[SOLVED] Ethernet Cable says it unplugged when its not

[topazkitty]

Hi, Everyone

I have just installed Debian Jessie for my parents computer since it is supposed to be released on the 25th of april. I am having a horrible time with Ethernet connectivity though. In wheezy my ethernet card worked no issues. Jessie, on the other hand does not recognize this ethernet card cable being plugged in when it is.

The ethernet cable works fine in bios and lights. It also does the same thing in debian rescue mode until it tries to detect network drivers. Then the ethernet light shuts off when network drivers are detected or until debian boots. I was able to get some internet on here with a proprietary wifi stick but it isn't really ideal.

I was wondering why debian isn't able to see that this ethernet card isn't plugged in any more.

Dmesg

Code: Select all

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=15db0415-1ece-49b9-b891-8267f238a59a ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f58ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f590000-0x000000007f5e2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f5e3000-0x000000007f5effff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f5f0000-0x000000007f5fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Dell Inc. Inspiron 530/0G679R, BIOS 1.0.16 12/12/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7f590 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CAFFF write-protect
[    0.000000]   CB000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 base 07F600000 mask FFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f3f00-0x000f3f0f] mapped at [ffff8800000f3f00]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7f200000-0x7f3fffff]
[    0.000000]  [mem 0x7f200000-0x7f3fffff] page 2M
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7c000000-0x7f1fffff]
[    0.000000]  [mem 0x7c000000-0x7f1fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x7bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x7f400000-0x7f58ffff]
[    0.000000]  [mem 0x7f400000-0x7f58ffff] page 4k
[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35c08000-0x36dfbfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F97A0 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x000000007F5E3080 000054 (v01 DELL   FX09     42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 0x000000007F5E7200 0000F4 (v03 DELL   FX09     42302E31 AWRD 00000000)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20140424/tbfadt-618)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20140424/tbfadt-618)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20140424/tbfadt-618)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/8 (20140424/tbfadt-618)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20140424/tbfadt-699)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20140424/tbfadt-699)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20140424/tbfadt-699)
[    0.000000] ACPI: DSDT 0x000000007F5E3200 003FFC (v01 DELL   AWRDACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x000000007F590000 000040
[    0.000000] ACPI: HPET 0x000000007F5E73C0 000038 (v01 DELL   FX09     42302E31 AWRD 00000098)
[    0.000000] ACPI: MCFG 0x000000007F5E7400 00003C (v01 DELL   FX09     42302E31 AWRD 00000000)
[    0.000000] ACPI: SLIC 0x000000007F5E7440 000176 (v01 DELL   FX09     42302E31 AWRD 00000000)
[    0.000000] ACPI: DMY2 0x000000007F5E75C0 000080 (v01 DELL   FX09     42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 0x000000007F5E7300 000084 (v01 DELL   FX09     42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f58ffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7f58ffff]
[    0.000000]   NODE_DATA [mem 0x7f58b000-0x7f58ffff]
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007cc00000-ffff88007e7fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x7f58ffff]
[    0.000000] On node 0 totalpages: 521517
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7076 pages used for memmap
[    0.000000]   DMA32 zone: 517520 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x7f800000-0x7fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 3 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007f200000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 514364
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=15db0415-1ece-49b9-b891-8267f238a59a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2026984K/2086068K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 59084K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]    RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2194.414 MHz processor
[    0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.82 BogoMIPS (lpj=8777656)
[    0.004016] pid_max: default: 32768 minimum: 301
[    0.004031] ACPI: Core revision 20140424
[    0.007301] ACPI: All ACPI Tables successfully acquired
[    0.008056] Security Framework initialized
[    0.008069] AppArmor: AppArmor disabled by boot time parameter
[    0.008070] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.012101] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.013174] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.013723] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.013730] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.014088] Initializing cgroup subsys memory
[    0.014101] Initializing cgroup subsys devices
[    0.014112] Initializing cgroup subsys freezer
[    0.014116] Initializing cgroup subsys net_cls
[    0.014123] Initializing cgroup subsys blkio
[    0.014129] Initializing cgroup subsys perf_event
[    0.014132] Initializing cgroup subsys net_prio
[    0.014170] mce: CPU supports 6 MCE banks
[    0.014180] CPU0: Thermal monitoring enabled (TM2)
[    0.014187] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[    0.021263] ftrace: allocating 21614 entries in 85 pages
[    0.028481] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068239] smpboot: CPU0: Intel(R) Celeron(R) CPU          450  @ 2.20GHz (fam: 06, model: 16, stepping: 01)
[    0.072000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.072000] ... version:                2
[    0.072000] ... bit width:              40
[    0.072000] ... generic registers:      2
[    0.072000] ... value mask:             000000ffffffffff
[    0.072000] ... max period:             000000007fffffff
[    0.072000] ... fixed-purpose events:   3
[    0.072000] ... event mask:             0000000700000003
[    0.072000] x86: Booted up 1 node, 1 CPUs
[    0.072000] smpboot: Total of 1 processors activated (4388.82 BogoMIPS)
[    0.072000] devtmpfs: initialized
[    0.078914] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.079186] PM: Registering ACPI NVS region [mem 0x7f590000-0x7f5e2fff] (339968 bytes)
[    0.080475] pinctrl core: initialized pinctrl subsystem
[    0.080593] NET: Registered protocol family 16
[    0.080762] cpuidle: using governor ladder
[    0.080766] cpuidle: using governor menu
[    0.080818] ACPI: bus type PCI registered
