
[    0.837416] VFS: Disk quotas dquot_6.6.0
[    0.837463] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.837555] pnp: PnP ACPI init
[    0.837824] system 00:00: [io  0x0408-0x040f] has been reserved
[    0.837826] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.837827] system 00:00: [io  0x0700-0x071f] has been reserved
[    0.837828] system 00:00: [io  0x0880-0x08ff] has been reserved
[    0.837830] system 00:00: [io  0x0900-0x097f] has been reserved
[    0.837831] system 00:00: [io  0x0c80-0x0c83] has been reserved
[    0.837832] system 00:00: [io  0x0cd4-0x0cd7] has been reserved
[    0.837834] system 00:00: [io  0x0f50-0x0f58] has been reserved
[    0.837835] system 00:00: [io  0x0ca0-0x0ca1] has been reserved
[    0.837836] system 00:00: [io  0x0ca4-0x0ca5] has been reserved
[    0.837838] system 00:00: [io  0x02f8-0x02ff] has been reserved
[    0.837840] system 00:00: [mem 0xd8000000-0xdbffffff] has been reserved
[    0.837841] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.837843] system 00:00: [mem 0xdfffe000-0xdfffffff] has been reserved
[    0.837844] system 00:00: [mem 0xfbffe000-0xfbffffff] has been reserved
[    0.837847] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.837888] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.837913] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[    0.838099] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[    0.838153] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.838323] pnp: PnP ACPI: found 5 devices
[    0.844487] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.844558] pci 0000:00:01.0: PCI bridge to [bus 0a-0c]
[    0.844566] pci 0000:00:02.0: PCI bridge to [bus 13]
[    0.844573] pci 0000:00:03.0: PCI bridge to [bus 06-08]
[    0.844576] pci 0000:00:03.0:   bridge window [mem 0xec000000-0xfaffffff]
[    0.844581] pci 0000:00:04.0: PCI bridge to [bus 09]
[    0.844588] pci 0000:00:05.0: PCI bridge to [bus 10-12]
[    0.844598] pci 0000:05:00.0: BAR 6: assigned [mem 0xebb00000-0xebb7ffff pref]
[    0.844599] pci 0000:00:06.0: PCI bridge to [bus 05]
[    0.844601] pci 0000:00:06.0:   bridge window [io  0x4000-0x4fff]
[    0.844604] pci 0000:00:06.0:   bridge window [mem 0xebb00000-0xebffffff]
[    0.844609] pci 0000:00:07.0: PCI bridge to [bus 0d-0f]
[    0.844615] pci 0000:00:08.0: PCI bridge to [bus 14]
[    0.844622] pci 0000:00:09.0: PCI bridge to [bus 15]
[    0.844629] pci 0000:00:0a.0: PCI bridge to [bus 16]
[    0.844636] pci 0000:00:1c.0: PCI bridge to [bus 02-04]
[    0.844646] pci 0000:01:03.0: BAR 6: assigned [mem 0xeb900000-0xeb91ffff pref]
[    0.844648] pci 0000:00:1e.0: PCI bridge to [bus 01]
[    0.844650] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.844653] pci 0000:00:1e.0:   bridge window [mem 0xeb900000-0xebafffff]
[    0.844656] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.844660] pci_bus 0000:00: resource 4 [mem 0xdf000000-0xfaffffff window]
[    0.844661] pci_bus 0000:00: resource 5 [io  0x1000-0x4fff window]
[    0.844662] pci_bus 0000:00: resource 6 [io  0x0000-0x03af window]
[    0.844664] pci_bus 0000:00: resource 7 [io  0x03e0-0x0cf7 window]
[    0.844665] pci_bus 0000:00: resource 8 [io  0x0d00-0x0fff window]
[    0.844666] pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff window]
[    0.844667] pci_bus 0000:00: resource 10 [io  0x03b0-0x03bb window]
[    0.844668] pci_bus 0000:00: resource 11 [io  0x03c0-0x03df window]
[    0.844669] pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff window]
[    0.844670] pci_bus 0000:06: resource 1 [mem 0xec000000-0xfaffffff]
[    0.844672] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.844673] pci_bus 0000:05: resource 1 [mem 0xebb00000-0xebffffff]
[    0.844674] pci_bus 0000:01: resource 0 [io  0x2000-0x3fff]
[    0.844675] pci_bus 0000:01: resource 1 [mem 0xeb900000-0xebafffff]
[    0.844676] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.844678] pci_bus 0000:01: resource 4 [mem 0xdf000000-0xfaffffff window]
[    0.844679] pci_bus 0000:01: resource 5 [io  0x1000-0x4fff window]
[    0.844680] pci_bus 0000:01: resource 6 [io  0x0000-0x03af window]
[    0.844681] pci_bus 0000:01: resource 7 [io  0x03e0-0x0cf7 window]
[    0.844682] pci_bus 0000:01: resource 8 [io  0x0d00-0x0fff window]
[    0.844683] pci_bus 0000:01: resource 9 [mem 0xfed00000-0xfed44fff window]
[    0.844684] pci_bus 0000:01: resource 10 [io  0x03b0-0x03bb window]
[    0.844685] pci_bus 0000:01: resource 11 [io  0x03c0-0x03df window]
[    0.844686] pci_bus 0000:01: resource 12 [mem 0x000a0000-0x000bffff window]
[    0.844780] pci 0000:17:01.0: PCI bridge to [bus 18-1a]
[    0.844788] pci 0000:17:02.0: PCI bridge to [bus 28]
[    0.844796] pci 0000:17:03.0: PCI bridge to [bus 21-23]
[    0.844804] pci 0000:17:04.0: PCI bridge to [bus 29]
[    0.844811] pci 0000:17:05.0: PCI bridge to [bus 2a]
[    0.844819] pci 0000:17:06.0: PCI bridge to [bus 2b]
