monoblock monitor does not work

New to Debian (Or Linux in general)? Ask your questions here!

monoblock monitor does not work

Postby dronnet » 2018-03-30 11:43

Hi people,

I can not solve the question:
if you install debian8, mint17 and so on. the monitor works fine

if you install debian 9, min 18, etc. the monitor first shows the download, and then completely black.

I tried to install the kernel 3.16.0-4 on Debian 9, in this case the monitor works.

What is the problem?

the monitor is connected to DP-2

dron@dron:~$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
1920x1080 60.00*+ 50.00 59.94
1920x1080i 60.00 50.00 59.94
1680x1050 59.88
1280x1024 75.02 60.02
1440x900 74.98 59.90
1280x720 60.00 50.00 59.94
1024x768 75.03 60.00
800x600 75.00 60.32
720x576 50.00
720x576i 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 75.00 72.81 66.67 60.00 59.94
720x400 70.08
HDMI-2 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
dronnet
 
Posts: 17
Joined: 2018-03-30 11:26

Re: monoblock monitor does not work

Postby debiman » 2018-03-30 12:47

so it's your second monitor, and the first one works ok?

have you tried using graphical display settings to activate it?
i use arandr.

what does "monoblock" mean?
User avatar
debiman
 
Posts: 2499
Joined: 2013-03-12 07:18

Re: monoblock monitor does not work

Postby dronnet » 2018-04-02 05:26

Good day.

Yes, now there is a second monitor, the port of HDMI-1.

The first monitor (main) should work on the interface DP-2, but does not work.

If you start debian 8 then the main monitor (DP-2) works.

"Monoblock" - all in one computer.
dronnet
 
Posts: 17
Joined: 2018-03-30 11:26

Re: monoblock monitor does not work

Postby dronnet » 2018-04-02 06:47

If you start with the kernel 3.16.0-4 then both monitors work.

Code: Select all
dron@dron:~$ xrandr
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
   1920x1080     60.00*+  50.00    59.94 
   1920x1080i    60.00    50.00    59.94 
   1680x1050     59.88 
   1280x1024     75.02    60.02 
   1440x900      74.98    59.90 
   1280x720      60.00    50.00    59.94 
   1440x576i     50.00 
   1024x768      75.08    60.00 
   1440x480i     60.00    59.94 
   800x600       75.00    60.32 
   720x576       50.00 
   720x480       60.00    59.94 
   640x480       75.00    72.81    66.67    60.00    59.94 
   720x400       70.08 
HDMI-2 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 476mm x 268mm
   1920x1080     59.97*+
   1024x768      85.00 
   848x480       60.00 
dron@dron:~$
dronnet
 
Posts: 17
Joined: 2018-03-30 11:26

Re: monoblock monitor does not work

Postby debiman » 2018-04-02 12:15

what, just downgrading the kernel helped?
sorry, i see now you mentioned this in post #1.

please UNplug the monitor, then enter
Code: Select all
dmesg -w
then re-plug the monitor and see what you get.

