Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230

 

 

 

Not exactly Powerdown

Linux Kernel, Network, and Services configuration.
Post Reply
Message
Author
Palmstroem
Posts: 19
Joined: 2017-08-12 12:36

Not exactly Powerdown

#1 Post by Palmstroem »

After a lot of trouble and work I finally managed to obtain a dual boot configuration (Debian 9.1 and Windows 10) on an Acer Aspire ES1-533 laptop. HOORAY! By the way, the trouble was caused by a very rudimentary UEFI - to put it politely, but that is a different story.

Everything works fine, except: when I power down the laptop then processes and devices are cleanly shut down until I get the last messages:

Code: Select all

sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
reboot: System halted
Looks good. BUT:
  • 1. The power led is still on.
    2. The display is still on.
    3. Sometimes a fan is still on.
So every time I have to use a hard poweroff i.e., pressing the power-off-button for some seconds. Using different commands (shutdown -h now, systemctl poweroff, using the gnome poweroff button, etc.) does not help. Starting Debian with acpi=off does not help, so I guess it's not an ACPI problem.
Any ideas?
Top
cronoik
Posts: 310
Joined: 2015-05-20 21:17

Re: Not exactly Powerdown

#2 Post by cronoik »

Have you tried to boot with acpi=noirq [1]? What other parameters do you use to boot? Does

Code: Select all

systemctl -f poweroff
work? Can you please post /var/log/messages of one session?

[1] https://askubuntu.com/questions/632591/ ... just-halts
Have a nice day!
Top
Palmstroem
Posts: 19
Joined: 2017-08-12 12:36

Re: Not exactly Powerdown

#3 Post by Palmstroem »

Thank you for the link! However, I never observed display flickering etc. similar to what the OP of that link described.

Normally, I boot the linux image with parameter ro only. I tried acpi=noirq but that causes a non-functional touchpad. When I continue with an USB mouse and then power down the laptop it is still not fully poweroff (see points 1-3 in my list).

Code: Select all

systemctl -f poweroff
gives less messages but ends up the same.

EDIT: Surprise, surprise! Recenty a strange change in the laptop behavior! I really don't know where it stems from (maybe a major Windows Update? After all, it's a dual boot system) but now the end messages differ from my previous post. Now it says:

Code: Select all

sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
r8169 0000:01:00.0: System wakeup enabled by ACPI
ACPI: Preparing to enter system sleep state S5
reboot: Powerdown
which seems odd, since "Wakeup on LAN" is for sure disabled in the UEFI menu. The startup messages also say that it is disabled, see under [0.911542] below.

Finally, here are some lines from /var/log/messages. I could not attach them as a file, therefore I shortened the log. If you need more, tell me please.