[    0.844827] pci 0000:17:07.0: PCI bridge to [bus 24-26]
[    0.844835] pci 0000:17:08.0: PCI bridge to [bus 1e-20]
[    0.844842] pci 0000:17:09.0: PCI bridge to [bus 1b-1d]
[    0.844850] pci 0000:17:0a.0: PCI bridge to [bus 2c]
[    0.844859] pci_bus 0000:17: resource 4 [mem 0xfb000000-0xfcffffff window]
[    0.844884] pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
[    0.844885] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xffffffffff]
[    0.844952] NET: Registered protocol family 2
[    0.845214] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.845264] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.845340] TCP: Hash tables configured (established 16384 bind 16384)
[    0.845366] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.845376] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.845476] NET: Registered protocol family 1
[    0.863322] pci 0000:01:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.868646] PCI: CLS 64 bytes, default 64
[    0.868687] Unpacking initramfs...
[    1.210725] Freeing initrd memory: 18952K
[    1.210772] DMAR: Host address width 39
[    1.210774] DMAR: DRHD base: 0x000000fbffe000 flags: 0x0
[    1.210801] DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f0207e
[    1.210802] DMAR: DRHD base: 0x000000dfffe000 flags: 0x1
[    1.210807] DMAR: dmar1: reg_base_addr dfffe000 ver 1:0 cap c90780106f0462 ecap f0207e
[    1.210808] DMAR: RMRR base: 0x0000007f7fc000 end: 0x0000007f7fdfff
[    1.210809] DMAR: RMRR base: 0x0000007f7f5000 end: 0x0000007f7fafff
[    1.210810] DMAR: RMRR base: 0x0000007f63e000 end: 0x0000007f63ffff
[    1.210811] DMAR: ATSR flags: 0x0
[    1.210813] DMAR: ATSR flags: 0x0
[    1.211616] audit: initializing netlink subsys (disabled)
[    1.211635] audit: type=2000 audit(1511891692.104:1): initialized
[    1.212036] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    1.212094] zbud: loaded
[    1.212728] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.212761] io scheduler noop registered
[    1.212762] io scheduler deadline registered
[    1.212780] io scheduler cfq registered (default)
[    1.213793] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.213798] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.213809] intel_idle: MWAIT substates: 0x1120
[    1.213810] intel_idle: v0.4.1 model 0x1A
[    1.214068] intel_idle: lapic_timer_reliable_states 0x2
[    1.214269] GHES: HEST is not enabled!
[    1.214320] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.234838] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.235426] Linux agpgart interface v0.103
[    1.235534] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.235535] AMD IOMMUv2 functionality not available on this system
[    1.236290] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[    1.238157] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.238162] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.238536] mousedev: PS/2 mouse device common for all mice
[    1.238599] rtc_cmos 00:04: RTC can wake from S4
[    1.238789] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.238811] rtc_cmos 00:04: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.239154] ledtrig-cpu: registered to indicate activity on CPUs
[    1.240176] NET: Registered protocol family 10
[    1.241045] mip6: Mobile IPv6
[    1.241047] NET: Registered protocol family 17
[    1.241050] mpls_gso: MPLS GSO support
[    1.241647] microcode: sig=0x106a5, pf=0x1, revision=0x15
[    1.242089] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.242501] registered taskstats version 1
[    1.242526] zswap: loaded using pool lzo/zbud
[    1.242862] ima: No TPM chip found, activating TPM-bypass!
[    1.243479] rtc_cmos 00:04: setting system clock to 2017-11-28 17:54:52 UTC (1511891692)
[    1.243510] PM: Hibernation image not present or could not be loaded.
[    1.245502] Freeing unused kernel memory: 1396K
[    1.245503] Write protecting the kernel read-only data: 12288k
[    1.247051] Freeing unused kernel memory: 1980K
[    1.251608] Freeing unused kernel memory: 1240K
[    1.260335] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.280037] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.280134] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.280148] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.281479] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.281522] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.284180] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.284200] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.284270] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.284727] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.284809] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.327686] Floppy drive(s): fd0 is 1.44M
[    1.330547] thermal LNXTHERM:00: registered as thermal_zone0
[    1.330548] ACPI: Thermal Zone [THM0] (8 C)
[    1.331446] QLogic/NetXen Network Driver v4.0.82