also
Code: Select all
lspci -k


and let's stick to debian for this thread, no linux mint.
User avatar
debiman
 
Posts: 2499
Joined: 2013-03-12 07:18

Re: monoblock monitor does not work

Postby dronnet » 2018-04-02 12:42

without monitor HDMI-1
Code: Select all
dron@dron:~$ dmesg -w
[    0.000000] CPU0 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.51-2 (2017-12-03)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=ec6cf26f-5d8d-464a-a43f-d506abc11d19 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d5cc9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d5cca000-0x00000000d62bffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d62c0000-0x00000000d6522fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d6523000-0x00000000d652efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d652f000-0x00000000d653ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d6540000-0x00000000d6544fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d6545000-0x00000000d6587fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d6588000-0x00000000d6dc5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d6dc6000-0x00000000d6ff2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d6ff3000-0x00000000d6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ECS H61H-G11/H61H-G11, BIOS 4.6.5 05/22/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000                                                                               
[    0.000000] MTRR default type: uncachable                                                                                                     
[    0.000000] MTRR fixed ranges enabled:                                                                                                         
[    0.000000]   00000-9FFFF write-back                                                                                                           
[    0.000000]   A0000-BFFFF uncachable                                                                                                           
[    0.000000]   C0000-CFFFF write-protect                                                                                                       
[    0.000000]   D0000-E7FFF uncachable                                                                                                           
[    0.000000]   E8000-FFFFF write-protect                                                                                                       
[    0.000000] MTRR variable ranges enabled:                                                                                                     
[    0.000000]   0 base 000000000 mask F00000000 write-back                                                                                       
[    0.000000]   1 base 100000000 mask FE0000000 write-back                                                                                       
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable                                                                                       
[    0.000000]   3 base 0D8000000 mask FF8000000 uncachable                                                                                       
[    0.000000]   4 base 0D7800000 mask FFF800000 uncachable                                                                                       
[    0.000000]   5 base 11F800000 mask FFF800000 uncachable
[    0.000000]   6 base 11F600000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xd7800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xd7000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fccb0-0x000fccbf] mapped at [ffff8800000fccb0]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11f400000-0x11f5fffff]
[    0.000000]  [mem 0x11f400000-0x11f5fffff] page 2M
[    0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11f3fffff]
[    0.000000]  [mem 0x11c000000-0x11f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01afa000, 0x01afafff] PGTABLE
[    0.000000] BRK [0x01afb000, 0x01afbfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xd5cc9fff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xd5bfffff] page 2M
[    0.000000]  [mem 0xd5c00000-0xd5cc9fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xd6588000-0xd6dc5fff]
[    0.000000]  [mem 0xd6588000-0xd65fffff] page 4k
[    0.000000]  [mem 0xd6600000-0xd6bfffff] page 2M
[    0.000000]  [mem 0xd6c00000-0xd6dc5fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xd6ff3000-0xd6ffffff]
[    0.000000]  [mem 0xd6ff3000-0xd6ffffff] page 4k
[    0.000000] RAMDISK: [mem 0x36119000-0x37083fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000D6523070 000064 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D652C898 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000D6523168 00972B (v02 ALASKA A M I    00000015 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000D653EF80 000040
[    0.000000] ACPI: APIC 0x00000000D652C990 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000D652CA08 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000D652CA48 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000D652CA80 000460 (v01 IdeRef IdeTable 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000D652CEE0 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000D652D890 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000D652E328 0000B0 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11f5fffff]
[    0.000000]   NODE_DATA [mem 0x11f5f5000-0x11f5f9fff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xd5cc9fff]
[    0.000000]   node   0: [mem 0xd6588000-0xd6dc5fff]
[    0.000000]   node   0: [mem 0xd6ff3000-0xd6ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11f5fffff]
[    0.000000] On node 0 totalpages: 1005745
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11939 pages used for memmap
[    0.000000]   DMA32 zone: 873236 pages, LIFO batch:31
[    0.000000]   Normal zone: 1757 pages used for memmap
[    0.000000]   Normal zone: 128512 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xd7a00000-0xdf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd5cca000-0xd62bffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd62c0000-0xd6522fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6523000-0xd652efff]
[    0.000000] PM: Registered nosave memory: [mem 0xd652f000-0xd653ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6540000-0xd6544fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6545000-0xd6587fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6dc6000-0xd6ff2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7000000-0xd77fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011f200000 s81664 r8192 d20736 u524288
[    0.000000] pcpu-alloc: s81664 r8192 d20736 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 991972
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=ec6cf26f-5d8d-464a-a43f-d506abc11d19 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3871736K/4022980K available (5291K kernel code, 949K rwdata, 1836K rodata, 1208K init, 840K bss, 151244K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3192.997 MHz processor
[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.99 BogoMIPS (lpj=12771988)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000033] ACPI: Core revision 20140424
[    0.005118] ACPI: All ACPI Tables successfully acquired
[    0.005139] Security Framework initialized
[    0.005146] AppArmor: AppArmor disabled by boot time parameter
[    0.005147] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.005334] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.006302] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.006745] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006749] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006941] Initializing cgroup subsys memory
[    0.006945] Initializing cgroup subsys devices
[    0.006950] Initializing cgroup subsys freezer
[    0.006952] Initializing cgroup subsys net_cls
[    0.006956] Initializing cgroup subsys blkio
[    0.006959] Initializing cgroup subsys perf_event
[    0.006960] Initializing cgroup subsys net_prio
[    0.006980] CPU: Physical Processor ID: 0
[    0.006981] CPU: Processor Core ID: 0
[    0.006985] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
               ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.007263] mce: CPU supports 9 MCE banks
[    0.007273] CPU0: Thermal monitoring enabled (TM1)
[    0.007278] process: using mwait in idle threads
[    0.007281] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
               Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
               tlb_flushall_shift: 2
[    0.007371] Freeing SMP alternatives memory: 20K (ffffffff81a1d000 - ffffffff81a22000)
[    0.008429] ftrace: allocating 21712 entries in 85 pages
[    0.015690] dmar: Host address width 36
[    0.015691] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.015698] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.015699] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[    0.015703] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.015704] dmar: RMRR base: 0x000000d6243000 end: 0x000000d6253fff
[    0.015705] dmar: RMRR base: 0x000000d7800000 end: 0x000000df9fffff
[    0.015774] IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.015775] HPET id 0 under DRHD base 0xfed91000
[    0.015776] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.015928] Enabled IRQ remapping in x2apic mode
[    0.015929] Enabling x2apic
[    0.015930] Enabled x2apic
[    0.015934] Switched APIC routing to cluster x2apic.
[    0.016362] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056082] smpboot: CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (fam: 06, model: 3a, stepping: 09)
[    0.056088] TSC deadline timer enabled
[    0.056103] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.056118] ... version:                3
[    0.056119] ... bit width:              48
[    0.056119] ... generic registers:      8
[    0.056120] ... value mask:             0000ffffffffffff
[    0.056121] ... max period:             00007fffffffffff
[    0.056121] ... fixed-purpose events:   3
[    0.056122] ... event mask:             00000007000000ff
[    0.057172] x86: Booting SMP configuration:
[    0.057173] .... node  #0, CPUs:      #1
[    0.067841] CPU1 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.070565] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.070646]  #2
[    0.081074] CPU2 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.084076]  #3
[    0.094495] CPU3 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.097434] x86: Booted up 1 node, 4 CPUs
[    0.097436] smpboot: Total of 4 processors activated (25543.97 BogoMIPS)
[    0.099784] devtmpfs: initialized
[    0.101839] PM: Registering ACPI NVS region [mem 0xd62c0000-0xd6522fff] (2502656 bytes)
[    0.101876] PM: Registering ACPI NVS region [mem 0xd652f000-0xd653ffff] (69632 bytes)
[    0.101878] PM: Registering ACPI NVS region [mem 0xd6545000-0xd6587fff] (274432 bytes)
[    0.101938] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.102551] pinctrl core: initialized pinctrl subsystem
[    0.102606] NET: Registered protocol family 16
[    0.102694] cpuidle: using governor ladder
[    0.102696] cpuidle: using governor menu
[    0.102726] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.102727] ACPI: bus type PCI registered
[    0.102728] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.102789] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.102791] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.102855] PCI: Using configuration type 1 for base access
[    0.117813] ACPI: Added _OSI(Module Device)
[    0.117815] ACPI: Added _OSI(Processor Device)
[    0.117816] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.117817] ACPI: Added _OSI(Processor Aggregator Device)
[    0.119689] ACPI: Executed 1 blocks of module-level executable AML code
[    0.132395] ACPI: Dynamic OEM Table Load:
[    0.132400] ACPI: SSDT 0xFFFF880119C23000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.141685] ACPI: Dynamic OEM Table Load:
[    0.141688] ACPI: SSDT 0xFFFF880119C33400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.153621] ACPI: Dynamic OEM Table Load:
[    0.153625] ACPI: SSDT 0xFFFF88011A23CC00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.164218] ACPI: Interpreter enabled
[    0.164222] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.164225] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.164235] ACPI: (supports S0 S3 S4 S5)
[    0.164236] ACPI: Using IOAPIC for interrupt routing
[    0.164255] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.169035] ACPI: Power Resource [FN00] (off)
[    0.169096] ACPI: Power Resource [FN01] (off)
[    0.169154] ACPI: Power Resource [FN02] (off)
[    0.169212] ACPI: Power Resource [FN03] (off)
[    0.169270] ACPI: Power Resource [FN04] (off)
[    0.169673] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.169677] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.169768] \_SB_.PCI0:_OSC invalid UUID
[    0.169768] _OSC request data:1 1f 0
[    0.169771] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.170265] PCI host bridge to bus 0000:00
[    0.170267] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.170269] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.170270] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.170271] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.170272] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.170273] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.170275] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.170276] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.170277] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.170278] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.170279] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.170280] pci_bus 0000:00: root bus resource [mem 0x11f600000-0xfffffffff]
[    0.170286] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.170357] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
[    0.170365] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.170370] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.170373] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.170459] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.170481] pci 0000:00:16.0: reg 0x10: [mem 0xf7d09000-0xf7d0900f 64bit]
[    0.170550] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.170623] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.170642] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d07000-0xf7d073ff]
[    0.170726] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.170774] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.170808] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.170823] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit]
[    0.170893] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.170929] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.170960] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.171038] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.171076] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.171107] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.171184] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.171222] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.171254] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.171330] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.171369] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.171405] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.171424] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d06000-0xf7d063ff]
[    0.171508] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.171553] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.171587] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.171740] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
[    0.171754] pci 0000:00:1f.2: reg 0x10: [io  0xf110-0xf117]
[    0.171760] pci 0000:00:1f.2: reg 0x14: [io  0xf100-0xf103]
[    0.171767] pci 0000:00:1f.2: reg 0x18: [io  0xf0f0-0xf0f7]
[    0.171774] pci 0000:00:1f.2: reg 0x1c: [io  0xf0e0-0xf0e3]
[    0.171781] pci 0000:00:1f.2: reg 0x20: [io  0xf0d0-0xf0df]
[    0.171788] pci 0000:00:1f.2: reg 0x24: [io  0xf0c0-0xf0cf]
[    0.171869] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.171883] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d05000-0xf7d050ff 64bit]
[    0.171901] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.171972] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[    0.171985] pci 0000:00:1f.5: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.171992] pci 0000:00:1f.5: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.171999] pci 0000:00:1f.5: reg 0x18: [io  0xf090-0xf097]
[    0.172006] pci 0000:00:1f.5: reg 0x1c: [io  0xf080-0xf083]
[    0.172012] pci 0000:00:1f.5: reg 0x20: [io  0xf070-0xf07f]
[    0.172019] pci 0000:00:1f.5: reg 0x24: [io  0xf060-0xf06f]
[    0.172154] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.172246] pci 0000:02:00.0: [10ec:8176] type 00 class 0x028000
[    0.172278] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.172321] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c03fff 64bit]
[    0.172496] pci 0000:02:00.0: supports D1 D2
[    0.172497] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.172536] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.180149] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.180155] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.180159] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.180260] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.180282] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.180314] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.180334] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.180440] pci 0000:03:00.0: supports D1 D2
[    0.180441] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.180475] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.188155] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.188160] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.188170] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.188568] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.188604] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.188639] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.188674] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.188708] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.188743] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.188778] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.188812] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.188979] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.189051] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.189053] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.189055] vgaarb: loaded
[    0.189056] vgaarb: bridge control possible 0000:00:02.0
[    0.189099] PCI: Using ACPI for IRQ routing
[    0.190530] PCI: pci_cache_line_size set to 64 bytes
[    0.190569] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.190570] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.190571] e820: reserve RAM buffer [mem 0xd5cca000-0xd7ffffff]
[    0.190573] e820: reserve RAM buffer [mem 0xd6dc6000-0xd7ffffff]
[    0.190574] e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff]
[    0.190575] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[    0.190676] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.190679] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.192692] amd_nb: Cannot enumerate AMD northbridges
[    0.192701] Switched to clocksource hpet
[    0.196281] pnp: PnP ACPI init
[    0.196291] ACPI: bus type PNP registered
[    0.196351] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.196354] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.196408] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.196409] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.196410] system 00:01: [io  0xffff] has been reserved
[    0.196412] system 00:01: [io  0xffff] has been reserved
[    0.196413] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.196414] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.196416] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.196417] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.196419] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.196442] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.196476] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.196478] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.196569] system 00:04: [io  0x0a20-0x0a3f] has been reserved
[    0.196570] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.196572] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.196573] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.196624] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.196626] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.196810] pnp 00:06: [dma 0 disabled]
[    0.196848] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.197001] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.197003] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.197004] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.197006] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.197007] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.197009] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.197010] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.197011] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.197013] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.197014] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.197016] system 00:07: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    0.197017] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.197122] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[    0.197123] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[    0.197125] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.197138] pnp: PnP ACPI: found 9 devices
[    0.197139] ACPI: bus type PNP unregistered
[    0.203132] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.203135] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.203136] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[    0.203152] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.203153] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.203154] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.203159] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
[    0.203163] pci 0000:00:1c.0: BAR 15: assigned [mem 0x11f600000-0x11f7fffff 64bit pref]
[    0.203165] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.203166] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.203169] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.203173] pci 0000:00:1c.0:   bridge window [mem 0xdfb00000-0xdfcfffff]
[    0.203177] pci 0000:00:1c.0:   bridge window [mem 0x11f600000-0x11f7fffff 64bit pref]
[    0.203182] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.203184] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.203188] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.203196] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.203198] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.203204] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.203210] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.203211] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.203212] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.203213] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.203214] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.203215] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.203216] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.203217] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.203219] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.203220] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[    0.203221] pci_bus 0000:00: resource 14 [mem 0x11f600000-0xfffffffff]
[    0.203222] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.203223] pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfcfffff]
[    0.203224] pci_bus 0000:01: resource 2 [mem 0x11f600000-0x11f7fffff 64bit pref]
[    0.203226] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.203227] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.203228] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.203229] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.203276] NET: Registered protocol family 2
[    0.203451] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.203525] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.203628] TCP: Hash tables configured (established 32768 bind 32768)
[    0.203644] TCP: reno registered
[    0.203649] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.203667] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.203722] NET: Registered protocol family 1
[    0.203743] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.203754] pci 0000:00:02.0: Video device with shadowed ROM
[    0.244865] PCI: CLS 64 bytes, default 64
[    0.244906] Unpacking initramfs...
[    0.449893] Freeing initrd memory: 15788K (ffff880036119000 - ffff880037084000)
[    0.449966] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.449968] software IO TLB [mem 0xd1cca000-0xd5cca000] (64MB) mapped at [ffff8800d1cca000-ffff8800d5cc9fff]
[    0.450114] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.450152] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1c
[    0.450158] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1c
[    0.450162] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1c
[    0.450168] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1c
[    0.450213] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.450426] audit: initializing netlink subsys (disabled)
[    0.450440] audit: type=2000 audit(1522675285.448:1): initialized
[    0.450730] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.450748] zbud: loaded
[    0.450899] VFS: Disk quotas dquot_6.5.2
[    0.450913] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.450955] msgmni has been set to 7592
[    0.451202] alg: No test for stdrng (krng)
[    0.451225] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.451263] io scheduler noop registered
[    0.451265] io scheduler deadline registered
[    0.451295] io scheduler cfq registered (default)
[    0.451675] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.451687] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.451703] intel_idle: MWAIT substates: 0x1120
[    0.451704] intel_idle: v0.4 model 0x3A
[    0.451705] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.451832] GHES: HEST is not enabled!
[    0.451882] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.472320] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.472710] Linux agpgart interface v0.103
[    0.472787] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.725273] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.725403] mousedev: PS/2 mouse device common for all mice
[    0.725439] rtc_cmos 00:02: RTC can wake from S4
[    0.725579] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.725604] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.725613] Intel P-state driver initializing.
[    0.725620] Intel pstate controlling: cpu 0
[    0.725637] Intel pstate controlling: cpu 1
[    0.725674] Intel pstate controlling: cpu 2
[    0.725747] Intel pstate controlling: cpu 3
[    0.725786] ledtrig-cpu: registered to indicate activity on CPUs
[    0.726264] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.726265] AMD IOMMUv2 functionality not available on this system
[    0.726387] TCP: cubic registered
[    0.726603] NET: Registered protocol family 10
[    0.726916] mip6: Mobile IPv6
[    0.726922] NET: Registered protocol family 17
[    0.726932] mpls_gso: MPLS GSO support
[    0.727373] registered taskstats version 1
[    0.727881] rtc_cmos 00:02: setting system clock to 2018-04-02 13:21:25 UTC (1522675285)
[    0.728004] PM: Hibernation image not present or could not be loaded.
[    0.728994] Freeing unused kernel memory: 1208K (ffffffff818ef000 - ffffffff81a1d000)
[    0.728997] Write protecting the kernel read-only data: 8192k
[    0.729404] Freeing unused kernel memory: 840K (ffff88000152e000 - ffff880001600000)
[    0.730076] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[    0.747770] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.747863] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.747879] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.748931] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.748994] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.749320] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.749388] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.749454] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.749520] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.749583] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.777429] ACPI: Fan [FAN0] (off)
[    0.779635] ACPI: bus type USB registered
[    0.779676] usbcore: registered new interface driver usbfs
[    0.779689] usbcore: registered new interface driver hub
[    0.779774] usbcore: registered new device driver usb
[    0.780333] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.780343] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.780388] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.780605] ehci-pci: EHCI PCI platform driver
[    0.781365] SCSI subsystem initialized
[    0.782582] libata version 3.00 loaded.
[    0.813577] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.813586] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.813619] ehci-pci 0000:00:1a.0: debug port 2
[    0.813650] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.813840] thermal LNXTHERM:00: registered as thermal_zone0
[    0.813843] ACPI: Thermal Zone [TZ00] (28 C)
[    0.813868] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000676000, ec:a8:6b:84:a0:ae, XID 0c900800 IRQ 42
[    0.813871] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.814047] thermal LNXTHERM:01: registered as thermal_zone1
[    0.814048] ACPI: Thermal Zone [TZ01] (30 C)
[    0.814148] ACPI: Fan [FAN1] (off)
[    0.814189] ACPI: Fan [FAN2] (off)
[    0.814225] ACPI: Fan [FAN3] (off)
[    0.814258] ACPI: Fan [FAN4] (off)
[    0.817533] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.817569] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d07000
[    0.829267] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.829588] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.829591] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.829593] usb usb1: Product: EHCI Host Controller
[    0.829594] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.829604] usb usb1: SerialNumber: 0000:00:1a.0
[    0.829795] hub 1-0:1.0: USB hub found
[    0.829815] hub 1-0:1.0: 2 ports detected
[    0.830178] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.830185] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.830197] ehci-pci 0000:00:1d.0: debug port 2
[    0.834087] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.834139] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d06000
[    0.845378] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.845424] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.845427] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.845428] usb usb2: Product: EHCI Host Controller
[    0.845429] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.845431] usb usb2: SerialNumber: 0000:00:1d.0
[    0.845620] hub 2-0:1.0: USB hub found
[    0.845628] hub 2-0:1.0: 2 ports detected
[    0.845774] ata_piix 0000:00:1f.2: version 2.13
[    0.845865] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.002074] scsi0 : ata_piix
[    1.002452] scsi1 : ata_piix
[    1.002530] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
[    1.002536] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
[    1.002648] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.003064] scsi2 : ata_piix
[    1.003392] scsi3 : ata_piix
[    1.003469] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[    1.003473] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[    1.003620] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
[    1.003626] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.141571] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.274048] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.274053] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.274456] hub 1-1:1.0: USB hub found
[    1.274628] hub 1-1:1.0: 4 ports detected
[    1.332903] ata4: SATA link down (SStatus 0 SControl 330)
[    1.344096] ata3: SATA link down (SStatus 0 SControl 330)
[    1.385790] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.449842] tsc: Refined TSC clocksource calibration: 3192.747 MHz
[    1.518262] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.518267] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.518674] hub 2-1:1.0: USB hub found
[    1.518871] hub 2-1:1.0: 6 ports detected
[    1.589966] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    1.693553] usb 1-1.1: New USB device found, idVendor=1c4f, idProduct=0002
[    1.693557] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.693560] usb 1-1.1: Product: USB Keykoard
[    1.693562] usb 1-1.1: Manufacturer: USB
[    1.695499] hidraw: raw HID events driver (C) Jiri Kosina
[    1.700619] usbcore: registered new interface driver usbhid
[    1.700622] usbhid: USB HID core driver
[    1.701535] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1C4F:0002.0001/input/input1
[    1.701678] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.1/input0
[    1.701854] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1C4F:0002.0002/input/input2
[    1.702018] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.1/input1
[    1.766096] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    1.988549] usb 1-1.3: New USB device found, idVendor=058f, idProduct=3832
[    1.988553] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.988556] usb 1-1.3: Product: USB 2.0 PC Camera
[    1.988558] usb 1-1.3: Manufacturer: Alcor Micro, Corp.
[    2.066352] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    2.160420] usb 2-1.1: New USB device found, idVendor=12d1, idProduct=1052
[    2.160425] usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    2.160427] usb 2-1.1: Product: U9200
[    2.160429] usb 2-1.1: Manufacturer: HUAWEI
[    2.160431] usb 2-1.1: SerialNumber: 313A000200000001
[    2.230492] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
[    2.328186] usb 2-1.2: New USB device found, idVendor=09da, idProduct=000a
[    2.328190] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.328192] usb 2-1.2: Product: USB Mouse
[    2.328194] usb 2-1.2: Manufacturer: A4Tech
[    2.350592] ata2.01: failed to resume link (SControl 0)
[    2.350667] ata1.01: failed to resume link (SControl 0)
[    2.450867] Switched to clocksource tsc
[    2.506761] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[    2.506777] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.506790] ata1.01: link offline, clearing class 3 to NONE
[    2.506939] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[    2.506954] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.515134] ata2.00: ATA-8: WDC WD5000BPVT-60HXZT3, 01.01A01, max UDMA/133
[    2.515138] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.515221] ata1.00: ATAPI: HL-DT-ST DVDRAM GT60N, 1.00, max UDMA/133
[    2.531154] ata1.00: configured for UDMA/133
[    2.531226] ata2.00: configured for UDMA/133
[    2.536723] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT60N     1.00 PQ: 0 ANSI: 5
[    2.544699] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-6 1A01 PQ: 0 ANSI: 5
[    2.555435] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.555438] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.555650] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.555833] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.555837] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    2.555870] sd 1:0:0:0: [sda] Write Protect is off
[    2.555872] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.555888] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.614761]  sda: sda1 sda3 < sda5 sda6 sda7 >
[    2.615601] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.268488] PM: Starting manual resume from disk
[    3.268494] PM: Hibernation image partition 8:6 present
[    3.268496] PM: Looking for hibernation image.
[    3.268908] PM: Image not found (code -22)
[    3.268911] PM: Hibernation image not present or could not be loaded.
[    3.420070] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.138065] random: nonblocking pool is initialized
[    4.719841] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.828462] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.828608] systemd[1]: Detected architecture x86-64.
[    4.837904] systemd[1]: Set hostname to <dron>.
[    5.750229] systemd[1]: rsync.service: Cannot add dependency job, ignoring: Unit rsync.service is masked.
[    5.750268] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
[    5.751085] systemd[1]: Listening on Journal Audit Socket.
[    5.751152] systemd[1]: Reached target User and Group Name Lookups.
[    5.751322] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.751387] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.751431] systemd[1]: Listening on udev Kernel Socket.
[    5.751571] systemd[1]: Created slice System Slice.
[    5.751704] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.751761] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.751803] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.751848] systemd[1]: Listening on Syslog Socket.
[    5.751914] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.752413] systemd[1]: Mounting POSIX Message Queue File System...
[    5.752551] systemd[1]: Created slice system-getty.slice.
[    5.752615] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.752641] systemd[1]: Reached target Encrypted Volumes.
[    5.752665] systemd[1]: Reached target Remote File Systems.
[    5.752727] systemd[1]: Listening on udev Control Socket.
[    5.753200] systemd[1]: Mounting Debug File System...
[    5.753797] systemd[1]: Mounting Huge Pages File System...
[    5.753878] systemd[1]: Listening on Journal Socket.
[    5.863915] systemd[1]: Starting Set the console keyboard layout...
[    5.864452] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.864956] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.865463] systemd[1]: Starting Journal Service...
[    5.909731] systemd[1]: Starting Load Kernel Modules...
[    5.909875] systemd[1]: Created slice User and Session Slice.
[    5.909917] systemd[1]: Reached target Slices.
[    5.964078] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.964887] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.082177] systemd[1]: Started Journal Service.
[    6.211013] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.438919] systemd-journald[178]: Received request to flush runtime journal from PID 1
[    7.187507] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    7.187514] ACPI: Power Button [PWRB]
[    7.187560] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.187563] ACPI: Power Button [PWRF]
[    7.221377] EDAC MC: Ver: 3.0.0
[    7.316810] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[    7.340959] EDAC ie31200: No ECC support
[    7.427462] [drm] Initialized drm 1.1.0 20060810
[    7.468575] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    7.619673] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.761050] AVX version of gcm_enc/dec engaged.
[    7.762469] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    7.824627] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20140424/utaddress-254)
[    7.824632] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.824635] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[    7.824638] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.824639] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[    7.824641] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.824642] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[    7.824644] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.824645] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.862710] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    7.862802] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    7.913797] [drm] Memory usable by graphics device = 2048M
[    7.913801] [drm] Replacing VGA console driver
[    7.914798] Console: switching to colour dummy device 80x25
[    7.939404] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    7.939419] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.939421] [drm] Driver supports precise vblank timestamp query.
[    7.939505] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.951480] [drm] Wrong MCH_SSKPD value: 0x20100406
[    7.951483] [drm] This can cause pipe underruns and display issues.
[    7.951484] [drm] Please upgrade your BIOS to fix this.
[    8.023373] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    8.095065] fbcon: inteldrmfb (fb0) is primary device
[    8.142371] Console: switching to colour frame buffer device 240x67
[    8.146490] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.146492] i915 0000:00:02.0: registered panic notifier
[    8.179228] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.179488] acpi device:4c: registered as cooling_device9
[    8.179583] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    8.179635] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.180124] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    8.294464] alg: No test for crc32 (crc32-pclmul)
[    8.325840] iTCO_vendor_support: vendor-support=0
[    8.370237] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.370271] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    8.370463] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.424999] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    8.425003] sound hdaudioC0D0:    speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    8.425005] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    8.425007] sound hdaudioC0D0:    mono: mono_out=0x0
[    8.425008] sound hdaudioC0D0:    inputs:
[    8.425011] sound hdaudioC0D0:      Front Mic=0x19
[    8.425013] sound hdaudioC0D0:      Rear Mic=0x18
[    8.461636] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    8.461701] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.461761] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.461817] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.461873] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.665654] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:09DA:000A.0003/input/input12
[    8.665923] a4tech 0003:09DA:000A.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-1.2/input0
[    9.007657] cfg80211: Calling CRDA to update world regulatory domain
[    9.318598] media: Linux media interface: v0.10
[    9.339412] Linux video capture interface: v2.00
[    9.506516] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[    9.554456] rtl8192ce 0000:02:00.0: firmware: direct-loading firmware rtlwifi/rtl8192cfw.bin
[    9.789317] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    9.941602] usbcore: registered new interface driver snd-usb-audio
[   10.007362] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (058f:3832)
[   10.012783] input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[   10.012852] usbcore: registered new interface driver uvcvideo
[   10.012854] USB Video Class driver (1.1.1)
[   10.195666] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   10.195894] rtlwifi: wireless switch is on
[   10.257817] intel_rapl: Found RAPL domain package
[   10.257823] intel_rapl: Found RAPL domain core
[   10.257835] intel_rapl: Found RAPL domain uncore
[   10.685004] Adding 5858300k swap on /dev/sda6.  Priority:-1 extents:1 across:5858300k FS
[   11.263123] cfg80211: World regulatory domain updated:
[   11.263127] cfg80211:  DFS Master region: unset
[   11.263129] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.263132] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.263135] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   11.263137] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   11.263139] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   11.263142] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   11.263144] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   11.263146] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   11.263148] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   12.499493] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   17.293507] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   17.401468] r8169 0000:03:00.0 enp3s0: link down
[   17.401487] r8169 0000:03:00.0 enp3s0: link down
[   17.401528] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   17.769938] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.118983] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   19.514347] r8169 0000:03:00.0 enp3s0: link up
[   19.514359] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready

