Hi,
Debian 7 is out, woohoo! I've tried pre-release versions over the last few months but also had this problem: my system won't reboot/restart. It exits KDE & looks like it is going to reboot, but instead it stops sending a signal to the screen so it goes to sleep, the main box stops doing anything & it doesn't reboot. I can't get it to respond by ctrl+alt+del, and the reboot button doesn't work either. All I can do is hold down the power switch for 5 seconds to power it down & then switch it back on. I didn't have this issue on Squeeze.
My system is: Debian Wheezy 7, amd64 & i386 on separate HDDs, KDE, fresh install.
Athlon 64 X2 4200+ (socket 939) MSI K8N Neo2 Platinum MoBo (nVidia nForce 3 Ultra chipset), 2GB RAM, ATi Radeon HD4650 AGP 1Gb RAM, SB Live!, Terratec TV card.
I've tried passing GRUB parameters: reboot=efi/bios/acpi/pci, appending noacpi, pci=noacpi, acpi=noirq, pnpacpi=off, nolacpi, but no success yet. I've read in the release notes/eratta about there being some issue with amd64 & UEFI but this is an 8 year old system & doesn't have any modern UEFI to worry about so I'm looking for help on how to fix this please? I've tried chaniging the BIOS power state thing from S1 to S3 but not change either & Squeeze didn't have any problems rebooting.
Thanks in advance for any suggestions.
Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230
[solved] Debian Wheezy won't reboot.
-
mr_marmalade
- Posts: 16
- Joined: 2011-02-10 22:23
[solved] Debian Wheezy won't reboot.
Last edited by mr_marmalade on 2013-05-20 10:49, edited 5 times in total.
-
runny6play
- Posts: 9
- Joined: 2013-05-08 02:11
Re: Debian Wheezy won't reboot.
you should check KDEs logs, and acpi logs. I doubt this is an acpi problem. try using sudo reboot and see what happens.
-
mr_marmalade
- Posts: 16
- Joined: 2011-02-10 22:23
Re: Debian Wheezy won't reboot.
su reboot doesn't work either. What KDE logs do you mean?
I've been looking in /var/log/syslog. There isnt a separate acpi log file, it looks as though there used to be a few years ago, but now it just goes into syslog. I don't see any particularly interesting acpi-related lines at the timestamps when i reboot the system. Here is the syslog info from when I reboot:
Wheezy amd64:The screen shows "[info] will now restart" and then goes blank.
Wheezy i386:The screen shows "[info] will now restart" and then goes blank. Bah, i was hoping i386 wouldn't have the same problem, no such luck!
Squeeze i386 (for comparison):Forcing reboot via "reboot -f" doesn't work either.
I installed systemd, it still won't reboot.
I purged network-manager, it still won't reboot.
With/without firmware-linux-nonfree & firmware-realtek makes no difference.
With a different graphics card, an nVidia GeForce2 MX200 32Mb AGP; still won't reboot.
I've been looking in /var/log/syslog. There isnt a separate acpi log file, it looks as though there used to be a few years ago, but now it just goes into syslog. I don't see any particularly interesting acpi-related lines at the timestamps when i reboot the system. Here is the syslog info from when I reboot:
Wheezy amd64:
Code: Select all
May 8 15:38:15 ZIPPY kernel: [ 311.962554] mtrr: no MTRR for e0000000,10000000 found
May 8 15:38:15 ZIPPY shutdown[3404]: shutting down for system reboot
May 8 15:38:16 ZIPPY init: Switching to runlevel: 6
May 8 15:38:17 ZIPPY avahi-daemon[2584]: Got SIGTERM, quitting.
May 8 15:38:17 ZIPPY avahi-daemon[2584]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::211:9ff:fedc:2614.
May 8 15:38:17 ZIPPY avahi-daemon[2584]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.69.
May 8 15:38:17 ZIPPY NetworkManager[2605]: <info> caught signal 15, shutting down normally.
May 8 15:38:17 ZIPPY NetworkManager[2605]: <warn> quit request received, terminating...
May 8 15:38:17 ZIPPY NetworkManager[2605]: <info> exiting (success)
May 8 15:38:17 ZIPPY avahi-daemon[2584]: avahi-daemon 0.6.31 exiting.
May 8 15:38:18 ZIPPY acpid: exiting
May 8 15:38:18 ZIPPY modem-manager[2768]: <info> Caught signal 15, shutting down...Wheezy i386:
Code: Select all
May 8 16:33:58 ZIPPY kernel: [ 255.266213] mtrr: no MTRR for e0000000,10000000 found
May 8 16:33:58 ZIPPY shutdown[4214]: shutting down for system reboot
May 8 16:33:59 ZIPPY init: Switching to runlevel: 6
May 8 16:34:00 ZIPPY avahi-daemon[2633]: Got SIGTERM, quitting.
May 8 16:34:00 ZIPPY avahi-daemon[2633]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::211:9ff:fedc:2614.
May 8 16:34:00 ZIPPY avahi-daemon[2633]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.69.
May 8 16:34:00 ZIPPY avahi-daemon[2633]: avahi-daemon 0.6.31 exiting.
May 8 16:34:00 ZIPPY NetworkManager[2684]: <info> caught signal 15, shutting down normally.
May 8 16:34:00 ZIPPY NetworkManager[2684]: <warn> quit request received, terminating...
May 8 16:34:00 ZIPPY NetworkManager[2684]: <info> exiting (success)
May 8 16:34:02 ZIPPY acpid: exiting
May 8 16:34:02 ZIPPY modem-manager[2741]: <info> Caught signal 15, shutting down...Squeeze i386 (for comparison):
Code: Select all
May 8 14:48:56 ZIPPY kernel: [ 161.060717] [fglrx] IRQ 16 Disabled
May 8 14:48:56 ZIPPY shutdown[5437]: shutting down for system reboot
May 8 14:48:57 ZIPPY init: Switching to runlevel: 6
May 8 14:48:58 ZIPPY firewall: ** Stopping Arno's Iptables Firewall v1.9.2k **
May 8 14:48:58 ZIPPY avahi-daemon[1908]: Got SIGTERM, quitting.
May 8 14:48:58 ZIPPY avahi-daemon[1908]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::211:9ff:fedc:2614.
May 8 14:48:58 ZIPPY avahi-daemon[1908]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.69.
May 8 14:48:58 ZIPPY avahi-daemon[1908]: avahi-daemon 0.6.27 exiting.
May 8 14:48:58 ZIPPY ntfs-3g[893]: Unmounting /dev/sda6 ()
May 8 14:48:59 ZIPPY kernel: [ 163.332674] fuse exit
May 8 14:48:59 ZIPPY acpid: exiting
May 8 14:48:59 ZIPPY ntpd[3599]: ntpd exiting on signal 15
May 8 14:48:59 ZIPPY rpc.statd[949]: Caught signal 15, un-registering and exiting
May 8 14:48:59 ZIPPY kernel: Kernel logging (proc) stopped.
May 8 14:48:59 ZIPPY rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1798" x-info="http://www.rsyslog.com"] exiting on signal 15.I installed systemd, it still won't reboot.
I purged network-manager, it still won't reboot.
With/without firmware-linux-nonfree & firmware-realtek makes no difference.
With a different graphics card, an nVidia GeForce2 MX200 32Mb AGP; still won't reboot.
Last edited by mr_marmalade on 2013-05-20 10:40, edited 1 time in total.
-
mr_marmalade
- Posts: 16
- Joined: 2011-02-10 22:23
Re: Debian Wheezy won't reboot.
I set the amd64 Wheezy system up to use APM rather than ACPI; I installed the apmd package & booted with GRUB parameters: apm=on acpi=off. The first boot went ok, it took a bit longer than usual as it paused at a point with a 2 minute timeout. I was able to reboot the system for the first time using this APM setup, but the following startup was taking forever and INIT was reporting multiple times as "repawning too fast", i think it was stuck but it allowed me to reboot via ctrl+alt+delete.
Here's the syslog info from the boot (I've had to split the syslog into two parts as it is too long):
Here's the syslog info from the boot (I've had to split the syslog into two parts as it is too long):
Code: Select all
May 19 09:53:45 ZIPPY kernel: imklog 5.8.11, log source = /proc/kmsg started.
May 19 09:53:45 ZIPPY rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="1780" x-info="http://www.rsyslog.com"] start
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Initializing cgroup subsys cpuset
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Initializing cgroup subsys cpu
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=0a9ceeeb-498f-4e42-87d9-71e5b3fb512a ro apm=on acpi=off
May 19 09:53:45 ZIPPY kernel: [ 0.000000] BIOS-provided physical RAM map:
May 19 09:53:45 ZIPPY kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] NX (Execute Disable) protection: active
May 19 09:53:45 ZIPPY kernel: [ 0.000000] SMBIOS 2.2 present.
May 19 09:53:45 ZIPPY kernel: [ 0.000000] DMI: /MS-7025, BIOS 6.00 PG 01/29/2007
May 19 09:53:45 ZIPPY kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] AGP bridge at 00:00:00
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Aperture from AGP @ c0000000 old size 32 MB
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Aperture from AGP @ c0000000 size 32 MB (APSIZE 0)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] MTRR default type: uncachable
May 19 09:53:45 ZIPPY kernel: [ 0.000000] MTRR fixed ranges enabled:
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 00000-9FFFF write-back
May 19 09:53:45 ZIPPY kernel: [ 0.000000] A0000-BFFFF uncachable
May 19 09:53:45 ZIPPY kernel: [ 0.000000] C0000-C7FFF write-protect
May 19 09:53:45 ZIPPY kernel: [ 0.000000] C8000-FFFFF uncachable
May 19 09:53:45 ZIPPY kernel: [ 0.000000] MTRR variable ranges enabled:
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 1 base 00C0000000 mask FFE0000000 write-combining
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 2 disabled
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 3 disabled
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 4 disabled
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 5 disabled
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 6 disabled
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 7 disabled
May 19 09:53:45 ZIPPY kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
May 19 09:53:45 ZIPPY kernel: [ 0.000000] found SMP MP-table at [ffff8800000f5080] f5080
May 19 09:53:45 ZIPPY kernel: [ 0.000000] initial memory mapped : 0 - 20000000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
May 19 09:53:45 ZIPPY kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000007fff0000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 0000000000 - 007fe00000 page 2M
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 007fe00000 - 007fff0000 page 4k
May 19 09:53:45 ZIPPY kernel: [ 0.000000] kernel direct mapping tables up to 7fff0000 @ 1fffc000-20000000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] RAMDISK: 36b58000 - 375a4000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
May 19 09:53:45 ZIPPY kernel: [ 0.000000] No NUMA configuration found
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Faking a node at 0000000000000000-000000007fff0000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Initmem setup node 0 0000000000000000-000000007fff0000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] NODE_DATA [000000007ffeb000 - 000000007ffeffff]
May 19 09:53:45 ZIPPY kernel: [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Zone PFN ranges:
May 19 09:53:45 ZIPPY kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Normal empty
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Movable zone start PFN for each node
May 19 09:53:45 ZIPPY kernel: [ 0.000000] early_node_map[2] active PFN ranges
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009c
May 19 09:53:45 ZIPPY kernel: [ 0.000000] 0: 0x00000100 -> 0x0007fff0
May 19 09:53:45 ZIPPY kernel: [ 0.000000] On node 0 totalpages: 524156
May 19 09:53:45 ZIPPY kernel: [ 0.000000] DMA zone: 56 pages used for memmap
May 19 09:53:45 ZIPPY kernel: [ 0.000000] DMA zone: 5 pages reserved
May 19 09:53:45 ZIPPY kernel: [ 0.000000] DMA zone: 3919 pages, LIFO batch:0
May 19 09:53:45 ZIPPY kernel: [ 0.000000] DMA32 zone: 7112 pages used for memmap
May 19 09:53:45 ZIPPY kernel: [ 0.000000] DMA32 zone: 513064 pages, LIFO batch:31
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
May 19 09:53:45 ZIPPY kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
May 19 09:53:45 ZIPPY kernel: [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Intel MultiProcessor Specification v1.4
May 19 09:53:45 ZIPPY kernel: [ 0.000000] MPTABLE: OEM ID: OEM00000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] MPTABLE: Product ID: PROD00000000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] MPTABLE: APIC at: 0xFEE00000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Processor #0 (Bootup-CPU)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Processor #1
May 19 09:53:45 ZIPPY kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Processors: 2
May 19 09:53:45 ZIPPY kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
May 19 09:53:45 ZIPPY kernel: [ 0.000000] nr_irqs_gsi: 40
May 19 09:53:45 ZIPPY kernel: [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
May 19 09:53:45 ZIPPY kernel: [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
May 19 09:53:45 ZIPPY kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82944 r8192 d23552 u1048576
May 19 09:53:45 ZIPPY kernel: [ 0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
May 19 09:53:45 ZIPPY kernel: [ 0.000000] pcpu-alloc: [0] 0 1
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516983
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Policy zone: DMA32
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=0a9ceeeb-498f-4e42-87d9-71e5b3fb512a ro apm=on acpi=off
May 19 09:53:45 ZIPPY kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Checking aperture...