[    1.331548] netxen_nic 0000:06:00.0: 2MB memory map
[    1.331679] netxen_nic 0000:06:00.0: Flash fw[4.0.406] is < min fw supported[4.0.505]. Please update firmware on flash
[    1.331718] netxen_nic: probe of 0000:06:00.0 failed with error -22
[    1.331771] netxen_nic 0000:06:00.1: 2MB memory map
[    1.331901] netxen_nic 0000:06:00.1: Flash fw[4.0.406] is < min fw supported[4.0.505]. Please update firmware on flash
[    1.331936] netxen_nic: probe of 0000:06:00.1 failed with error -22
[    1.331992] netxen_nic 0000:06:00.2: 2MB memory map
[    1.332122] netxen_nic 0000:06:00.2: Flash fw[4.0.406] is < min fw supported[4.0.505]. Please update firmware on flash
[    1.332158] netxen_nic: probe of 0000:06:00.2 failed with error -22
[    1.332211] netxen_nic 0000:06:00.3: 2MB memory map
[    1.332340] netxen_nic 0000:06:00.3: Flash fw[4.0.406] is < min fw supported[4.0.505]. Please update firmware on flash
[    1.332374] netxen_nic: probe of 0000:06:00.3 failed with error -22
[    1.333498] SCSI subsystem initialized
[    1.334366] HP HPSA Driver (v 3.4.16-0)
[    1.334374] hpsa 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.334439] hpsa 0000:05:00.0: MSI-X capable controller
[    1.334573] hpsa 0000:05:00.0: Logical aborts not supported
[    1.334574] hpsa 0000:05:00.0: HP SSD Smart Path aborts not supported
[    1.336879] ACPI: bus type USB registered
[    1.336911] usbcore: registered new interface driver usbfs
[    1.336925] usbcore: registered new interface driver hub
[    1.336981] usbcore: registered new device driver usb
[    1.337632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.337908] ehci-pci: EHCI PCI platform driver
[    1.338140] uhci_hcd: USB Universal Host Controller Interface driver
[    1.338153] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.338161] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.338174] ehci-pci 0000:00:1d.7: debug port 1
[    1.342062] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.342079] ehci-pci 0000:00:1d.7: irq 20, io mem 0xeb8f0000
[    1.359411] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.359491] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.359493] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.359495] usb usb1: Product: EHCI Host Controller
[    1.359497] usb usb1: Manufacturer: Linux 4.9.0-4-amd64 ehci_hcd
[    1.359498] usb usb1: SerialNumber: 0000:00:1d.7
[    1.359809] hub 1-0:1.0: USB hub found
[    1.359824] hub 1-0:1.0: 8 ports detected
[    1.360393] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.360406] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.360415] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.360437] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000
[    1.360845] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.360848] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.360850] usb usb2: Product: UHCI Host Controller
[    1.360851] usb usb2: Manufacturer: Linux 4.9.0-4-amd64 uhci_hcd
[    1.360853] usb usb2: SerialNumber: 0000:00:1d.0
[    1.361186] hub 2-0:1.0: USB hub found
[    1.361252] hub 2-0:1.0: 2 ports detected
[    1.361825] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.361831] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.361838] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.361865] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001020
=1
[    1.370677] usb usb6: Product: UHCI Host Controller
[    1.370679] usb usb6: Manufacturer: Linux 4.9.0-4-amd64 uhci_hcd
[    1.370680] usb usb6: SerialNumber: 0000:01:04.4
[    1.370946] hub 6-0:1.0: USB hub found
[    1.370957] hub 6-0:1.0: 2 ports detected
[    1.375764] scsi host0: hpsa
[    1.390041] hpsa 0000:05:00.0: scsi 0:0:0:0: added RAID              HP       P410i            controller SSDSmartPathCap- En- Exp=1
[    1.390046] hpsa 0000:05:00.0: scsi 0:0:1:0: masked Direct-Access     HP       DG0146FARVU      PHYS DRV SSDSmartPathCap- En- Exp=0
[    1.390049] hpsa 0000:05:00.0: scsi 0:0:2:0: masked Direct-Access     HP       DG0146FARVU      PHYS DRV SSDSmartPathCap- En- Exp=0
[    1.390052] hpsa 0000:05:00.0: scsi 0:0:3:0: masked Direct-Access     HP       DG0146FAMWL      PHYS DRV SSDSmartPathCap- En- Exp=0
[    1.390055] hpsa 0000:05:00.0: scsi 0:0:4:0: masked Direct-Access     HP       DG0146FARVU      PHYS DRV SSDSmartPathCap- En- Exp=0
[    1.390059] hpsa 0000:05:00.0: scsi 0:0:5:0: masked Direct-Access     HP       DG0146FARVU      PHYS DRV SSDSmartPathCap- En- Exp=0
[    1.390062] hpsa 0000:05:00.0: scsi 0:0:6:0: masked Enclosure         PMCSIERA  SRC 8x6G        enclosure SSDSmartPathCap- En- Exp=0
[    1.390065] hpsa 0000:05:00.0: scsi 0:1:0:0: added Direct-Access     HP       LOGICAL VOLUME   RAID-5 SSDSmartPathCap- En- Exp=1
[    1.390953] scsi 0:0:0:0: RAID              HP       P410i            3.52 PQ: 0 ANSI: 5
[    1.436056] scsi 0:1:0:0: Direct-Access     HP       LOGICAL VOLUME   3.52 PQ: 0 ANSI: 5
