post-install health check

Kernels & Hardware, configuring network, installing services

post-install health check

Postby kilter » 2017-10-19 22:38

I have used Linux as an end user for some time, but have limited experience at sysadmin. I just installed Debian 9, which seemed to go well, but would like to check if everything is performing ok. I am very happy to search the web for solutions to problems, but the issue I have is that looking at the output of dmesg, there is a lot of information and I'm unsure if it is telling me there's a problem as there is simply too much info to look everything up. Would this be an appropriate forum for me to post this output to find out what, if anything, I need to investigate further?
Many thanks in advance!
kilter
 
Posts: 4
Joined: 2017-08-27 16:06

Re: post-install health check

Postby 4D696B65 » 2017-10-19 22:57

kilter wrote:Would this be an appropriate forum for me to post this output to find out what, if anything, I need to investigate further?

Yes, in code tags please.
User avatar
4D696B65
 
Posts: 2022
Joined: 2009-06-28 06:09

Re: post-install health check

Postby tynman » 2017-10-19 22:59

I doubt it would be "inappropriate", a such. But whether or not anyone takes the bait and bothers to looks at your dmesg output and offers you an analysis is another matter. (I wouldn't.)

Depending on what exactly you've installed, a basic health check boils down to a small list of things you can probably already answer by now.
    Keyboard working
    video working.
    audio working
    HDD Partitions got mounted (df command?)
    Network working well enough to get an internet connection

Maybe others would have some things to add to that list. :)
tynman
 
Posts: 48
Joined: 2016-05-03 19:48
Location: British Columbia, Canada

Re: post-install health check

Postby GarryRicketson » 2017-10-20 01:21

looking at the output of dmesg, there is a lot of information

Yes it is a lot of information, but could be use full.
by tynman » But whether or not anyone takes the bait and bothers to looks at your dmesg output and offers you an analysis is another matter.


When people do use the code boxes, I do take the time to look at it, and so do
others.
These are code boxes :
Code: Select all
 the  code goes inside them  :D  :cry:  :|

Code: Select all
[code] the  code goes inside them  :D  :cry:  :| [/code]
 

When they do not use code boxes things like this happen :
below is the same text I had inside the code boxes
the code goes inside them :D :cry: :|

And then I do not bother to try to make sense of any of it, any way, there are a few members here that will be able to make sense of what the dmesg output says.
"What we expect you have already Done"

Before doing anything, read the Debian documentation:
Debian Documentation
How to ask the smart way
Debian Foro Español
======================
For the Birds
User avatar
GarryRicketson
 