Code: Select all

Aug 18 09:14:43 antares tracker-miner-fs.desktop[1059]: Received signal:15->'Beendet'
Aug 18 09:14:43 antares tracker-miner-user-guides.desktop[1047]: Received signal:15->'Beendet'
Aug 18 11:14:23 antares kernel: [    0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u3 (2017-08-06)
Aug 18 11:14:23 antares kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=93042fe7-1ad6-4692-b267-6c5e856aab8d ro
Aug 18 11:14:23 antares kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
Aug 18 11:14:23 antares kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
Aug 18 11:14:23 antares kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
Aug 18 11:14:23 antares kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
Aug 18 11:14:23 antares kernel: [    0.000000] x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
Aug 18 11:14:23 antares kernel: [    0.000000] x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
Aug 18 11:14:23 antares kernel: [    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
Aug 18 11:14:23 antares kernel: [    0.000000] x86/fpu: Using 'eager' FPU context switches.
Aug 18 11:14:23 antares kernel: [    0.000000] e820: BIOS-provided physical RAM map:
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000067a96fff] usable
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000067a97000-0x0000000067a97fff] ACPI NVS
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000067a98000-0x0000000067ac1fff] reserved
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000067ac2000-0x0000000067afdfff] usable
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000067afe000-0x0000000068afdfff] reserved
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000068afe000-0x000000007822efff] usable
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x000000007822f000-0x00000000784befff] type 20
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x00000000784bf000-0x000000007aebefff] reserved
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x000000007aebf000-0x000000007afbefff] ACPI NVS
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x000000007afbf000-0x000000007affefff] ACPI data
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x000000007afff000-0x000000007affffff] usable
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
Aug 18 11:14:23 antares kernel: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
Aug 18 11:14:23 antares kernel: [    0.000000] NX (Execute Disable) protection: active
Aug 18 11:14:23 antares kernel: [    0.000000] efi: EFI v2.50 by INSYDE Corp.
Aug 18 11:14:23 antares kernel: [    0.000000] efi:  ACPI 2.0=0x7affe014  ESRT=0x78866b98  SMBIOS=0x78865000  SMBIOS 3.0=0x78863000  PROP=0x66b64258 
Aug 18 11:14:23 antares kernel: [    0.000000] SMBIOS 3.0.0 present.
Aug 18 11:14:23 antares kernel: [    0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
Aug 18 11:14:23 antares kernel: [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
Aug 18 11:14:23 antares kernel: [    0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
Aug 18 11:14:23 antares kernel: [    0.000000] esrt: Reserving ESRT space from 0x0000000078866b98 to 0x0000000078866bd0.
Aug 18 11:14:23 antares kernel: [    0.000000] Using GB pages for direct mapping
Aug 18 11:14:23 antares kernel: [    0.000000] RAMDISK: [mem 0x35b75000-0x36db1fff]
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: Early table checksum verification disabled
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: RSDP 0x000000007AFFE014 000024 (v02 ACRSYS)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: XSDT 0x000000007AFD8188 0000EC (v01 ACRSYS ACRPRDCT 00000003      01000013)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: FACP 0x000000007AFEE000 000114 (v06 ACRSYS ACRPRDCT 00000003 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: DSDT 0x000000007AFE1000 0074D4 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: FACS 0x000000007AF8C000 000040
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: FACS 0x000000007AF8C000 000040