May 19 09:53:45 ZIPPY kernel: [ 0.000000] AGP bridge at 00:00:00
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Aperture from AGP @ c0000000 old size 32 MB
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Aperture from AGP @ c0000000 size 32 MB (APSIZE 0)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Node 0: aperture @ c0000000 size 512 MB
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Memory: 2048660k/2097088k available (3420k kernel code, 464k absent, 47964k reserved, 3318k data, 576k init)
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Hierarchical RCU implementation.
May 19 09:53:45 ZIPPY kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
May 19 09:53:45 ZIPPY kernel: [ 0.000000] NR_IRQS:33024 nr_irqs:512 16
May 19 09:53:45 ZIPPY kernel: [ 0.000000] spurious 8259A interrupt: IRQ7.
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Console: colour VGA+ 80x25
May 19 09:53:45 ZIPPY kernel: [ 0.000000] console [tty0] enabled
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Fast TSC calibration using PIT
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Detected 2210.130 MHz processor.
May 19 09:53:45 ZIPPY kernel: [ 0.000000] Marking TSC unstable due to TSCs unsynchronized
May 19 09:53:45 ZIPPY kernel: [ 0.008041] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.26 BogoMIPS (lpj=8840520)
May 19 09:53:45 ZIPPY kernel: [ 0.008116] pid_max: default: 32768 minimum: 301
May 19 09:53:45 ZIPPY kernel: [ 0.008211] Security Framework initialized
May 19 09:53:45 ZIPPY kernel: [ 0.008252] AppArmor: AppArmor disabled by boot time parameter
May 19 09:53:45 ZIPPY kernel: [ 0.008469] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
May 19 09:53:45 ZIPPY kernel: [ 0.009682] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
May 19 09:53:45 ZIPPY kernel: [ 0.010310] Mount-cache hash table entries: 256
May 19 09:53:45 ZIPPY kernel: [ 0.010510] Initializing cgroup subsys cpuacct
May 19 09:53:45 ZIPPY kernel: [ 0.010551] Initializing cgroup subsys memory
May 19 09:53:45 ZIPPY kernel: [ 0.010601] Initializing cgroup subsys devices
May 19 09:53:45 ZIPPY kernel: [ 0.010638] Initializing cgroup subsys freezer
May 19 09:53:45 ZIPPY kernel: [ 0.010675] Initializing cgroup subsys net_cls
May 19 09:53:45 ZIPPY kernel: [ 0.010712] Initializing cgroup subsys blkio
May 19 09:53:45 ZIPPY kernel: [ 0.010757] Initializing cgroup subsys perf_event
May 19 09:53:45 ZIPPY kernel: [ 0.010826] tseg: 0000000000
May 19 09:53:45 ZIPPY kernel: [ 0.010849] CPU: Physical Processor ID: 0
May 19 09:53:45 ZIPPY kernel: [ 0.012008] CPU: Processor Core ID: 0
May 19 09:53:45 ZIPPY kernel: [ 0.012044] mce: CPU supports 5 MCE banks
May 19 09:53:45 ZIPPY kernel: [ 0.012541] ExtINT not setup in hardware but reported by MP table
May 19 09:53:45 ZIPPY kernel: [ 0.012902] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
May 19 09:53:45 ZIPPY kernel: [ 0.016000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
May 19 09:53:45 ZIPPY kernel: [ 0.016000] ...trying to set up timer (IRQ0) through the 8259A ...
May 19 09:53:45 ZIPPY kernel: [ 0.016000] ..... (found apic 0 pin 0) ...
May 19 09:53:45 ZIPPY kernel: [ 0.056443] ....... works.
May 19 09:53:45 ZIPPY kernel: [ 0.056478] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
May 19 09:53:45 ZIPPY kernel: [ 0.164020] Performance Events: AMD PMU driver.
May 19 09:53:45 ZIPPY kernel: [ 0.164085] ... version: 0
May 19 09:53:45 ZIPPY kernel: [ 0.164121] ... bit width: 48
May 19 09:53:45 ZIPPY kernel: [ 0.164156] ... generic registers: 4
May 19 09:53:45 ZIPPY kernel: [ 0.164192] ... value mask: 0000ffffffffffff
May 19 09:53:45 ZIPPY kernel: [ 0.164229] ... max period: 00007fffffffffff
May 19 09:53:45 ZIPPY kernel: [ 0.164266] ... fixed-purpose events: 0
May 19 09:53:45 ZIPPY kernel: [ 0.164301] ... event mask: 000000000000000f
May 19 09:53:45 ZIPPY kernel: [ 0.164531] NMI watchdog enabled, takes one hw-pmu counter.
May 19 09:53:45 ZIPPY kernel: [ 0.164745] Booting Node 0, Processors #1 Ok.
May 19 09:53:45 ZIPPY kernel: [ 0.164807] smpboot cpu 1: start_ip = 97000
May 19 09:53:45 ZIPPY kernel: [ 0.012000] do_IRQ: 1.55 No irq handler for vector (irq -1)
May 19 09:53:45 ZIPPY kernel: [ 0.252165] NMI watchdog enabled, takes one hw-pmu counter.
May 19 09:53:45 ZIPPY kernel: [ 0.252260] Brought up 2 CPUs
May 19 09:53:45 ZIPPY kernel: [ 0.252296] Total of 2 processors activated (8840.65 BogoMIPS).
May 19 09:53:45 ZIPPY kernel: [ 0.252817] devtmpfs: initialized
May 19 09:53:45 ZIPPY kernel: [ 0.256437] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
May 19 09:53:45 ZIPPY kernel: [ 0.256437] print_constraints: dummy:
May 19 09:53:45 ZIPPY kernel: [ 0.256437] NET: Registered protocol family 16
May 19 09:53:45 ZIPPY kernel: [ 0.256537] node 0 link 0: io port [9000, ffff]
May 19 09:53:45 ZIPPY kernel: [ 0.256541] TOM: 0000000080000000 aka 2048M
May 19 09:53:45 ZIPPY kernel: [ 0.256578] node 0 link 0: mmio [a0000, bffff]
May 19 09:53:45 ZIPPY kernel: [ 0.256582] node 0 link 0: mmio [80000000, fe02ffff]
May 19 09:53:45 ZIPPY kernel: [ 0.256586] bus: [00, 02] on node 0 link 0
May 19 09:53:45 ZIPPY kernel: [ 0.256589] bus: 00 index 0 [io 0x0000-0xffff]
May 19 09:53:45 ZIPPY kernel: [ 0.256592] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
May 19 09:53:45 ZIPPY kernel: [ 0.256595] bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
May 19 09:53:45 ZIPPY kernel: [ 0.256678] PCI: Using configuration type 1 for base access
May 19 09:53:45 ZIPPY kernel: [ 0.257561] bio: create slab <bio-0> at 0
May 19 09:53:45 ZIPPY kernel: [ 0.257561] ACPI: Interpreter disabled.