Posts: 4357
Joined: 2015-01-20 22:16
Location: Durango, Mexico

Re: post-install health check

Postby kilter » 2017-10-22 22:08

Thank you! The output of dmesg follows. I had to split it over 2 messages as it exceeds the max 60000 characters...
Code: Select all
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BFF00000 mask FFFF00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] Base memory trampoline at [ffff8e3d80099000] 99000 size 24576
[    0.000000] BRK [0xb5d2e000, 0xb5d2efff] PGTABLE
[    0.000000] BRK [0xb5d2f000, 0xb5d2ffff] PGTABLE
[    0.000000] BRK [0xb5d30000, 0xb5d30fff] PGTABLE
[    0.000000] BRK [0xb5d31000, 0xb5d31fff] PGTABLE
[    0.000000] BRK [0xb5d32000, 0xb5d32fff] PGTABLE
[    0.000000] BRK [0xb5d33000, 0xb5d33fff] PGTABLE
[    0.000000] BRK [0xb5d34000, 0xb5d34fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35b59000-0x36da3fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FBB10 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000BFE5D200 000064 (v01 DELL   M08      27D80C0B ASL  00000061)
[    0.000000] ACPI: FACP 0x00000000BFE5D09C 0000F4 (v04 DELL   M08      27D80C0B ASL  00000061)
[    0.000000] ACPI: DSDT 0x00000000BFE5D800 0063B2 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.000000] ACPI: FACS 0x00000000BFE6C000 000040
[    0.000000] ACPI: FACS 0x00000000BFE6C000 000040
[    0.000000] ACPI: HPET 0x00000000BFE5D300 000038 (v01 DELL   M08      00000001 ASL  00000061)
[    0.000000] ACPI: APIC 0x00000000BFE5D400 000068 (v01 DELL   M08      27D80C0B ASL  00000047)
[    0.000000] ACPI: ASF! 0x00000000BFE5D000 00007E (v32 DELL   M08      27D80C0B ASL  00000061)
[    0.000000] ACPI: MCFG 0x00000000BFE5D3C0 00003E (v16 DELL   M08      27D80C0B ASL  00000061)
[    0.000000] ACPI: TCPA 0x00000000BFE5D700 000032 (v01                 00000000 ASL  00000000)
[    0.000000] ACPI: SLIC 0x00000000BFE5D49C 000176 (v01 DELL   M08      27D80C0B ASL  00000061)
[    0.000000] ACPI: SSDT 0x00000000BFE5B9C0 0004CC (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bfe59fff]
[    0.000000] NODE_DATA(0) allocated [mem 0xbfe55000-0xbfe59fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000bfe59fff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bfe59fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bfe59fff]
[    0.000000] On node 0 totalpages: 785912
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12218 pages used for memmap
[    0.000000]   DMA32 zone: 781914 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8e3e3fc00000 s103512 r8192 d31656 u1048576
[    0.000000] pcpu-alloc: s103512 r8192 d31656 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 773609
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=04212b9b-6137-4341-91de-ebbf27d0e813 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3059728K/3143648K available (6187K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 83920K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 64.
[    0.000000]    RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1994.970 MHz processor
[    0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.94 BogoMIPS (lpj=7979880)
[    0.004017] pid_max: default: 32768 minimum: 301
[    0.004043] ACPI: Core revision 20160831
[    0.010455] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.010531] Security Framework initialized
[    0.010534] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.010543] AppArmor: AppArmor disabled by boot time parameter
[    0.010916] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.013685] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.015185] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.015193] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.015740] CPU: Physical Processor ID: 0
[    0.015741] CPU: Processor Core ID: 0
[    0.015744] mce: CPU supports 6 MCE banks
[    0.015755] CPU0: Thermal monitoring enabled (TM2)
[    0.015760] process: using mwait in idle threads
[    0.015766] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.015767] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.016192] Freeing SMP alternatives memory: 24K (ffffffffa247a000 - ffffffffa2480000)
[    0.020008] ftrace: allocating 25180 entries in 99 pages
[    0.032128] smpboot: Max logical packages: 1
[    0.032614] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0xd)
[    0.076000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.076000] core: PEBS disabled due to CPU errata
[    0.076000] ... version:                2
[    0.076000] ... bit width:              40
[    0.076000] ... generic registers:      2
[    0.076000] ... value mask:             000000ffffffffff
[    0.076000] ... max period:             000000007fffffff
[    0.076000] ... fixed-purpose events:   3
[    0.076000] ... event mask:             0000000700000003
[    0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.076000] x86: Booting SMP configuration:
[    0.076000] .... node  #0, CPUs:      #1
[    0.154029] x86: Booted up 1 node, 2 CPUs
[    0.154029] smpboot: Total of 2 processors activated (7979.91 BogoMIPS)
[    0.154029] devtmpfs: initialized
[    0.154029] x86/mm: Memory block size: 128MB
[    0.157931] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.157940] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.157989] pinctrl core: initialized pinctrl subsystem
[    0.158150] NET: Registered protocol family 16
[    0.168005] cpuidle: using governor ladder
[    0.184004] cpuidle: using governor menu
[    0.184033] ACPI: bus type PCI registered
[    0.184035] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.184126] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.184128] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.184138] PCI: Using configuration type 1 for base access
[    0.184147] dmi type 0xB1 record - unknown flag
[    0.184181] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.184182] mtrr: probably your BIOS does not setup all CPUs.
[    0.184182] mtrr: corrected configuration.
[    0.200051] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.200074] ACPI: Added _OSI(Module Device)
[    0.200075] ACPI: Added _OSI(Processor Device)
[    0.200077] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.200078] ACPI: Added _OSI(Processor Aggregator Device)
[    0.209042] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.214174] ACPI: Dynamic OEM Table Load:
[    0.214181] ACPI: SSDT 0xFFFF8E3E3B467980 000043 (v01 LMPWR  DELLLOM  00001001 INTL 20050624)
[    0.214531] ACPI: Dynamic OEM Table Load:
[    0.214537] ACPI: SSDT 0xFFFF8E3E3B54E400 000286 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.214760] ACPI: Dynamic OEM Table Load:
[    0.214767] ACPI: SSDT 0xFFFF8E3E3B562800 0005E5 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.215033] ACPI: Dynamic OEM Table Load:
[    0.215033] ACPI: SSDT 0xFFFF8E3E3B4C8700 0000C4 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
[    0.215033] ACPI: Dynamic OEM Table Load:
[    0.215033] ACPI: SSDT 0xFFFF8E3E3B4F4240 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
[    0.216015] ACPI: Interpreter enabled
[    0.216034] ACPI: (supports S0 S3 S4 S5)
[    0.216036] ACPI: Using IOAPIC for interrupt routing
[    0.216066] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.238170] acpi PNP0C15:00: ACPI dock station (docks/bays count: 1)
[    0.265251] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.267561] acpi LNXIOBAY:01: ACPI dock station (docks/bays count: 3)
[    0.285169] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.285174] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.285180] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.285190] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.294352] PCI host bridge to bus 0000:00
[    0.294355] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.294357] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.294359] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.294361] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.294363] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff window]
[    0.294365] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
[    0.294366] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window]
[    0.294368] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window]
[    0.294370] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window]
[    0.294372] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.294373] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window]
[    0.294375] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window]
[    0.294377] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window]
[    0.294379] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.294390] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.294538] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[    0.294590] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.294752] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.294811] pci 0000:00:1a.0: reg 0x20: [io  0x6f20-0x6f3f]
[    0.296730] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.296797] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.296857] pci 0000:00:1a.1: reg 0x20: [io  0x6f00-0x6f1f]
[    0.298788] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.298866] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.298889] pci 0000:00:1a.7: reg 0x10: [mem 0xfed1c400-0xfed1c7ff]
[    0.298997] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.300900] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.300974] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.301001] pci 0000:00:1b.0: reg 0x10: [mem 0xf6ffc000-0xf6ffffff 64bit]
[    0.301118] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.301198] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.301267] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.301384] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.301464] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.301533] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    0.301649] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.301729] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.301799] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[    0.301915] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.302023] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.302096] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[    0.302213] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.302293] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.302358] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.302417] pci 0000:00:1d.0: reg 0x20: [io  0x6f80-0x6f9f]
[    0.304267] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.304332] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.304391] pci 0000:00:1d.1: reg 0x20: [io  0x6f60-0x6f7f]
[    0.306256] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.306321] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.306380] pci 0000:00:1d.2: reg 0x20: [io  0x6f40-0x6f5f]
[    0.308301] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.308378] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.308401] pci 0000:00:1d.7: reg 0x10: [mem 0xfed1c000-0xfed1c3ff]
[    0.308510] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.310385] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.310453] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.310597] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.310665] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.310784] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.310790] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.310794] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.310800] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.310951] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.310969] pci 0000:00:1f.1: reg 0x10: [io  0x01f0-0x01f7]
[    0.310981] pci 0000:00:1f.1: reg 0x14: [io  0x03f4-0x03f7]
[    0.310993] pci 0000:00:1f.1: reg 0x18: [io  0x0170-0x0177]
[    0.311005] pci 0000:00:1f.1: reg 0x1c: [io  0x0374-0x0377]
[    0.311018] pci 0000:00:1f.1: reg 0x20: [io  0x6fa0-0x6faf]
[    0.311045] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.311046] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.311048] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.311050] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.311178] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.311201] pci 0000:00:1f.2: reg 0x10: [io  0x6eb0-0x6eb7]
[    0.311213] pci 0000:00:1f.2: reg 0x14: [io  0x6eb8-0x6ebb]
[    0.311225] pci 0000:00:1f.2: reg 0x18: [io  0x6ec0-0x6ec7]
[    0.311238] pci 0000:00:1f.2: reg 0x1c: [io  0x6ec8-0x6ecb]
[    0.311250] pci 0000:00:1f.2: reg 0x20: [io  0x6ee0-0x6eff]
[    0.311262] pci 0000:00:1f.2: reg 0x24: [mem 0xf6ffb800-0xf6ffbfff]
[    0.311327] pci 0000:00:1f.2: PME# supported from D3hot
[    0.311453] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.311471] pci 0000:00:1f.3: reg 0x10: [mem 0xf6ffb700-0xf6ffb7ff]
[    0.311514] pci 0000:00:1f.3: reg 0x20: [io  0x10c0-0x10df]
[    0.311728] pci 0000:01:00.0: [10de:042b] type 00 class 0x030000
[    0.311751] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
[    0.311772] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.311792] pci 0000:01:00.0: reg 0x1c: [mem 0xf2000000-0xf3ffffff 64bit]
[    0.311806] pci 0000:01:00.0: reg 0x24: [io  0xef00-0xef7f]
[    0.311821] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.312008] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.312011] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.312014] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf6efffff]
[    0.312019] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.312102] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.312221] pci 0000:0c:00.0: [14e4:4328] type 00 class 0x028000
[    0.312258] pci 0000:0c:00.0: reg 0x10: [mem 0xf1ffc000-0xf1ffffff 64bit]
[    0.312283] pci 0000:0c:00.0: reg 0x18: [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.312444] pci 0000:0c:00.0: supports D1 D2
[    0.312446] pci 0000:0c:00.0: PME# supported from D3hot D3cold
[    0.324023] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.324031] pci 0000:00:1c.1:   bridge window [mem 0xf1f00000-0xf1ffffff]
[    0.324039] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.324150] acpiphp: Slot [1] registered
[    0.324156] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.324161] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.324166] pci 0000:00:1c.3:   bridge window [mem 0xf1c00000-0xf1efffff]
[    0.324174] pci 0000:00:1c.3:   bridge window [mem 0xf0100000-0xf03fffff 64bit pref]