[    0.080822] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.080919] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.080922] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.081354] PCI: Using configuration type 1 for base access
[    0.082725] ACPI: Added _OSI(Module Device)
[    0.082729] ACPI: Added _OSI(Processor Device)
[    0.082731] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.082732] ACPI: Added _OSI(Processor Aggregator Device)
[    0.086398] ACPI: Interpreter enabled
[    0.086405] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.086411] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.086425] ACPI: (supports S0 S3 S4 S5)
[    0.086427] ACPI: Using IOAPIC for interrupt routing
[    0.086466] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.090943] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.090952] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.090960] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.091256] PCI host bridge to bus 0000:00
[    0.091260] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.091263] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.091265] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.091268] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.091270] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.091272] pci_bus 0000:00: root bus resource [mem 0x7f600000-0xfebfffff]
[    0.091283] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.091407] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[    0.091451] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.091546] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
[    0.091558] pci 0000:00:02.0: reg 0x10: [mem 0xfdf00000-0xfdf7ffff]
[    0.091563] pci 0000:00:02.0: reg 0x14: [io  0xff00-0xff07]
[    0.091569] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.091575] pci 0000:00:02.0: reg 0x1c: [mem 0xfdb00000-0xfdbfffff]
[    0.091715] pci 0000:00:19.0: [8086:10c0] type 00 class 0x020000
[    0.091733] pci 0000:00:19.0: reg 0x10: [mem 0xfdfc0000-0xfdfdffff]
[    0.091742] pci 0000:00:19.0: reg 0x14: [mem 0xfdfff000-0xfdffffff]
[    0.091750] pci 0000:00:19.0: reg 0x18: [io  0xfe00-0xfe1f]
[    0.091810] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.091866] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.091920] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.091961] pci 0000:00:1a.0: reg 0x20: [io  0xfd00-0xfd1f]
[    0.092064] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.092122] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.092164] pci 0000:00:1a.1: reg 0x20: [io  0xfc00-0xfc1f]
[    0.092251] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.092304] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.092345] pci 0000:00:1a.2: reg 0x20: [io  0xfb00-0xfb1f]
[    0.092430] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.092492] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.092513] pci 0000:00:1a.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff]
[    0.092600] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.092657] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.092713] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.092731] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
[    0.092801] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.092859] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.092914] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.092955] pci 0000:00:1d.0: reg 0x20: [io  0xfa00-0xfa1f]
[    0.093040] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.093092] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.093133] pci 0000:00:1d.1: reg 0x20: [io  0xf900-0xf91f]
[    0.093220] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.093274] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.093315] pci 0000:00:1d.2: reg 0x20: [io  0xf800-0xf81f]
[    0.093399] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.093461] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.093482] pci 0000:00:1d.7: reg 0x10: [mem 0xfdffd000-0xfdffd3ff]
[    0.093569] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.093626] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.093679] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.093772] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.093828] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[    0.093905] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.093910] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.093914] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[    0.093917] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
[    0.094040] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
[    0.094056] pci 0000:00:1f.2: reg 0x10: [io  0xf700-0xf707]
[    0.094064] pci 0000:00:1f.2: reg 0x14: [io  0xf600-0xf603]
[    0.094072] pci 0000:00:1f.2: reg 0x18: [io  0xf500-0xf507]
[    0.094080] pci 0000:00:1f.2: reg 0x1c: [io  0xf400-0xf403]
[    0.094087] pci 0000:00:1f.2: reg 0x20: [io  0xf300-0xf30f]
[    0.094095] pci 0000:00:1f.2: reg 0x24: [io  0xf200-0xf20f]
[    0.094218] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.094234] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffc000-0xfdffc0ff 64bit]
[    0.094254] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.094364] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[    0.094380] pci 0000:00:1f.5: reg 0x10: [io  0xf000-0xf007]
[    0.094387] pci 0000:00:1f.5: reg 0x14: [io  0xef00-0xef03]
[    0.094395] pci 0000:00:1f.5: reg 0x18: [io  0xee00-0xee07]
[    0.094403] pci 0000:00:1f.5: reg 0x1c: [io  0xed00-0xed03]
[    0.094410] pci 0000:00:1f.5: reg 0x20: [io  0xec00-0xec0f]
[    0.094418] pci 0000:00:1f.5: reg 0x24: [io  0xeb00-0xeb0f]
[    0.094583] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.094587] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.094590] pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.094595] pci 0000:00:01.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.094646] pci 0000:02:00.0: [14f1:2f20] type 00 class 0x078000
[    0.094663] pci 0000:02:00.0: reg 0x10: [mem 0xfddf0000-0xfddfffff]
[    0.094672] pci 0000:02:00.0: reg 0x14: [io  0xdf00-0xdf07]
[    0.094735] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.094824] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.094828] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.094832] pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.094838] pci 0000:00:1e.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.094840] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.094843] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.094845] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.094847] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.094849] pci 0000:00:1e.0:   bridge window [mem 0x7f600000-0xfebfffff] (subtractive decode)