May 19 09:53:45 ZIPPY kernel: [ 0.257561] vgaarb: loaded
May 19 09:53:45 ZIPPY kernel: [ 0.257561] PCI: Probing PCI hardware
May 19 09:53:45 ZIPPY kernel: [ 0.257561] PCI: Probing PCI hardware (bus 00)
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:00.0: [10de:00e1] type 0 class 0x000600
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xdfffffff pref]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:01.0: [10de:00e0] type 0 class 0x000601
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:01.1: [10de:00e4] type 0 class 0x000c05
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc1f]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:01.1: PME# supported from D3hot D3cold
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:02.0: [10de:00e7] type 0 class 0x000c03
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:02.0: supports D1 D2
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:02.1: [10de:00e7] type 0 class 0x000c03
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02efff]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:02.1: supports D1 D2
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:02.2: [10de:00e8] type 0 class 0x000c03
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:02.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:02.2: supports D1 D2
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:06.0: [10de:00ea] type 0 class 0x000401
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:06.0: reg 10: [io 0xf000-0xf0ff]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:06.0: reg 14: [io 0xec00-0xec7f]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:06.0: reg 18: [mem 0xfe02c000-0xfe02cfff]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:06.0: supports D1 D2
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:08.0: [10de:00e5] type 0 class 0x000101
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:08.0: reg 20: [io 0xe000-0xe00f]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:09.0: [10de:00ee] type 0 class 0x000101
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:09.0: reg 10: [io 0x09e0-0x09e7]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:09.0: reg 14: [io 0x0be0-0x0be3]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:09.0: reg 18: [io 0x0960-0x0967]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:09.0: reg 1c: [io 0x0b60-0x0b63]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:09.0: reg 20: [io 0xcc00-0xcc0f]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:09.0: reg 24: [io 0xc800-0xc87f]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0a.0: [10de:00e3] type 0 class 0x000101
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0a.0: reg 10: [io 0x09f0-0x09f7]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0a.0: reg 14: [io 0x0bf0-0x0bf3]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0a.0: reg 18: [io 0x0970-0x0977]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0a.0: reg 1c: [io 0x0b70-0x0b73]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0a.0: reg 20: [io 0xb400-0xb40f]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0a.0: reg 24: [io 0xb000-0xb07f]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0b.0: [10de:00e2] type 1 class 0x000604
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0e.0: [10de:00ed] type 1 class 0x000604
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
May 19 09:53:45 ZIPPY kernel: [ 0.257561] PCI: peer root bus 00 res updated from pci conf
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:01:00.0: [1002:9495] type 0 class 0x000300
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:01:00.0: reg 14: [io 0xac00-0xacff]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:01:00.0: reg 18: [mem 0xfdfe0000-0xfdfeffff]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:01:00.0: supports D1 D2
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:01:00.1: reg 10: [mem 0xfdffc000-0xfdffffff]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:01:00.1: supports D1 D2
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0b.0: bridge window [mem 0xfdf00000-0xfdffffff]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:00:0b.0: bridge window [mem 0xe0000000-0xefffffff pref]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:02:08.0: [1102:0002] type 0 class 0x000401
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:02:08.0: reg 10: [io 0x9c00-0x9c1f]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:02:08.1: [1102:7002] type 0 class 0x000980
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:02:08.1: reg 10: [io 0x9800-0x9807]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:02:09.0: [14f1:8800] type 0 class 0x000400
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:02:09.0: reg 10: [mem 0xfb000000-0xfbffffff]
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:02:09.2: [14f1:8802] type 0 class 0x000480
May 19 09:53:45 ZIPPY kernel: [ 0.257561] pci 0000:02:09.2: reg 10: [mem 0xfa000000-0xfaffffff]
May 19 09:53:45 ZIPPY kernel: [ 0.260070] pci 0000:02:0d.0: [10ec:8169] type 0 class 0x000200
May 19 09:53:45 ZIPPY kernel: [ 0.260083] pci 0000:02:0d.0: reg 10: [io 0x9400-0x94ff]
May 19 09:53:45 ZIPPY kernel: [ 0.260090] pci 0000:02:0d.0: reg 14: [mem 0xfcfff000-0xfcfff0ff]
May 19 09:53:45 ZIPPY kernel: [ 0.260117] pci 0000:02:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
May 19 09:53:45 ZIPPY kernel: [ 0.260136] pci 0000:02:0d.0: supports D1 D2
May 19 09:53:45 ZIPPY kernel: [ 0.260139] pci 0000:02:0d.0: PME# supported from D1 D2 D3hot D3cold
May 19 09:53:45 ZIPPY kernel: [ 0.260160] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
May 19 09:53:45 ZIPPY kernel: [ 0.260199] pci 0000:00:0e.0: bridge window [io 0x9000-0x9fff]
May 19 09:53:45 ZIPPY kernel: [ 0.260202] pci 0000:00:0e.0: bridge window [mem 0xfa000000-0xfcffffff]
May 19 09:53:45 ZIPPY kernel: [ 0.260206] pci 0000:00:0e.0: bridge window [mem 0xfde00000-0xfdefffff pref]
May 19 09:53:45 ZIPPY kernel: [ 0.260819] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
May 19 09:53:45 ZIPPY kernel: [ 0.261468] PCI: pci_cache_line_size set to 64 bytes
May 19 09:53:45 ZIPPY kernel: [ 0.261476] pci 0000:00:00.0: address space collision: [mem 0xc0000000-0xdfffffff pref] conflicts with GART [mem 0xc0000000-0xdfffffff]
May 19 09:53:45 ZIPPY kernel: [ 0.261582] reserve RAM buffer: 000000000009c000 - 000000000009ffff
May 19 09:53:45 ZIPPY kernel: [ 0.261585] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
May 19 09:53:45 ZIPPY kernel: [ 0.263835] pnp: PnP ACPI: disabled
May 19 09:53:45 ZIPPY kernel: [ 0.264113] PCI: max bus depth: 1 pci_try_num: 2
May 19 09:53:45 ZIPPY kernel: [ 0.264134] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
May 19 09:53:45 ZIPPY kernel: [ 0.264182] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
May 19 09:53:45 ZIPPY kernel: [ 0.264220] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
May 19 09:53:45 ZIPPY kernel: [ 0.264261] pci 0000:00:0b.0: bridge window [mem 0xfdf00000-0xfdffffff]
May 19 09:53:45 ZIPPY kernel: [ 0.264301] pci 0000:00:0b.0: bridge window [mem 0xe0000000-0xefffffff pref]
May 19 09:53:45 ZIPPY kernel: [ 0.264353] pci 0000:02:0d.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
May 19 09:53:45 ZIPPY kernel: [ 0.264398] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
May 19 09:53:45 ZIPPY kernel: [ 0.264436] pci 0000:00:0e.0: bridge window [io 0x9000-0x9fff]
May 19 09:53:45 ZIPPY kernel: [ 0.264475] pci 0000:00:0e.0: bridge window [mem 0xfa000000-0xfcffffff]
May 19 09:53:45 ZIPPY kernel: [ 0.264515] pci 0000:00:0e.0: bridge window [mem 0xfde00000-0xfdefffff pref]
May 19 09:53:45 ZIPPY kernel: [ 0.264569] pci 0000:00:0e.0: setting latency timer to 64
May 19 09:53:45 ZIPPY kernel: [ 0.264573] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
May 19 09:53:45 ZIPPY kernel: [ 0.264576] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
May 19 09:53:45 ZIPPY kernel: [ 0.264579] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
May 19 09:53:45 ZIPPY kernel: [ 0.264582] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
May 19 09:53:45 ZIPPY kernel: [ 0.264585] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
May 19 09:53:45 ZIPPY kernel: [ 0.264588] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref]
May 19 09:53:45 ZIPPY kernel: [ 0.264591] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
May 19 09:53:45 ZIPPY kernel: [ 0.264594] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfcffffff]
May 19 09:53:45 ZIPPY kernel: [ 0.264597] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff pref]
May 19 09:53:45 ZIPPY kernel: [ 0.264668] NET: Registered protocol family 2
May 19 09:53:45 ZIPPY kernel: [ 0.264823] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
May 19 09:53:45 ZIPPY kernel: [ 0.268180] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
May 19 09:53:45 ZIPPY kernel: [ 0.270348] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
May 19 09:53:45 ZIPPY kernel: [ 0.270936] TCP: Hash tables configured (established 262144 bind 65536)
May 19 09:53:45 ZIPPY kernel: [ 0.270977] TCP reno registered
May 19 09:53:45 ZIPPY kernel: [ 0.271023] UDP hash table entries: 1024 (order: 3, 32768 bytes)
May 19 09:53:45 ZIPPY kernel: [ 0.271082] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
May 19 09:53:45 ZIPPY kernel: [ 0.271264] NET: Registered protocol family 1
May 19 09:53:45 ZIPPY kernel: [ 0.271346] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 35
May 19 09:53:45 ZIPPY kernel: [ 0.340039] pci 0000:00:02.1: PCI->APIC IRQ transform: INT B -> IRQ 28
May 19 09:53:45 ZIPPY kernel: [ 0.412042] pci 0000:00:02.2: PCI->APIC IRQ transform: INT C -> IRQ 39
May 19 09:53:45 ZIPPY kernel: [ 0.412123] pci 0000:01:00.0: Boot video device
May 19 09:53:45 ZIPPY kernel: [ 0.412142] PCI: CLS 64 bytes, default 64
May 19 09:53:45 ZIPPY kernel: [ 0.412212] Unpacking initramfs...
May 19 09:53:45 ZIPPY kernel: [ 0.697770] Freeing initrd memory: 10544k freed
May 19 09:53:45 ZIPPY kernel: [ 0.703861] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
May 19 09:53:45 ZIPPY kernel: [ 0.703906] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
May 19 09:53:45 ZIPPY kernel: [ 0.703956] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
May 19 09:53:45 ZIPPY kernel: [ 0.720798] agpgart-amd64 0000:00:00.0: AGP aperture is 512M @ 0xc0000000
May 19 09:53:45 ZIPPY kernel: [ 0.720798] platform rtc_cmos: registered platform RTC device (no PNP device found)
May 19 09:53:45 ZIPPY kernel: [ 0.720798] audit: initializing netlink socket (disabled)
May 19 09:53:45 ZIPPY kernel: [ 0.720798] type=2000 audit(1368953305.720:1): initialized
May 19 09:53:45 ZIPPY kernel: [ 0.736585] HugeTLB registered 2 MB page size, pre-allocated 0 pages
May 19 09:53:45 ZIPPY kernel: [ 0.736585] VFS: Disk quotas dquot_6.5.2
May 19 09:53:45 ZIPPY kernel: [ 0.736585] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
May 19 09:53:45 ZIPPY kernel: [ 0.736585] msgmni has been set to 4021
May 19 09:53:45 ZIPPY kernel: [ 0.736585] alg: No test for stdrng (krng)
May 19 09:53:45 ZIPPY kernel: [ 0.736585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
May 19 09:53:45 ZIPPY kernel: [ 0.736585] io scheduler noop registered
May 19 09:53:45 ZIPPY kernel: [ 0.736585] io scheduler deadline registered
May 19 09:53:45 ZIPPY kernel: [ 0.736585] io scheduler cfq registered (default)
May 19 09:53:45 ZIPPY kernel: [ 0.736585] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
May 19 09:53:45 ZIPPY kernel: [ 0.736585] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
May 19 09:53:45 ZIPPY kernel: [ 0.736585] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
May 19 09:53:45 ZIPPY kernel: [ 0.736686] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
May 19 09:53:45 ZIPPY kernel: [ 0.784162] Linux agpgart interface v0.103
May 19 09:53:45 ZIPPY kernel: [ 0.784206] i8042: PNP: No PS/2 controller found. Probing ports directly.
May 19 09:53:45 ZIPPY kernel: [ 0.784907] serio: i8042 KBD port at 0x60,0x64 irq 1
May 19 09:53:45 ZIPPY kernel: [ 0.784951] serio: i8042 AUX port at 0x60,0x64 irq 12
May 19 09:53:45 ZIPPY kernel: [ 0.785791] mousedev: PS/2 mouse device common for all mice
May 19 09:53:45 ZIPPY kernel: [ 0.785791] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
May 19 09:53:45 ZIPPY kernel: [ 0.785791] rtc0: alarms up to one day, 114 bytes nvram
May 19 09:53:45 ZIPPY kernel: [ 0.785791] cpuidle: using governor ladder
May 19 09:53:45 ZIPPY kernel: [ 0.785791] cpuidle: using governor menu
May 19 09:53:45 ZIPPY kernel: [ 0.792297] TCP cubic registered
May 19 09:53:45 ZIPPY kernel: [ 0.792379] NET: Registered protocol family 10
May 19 09:53:45 ZIPPY kernel: [ 0.792950] Mobile IPv6
May 19 09:53:45 ZIPPY kernel: [ 0.792986] NET: Registered protocol family 17
May 19 09:53:45 ZIPPY kernel: [ 0.793025] Registering the dns_resolver key type
May 19 09:53:45 ZIPPY kernel: [ 0.793111] PM: Hibernation image not present or could not be loaded.
May 19 09:53:45 ZIPPY kernel: [ 0.793111] registered taskstats version 1
May 19 09:53:45 ZIPPY kernel: [ 0.793111] rtc_cmos rtc_cmos: setting system clock to 2013-05-19 08:48:26 UTC (1368953306)
May 19 09:53:45 ZIPPY kernel: [ 0.793111] Initializing network drop monitor service
May 19 09:53:45 ZIPPY kernel: [ 0.794089] Freeing unused kernel memory: 576k freed
May 19 09:53:45 ZIPPY kernel: [ 0.794403] Write protecting the kernel read-only data: 6144k
May 19 09:53:45 ZIPPY kernel: [ 0.798966] Freeing unused kernel memory: 660k freed
May 19 09:53:45 ZIPPY kernel: [ 0.802529] Freeing unused kernel memory: 676k freed
May 19 09:53:45 ZIPPY kernel: [ 0.808539] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
May 19 09:53:45 ZIPPY kernel: [ 0.859486] SCSI subsystem initialized
May 19 09:53:45 ZIPPY kernel: [ 0.873907] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
May 19 09:53:45 ZIPPY kernel: [ 0.873973] r8169 0000:02:0d.0: PCI->APIC IRQ transform: INT A -> IRQ 39
May 19 09:53:45 ZIPPY kernel: [ 0.874029] r8169 0000:02:0d.0: (unregistered net_device): not PCI Express
May 19 09:53:45 ZIPPY kernel: [ 0.874575] r8169 0000:02:0d.0: eth0: RTL8110s at 0xffffc900009be000, 00:11:09:dc:26:14, XID 04000000 IRQ 39
May 19 09:53:45 ZIPPY kernel: [ 0.874624] r8169 0000:02:0d.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
May 19 09:53:45 ZIPPY kernel: [ 0.882481] usbcore: registered new interface driver usbfs
May 19 09:53:45 ZIPPY kernel: [ 0.882779] usbcore: registered new interface driver hub
May 19 09:53:45 ZIPPY kernel: [ 0.882861] libata version 3.00 loaded.