[    0.324294] pci 0000:09:00.0: [14e4:1673] type 00 class 0x020000
[    0.324331] pci 0000:09:00.0: reg 0x10: [mem 0xf1bf0000-0xf1bfffff 64bit]
[    0.324534] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    0.336022] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.336030] pci 0000:00:1c.5:   bridge window [mem 0xf1b00000-0xf1bfffff]
[    0.336139] pci 0000:03:01.0: [1217:7135] type 02 class 0x060700
[    0.336161] pci 0000:03:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.336208] pci 0000:03:01.0: supports D1 D2
[    0.336210] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.336311] pci 0000:03:01.4: [1217:00f7] type 00 class 0x0c0010
[    0.336332] pci 0000:03:01.4: reg 0x10: [mem 0xf1aff000-0xf1afffff]
[    0.336344] pci 0000:03:01.4: reg 0x14: [mem 0xf1afe800-0xf1afefff]
[    0.336435] pci 0000:03:01.4: supports D1 D2
[    0.336437] pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.336571] pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode)
[    0.336579] pci 0000:00:1e.0:   bridge window [mem 0xf1a00000-0xf1afffff]
[    0.336587] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.336589] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336591] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336593] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.336595] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xf7ffffff window] (subtractive decode)
[    0.336597] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode)
[    0.336599] pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode)
[    0.336601] pci 0000:00:1e.0:   bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode)
[    0.336603] pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode)
[    0.336605] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.336607] pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode)
[    0.336609] pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode)
[    0.336611] pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode)
[    0.336678] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under [bus 03-04] (conflicts with (null) [bus 03-04])
[    0.336683] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 07
[    0.336686] pci_bus 0000:04: busn_res: can not insert [bus 04-07] under [bus 03-04] (conflicts with (null) [bus 03-04])
[    0.336690] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-04]
[    0.336694] pci 0000:00:1e.0: bridge has subordinate 04 but max busn 07
[    0.348972] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5
[    0.349076] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
[    0.349176] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11)
[    0.349276] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11)
[    0.349377] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.349481] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.349585] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.349675] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.350052] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.352026] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.352026] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.352026] vgaarb: loaded
[    0.352026] vgaarb: bridge control possible 0000:01:00.0
[    0.352098] PCI: Using ACPI for IRQ routing
[    0.354558] PCI: pci_cache_line_size set to 64 bytes
[    0.354647] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.354649] e820: reserve RAM buffer [mem 0xbfe5a800-0xbfffffff]
[    0.354823] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.354823] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.354823] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.356032] clocksource: Switched to clocksource hpet
[    0.367308] VFS: Disk quotas dquot_6.6.0
[    0.367355] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.367500] pnp: PnP ACPI init
[    0.367633] pnp 00:00: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.367685] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.367736] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.367833] system 00:03: [io  0x0c80-0x0caf] has been reserved
[    0.367836] system 00:03: [io  0x0cc0-0x0cff] could not be reserved
[    0.367840] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.367945] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.367949] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.374474] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.382228] system 00:06: [io  0x0cb0-0x0cbb] has been reserved
[    0.382231] system 00:06: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.382235] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.385107] pnp 00:07: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.385110] pnp 00:07: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.385153] system 00:07: [io  0x0900-0x097f] has been reserved
[    0.385155] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.385159] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.385190] pnp 00:08: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.385192] pnp 00:08: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.385195] pnp 00:08: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.385197] pnp 00:08: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.385241] system 00:08: [io  0xf400-0xf4fe] has been reserved
[    0.385243] system 00:08: [io  0x1080-0x10bf] has been reserved
[    0.385245] system 00:08: [io  0x10c0-0x10df] has been reserved
[    0.385248] system 00:08: [io  0x0809] has been reserved
[    0.385251] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.397617] system 00:09: [mem 0x00000000-0x0009efff] could not be reserved
[    0.397620] system 00:09: [mem 0x0009f000-0x0009ffff] could not be reserved
[    0.397622] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.397624] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.397627] system 00:09: [mem 0x00100000-0xbfe5a7ff] could not be reserved
[    0.397629] system 00:09: [mem 0xbfe5a800-0xbfefffff] has been reserved
[    0.397631] system 00:09: [mem 0xbff00000-0xbfffffff] has been reserved
[    0.397634] system 00:09: [mem 0xbff00000-0xc06fffff] could not be reserved
[    0.397636] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[    0.397638] system 00:09: [mem 0xffa00000-0xffbfffff] has been reserved
[    0.397641] system 00:09: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.397643] system 00:09: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.397647] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.397649] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.397651] system 00:09: [mem 0xfeda0000-0xfeda3fff] has been reserved
[    0.397653] system 00:09: [mem 0xfeda4000-0xfeda4fff] has been reserved
[    0.397656] system 00:09: [mem 0xfeda5000-0xfeda5fff] has been reserved
[    0.397658] system 00:09: [mem 0xfeda6000-0xfeda6fff] has been reserved
[    0.397660] system 00:09: [mem 0xfed18000-0xfed1bfff] has been reserved
[    0.397662] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.397666] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.397726] pnp: PnP ACPI: found 10 devices
[    0.405486] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.405513] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[    0.405516] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[    0.405519] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[    0.405531] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 0c] add_size 1000
[    0.405552] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 09] add_size 1000
[    0.405554] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[    0.405575] pci 0000:03:01.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.405577] pci 0000:03:01.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.405580] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 03-04] add_size 1000
[    0.405591] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.405593] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.405595] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.405598] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.405600] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.405602] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.405604] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.405606] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.405609] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.405611] pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.405613] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.405615] pci 0000:00:1c.5: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.405617] pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.405619] pci 0000:00:1e.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.405626] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.405634] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.405642] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.405645] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.405648] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.405650] pci 0000:00:1c.5: BAR 13: assigned [io  0x4000-0x4fff]
[    0.405653] pci 0000:00:1e.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.405658] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[    0.405661] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.405663] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.405667] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf6efffff]
[    0.405670] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.405674] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.405678] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.405684] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.405688] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.405696] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.405699] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.405706] pci 0000:00:1c.1:   bridge window [mem 0xf1f00000-0xf1ffffff]
[    0.405710] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.405718] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.405722] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.405728] pci 0000:00:1c.3:   bridge window [mem 0xf1c00000-0xf1efffff]
[    0.405732] pci 0000:00:1c.3:   bridge window [mem 0xf0100000-0xf03fffff 64bit pref]
[    0.405740] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.405743] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.405749] pci 0000:00:1c.5:   bridge window [mem 0xf1b00000-0xf1bfffff]
[    0.405754] pci 0000:00:1c.5:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.405765] pci 0000:03:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.405767] pci 0000:03:01.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.405769] pci 0000:03:01.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.405772] pci 0000:03:01.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.405774] pci 0000:03:01.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.405776] pci 0000:03:01.0: res[13]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.405778] pci 0000:03:01.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.405780] pci 0000:03:01.0: res[14]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.405784] pci 0000:03:01.0: BAR 0: assigned [mem 0xc4000000-0xc4000fff]
[    0.405791] pci 0000:03:01.0: BAR 15: assigned [mem 0xc8000000-0xcbffffff pref]
[    0.405794] pci 0000:03:01.0: BAR 16: assigned [mem 0xcc000000-0xcfffffff]
[    0.405796] pci 0000:03:01.0: BAR 13: assigned [io  0x5000-0x50ff]
[    0.405798] pci 0000:03:01.0: BAR 14: assigned [io  0x5400-0x54ff]
[    0.405801] pci 0000:03:01.0: CardBus bridge to [bus 04-07]
[    0.405803] pci 0000:03:01.0:   bridge window [io  0x5000-0x50ff]
[    0.405808] pci 0000:03:01.0:   bridge window [io  0x5400-0x54ff]
[    0.405813] pci 0000:03:01.0:   bridge window [mem 0xc8000000-0xcbffffff pref]
[    0.405817] pci 0000:03:01.0:   bridge window [mem 0xcc000000-0xcfffffff]
[    0.405823] pci 0000:00:1e.0: PCI bridge to [bus 03-04]
[    0.405826] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[    0.405832] pci 0000:00:1e.0:   bridge window [mem 0xf1a00000-0xf1afffff]
[    0.405844] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.405846] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.405848] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.405849] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.405851] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.405853] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.405855] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.405857] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.405859] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.405861] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff window]
[    0.405862] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfedfffff window]
[    0.405864] pci_bus 0000:00: resource 15 [mem 0xfee10000-0xff9fffff window]
[    0.405866] pci_bus 0000:00: resource 16 [mem 0xffc00000-0xffdfffff window]
[    0.405868] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.405870] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf6efffff]
[    0.405872] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.405874] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.405876] pci_bus 0000:0b: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.405878] pci_bus 0000:0b: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.405880] pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
[    0.405881] pci_bus 0000:0c: resource 1 [mem 0xf1f00000-0xf1ffffff]
[    0.405883] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.405885] pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
[    0.405887] pci_bus 0000:0d: resource 1 [mem 0xf1c00000-0xf1efffff]
[    0.405889] pci_bus 0000:0d: resource 2 [mem 0xf0100000-0xf03fffff 64bit pref]
[    0.405891] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    0.405893] pci_bus 0000:09: resource 1 [mem 0xf1b00000-0xf1bfffff]
[    0.405895] pci_bus 0000:09: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.405896] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.405898] pci_bus 0000:03: resource 1 [mem 0xf1a00000-0xf1afffff]
[    0.405900] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.405902] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.405904] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.405906] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.405907] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xf7ffffff window]
[    0.405909] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff window]