[    0.095436] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.095504] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.095569] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.095633] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.095697] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.095760] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[    0.095823] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.095887] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.096018] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.096184] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.096187] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.096191] vgaarb: loaded
[    0.096193] vgaarb: bridge control possible 0000:00:02.0
[    0.096272] PCI: Using ACPI for IRQ routing
[    0.102141] PCI: pci_cache_line_size set to 64 bytes
[    0.102191] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.102194] e820: reserve RAM buffer [mem 0x7f590000-0x7fffffff]
[    0.102375] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.102380] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.102385] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.104087] Switched to clocksource hpet
[    0.111027] pnp: PnP ACPI init
[    0.111045] ACPI: bus type PNP registered
[    0.111231] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.111235] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.111237] system 00:00: [io  0x0290-0x0297] has been reserved
[    0.111240] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.111244] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.111348] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.111518] pnp 00:02: [dma 2]
[    0.111570] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.111681] system 00:03: [io  0x0400-0x04bf] could not be reserved
[    0.111686] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.111938] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.111942] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.112106] system 00:05: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.112110] system 00:05: [mem 0x7f600000-0x7f6fffff] has been reserved
[    0.112113] system 00:05: [mem 0xfed00000-0xfed000ff] has been reserved
[    0.112115] system 00:05: [mem 0x7f590000-0x7f5fffff] could not be reserved
[    0.112118] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.112121] system 00:05: [mem 0x00100000-0x7f58ffff] could not be reserved
[    0.112123] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.112126] system 00:05: [mem 0xfed14000-0xfed1dfff] has been reserved
[    0.112128] system 00:05: [mem 0xfed20000-0xfed9ffff] has been reserved
[    0.112131] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.112133] system 00:05: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.112136] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved
[    0.112138] system 00:05: [mem 0x000e0000-0x000effff] has been reserved
[    0.112142] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.112152] pnp: PnP ACPI: found 6 devices
[    0.112154] ACPI: bus type PNP unregistered
[    0.118996] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.119003] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.119007] pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.119011] pci 0000:00:01.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.119016] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.119018] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.119023] pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.119027] pci 0000:00:1e.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.119034] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.119036] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.119038] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.119040] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.119042] pci_bus 0000:00: resource 8 [mem 0x7f600000-0xfebfffff]
[    0.119044] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.119046] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.119049] pci_bus 0000:01: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.119051] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.119053] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.119055] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.119057] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.119059] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.119061] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.119063] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[    0.119065] pci_bus 0000:02: resource 8 [mem 0x7f600000-0xfebfffff]
[    0.119106] NET: Registered protocol family 2
[    0.119361] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.119426] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.119509] TCP: Hash tables configured (established 16384 bind 16384)
[    0.119577] TCP: reno registered
[    0.119589] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.119609] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.119734] NET: Registered protocol family 1
[    0.119764] pci 0000:00:02.0: Video device with shadowed ROM
[    0.120916] PCI: CLS 64 bytes, default 64
[    0.120981] Unpacking initramfs...
[    0.512662] Freeing initrd memory: 18384K (ffff880035c08000 - ffff880036dfc000)
[    0.512883] microcode: CPU0 sig=0x10661, pf=0x1, revision=0x38
[    0.512951] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.513299] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.513348] audit: initializing netlink subsys (disabled)
[    0.513373] audit: type=2000 audit(1429750400.512:1): initialized
[    0.513743] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.513771] zbud: loaded
[    0.513934] VFS: Disk quotas dquot_6.5.2
[    0.513952] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.514026] msgmni has been set to 3994
[    0.514392] alg: No test for stdrng (krng)
[    0.514426] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.514487] io scheduler noop registered
[    0.514491] io scheduler deadline registered
[    0.514527] io scheduler cfq registered (default)
[    0.514730] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.514834] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.514855] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.514881] intel_idle: does not run on family 6 model 22
[    0.514923] GHES: HEST is not enabled!
[    0.515040] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.515559] Linux agpgart interface v0.103
[    0.515615] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[    0.515637] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    0.515703] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.515824] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.515936] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.516373] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.516382] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.516553] mousedev: PS/2 mouse device common for all mice
[    0.516624] rtc_cmos 00:01: RTC can wake from S4
[    0.516764] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.516791] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.516815] ledtrig-cpu: registered to indicate activity on CPUs
[    0.517118] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.517120] AMD IOMMUv2 functionality not available on this system