May 19 09:53:45 ZIPPY kernel: [ 0.883415] pata_amd 0000:00:08.0: version 0.4.1
May 19 09:53:45 ZIPPY kernel: [ 0.883478] pata_amd 0000:00:08.0: setting latency timer to 64
May 19 09:53:45 ZIPPY kernel: [ 0.890220] usbcore: registered new device driver usb
May 19 09:53:45 ZIPPY kernel: [ 0.890829] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 19 09:53:45 ZIPPY kernel: [ 0.893366] scsi0 : pata_amd
May 19 09:53:45 ZIPPY kernel: [ 0.894328] scsi1 : pata_amd
May 19 09:53:45 ZIPPY kernel: [ 0.894328] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
May 19 09:53:45 ZIPPY kernel: [ 0.894328] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
May 19 09:53:45 ZIPPY kernel: [ 0.894328] sata_nv 0000:00:09.0: version 3.5
May 19 09:53:45 ZIPPY kernel: [ 0.894328] sata_nv 0000:00:09.0: can't find IRQ for PCI INT A; probably buggy MP table
May 19 09:53:45 ZIPPY kernel: [ 0.894328] sata_nv 0000:00:09.0: setting latency timer to 64
May 19 09:53:45 ZIPPY kernel: [ 0.894328] scsi2 : sata_nv
May 19 09:53:45 ZIPPY kernel: [ 0.894328] scsi3 : sata_nv
May 19 09:53:45 ZIPPY kernel: [ 0.894328] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 10
May 19 09:53:45 ZIPPY kernel: [ 0.894328] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 10
May 19 09:53:45 ZIPPY kernel: [ 0.894328] sata_nv 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 39
May 19 09:53:45 ZIPPY kernel: [ 0.894328] sata_nv 0000:00:0a.0: setting latency timer to 64
May 19 09:53:45 ZIPPY kernel: [ 0.894328] scsi4 : sata_nv
May 19 09:53:45 ZIPPY kernel: [ 0.894328] scsi5 : sata_nv
May 19 09:53:45 ZIPPY kernel: [ 0.896122] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xb400 irq 39
May 19 09:53:45 ZIPPY kernel: [ 0.896162] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xb408 irq 39
May 19 09:53:45 ZIPPY kernel: [ 0.896221] ehci_hcd 0000:00:02.2: PCI->APIC IRQ transform: INT C -> IRQ 39
May 19 09:53:45 ZIPPY kernel: [ 0.896221] ehci_hcd 0000:00:02.2: setting latency timer to 64
May 19 09:53:45 ZIPPY kernel: [ 0.896221] ehci_hcd 0000:00:02.2: EHCI Host Controller
May 19 09:53:45 ZIPPY kernel: [ 0.896221] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
May 19 09:53:45 ZIPPY kernel: [ 0.896313] ehci_hcd 0000:00:02.2: debug port 1
May 19 09:53:45 ZIPPY kernel: [ 0.896343] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
May 19 09:53:45 ZIPPY kernel: [ 0.896343] ehci_hcd 0000:00:02.2: irq 39, io mem 0xfe02d000
May 19 09:53:45 ZIPPY kernel: [ 0.908079] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
May 19 09:53:45 ZIPPY kernel: [ 0.908149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 19 09:53:45 ZIPPY kernel: [ 0.908188] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 19 09:53:45 ZIPPY kernel: [ 0.908233] usb usb1: Product: EHCI Host Controller
May 19 09:53:45 ZIPPY kernel: [ 0.908270] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
May 19 09:53:45 ZIPPY kernel: [ 0.908307] usb usb1: SerialNumber: 0000:00:02.2
May 19 09:53:45 ZIPPY kernel: [ 0.908387] hub 1-0:1.0: USB hub found
May 19 09:53:45 ZIPPY kernel: [ 0.908400] hub 1-0:1.0: 8 ports detected
May 19 09:53:45 ZIPPY kernel: [ 0.912489] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 19 09:53:45 ZIPPY kernel: [ 0.912597] ohci_hcd 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 35
May 19 09:53:45 ZIPPY kernel: [ 0.912597] ohci_hcd 0000:00:02.0: setting latency timer to 64
May 19 09:53:45 ZIPPY kernel: [ 0.912597] ohci_hcd 0000:00:02.0: OHCI Host Controller
May 19 09:53:45 ZIPPY kernel: [ 0.912678] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
May 19 09:53:45 ZIPPY kernel: [ 0.912678] ohci_hcd 0000:00:02.0: irq 35, io mem 0xfe02f000
May 19 09:53:45 ZIPPY kernel: [ 0.970075] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
May 19 09:53:45 ZIPPY kernel: [ 0.970114] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 19 09:53:45 ZIPPY kernel: [ 0.970159] usb usb2: Product: OHCI Host Controller
May 19 09:53:45 ZIPPY kernel: [ 0.970196] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
May 19 09:53:45 ZIPPY kernel: [ 0.970234] usb usb2: SerialNumber: 0000:00:02.0
May 19 09:53:45 ZIPPY kernel: [ 0.970309] hub 2-0:1.0: USB hub found
May 19 09:53:45 ZIPPY kernel: [ 0.970309] hub 2-0:1.0: 4 ports detected
May 19 09:53:45 ZIPPY kernel: [ 0.970309] ohci_hcd 0000:00:02.1: PCI->APIC IRQ transform: INT B -> IRQ 28
May 19 09:53:45 ZIPPY kernel: [ 0.970309] ohci_hcd 0000:00:02.1: setting latency timer to 64
May 19 09:53:45 ZIPPY kernel: [ 0.970309] ohci_hcd 0000:00:02.1: OHCI Host Controller
May 19 09:53:45 ZIPPY kernel: [ 0.970309] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
May 19 09:53:45 ZIPPY kernel: [ 0.970309] ohci_hcd 0000:00:02.1: irq 28, io mem 0xfe02e000
May 19 09:53:45 ZIPPY kernel: [ 1.026066] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 19 09:53:45 ZIPPY kernel: [ 1.026105] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 19 09:53:45 ZIPPY kernel: [ 1.026150] usb usb3: Product: OHCI Host Controller
May 19 09:53:45 ZIPPY kernel: [ 1.026188] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
May 19 09:53:45 ZIPPY kernel: [ 1.026225] usb usb3: SerialNumber: 0000:00:02.1
May 19 09:53:45 ZIPPY kernel: [ 1.026289] hub 3-0:1.0: USB hub found
May 19 09:53:45 ZIPPY kernel: [ 1.026289] hub 3-0:1.0: 4 ports detected
May 19 09:53:45 ZIPPY kernel: [ 1.056287] ata1.00: ATA-4: WDC WD102AA, 05.05B05, max UDMA/66
May 19 09:53:45 ZIPPY kernel: [ 1.056287] ata1.00: 20044080 sectors, multi 16: LBA
May 19 09:53:45 ZIPPY kernel: [ 1.056287] ata1: nv_mode_filter: 0x1f39f&0x1f3ff->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x0
May 19 09:53:45 ZIPPY kernel: [ 1.072222] ata1.00: configured for UDMA/66
May 19 09:53:45 ZIPPY kernel: [ 1.073194] scsi 0:0:0:0: Direct-Access ATA WDC WD102AA 05.0 PQ: 0 ANSI: 5
May 19 09:53:45 ZIPPY kernel: [ 1.204085] ata3: SATA link down (SStatus 0 SControl 300)
May 19 09:53:45 ZIPPY kernel: [ 1.364097] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 19 09:53:45 ZIPPY kernel: [ 1.372322] ata5.00: ATAPI: ASUS DRW-20B1ST, 1.00, max UDMA/100
May 19 09:53:45 ZIPPY kernel: [ 1.384093] usb 3-3: new low-speed USB device number 2 using ohci_hcd
May 19 09:53:45 ZIPPY kernel: [ 1.388323] ata5.00: configured for UDMA/100
May 19 09:53:45 ZIPPY kernel: [ 1.544104] ata4: SATA link down (SStatus 0 SControl 300)
May 19 09:53:45 ZIPPY kernel: [ 1.544157] irq 35: nobody cared (try booting with the "irqpoll" option)
May 19 09:53:45 ZIPPY kernel: [ 1.544157] Pid: 0, comm: swapper/1 Not tainted 3.2.0-4-amd64 #1 Debian 3.2.41-2+deb7u2
May 19 09:53:45 ZIPPY kernel: [ 1.544185] Call Trace:
May 19 09:53:45 ZIPPY kernel: [ 1.544220] <IRQ> [<ffffffff8109250d>] ? __report_bad_irq+0x2c/0xb5
May 19 09:53:45 ZIPPY kernel: [ 1.544291] [<ffffffff810928ca>] ? note_interrupt+0x170/0x1f2
May 19 09:53:45 ZIPPY kernel: [ 1.544331] [<ffffffff81090c94>] ? handle_irq_event_percpu+0x15f/0x17d
May 19 09:53:45 ZIPPY kernel: [ 1.544371] [<ffffffff810135a5>] ? paravirt_read_tsc+0x5/0x8
May 19 09:53:45 ZIPPY kernel: [ 1.544412] [<ffffffff81065f1d>] ? timekeeping_get_ns+0xd/0x2a
May 19 09:53:45 ZIPPY kernel: [ 1.544450] [<ffffffff81090ce6>] ? handle_irq_event+0x34/0x52
May 19 09:53:45 ZIPPY kernel: [ 1.544490] [<ffffffff81063d58>] ? sched_clock_idle_wakeup_event+0xf/0x17
May 19 09:53:45 ZIPPY kernel: [ 1.544529] [<ffffffff81093041>] ? handle_fasteoi_irq+0x7c/0xaf
May 19 09:53:45 ZIPPY kernel: [ 1.544569] [<ffffffff8100f89d>] ? handle_irq+0x1d/0x21
May 19 09:53:45 ZIPPY kernel: [ 1.544608] [<ffffffff8100f5cd>] ? do_IRQ+0x42/0x98
May 19 09:53:45 ZIPPY kernel: [ 1.544647] [<ffffffff8134dcee>] ? common_interrupt+0x6e/0x6e
May 19 09:53:45 ZIPPY kernel: [ 1.544684] <EOI> [<ffffffff81013a17>] ? native_sched_clock+0x27/0x2f
May 19 09:53:45 ZIPPY kernel: [ 1.544751] [<ffffffff8102b364>] ? native_safe_halt+0x2/0x3
May 19 09:53:45 ZIPPY kernel: [ 1.544790] [<ffffffff81014508>] ? default_idle+0x47/0x7f
May 19 09:53:45 ZIPPY kernel: [ 1.544829] [<ffffffff8100d24d>] ? cpu_idle+0xaf/0xf2
May 19 09:53:45 ZIPPY kernel: [ 1.544868] [<ffffffff8133fce4>] ? start_secondary+0x1d5/0x1db
May 19 09:53:45 ZIPPY kernel: [ 1.544906] handlers:
May 19 09:53:45 ZIPPY kernel: [ 1.544948] [<ffffffffa007b069>] usb_hcd_irq
May 19 09:53:45 ZIPPY kernel: [ 1.545009] Disabling IRQ #35
May 19 09:53:45 ZIPPY kernel: [ 6.384404] ohci_hcd 0000:00:02.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
May 19 09:53:45 ZIPPY kernel: [ 6.388408] ata5.00: qc timeout (cmd 0xa0)
May 19 09:53:45 ZIPPY kernel: [ 6.388446] ata5.00: TEST_UNIT_READY failed (err_mask=0x5)
May 19 09:53:45 ZIPPY kernel: [ 6.856440] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 19 09:53:45 ZIPPY kernel: [ 6.880520] ata5.00: configured for UDMA/100
May 19 09:53:45 ZIPPY kernel: [ 11.880751] ata5.00: qc timeout (cmd 0xa0)
May 19 09:53:45 ZIPPY kernel: [ 11.880790] ata5.00: TEST_UNIT_READY failed (err_mask=0x5)
May 19 09:53:45 ZIPPY kernel: [ 11.880828] ata5: limiting SATA link speed to 1.5 Gbps
May 19 09:53:45 ZIPPY kernel: [ 11.880866] ata5.00: limiting speed to UDMA/100:PIO3
May 19 09:53:45 ZIPPY kernel: [ 12.348783] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 19 09:53:45 ZIPPY kernel: [ 12.373008] ata5.00: configured for UDMA/100
May 19 09:53:45 ZIPPY kernel: [ 17.373093] ata5.00: qc timeout (cmd 0xa0)
May 19 09:53:45 ZIPPY kernel: [ 17.373130] ata5.00: TEST_UNIT_READY failed (err_mask=0x5)
May 19 09:53:45 ZIPPY kernel: [ 17.373168] ata5.00: disabled
May 19 09:53:45 ZIPPY kernel: [ 17.373209] ata5: hard resetting link
May 19 09:53:45 ZIPPY kernel: [ 17.373244] ata5: nv: skipping hardreset on occupied port
May 19 09:53:45 ZIPPY kernel: [ 17.841127] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 19 09:53:45 ZIPPY kernel: [ 17.841169] ata5: EH complete
May 19 09:53:45 ZIPPY kernel: [ 18.153142] ata6: SATA link down (SStatus 0 SControl 300)
May 19 09:53:45 ZIPPY kernel: [ 18.159723] sd 0:0:0:0: [sda] 20044080 512-byte logical blocks: (10.2 GB/9.55 GiB)
May 19 09:53:45 ZIPPY kernel: [ 18.159826] sd 0:0:0:0: [sda] Write Protect is off
May 19 09:53:45 ZIPPY kernel: [ 18.159826] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 19 09:53:45 ZIPPY kernel: [ 18.159826] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 19 09:53:45 ZIPPY kernel: [ 18.213150] sda: sda1 sda2 < sda5 >
May 19 09:53:45 ZIPPY kernel: [ 18.214711] sd 0:0:0:0: [sda] Attached SCSI disk
May 19 09:53:45 ZIPPY kernel: [ 18.217536] sd 0:0:0:0: Attached scsi generic sg0 type 0
May 19 09:53:45 ZIPPY kernel: [ 240.751058] INFO: task udevd:62 blocked for more than 120 seconds.