[    0.405911] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff window]
[    0.405913] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[    0.405915] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff window]
[    0.405917] pci_bus 0000:03: resource 13 [mem 0xfed40000-0xfed44fff window]
[    0.405919] pci_bus 0000:03: resource 14 [mem 0xfeda7000-0xfedfffff window]
[    0.405920] pci_bus 0000:03: resource 15 [mem 0xfee10000-0xff9fffff window]
[    0.405922] pci_bus 0000:03: resource 16 [mem 0xffc00000-0xffdfffff window]
[    0.405924] pci_bus 0000:04: resource 0 [io  0x5000-0x50ff]
[    0.405926] pci_bus 0000:04: resource 1 [io  0x5400-0x54ff]
[    0.405928] pci_bus 0000:04: resource 2 [mem 0xc8000000-0xcbffffff pref]
[    0.405930] pci_bus 0000:04: resource 3 [mem 0xcc000000-0xcfffffff]
[    0.406083] NET: Registered protocol family 2
[    0.406324] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.406465] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.406675] TCP: Hash tables configured (established 32768 bind 32768)
[    0.406741] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.406771] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.406852] NET: Registered protocol family 1
[    0.409515] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.409534] PCI: CLS 64 bytes, default 64
[    0.409610] Unpacking initramfs...
[    0.852578] Freeing initrd memory: 18732K (ffff8e3db5b59000 - ffff8e3db6da4000)
[    0.853184] audit: initializing netlink subsys (disabled)
[    0.853218] audit: type=2000 audit(1503833232.852:1): initialized
[    0.853784] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.853818] zbud: loaded
[    0.854716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.854753] io scheduler noop registered
[    0.854754] io scheduler deadline registered
[    0.854779] io scheduler cfq registered (default)
[    0.856423] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.856432] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.856456] intel_idle: does not run on family 6 model 15
[    0.856562] Monitor-Mwait will be used to enter C-1 state
[    0.856574] Monitor-Mwait will be used to enter C-2 state
[    0.856584] Monitor-Mwait will be used to enter C-3 state
[    0.856592] tsc: Marking TSC unstable due to TSC halts in idle
[    0.857026] GHES: HEST is not enabled!
[    0.857117] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.877917] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.878531] Linux agpgart interface v0.103
[    0.878742] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.878743] AMD IOMMUv2 functionality not available on this system
[    0.879014] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.882214] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.882220] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.882455] mousedev: PS/2 mouse device common for all mice
[    0.882617] rtc_cmos 00:02: RTC can wake from S4
[    0.882816] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.882858] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.882905] ledtrig-cpu: registered to indicate activity on CPUs
[    0.883585] NET: Registered protocol family 10
[    0.883908] mip6: Mobile IPv6
[    0.883910] NET: Registered protocol family 17
[    0.883913] mpls_gso: MPLS GSO support
[    0.884149] microcode: sig=0x6fd, pf=0x80, revision=0xa4
[    0.884216] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.884420] registered taskstats version 1
[    0.884437] zswap: loaded using pool lzo/zbud
[    0.884588] ima: No TPM chip found, activating TPM-bypass!
[    0.885128] rtc_cmos 00:02: setting system clock to 2017-08-27 11:27:13 UTC (1503833233)
[    0.885184] PM: Hibernation image not present or could not be loaded.
[    0.887160] Freeing unused kernel memory: 1392K (ffffffffa231e000 - ffffffffa247a000)
[    0.887162] Write protecting the kernel read-only data: 12288k
[    0.888655] Freeing unused kernel memory: 1988K (ffff8e3e3540f000 - ffff8e3e35600000)
[    0.892982] Freeing unused kernel memory: 1240K (ffff8e3e358ca000 - ffff8e3e35a00000)
[    0.893078] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.900999] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.919387] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.919495] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.919510] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.920834] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.920883] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.922679] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.922773] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.922796] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.923257] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.923347] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.971076] ACPI: bus type USB registered
[    0.971114] usbcore: registered new interface driver usbfs
[    0.971132] usbcore: registered new interface driver hub
[    0.971173] usbcore: registered new device driver usb
[    0.971882] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.972143] ehci-pci: EHCI PCI platform driver
[    0.972984] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.972995] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.973013] ehci-pci 0000:00:1a.7: debug port 1
[    0.975090] uhci_hcd: USB Universal Host Controller Interface driver
[    0.976950] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    0.977314] thermal LNXTHERM:00: registered as thermal_zone0
[    0.977316] ACPI: Thermal Zone [THM] (34 C)
[    0.981887] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    0.996136] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.996230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.996233] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.996235] usb usb1: Product: EHCI Host Controller
[    0.996237] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[    0.996238] usb usb1: SerialNumber: 0000:00:1a.7
[    0.996668] hub 1-0:1.0: USB hub found
[    0.996678] hub 1-0:1.0: 4 ports detected
[    0.997221] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.997229] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.997245] ehci-pci 0000:00:1d.7: debug port 1
[    1.001179] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.002469] pps_core: LinuxPPS API ver. 1 registered
[    1.002471] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.002744] PTP clock support registered
[    1.003671] tg3.c:v3.137 (May 11, 2014)
[    1.004781] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    1.007328] SCSI subsystem initialized
[    1.016082] libata version 3.00 loaded.
[    1.020092] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.020194] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.020196] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.020198] usb usb2: Product: EHCI Host Controller
[    1.020200] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[    1.020202] usb usb2: SerialNumber: 0000:00:1d.7
[    1.020421] hub 2-0:1.0: USB hub found
[    1.020430] hub 2-0:1.0: 6 ports detected
[    1.021015] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.021023] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.021034] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.021060] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[    1.021156] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.021158] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.021160] usb usb3: Product: UHCI Host Controller
[    1.021162] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    1.021164] usb usb3: SerialNumber: 0000:00:1a.0
[    1.021348] hub 3-0:1.0: USB hub found
[    1.021359] hub 3-0:1.0: 2 ports detected
[    1.021726] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.021732] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.021741] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.021773] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[    1.021998] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.022000] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.022002] usb usb4: Product: UHCI Host Controller
[    1.022004] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    1.022005] usb usb4: SerialNumber: 0000:00:1a.1
[    1.022453] hub 4-0:1.0: USB hub found
[    1.022463] hub 4-0:1.0: 2 ports detected
[    1.022811] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.022818] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.022826] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.022849] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[    1.023074] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.023077] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.023079] usb usb5: Product: UHCI Host Controller
[    1.023081] usb usb5: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    1.023082] usb usb5: SerialNumber: 0000:00:1d.0
[    1.023632] hub 5-0:1.0: USB hub found
[    1.023642] hub 5-0:1.0: 2 ports detected
[    1.024518] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.024527] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.024536] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.024559] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[    1.024831] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.024834] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.024836] usb usb6: Product: UHCI Host Controller
[    1.024842] usb usb6: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    1.024844] usb usb6: SerialNumber: 0000:00:1d.1
[    1.025054] hub 6-0:1.0: USB hub found
[    1.025259] hub 6-0:1.0: 2 ports detected
[    1.026043] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.026051] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.026061] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.026116] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    1.026205] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.026208] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.026209] usb usb7: Product: UHCI Host Controller
[    1.026211] usb usb7: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    1.026217] usb usb7: SerialNumber: 0000:00:1d.2
[    1.026722] hub 7-0:1.0: USB hub found
[    1.026730] hub 7-0:1.0: 2 ports detected
[    1.027671] ata_piix 0000:00:1f.1: version 2.13
[    1.043355] tg3 0000:09:00.0 eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:1c:23:af:27:77
[    1.043358] tg3 0000:09:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    1.043360] tg3 0000:09:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.043363] tg3 0000:09:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.056088] scsi host0: ata_piix
[    1.063372] scsi host1: ata_piix
[    1.063474] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[    1.063476] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[    1.063569] ahci 0000:00:1f.2: version 3.0
[    1.063955] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[    1.063958] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[    1.064091] firewire_ohci 0000:03:01.4: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
[    1.067128] ata2: port disabled--ignoring
[    1.068558] tg3 0000:09:00.0 enp9s0: renamed from eth0
[    1.080099] ssb: Found chip with id 0x4321, rev 0x03 and package 0x00
[    1.080108] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243)
[    1.080116] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0C, vendor 0x4243)
[    1.080125] ssb: Core 2 found: PCI-E (cc 0x820, rev 0x04, vendor 0x4243)
[    1.080133] ssb: Core 3 found: PCI (cc 0x804, rev 0x0D, vendor 0x4243)
[    1.080141] ssb: Core 4 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243)
[    1.080636] scsi host2: ahci
[    1.080786] scsi host3: ahci
[    1.080923] scsi host4: ahci
[    1.081011] ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 29
[    1.081013] ata4: DUMMY
[    1.081015] ata5: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 29
[    1.081390] i801_smbus 0000:00:1f.3: SMBus using polling
[    1.180195] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
[    1.244433] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D600, max UDMA/33
[    1.268613] ata1.00: configured for UDMA/33
[    1.274610] scsi 0:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632H D600 PQ: 0 ANSI: 5
[    1.392232] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.392288] ata5: SATA link down (SStatus 0 SControl 300)
[    1.393133] ata3.00: ATA-8: WDC WD1600BJKT-75F4T0, 11.01A11, max UDMA/133
[    1.393134] ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[    1.394116] ata3.00: configured for UDMA/133
[    1.394419] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600BJKT-7 1A11 PQ: 0 ANSI: 5
[    1.424521] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.424637] sd 2:0:0:0: [sda] Write Protect is off
[    1.424640] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.424668] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.441713] random: fast init done
[    1.441744] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.441747] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.442058] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.474112]  sda: sda1 sda2 < sda5 sda6 >
[    1.474752] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.520053] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    1.548085] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    1.596246] firewire_core 0000:03:01.4: created device fw0: GUID 4d4fc00017861860, S400
[    1.713317] usb 7-1: New USB device found, idVendor=0b97, idProduct=7761
[    1.713322] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.715382] hub 7-1:1.0: USB hub found
[    1.717290] hub 7-1:1.0: 4 ports detected
[    1.723402] usb 3-2: New USB device found, idVendor=413c, idProduct=8140
[    1.723406] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.884063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39833dbe06c, max_idle_ns: 881590697125 ns
[    1.968252] PM: Starting manual resume from disk
[    1.968256] PM: Hibernation image partition 8:5 present
[    1.968257] PM: Looking for hibernation image.
[    1.968481] PM: Image not found (code -22)
[    1.968483] PM: Hibernation image not present or could not be loaded.
[    2.012253] usb 7-1.2: new full-speed USB device number 3 using uhci_hcd
[    2.148307] usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772
[    2.148312] usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.148315] usb 7-1.2: Product: O2Micro CCID SC Reader
[    2.148318] usb 7-1.2: Manufacturer: O2
kilter
 