[  361.144275] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready

dronnet
 
Posts: 17
Joined: 2018-03-30 11:26

Re: monoblock monitor does not work

Postby dronnet » 2018-04-02 12:43

without monitor HDMI-1

Code: Select all
dron@dron:~$ lspci -k                                                                                                                                   
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)                                                   
        Subsystem: Elitegroup Computer Systems Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
        Kernel modules: ie31200_edac
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
        Subsystem: Elitegroup Computer Systems Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
        Kernel driver in use: i915
        Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family MEI Controller
        Kernel driver in use: mei_me
        Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family High Definition Audio Controller
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05)
        Subsystem: Elitegroup Computer Systems H61 Express Chipset Family LPC Controller
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich
00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller
        Kernel driver in use: ata_piix
        Kernel modules: ata_piix, ata_generic
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family SMBus Controller
        Kernel modules: i2c_i801
00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller
        Kernel driver in use: ata_piix
        Kernel modules: ata_piix, ata_generic
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
        Subsystem: AzureWave AW-NE139H Half-size Mini PCIe Card
        Kernel driver in use: rtl8192ce
        Kernel modules: rtl8192ce
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
        Subsystem: Elitegroup Computer Systems RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
        Kernel driver in use: r8169
        Kernel modules: r8169
dron@dron:~$

dronnet
 
Posts: 17
Joined: 2018-03-30 11:26

Re: monoblock monitor does not work

Postby dronnet » 2018-04-02 12:49

Both monitors are connected, the main one is on HDMI-1, second DP-2
Code: Select all
dron@dron:~$ dmesg -w
[    0.000000] CPU0 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.51-2 (2017-12-03)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=ec6cf26f-5d8d-464a-a43f-d506abc11d19 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:

Removed the log,"Your message contains 60139 characters. The maximum number of allowed characters is 60000"