May 19 09:53:45 ZIPPY kernel: [ 240.751101] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 19 09:53:45 ZIPPY kernel: [ 240.751147] udevd D ffff8800371b4340 0 62 49 0x00000000
May 19 09:53:45 ZIPPY kernel: [ 240.751238] ffff8800371b4340 0000000000000086 0000000000000000 ffff88003721ea70
May 19 09:53:45 ZIPPY kernel: [ 240.751386] 0000000000013780 ffff8800371fffd8 ffff8800371fffd8 ffff8800371b4340
May 19 09:53:45 ZIPPY kernel: [ 240.751532] ffff880037132180 0000001000000010 00000000000280d0 ffff880036c880e8
May 19 09:53:45 ZIPPY kernel: [ 240.751680] Call Trace:
May 19 09:53:45 ZIPPY kernel: [ 240.751720] [<ffffffff8134cfef>] ? __mutex_lock_common.isra.5+0xff/0x164
May 19 09:53:45 ZIPPY kernel: [ 240.751761] [<ffffffff8134cedd>] ? mutex_lock+0x1a/0x2d
May 19 09:53:45 ZIPPY kernel: [ 240.751807] [<ffffffffa0082841>] ? show_manufacturer+0x16/0x41 [usbcore]
May 19 09:53:45 ZIPPY kernel: [ 240.751848] [<ffffffff8124e5d3>] ? dev_attr_show+0x1e/0x46
May 19 09:53:45 ZIPPY kernel: [ 240.751887] [<ffffffff810b7e06>] ? __get_free_pages+0x6/0x42
May 19 09:53:45 ZIPPY kernel: [ 240.751927] [<ffffffff8114ecc0>] ? sysfs_read_file+0xa8/0x12e
May 19 09:53:45 ZIPPY kernel: [ 240.751967] [<ffffffff810f9f57>] ? vfs_read+0x9f/0xe6
May 19 09:53:45 ZIPPY kernel: [ 240.752005] [<ffffffff810f9fe3>] ? sys_read+0x45/0x6b
May 19 09:53:45 ZIPPY kernel: [ 240.752045] [<ffffffff813529d2>] ? system_call_fastpath+0x16/0x1b
May 19 09:53:45 ZIPPY kernel: [ 240.752087] INFO: task khubd:111 blocked for more than 120 seconds.
May 19 09:53:45 ZIPPY kernel: [ 240.752125] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 19 09:53:45 ZIPPY kernel: [ 240.752170] khubd D ffff88007fd13780 0 111 2 0x00000000
May 19 09:53:45 ZIPPY kernel: [ 240.752260] ffff880036868f60 0000000000000046 0000000000000000 ffff88007d3a20c0
May 19 09:53:45 ZIPPY kernel: [ 240.752407] 0000000000013780 ffff880036c17fd8 ffff880036c17fd8 ffff880036868f60
May 19 09:53:45 ZIPPY kernel: [ 240.755047] 0000000000000246 000000018134da04 ffffffffa008f1c0 ffff880036facd40
May 19 09:53:45 ZIPPY kernel: [ 240.755194] Call Trace:
May 19 09:53:45 ZIPPY kernel: [ 240.755235] [<ffffffffa007d452>] ? usb_kill_urb+0xa2/0xbe [usbcore]
May 19 09:53:45 ZIPPY kernel: [ 240.755276] [<ffffffff8105f97b>] ? add_wait_queue+0x3c/0x3c
May 19 09:53:45 ZIPPY kernel: [ 240.755319] [<ffffffffa007defb>] ? usb_start_wait_urb+0x7f/0xbe [usbcore]
May 19 09:53:45 ZIPPY kernel: [ 240.755360] [<ffffffff810ebed5>] ? __kmalloc+0x100/0x112
May 19 09:53:45 ZIPPY kernel: [ 240.755402] [<ffffffffa007e15e>] ? usb_control_msg+0xda/0x105 [usbcore]
May 19 09:53:45 ZIPPY kernel: [ 240.755442] [<ffffffff810ebfa5>] ? kmem_cache_alloc_trace+0xbe/0xce
May 19 09:53:45 ZIPPY kernel: [ 240.755484] [<ffffffffa0077d36>] ? hub_port_init+0x247/0x673 [usbcore]
May 19 09:53:45 ZIPPY kernel: [ 240.755527] [<ffffffffa007a1b8>] ? hub_thread+0x7fa/0xe7e [usbcore]
May 19 09:53:45 ZIPPY kernel: [ 240.755567] [<ffffffff81037ed3>] ? set_next_entity+0x32/0x55
May 19 09:53:45 ZIPPY kernel: [ 240.755607] [<ffffffff8105f97b>] ? add_wait_queue+0x3c/0x3c
May 19 09:53:45 ZIPPY kernel: [ 240.755648] [<ffffffffa00799be>] ? usb_remote_wakeup+0x2f/0x2f [usbcore]
May 19 09:53:45 ZIPPY kernel: [ 240.755688] [<ffffffff8105f329>] ? kthread+0x76/0x7e
May 19 09:53:45 ZIPPY kernel: [ 240.755727] [<ffffffff81354b34>] ? kernel_thread_helper+0x4/0x10
May 19 09:53:45 ZIPPY kernel: [ 240.755767] [<ffffffff8105f2b3>] ? kthread_worker_fn+0x139/0x139
May 19 09:53:45 ZIPPY kernel: [ 240.755805] [<ffffffff81354b30>] ? gs_change+0x13/0x13
May 19 09:53:45 ZIPPY kernel: [ 241.984541] microcode: CPU0: family 15 not supported
May 19 09:53:45 ZIPPY kernel: [ 241.984749] microcode: CPU1: family 15 not supported
May 19 09:53:45 ZIPPY kernel: [ 241.984854] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
May 19 09:53:45 ZIPPY kernel: [ 252.108002] PM: Starting manual resume from disk
May 19 09:53:45 ZIPPY kernel: [ 252.108051] PM: Hibernation image partition 8:5 present
May 19 09:53:45 ZIPPY kernel: [ 252.108053] PM: Looking for hibernation image.
May 19 09:53:45 ZIPPY kernel: [ 252.107872] PM: Image not found (code -22)
May 19 09:53:45 ZIPPY kernel: [ 252.107872] PM: Hibernation image not present or could not be loaded.
May 19 09:53:45 ZIPPY kernel: [ 252.168745] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May 19 09:53:45 ZIPPY kernel: [ 315.508512] EXT4-fs (sda1): re-mounted. Opts: (null)
May 19 09:53:45 ZIPPY kernel: [ 315.891801] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,errors=remount-ro
May 19 09:53:45 ZIPPY kernel: [ 316.316218] loop: module loaded
May 19 09:53:45 ZIPPY kernel: [ 318.184837] RPC: Registered named UNIX socket transport module.
May 19 09:53:45 ZIPPY kernel: [ 318.184837] RPC: Registered udp transport module.
May 19 09:53:45 ZIPPY kernel: [ 318.184837] RPC: Registered tcp transport module.
May 19 09:53:45 ZIPPY kernel: [ 318.184837] RPC: Registered tcp NFSv4.1 backchannel transport module.
May 19 09:53:45 ZIPPY kernel: [ 318.252259] FS-Cache: Loaded
May 19 09:53:45 ZIPPY kernel: [ 318.330958] FS-Cache: Netfs 'nfs' registered for caching
May 19 09:53:45 ZIPPY kernel: [ 318.368769] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Last edited by mr_marmalade on 2013-05-19 13:41, edited 4 times in total.
-
mr_marmalade
- Posts: 16
- Joined: 2011-02-10 22:23
Re: Debian Wheezy won't reboot.
Part 2 of syslog (Note: I rebooted after the multiple INIT respawn messages after 720 seconds):
One possible thing is that the last line is no longer the "modem-manager: Caught signal 15, shutting down..." one as per when it fails to reboot, it is the "acpid: exiting" one, even although I was booting with acpi=off. Perhaps the order of these matters?
Booting into recovery mode & requesting to reboot doesn't work.
Any more ideas?
Code: Select all
May 19 09:53:45 ZIPPY acpid: cannot open input layer
May 19 09:53:45 ZIPPY acpid: inotify_add_watch() failed: No such file or directory (2)
May 19 09:53:45 ZIPPY acpid: starting up with netlink and the input layer
May 19 09:53:45 ZIPPY acpid: 1 rule loaded
May 19 09:53:45 ZIPPY acpid: waiting for events: event logging is off
May 19 09:53:46 ZIPPY anacron[1878]: Anacron 2.3 started on 2013-05-19
May 19 09:53:46 ZIPPY anacron[1878]: Normal exit (0 jobs run)
May 19 09:53:46 ZIPPY /usr/sbin/cron[1922]: (CRON) INFO (pidfile fd = 3)
May 19 09:53:46 ZIPPY /usr/sbin/cron[1923]: (CRON) STARTUP (fork ok)
May 19 09:53:46 ZIPPY /usr/sbin/cron[1923]: (CRON) INFO (Running @reboot jobs)
May 19 09:53:49 ZIPPY avahi-daemon[2222]: Found user 'avahi' (UID 105) and group 'avahi' (GID 112).
May 19 09:53:49 ZIPPY avahi-daemon[2222]: Successfully dropped root privileges.