[    0.517228] TCP: cubic registered
[    0.517250] NET: Registered protocol family 10
[    0.517513] mip6: Mobile IPv6
[    0.517519] NET: Registered protocol family 17
[    0.517527] mpls_gso: MPLS GSO support
[    0.517884] registered taskstats version 1
[    0.518305] rtc_cmos 00:01: setting system clock to 2015-04-23 00:53:20 UTC (1429750400)
[    0.518372] PM: Hibernation image not present or could not be loaded.
[    0.519578] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    0.519584] Write protecting the kernel read-only data: 8192k
[    0.522282] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[    0.522926] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    0.540267] systemd-udevd[54]: starting version 215
[    0.540738] random: systemd-udevd urandom read with 1 bits of entropy available
[    0.561729] pps_core: LinuxPPS API ver. 1 registered
[    0.561733] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.562000] PTP clock support registered
[    0.563190] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.563194] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    0.563383] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.563404] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    0.566267] ACPI: bus type USB registered
[    0.566307] usbcore: registered new interface driver usbfs
[    0.566321] usbcore: registered new interface driver hub
[    0.574934] usbcore: registered new device driver usb
[    0.575567] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.575993] uhci_hcd: USB Universal Host Controller Interface driver
[    0.594141] ACPI: Fan [FAN] (on)
[    0.596378] ehci-pci: EHCI PCI platform driver
[    0.600218] thermal LNXTHERM:00: registered as thermal_zone0
[    0.600222] ACPI: Thermal Zone [THRM] (40 C)
[    0.604075] FDC 0 is a post-1991 82077
[    0.610569] SCSI subsystem initialized
[    0.616252] libata version 3.00 loaded.
[    0.755728] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:24:e8:01:98:2a
[    0.755733] e1000e 0000:00:19.0 eth0: Intel(R) PRO/10/100 Network Connection
[    0.755760] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 7, PBA No: FFFFFF-0FF
[    0.755904] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.755914] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.755923] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.755959] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fd00
[    0.756056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.756059] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.756061] usb usb1: Product: UHCI Host Controller
[    0.756063] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[    0.756065] usb usb1: SerialNumber: 0000:00:1a.0
[    0.756236] hub 1-0:1.0: USB hub found
[    0.756251] hub 1-0:1.0: 2 ports detected
[    0.756470] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.756480] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    0.756488] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.756520] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fc00
[    0.756600] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.756603] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.756606] usb usb2: Product: UHCI Host Controller
[    0.756608] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[    0.756610] usb usb2: SerialNumber: 0000:00:1a.1
[    0.756765] hub 2-0:1.0: USB hub found
[    0.756777] hub 2-0:1.0: 2 ports detected
[    0.756990] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.757000] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    0.757007] uhci_hcd 0000:00:1a.2: detected 2 ports
[    0.757051] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fb00
[    0.757185] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.757189] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.757193] usb usb3: Product: UHCI Host Controller
[    0.757196] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[    0.757200] usb usb3: SerialNumber: 0000:00:1a.2
[    0.757470] hub 3-0:1.0: USB hub found
[    0.760049] hub 3-0:1.0: 2 ports detected
[    0.760953] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.760968] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 4
[    0.760994] ehci-pci 0000:00:1a.7: debug port 1
[    0.764932] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    0.765382] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdffe000
[    0.776036] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.776180] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    0.776185] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.776188] usb usb4: Product: EHCI Host Controller
[    0.776192] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.776196] usb usb4: SerialNumber: 0000:00:1a.7
[    0.776482] hub 4-0:1.0: USB hub found
[    0.776503] hub 4-0:1.0: 6 ports detected
[    0.784872] random: nonblocking pool is initialized
[    0.800149] hub 1-0:1.0: USB hub found
[    0.800170] hub 1-0:1.0: 2 ports detected
[    0.824158] hub 2-0:1.0: USB hub found
[    0.824179] hub 2-0:1.0: 2 ports detected
[    0.848150] hub 3-0:1.0: USB hub found
[    0.848173] hub 3-0:1.0: 2 ports detected
[    0.848567] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.848585] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    0.848610] ehci-pci 0000:00:1d.7: debug port 1
[    0.852519] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.853703] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffd000
[    0.864035] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.864155] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    0.864160] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.864164] usb usb5: Product: EHCI Host Controller
[    0.864167] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.864171] usb usb5: SerialNumber: 0000:00:1d.7
[    0.865619] hub 5-0:1.0: USB hub found
[    0.865648] hub 5-0:1.0: 6 ports detected
[    0.867115] ata_piix 0000:00:1f.2: version 2.13
[    0.867294] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.871006] scsi0 : ata_piix
[    0.876100] scsi1 : ata_piix
[    0.876191] ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    0.876196] ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[    0.876326] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.880783] scsi2 : ata_piix
[    0.885185] scsi3 : ata_piix
[    0.885273] ata3: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xec00 irq 19
[    0.885277] ata4: SATA max UDMA/133 cmd 0xee00 ctl 0xed00 bmdma 0xec08 irq 19
[    0.885440] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.885450] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.885461] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.885483] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fa00
[    0.885563] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.885566] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.885569] usb usb6: Product: UHCI Host Controller
[    0.885571] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[    0.885573] usb usb6: SerialNumber: 0000:00:1d.0