Posts: 4
Joined: 2017-08-27 16:06

Re: post-install health check

Postby kilter » 2017-10-22 22:09

Part 2:
Code: Select all
[    2.183432] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.364403] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input3
[    2.384841] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input2
[    3.227112] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.294036] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.294193] systemd[1]: Detected architecture x86-64.
[    3.301789] systemd[1]: Set hostname to <debian>.
[    3.905291] random: crng init done
[    4.171557] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.171643] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.171863] systemd[1]: Created slice System Slice.
[    4.172049] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.172909] systemd[1]: Mounting Huge Pages File System...
[    4.173189] systemd[1]: Created slice system-getty.slice.
[    4.173400] systemd[1]: Created slice User and Session Slice.
[    4.620419] lp: driver loaded but no devices found
[    4.623261] ppdev: user-space parallel port driver
[    4.732034] [drm] Initialized
[    4.833594] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    5.014238] systemd-journald[198]: Received request to flush runtime journal from PID 1
[    5.153862] nvidia: loading out-of-tree module taints kernel.
[    5.153875] nvidia: module license 'NVIDIA' taints kernel.
[    5.153877] Disabling lock debugging due to kernel taint
[    5.178101] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    5.178531] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[    5.178541] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.102  Mon Jan 16 13:06:29 PST 2017