May 19 09:53:49 ZIPPY avahi-daemon[2222]: avahi-daemon 0.6.31 starting up.
May 19 09:53:49 ZIPPY avahi-daemon[2222]: Successfully called chroot().
May 19 09:53:49 ZIPPY avahi-daemon[2222]: Successfully dropped remaining capabilities.
May 19 09:53:49 ZIPPY avahi-daemon[2222]: Loading service file /services/udisks.service.
May 19 09:53:49 ZIPPY avahi-daemon[2222]: Network interface enumeration completed.
May 19 09:53:49 ZIPPY avahi-daemon[2222]: Registering HINFO record with values 'X86_64'/'LINUX'.
May 19 09:53:49 ZIPPY avahi-daemon[2222]: Server startup complete. Host name is ZIPPY.local. Local service cookie is 4275394715.
May 19 09:53:49 ZIPPY avahi-daemon[2222]: Service "ZIPPY" (/services/udisks.service) successfully established.
May 19 09:53:50 ZIPPY NetworkManager[2271]: <info> NetworkManager (version 0.9.4.0) is starting...
May 19 09:53:50 ZIPPY NetworkManager[2271]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
May 19 09:53:50 ZIPPY NetworkManager[2271]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
May 19 09:53:50 ZIPPY NetworkManager[2271]: <info> VPN: loaded org.freedesktop.NetworkManager.openvpn
May 19 09:53:50 ZIPPY NetworkManager[2271]: <info> VPN: loaded org.freedesktop.NetworkManager.vpnc
May 19 09:53:50 ZIPPY dbus[2187]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
May 19 09:53:50 ZIPPY polkitd[2328]: started daemon version 0.105 using authority implementation `local' version `0.105'
May 19 09:53:50 ZIPPY dbus[2187]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPlugin-Ifupdown: init!
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPlugin-Ifupdown: update_system_hostname
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPluginIfupdown: guessed connection type (eth0) = 802-3-ethernet
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPlugin-Ifupdown: update_connection_setting_from_if_block: name:eth0, type:802-3-ethernet, id:Ifupdown (eth0), uuid: 681b428f-beaf-8932-dce4-687ed5bae28e
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPlugin-Ifupdown: adding eth0 to iface_connections
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPlugin-Ifupdown: adding iface eth0 to well_known_interfaces
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPlugin-Ifupdown: autoconnect
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPluginIfupdown: management mode: unmanaged
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:0e.0/0000:02:0d.0/net/eth0, iface: eth0)
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPluginIfupdown: locking wired connection setting
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPlugin-Ifupdown: end _init.
May 19 09:53:50 ZIPPY NetworkManager[2271]: <info> Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list.
May 19 09:53:50 ZIPPY NetworkManager[2271]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
May 19 09:53:50 ZIPPY NetworkManager[2271]: Ifupdown: get unmanaged devices count: 1
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPlugin-Ifupdown: (34878256) ... get_connections.
May 19 09:53:50 ZIPPY NetworkManager[2271]: SCPlugin-Ifupdown: (34878256) ... get_connections (managed=false): return empty list.
May 19 09:53:50 ZIPPY NetworkManager[2271]: Ifupdown: get unmanaged devices count: 1
May 19 09:53:50 ZIPPY NetworkManager[2271]: <info> trying to start the modem manager...
May 19 09:53:50 ZIPPY dbus[2187]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper)
May 19 09:53:50 ZIPPY NetworkManager[2271]: <info> monitoring kernel firmware directory '/lib/firmware'.
May 19 09:53:50 ZIPPY NetworkManager[2271]: <info> monitoring ifupdown state file '/run/network/ifstate'.
May 19 09:53:51 ZIPPY NetworkManager[2271]: <info> WiFi enabled by radio killswitch; enabled by state file
May 19 09:53:51 ZIPPY NetworkManager[2271]: <info> WWAN enabled by radio killswitch; enabled by state file
May 19 09:53:51 ZIPPY NetworkManager[2271]: <info> WiMAX enabled by radio killswitch; enabled by state file
May 19 09:53:51 ZIPPY NetworkManager[2271]: <info> Networking is enabled by state file
May 19 09:53:51 ZIPPY NetworkManager[2271]: <warn> failed to allocate link cache: (-10) Operation not supported
May 19 09:53:51 ZIPPY NetworkManager[2271]: <info> (eth0): carrier is OFF
May 19 09:53:51 ZIPPY NetworkManager[2271]: <info> (eth0): new Ethernet device (driver: 'r8169' ifindex: 2)
May 19 09:53:51 ZIPPY NetworkManager[2271]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
May 19 09:53:51 ZIPPY NetworkManager[2271]: <warn> bluez error getting default adapter: The name org.bluez was not provided by any .service files
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> ModemManager (version 0.5.2.0) starting...
May 19 09:53:51 ZIPPY dbus[2187]: [system] Successfully activated service 'org.freedesktop.ModemManager'
May 19 09:53:51 ZIPPY NetworkManager[2271]: <info> modem-manager is now available
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Wavecom
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin AnyData
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Gobi
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Longcheer
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Novatel
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Option
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Samsung
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Ericsson MBM
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Generic
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Linktop
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Nokia
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin SimTech
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin X22X
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Option High-Speed
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Sierra
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin Huawei
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin MotoC
May 19 09:53:51 ZIPPY modem-manager[2337]: <info> Loaded plugin ZTE
May 19 09:53:52 ZIPPY pulseaudio[2324]: [pulseaudio] main.c: Running in system mode, forcibly disabling SHM mode!
May 19 09:53:52 ZIPPY pulseaudio[2324]: [pulseaudio] main.c: Running in system mode, forcibly disabling exit idle time!
May 19 09:53:52 ZIPPY pulseaudio[2382]: [pulseaudio] main.c: OK, so you are running PA in system mode. Please note that you most likely shouldn't be doing that.
May 19 09:53:52 ZIPPY pulseaudio[2382]: [pulseaudio] main.c: If you do it nonetheless then it's your own fault if things don't work as expected.
May 19 09:53:52 ZIPPY pulseaudio[2382]: [pulseaudio] main.c: Please read http://pulseaudio.org/wiki/WhatIsWrongWithSystemMode for an explanation why system mode is usually a bad idea.
May 19 09:53:53 ZIPPY acpid: client connected from 2364[0:0]
May 19 09:53:53 ZIPPY acpid: 1 client rule loaded
May 19 09:53:53 ZIPPY kdm[2339]: X server died during startup
May 19 09:53:53 ZIPPY kdm[2339]: X server for display :0 cannot be started, session disabled
May 19 09:54:26 ZIPPY kernel: [ 360.762558] INFO: task udevd:62 blocked for more than 120 seconds.
May 19 09:54:26 ZIPPY kernel: [ 360.762601] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 19 09:54:26 ZIPPY kernel: [ 360.762647] udevd D ffff8800371b4340 0 62 1 0x00000000
May 19 09:54:26 ZIPPY kernel: [ 360.762738] ffff8800371b4340 0000000000000086 0000000000000000 ffff88003721ea70
May 19 09:54:26 ZIPPY kernel: [ 360.762885] 0000000000013780 ffff8800371fffd8 ffff8800371fffd8 ffff8800371b4340
May 19 09:54:26 ZIPPY kernel: [ 360.763032] ffff880037132180 0000001000000010 00000000000280d0 ffff880036c880e8
May 19 09:54:26 ZIPPY kernel: [ 360.763179] Call Trace:
May 19 09:54:26 ZIPPY kernel: [ 360.763221] [<ffffffff8134cfef>] ? __mutex_lock_common.isra.5+0xff/0x164
May 19 09:54:26 ZIPPY kernel: [ 360.763261] [<ffffffff8134cedd>] ? mutex_lock+0x1a/0x2d
May 19 09:54:26 ZIPPY kernel: [ 360.763311] [<ffffffffa0082841>] ? show_manufacturer+0x16/0x41 [usbcore]
May 19 09:54:26 ZIPPY kernel: [ 360.763353] [<ffffffff8124e5d3>] ? dev_attr_show+0x1e/0x46
May 19 09:54:26 ZIPPY kernel: [ 360.763392] [<ffffffff810b7e06>] ? __get_free_pages+0x6/0x42
May 19 09:54:26 ZIPPY kernel: [ 360.763432] [<ffffffff8114ecc0>] ? sysfs_read_file+0xa8/0x12e
May 19 09:54:26 ZIPPY kernel: [ 360.763471] [<ffffffff810f9f57>] ? vfs_read+0x9f/0xe6
May 19 09:54:26 ZIPPY kernel: [ 360.763510] [<ffffffff810f9fe3>] ? sys_read+0x45/0x6b
May 19 09:54:26 ZIPPY kernel: [ 360.763549] [<ffffffff813529d2>] ? system_call_fastpath+0x16/0x1b
May 19 09:54:26 ZIPPY kernel: [ 360.763588] INFO: task khubd:111 blocked for more than 120 seconds.
May 19 09:54:26 ZIPPY kernel: [ 360.763626] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 19 09:54:26 ZIPPY kernel: [ 360.763671] khubd D ffff88007fd13780 0 111 2 0x00000000
May 19 09:54:26 ZIPPY kernel: [ 360.763761] ffff880036868f60 0000000000000046 0000000000000000 ffff88007d3a20c0
May 19 09:54:26 ZIPPY kernel: [ 360.763908] 0000000000013780 ffff880036c17fd8 ffff880036c17fd8 ffff880036868f60
May 19 09:54:26 ZIPPY kernel: [ 360.764055] 0000000000000246 000000018134da04 ffffffffa008f1c0 ffff880036facd40
May 19 09:54:26 ZIPPY kernel: [ 360.764202] Call Trace:
May 19 09:54:26 ZIPPY kernel: [ 360.764243] [<ffffffffa007d452>] ? usb_kill_urb+0xa2/0xbe [usbcore]
May 19 09:54:26 ZIPPY kernel: [ 360.764284] [<ffffffff8105f97b>] ? add_wait_queue+0x3c/0x3c
May 19 09:54:26 ZIPPY kernel: [ 360.764327] [<ffffffffa007defb>] ? usb_start_wait_urb+0x7f/0xbe [usbcore]
May 19 09:54:26 ZIPPY kernel: [ 360.764368] [<ffffffff810ebed5>] ? __kmalloc+0x100/0x112
May 19 09:54:26 ZIPPY kernel: [ 360.764411] [<ffffffffa007e15e>] ? usb_control_msg+0xda/0x105 [usbcore]
May 19 09:54:26 ZIPPY kernel: [ 360.764451] [<ffffffff810ebfa5>] ? kmem_cache_alloc_trace+0xbe/0xce
May 19 09:54:26 ZIPPY kernel: [ 360.764494] [<ffffffffa0077d36>] ? hub_port_init+0x247/0x673 [usbcore]
May 19 09:54:26 ZIPPY kernel: [ 360.764537] [<ffffffffa007a1b8>] ? hub_thread+0x7fa/0xe7e [usbcore]
May 19 09:54:26 ZIPPY kernel: [ 360.764577] [<ffffffff81037ed3>] ? set_next_entity+0x32/0x55
May 19 09:54:26 ZIPPY kernel: [ 360.764616] [<ffffffff8105f97b>] ? add_wait_queue+0x3c/0x3c
May 19 09:54:26 ZIPPY kernel: [ 360.764658] [<ffffffffa00799be>] ? usb_remote_wakeup+0x2f/0x2f [usbcore]
May 19 09:54:26 ZIPPY kernel: [ 360.764699] [<ffffffff8105f329>] ? kthread+0x76/0x7e
May 19 09:54:26 ZIPPY kernel: [ 360.764738] [<ffffffff81354b34>] ? kernel_thread_helper+0x4/0x10
May 19 09:54:26 ZIPPY kernel: [ 360.764777] [<ffffffff8105f2b3>] ? kthread_worker_fn+0x139/0x139
May 19 09:54:26 ZIPPY kernel: [ 360.764816] [<ffffffff81354b30>] ? gs_change+0x13/0x13
May 19 09:55:33 ZIPPY init: Id "6" respawning too fast: disabled for 5 minutes
May 19 09:55:33 ZIPPY init: Id "1" respawning too fast: disabled for 5 minutes
May 19 09:55:33 ZIPPY init: Id "4" respawning too fast: disabled for 5 minutes
May 19 09:55:33 ZIPPY init: Id "5" respawning too fast: disabled for 5 minutes
May 19 09:55:33 ZIPPY init: Id "3" respawning too fast: disabled for 5 minutes
May 19 09:55:33 ZIPPY init: Id "2" respawning too fast: disabled for 5 minutes
May 19 09:55:33 ZIPPY init: no more processes left in this runlevel
May 19 09:56:26 ZIPPY kernel: [ 480.770057] INFO: task udevd:62 blocked for more than 120 seconds.