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: MSDM 0x000000007AFFC000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: UEFI 0x000000007AFFA000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: SSDT 0x000000007AFF3000 000554 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: DBG2 0x000000007AFF1000 000072 (v00 ACRSYS ACRPRDCT 00000003 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: LPIT 0x000000007AFEC000 00005C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: MCFG 0x000000007AFEA000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: SSDT 0x000000007AFDE000 000400 (v02 INSYDE ACRPRDCT 00003000 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: SSDT 0x000000007AFDC000 00032D (v02 INSYDE ACRPRDCT 00003000 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: SSDT 0x000000007AFD5000 0027B3 (v02 INSYDE ACRPRDCT 00003000 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: WDAT 0x000000007AFEF000 000104 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: UEFI 0x000000007AFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: SSDT 0x000000007AFF4000 0050FE (v01 INSYDE ACRPRDCT 00001000 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: DBGP 0x000000007AFF0000 000034 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: APIC 0x000000007AFEB000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: SSDT 0x000000007AFDF000 000298 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: SSDT 0x000000007AFDB000 00017C (v02 INSYDE ACRPRDCT 00003000 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: TPM2 0x000000007AFF2000 000034 (v03 ACRSYS ACRPRDCT 00000002 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: NPKT 0x000000007AFE9000 000065 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: FPDT 0x000000007AFDA000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: HPET 0x000000007AFED000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: BDAT 0x000000007AFFB000 000030 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: SSDT 0x000000007AFDD000 00072B (v02 INSYDE ACRPRDCT 00003000 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: BGRT 0x000000007AFE0000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: NHLT 0x000000007AFD3000 001A50 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
Aug 18 11:14:23 antares kernel: [    0.000000] No NUMA configuration found
Aug 18 11:14:23 antares mtp-probe: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:15.0/usb1/1-7"
Aug 18 11:14:23 antares mtp-probe: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:15.0/usb1/1-8"
Aug 18 11:14:23 antares mtp-probe: bus: 1, device: 2 was not an MTP device
Aug 18 11:14:23 antares mtp-probe: bus: 1, device: 3 was not an MTP device
Aug 18 11:14:23 antares kernel: [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
Aug 18 11:14:23 antares kernel: [    0.000000] NODE_DATA(0) allocated [mem 0x27fffb000-0x27fffffff]
Aug 18 11:14:23 antares kernel: [    0.000000] Zone ranges:
Aug 18 11:14:23 antares kernel: [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Aug 18 11:14:23 antares kernel: [    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
Aug 18 11:14:23 antares kernel: [    0.000000]   Normal   [mem 0x0000000100000000-0x000000027fffffff]
Aug 18 11:14:23 antares kernel: [    0.000000]   Device   empty
Aug 18 11:14:23 antares kernel: [    0.000000] Movable zone start for each node
Aug 18 11:14:23 antares kernel: [    0.000000] Early memory node ranges
Aug 18 11:14:23 antares kernel: [    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
Aug 18 11:14:23 antares kernel: [    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000085fff]
Aug 18 11:14:23 antares kernel: [    0.000000]   node   0: [mem 0x0000000000100000-0x000000000fffffff]
Aug 18 11:14:23 antares kernel: [    0.000000]   node   0: [mem 0x0000000012151000-0x0000000067a96fff]
Aug 18 11:14:23 antares kernel: [    0.000000]   node   0: [mem 0x0000000067ac2000-0x0000000067afdfff]
Aug 18 11:14:23 antares kernel: [    0.000000]   node   0: [mem 0x0000000068afe000-0x000000007822efff]
Aug 18 11:14:23 antares kernel: [    0.000000]   node   0: [mem 0x000000007afff000-0x000000007affffff]
Aug 18 11:14:23 antares kernel: [    0.000000]   node   0: [mem 0x0000000100000000-0x000000027fffffff]
Aug 18 11:14:23 antares kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
Aug 18 11:14:23 antares kernel: [    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
Aug 18 11:14:23 antares kernel: [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Aug 18 11:14:23 antares kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Aug 18 11:14:23 antares kernel: [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
Aug 18 11:14:23 antares kernel: [    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x00086000-0x000fffff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x67a97000-0x67a97fff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x67a98000-0x67ac1fff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x67afe000-0x68afdfff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x7822f000-0x784befff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x784bf000-0x7aebefff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x7aebf000-0x7afbefff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x7afbf000-0x7affefff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xff7fffff]
