http://support-th.canon-asia.com/index. ... lang=TH#DR
[*]This file gives a brief description on how to build and install Scanner driver
modules.
Introduction:
=============
This package is the scanner driver modules for Canon Electronicns scanners.
These modules are used with SANE (SANE - Scanner Access Now Easy).
This package consists of five modules:
*1 libsane-canondr module
This is a SANE backend module.
*2 canondr_backend scanner name module
This is a SANE backend common module.
*3 canondr_com_usb module
This is a USB connection module.
*4 canondr.conf file
This is a setting file for SANE.
This package supports the scanners;
(see README-scanner name-x.xx.txt file)
*5 Configuration files
This is a setting file for a scanner device.
Licensing:
==========
This package consists of five modules as described above.
No.3, 4 are subject to GNU General Public License (GPL) (see COPYING file).
No.1, 2, 5 are subject to Canon Electronics Inc's License (see
LICENSE-scanner name-x.xx.txt file).
Note that licensing term may vary from file to file. Please consult
each files for the exact licensing conditions.
Requirments:
============
* libusb-devel (0.1.8 or above)
* automake (1.9.2 or above)
* libtool (1.5.6 or above)
* sane backend source code (1.0.22)
Install:
==============
To build and install Scanner driver modules, run make at the top-level
directory of this pakage source trees as follows:
Please put sane-backends-1.0.22.tar.gz in the place same as top-level directory.
$ tar -xzvf sane-backends-1.0.22.tar.gz
$ cd sane-backends-1.0.22
$ ./configure --prefix=/usr --sysconfdir=/etc
$ make
Change the top-level directory of this pakage source trees.
$ make
$ su
# make install
[*]
However, as of
Code: Select all
~/cndrvsane-drf120-1.00-2$ ./configure --prefix=/usr --sysconfdir=/etc
bash: ./configure: No existe el fichero o el directorio