May 19 09:56:26 ZIPPY kernel: [ 480.770099] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 19 09:56:26 ZIPPY kernel: [ 480.770145] udevd D ffff8800371b4340 0 62 1 0x00000000
May 19 09:56:26 ZIPPY kernel: [ 480.770236] ffff8800371b4340 0000000000000086 0000000000000000 ffff88003721ea70
May 19 09:56:26 ZIPPY kernel: [ 480.770384] 0000000000013780 ffff8800371fffd8 ffff8800371fffd8 ffff8800371b4340
May 19 09:56:26 ZIPPY kernel: [ 480.770530] ffff880037132180 0000001000000010 00000000000280d0 ffff880036c880e8
May 19 09:56:26 ZIPPY kernel: [ 480.770677] Call Trace:
May 19 09:56:26 ZIPPY kernel: [ 480.770718] [<ffffffff8134cfef>] ? __mutex_lock_common.isra.5+0xff/0x164
May 19 09:56:26 ZIPPY kernel: [ 480.770758] [<ffffffff8134cedd>] ? mutex_lock+0x1a/0x2d
May 19 09:56:26 ZIPPY kernel: [ 480.770808] [<ffffffffa0082841>] ? show_manufacturer+0x16/0x41 [usbcore]
May 19 09:56:26 ZIPPY kernel: [ 480.770849] [<ffffffff8124e5d3>] ? dev_attr_show+0x1e/0x46
May 19 09:56:26 ZIPPY kernel: [ 480.770888] [<ffffffff810b7e06>] ? __get_free_pages+0x6/0x42
May 19 09:56:26 ZIPPY kernel: [ 480.770928] [<ffffffff8114ecc0>] ? sysfs_read_file+0xa8/0x12e
May 19 09:56:26 ZIPPY kernel: [ 480.770967] [<ffffffff810f9f57>] ? vfs_read+0x9f/0xe6
May 19 09:56:26 ZIPPY kernel: [ 480.771005] [<ffffffff810f9fe3>] ? sys_read+0x45/0x6b
May 19 09:56:26 ZIPPY kernel: [ 480.774061] [<ffffffff813529d2>] ? system_call_fastpath+0x16/0x1b
May 19 09:56:26 ZIPPY kernel: [ 480.774103] INFO: task khubd:111 blocked for more than 120 seconds.
May 19 09:56:26 ZIPPY kernel: [ 480.776068] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 19 09:56:26 ZIPPY kernel: [ 480.776068] khubd D ffff88007fd13780 0 111 2 0x00000000
May 19 09:56:26 ZIPPY kernel: [ 480.776068] ffff880036868f60 0000000000000046 0000000000000000 ffff88007d3a20c0
May 19 09:56:26 ZIPPY kernel: [ 480.776068] 0000000000013780 ffff880036c17fd8 ffff880036c17fd8 ffff880036868f60
May 19 09:56:26 ZIPPY kernel: [ 480.776068] 0000000000000246 000000018134da04 ffffffffa008f1c0 ffff880036facd40
May 19 09:56:26 ZIPPY kernel: [ 480.776068] Call Trace:
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffffa007d452>] ? usb_kill_urb+0xa2/0xbe [usbcore]
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffff8105f97b>] ? add_wait_queue+0x3c/0x3c
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffffa007defb>] ? usb_start_wait_urb+0x7f/0xbe [usbcore]
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffff810ebed5>] ? __kmalloc+0x100/0x112
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffffa007e15e>] ? usb_control_msg+0xda/0x105 [usbcore]
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffff810ebfa5>] ? kmem_cache_alloc_trace+0xbe/0xce
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffffa0077d36>] ? hub_port_init+0x247/0x673 [usbcore]
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffffa007a1b8>] ? hub_thread+0x7fa/0xe7e [usbcore]
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffff81037ed3>] ? set_next_entity+0x32/0x55
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffff8105f97b>] ? add_wait_queue+0x3c/0x3c
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffffa00799be>] ? usb_remote_wakeup+0x2f/0x2f [usbcore]
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffff8105f329>] ? kthread+0x76/0x7e
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffff81354b34>] ? kernel_thread_helper+0x4/0x10
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffff8105f2b3>] ? kthread_worker_fn+0x139/0x139
May 19 09:56:26 ZIPPY kernel: [ 480.776068] [<ffffffff81354b30>] ? gs_change+0x13/0x13
May 19 09:58:26 ZIPPY kernel: [ 600.781564] INFO: task udevd:62 blocked for more than 120 seconds.
May 19 09:58:26 ZIPPY kernel: [ 600.781605] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 19 09:58:26 ZIPPY kernel: [ 600.781650] udevd D ffff8800371b4340 0 62 1 0x00000000
May 19 09:58:26 ZIPPY kernel: [ 600.781741] ffff8800371b4340 0000000000000086 0000000000000000 ffff88003721ea70
May 19 09:58:26 ZIPPY kernel: [ 600.781888] 0000000000013780 ffff8800371fffd8 ffff8800371fffd8 ffff8800371b4340
May 19 09:58:26 ZIPPY kernel: [ 600.782035] ffff880037132180 0000001000000010 00000000000280d0 ffff880036c880e8
May 19 09:58:26 ZIPPY kernel: [ 600.782182] Call Trace:
May 19 09:58:26 ZIPPY kernel: [ 600.782222] [<ffffffff8134cfef>] ? __mutex_lock_common.isra.5+0xff/0x164
May 19 09:58:26 ZIPPY kernel: [ 600.782262] [<ffffffff8134cedd>] ? mutex_lock+0x1a/0x2d
May 19 09:58:26 ZIPPY kernel: [ 600.782309] [<ffffffffa0082841>] ? show_manufacturer+0x16/0x41 [usbcore]
May 19 09:58:26 ZIPPY kernel: [ 600.782350] [<ffffffff8124e5d3>] ? dev_attr_show+0x1e/0x46
May 19 09:58:26 ZIPPY kernel: [ 600.782389] [<ffffffff810b7e06>] ? __get_free_pages+0x6/0x42
May 19 09:58:26 ZIPPY kernel: [ 600.782429] [<ffffffff8114ecc0>] ? sysfs_read_file+0xa8/0x12e
May 19 09:58:26 ZIPPY kernel: [ 600.782468] [<ffffffff810f9f57>] ? vfs_read+0x9f/0xe6
May 19 09:58:26 ZIPPY kernel: [ 600.782506] [<ffffffff810f9fe3>] ? sys_read+0x45/0x6b
May 19 09:58:26 ZIPPY kernel: [ 600.782545] [<ffffffff813529d2>] ? system_call_fastpath+0x16/0x1b
May 19 09:58:26 ZIPPY kernel: [ 600.782584] INFO: task khubd:111 blocked for more than 120 seconds.
May 19 09:58:26 ZIPPY kernel: [ 600.782622] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 19 09:58:26 ZIPPY kernel: [ 600.782667] khubd D ffff88007fd13780 0 111 2 0x00000000
May 19 09:58:26 ZIPPY kernel: [ 600.782757] ffff880036868f60 0000000000000046 0000000000000000 ffff88007d3a20c0
May 19 09:58:26 ZIPPY kernel: [ 600.782904] 0000000000013780 ffff880036c17fd8 ffff880036c17fd8 ffff880036868f60
May 19 09:58:26 ZIPPY kernel: [ 600.783051] 0000000000000246 000000018134da04 ffffffffa008f1c0 ffff880036facd40
May 19 09:58:26 ZIPPY kernel: [ 600.783197] Call Trace:
May 19 09:58:26 ZIPPY kernel: [ 600.783238] [<ffffffffa007d452>] ? usb_kill_urb+0xa2/0xbe [usbcore]
May 19 09:58:26 ZIPPY kernel: [ 600.783279] [<ffffffff8105f97b>] ? add_wait_queue+0x3c/0x3c
May 19 09:58:26 ZIPPY kernel: [ 600.783322] [<ffffffffa007defb>] ? usb_start_wait_urb+0x7f/0xbe [usbcore]
May 19 09:58:26 ZIPPY kernel: [ 600.783363] [<ffffffff810ebed5>] ? __kmalloc+0x100/0x112
May 19 09:58:26 ZIPPY kernel: [ 600.783405] [<ffffffffa007e15e>] ? usb_control_msg+0xda/0x105 [usbcore]
May 19 09:58:26 ZIPPY kernel: [ 600.783446] [<ffffffff810ebfa5>] ? kmem_cache_alloc_trace+0xbe/0xce
May 19 09:58:26 ZIPPY kernel: [ 600.783488] [<ffffffffa0077d36>] ? hub_port_init+0x247/0x673 [usbcore]
May 19 09:58:26 ZIPPY kernel: [ 600.783531] [<ffffffffa007a1b8>] ? hub_thread+0x7fa/0xe7e [usbcore]
May 19 09:58:26 ZIPPY kernel: [ 600.783572] [<ffffffff81037ed3>] ? set_next_entity+0x32/0x55
May 19 09:58:26 ZIPPY kernel: [ 600.783611] [<ffffffff8105f97b>] ? add_wait_queue+0x3c/0x3c
May 19 09:58:26 ZIPPY kernel: [ 600.783653] [<ffffffffa00799be>] ? usb_remote_wakeup+0x2f/0x2f [usbcore]
May 19 09:58:26 ZIPPY kernel: [ 600.783693] [<ffffffff8105f329>] ? kthread+0x76/0x7e
May 19 09:58:26 ZIPPY kernel: [ 600.783731] [<ffffffff81354b34>] ? kernel_thread_helper+0x4/0x10
May 19 09:58:26 ZIPPY kernel: [ 600.783771] [<ffffffff8105f2b3>] ? kthread_worker_fn+0x139/0x139
May 19 09:58:26 ZIPPY kernel: [ 600.783809] [<ffffffff81354b30>] ? gs_change+0x13/0x13
May 19 10:00:26 ZIPPY kernel: [ 720.789064] INFO: task udevd:62 blocked for more than 120 seconds.