Aug 18 11:14:23 antares kernel: [    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
Aug 18 11:14:23 antares kernel: [    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Aug 18 11:14:23 antares kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Aug 18 11:14:23 antares kernel: [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Aug 18 11:14:23 antares kernel: [    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
Aug 18 11:14:23 antares kernel: [    0.000000] percpu: Embedded 35 pages/cpu @ffff8c28ffc00000 s103512 r8192 d31656 u524288
Aug 18 11:14:23 antares kernel: [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2020063
Aug 18 11:14:23 antares kernel: [    0.000000] Policy zone: Normal
Aug 18 11:14:23 antares kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=93042fe7-1ad6-4692-b267-6c5e856aab8d ro
Aug 18 11:14:23 antares kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Aug 18 11:14:23 antares kernel: [    0.000000] Memory: 7927328K/8208608K available (6187K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 281280K reserved, 0K cma-reserved)
Aug 18 11:14:23 antares kernel: [    0.000000] Hierarchical RCU implementation.
Aug 18 11:14:23 antares kernel: [    0.000000] 	Build-time adjustment of leaf fanout to 64.
Aug 18 11:14:23 antares kernel: [    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
Aug 18 11:14:23 antares kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
Aug 18 11:14:23 antares kernel: [    0.000000] NR_IRQS:33024 nr_irqs:1024 16
Aug 18 11:14:23 antares kernel: [    0.000000] Console: colour dummy device 80x25
Aug 18 11:14:23 antares kernel: [    0.000000] console [tty0] enabled
Aug 18 11:14:23 antares kernel: [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
Aug 18 11:14:23 antares kernel: [    0.000000] tsc: PIT calibration matches HPET. 1 loops
Aug 18 11:14:23 antares kernel: [    0.000000] tsc: Detected 1094.314 MHz processor
Aug 18 11:14:23 antares kernel: [    0.000105] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
Aug 18 11:14:23 antares kernel: [    0.000124] pid_max: default: 32768 minimum: 301
Aug 18 11:14:23 antares kernel: [    0.000175] ACPI: Core revision 20160831
Aug 18 11:14:23 antares kernel: [    0.021060] ACPI: 9 ACPI AML tables successfully acquired and loaded
Aug 18 11:14:23 antares kernel: [    0.023166] Security Framework initialized
Aug 18 11:14:23 antares kernel: [    0.023185] Yama: disabled by default; enable with sysctl kernel.yama.*
Aug 18 11:14:23 antares kernel: [    0.023212] AppArmor: AppArmor disabled by boot time parameter
Aug 18 11:14:23 antares kernel: [    0.024407] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Aug 18 11:14:23 antares kernel: [    0.029480] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Aug 18 11:14:23 antares kernel: [    0.031750] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Aug 18 11:14:23 antares kernel: [    0.031789] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Aug 18 11:14:23 antares kernel: [    0.032558] CPU: Physical Processor ID: 0
Aug 18 11:14:23 antares kernel: [    0.032571] CPU: Processor Core ID: 0
Aug 18 11:14:23 antares kernel: [    0.032603] mce: CPU supports 7 MCE banks
Aug 18 11:14:23 antares kernel: [    0.032720] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Aug 18 11:14:23 antares kernel: [    0.032729] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Aug 18 11:14:23 antares kernel: [    0.036669] Freeing SMP alternatives memory: 24K (ffffffffbb07a000 - ffffffffbb080000)
Aug 18 11:14:23 antares kernel: [    0.055942] ftrace: allocating 25180 entries in 99 pages
Aug 18 11:14:23 antares kernel: [    0.117963] smpboot: Max logical packages: 1
Aug 18 11:14:23 antares kernel: [    0.119356] x2apic: IRQ remapping doesn't support X2APIC mode
Aug 18 11:14:23 antares kernel: [    0.124448] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 18 11:14:23 antares kernel: [    0.164173] smpboot: CPU0: Intel(R) Pentium(R) CPU N4200 @ 1.10GHz (family: 0x6, model: 0x5c, stepping: 0x9)
Aug 18 11:14:23 antares kernel: [    0.164198] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
Aug 18 11:14:23 antares kernel: [    0.164244] ... version:                4
Aug 18 11:14:23 antares kernel: [    0.164251] ... bit width:              48
Aug 18 11:14:23 antares kernel: [    0.164258] ... generic registers:      4
Aug 18 11:14:23 antares kernel: [    0.164266] ... value mask:             0000ffffffffffff
Aug 18 11:14:23 antares kernel: [    0.164274] ... max period:             00007fffffffffff
Aug 18 11:14:23 antares kernel: [    0.164282] ... fixed-purpose events:   3
Aug 18 11:14:23 antares kernel: [    0.164289] ... event mask:             000000070000000f