[    6.010714] ACPI: Battery Slot [BAT0] (battery present)
[    6.011235] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    6.011246] ACPI: Lid Switch [LID]
[    6.011283] ACPI: Battery Slot [BAT1] (battery absent)
[    6.011363] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    6.011366] ACPI: Power Button [PBTN]
[    6.011438] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[    6.011440] ACPI: Sleep Button [SBTN]
[    6.013838] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    6.014243] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input7
[    6.014305] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    6.018778] ACPI: AC Adapter [AC] (on-line)
[    6.064434] wmi: Mapper loaded
[    6.172760] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.284767] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    6.284828] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    6.357378] yenta_cardbus 0000:03:01.0: enabling device (0000 -> 0003)
[    6.357499] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01fe]
[    6.357523] yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[    6.493010] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[    6.493014] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[    6.493018] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[    6.493026] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[    6.493029] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0xf1a00000-0xf1afffff]
[    6.493031] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf1a00000-0xf1afffff:
[    6.493041]  excluding 0xf1af0000-0xf1afffff
[    6.744736] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9205: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    6.744739] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.744742] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[    6.744743] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    6.744745] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x21/0x0
[    6.744747] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    6.744749] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0xc
[    6.744751] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[    6.774483] Bluetooth: Core ver 2.22
[    6.774514] NET: Registered protocol family 31
[    6.774516] Bluetooth: HCI device and connection manager initialized
[    6.774522] Bluetooth: HCI socket layer initialized
[    6.774525] Bluetooth: L2CAP socket layer initialized
[    6.774535] Bluetooth: SCO socket layer initialized
[    6.857402] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    6.859338] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    6.859487] usbcore: registered new interface driver btusb
[    6.859707] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    6.866759] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    6.997459] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    7.017553] dell_wmi: Detected Dell WMI interface version 1
[    7.017630] input: Dell WMI hotkeys as /devices/virtual/input/input12
[    7.046208] iTCO_vendor_support: vendor-support=0
[    7.046973] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.047041] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[    7.047643] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.104866] intel_powerclamp: No package C-state available
[    7.140416] intel_powerclamp: No package C-state available
[    7.194334] b43-phy0: Broadcom 4321 WLAN found (core revision 12)
[    7.236055] b43-phy0: Found PHY: Analog 5, Type 4 (N), Revision 2
[    7.236082] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2055, Revision 4, Version 0
[    7.256201] Broadcom 43xx driver loaded [ Features: PNLS ]
[    7.323794] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[    7.323804]  excluding 0xc0000-0xcffff 0xe0000-0xfffff
[    7.323835] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[    7.323851]  excluding 0xa0000000-0xa0ffffff
[    7.323870] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[    7.323886]  excluding 0x60000000-0x60ffffff
[    7.441095] b43 ssb0:0: firmware: direct-loading firmware b43/ucode11.fw
[    7.444567] b43 ssb0:0: firmware: direct-loading firmware b43/n0initvals11.fw
[    7.454015] b43 ssb0:0: firmware: direct-loading firmware b43/n0bsinitvals11.fw
[    7.485025] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.529193] dell_laptop: Using i8042 filter function for receiving events
[    8.706952] Adding 3142652k swap on /dev/sda5.  Priority:-1 extents:1 across:3142652k FS
[    9.742668] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   12.041972] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.041975] Bluetooth: BNEP filters: protocol multicast
[   12.041981] Bluetooth: BNEP socket layer initialized
[   13.673780] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
[   13.709251] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
[   13.715048] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.920091] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   14.104521] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.356070] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   14.532113] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.880432] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.354569] tg3 0000:09:00.0 enp9s0: Link is up at 100 Mbps, full duplex
[   15.354584] tg3 0000:09:00.0 enp9s0: Flow control is on for TX and on for RX
[   15.354605] IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
[   23.608250] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   23.792552] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.832903] wlan0: authenticate with 12:be:f5:03:92:09
[   23.972414] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[   23.975387] wlan0: authenticated
[   23.976335] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[   23.985560] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[   23.985786] wlan0: associated
[   23.985865] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   24.044253] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[   25.238356] IPv6: wlan0: IPv6 duplicate address fe80::3d33:58f8:b15e:ecac detected!
[   25.862789] FS-Cache: Loaded
[   25.871502] Key type dns_resolver registered
[   25.986602] IPv6: wlan0: IPv6 duplicate address fe80::1b15:e67d:7fe7:fd35 detected!
[   26.027918] FS-Cache: Netfs 'cifs' registered for caching
[   26.027978] Key type cifs.spnego registered
[   26.027982] Key type cifs.idmap registered
[   26.813138] IPv6: wlan0: IPv6 duplicate address fe80::9ede:e996:4b68:1d22 detected!
[   28.138664] CIFS VFS: Send error in SETFSUnixInfo = -5
[   28.138762] CIFS VFS: Negotiating Unix capabilities with the server failed. Consider mounting with the Unix Extensions disabled if problems are found by specifying the nounix mount option.
[   35.214501] fuse init (API version 7.26)
[   80.655561] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[   80.684272] wlan0: authenticate with 10:be:f5:04:92:f9
[   80.824437] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[   81.028187] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[   81.029648] wlan0: authenticated
[   81.030103] wlan0: associating with AP with corrupt probe response
[   81.032244] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[   81.034918] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=7)
[   81.035249] wlan0: associated
[  129.095843] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[  129.248148] wlan0: authenticate with 12:be:f5:03:92:09
[  129.388228] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[  129.592186] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[  129.602179] wlan0: authenticated
[  129.604076] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[  129.605341] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[  129.605578] wlan0: associated
[  129.617213] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[  148.446092] CIFS VFS: Server 192.168.1.1 has not responded in 120 seconds. Reconnecting...
[  186.639034] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[  186.664157] wlan0: authenticate with 10:be:f5:04:92:f9
[  186.804267] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[  186.807091] wlan0: authenticated
[  186.815488] wlan0: associating with AP with corrupt probe response
[  186.816223] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[  186.818954] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=7)
[  186.819401] wlan0: associated
[  275.087547] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[  275.240311] wlan0: authenticate with 12:be:f5:03:92:09
[  275.380206] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[  275.386924] wlan0: authenticated
[  275.392046] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[  275.397042] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[  275.397271] wlan0: associated
[  275.434935] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[  372.647951] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[  372.676152] wlan0: authenticate with 10:be:f5:04:92:f9
[  372.816438] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[  373.020188] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[  373.021655] wlan0: authenticated
[  373.024279] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[  373.027855] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=7)
[  373.028305] wlan0: associated
[  498.083628] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[  498.236147] wlan0: authenticate with 12:be:f5:03:92:09
[  498.376409] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[  498.580310] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[  498.588937] wlan0: authenticated
[  498.592079] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[  498.594223] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[  498.594465] wlan0: associated
[  498.668102] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[  612.639578] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[  612.668140] wlan0: authenticate with 10:be:f5:04:92:f9
[  612.808269] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[  613.012228] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[  613.013761] wlan0: authenticated
[  613.014217] wlan0: associating with AP with corrupt probe response
[  613.016074] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[  613.018987] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[  613.019325] wlan0: associated
[  858.023490] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[  858.176189] wlan0: authenticate with 12:be:f5:03:92:09
[  858.316427] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[  858.520232] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[  858.530565] wlan0: authenticated
[  858.532084] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[  858.535876] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[  858.536562] wlan0: associated
[  858.607228] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[  972.657455] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[  972.684256] wlan0: authenticate with 10:be:f5:04:92:f9
[  972.824267] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[  972.826855] wlan0: authenticated
[  972.844065] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[  972.846622] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[  972.847074] wlan0: associated
[ 1218.015346] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 1218.168176] wlan0: authenticate with 12:be:f5:03:92:09
[ 1218.308247] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 1218.330603] wlan0: authenticated
[ 1218.332148] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 1218.333312] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[ 1218.333526] wlan0: associated
[ 1218.339685] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 1332.641160] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 1332.672263] wlan0: authenticate with 10:be:f5:04:92:f9
[ 1332.812430] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 1332.817041] wlan0: authenticated
[ 1332.826779] wlan0: associating with AP with corrupt probe response
[ 1332.828214] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 1332.830852] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 1332.831304] wlan0: associated
[ 1458.163552] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 1458.316175] wlan0: authenticate with 12:be:f5:03:92:09
[ 1458.444327] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 1458.450014] wlan0: authenticated
[ 1458.452219] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 1458.455302] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[ 1458.455528] wlan0: associated
[ 1458.468423] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 1572.645151] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 1572.672329] wlan0: authenticate with 10:be:f5:04:92:f9
[ 1572.812433] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 1573.016184] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 1573.017782] wlan0: authenticated
[ 1573.018268] wlan0: associating with AP with corrupt probe response
[ 1573.020327] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 1573.023078] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 1573.023517] wlan0: associated
[ 1698.112463] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 1698.264289] wlan0: authenticate with 12:be:f5:03:92:09
[ 1698.404427] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 1698.608133] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 1698.609232] wlan0: authenticated
[ 1698.616054] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 1698.619284] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[ 1698.619521] wlan0: associated
[ 1698.699731] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 1812.661934] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 1812.696257] wlan0: authenticate with 10:be:f5:04:92:f9
[ 1812.836383] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 1812.839501] wlan0: authenticated
[ 1812.841737] wlan0: associating with AP with corrupt probe response