[    0.885745] hub 6-0:1.0: USB hub found
[    0.885760] hub 6-0:1.0: 2 ports detected
[    0.885976] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.885985] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.885995] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.886016] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f900
[    0.886092] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.886095] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.886098] usb usb7: Product: UHCI Host Controller
[    0.886100] usb usb7: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[    0.886102] usb usb7: SerialNumber: 0000:00:1d.1
[    0.886335] hub 7-0:1.0: USB hub found
[    0.886353] hub 7-0:1.0: 2 ports detected
[    0.886570] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.886580] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.886590] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.886612] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f800
[    0.886680] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.886683] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.886685] usb usb8: Product: UHCI Host Controller
[    0.886688] usb usb8: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
[    0.886690] usb usb8: SerialNumber: 0000:00:1d.2
[    0.886846] hub 8-0:1.0: USB hub found
[    0.886859] hub 8-0:1.0: 2 ports detected
[    1.214601] ata3: SATA link down (SStatus 0 SControl 300)
[    1.225210] ata4: SATA link down (SStatus 0 SControl 300)
[    1.512014] tsc: Refined TSC clocksource calibration: 2194.499 MHz
[    1.592023] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    1.672060] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.672073] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.672083] ata2.01: link offline, clearing class 3 to NONE
[    1.680122] ata2.00: ATAPI: PLDS DVD+/-RW DH-16A6S, YD11, max UDMA/100
[    1.692057] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.692067] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.696115] ata2.00: configured for UDMA/100
[    1.700221] ata1.00: ATA-8: ST3250310AS, 4.ADA, max UDMA/133
[    1.700224] ata1.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.716237] ata1.00: configured for UDMA/133
[    1.716355] scsi 0:0:0:0: Direct-Access     ATA      ST3250310AS      A    PQ: 0 ANSI: 5
[    1.717578] scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DH-16A6S YD11 PQ: 0 ANSI: 5
[    1.731714] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
[    1.731778] sd 0:0:0:0: [sda] Write Protect is off
[    1.731782] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.731809] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.735284] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.735290] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.735465] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.736253] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.736623] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.766163]  sda: sda1 sda2 < sda5 >
[    1.766907] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.767103] usb 2-1: New USB device found, idVendor=413c, idProduct=2003
[    1.767107] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.767109] usb 2-1: Product: Dell USB Keyboard
[    1.767112] usb 2-1: Manufacturer: Dell
[    1.771672] hidraw: raw HID events driver (C) Jiri Kosina
[    1.788329] usbcore: registered new interface driver usbhid
[    1.788332] usbhid: USB HID core driver
[    1.789546] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/0003:413C:2003.0001/input/input2
[    1.789929] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.1-1/input0
[    2.012048] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    2.172226] PM: Starting manual resume from disk
[    2.172233] PM: Hibernation image partition 8:5 present
[    2.172234] PM: Looking for hibernation image.
[    2.172509] PM: Image not found (code -22)
[    2.172511] PM: Hibernation image not present or could not be loaded.
[    2.188067] usb 3-1: New USB device found, idVendor=046d, idProduct=c05a
[    2.188073] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.188075] usb 3-1: Product: USB Optical Mouse
[    2.188078] usb 3-1: Manufacturer: Logitech
[    2.204556] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb3/3-1/3-1:1.0/0003:046D:C05A.0002/input/input3
[    2.204876] hid-generic 0003:046D:C05A.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.2-1/input0
[    2.316043] usb 5-1: new high-speed USB device number 2 using ehci-pci
[    2.400862] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.450001] usb 5-1: New USB device found, idVendor=4971, idProduct=1023
[    2.450006] usb 5-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    2.450008] usb 5-1: Product: TOURO S
[    2.450010] usb 5-1: Manufacturer: HGST
[    2.450012] usb 5-1: SerialNumber: 21001410240002300277
[    2.452632] usb-storage 5-1:1.0: USB Mass Storage device detected
[    2.452732] scsi4 : usb-storage 5-1:1.0
[    2.452837] usbcore: registered new interface driver usb-storage
[    2.512305] Switched to clocksource tsc
[    3.452645] scsi 4:0:0:0: Direct-Access     HGST     TOURO S          0    PQ: 0 ANSI: 6
[    3.452938] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    3.454641] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.455628] sd 4:0:0:0: [sdb] Write Protect is off
[    3.455632] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    3.456630] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.615540]  sdb: sdb1
[    4.618630] sd 4:0:0:0: [sdb] Attached SCSI disk
[    5.314233] lp: driver loaded but no devices found
[    5.445145] ppdev: user-space parallel port driver
[    5.580219] fuse init (API version 7.23)
[    5.803723] systemd-udevd[162]: starting version 215
[    7.429368] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.771796] systemd-journald[150]: Received request to flush runtime journal from PID 1
[    7.875284] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    7.875291] ACPI: Power Button [PWRB]
[    7.875381] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    7.875385] ACPI: Power Button [PWRF]
[    8.351208] [drm] Initialized drm 1.1.0 20060810
[    8.400884] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.845671] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    9.238407] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    9.446519] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20140424/utaddress-258)
[    9.446527] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.446531] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x00000000000004b8-0x00000000000004bb (\GPO2) (20140424/utaddress-258)
[    9.446535] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.446536] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x000000000000048c-0x000000000000048f (\GPO_) (20140424/utaddress-258)
[    9.446540] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.446541] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.512595] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    9.599090] coretemp coretemp.0: Using relative temperature scale!