Aug 18 11:14:23 antares kernel: [    0.165949] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Aug 18 11:14:23 antares kernel: [    0.166378] x86: Booting SMP configuration:
Aug 18 11:14:23 antares kernel: [    0.166389] .... node  #0, CPUs:      #1 #2 #3
Aug 18 11:14:23 antares kernel: [    0.406487] x86: Booted up 1 node, 4 CPUs
Aug 18 11:14:23 antares kernel: [    0.406506] smpboot: Total of 4 processors activated (8758.89 BogoMIPS)
Aug 18 11:14:23 antares kernel: [    0.410026] devtmpfs: initialized
Aug 18 11:14:23 antares kernel: [    0.410223] x86/mm: Memory block size: 128MB
Aug 18 11:14:23 antares kernel: [    0.418236] PM: Registering ACPI NVS region [mem 0x67a97000-0x67a97fff] (4096 bytes)
Aug 18 11:14:23 antares kernel: [    0.418253] PM: Registering ACPI NVS region [mem 0x7aebf000-0x7afbefff] (1048576 bytes)
Aug 18 11:14:23 antares kernel: [    0.418470] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Aug 18 11:14:23 antares kernel: [    0.418503] futex hash table entries: 1024 (order: 4, 65536 bytes)
Aug 18 11:14:23 antares kernel: [    0.418656] pinctrl core: initialized pinctrl subsystem
Aug 18 11:14:23 antares kernel: [    0.423378] NET: Registered protocol family 16
Aug 18 11:14:23 antares kernel: [    0.432999] cpuidle: using governor ladder
Aug 18 11:14:23 antares kernel: [    0.449018] cpuidle: using governor menu
Aug 18 11:14:23 antares kernel: [    0.449147] ACPI: bus type PCI registered
Aug 18 11:14:23 antares kernel: [    0.449157] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Aug 18 11:14:23 antares kernel: [    0.449379] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
Aug 18 11:14:23 antares kernel: [    0.449396] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
Aug 18 11:14:23 antares kernel: [    0.449418] PCI: Using configuration type 1 for base access
Aug 18 11:14:23 antares kernel: [    0.465471] HugeTLB registered 1 GB page size, pre-allocated 0 pages
Aug 18 11:14:23 antares kernel: [    0.465483] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Aug 18 11:14:23 antares kernel: [    0.466181] ACPI: Added _OSI(Module Device)
Aug 18 11:14:23 antares kernel: [    0.466192] ACPI: Added _OSI(Processor Device)
Aug 18 11:14:23 antares kernel: [    0.466200] ACPI: Added _OSI(3.0 _SCP Extensions)
Aug 18 11:14:23 antares kernel: [    0.466209] ACPI: Added _OSI(Processor Aggregator Device)
Aug 18 11:14:23 antares kernel: [    0.467214] ACPI: Executed 3 blocks of module-level executable AML code
Aug 18 11:14:23 antares kernel: [    0.482188] ACPI: Dynamic OEM Table Load:
Aug 18 11:14:23 antares kernel: [    0.482218] ACPI: SSDT 0xFFFF8C28F5D39200 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20130117)
Aug 18 11:14:23 antares kernel: [    0.483360] ACPI: Dynamic OEM Table Load:
Aug 18 11:14:23 antares kernel: [    0.483389] ACPI: SSDT 0xFFFF8C28F5D13200 00015F (v02 PmRef  ApIst    00003000 INTL 20130117)
Aug 18 11:14:23 antares kernel: [    0.483957] ACPI: Dynamic OEM Table Load:
Aug 18 11:14:23 antares kernel: [    0.483983] ACPI: SSDT 0xFFFF8C28F636B0C0 00008D (v02 PmRef  ApCst    00003000 INTL 20130117)
Aug 18 11:14:23 antares kernel: [    0.486281] ACPI : EC: EC started
Aug 18 11:14:23 antares kernel: [    0.486293] ACPI : EC: interrupt blocked
Aug 18 11:14:23 antares kernel: [    0.486980] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
Aug 18 11:14:23 antares kernel: [    0.486993] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
Aug 18 11:14:23 antares kernel: [    0.487008] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
Aug 18 11:14:23 antares kernel: [    0.487020] ACPI: Interpreter enabled
Aug 18 11:14:23 antares kernel: [    0.487091] ACPI: (supports S0 S3 S4 S5)
Aug 18 11:14:23 antares kernel: [    0.487100] ACPI: Using IOAPIC for interrupt routing
Aug 18 11:14:23 antares kernel: [    0.487190] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Aug 18 11:14:23 antares kernel: [    0.767166] ACPI: Power Resource [FN00] (on)
Aug 18 11:14:23 antares kernel: [    0.768386] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Aug 18 11:14:23 antares kernel: [    0.768408] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Aug 18 11:14:23 antares kernel: [    0.770330] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
Aug 18 11:14:23 antares kernel: [    0.770378] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
Aug 18 11:14:23 antares kernel: [    0.771919] PCI host bridge to bus 0000:00
Aug 18 11:14:23 antares kernel: [    0.771934] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
Aug 18 11:14:23 antares kernel: [    0.771945] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