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ECS H61H-G11/H61H-G11, BIOS 4.6.5 05/22/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable                                                                                                               
[    0.000000] MTRR fixed ranges enabled:                                                                                                                 
[    0.000000]   00000-9FFFF write-back                                                                                                                   
[    0.000000]   A0000-BFFFF uncachable                                                                                                                   
[    0.000000]   C0000-CFFFF write-protect                                                                                                                 
[    0.000000]   D0000-E7FFF uncachable                                                                                                                   
[    0.000000]   E8000-FFFFF write-protect                                                                                                                 
[    0.000000] MTRR variable ranges enabled:                                                                                                               
[    0.000000]   0 base 000000000 mask F00000000 write-back                                                                                               
[    0.000000]   1 base 100000000 mask FE0000000 write-back                                                                                               
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable                                                                                               
[    0.000000]   3 base 0D8000000 mask FF8000000 uncachable                                                                                               
[    0.000000]   4 base 0D7800000 mask FFF800000 uncachable                                                                                               
[    0.000000]   5 base 11F800000 mask FFF800000 uncachable                                                                                               
[    0.000000]   6 base 11F600000 mask FFFE00000 uncachable                                                                                               
[    0.000000]   7 disabled                                                                                                                               
[    0.000000]   8 disabled                                                                                                                               
[    0.000000]   9 disabled                                                                                                                               
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106                                                                           
[    0.000000] e820: update [mem 0xd7800000-0xffffffff] usable ==> reserved                                                                               
[    0.000000] e820: last_pfn = 0xd7000 max_arch_pfn = 0x400000000                                                                                         
[    0.000000] found SMP MP-table at [mem 0x000fccb0-0x000fccbf] mapped at [ffff8800000fccb0]                                                             
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576                                                                               
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11f400000-0x11f5fffff]
[    0.000000]  [mem 0x11f400000-0x11f5fffff] page 2M
[    0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11f3fffff]
[    0.000000]  [mem 0x11c000000-0x11f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01afa000, 0x01afafff] PGTABLE
[    0.000000] BRK [0x01afb000, 0x01afbfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xd5cc9fff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xd5bfffff] page 2M
[    0.000000]  [mem 0xd5c00000-0xd5cc9fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xd6588000-0xd6dc5fff]
[    0.000000]  [mem 0xd6588000-0xd65fffff] page 4k
[    0.000000]  [mem 0xd6600000-0xd6bfffff] page 2M
[    0.000000]  [mem 0xd6c00000-0xd6dc5fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xd6ff3000-0xd6ffffff]
[    0.000000]  [mem 0xd6ff3000-0xd6ffffff] page 4k
[    0.000000] RAMDISK: [mem 0x36119000-0x37083fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000D6523070 000064 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D652C898 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000D6523168 00972B (v02 ALASKA A M I    00000015 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000D653EF80 000040
[    0.000000] ACPI: APIC 0x00000000D652C990 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000D652CA08 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000D652CA48 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000D652CA80 000460 (v01 IdeRef IdeTable 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000D652CEE0 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000D652D890 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000D652E328 0000B0 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11f5fffff]
[    0.000000]   NODE_DATA [mem 0x11f5f5000-0x11f5f9fff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xd5cc9fff]
[    0.000000]   node   0: [mem 0xd6588000-0xd6dc5fff]
[    0.000000]   node   0: [mem 0xd6ff3000-0xd6ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11f5fffff]
[    0.000000] On node 0 totalpages: 1005745
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11939 pages used for memmap
[    0.000000]   DMA32 zone: 873236 pages, LIFO batch:31
[    0.000000]   Normal zone: 1757 pages used for memmap
[    0.000000]   Normal zone: 128512 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xd7a00000-0xdf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd5cca000-0xd62bffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd62c0000-0xd6522fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6523000-0xd652efff]
[    0.000000] PM: Registered nosave memory: [mem 0xd652f000-0xd653ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6540000-0xd6544fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6545000-0xd6587fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6dc6000-0xd6ff2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7000000-0xd77fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011f200000 s81664 r8192 d20736 u524288
[    0.000000] pcpu-alloc: s81664 r8192 d20736 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 991972
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=ec6cf26f-5d8d-464a-a43f-d506abc11d19 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3871736K/4022980K available (5291K kernel code, 949K rwdata, 1836K rodata, 1208K init, 840K bss, 151244K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3192.997 MHz processor
[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.99 BogoMIPS (lpj=12771988)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000033] ACPI: Core revision 20140424
[    0.005118] ACPI: All ACPI Tables successfully acquired
[    0.005139] Security Framework initialized
[    0.005146] AppArmor: AppArmor disabled by boot time parameter
[    0.005147] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.005334] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.006302] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.006745] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006749] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006941] Initializing cgroup subsys memory
[    0.006945] Initializing cgroup subsys devices
[    0.006950] Initializing cgroup subsys freezer
[    0.006952] Initializing cgroup subsys net_cls
[    0.006956] Initializing cgroup subsys blkio
[    0.006959] Initializing cgroup subsys perf_event
[    0.006960] Initializing cgroup subsys net_prio
[    0.006980] CPU: Physical Processor ID: 0
[    0.006981] CPU: Processor Core ID: 0
[    0.006985] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
               ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.007263] mce: CPU supports 9 MCE banks
[    0.007273] CPU0: Thermal monitoring enabled (TM1)
[    0.007278] process: using mwait in idle threads
[    0.007281] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
               Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
               tlb_flushall_shift: 2
[    0.007371] Freeing SMP alternatives memory: 20K (ffffffff81a1d000 - ffffffff81a22000)
[    0.008429] ftrace: allocating 21712 entries in 85 pages
[    0.015690] dmar: Host address width 36
[    0.015691] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.015698] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.015699] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[    0.015703] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.015704] dmar: RMRR base: 0x000000d6243000 end: 0x000000d6253fff
[    0.015705] dmar: RMRR base: 0x000000d7800000 end: 0x000000df9fffff
[    0.015774] IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.015775] HPET id 0 under DRHD base 0xfed91000
[    0.015776] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.015928] Enabled IRQ remapping in x2apic mode
[    0.015929] Enabling x2apic
[    0.015930] Enabled x2apic
[    0.015934] Switched APIC routing to cluster x2apic.
[    0.016362] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056082] smpboot: CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (fam: 06, model: 3a, stepping: 09)
[    0.056088] TSC deadline timer enabled
[    0.056103] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.056118] ... version:                3
[    0.056119] ... bit width:              48
[    0.056119] ... generic registers:      8
[    0.056120] ... value mask:             0000ffffffffffff
[    0.056121] ... max period:             00007fffffffffff
[    0.056121] ... fixed-purpose events:   3
[    0.056122] ... event mask:             00000007000000ff
[    0.057172] x86: Booting SMP configuration:
[    0.057173] .... node  #0, CPUs:      #1
[    0.067841] CPU1 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.070565] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.070646]  #2
[    0.081074] CPU2 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.084076]  #3
[    0.094495] CPU3 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.097434] x86: Booted up 1 node, 4 CPUs
[    0.097436] smpboot: Total of 4 processors activated (25543.97 BogoMIPS)
[    0.099784] devtmpfs: initialized
[    0.101839] PM: Registering ACPI NVS region [mem 0xd62c0000-0xd6522fff] (2502656 bytes)
[    0.101876] PM: Registering ACPI NVS region [mem 0xd652f000-0xd653ffff] (69632 bytes)
[    0.101878] PM: Registering ACPI NVS region [mem 0xd6545000-0xd6587fff] (274432 bytes)
[    0.101938] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.102551] pinctrl core: initialized pinctrl subsystem
[    0.102606] NET: Registered protocol family 16
[    0.102694] cpuidle: using governor ladder
[    0.102696] cpuidle: using governor menu
[    0.102726] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.102727] ACPI: bus type PCI registered
[    0.102728] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.102789] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.102791] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.102855] PCI: Using configuration type 1 for base access
[    0.117813] ACPI: Added _OSI(Module Device)
[    0.117815] ACPI: Added _OSI(Processor Device)
[    0.117816] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.117817] ACPI: Added _OSI(Processor Aggregator Device)
[    0.119689] ACPI: Executed 1 blocks of module-level executable AML code
[    0.132395] ACPI: Dynamic OEM Table Load:
[    0.132400] ACPI: SSDT 0xFFFF880119C23000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.141685] ACPI: Dynamic OEM Table Load:
[    0.141688] ACPI: SSDT 0xFFFF880119C33400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.153621] ACPI: Dynamic OEM Table Load:
[    0.153625] ACPI: SSDT 0xFFFF88011A23CC00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.164218] ACPI: Interpreter enabled
[    0.164222] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.164225] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.164235] ACPI: (supports S0 S3 S4 S5)
[    0.164236] ACPI: Using IOAPIC for interrupt routing
[    0.164255] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.169035] ACPI: Power Resource [FN00] (off)
[    0.169096] ACPI: Power Resource [FN01] (off)
[    0.169154] ACPI: Power Resource [FN02] (off)
[    0.169212] ACPI: Power Resource [FN03] (off)
[    0.169270] ACPI: Power Resource [FN04] (off)
[    0.169673] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.169677] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.169768] \_SB_.PCI0:_OSC invalid UUID
[    0.169768] _OSC request data:1 1f 0
[    0.169771] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.170265] PCI host bridge to bus 0000:00
[    0.170267] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.170269] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.170270] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.170271] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.170272] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.170273] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.170275] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.170276] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.170277] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.170278] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.170279] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.170280] pci_bus 0000:00: root bus resource [mem 0x11f600000-0xfffffffff]
[    0.170286] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.170357] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
[    0.170365] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.170370] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.170373] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.170459] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.170481] pci 0000:00:16.0: reg 0x10: [mem 0xf7d09000-0xf7d0900f 64bit]
[    0.170550] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.170623] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.170642] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d07000-0xf7d073ff]
[    0.170726] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.170774] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.170808] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.170823] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit]
[    0.170893] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.170929] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.170960] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.171038] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.171076] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.171107] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.171184] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.171222] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.171254] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.171330] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.171369] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.171405] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.171424] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d06000-0xf7d063ff]
[    0.171508] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.171553] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.171587] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.171740] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
[    0.171754] pci 0000:00:1f.2: reg 0x10: [io  0xf110-0xf117]
[    0.171760] pci 0000:00:1f.2: reg 0x14: [io  0xf100-0xf103]
[    0.171767] pci 0000:00:1f.2: reg 0x18: [io  0xf0f0-0xf0f7]
[    0.171774] pci 0000:00:1f.2: reg 0x1c: [io  0xf0e0-0xf0e3]
[    0.171781] pci 0000:00:1f.2: reg 0x20: [io  0xf0d0-0xf0df]
[    0.171788] pci 0000:00:1f.2: reg 0x24: [io  0xf0c0-0xf0cf]
[    0.171869] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.171883] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d05000-0xf7d050ff 64bit]
[    0.171901] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.171972] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[    0.171985] pci 0000:00:1f.5: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.171992] pci 0000:00:1f.5: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.171999] pci 0000:00:1f.5: reg 0x18: [io  0xf090-0xf097]
[    0.172006] pci 0000:00:1f.5: reg 0x1c: [io  0xf080-0xf083]
[    0.172012] pci 0000:00:1f.5: reg 0x20: [io  0xf070-0xf07f]
[    0.172019] pci 0000:00:1f.5: reg 0x24: [io  0xf060-0xf06f]
[    0.172154] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.172246] pci 0000:02:00.0: [10ec:8176] type 00 class 0x028000
[    0.172278] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.172321] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c03fff 64bit]
[    0.172496] pci 0000:02:00.0: supports D1 D2
[    0.172497] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.172536] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.180149] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.180155] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.180159] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.180260] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.180282] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.180314] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.180334] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.180440] pci 0000:03:00.0: supports D1 D2
[    0.180441] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.180475] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.188155] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.188160] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.188170] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.188568] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.188604] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.188639] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.188674] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.188708] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.188743] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.188778] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.188812] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.188979] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.189051] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.189053] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.189055] vgaarb: loaded
[    0.189056] vgaarb: bridge control possible 0000:00:02.0
[    0.189099] PCI: Using ACPI for IRQ routing
[    0.190530] PCI: pci_cache_line_size set to 64 bytes
[    0.190569] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.190570] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.190571] e820: reserve RAM buffer [mem 0xd5cca000-0xd7ffffff]
[    0.190573] e820: reserve RAM buffer [mem 0xd6dc6000-0xd7ffffff]
[    0.190574] e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff]
[    0.190575] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[    0.190676] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.190679] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.192692] amd_nb: Cannot enumerate AMD northbridges
[    0.192701] Switched to clocksource hpet
[    0.196281] pnp: PnP ACPI init
[    0.196291] ACPI: bus type PNP registered
[    0.196351] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.196354] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.196408] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.196409] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.196410] system 00:01: [io  0xffff] has been reserved
[    0.196412] system 00:01: [io  0xffff] has been reserved
[    0.196413] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.196414] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.196416] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.196417] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.196419] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.196442] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.196476] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.196478] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.196569] system 00:04: [io  0x0a20-0x0a3f] has been reserved
[    0.196570] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.196572] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.196573] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.196624] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.196626] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.196810] pnp 00:06: [dma 0 disabled]
[    0.196848] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.197001] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.197003] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.197004] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.197006] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.197007] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.197009] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.197010] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.197011] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.197013] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.197014] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.197016] system 00:07: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    0.197017] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.197122] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[    0.197123] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[    0.197125] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.197138] pnp: PnP ACPI: found 9 devices
[    0.197139] ACPI: bus type PNP unregistered
[    0.203132] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.203135] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.203136] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[    0.203152] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.203153] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.203154] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.203159] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
[    0.203163] pci 0000:00:1c.0: BAR 15: assigned [mem 0x11f600000-0x11f7fffff 64bit pref]
[    0.203165] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.203166] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.203169] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.203173] pci 0000:00:1c.0:   bridge window [mem 0xdfb00000-0xdfcfffff]
[    0.203177] pci 0000:00:1c.0:   bridge window [mem 0x11f600000-0x11f7fffff 64bit pref]
[    0.203182] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.203184] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.203188] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.203196] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.203198] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.203204] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.203210] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.203211] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.203212] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.203213] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.203214] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.203215] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.203216] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.203217] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.203219] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.203220] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[    0.203221] pci_bus 0000:00: resource 14 [mem 0x11f600000-0xfffffffff]
[    0.203222] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.203223] pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfcfffff]
[    0.203224] pci_bus 0000:01: resource 2 [mem 0x11f600000-0x11f7fffff 64bit pref]
[    0.203226] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.203227] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.203228] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.203229] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.203276] NET: Registered protocol family 2
[    0.203451] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.203525] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.203628] TCP: Hash tables configured (established 32768 bind 32768)
[    0.203644] TCP: reno registered
[    0.203649] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.203667] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.203722] NET: Registered protocol family 1
[    0.203743] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.203754] pci 0000:00:02.0: Video device with shadowed ROM
[    0.244865] PCI: CLS 64 bytes, default 64
[    0.244906] Unpacking initramfs...
[    0.449893] Freeing initrd memory: 15788K (ffff880036119000 - ffff880037084000)
[    0.449966] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.449968] software IO TLB [mem 0xd1cca000-0xd5cca000] (64MB) mapped at [ffff8800d1cca000-ffff8800d5cc9fff]
[    0.450114] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.450152] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1c
[    0.450158] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1c
[    0.450162] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1c
[    0.450168] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1c
[    0.450213] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.450426] audit: initializing netlink subsys (disabled)
[    0.450440] audit: type=2000 audit(1522675285.448:1): initialized
[    0.450730] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.450748] zbud: loaded
[    0.450899] VFS: Disk quotas dquot_6.5.2
[    0.450913] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.450955] msgmni has been set to 7592
[    0.451202] alg: No test for stdrng (krng)
[    0.451225] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.451263] io scheduler noop registered
[    0.451265] io scheduler deadline registered
[    0.451295] io scheduler cfq registered (default)
[    0.451675] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.451687] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.451703] intel_idle: MWAIT substates: 0x1120
[    0.451704] intel_idle: v0.4 model 0x3A
[    0.451705] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.451832] GHES: HEST is not enabled!
[    0.451882] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.472320] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.472710] Linux agpgart interface v0.103
[    0.472787] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.725273] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.725403] mousedev: PS/2 mouse device common for all mice
[    0.725439] rtc_cmos 00:02: RTC can wake from S4
[    0.725579] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.725604] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.725613] Intel P-state driver initializing.
[    0.725620] Intel pstate controlling: cpu 0
[    0.725637] Intel pstate controlling: cpu 1
[    0.725674] Intel pstate controlling: cpu 2
[    0.725747] Intel pstate controlling: cpu 3
[    0.725786] ledtrig-cpu: registered to indicate activity on CPUs
[    0.726264] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.726265] AMD IOMMUv2 functionality not available on this system
[    0.726387] TCP: cubic registered
[    0.726603] NET: Registered protocol family 10
[    0.726916] mip6: Mobile IPv6
[    0.726922] NET: Registered protocol family 17
[    0.726932] mpls_gso: MPLS GSO support
[    0.727373] registered taskstats version 1
[    0.727881] rtc_cmos 00:02: setting system clock to 2018-04-02 13:21:25 UTC (1522675285)
[    0.728004] PM: Hibernation image not present or could not be loaded.
[    0.728994] Freeing unused kernel memory: 1208K (ffffffff818ef000 - ffffffff81a1d000)
[    0.728997] Write protecting the kernel read-only data: 8192k
[    0.729404] Freeing unused kernel memory: 840K (ffff88000152e000 - ffff880001600000)
[    0.730076] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[    0.747770] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.747863] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.747879] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.748931] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.748994] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.749320] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.749388] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.749454] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.749520] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.749583] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.777429] ACPI: Fan [FAN0] (off)
[    0.779635] ACPI: bus type USB registered
[    0.779676] usbcore: registered new interface driver usbfs
[    0.779689] usbcore: registered new interface driver hub
[    0.779774] usbcore: registered new device driver usb
[    0.780333] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.780343] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.780388] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.780605] ehci-pci: EHCI PCI platform driver
[    0.781365] SCSI subsystem initialized
[    0.782582] libata version 3.00 loaded.
[    0.813577] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.813586] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.813619] ehci-pci 0000:00:1a.0: debug port 2
[    0.813650] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.813840] thermal LNXTHERM:00: registered as thermal_zone0
[    0.813843] ACPI: Thermal Zone [TZ00] (28 C)
[    0.813868] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000676000, ec:a8:6b:84:a0:ae, XID 0c900800 IRQ 42
[    0.813871] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.814047] thermal LNXTHERM:01: registered as thermal_zone1
[    0.814048] ACPI: Thermal Zone [TZ01] (30 C)
[    0.814148] ACPI: Fan [FAN1] (off)
[    0.814189] ACPI: Fan [FAN2] (off)
[    0.814225] ACPI: Fan [FAN3] (off)
[    0.814258] ACPI: Fan [FAN4] (off)
[    0.817533] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.817569] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d07000
[    0.829267] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.829588] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.829591] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.829593] usb usb1: Product: EHCI Host Controller
[    0.829594] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.829604] usb usb1: SerialNumber: 0000:00:1a.0
[    0.829795] hub 1-0:1.0: USB hub found
[    0.829815] hub 1-0:1.0: 2 ports detected
[    0.830178] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.830185] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.830197] ehci-pci 0000:00:1d.0: debug port 2
[    0.834087] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.834139] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d06000
[    0.845378] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.845424] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.845427] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.845428] usb usb2: Product: EHCI Host Controller
[    0.845429] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.845431] usb usb2: SerialNumber: 0000:00:1d.0
[    0.845620] hub 2-0:1.0: USB hub found
[    0.845628] hub 2-0:1.0: 2 ports detected
[    0.845774] ata_piix 0000:00:1f.2: version 2.13
[    0.845865] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.002074] scsi0 : ata_piix
[    1.002452] scsi1 : ata_piix
[    1.002530] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
[    1.002536] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
[    1.002648] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.003064] scsi2 : ata_piix
[    1.003392] scsi3 : ata_piix
[    1.003469] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[    1.003473] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[    1.003620] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
[    1.003626] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.141571] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.274048] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.274053] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.274456] hub 1-1:1.0: USB hub found
[    1.274628] hub 1-1:1.0: 4 ports detected
[    1.332903] ata4: SATA link down (SStatus 0 SControl 330)
[    1.344096] ata3: SATA link down (SStatus 0 SControl 330)
[    1.385790] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.449842] tsc: Refined TSC clocksource calibration: 3192.747 MHz
[    1.518262] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.518267] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.518674] hub 2-1:1.0: USB hub found
[    1.518871] hub 2-1:1.0: 6 ports detected
[    1.589966] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    1.693553] usb 1-1.1: New USB device found, idVendor=1c4f, idProduct=0002
[    1.693557] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.693560] usb 1-1.1: Product: USB Keykoard
[    1.693562] usb 1-1.1: Manufacturer: USB
[    1.695499] hidraw: raw HID events driver (C) Jiri Kosina
[    1.700619] usbcore: registered new interface driver usbhid
[    1.700622] usbhid: USB HID core driver
[    1.701535] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1C4F:0002.0001/input/input1
[    1.701678] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.1/input0
[    1.701854] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1C4F:0002.0002/input/input2
[    1.702018] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.1/input1
[    1.766096] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    1.988549] usb 1-1.3: New USB device found, idVendor=058f, idProduct=3832
[    1.988553] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.988556] usb 1-1.3: Product: USB 2.0 PC Camera
[    1.988558] usb 1-1.3: Manufacturer: Alcor Micro, Corp.
[    2.066352] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    2.160420] usb 2-1.1: New USB device found, idVendor=12d1, idProduct=1052
[    2.160425] usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    2.160427] usb 2-1.1: Product: U9200
[    2.160429] usb 2-1.1: Manufacturer: HUAWEI
[    2.160431] usb 2-1.1: SerialNumber: 313A000200000001
[    2.230492] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
[    2.328186] usb 2-1.2: New USB device found, idVendor=09da, idProduct=000a
[    2.328190] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.328192] usb 2-1.2: Product: USB Mouse
[    2.328194] usb 2-1.2: Manufacturer: A4Tech
[    2.350592] ata2.01: failed to resume link (SControl 0)
[    2.350667] ata1.01: failed to resume link (SControl 0)
[    2.450867] Switched to clocksource tsc
[    2.506761] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[    2.506777] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.506790] ata1.01: link offline, clearing class 3 to NONE
[    2.506939] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[    2.506954] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.515134] ata2.00: ATA-8: WDC WD5000BPVT-60HXZT3, 01.01A01, max UDMA/133
[    2.515138] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.515221] ata1.00: ATAPI: HL-DT-ST DVDRAM GT60N, 1.00, max UDMA/133
[    2.531154] ata1.00: configured for UDMA/133
[    2.531226] ata2.00: configured for UDMA/133
[    2.536723] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT60N     1.00 PQ: 0 ANSI: 5
[    2.544699] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-6 1A01 PQ: 0 ANSI: 5
[    2.555435] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.555438] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.555650] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.555833] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.555837] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    2.555870] sd 1:0:0:0: [sda] Write Protect is off
[    2.555872] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.555888] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.614761]  sda: sda1 sda3 < sda5 sda6 sda7 >
[    2.615601] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.268488] PM: Starting manual resume from disk
[    3.268494] PM: Hibernation image partition 8:6 present
[    3.268496] PM: Looking for hibernation image.
[    3.268908] PM: Image not found (code -22)
[    3.268911] PM: Hibernation image not present or could not be loaded.
[    3.420070] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.138065] random: nonblocking pool is initialized
[    4.719841] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.828462] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.828608] systemd[1]: Detected architecture x86-64.
[    4.837904] systemd[1]: Set hostname to <dron>.
[    5.750229] systemd[1]: rsync.service: Cannot add dependency job, ignoring: Unit rsync.service is masked.
[    5.750268] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
[    5.751085] systemd[1]: Listening on Journal Audit Socket.
[    5.751152] systemd[1]: Reached target User and Group Name Lookups.
[    5.751322] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.751387] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.751431] systemd[1]: Listening on udev Kernel Socket.
[    5.751571] systemd[1]: Created slice System Slice.
[    5.751704] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.751761] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.751803] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.751848] systemd[1]: Listening on Syslog Socket.
[    5.751914] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.752413] systemd[1]: Mounting POSIX Message Queue File System...
[    5.752551] systemd[1]: Created slice system-getty.slice.
[    5.752615] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.752641] systemd[1]: Reached target Encrypted Volumes.
[    5.752665] systemd[1]: Reached target Remote File Systems.
[    5.752727] systemd[1]: Listening on udev Control Socket.
[    5.753200] systemd[1]: Mounting Debug File System...
[    5.753797] systemd[1]: Mounting Huge Pages File System...
[    5.753878] systemd[1]: Listening on Journal Socket.
[    5.863915] systemd[1]: Starting Set the console keyboard layout...
[    5.864452] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.864956] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.865463] systemd[1]: Starting Journal Service...
[    5.909731] systemd[1]: Starting Load Kernel Modules...
[    5.909875] systemd[1]: Created slice User and Session Slice.
[    5.909917] systemd[1]: Reached target Slices.
[    5.964078] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.964887] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.082177] systemd[1]: Started Journal Service.
[    6.211013] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.438919] systemd-journald[178]: Received request to flush runtime journal from PID 1
[    7.187507] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    7.187514] ACPI: Power Button [PWRB]
[    7.187560] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.187563] ACPI: Power Button [PWRF]
[    7.221377] EDAC MC: Ver: 3.0.0
[    7.316810] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[    7.340959] EDAC ie31200: No ECC support
[    7.427462] [drm] Initialized drm 1.1.0 20060810
[    7.468575] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    7.619673] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.761050] AVX version of gcm_enc/dec engaged.
[    7.762469] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    7.824627] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20140424/utaddress-254)
[    7.824632] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.824635] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[    7.824638] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.824639] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[    7.824641] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.824642] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[    7.824644] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.824645] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.862710] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    7.862802] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    7.913797] [drm] Memory usable by graphics device = 2048M
[    7.913801] [drm] Replacing VGA console driver
[    7.914798] Console: switching to colour dummy device 80x25
[    7.939404] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    7.939419] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.939421] [drm] Driver supports precise vblank timestamp query.
[    7.939505] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.951480] [drm] Wrong MCH_SSKPD value: 0x20100406
[    7.951483] [drm] This can cause pipe underruns and display issues.
[    7.951484] [drm] Please upgrade your BIOS to fix this.
[    8.023373] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    8.095065] fbcon: inteldrmfb (fb0) is primary device
[    8.142371] Console: switching to colour frame buffer device 240x67
[    8.146490] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.146492] i915 0000:00:02.0: registered panic notifier
[    8.179228] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.179488] acpi device:4c: registered as cooling_device9
[    8.179583] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    8.179635] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.180124] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    8.294464] alg: No test for crc32 (crc32-pclmul)
[    8.325840] iTCO_vendor_support: vendor-support=0
[    8.370237] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.370271] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    8.370463] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.424999] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    8.425003] sound hdaudioC0D0:    speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    8.425005] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    8.425007] sound hdaudioC0D0:    mono: mono_out=0x0
[    8.425008] sound hdaudioC0D0:    inputs:
[    8.425011] sound hdaudioC0D0:      Front Mic=0x19
[    8.425013] sound hdaudioC0D0:      Rear Mic=0x18
[    8.461636] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    8.461701] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.461761] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.461817] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.461873] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.665654] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:09DA:000A.0003/input/input12
[    8.665923] a4tech 0003:09DA:000A.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-1.2/input0
[    9.007657] cfg80211: Calling CRDA to update world regulatory domain
[    9.318598] media: Linux media interface: v0.10
[    9.339412] Linux video capture interface: v2.00
[    9.506516] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[    9.554456] rtl8192ce 0000:02:00.0: firmware: direct-loading firmware rtlwifi/rtl8192cfw.bin
[    9.789317] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    9.941602] usbcore: registered new interface driver snd-usb-audio
[   10.007362] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (058f:3832)
[   10.012783] input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[   10.012852] usbcore: registered new interface driver uvcvideo
[   10.012854] USB Video Class driver (1.1.1)
[   10.195666] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   10.195894] rtlwifi: wireless switch is on
[   10.257817] intel_rapl: Found RAPL domain package
[   10.257823] intel_rapl: Found RAPL domain core
[   10.257835] intel_rapl: Found RAPL domain uncore
[   10.685004] Adding 5858300k swap on /dev/sda6.  Priority:-1 extents:1 across:5858300k FS
[   11.263123] cfg80211: World regulatory domain updated:
[   11.263127] cfg80211:  DFS Master region: unset
[   11.263129] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.263132] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.263135] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   11.263137] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   11.263139] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   11.263142] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   11.263144] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   11.263146] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   11.263148] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   12.499493] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   17.293507] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   17.401468] r8169 0000:03:00.0 enp3s0: link down
[   17.401487] r8169 0000:03:00.0 enp3s0: link down
[   17.401528] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   17.769938] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.118983] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   19.514347] r8169 0000:03:00.0 enp3s0: link up
[   19.514359] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[  361.144275] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  677.482353] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
dronnet
 