[    1.479634] sd 0:1:0:0: [sda] 1146733360 512-byte logical blocks: (587 GB/547 GiB)
[    1.479893] sd 0:1:0:0: [sda] Write Protect is off
[    1.479896] sd 0:1:0:0: [sda] Mode Sense: 6b 00 00 08
[    1.480050] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    1.487483] uhci_hcd 0000:01:04.4: Controller not stopped yet!
[    1.488059]  sda: sda1 sda2 < sda5 >
[    1.489654] sd 0:1:0:0: [sda] Attached SCSI disk
[    1.747319] random: fast init done
[    1.827342] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[    2.052396] usb 4-2: New USB device found, idVendor=1a2c, idProduct=0b23
[    2.052397] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.052398] usb 4-2: Product: USB Keyboard
[    2.052399] usb 4-2: Manufacturer: USB
[    2.057890] hidraw: raw HID events driver (C) Jiri Kosina
[    2.091609] usbcore: registered new interface driver usbhid
[    2.091610] usbhid: USB HID core driver
[    2.092359] input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:1A2C:0B23.0001/input/input3
[    2.151475] hid-generic 0003:1A2C:0B23.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:1d.2-2/input0
[    2.151687] input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:1A2C:0B23.0002/input/input4
[    2.211416] hid-generic 0003:1A2C:0B23.0002: input,hidraw1: USB HID v1.10 Mouse [USB USB Keyboard] on usb-0000:00:1d.2-2/input1
[    2.215428] tsc: Refined TSC clocksource calibration: 2532.613 MHz
[    2.215434] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2481921a2d0, max_idle_ns: 440795281605 ns
[    3.239675] clocksource: Switched to clocksource tsc
[    4.423608] floppy0: no floppy controllers found
[    4.423617] work still pending
[    4.473615] PM: Starting manual resume from disk
[    4.473619] PM: Hibernation image partition 8:5 present
[    4.473619] PM: Looking for hibernation image.
[    4.473771] PM: Image not found (code -22)
[    4.473773] PM: Hibernation image not present or could not be loaded.
[    4.735756] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.443893] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.508005] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.508263] systemd[1]: Detected architecture x86-64.
[    5.509793] systemd[1]: Set hostname to <debian>.
[    5.934311] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.934409] systemd[1]: Listening on Journal Socket.
[    5.934461] systemd[1]: Listening on udev Control Socket.
[    5.934648] systemd[1]: Created slice System Slice.
[    5.939400] systemd[1]: Mounting POSIX Message Queue File System...
[    5.939628] systemd[1]: Created slice system-getty.slice.
[    5.940316] systemd[1]: Mounting Huge Pages File System...
[    6.227772] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.339848] systemd-journald[219]: Received request to flush runtime journal from PID 1
[    6.689837] pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1600 MHz, 2533 MHz
[    6.980374] EDAC MC: Ver: 3.0.0
[    6.995088] ipmi message handler version 39.2
[    7.020156] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    7.020160] ACPI: Power Button [PWRF]
[    7.020269] ipmi_si IPI0001:00: ipmi_si: probing via ACPI
[    7.020295] ipmi_si IPI0001:00: [io  0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
[    7.020296] ipmi_si: Adding ACPI-specified kcs state machine
[    7.020316] IPMI System Interface driver.
[    7.020336] ipmi_si 0000:01:04.6: probing via PCI
[    7.020431] ipmi_si 0000:01:04.6: [mem 0xeb9f0000-0xeb9f00ff] regsize 1 spacing 1 irq 21
[    7.020432] ipmi_si: Adding PCI-specified kcs state machine
[    7.020459] ipmi_si: probing via SMBIOS
[    7.020460] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[    7.020461] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
[    7.020463] ipmi_si: probing via SPMI
[    7.020464] ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
[    7.020465] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
[    7.020467] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xeb9f0000, slave address 0x0, irq 21
[    7.026896] Floppy drive(s): fd0 is 1.44M
[    7.029384] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (INTERRUPT)
[    7.029425] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[    7.029442] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[    7.036538] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.037453] power_meter ACPI000D:00: Found ACPI power meter.
[    7.037474] power_meter ACPI000D:00: Ignoring unsafe software power cap!
[    7.066051] ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092F conflicts with OpRegion 0x0000000000000920-0x000000000000092F (\SGPE) (20160831/utaddress-247)
[    7.066058] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.066093] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.068594] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    7.092864] scsi 0:0:0:0: Attached scsi generic sg0 type 12