[    9.675005] [drm] Memory usable by graphics device = 512M
[    9.675012] [drm] Replacing VGA console driver
[    9.675488] Console: switching to colour dummy device 80x25
[    9.740073] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    9.740089] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.740091] [drm] Driver supports precise vblank timestamp query.
[    9.740167] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.741177] [drm] initialized overlay support
[    9.773908] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    9.811048] iTCO_vendor_support: vendor-support=0
[    9.829002] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    9.829048] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
[    9.829187] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.842069] fbcon: inteldrmfb (fb0) is primary device
[    9.857942] Console: switching to colour frame buffer device 160x64
[    9.861672] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.861674] i915 0000:00:02.0: registered panic notifier
[    9.861701] i915: No ACPI video bus found
[    9.862114] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.916439] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    9.916444] sound hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.916447] sound hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.916449] sound hdaudioC0D2:    mono: mono_out=0x0
[    9.916451] sound hdaudioC0D2:    inputs:
[    9.916454] sound hdaudioC0D2:      Front Mic=0x19
[    9.916456] sound hdaudioC0D2:      Rear Mic=0x18
[    9.916458] sound hdaudioC0D2:      Line=0x1a
[    9.945047] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D2/input8
[    9.950703] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    9.951872] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.955174] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    9.955296] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    9.956926] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    9.960247] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    9.962046] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    9.963818] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    9.984085] Adding 4170748k swap on /dev/sda5.  Priority:-1 extents:1 across:4170748k FS
[   10.791914] RPC: Registered named UNIX socket transport module.
[   10.791919] RPC: Registered udp transport module.
[   10.791921] RPC: Registered tcp transport module.
[   10.791922] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.837511] FS-Cache: Loaded
[   10.865580] FS-Cache: Netfs 'nfs' registered for caching
[   10.926902] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   12.435412] vboxdrv: Found 1 processor cores.
[   12.437772] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   12.437777] vboxdrv: Successfully loaded version 4.3.18_Debian (interface 0x001a0008).
[   13.129853] vboxpci: IOMMU not found (not registered)
[   18.925848] cfg80211: Calling CRDA to update world regulatory domain
[   21.177654] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   21.280077] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   21.280255] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.342008] cfg80211: World regulatory domain updated:
[   21.342014] cfg80211:  DFS Master region: unset
[   21.342016] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   21.342019] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   21.342021] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   21.342023] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   21.342026] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   21.342029] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   21.342031] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   21.342033] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   21.342035] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   43.377192] usb 5-1: USB disconnect, device number 2
[   43.380562] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[   43.380616] sd 4:0:0:0: [sdb] 
[   43.380619] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[   83.308046] usb 5-2: new high-speed USB device number 3 using ehci-pci
[   83.459272] usb 5-2: unable to read config index 0 descriptor/all
[   83.459279] usb 5-2: can't read configurations, error -71
[   83.784068] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[   83.930054] usb 6-2: not running at top speed; connect to a high speed hub
[   83.969044] usb 6-2: New USB device found, idVendor=07d1, idProduct=3c16
[   83.969050] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   83.969052] usb 6-2: Product: 11n Adapter
[   83.969055] usb 6-2: Manufacturer: Ralink
[   83.969057] usb 6-2: SerialNumber: 1.0
[   85.696235] usb 6-2: reset full-speed USB device number 2 using uhci_hcd
[   85.859162] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[   86.094075] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[   86.165270] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   86.165706] usbcore: registered new interface driver rt2800usb
[   86.239123] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   86.342004] rt2800usb 6-2:1.0: firmware: direct-loading firmware rt2870.bin
[   86.342016] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   87.820260] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   90.993062] wlan0: authenticate with 74:9d:dc:0c:f3:b1
[   91.147070] wlan0: send auth to 74:9d:dc:0c:f3:b1 (try 1/3)
[   91.150104] wlan0: authenticated
[   91.150342] rt2800usb 6-2:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   91.150347] rt2800usb 6-2:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   91.150350] rt2800usb 6-2:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   91.152080] wlan0: associate with 74:9d:dc:0c:f3:b1 (try 1/3)
[   91.154295] wlan0: RX AssocResp from 74:9d:dc:0c:f3:b1 (capab=0x431 status=0 aid=8)
[   91.208057] wlan0: associated
[   91.208098] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   91.208145] cfg80211: Calling CRDA for country: US
[   91.226751] cfg80211: Regulatory domain changed to country: US
[   91.226756] cfg80211:  DFS Master region: FCC
[   91.226758] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   91.226760] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   91.226763] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[   91.226766] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   91.226768] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   91.226770] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   95.246548] UDF-fs: warning (device sr0): udf_fill_super: No partition found (2)
[   95.295203] ISO 9660 Extensions: Microsoft Joliet Level 3
[   95.723897] ISO 9660 Extensions: RRIP_1991A
[  142.798595] tracker-extract[1810]: segfault at 18 ip 00007f7b0b2243d5 sp 00007fff52b584f8 error 6 in libglib-2.0.so.0.4200.1[7f7b0b196000+10c000]
[  240.445349] perf interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 50000