Posts: 17
Joined: 2018-03-30 11:26

Re: monoblock monitor does not work

Postby dronnet » 2018-04-02 12:50

Both monitors are connected, the main one is on HDMI-1, second DP-2

Code: Select all
dron@dron:~$ lspci -k
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
        Subsystem: Elitegroup Computer Systems Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
        Kernel modules: ie31200_edac
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
        Subsystem: Elitegroup Computer Systems Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
        Kernel driver in use: i915
        Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family MEI Controller
        Kernel driver in use: mei_me
        Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family High Definition Audio Controller
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05)
        Subsystem: Elitegroup Computer Systems H61 Express Chipset Family LPC Controller
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich
00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller
        Kernel driver in use: ata_piix
        Kernel modules: ata_piix, ata_generic
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family SMBus Controller
        Kernel modules: i2c_i801
00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05)
        Subsystem: Elitegroup Computer Systems 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller
        Kernel driver in use: ata_piix
        Kernel modules: ata_piix, ata_generic
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
        Subsystem: AzureWave AW-NE139H Half-size Mini PCIe Card
        Kernel driver in use: rtl8192ce
        Kernel modules: rtl8192ce
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
        Subsystem: Elitegroup Computer Systems RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
        Kernel driver in use: r8169
        Kernel modules: r8169
dron@dron:~$

dronnet
 
Posts: 17
Joined: 2018-03-30 11:26

Re: monoblock monitor does not work

Postby debiman » 2018-04-04 14:45

dronnet wrote:
Code: Select all
dron@dron:~$ lspci -k
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
        Subsystem: Elitegroup Computer Systems Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
        Kernel driver in use: i915
        Kernel modules: i915
i just searched for a good while, i cannot find anyhting that would help with this hardware. sorry. it looks like a pretty normal intel gpu to me.

about your dmesg output: my instructions were faulty.
please, do in this order:

1. enter 'dmesg -w' in a terminal, then press enter a dozen times or so; we are not interested in the output currently visible, and want it to scroll out of the way.
2. unplug the monitor.
3. wait 30s, then press enter again a few times.
4. now plug the monitor in, and wait 30s again.

then please post the output that has accumulated between 2. and 4., and nothing before that!
User avatar
debiman
 
Posts: 2499
Joined: 2013-03-12 07:18

Re: monoblock monitor does not work

Postby dronnet » 2018-04-06 09:51

Test 1:
Connected main monitor DP-2 and the second monitor CHDMI-1.
Monitor DP-2 is not working, black screen