May 19 10:00:26 ZIPPY kernel: [ 720.789104] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 19 10:00:26 ZIPPY kernel: [ 720.789150] udevd D ffff8800371b4340 0 62 1 0x00000000
May 19 10:00:26 ZIPPY kernel: [ 720.789240] ffff8800371b4340 0000000000000086 0000000000000000 ffff88003721ea70
May 19 10:00:26 ZIPPY kernel: [ 720.789388] 0000000000013780 ffff8800371fffd8 ffff8800371fffd8 ffff8800371b4340
May 19 10:00:26 ZIPPY kernel: [ 720.789534] ffff880037132180 0000001000000010 00000000000280d0 ffff880036c880e8
May 19 10:00:26 ZIPPY kernel: [ 720.789681] Call Trace:
May 19 10:00:26 ZIPPY kernel: [ 720.789720] [<ffffffff8134cfef>] ? __mutex_lock_common.isra.5+0xff/0x164
May 19 10:00:26 ZIPPY kernel: [ 720.789760] [<ffffffff8134cedd>] ? mutex_lock+0x1a/0x2d
May 19 10:00:26 ZIPPY kernel: [ 720.789806] [<ffffffffa0082841>] ? show_manufacturer+0x16/0x41 [usbcore]
May 19 10:00:26 ZIPPY kernel: [ 720.789847] [<ffffffff8124e5d3>] ? dev_attr_show+0x1e/0x46
May 19 10:00:26 ZIPPY kernel: [ 720.789886] [<ffffffff810b7e06>] ? __get_free_pages+0x6/0x42
May 19 10:00:26 ZIPPY kernel: [ 720.789925] [<ffffffff8114ecc0>] ? sysfs_read_file+0xa8/0x12e
May 19 10:00:26 ZIPPY kernel: [ 720.789965] [<ffffffff810f9f57>] ? vfs_read+0x9f/0xe6
May 19 10:00:26 ZIPPY kernel: [ 720.790002] [<ffffffff810f9fe3>] ? sys_read+0x45/0x6b
May 19 10:00:26 ZIPPY kernel: [ 720.790042] [<ffffffff813529d2>] ? system_call_fastpath+0x16/0x1b
May 19 10:00:26 ZIPPY kernel: [ 720.790080] INFO: task khubd:111 blocked for more than 120 seconds.
May 19 10:00:26 ZIPPY kernel: [ 720.790118] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 19 10:00:26 ZIPPY kernel: [ 720.790163] khubd D ffff88007fd13780 0 111 2 0x00000000
May 19 10:00:26 ZIPPY kernel: [ 720.790253] ffff880036868f60 0000000000000046 0000000000000000 ffff88007d3a20c0
May 19 10:00:26 ZIPPY kernel: [ 720.790400] 0000000000013780 ffff880036c17fd8 ffff880036c17fd8 ffff880036868f60
May 19 10:00:26 ZIPPY kernel: [ 720.790547] 0000000000000246 000000018134da04 ffffffffa008f1c0 ffff880036facd40
May 19 10:00:26 ZIPPY kernel: [ 720.790693] Call Trace:
May 19 10:00:26 ZIPPY kernel: [ 720.790734] [<ffffffffa007d452>] ? usb_kill_urb+0xa2/0xbe [usbcore]
May 19 10:00:26 ZIPPY kernel: [ 720.790775] [<ffffffff8105f97b>] ? add_wait_queue+0x3c/0x3c
May 19 10:00:26 ZIPPY kernel: [ 720.790818] [<ffffffffa007defb>] ? usb_start_wait_urb+0x7f/0xbe [usbcore]
May 19 10:00:26 ZIPPY kernel: [ 720.790858] [<ffffffff810ebed5>] ? __kmalloc+0x100/0x112
May 19 10:00:26 ZIPPY kernel: [ 720.790901] [<ffffffffa007e15e>] ? usb_control_msg+0xda/0x105 [usbcore]
May 19 10:00:26 ZIPPY kernel: [ 720.790941] [<ffffffff810ebfa5>] ? kmem_cache_alloc_trace+0xbe/0xce
May 19 10:00:26 ZIPPY kernel: [ 720.790983] [<ffffffffa0077d36>] ? hub_port_init+0x247/0x673 [usbcore]
May 19 10:00:26 ZIPPY kernel: [ 720.791026] [<ffffffffa007a1b8>] ? hub_thread+0x7fa/0xe7e [usbcore]
May 19 10:00:26 ZIPPY kernel: [ 720.791066] [<ffffffff81037ed3>] ? set_next_entity+0x32/0x55
May 19 10:00:26 ZIPPY kernel: [ 720.791105] [<ffffffff8105f97b>] ? add_wait_queue+0x3c/0x3c
May 19 10:00:26 ZIPPY kernel: [ 720.791148] [<ffffffffa00799be>] ? usb_remote_wakeup+0x2f/0x2f [usbcore]
May 19 10:00:26 ZIPPY kernel: [ 720.791188] [<ffffffff8105f329>] ? kthread+0x76/0x7e
May 19 10:00:26 ZIPPY kernel: [ 720.791226] [<ffffffff81354b34>] ? kernel_thread_helper+0x4/0x10
May 19 10:00:26 ZIPPY kernel: [ 720.791266] [<ffffffff8105f2b3>] ? kthread_worker_fn+0x139/0x139
May 19 10:00:26 ZIPPY kernel: [ 720.791305] [<ffffffff81354b30>] ? gs_change+0x13/0x13
May 19 10:02:14 ZIPPY init: Id "3" respawning too fast: disabled for 5 minutes
May 19 10:02:14 ZIPPY init: Id "6" respawning too fast: disabled for 5 minutes
May 19 10:02:14 ZIPPY init: Id "1" respawning too fast: disabled for 5 minutes
May 19 10:02:14 ZIPPY init: Id "2" respawning too fast: disabled for 5 minutes
May 19 10:02:14 ZIPPY init: Id "4" respawning too fast: disabled for 5 minutes
May 19 10:02:14 ZIPPY init: Id "5" respawning too fast: disabled for 5 minutes
May 19 10:08:55 ZIPPY init: Id "3" respawning too fast: disabled for 5 minutes
May 19 10:08:55 ZIPPY init: Id "6" respawning too fast: disabled for 5 minutes
May 19 10:08:55 ZIPPY init: Id "5" respawning too fast: disabled for 5 minutes
May 19 10:08:55 ZIPPY init: Id "4" respawning too fast: disabled for 5 minutes
May 19 10:08:55 ZIPPY init: Id "2" respawning too fast: disabled for 5 minutes
May 19 10:08:55 ZIPPY init: Id "1" respawning too fast: disabled for 5 minutes
May 19 10:15:36 ZIPPY init: Id "3" respawning too fast: disabled for 5 minutes
May 19 10:15:36 ZIPPY init: Id "6" respawning too fast: disabled for 5 minutes
May 19 10:15:36 ZIPPY init: Id "2" respawning too fast: disabled for 5 minutes
May 19 10:15:36 ZIPPY init: Id "5" respawning too fast: disabled for 5 minutes
May 19 10:15:36 ZIPPY init: Id "4" respawning too fast: disabled for 5 minutes
May 19 10:15:36 ZIPPY init: Id "1" respawning too fast: disabled for 5 minutes
May 19 10:15:56 ZIPPY shutdown[2649]: shutting down for system reboot
May 19 10:15:56 ZIPPY init: Switching to runlevel: 6
May 19 10:15:56 ZIPPY NetworkManager[2271]: <info> caught signal 15, shutting down normally.
May 19 10:15:56 ZIPPY NetworkManager[2271]: <warn> quit request received, terminating...
May 19 10:15:56 ZIPPY NetworkManager[2271]: <info> exiting (success)
May 19 10:15:56 ZIPPY avahi-daemon[2222]: Got SIGTERM, quitting.
May 19 10:15:57 ZIPPY avahi-daemon[2222]: avahi-daemon 0.6.31 exiting.
May 19 10:15:58 ZIPPY modem-manager[2337]: <info> Caught signal 15, shutting down...
May 19 10:15:58 ZIPPY acpid: exiting Booting into recovery mode & requesting to reboot doesn't work.
Any more ideas?
Last edited by mr_marmalade on 2013-05-20 10:39, edited 1 time in total.
-
confuseling
- Posts: 2121
- Joined: 2009-10-21 01:03
Re: Debian Wheezy won't reboot.
You could try disabling modem manager. Looks easily reversible enough...
http://forums.linuxmint.com/viewtopic.php?t=101010&f=42
It seems there are ways to blacklist certain hardware from modem manager's list of things to probe, which might be a more nuanced approach. But if you don't use modem manager, not that much point.
http://forums.linuxmint.com/viewtopic.php?t=101010&f=42
It seems there are ways to blacklist certain hardware from modem manager's list of things to probe, which might be a more nuanced approach. But if you don't use modem manager, not that much point.
The Forum's search box is terrible. Use site specific search, e.g.
https://www.google.com/search?q=site%3A ... terms+here
https://www.google.com/search?q=site%3A ... terms+here
-
mr_marmalade
- Posts: 16
- Joined: 2011-02-10 22:23
Re: Debian Wheezy won't reboot.
Hi, I've just now tried that; syslog now doesn't show the modem-manager line & "acpid: exiting" is the last line, but it doesn't reboot.
-
mr_marmalade
- Posts: 16
- Joined: 2011-02-10 22:23
Re: Debian Wheezy won't reboot.
I've tried further GRUB options of reboot=warm/cold/bios/smp/triple/kbd/acpi/efi/pci/force on separate boots; still rebooting fails. This was done after finding: https://bugs.launchpad.net/ubuntu/+sour ... bug/366682 and https://bugs.launchpad.net/linux/+bug/115011 and http://linux.koolsolutions.com/2009/08/ ... -restarts/
I've now checked through further log files, to try to find one that records all messages that are printed to the screen during boot/reboot/shutdown (note: I have removed GRUB's 'quiet' parameter so quite a lot get spewed out). There's at least one line after "[info] will now restart" that shows when rebooting but it vanishes too quickly to read. It had a timestamp of [300] but after looking through all the log files that were written to around the time of the reboot in /var/log, I cant find any lines that correspond to then, nor are there any interesting messages in there.
I've now checked through further log files, to try to find one that records all messages that are printed to the screen during boot/reboot/shutdown (note: I have removed GRUB's 'quiet' parameter so quite a lot get spewed out). There's at least one line after "[info] will now restart" that shows when rebooting but it vanishes too quickly to read. It had a timestamp of [300] but after looking through all the log files that were written to around the time of the reboot in /var/log, I cant find any lines that correspond to then, nor are there any interesting messages in there.
-
mr_marmalade
- Posts: 16
- Joined: 2011-02-10 22:23
Re: Debian Wheezy won't reboot.
I tried some BIOS setting & I've found a solution to the problem. By disabling Cool'n'Quiet the system can now reboot sucsessfully. I've tested it out on both the amd64 & i386 systems, both can now reboot. With C'n'Q disabled, both systems show this in dmesg:
I have already have the lastest & last BIOS update for my motherarboard. I would prefer to have C'n'Q enabled, but I guess I can live with it off until it is fixed or there's another workaround. This problem doesn't exist for me in Squeeze. Should I notify someone of this issue within Debian to try to get it fixed in Wheezy?
EDIT: I'm searching further about this issue, I'll mark the thread as solved.
EDIT: Also could try blacklisting the powernow-k8 module rather than disabling C'n'Q in the BIOS.
EDIT: 24/06/13: I just re-installed my Squeeze system & during the install chose to do the online packages update bit, so i think it updated to Devian 6.0.7. It now also exhibits the reboot failure problem, whereas my Squeeze system never had this issue before, so Debian must have back-ported this bug!? I blacklisted powernow-k8 to get round this issue for now.
Code: Select all
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
EDIT: I'm searching further about this issue, I'll mark the thread as solved.
EDIT: Also could try blacklisting the powernow-k8 module rather than disabling C'n'Q in the BIOS.
EDIT: 24/06/13: I just re-installed my Squeeze system & during the install chose to do the online packages update bit, so i think it updated to Devian 6.0.7. It now also exhibits the reboot failure problem, whereas my Squeeze system never had this issue before, so Debian must have back-ported this bug!? I blacklisted powernow-k8 to get round this issue for now.