[    7.092898] sd 0:1:0:0: Attached scsi generic sg1 type 0
[    7.129569] hpwdt 0000:01:04.0: HPE Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 1/ON)
[    7.129628] hpwdt 0000:01:04.0: HPE Watchdog Timer Driver: 1.4.0, timer margin: 30 seconds (nowayout=0).
[    7.129631] iTCO_vendor_support: vendor-support=0
[    7.149381] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.149404] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    7.217942] [drm] Initialized
[    7.274787] [drm] radeon kernel modesetting enabled.
[    7.494159] CRAT table not found
[    7.494160] Finished initializing topology ret=0
[    7.494182] kfd kfd: Initialized module
[    7.494621] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB 0x02).
[    7.494635] [drm] register mmio base: 0xEBAF0000
[    7.494636] [drm] register mmio size: 65536
[    7.494747] radeon 0000:01:03.0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (64M used)
[    7.494749] radeon 0000:01:03.0: GTT: 512M 0x00000000C0000000 - 0x00000000DFFFFFFF
[    7.494759] [drm] Detected VRAM RAM=128M, BAR=128M
[    7.494760] [drm] RAM width 16bits DDR
[    7.494805] [TTM] Zone  kernel: Available graphics memory: 1019044 kiB
[    7.494805] [TTM] Initializing pool allocator
[    7.494811] [TTM] Initializing DMA pool allocator
[    7.494835] [drm] radeon: 64M of VRAM memory ready
[    7.494835] [drm] radeon: 512M of GTT memory ready.
[    7.494845] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    7.515364] [drm] PCI GART of 512M enabled (table at 0x0000000079F80000).
[    7.515461] radeon 0000:01:03.0: WB disabled
[    7.515466] radeon 0000:01:03.0: fence driver on ring 0 use gpu addr 0x00000000c0000000 and cpu addr 0xffff9b94f9f16000
[    7.515472] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.515473] [drm] Driver supports precise vblank timestamp query.
[    7.515487] [drm] radeon: irq initialized.
[    7.515501] [drm] Loading R100 Microcode
[    7.516002] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    7.525836] radeon 0000:01:03.0: firmware: direct-loading firmware radeon/R100_cp.bin
[    7.526729] [drm] radeon: ring at 0x00000000C0001000
[    7.526774] [drm] ring test succeeded in 1 usecs
[    7.564987] random: crng init done
[    7.600992] Adding 2084860k swap on /dev/sda5.  Priority:-1 extents:1 across:2084860k FS
[    8.039740] [drm] ib test succeeded in 0 usecs
[    8.040013] [drm] No TV DAC info found in BIOS
[    8.040057] [drm] Radeon Display Connectors
[    8.040057] [drm] Connector 0:
[    8.040058] [drm]   VGA-1
[    8.040060] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    8.040060] [drm]   Encoders:
[    8.040061] [drm]     CRT1: INTERNAL_DAC1
[    8.040062] [drm] Connector 1:
[    8.040063] [drm]   VGA-2
[    8.040064] [drm]   DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[    8.040064] [drm]   Encoders:
[    8.040065] [drm]     CRT2: INTERNAL_DAC2
[    8.112057] [drm] fb mappable at 0xE0040000
[    8.112058] [drm] vram apper at 0xE0000000
[    8.112058] [drm] size 1081344
[    8.112059] [drm] fb depth is 8
[    8.112059] [drm]    pitch is 1408
[    8.112243] fbcon: radeondrmfb (fb0) is primary device
[    8.275849] CE: hpet increased min_delta_ns to 20115 nsec
[    8.277711] Console: switching to colour frame buffer device 170x48
[    8.290095] radeon 0000:01:03.0: fb0: radeondrmfb frame buffer device
[    8.315952] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:03.0 on minor 0
[   10.055900] floppy0: no floppy controllers found
[   10.055910] work still pending
[  117.317805] ipmi_si: There appears to be no BMC at this location
[  117.333899] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[  227.432041] ipmi_si: There appears to be no BMC at this location
[  916.470599] usb 1-5: new high-speed USB device number 3 using ehci-pci
[  916.620311] usb 1-5: New USB device found, idVendor=0781, idProduct=5567
[  916.620314] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  916.620315] usb 1-5: Product: Cruzer Blade
[  916.620317] usb 1-5: Manufacturer: SanDisk
[  916.620318] usb 1-5: SerialNumber: 4C530001310824123262
[  916.689497] usb-storage 1-5:1.0: USB Mass Storage device detected
[  916.689576] scsi host1: usb-storage 1-5:1.0
[  916.689647] usbcore: registered new interface driver usb-storage
[  916.698330] usbcore: registered new interface driver uas
[  917.692480] scsi 1:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.00 PQ: 0 ANSI: 6
[  917.693535] sd 1:0:0:0: Attached scsi generic sg2 type 0
[  917.694156] sd 1:0:0:0: [sdb] 15232000 512-byte logical blocks: (7.80 GB/7.26 GiB)
[  917.695784] sd 1:0:0:0: [sdb] Write Protect is off
[  917.695786] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  917.696981] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  917.707913]  sdb: sdb1
[  917.712525] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[  961.503709] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sarksloane
 