Code: Select all
dron@dron:~$ su
Пароль:
root@dron:/home/dron# dmesg -w
[    0.000000] microcode: microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Linux version 4.9.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=ec6cf26f-5d8d-464a-a43f-d506abc11d19 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d5cc9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d5cca000-0x00000000d62bffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d62c0000-0x00000000d6522fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d6523000-0x00000000d652efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d652f000-0x00000000d653ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d6540000-0x00000000d6544fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d6545000-0x00000000d6587fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d6588000-0x00000000d6dc5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d6dc6000-0x00000000d6ff2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d6ff3000-0x00000000d6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.                                                                                                                         
[    0.000000] DMI: ECS H61H-G11/H61H-G11, BIOS 4.6.5 05/22/2012                                                                                           
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved                                                                               
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable                                                                                             
[    0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000                                                                                       
[    0.000000] MTRR default type: uncachable                                                                                                               
[    0.000000] MTRR fixed ranges enabled:                                                                                                                 
[    0.000000]   00000-9FFFF write-back                                                                                                                   
[    0.000000]   A0000-BFFFF uncachable                                                                                                                   
[    0.000000]   C0000-CFFFF write-protect                                                                                                                 
[    0.000000]   D0000-E7FFF uncachable                                                                                                                   
[    0.000000]   E8000-FFFFF write-protect                                                                                                                 
[    0.000000] MTRR variable ranges enabled:                                                                                                               
[    0.000000]   0 base 000000000 mask F00000000 write-back                                                                                               
[    0.000000]   1 base 100000000 mask FE0000000 write-back                                                                                               
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable                                                                                               
[    0.000000]   3 base 0D8000000 mask FF8000000 uncachable                                                                                               
[    0.000000]   4 base 0D7800000 mask FFF800000 uncachable                                                                                               
[    0.000000]   5 base 11F800000 mask FFF800000 uncachable                                                                                               
[    0.000000]   6 base 11F600000 mask FFFE00000 uncachable                                                                                               
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: update [mem 0xd7800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xd7000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fccb0-0x000fccbf] mapped at [ffff9ca5000fccb0]
[    0.000000] Base memory trampoline at [ffff9ca500098000] 98000 size 24576
[    0.000000] BRK [0x8f739000, 0x8f739fff] PGTABLE
[    0.000000] BRK [0x8f73a000, 0x8f73afff] PGTABLE
[    0.000000] BRK [0x8f73b000, 0x8f73bfff] PGTABLE
[    0.000000] BRK [0x8f73c000, 0x8f73cfff] PGTABLE
[    0.000000] BRK [0x8f73d000, 0x8f73dfff] PGTABLE
[    0.000000] BRK [0x8f73e000, 0x8f73efff] PGTABLE
[    0.000000] BRK [0x8f73f000, 0x8f73ffff] PGTABLE
[    0.000000] BRK [0x8f740000, 0x8f740fff] PGTABLE
[    0.000000] BRK [0x8f741000, 0x8f741fff] PGTABLE
[    0.000000] BRK [0x8f742000, 0x8f742fff] PGTABLE
[    0.000000] BRK [0x8f743000, 0x8f743fff] PGTABLE
[    0.000000] BRK [0x8f744000, 0x8f744fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35cc5000-0x36e59fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000D6523070 000064 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D652C898 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000D6523168 00972B (v02 ALASKA A M I    00000015 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000D653EF80 000040
[    0.000000] ACPI: APIC 0x00000000D652C990 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000D652CA08 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000D652CA48 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000D652CA80 000460 (v01 IdeRef IdeTable 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000D652CEE0 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000D652D890 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000D652E328 0000B0 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11f5fa000-0x11f5fefff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000d5cc9fff]
[    0.000000]   node   0: [mem 0x00000000d6588000-0x00000000d6dc5fff]
[    0.000000]   node   0: [mem 0x00000000d6ff3000-0x00000000d6ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
[    0.000000] On node 0 totalpages: 1005745
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13645 pages used for memmap
[    0.000000]   DMA32 zone: 873236 pages, LIFO batch:31
[    0.000000]   Normal zone: 2008 pages used for memmap
[    0.000000]   Normal zone: 128512 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000d7a00000-0x00000000df9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd5cca000-0xd62bffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd62c0000-0xd6522fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6523000-0xd652efff]
[    0.000000] PM: Registered nosave memory: [mem 0xd652f000-0xd653ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6540000-0xd6544fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6545000-0xd6587fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6dc6000-0xd6ff2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7000000-0xd77fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff9ca61f200000 s105240 r8192 d29928 u524288
[    0.000000] pcpu-alloc: s105240 r8192 d29928 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 990007
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=ec6cf26f-5d8d-464a-a43f-d506abc11d19 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3859168K/4022980K available (6236K kernel code, 1159K rwdata, 2868K rodata, 1416K init, 688K bss, 163812K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3192.813 MHz processor
[    0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.62 BogoMIPS (lpj=12771252)
[    0.000026] pid_max: default: 32768 minimum: 301
[    0.000038] ACPI: Core revision 20160831
[    0.004660] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.004699] Security Framework initialized
[    0.004700] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004705] AppArmor: AppArmor disabled by boot time parameter
[    0.004863] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005795] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.006223] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006225] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006451] CPU: Physical Processor ID: 0
[    0.006451] CPU: Processor Core ID: 0
[    0.006455] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.006455] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.006458] mce: CPU supports 9 MCE banks
[    0.006465] CPU0: Thermal monitoring enabled (TM1)
[    0.006474] process: using mwait in idle threads
[    0.006476] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.006477] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.006478] Spectre V2 : Mitigation: Full generic retpoline
[    0.006880] Freeing SMP alternatives memory: 24K
[    0.008571] ftrace: allocating 25236 entries in 99 pages
[    0.026704] smpboot: Max logical packages: 1
[    0.026707] DMAR: Host address width 36
[    0.026708] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.026715] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.026715] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.026719] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.026719] DMAR: RMRR base: 0x000000d6243000 end: 0x000000d6253fff
[    0.026720] DMAR: RMRR base: 0x000000d7800000 end: 0x000000df9fffff
[    0.026722] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.026722] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.026723] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.026981] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.026981] x2apic enabled
[    0.026985] Switched APIC routing to cluster x2apic.
[    0.027416] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.067104] TSC deadline timer enabled
[    0.067107] smpboot: CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.067110] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.067132] ... version:                3
[    0.067132] ... bit width:              48
[    0.067132] ... generic registers:      8
[    0.067133] ... value mask:             0000ffffffffffff
[    0.067133] ... max period:             00007fffffffffff
[    0.067134] ... fixed-purpose events:   3
[    0.067134] ... event mask:             00000007000000ff
[    0.067591] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.067679] x86: Booting SMP configuration:
[    0.067680] .... node  #0, CPUs:      #1 #2 #3
[    0.075981] x86: Booted up 1 node, 4 CPUs
[    0.075983] smpboot: Total of 4 processors activated (25542.50 BogoMIPS)
[    0.078374] devtmpfs: initialized
[    0.078430] x86/mm: Memory block size: 128MB
[    0.080159] PM: Registering ACPI NVS region [mem 0xd62c0000-0xd6522fff] (2502656 bytes)
[    0.080208] PM: Registering ACPI NVS region [mem 0xd652f000-0xd653ffff] (69632 bytes)
[    0.080210] PM: Registering ACPI NVS region [mem 0xd6545000-0xd6587fff] (274432 bytes)
[    0.080251] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.080259] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.080291] pinctrl core: initialized pinctrl subsystem
[    0.080379] NET: Registered protocol family 16
[    0.095964] cpuidle: using governor ladder
[    0.111971] cpuidle: using governor menu
[    0.112003] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.112004] ACPI: bus type PCI registered
[    0.112006] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.112088] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.112090] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.112095] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.112149] PCI: Using configuration type 1 for base access
[    0.112229] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.112265] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.126749] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.126915] ACPI: Added _OSI(Module Device)
[    0.126916] ACPI: Added _OSI(Processor Device)
[    0.126916] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.126917] ACPI: Added _OSI(Processor Aggregator Device)
[    0.127085] ACPI: Executed 1 blocks of module-level executable AML code
[    0.130352] ACPI: Dynamic OEM Table Load:
[    0.130357] ACPI: SSDT 0xFFFF9CA61A9AF000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.130671] ACPI: Dynamic OEM Table Load:
[    0.130674] ACPI: SSDT 0xFFFF9CA6198A3C00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.130899] ACPI: Dynamic OEM Table Load:
[    0.130902] ACPI: SSDT 0xFFFF9CA619994000 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.131710] ACPI: Interpreter enabled
[    0.131726] ACPI: (supports S0 S3 S4 S5)
[    0.131726] ACPI: Using IOAPIC for interrupt routing
[    0.131746] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.137200] ACPI: Power Resource [FN00] (off)
[    0.137266] ACPI: Power Resource [FN01] (off)
[    0.137330] ACPI: Power Resource [FN02] (off)
[    0.137394] ACPI: Power Resource [FN03] (off)
[    0.137458] ACPI: Power Resource [FN04] (off)
[    0.137905] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.137909] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.138008] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.138391] PCI host bridge to bus 0000:00
[    0.138393] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.138394] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.138395] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.138396] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.138397] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.138398] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.138399] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.138400] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.138401] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.138402] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.138403] pci_bus 0000:00: root bus resource [mem 0x11f600000-0xfffffffff window]
[    0.138404] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.138410] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.138492] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
[    0.138500] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.138504] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.138507] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.138605] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.138624] pci 0000:00:16.0: reg 0x10: [mem 0xf7d09000-0xf7d0900f 64bit]
[    0.138694] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.138772] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.138788] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d07000-0xf7d073ff]
[    0.138869] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.138922] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.138956] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.138972] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit]
[    0.139041] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.139089] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.139121] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.139195] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.139241] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.139273] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.139346] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.139392] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.139426] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.139499] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.139545] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.139579] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.139595] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d06000-0xf7d063ff]
[    0.139676] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.139727] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.139760] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.139921] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
[    0.139933] pci 0000:00:1f.2: reg 0x10: [io  0xf110-0xf117]
[    0.139940] pci 0000:00:1f.2: reg 0x14: [io  0xf100-0xf103]
[    0.139946] pci 0000:00:1f.2: reg 0x18: [io  0xf0f0-0xf0f7]
[    0.139953] pci 0000:00:1f.2: reg 0x1c: [io  0xf0e0-0xf0e3]
[    0.139960] pci 0000:00:1f.2: reg 0x20: [io  0xf0d0-0xf0df]
[    0.139967] pci 0000:00:1f.2: reg 0x24: [io  0xf0c0-0xf0cf]
[    0.140059] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.140073] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d05000-0xf7d050ff 64bit]
[    0.140092] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.140174] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[    0.140186] pci 0000:00:1f.5: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.140193] pci 0000:00:1f.5: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.140200] pci 0000:00:1f.5: reg 0x18: [io  0xf090-0xf097]
[    0.140207] pci 0000:00:1f.5: reg 0x1c: [io  0xf080-0xf083]
[    0.140213] pci 0000:00:1f.5: reg 0x20: [io  0xf070-0xf07f]
[    0.140220] pci 0000:00:1f.5: reg 0x24: [io  0xf060-0xf06f]
[    0.140351] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.140429] pci 0000:02:00.0: [10ec:8176] type 00 class 0x028000
[    0.140457] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.140504] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c03fff 64bit]
[    0.140675] pci 0000:02:00.0: supports D1 D2
[    0.140676] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.140737] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.152013] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.152017] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.152022] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.152115] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.152137] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.152169] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.152189] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.152295] pci 0000:03:00.0: supports D1 D2
[    0.152296] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.152343] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.164012] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.164016] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.164026] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.164474] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.164516] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.164556] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.164595] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.164634] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.164674] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.164714] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.164753] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.164944] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.165013] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.165014] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.165016] vgaarb: loaded
[    0.165016] vgaarb: bridge control possible 0000:00:02.0
[    0.165060] PCI: Using ACPI for IRQ routing
[    0.166562] PCI: pci_cache_line_size set to 64 bytes
[    0.166601] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.166603] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.166603] e820: reserve RAM buffer [mem 0xd5cca000-0xd7ffffff]
[    0.166605] e820: reserve RAM buffer [mem 0xd6dc6000-0xd7ffffff]
[    0.166605] e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff]
[    0.166606] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[    0.166718] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.166722] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.168739] clocksource: Switched to clocksource hpet
[    0.173555] VFS: Disk quotas dquot_6.6.0
[    0.173576] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.173641] pnp: PnP ACPI init
[    0.173727] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.173730] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.173796] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.173797] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.173799] system 00:01: [io  0xffff] has been reserved
[    0.173800] system 00:01: [io  0xffff] has been reserved
[    0.173801] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.173802] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.173804] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.173805] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.173807] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.173828] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.173867] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.173869] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.173971] system 00:04: [io  0x0a20-0x0a3f] has been reserved
[    0.173972] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.173973] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.173975] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174033] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.174035] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174217] pnp 00:06: [dma 0 disabled]
[    0.174262] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.174430] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.174431] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.174432] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.174433] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.174435] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.174436] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.174437] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.174439] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.174440] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.174441] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.174442] system 00:07: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    0.174444] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174561] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[    0.174562] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[    0.174564] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.174580] pnp: PnP ACPI: found 9 devices
[    0.180498] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.180511] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.180513] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.180514] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.180530] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.180531] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.180533] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.180534] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.180535] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.180536] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.180541] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
[    0.180546] pci 0000:00:1c.0: BAR 15: assigned [mem 0x11f600000-0x11f7fffff 64bit pref]
[    0.180547] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.180549] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.180551] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.180556] pci 0000:00:1c.0:   bridge window [mem 0xdfb00000-0xdfcfffff]
[    0.180559] pci 0000:00:1c.0:   bridge window [mem 0x11f600000-0x11f7fffff 64bit pref]
[    0.180565] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.180567] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.180571] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.180578] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.180580] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.180587] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.180592] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.180593] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.180595] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.180596] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.180597] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.180598] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.180599] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.180600] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.180601] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.180602] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
[    0.180603] pci_bus 0000:00: resource 14 [mem 0x11f600000-0xfffffffff window]
[    0.180604] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.180605] pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfcfffff]
[    0.180606] pci_bus 0000:01: resource 2 [mem 0x11f600000-0x11f7fffff 64bit pref]
[    0.180607] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.180608] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.180609] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.180610] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.180693] NET: Registered protocol family 2
[    0.180831] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.180898] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.181001] TCP: Hash tables configured (established 32768 bind 32768)
[    0.181020] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.181035] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.181080] NET: Registered protocol family 1
[    0.181096] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.181108] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.228868] PCI: CLS 64 bytes, default 64
[    0.228905] Unpacking initramfs...
[    0.469414] Freeing initrd memory: 18004K
[    0.469459] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.469461] software IO TLB [mem 0xd1cca000-0xd5cca000] (64MB) mapped at [ffff9ca5d1cca000-ffff9ca5d5cc9fff]
[    0.469741] audit: initializing netlink subsys (disabled)
[    0.469759] audit: type=2000 audit(1523010379.472:1): initialized
[    0.470068] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.470098] zbud: loaded
[    0.470742] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.470763] io scheduler noop registered
[    0.470763] io scheduler deadline registered
[    0.470772] io scheduler cfq registered (default)
[    0.471162] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.471166] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.471176] intel_idle: MWAIT substates: 0x1120
[    0.471177] intel_idle: v0.4.1 model 0x3A
[    0.471277] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.471378] GHES: HEST is not enabled!
[    0.471417] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.491897] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.492319] Linux agpgart interface v0.103
[    0.492370] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.492370] AMD IOMMUv2 functionality not available on this system
[    0.492645] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.760832] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.760966] mousedev: PS/2 mouse device common for all mice
[    0.760999] rtc_cmos 00:02: RTC can wake from S4
[    0.761143] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.761169] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.761177] intel_pstate: Intel P-state driver initializing
[    0.761495] ledtrig-cpu: registered to indicate activity on CPUs
[    0.762223] NET: Registered protocol family 10
[    0.762577] mip6: Mobile IPv6
[    0.762579] NET: Registered protocol family 17
[    0.762582] mpls_gso: MPLS GSO support
[    0.762835] microcode: sig=0x306a9, pf=0x2, revision=0x1c
[    0.762977] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.763171] registered taskstats version 1
[    0.763190] zswap: loaded using pool lzo/zbud
[    0.763339] ima: No TPM chip found, activating TPM-bypass!
[    0.763686] rtc_cmos 00:02: setting system clock to 2018-04-06 10:26:20 UTC (1523010380)
[    0.763792] PM: Hibernation image not present or could not be loaded.
[    0.765429] Freeing unused kernel memory: 1416K
[    0.765431] Write protecting the kernel read-only data: 12288k
[    0.766116] Freeing unused kernel memory: 1940K
[    0.770076] Freeing unused kernel memory: 1228K
[    0.778231] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.797619] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.797712] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.797724] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.798850] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.798899] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.800136] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.800566] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.800645] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.800717] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.800833] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.834545] thermal LNXTHERM:00: registered as thermal_zone0
[    0.834547] ACPI: Thermal Zone [TZ00] (28 C)
[    0.835595] thermal LNXTHERM:01: registered as thermal_zone1
[    0.835596] ACPI: Thermal Zone [TZ01] (30 C)
[    0.837293] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.837303] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.837939] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffbc5040665000, ec:a8:6b:84:a0:ae, XID 0c900800 IRQ 26
[    0.837941] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.838065] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.838893] SCSI subsystem initialized
[    0.841442] ACPI: bus type USB registered
[    0.841467] usbcore: registered new interface driver usbfs
[    0.841477] usbcore: registered new interface driver hub
[    0.841506] usbcore: registered new device driver usb
[    0.841896] libata version 3.00 loaded.
[    0.842235] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.842433] ata_piix 0000:00:1f.2: version 2.13
[    0.842457] ehci-pci: EHCI PCI platform driver
[    0.842599] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.842861] AVX version of gcm_enc/dec engaged.
[    0.842861] AES CTR mode by8 optimization enabled
[    0.854458] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.001519] scsi host0: ata_piix
[    1.001914] scsi host1: ata_piix
[    1.002007] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
[    1.002012] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
[    1.002202] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.002684] scsi host2: ata_piix
[    1.002944] scsi host3: ata_piix
[    1.003027] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[    1.003031] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[    1.003243] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.003253] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.003267] ehci-pci 0000:00:1a.0: debug port 2
[    1.007185] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.007204] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d07000
[    1.020788] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.020856] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.020858] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.020860] usb usb1: Product: EHCI Host Controller
[    1.020862] usb usb1: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd
[    1.020864] usb usb1: SerialNumber: 0000:00:1a.0
[    1.021118] hub 1-0:1.0: USB hub found
[    1.021128] hub 1-0:1.0: 2 ports detected
[    1.021455] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.021461] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.021475] ehci-pci 0000:00:1d.0: debug port 2
[    1.025373] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.025389] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d06000
[    1.040806] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.040861] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.040864] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.040865] usb usb2: Product: EHCI Host Controller
[    1.040867] usb usb2: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd
[    1.040869] usb usb2: SerialNumber: 0000:00:1d.0
[    1.041125] hub 2-0:1.0: USB hub found
[    1.041134] hub 2-0:1.0: 2 ports detected
[    1.327013] ata4: SATA link down (SStatus 0 SControl 330)
[    1.338303] ata3: SATA link down (SStatus 0 SControl 330)
[    1.348786] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.368758] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.496767] tsc: Refined TSC clocksource calibration: 3192.747 MHz
[    1.496775] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0586cde62, max_idle_ns: 440795354967 ns
[    1.497189] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.497192] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.497578] hub 1-1:1.0: USB hub found
[    1.497740] hub 1-1:1.0: 4 ports detected
[    1.517122] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.517125] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.517411] hub 2-1:1.0: USB hub found
[    1.517484] hub 2-1:1.0: 6 ports detected
[    1.784754] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    1.804754] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[    1.904471] usb 1-1.1: New USB device found, idVendor=1c4f, idProduct=0002
[    1.904474] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.904476] usb 1-1.1: Product: USB Keykoard
[    1.904478] usb 1-1.1: Manufacturer: USB
[    1.906841] hidraw: raw HID events driver (C) Jiri Kosina
[    1.912180] usbcore: registered new interface driver usbhid
[    1.912181] usbhid: USB HID core driver
[    1.913100] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1C4F:0002.0001/input/input1
[    1.922463] usb 2-1.2: New USB device found, idVendor=09da, idProduct=000a
[    1.922466] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.922467] usb 2-1.2: Product: USB Mouse
[    1.922469] usb 2-1.2: Manufacturer: A4Tech
[    1.972993] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.1/input0
[    1.973226] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1C4F:0002.0002/input/input2
[    1.984762] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    2.032872] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.1/input1
[    2.207054] usb 1-1.3: New USB device found, idVendor=058f, idProduct=3832
[    2.207057] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.207059] usb 1-1.3: Product: USB 2.0 PC Camera
[    2.207061] usb 1-1.3: Manufacturer: Alcor Micro, Corp.
[    2.356761] ata1.01: failed to resume link (SControl 0)
[    2.356837] ata2.01: failed to resume link (SControl 0)
[    2.516798] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[    2.516811] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.516970] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[    2.516985] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.516997] ata1.01: link offline, clearing class 3 to NONE
[    2.519360] ata2.00: ATA-8: WDC WD5000BPVT-60HXZT3, 01.01A01, max UDMA/133
[    2.519363] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.520927] clocksource: Switched to clocksource tsc
[    2.524064] ata2.00: configured for UDMA/133
[    2.536992] ata1.00: ATAPI: HL-DT-ST DVDRAM GT60N, 1.00, max UDMA/133
[    2.560995] ata1.00: configured for UDMA/133
[    2.565571] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT60N     1.00 PQ: 0 ANSI: 5
[    2.578934] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-6 1A01 PQ: 0 ANSI: 5
[    2.610949] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.610951] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    2.611007] sd 1:0:0:0: [sda] Write Protect is off
[    2.611010] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.611028] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.625401] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.625403] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.625688] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.674207]  sda: sda1 sda3 < sda5 sda6 sda7 >
[    2.675200] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.888220] random: fast init done
[    3.307988] PM: Starting manual resume from disk
[    3.307992] PM: Hibernation image partition 8:6 present
[    3.307993] PM: Looking for hibernation image.
[    3.308271] PM: Image not found (code -22)
[    3.308272] PM: Hibernation image not present or could not be loaded.
[    3.489837] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.815461] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.921012] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.921226] systemd[1]: Detected architecture x86-64.
[    4.928746] systemd[1]: Set hostname to <dron>.
[    5.555522] random: crng init done
[    6.029081] systemd[1]: rsync.service: Cannot add dependency job, ignoring: Unit rsync.service is masked.
[    6.029099] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
[    6.029710] systemd[1]: Listening on udev Control Socket.
[    6.029783] systemd[1]: Reached target User and Group Name Lookups.
[    6.029829] systemd[1]: Listening on Syslog Socket.
[    6.029890] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.029945] systemd[1]: Listening on Journal Socket.
[    6.585604] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.625945] systemd-journald[214]: Received request to flush runtime journal from PID 1
[    7.577096] EDAC MC: Ver: 3.0.0
[    7.579080] EDAC ie31200: No ECC support
[    7.585875] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    7.585879] ACPI: Power Button [PWRB]
[    7.585928] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.585930] ACPI: Power Button [PWRF]
[    7.648132] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[    7.648137] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.648139] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.648142] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.648143] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.648145] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.648145] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.648148] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.648148] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.666180] [drm] Initialized
[    7.701436] [drm] Memory usable by graphics device = 2048M
[    7.701437] [drm] Replacing VGA console driver
[    7.701904] Console: switching to colour dummy device 80x25
[    7.708133] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.708134] [drm] Driver supports precise vblank timestamp query.
[    7.710329] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.801080] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    7.853052] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    7.853053] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    7.853054] RAPL PMU: hw unit of domain package 2^-16 Joules
[    7.853054] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    7.893213] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    7.893235] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    7.951255] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.951445] acpi device:4c: registered as cooling_device9
[    7.951504] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    7.951526] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    8.024121] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.179183] fbcon: inteldrmfb (fb0) is primary device
[    8.191694] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    8.191695] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    8.191696] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    8.191697] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    8.191697] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    8.191699] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    8.191700] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    8.244531] Console: switching to colour frame buffer device 240x67
[    8.267680] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.421065] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.423863] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    8.423939] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.424012] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.424079] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.424147] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.753396] iTCO_vendor_support: vendor-support=0
[    8.799030] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.799069] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    8.799191] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.955930] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:09DA:000A.0003/input/input12
[    8.956047] a4tech 0003:09DA:000A.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-1.2/input0
[    9.358804] usbcore: registered new interface driver snd-usb-audio
[    9.422768] media: Linux media interface: v0.10
[    9.534645] Linux video capture interface: v2.00
[   10.323044] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (058f:3832)
[   10.329089] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[   10.329093] uvcvideo 1-1.3:1.0: Entity type for entity Extension 6 was not initialized!
[   10.329095] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[   10.329189] input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[   10.329252] usbcore: registered new interface driver uvcvideo
[   10.329253] USB Video Class driver (1.1.1)
[   10.689785] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[   10.730156] rtl8192ce 0000:02:00.0: firmware: direct-loading firmware rtlwifi/rtl8192cfw.bin
[   10.853916] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   10.854145] rtlwifi: rtlwifi: wireless switch is on
[   11.057432] intel_rapl: Found RAPL domain package
[   11.057435] intel_rapl: Found RAPL domain core
[   11.057438] intel_rapl: Found RAPL domain uncore
[   11.181695] Adding 5858300k swap on /dev/sda6.  Priority:-1 extents:1 across:5858300k FS
[   12.406990] rtl8192ce 0000:02:00.0 wlp2s0: renamed from wlan0
[   13.165722] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   17.901574] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   17.940225] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   18.058540] r8169 0000:03:00.0 enp3s0: link down
[   18.058558] r8169 0000:03:00.0 enp3s0: link down
[   18.058610] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   18.071527] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.416734] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.766157] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   19.268844] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   20.163497] r8169 0000:03:00.0 enp3s0: link up
[   20.163506] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[  363.026926] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
