[ 1812.844047] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 1812.846729] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 1812.847160] wlan0: associated
[ 1938.015084] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 1938.168149] wlan0: authenticate with 12:be:f5:03:92:09
[ 1938.308392] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 1938.512272] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 1938.514604] wlan0: authenticated
[ 1938.516349] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 1938.519000] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[ 1938.519236] wlan0: associated
[ 1938.521370] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 2052.687720] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 2052.716341] wlan0: authenticate with 10:be:f5:04:92:f9
[ 2052.856219] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 2053.060198] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 2053.061807] wlan0: authenticated
[ 2053.064162] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 2053.067253] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 2053.067616] wlan0: associated
[ 2178.037699] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 2178.192267] wlan0: authenticate with 12:be:f5:03:92:09
[ 2178.332443] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 2178.348680] wlan0: authenticated
[ 2178.352037] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 2178.354057] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[ 2178.354261] wlan0: associated
[ 2178.445049] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 2532.648780] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 2532.680319] wlan0: authenticate with 10:be:f5:04:92:f9
[ 2532.820441] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 2532.824881] wlan0: authenticated
[ 2532.837276] wlan0: associating with AP with corrupt probe response
[ 2532.844072] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 2532.846601] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=7)
[ 2532.847080] wlan0: associated
[ 2778.016479] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 2778.168308] wlan0: authenticate with 12:be:f5:03:92:09
[ 2778.308423] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 2778.512212] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 2778.516890] wlan0: authenticated
[ 2778.520076] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 2778.522273] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=3)
[ 2778.522509] wlan0: associated
[ 2778.612927] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 3012.652712] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 3012.684295] wlan0: authenticate with 10:be:f5:04:92:f9
[ 3012.824429] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 3012.827081] wlan0: authenticated
[ 3012.835116] wlan0: associating with AP with corrupt probe response
[ 3012.836037] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 3012.841197] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 3012.841635] wlan0: associated
[ 3138.029301] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 3138.180171] wlan0: authenticate with 12:be:f5:03:92:09
[ 3138.320425] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 3138.327722] wlan0: authenticated
[ 3138.344051] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 3138.345270] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 3138.345487] wlan0: associated
[ 3138.447183] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 3252.671457] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 3252.700220] wlan0: authenticate with 10:be:f5:04:92:f9
[ 3252.840314] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 3252.843063] wlan0: authenticated
[ 3252.858087] wlan0: associating with AP with corrupt probe response
[ 3252.860094] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 3252.862892] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 3252.863340] wlan0: associated
[ 3618.004627] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 3618.156149] wlan0: authenticate with 12:be:f5:03:92:09
[ 3618.296178] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 3618.500078] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 3618.504788] wlan0: authenticated
[ 3618.508328] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 3618.509226] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 3618.509455] wlan0: associated
[ 3618.704318] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 3732.660407] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 3732.688346] wlan0: authenticate with 10:be:f5:04:92:f9
[ 3732.828493] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 3733.032245] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 3733.033930] wlan0: authenticated
[ 3733.034769] wlan0: associating with AP with corrupt probe response
[ 3733.040058] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 3733.046551] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 3733.046935] wlan0: associated
[ 3978.047500] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 3978.200308] wlan0: authenticate with 12:be:f5:03:92:09
[ 3978.340424] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 3978.544072] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 3978.553837] wlan0: authenticated
[ 3978.556160] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 3978.559187] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 3978.559428] wlan0: associated
[ 3978.641052] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 4092.644260] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 4092.672237] wlan0: authenticate with 10:be:f5:04:92:f9
[ 4092.812435] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 4093.016198] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 4093.017790] wlan0: authenticated
[ 4093.018347] wlan0: associating with AP with corrupt probe response
[ 4093.020115] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 4093.022929] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 4093.023356] wlan0: associated
[ 4218.083571] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 4218.236482] wlan0: authenticate with 12:be:f5:03:92:09
[ 4218.376466] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 4218.580237] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 4218.583175] wlan0: authenticated
[ 4218.585142] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 4218.588359] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 4218.588591] wlan0: associated
[ 4218.667307] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 4332.670008] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 4332.700257] wlan0: authenticate with 10:be:f5:04:92:f9
[ 4332.840500] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 4333.044197] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 4333.046102] wlan0: authenticated
[ 4333.046558] wlan0: associating with AP with corrupt probe response
[ 4333.048067] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 4333.050656] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 4333.051078] wlan0: associated
[ 4458.044194] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 4458.196305] wlan0: authenticate with 12:be:f5:03:92:09
[ 4458.336257] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 4458.540094] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 4458.542625] wlan0: authenticated
[ 4458.544147] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 4458.547974] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 4458.548257] wlan0: associated
[ 4458.591107] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 4692.642201] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 4692.672353] wlan0: authenticate with 10:be:f5:04:92:f9
[ 4692.812429] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 4693.016191] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 4693.017721] wlan0: authenticated
[ 4693.018181] wlan0: associating with AP with corrupt probe response
[ 4693.020261] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 4693.025773] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 4693.026219] wlan0: associated
[ 4818.055805] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 4818.208287] wlan0: authenticate with 12:be:f5:03:92:09
[ 4818.348406] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 4818.360100] wlan0: authenticated
[ 4818.364336] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 4818.372195] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 4818.372421] wlan0: associated
[ 4818.425369] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 4932.646131] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 4932.676320] wlan0: authenticate with 10:be:f5:04:92:f9
[ 4932.816432] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 4933.020189] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 4933.021955] wlan0: authenticated
[ 4933.022482] wlan0: associating with AP with corrupt probe response
[ 4933.024365] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 4933.027190] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 4933.027559] wlan0: associated
[ 5058.016087] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 5058.168137] wlan0: authenticate with 12:be:f5:03:92:09
[ 5058.308271] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 5058.312535] wlan0: authenticated
[ 5058.328050] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 5058.329029] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 5058.329275] wlan0: associated
[ 5058.349127] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 5172.638839] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 5172.668313] wlan0: authenticate with 10:be:f5:04:92:f9
[ 5172.808438] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 5172.817758] wlan0: authenticated
[ 5172.824039] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 5172.826701] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 5172.827155] wlan0: associated
[ 5298.043645] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 5298.196293] wlan0: authenticate with 12:be:f5:03:92:09
[ 5298.336427] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 5298.341015] wlan0: authenticated
[ 5298.352083] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 5298.357110] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 5298.357325] wlan0: associated
[ 5298.375336] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 5532.675826] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 5532.704182] wlan0: authenticate with 10:be:f5:04:92:f9
[ 5532.844440] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 5532.848281] wlan0: authenticated
[ 5532.851879] wlan0: associating with AP with corrupt probe response
[ 5532.852474] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 5532.855177] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=6)
[ 5532.855634] wlan0: associated
[ 5658.035520] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 5658.188307] wlan0: authenticate with 12:be:f5:03:92:09
[ 5658.328223] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 5658.532085] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 5658.532961] wlan0: authenticated
[ 5658.536134] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 5658.536975] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 5658.537203] wlan0: associated
[ 5658.619284] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 5772.664895] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 5772.692236] wlan0: authenticate with 10:be:f5:04:92:f9
[ 5772.832506] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 5772.837677] wlan0: authenticated
[ 5772.853610] wlan0: associating with AP with corrupt probe response
[ 5772.856098] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 5772.858926] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=6)
[ 5772.859375] wlan0: associated
[ 6138.058729] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 6138.212306] wlan0: authenticate with 12:be:f5:03:92:09
[ 6138.352421] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 6138.556254] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 6138.558571] wlan0: authenticated
[ 6138.560100] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 6138.560978] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=3)
[ 6138.561203] wlan0: associated
[ 6138.569073] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 6372.655104] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 6372.684238] wlan0: authenticate with 10:be:f5:04:92:f9
[ 6372.824363] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 6372.826851] wlan0: authenticated
[ 6372.832123] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 6372.834907] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=6)
[ 6372.835332] wlan0: associated
[ 6498.010555] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 6498.160287] wlan0: authenticate with 12:be:f5:03:92:09
[ 6498.300427] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 6498.504262] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 6498.505102] wlan0: authenticated
[ 6498.508301] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 6498.510291] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=3)
[ 6498.510522] wlan0: associated
[ 6498.511515] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 6732.659288] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 6732.688342] wlan0: authenticate with 10:be:f5:04:92:f9
[ 6732.828432] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 6733.032088] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 6733.033664] wlan0: authenticated
[ 6733.034187] wlan0: associating with AP with corrupt probe response
[ 6733.040049] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 6733.042742] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 6733.043090] wlan0: associated
[ 6858.081137] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 6858.236292] wlan0: authenticate with 12:be:f5:03:92:09
[ 6858.376425] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 6858.580227] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 6858.590217] wlan0: authenticated
[ 6858.592396] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 6858.593293] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 6858.593523] wlan0: associated