Ethtool

Code: Select all

Supported ports: [ TP ]
   Supported link modes:   10baseT/Half 10baseT/Full
                           100baseT/Half 100baseT/Full
   Supported pause frame use: No
   Supports auto-negotiation: Yes
   Advertised link modes:  10baseT/Half 10baseT/Full
                           100baseT/Half 100baseT/Full
   Advertised pause frame use: No
   Advertised auto-negotiation: Yes
   Speed: Unknown!
   Duplex: Unknown! (255)
   Port: Twisted Pair
   PHYAD: 1
   Transceiver: internal
   Auto-negotiation: on
   MDI-X: Unknown (auto)
   Supports Wake-on: pumbg
   Wake-on: g
   Current message level: 0x00000007 (7)
                drv probe link
   Link detected: no


any help would be greatly appreciated

EDIT: I took out the iwconfig because that covers wifi only when this is an ethernet issues and I added ethtool

[v&n]

Why have you posted 'iwconfig' when you need help with Ethernet, not wifi? It may confuse helpers.

Please post outputs of -

Code: Select all

sudo lshw -C network
sudo ethtool eth0
dmesg | grep e1000e

The package 'ethtool' may not be available by default, so you may have to install it beforehand -

Code: Select all

sudo apt-get install ethtool

[topazkitty]

Lshw -C

Code: Select all

*-network               
       description: Ethernet interface
       product: 82562V-2 10/100 Network Connection
       vendor: Intel Corporation
       physical id: 19
       bus info: pci@0000:00:19.0
       logical name: eth0
       version: 02
       serial: 00:24:e8:01:98:2a
       capacity: 100Mbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=1.1-2 latency=0 link=no multicast=yes port=twisted pair
       resources: irq:41 memory:fdfc0000-fdfdffff memory:fdfff000-fdffffff ioport:fe00(size=32)
  *-usb:1
       description: Wireless interface
       product: 11n Adapter
       vendor: Ralink
       physical id: 5
       bus info: usb@3:5
       logical name: wlan0
       version: 1.01
       serial: 1.0
       capabilities: usb-2.00 ethernet physical wireless
       configuration: broadcast=yes driver=rt2800usb driverversion=3.16.0-4-amd64 firmware=0.29 ip=192.168.1.83 link=yes maxpower=450mA multicast=yes speed=480Mbit/s wireless=IEEE 802.11bgn


Ethtool

Code: Select all

Supported ports: [ TP ]
   Supported link modes:   10baseT/Half 10baseT/Full
                           100baseT/Half 100baseT/Full
   Supported pause frame use: No
   Supports auto-negotiation: Yes
   Advertised link modes:  10baseT/Half 10baseT/Full
                           100baseT/Half 100baseT/Full
   Advertised pause frame use: No
   Advertised auto-negotiation: Yes
   Speed: Unknown!
   Duplex: Unknown! (255)
   Port: Twisted Pair
   PHYAD: 1
   Transceiver: internal
   Auto-negotiation: on
   MDI-X: Unknown (auto)
   Supports Wake-on: pumbg
   Wake-on: g
   Current message level: 0x00000007 (7)
                drv probe link
   Link detected: no

dmesg | grep e1000e

Code: Select all

dmesg | grep e1000e
[    0.571873] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.571877] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    0.574261] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.574288] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    0.755754] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:24:e8:01:98:2a
[    0.755760] e1000e 0000:00:19.0 eth0: Intel(R) PRO/10/100 Network Connection
[    0.755785] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 7, PBA No: FFFFFF-0FF
[   24.529655] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   24.632068] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X


[Head_on_a_Stick]

Is there a possibility of hardware failure?