Aug 18 11:14:23 antares kernel: [    0.771955] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
Aug 18 11:14:23 antares kernel: [    0.771965] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
Aug 18 11:14:23 antares kernel: [    0.771975] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Aug 18 11:14:23 antares kernel: [    0.771990] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
Aug 18 11:14:23 antares kernel: [    0.772004] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
Aug 18 11:14:23 antares kernel: [    0.772018] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
Aug 18 11:14:23 antares kernel: [    0.772032] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
Aug 18 11:14:23 antares kernel: [    0.772046] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
Aug 18 11:14:23 antares kernel: [    0.772060] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
Aug 18 11:14:23 antares kernel: [    0.772074] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
Aug 18 11:14:23 antares kernel: [    0.772088] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
Aug 18 11:14:23 antares kernel: [    0.772102] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
Aug 18 11:14:23 antares kernel: [    0.772116] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
Aug 18 11:14:23 antares kernel: [    0.772130] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
Aug 18 11:14:23 antares kernel: [    0.772144] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
Aug 18 11:14:23 antares kernel: [    0.772158] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
Aug 18 11:14:23 antares kernel: [    0.772172] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
Aug 18 11:14:23 antares kernel: [    0.772186] pci_bus 0000:00: root bus resource [bus 00-ff]
Aug 18 11:14:23 antares kernel: [    0.774465] pci 0000:00:0e.0: System wakeup disabled by ACPI
Aug 18 11:14:23 antares kernel: [    0.776724] pci 0000:00:13.0: System wakeup disabled by ACPI
Aug 18 11:14:23 antares kernel: [    0.777428] pci 0000:00:13.3: System wakeup disabled by ACPI
Aug 18 11:14:23 antares kernel: [    0.885653] pci 0000:00:15.0: System wakeup disabled by ACPI
Aug 18 11:14:23 antares liblogging-stdlog:  [origin software="rsyslogd" swVersion="8.24.0" x-pid="512" x-info="http://www.rsyslog.com"] start
Aug 18 11:14:23 antares kernel: [    0.899043] pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
Aug 18 11:14:23 antares kernel: [    0.899277] pci 0000:01:00.0: System wakeup disabled by ACPI
Aug 18 11:14:23 antares kernel: [    0.909688] pci 0000:00:13.0: PCI bridge to [bus 01]
Aug 18 11:14:23 antares kernel: [    0.910710] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
Aug 18 11:14:23 antares kernel: [    0.911542] pci 0000:02:00.0: System wakeup disabled by ACPI
Aug 18 11:14:23 antares kernel: [    0.921920] pci 0000:00:13.3: PCI bridge to [bus 02]
Aug 18 11:14:23 antares kernel: [    0.999174] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
Aug 18 11:14:23 antares kernel: [    0.999372] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
Aug 18 11:14:23 antares kernel: [    0.999561] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
Aug 18 11:14:23 antares kernel: [    0.999749] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
Aug 18 11:14:23 antares kernel: [    0.999936] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
Aug 18 11:14:23 antares kernel: [    1.000123] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
Aug 18 11:14:23 antares kernel: [    1.000311] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
Aug 18 11:14:23 antares kernel: [    1.000499] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
Aug 18 11:14:23 antares kernel: [    1.003478] ACPI: Enabled 3 GPEs in block 00 to 7F
Aug 18 11:14:23 antares kernel: [    1.003622] ACPI : EC: interrupt unblocked
Aug 18 11:14:23 antares kernel: [    1.003673] ACPI : EC: event unblocked
Aug 18 11:14:23 antares kernel: [    1.003769] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
Aug 18 11:14:23 antares kernel: [    1.003786] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
Aug 18 11:14:23 antares kernel: [    1.004184] vgaarb: setting as boot device: PCI:0000:00:02.0
Aug 18 11:14:23 antares kernel: [    1.004195] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Aug 18 11:14:23 antares kernel: [    1.004224] vgaarb: loaded
Aug 18 11:14:23 antares kernel: [    1.004232] vgaarb: bridge control possible 0000:00:02.0
Aug 18 11:14:23 antares kernel: [    1.004350] Registered efivars operations
Aug 18 11:14:23 antares kernel: [    1.032283] PCI: Using ACPI for IRQ routing
Top
Post Reply

Return to “System and Network configuration”