[  679.006936] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready


dronnet
 
Posts: 17
Joined: 2018-03-30 11:26

Re: monoblock monitor does not work

Postby dronnet » 2018-04-06 09:53

between items 2 and 4 appeared onlyЖ

Code: Select all


[  679.006936] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready


dronnet
 
Posts: 17
Joined: 2018-03-30 11:26

Re: monoblock monitor does not work

Postby dronnet » 2018-04-06 10:06

Test 2:
Connected main monitor DP-2 and the second monitor CHDMI-1.
Monitor DP-2 determined in 'xrandr'

Code: Select all
dron@dron:~$ xrandr
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
   1920x1080     60.00*+  50.00    59.94 
   1920x1080i    60.00    50.00    59.94 
   1680x1050     59.88 
   1280x1024     75.02    60.02 
   1440x900      74.98    59.90 
   1280x720      60.00    50.00    59.94 
   1440x576i     50.00 
   1024x768      75.08    60.00 
   1440x480i     60.00    59.94 
   800x600       75.00    60.32 
   720x576       50.00 
   720x480       60.00    59.94 
   640x480       75.00    72.81    66.67    60.00    59.94 
   720x400       70.08 
HDMI-2 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 476mm x 268mm
   1920x1080     59.97*+
   1024x768      85.00 
   848x480       60.00 



Code: Select all
dron@dron:~$ su
Пароль:
root@dron:/home/dron# dmesg -w
[    0.000000] CPU0 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.51-2 (2017-12-03)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=ec6cf26f-5d8d-464a-a43f-d506abc11d19 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:



[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xd7800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xd7000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fccb0-0x000fccbf] mapped at [ffff8800000fccb0]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11f400000-0x11f5fffff]
[    0.000000]  [mem 0x11f400000-0x11f5fffff] page 2M
[    0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11f3fffff]
[    0.000000]  [mem 0x11c000000-0x11f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01afa000, 0x01afafff] PGTABLE
[    0.000000] BRK [0x01afb000, 0x01afbfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xd5cc9fff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xd5bfffff] page 2M
[    0.000000]  [mem 0xd5c00000-0xd5cc9fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xd6588000-0xd6dc5fff]
[    0.000000]  [mem 0xd6588000-0xd65fffff] page 4k
[    0.000000]  [mem 0xd6600000-0xd6bfffff] page 2M
[    0.000000]  [mem 0xd6c00000-0xd6dc5fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xd6ff3000-0xd6ffffff]
[    0.000000]  [mem 0xd6ff3000-0xd6ffffff] page 4k
[    0.000000] RAMDISK: [mem 0x36119000-0x37083fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000D6523070 000064 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D652C898 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000D6523168 00972B (v02 ALASKA A M I    00000015 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000D653EF80 000040
[    0.000000] ACPI: APIC 0x00000000D652C990 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000D652CA08 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000D652CA48 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000D652CA80 000460 (v01 IdeRef IdeTable 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000D652CEE0 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000D652D890 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000D652E328 0000B0 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11f5fffff]
[    0.000000]   NODE_DATA [mem 0x11f5f5000-0x11f5f9fff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xd5cc9fff]
[    0.000000]   node   0: [mem 0xd6588000-0xd6dc5fff]
[    0.000000]   node   0: [mem 0xd6ff3000-0xd6ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11f5fffff]
[    0.000000] On node 0 totalpages: 1005745
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11939 pages used for memmap
[    0.000000]   DMA32 zone: 873236 pages, LIFO batch:31
[    0.000000]   Normal zone: 1757 pages used for memmap
[    0.000000]   Normal zone: 128512 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xd7a00000-0xdf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd5cca000-0xd62bffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd62c0000-0xd6522fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6523000-0xd652efff]
[    0.000000] PM: Registered nosave memory: [mem 0xd652f000-0xd653ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6540000-0xd6544fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6545000-0xd6587fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd6dc6000-0xd6ff2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7000000-0xd77fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011f200000 s81664 r8192 d20736 u524288
[    0.000000] pcpu-alloc: s81664 r8192 d20736 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 991972
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=ec6cf26f-5d8d-464a-a43f-d506abc11d19 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3871736K/4022980K available (5291K kernel code, 949K rwdata, 1836K rodata, 1208K init, 840K bss, 151244K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3192.872 MHz processor
[    0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.74 BogoMIPS (lpj=12771488)
[    0.000028] pid_max: default: 32768 minimum: 301
[    0.000034] ACPI: Core revision 20140424
[    0.005123] ACPI: All ACPI Tables successfully acquired
[    0.005144] Security Framework initialized
[    0.005151] AppArmor: AppArmor disabled by boot time parameter
[    0.005152] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.005339] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.006308] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.006750] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006754] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006945] Initializing cgroup subsys memory
[    0.006949] Initializing cgroup subsys devices
[    0.006954] Initializing cgroup subsys freezer
[    0.006956] Initializing cgroup subsys net_cls
[    0.006959] Initializing cgroup subsys blkio
[    0.006962] Initializing cgroup subsys perf_event
[    0.006963] Initializing cgroup subsys net_prio
[    0.006983] CPU: Physical Processor ID: 0
[    0.006984] CPU: Processor Core ID: 0
[    0.006987] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
               ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.007266] mce: CPU supports 9 MCE banks
[    0.007276] CPU0: Thermal monitoring enabled (TM1)
[    0.007281] process: using mwait in idle threads
[    0.007284] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
               Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
               tlb_flushall_shift: 2
[    0.007375] Freeing SMP alternatives memory: 20K (ffffffff81a1d000 - ffffffff81a22000)
[    0.008433] ftrace: allocating 21712 entries in 85 pages
[    0.015691] dmar: Host address width 36
[    0.015692] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.015699] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.015700] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[    0.015704] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.015705] dmar: RMRR base: 0x000000d6243000 end: 0x000000d6253fff
[    0.015706] dmar: RMRR base: 0x000000d7800000 end: 0x000000df9fffff
[    0.015775] IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.015776] HPET id 0 under DRHD base 0xfed91000
[    0.015777] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.015930] Enabled IRQ remapping in x2apic mode
[    0.015931] Enabling x2apic
[    0.015932] Enabled x2apic
[    0.015936] Switched APIC routing to cluster x2apic.
[    0.016360] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056078] smpboot: CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (fam: 06, model: 3a, stepping: 09)
[    0.056084] TSC deadline timer enabled
[    0.056099] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.056114] ... version:                3
[    0.056115] ... bit width:              48
[    0.056116] ... generic registers:      8
[    0.056116] ... value mask:             0000ffffffffffff
[    0.056117] ... max period:             00007fffffffffff
[    0.056117] ... fixed-purpose events:   3
[    0.056118] ... event mask:             00000007000000ff
[    0.057170] x86: Booting SMP configuration:
[    0.057171] .... node  #0, CPUs:      #1
[    0.067838] CPU1 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.070564] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.070645]  #2
[    0.081071] CPU2 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.084074]  #3
[    0.094492] CPU3 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.097431] x86: Booted up 1 node, 4 CPUs
[    0.097433] smpboot: Total of 4 processors activated (25542.97 BogoMIPS)
[    0.099783] devtmpfs: initialized
[    0.101839] PM: Registering ACPI NVS region [mem 0xd62c0000-0xd6522fff] (2502656 bytes)
[    0.101876] PM: Registering ACPI NVS region [mem 0xd652f000-0xd653ffff] (69632 bytes)
[    0.101878] PM: Registering ACPI NVS region [mem 0xd6545000-0xd6587fff] (274432 bytes)
[    0.101939] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.102551] pinctrl core: initialized pinctrl subsystem
[    0.102607] NET: Registered protocol family 16
[    0.102693] cpuidle: using governor ladder
[    0.102695] cpuidle: using governor menu
[    0.102725] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.102726] ACPI: bus type PCI registered
[    0.102727] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.102788] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.102790] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.102854] PCI: Using configuration type 1 for base access
[    0.113766] ACPI: Added _OSI(Module Device)
[    0.113767] ACPI: Added _OSI(Processor Device)
[    0.113768] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.113769] ACPI: Added _OSI(Processor Aggregator Device)
[    0.115642] ACPI: Executed 1 blocks of module-level executable AML code
[    0.125773] ACPI: Dynamic OEM Table Load:
[    0.125778] ACPI: SSDT 0xFFFF88011E839000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.137701] ACPI: Dynamic OEM Table Load:
[    0.137705] ACPI: SSDT 0xFFFF88011A22E400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.147815] ACPI: Dynamic OEM Table Load:
[    0.147819] ACPI: SSDT 0xFFFF88011A2ECE00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.156593] ACPI: Interpreter enabled
[    0.156598] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.156601] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.156611] ACPI: (supports S0 S3 S4 S5)
[    0.156612] ACPI: Using IOAPIC for interrupt routing
[    0.156635] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.161413] ACPI: Power Resource [FN00] (off)
[    0.161474] ACPI: Power Resource [FN01] (off)
[    0.161536] ACPI: Power Resource [FN02] (off)
[    0.161594] ACPI: Power Resource [FN03] (off)
[    0.161653] ACPI: Power Resource [FN04] (off)
[    0.162056] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.162060] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.162148] \_SB_.PCI0:_OSC invalid UUID
[    0.162149] _OSC request data:1 1f 0
[    0.162152] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.162648] PCI host bridge to bus 0000:00
[    0.162650] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.162652] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.162653] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.162654] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.162655] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.162656] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.162657] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.162658] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.162659] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.162661] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.162662] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.162663] pci_bus 0000:00: root bus resource [mem 0x11f600000-0xfffffffff]
[    0.162669] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.162739] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
[    0.162747] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.162751] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.162755] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.162841] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.162862] pci 0000:00:16.0: reg 0x10: [mem 0xf7d09000-0xf7d0900f 64bit]
[    0.162932] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.163006] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.163025] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d07000-0xf7d073ff]
[    0.163109] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.163157] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.163192] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.163207] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit]
[    0.163277] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.163314] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.163345] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.163423] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.163462] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.163494] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.163570] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.163609] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.163641] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.163718] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.163756] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.163793] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.163812] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d06000-0xf7d063ff]
[    0.163896] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.163941] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.163974] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.164128] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
[    0.164141] pci 0000:00:1f.2: reg 0x10: [io  0xf110-0xf117]
[    0.164148] pci 0000:00:1f.2: reg 0x14: [io  0xf100-0xf103]
[    0.164155] pci 0000:00:1f.2: reg 0x18: [io  0xf0f0-0xf0f7]
[    0.164162] pci 0000:00:1f.2: reg 0x1c: [io  0xf0e0-0xf0e3]
[    0.164168] pci 0000:00:1f.2: reg 0x20: [io  0xf0d0-0xf0df]
[    0.164175] pci 0000:00:1f.2: reg 0x24: [io  0xf0c0-0xf0cf]
[    0.164256] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.164270] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d05000-0xf7d050ff 64bit]
[    0.164289] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.164359] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[    0.164373] pci 0000:00:1f.5: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.164380] pci 0000:00:1f.5: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.164386] pci 0000:00:1f.5: reg 0x18: [io  0xf090-0xf097]
[    0.164393] pci 0000:00:1f.5: reg 0x1c: [io  0xf080-0xf083]
[    0.164400] pci 0000:00:1f.5: reg 0x20: [io  0xf070-0xf07f]
[    0.164407] pci 0000:00:1f.5: reg 0x24: [io  0xf060-0xf06f]
[    0.164539] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.164631] pci 0000:02:00.0: [10ec:8176] type 00 class 0x028000
[    0.164663] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.164709] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c03fff 64bit]
[    0.164887] pci 0000:02:00.0: supports D1 D2
[    0.164888] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.164927] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.173540] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.173546] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.173551] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.173653] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.173675] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.173708] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.173728] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.173835] pci 0000:03:00.0: supports D1 D2
[    0.173836] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.173871] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.185550] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.185555] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.185565] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.185964] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.186001] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.186036] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.186071] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.186105] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.186140] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.186175] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.186209] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.186379] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.186454] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.186455] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.186457] vgaarb: loaded
[    0.186458] vgaarb: bridge control possible 0000:00:02.0
[    0.186503] PCI: Using ACPI for IRQ routing
[    0.187935] PCI: pci_cache_line_size set to 64 bytes
[    0.187973] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.187975] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.187976] e820: reserve RAM buffer [mem 0xd5cca000-0xd7ffffff]
[    0.187977] e820: reserve RAM buffer [mem 0xd6dc6000-0xd7ffffff]
[    0.187978] e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff]
[    0.187979] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[    0.188083] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.188086] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.190099] amd_nb: Cannot enumerate AMD northbridges
[    0.190108] Switched to clocksource hpet
[    0.193715] pnp: PnP ACPI init
[    0.193723] ACPI: bus type PNP registered
[    0.193785] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.193787] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.193842] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.193844] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.193845] system 00:01: [io  0xffff] has been reserved
[    0.193846] system 00:01: [io  0xffff] has been reserved
[    0.193847] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.193849] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.193850] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.193851] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.193853] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.193878] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.193912] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.193914] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.194006] system 00:04: [io  0x0a20-0x0a3f] has been reserved
[    0.194007] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.194009] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.194010] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194062] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.194064] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194246] pnp 00:06: [dma 0 disabled]
[    0.194286] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.194437] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.194439] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.194441] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.194442] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.194443] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.194445] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.194446] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.194447] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.194449] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.194450] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.194452] system 00:07: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    0.194453] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194559] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[    0.194561] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[    0.194562] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.194576] pnp: PnP ACPI: found 9 devices
[    0.194576] ACPI: bus type PNP unregistered
[    0.200550] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.200553] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.200554] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[    0.200571] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.200573] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.200574] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.200578] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
[    0.200582] pci 0000:00:1c.0: BAR 15: assigned [mem 0x11f600000-0x11f7fffff 64bit pref]
[    0.200584] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.200586] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.200588] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.200593] pci 0000:00:1c.0:   bridge window [mem 0xdfb00000-0xdfcfffff]
[    0.200596] pci 0000:00:1c.0:   bridge window [mem 0x11f600000-0x11f7fffff 64bit pref]
[    0.200602] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.200604] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.200608] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.200615] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.200618] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.200624] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.200629] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.200630] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.200632] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.200633] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.200634] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.200635] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.200636] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.200637] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.200638] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.200639] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[    0.200640] pci_bus 0000:00: resource 14 [mem 0x11f600000-0xfffffffff]
[    0.200642] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.200643] pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfcfffff]
[    0.200644] pci_bus 0000:01: resource 2 [mem 0x11f600000-0x11f7fffff 64bit pref]
[    0.200645] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.200646] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.200647] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.200648] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.200696] NET: Registered protocol family 2
[    0.200871] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.200945] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.201048] TCP: Hash tables configured (established 32768 bind 32768)
[    0.201065] TCP: reno registered
[    0.201070] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.201086] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.201145] NET: Registered protocol family 1
[    0.201165] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.201176] pci 0000:00:02.0: Video device with shadowed ROM
[    0.242272] PCI: CLS 64 bytes, default 64
[    0.242312] Unpacking initramfs...
[    0.447312] Freeing initrd memory: 15788K (ffff880036119000 - ffff880037084000)
[    0.447384] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.447386] software IO TLB [mem 0xd1cca000-0xd5cca000] (64MB) mapped at [ffff8800d1cca000-ffff8800d5cc9fff]
[    0.447535] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.447574] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1c
[    0.447578] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1c
[    0.447583] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1c
[    0.447589] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1c
[    0.447637] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.447852] audit: initializing netlink subsys (disabled)
[    0.447871] audit: type=2000 audit(1523011401.448:1): initialized
[    0.448170] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.448189] zbud: loaded
[    0.448338] VFS: Disk quotas dquot_6.5.2
[    0.448352] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.448394] msgmni has been set to 7592
[    0.448630] alg: No test for stdrng (krng)
[    0.448648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.448683] io scheduler noop registered
[    0.448685] io scheduler deadline registered
[    0.448713] io scheduler cfq registered (default)
[    0.449091] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.449103] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.449120] intel_idle: MWAIT substates: 0x1120
[    0.449121] intel_idle: v0.4 model 0x3A
[    0.449122] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.449250] GHES: HEST is not enabled!
[    0.449301] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.469741] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.470044] Linux agpgart interface v0.103
[    0.470122] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.722668] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.722806] mousedev: PS/2 mouse device common for all mice
[    0.722844] rtc_cmos 00:02: RTC can wake from S4
[    0.722985] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.723009] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.723018] Intel P-state driver initializing.
[    0.723029] Intel pstate controlling: cpu 0
[    0.723065] Intel pstate controlling: cpu 1
[    0.723076] Intel pstate controlling: cpu 2
[    0.723127] Intel pstate controlling: cpu 3
[    0.723165] ledtrig-cpu: registered to indicate activity on CPUs
[    0.723641] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.723642] AMD IOMMUv2 functionality not available on this system
[    0.723765] TCP: cubic registered
[    0.723877] NET: Registered protocol family 10
[    0.724144] mip6: Mobile IPv6
[    0.724150] NET: Registered protocol family 17
[    0.724159] mpls_gso: MPLS GSO support
[    0.724560] registered taskstats version 1
[    0.725108] rtc_cmos 00:02: setting system clock to 2018-04-06 10:43:22 UTC (1523011402)
[    0.725233] PM: Hibernation image not present or could not be loaded.
[    0.726225] Freeing unused kernel memory: 1208K (ffffffff818ef000 - ffffffff81a1d000)
[    0.726227] Write protecting the kernel read-only data: 8192k
[    0.726638] Freeing unused kernel memory: 840K (ffff88000152e000 - ffff880001600000)
[    0.727268] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[    0.739645] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.739727] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.739734] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.740252] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.740282] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.740426] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.740459] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.740491] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.740522] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.740553] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.756234] ACPI: Fan [FAN0] (off)
[    0.757654] ACPI: bus type USB registered
[    0.757673] usbcore: registered new interface driver usbfs
[    0.757681] usbcore: registered new interface driver hub
[    0.757702] usbcore: registered new device driver usb
[    0.757799] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.757810] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.757983] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.758079] ehci-pci: EHCI PCI platform driver
[    0.759163] SCSI subsystem initialized
[    0.759939] libata version 3.00 loaded.
[    0.774838] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.774845] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.774859] ehci-pci 0000:00:1a.0: debug port 2
[    0.774948] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.774972] thermal LNXTHERM:00: registered as thermal_zone0
[    0.774974] ACPI: Thermal Zone [TZ00] (28 C)
[    0.775102] thermal LNXTHERM:01: registered as thermal_zone1
[    0.775103] ACPI: Thermal Zone [TZ01] (30 C)
[    0.775145] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000676000, ec:a8:6b:84:a0:ae, XID 0c900800 IRQ 42
[    0.775147] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.775232] ACPI: Fan [FAN1] (off)
[    0.775258] ACPI: Fan [FAN2] (off)
[    0.775281] ACPI: Fan [FAN3] (off)
[    0.775303] ACPI: Fan [FAN4] (off)
[    0.778761] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.778775] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d07000
[    0.790657] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.790715] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.790718] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.790720] usb usb1: Product: EHCI Host Controller
[    0.790731] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.790732] usb usb1: SerialNumber: 0000:00:1a.0
[    0.790852] hub 1-0:1.0: USB hub found
[    0.790856] hub 1-0:1.0: 2 ports detected
[    0.791035] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.791039] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.791050] ehci-pci 0000:00:1d.0: debug port 2
[    0.794947] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.794958] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d06000
[    0.806772] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.806801] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.806802] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.806803] usb usb2: Product: EHCI Host Controller
[    0.806804] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.806805] usb usb2: SerialNumber: 0000:00:1d.0
[    0.806947] hub 2-0:1.0: USB hub found
[    0.806953] hub 2-0:1.0: 2 ports detected
[    0.807506] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
[    0.807510] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.807654] ata_piix 0000:00:1f.2: version 2.13
[    0.807718] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.963560] scsi0 : ata_piix
[    0.963886] scsi1 : ata_piix
[    0.963973] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
[    0.963979] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
[    0.964108] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.964492] scsi2 : ata_piix
[    0.964662] scsi3 : ata_piix
[    0.964721] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[    0.964727] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[    1.102941] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.235504] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.235508] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.235794] hub 1-1:1.0: USB hub found
[    1.235987] hub 1-1:1.0: 4 ports detected
[    1.294290] ata3: SATA link down (SStatus 0 SControl 330)
[    1.305507] ata4: SATA link down (SStatus 0 SControl 330)
[    1.359174] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.447226] tsc: Refined TSC clocksource calibration: 3192.747 MHz
[    1.491592] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.491596] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.492012] hub 2-1:1.0: USB hub found
[    1.492198] hub 2-1:1.0: 6 ports detected
[    1.563347] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    1.666890] usb 1-1.1: New USB device found, idVendor=1c4f, idProduct=0002
[    1.666895] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.666897] usb 1-1.1: Product: USB Keykoard
[    1.666899] usb 1-1.1: Manufacturer: USB
[    1.668865] hidraw: raw HID events driver (C) Jiri Kosina
[    1.674396] usbcore: registered new interface driver usbhid
[    1.674398] usbhid: USB HID core driver
[    1.675241] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1C4F:0002.0001/input/input1
[    1.675405] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.1/input0
[    1.675581] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1C4F:0002.0002/input/input2
[    1.675739] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.1/input1
[    1.739482] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    1.961860] usb 1-1.3: New USB device found, idVendor=058f, idProduct=3832
[    1.961864] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.961867] usb 1-1.3: Product: USB 2.0 PC Camera
[    1.961869] usb 1-1.3: Manufacturer: Alcor Micro, Corp.
[    2.039719] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[    2.137407] usb 2-1.2: New USB device found, idVendor=09da, idProduct=000a
[    2.137411] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.137413] usb 2-1.2: Product: USB Mouse
[    2.137415] usb 2-1.2: Manufacturer: A4Tech
[    2.311977] ata2.01: failed to resume link (SControl 0)
[    2.312055] ata1.01: failed to resume link (SControl 0)
[    2.448279] Switched to clocksource tsc
[    2.468137] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[    2.468153] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.468166] ata1.01: link offline, clearing class 3 to NONE
[    2.468315] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[    2.468330] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.476519] ata1.00: ATAPI: HL-DT-ST DVDRAM GT60N, 1.00, max UDMA/133
[    2.476597] ata2.00: ATA-8: WDC WD5000BPVT-60HXZT3, 01.01A01, max UDMA/133
[    2.476601] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.492538] ata2.00: configured for UDMA/133
[    2.492564] ata1.00: configured for UDMA/133
[    2.498423] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT60N     1.00 PQ: 0 ANSI: 5
[    2.506085] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-6 1A01 PQ: 0 ANSI: 5
[    2.520817] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.520821] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.521036] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.521271] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.521275] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    2.521388] sd 1:0:0:0: [sda] Write Protect is off
[    2.521393] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.521412] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.579776]  sda: sda1 sda3 < sda5 sda6 sda7 >
[    2.580920] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.281075] PM: Starting manual resume from disk
[    3.281081] PM: Hibernation image partition 8:6 present
[    3.281083] PM: Looking for hibernation image.
[    3.281374] PM: Image not found (code -22)
[    3.281377] PM: Hibernation image not present or could not be loaded.
[    3.407348] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.107979] random: nonblocking pool is initialized
[    4.729433] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.837986] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.838165] systemd[1]: Detected architecture x86-64.
[    4.847443] systemd[1]: Set hostname to <dron>.
[    5.815326] systemd[1]: rsync.service: Cannot add dependency job, ignoring: Unit rsync.service is masked.
[    5.815369] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
[    5.816038] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.816105] systemd[1]: Listening on udev Kernel Socket.
[    5.816154] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.816239] systemd[1]: Listening on Journal Audit Socket.
[    5.816286] systemd[1]: Listening on Syslog Socket.
[    5.816326] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.816380] systemd[1]: Listening on Journal Socket.
[    5.816422] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.816572] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.816630] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.816653] systemd[1]: Reached target Encrypted Volumes.
[    5.816672] systemd[1]: Reached target User and Group Name Lookups.
[    5.816800] systemd[1]: Created slice User and Session Slice.
[    5.816824] systemd[1]: Reached target Remote File Systems.
[    5.816907] systemd[1]: Created slice System Slice.
[    5.908027] systemd[1]: Starting Load Kernel Modules...
[    5.938144] systemd[1]: Starting Set the console keyboard layout...
[    5.938717] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.939245] systemd[1]: Starting Journal Service...
[    5.939366] systemd[1]: Created slice system-getty.slice.
[    5.939818] systemd[1]: Mounting POSIX Message Queue File System...
[    5.939963] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.940439] systemd[1]: Mounting Debug File System...
[    5.940920] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.941446] systemd[1]: Mounting Huge Pages File System...
[    5.941478] systemd[1]: Reached target Slices.
[    5.941562] systemd[1]: Listening on udev Control Socket.
[    6.023811] systemd[1]: Started Load Kernel Modules.
[    6.024716] systemd[1]: Starting Apply Kernel Variables...
[    6.075836] systemd[1]: Started Apply Kernel Variables.
[    6.117998] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.118583] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.122507] systemd[1]: Started Journal Service.
[    6.391583] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.557524] systemd-journald[174]: Received request to flush runtime journal from PID 1
[    7.241606] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    7.241613] ACPI: Power Button [PWRB]
[    7.241669] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.241673] ACPI: Power Button [PWRF]
[    7.348874] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20140424/utaddress-254)
[    7.348880] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.348883] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[    7.348885] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.348886] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[    7.348889] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.348890] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[    7.348892] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.348893] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.364256] EDAC MC: Ver: 3.0.0
[    7.394981] EDAC ie31200: No ECC support
[    7.440386] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.450680] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    7.450706] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    7.515194] [drm] Initialized drm 1.1.0 20060810
[    7.548866] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[    7.833998] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    7.969451] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    8.167914] [drm] Memory usable by graphics device = 2048M
[    8.167919] [drm] Replacing VGA console driver
[    8.168960] Console: switching to colour dummy device 80x25
[    8.193010] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    8.193024] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.193025] [drm] Driver supports precise vblank timestamp query.
[    8.193104] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.205195] [drm] Wrong MCH_SSKPD value: 0x20100406
[    8.205198] [drm] This can cause pipe underruns and display issues.
[    8.205199] [drm] Please upgrade your BIOS to fix this.
[    8.271552] cfg80211: Calling CRDA to update world regulatory domain
[    8.276994] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    8.323288] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    8.323292] sound hdaudioC0D0:    speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    8.323294] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    8.323295] sound hdaudioC0D0:    mono: mono_out=0x0
[    8.323296] sound hdaudioC0D0:    inputs:
[    8.323299] sound hdaudioC0D0:      Front Mic=0x19
[    8.323300] sound hdaudioC0D0:      Rear Mic=0x18
[    8.423656] fbcon: inteldrmfb (fb0) is primary device
[    8.456366] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    8.456366] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[    8.462674] Console: switching to colour frame buffer device 240x67
[    8.466000] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.466001] i915 0000:00:02.0: registered panic notifier
[    8.493361] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.493559] acpi device:4c: registered as cooling_device9
[    8.493616] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    8.493642] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.615617] AVX version of gcm_enc/dec engaged.
[    8.616860] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    8.624379] iTCO_vendor_support: vendor-support=0
[    8.646547] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.646575] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    8.646655] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.892130] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    8.892201] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.892266] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.892328] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.892393] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    9.249041] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[    9.530549] rtl8192ce 0000:02:00.0: firmware: direct-loading firmware rtlwifi/rtl8192cfw.bin
[    9.561668] alg: No test for crc32 (crc32-pclmul)
[    9.639352] media: Linux media interface: v0.10
[    9.682616] Linux video capture interface: v2.00
[    9.798730] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    9.882305] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    9.882564] rtlwifi: wireless switch is on
[    9.950946] Adding 5858300k swap on /dev/sda6.  Priority:-1 extents:1 across:5858300k FS
[   10.142990] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:09DA:000A.0003/input/input12
[   10.143178] a4tech 0003:09DA:000A.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-1.2/input0
[   10.277080] usbcore: registered new interface driver snd-usb-audio
[   10.277127] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (058f:3832)
[   10.282598] input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[   10.282687] usbcore: registered new interface driver uvcvideo
[   10.282688] USB Video Class driver (1.1.1)
[   10.601106] intel_rapl: Found RAPL domain package
[   10.601109] intel_rapl: Found RAPL domain core
[   10.601111] intel_rapl: Found RAPL domain uncore
[   11.106331] cfg80211: World regulatory domain updated:
[   11.106336] cfg80211:  DFS Master region: unset
[   11.106338] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.106341] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.106344] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   11.106346] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   11.106349] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   11.106351] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   11.106353] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   11.106355] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   11.106357] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   11.886029] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   17.592121] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   17.699302] r8169 0000:03:00.0 enp3s0: link down
[   17.699321] r8169 0000:03:00.0 enp3s0: link down
[   17.699352] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   18.092034] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.441698] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   19.909636] r8169 0000:03:00.0 enp3s0: link up
[   19.909653] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[  362.063114] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready

                                                                                                                                     
                                                                                                                                     
                                                                                                                                       
                                                                                                                                       
                                                                                                                                       
                                                                                                                                         
                                                                                                                                         
                                                                                                                                         
                                                                                                                                           
                                                                                                                                           
                                                                                                                                             
                                                                                                                                             
                                                                                                                                             
                                                                                                                                               
                                                                                                                                               
                                                                                                                                               
                                                                                                                                               
                                                                                                                                               
                                                                                                                                               
                                                                                                                                               
                                                                                                                                               
                                                                                                                                                 
                                                                                                                                                 
                                                                                                                                                 
                                                                                                                                                   
                                                                                                                                                   
                                                                                                                                                     
                                                                                                                                                     









dronnet
 
Posts: 17
Joined: 2018-03-30 11:26

Re: monoblock monitor does not work

Postby dilberts_left_nut » 2018-04-06 10:19

Please stop dumping walls of raw output.
AdrianTM wrote:There's no hacker in my grandma...
User avatar
dilberts_left_nut
 
Posts: 4842
Joined: 2009-10-05 07:54
Location: enzed

Re: monoblock monitor does not work

Postby dronnet » 2018-04-06 10:46


debiman
, When disconnecting or connecting a monitor, nothing new appears in the log dmesg -w.



dilberts_left_nut
Please stop dumping walls of raw output.

but how to shorten the log? suddenly I had something important to lose?
dronnet
 
Posts: 17
Joined: 2018-03-30 11:26

Next

Return to Beginners Questions

Who is online

Users browsing this forum: No registered users and 6 guests

fashionable