Posts: 75
Joined: 2017-01-17 04:21

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby 4D696B65 » 2017-12-20 19:41

Looks like you need a newer kernel and newer firmware-netxen
User avatar
4D696B65
 
Posts: 2190
Joined: 2009-06-28 06:09

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby sarksloane » 2017-12-21 10:58

4D696B65 wrote:Looks like you need a newer kernel and newer firmware-netxen


I tried again to do the installation from the very beginning and tried to load the missing firmware from usb unfortunately I received the below error.

Code: Select all
No kernel modules were found. This probably is due to a mismatch between the kernel used by this version of the installer and the kernel version available in the archive.

If you're installing from a mirror, you can work around this problem by choosing to install a different version of Debian. The install will probably fail to work if you continue without kernel modules."

"Continue to install without loading kernel modules?"


Please, how can I get a newer kernel and newer firmware-netxen? thanks.
sarksloane
 
Posts: 75
Joined: 2017-01-17 04:21

Re: Ethernet card driver for HP Proliant Tower server ML370

Postby 4D696B65 » 2017-12-21 19:49

sarksloane wrote:Please, how can I get a newer kernel and newer firmware-netxen? thanks.

Backports or run Buster.
User avatar
4D696B65
 
Posts: 2190
Joined: 2009-06-28 06:09

PreviousNext

Return to Beginners Questions

Who is online

Users browsing this forum: No registered users and 5 guests

fashionable