Does the connection work in the live environment?

[v&n]

Is there a possibility of hardware failure?

Does the connection work in the live environment?

+1, please confirm that first. If you think it is a problem with jessie, could you confirm the card is functional with any other distro/release? A Wheezy live cd for example?

If the possibility of a broken card is ruled out, please try an old trick first -

Code: Select all

sudo ethtool -s eth0 speed 100 duplex full autoneg off

Then check -

Code: Select all

sudo ethtool eth0

Does it show "Link detected" to be "yes" now?

If not, then at the risk of venturing into unknown territories, I may try some further options like a driver parameter "IndMode" or maybe even some kernel boot parameters.

Reference link : http://downloadmirror.intel.com/20927/e ... htm#e1000e

[topazkitty]

I tried an ubuntu 14.04 live cd and the ethernet card does not work there either. The computer is 7 years old so maybe it just broke.

EDIT: I tried the cord in my laptop and it works so its something wrong with card then.

[mardybear]

I have just installed Debian Jessie...I am having a horrible time with Ethernet connectivity though. In wheezy my ethernet card worked no issues. Jessie, on the other hand does not recognize this ethernet card cable being plugged in when it is.

I tried an ubuntu 14.04 live cd and the ethernet card does not work there either. The computer is 7 years old so maybe it just broke.

Although unlikely, there is a slight chance your hardware broke between installing Wheezy, Jessie and testing Ubuntu on the same hardware. More likely is the differences in OSs. They all use different kernels, with Wheezy obviously being the oldest kernel. Unless you require something Jessie has to offer, sticking with Wheezy is reasonable and there is a decent chance it will receive long term support. Regardless it will be supported for at least a year after the official Jessie release.
http://www.phoronix.com/scan.php?page=a ... 1404&num=1

[v&n]

I tried an ubuntu 14.04 live cd and the ethernet card does not work there either.

Ubuntu 14.04 also uses a much newer kernel. That's why I suggested to try a Wheezy Live cd to confirm. If you have or can download the iso of wheezy live cd, please try that also. If it is not working with that either, you have your latest guess confirmed.

[topazkitty]

I burned a wheezy live dvd and the ethernet card works with that.

[topazkitty]

Code: Select all

sudo ethtool -s eth0 speed 100 duplex full autoneg off

That trick gets the ethernet to work what exactly does that command do and how can i make it permanent?

[v&n]

Code: Select all

sudo ethtool -s eth0 speed 100 duplex full autoneg off

That trick gets the ethernet to work what exactly does that command do and how can i make it permanent?

That's awesome!

The command disables "Autonegotiation" (which I believe is the key difference here) and forces 100 Mbps speed with full duplex. It helps in case where the NIC and the device on the other end of the cable fail to negotiate a compatible speed with Autonegotiation on.

Now why they fail with autonegotiation on is something I have only assumptions about, with no authentic source to back that assumption (maybe there is, but I didn't try hard enough to find that). Here's what I think if you are interested -

The e1000e driver is a gigabit speed driver (1000 Mbps) which can also support lower speeds, but starts trying to communicate with the highest speed it can support, falling back to lower speeds if required. Your card is an old one and only supports upto 10/100 Mbps speeds. Now in this case, I believe the driver e1000e starts its attempts to operate the card with highest speed and MSI-X irq mode (least compatible, but required for highest speeds) that it can support, expecting a response from the card about whether it can support it or not. But instead of responding to the driver, the card totally locks up (due to a bug in the driver or card itself, I can't be sure) when it receives such high speed signals. The ethtool command I proposed explicitly tells the driver to communicate with a lower speed (thus possibly implicitly meaning MSI or legacy irq modes, which are more compatible than MSI-X) which is exactly what the card is supposed to support happily.

If my assumptions above are correct, you may also be able to make the driver work with "IntMode=0" or "IntMode=1" module parameter (IntMode=2 is default value, which means Interrupt Mode "MSI-X").

The command can be made permanent by adding it to your /etc/rc.local file, which can be done with the following command -

Code: Select all

sudo sed -i '/^exit 0/ i ethtool -s eth0 speed 100 duplex full autoneg off' /etc/rc.local

The above command will insert the command just above the last line (which must always be "exit 0") in the rc.local file.

If you wish to tinker further and try the module parameter "IntMode=0" also, just let me know. It can also be made permanent, if works, by writing a conf file in /etc/modprobe.d directory.

[topazkitty]

That worked perfectly, Thank you guys, you're awesome.

[v&n]

Please edit your first post to add [SOLVED] prefix to the title. It will help others by indicating that the thread contains a possible solution to the problem mentioned in the title.

Thanks for the feedback.