[ 6858.656533] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 6972.642610] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 6972.676169] wlan0: authenticate with 10:be:f5:04:92:f9
[ 6972.816269] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 6972.828137] wlan0: authenticated
[ 6972.828451] wlan0: associating with AP with corrupt probe response
[ 6972.832158] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 6972.834924] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 6972.835399] wlan0: associated
[ 7098.003852] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 7098.156189] wlan0: authenticate with 12:be:f5:03:92:09
[ 7098.284422] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 7098.488181] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 7098.493219] wlan0: authenticated
[ 7098.496063] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 7098.497028] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 7098.497279] wlan0: associated
[ 7098.581951] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 7332.674219] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 7332.704305] wlan0: authenticate with 10:be:f5:04:92:f9
[ 7332.844421] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 7332.846942] wlan0: authenticated
[ 7332.858106] wlan0: associating with AP with corrupt probe response
[ 7332.860089] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 7332.862939] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 7332.863412] wlan0: associated
[ 7458.036106] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 7458.188306] wlan0: authenticate with 12:be:f5:03:92:09
[ 7458.328385] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 7458.532227] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 7458.537671] wlan0: authenticated
[ 7458.540237] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 7458.543041] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 7458.543273] wlan0: associated
[ 7458.622969] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 7572.679915] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 7572.708286] wlan0: authenticate with 10:be:f5:04:92:f9
[ 7572.848227] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 7573.052204] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 7573.053663] wlan0: authenticated
[ 7573.054120] wlan0: associating with AP with corrupt probe response
[ 7573.056140] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 7573.058886] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 7573.059258] wlan0: associated
[ 7698.051863] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 7698.204291] wlan0: authenticate with 12:be:f5:03:92:09
[ 7698.344432] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 7698.548077] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 7698.558016] wlan0: authenticated
[ 7698.560301] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 7698.561859] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 7698.562090] wlan0: associated
[ 7698.650219] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 7812.650086] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 7812.680355] wlan0: authenticate with 10:be:f5:04:92:f9
[ 7812.820431] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 7812.836432] wlan0: authenticated
[ 7812.836631] wlan0: associating with AP with corrupt probe response
[ 7812.840210] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 7812.843489] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 7812.843870] wlan0: associated
[ 7938.046819] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 7938.204176] wlan0: authenticate with 12:be:f5:03:92:09
[ 7938.344250] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 7938.353873] wlan0: authenticated
[ 7938.368052] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 7938.368832] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 7938.369049] wlan0: associated
[ 7938.369970] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 8172.662856] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 8172.696264] wlan0: authenticate with 10:be:f5:04:92:f9
[ 8172.836330] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 8173.040193] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 8173.043201] wlan0: authenticated
[ 8173.043728] wlan0: associating with AP with corrupt probe response
[ 8173.045337] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 8173.055281] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 8173.055619] wlan0: associated
[ 8298.078212] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 8298.228309] wlan0: authenticate with 12:be:f5:03:92:09
[ 8298.368426] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 8298.378900] wlan0: authenticated
[ 8298.388419] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 8298.399001] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 8298.399243] wlan0: associated
[ 8298.410202] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 8412.680566] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 8412.712185] wlan0: authenticate with 10:be:f5:04:92:f9
[ 8412.852472] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 8413.056072] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 8413.061262] wlan0: authenticated
[ 8413.061697] wlan0: associating with AP with corrupt probe response
[ 8413.064310] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 8413.074252] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 8413.074617] wlan0: associated
[ 8538.040066] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 8538.192306] wlan0: authenticate with 12:be:f5:03:92:09
[ 8538.332431] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 8538.335434] wlan0: authenticated
[ 8538.344080] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 8538.349295] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 8538.349513] wlan0: associated
[ 8538.437240] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 8652.642762] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 8652.672301] wlan0: authenticate with 10:be:f5:04:92:f9
[ 8652.812384] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 8652.831442] wlan0: authenticated
[ 8652.831828] wlan0: associating with AP with corrupt probe response
[ 8652.832076] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 8652.846574] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 8652.846982] wlan0: associated
[ 8778.067085] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 8778.220204] wlan0: authenticate with 12:be:f5:03:92:09
[ 8778.360315] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 8778.369287] wlan0: authenticated
[ 8778.380035] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 8778.388035] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 8778.388275] wlan0: associated
[ 8778.464168] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 8892.647211] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 8892.676240] wlan0: authenticate with 10:be:f5:04:92:f9
[ 8892.816431] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 8892.821634] wlan0: authenticated
[ 8892.830528] wlan0: associating with AP with corrupt probe response
[ 8892.832087] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 8892.842031] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 8892.842404] wlan0: associated
[ 9018.016730] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 9018.168308] wlan0: authenticate with 12:be:f5:03:92:09
[ 9018.308428] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 9018.309663] wlan0: authenticated
[ 9018.324325] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 9018.329300] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 9018.329521] wlan0: associated
[ 9018.388563] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 9252.657634] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 9252.684112] wlan0: authenticate with 10:be:f5:04:92:f9
[ 9252.824273] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 9253.028103] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 9253.029672] wlan0: authenticated
[ 9253.030389] wlan0: associating with AP with corrupt probe response
[ 9253.034358] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 9253.040832] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 9253.041144] wlan0: associated
[ 9378.060877] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 9378.212307] wlan0: authenticate with 12:be:f5:03:92:09
[ 9378.356423] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 9378.560226] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 9378.564358] wlan0: authenticated
[ 9378.568070] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 9378.569337] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=1)
[ 9378.569576] wlan0: associated
[ 9378.633606] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 9492.673110] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 9492.704284] wlan0: authenticate with 10:be:f5:04:92:f9
[ 9492.844436] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 9492.848787] wlan0: authenticated
[ 9492.855299] wlan0: associating with AP with corrupt probe response
[ 9492.859885] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 9492.866872] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 9492.867290] wlan0: associated
[ 9618.019170] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[ 9618.172316] wlan0: authenticate with 12:be:f5:03:92:09
[ 9618.312363] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[ 9618.516241] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[ 9618.519558] wlan0: authenticated
[ 9618.524234] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[ 9618.529548] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=3)
[ 9618.529780] wlan0: associated
[ 9618.557988] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[ 9732.659632] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[ 9732.692241] wlan0: authenticate with 10:be:f5:04:92:f9
[ 9732.832461] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[ 9733.036238] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[ 9733.037732] wlan0: authenticated
[ 9733.038119] wlan0: associating with AP with corrupt probe response
[ 9733.044032] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[ 9733.046941] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[ 9733.047363] wlan0: associated
[ 9745.194348] Bluetooth: RFCOMM TTY layer initialized
[ 9745.194357] Bluetooth: RFCOMM socket layer initialized
[ 9745.194367] Bluetooth: RFCOMM ver 1.11
[ 9750.505686] CIFS VFS: Send error in SETFSUnixInfo = -5
[ 9755.324040] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[10098.047809] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[10098.200149] wlan0: authenticate with 12:be:f5:03:92:09
[10098.340314] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[10098.544193] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[10098.549687] wlan0: authenticated
[10098.552197] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[10098.554394] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[10098.554632] wlan0: associated
[10098.611859] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[10212.665906] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[10212.696171] wlan0: authenticate with 10:be:f5:04:92:f9
[10212.836207] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[10212.842054] wlan0: authenticated
[10212.852334] wlan0: associating with AP with corrupt probe response
[10212.856038] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[10212.858597] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[10212.859078] wlan0: associated
[10216.968454] perf: interrupt took too long (3146 > 3126), lowering kernel.perf_event_max_sample_rate to 63500
[10338.078855] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[10338.220143] wlan0: authenticate with 12:be:f5:03:92:09
[10338.360378] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[10338.564258] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[10338.565086] wlan0: authenticated
[10338.568114] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[10338.568942] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[10338.569170] wlan0: associated
[10338.637838] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[10357.423132] perf: interrupt took too long (3940 > 3932), lowering kernel.perf_event_max_sample_rate to 50750
[10452.646318] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[10452.672103] wlan0: authenticate with 10:be:f5:04:92:f9
[10452.808199] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[10453.012298] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[10453.014415] wlan0: authenticated
[10453.014679] wlan0: associating with AP with corrupt probe response
[10453.016338] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[10453.019056] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[10453.019509] wlan0: associated
[10704.417675] perf: interrupt took too long (4930 > 4925), lowering kernel.perf_event_max_sample_rate to 40500
[11057.835846] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[11057.992407] wlan0: authenticate with 12:be:f5:03:92:09
[11058.136240] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[11058.149267] wlan0: authenticated
[11058.164041] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[11058.166557] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=3)
[11058.166788] wlan0: associated
[11058.202643] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[11172.640161] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[11172.664290] wlan0: authenticate with 10:be:f5:04:92:f9
[11172.808455] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[11173.012066] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[11173.024648] wlan0: authenticated
[11173.024984] wlan0: associating with AP with corrupt probe response
[11173.032256] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[11173.035210] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[11173.035606] wlan0: associated
[11298.019752] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[11298.172349] wlan0: authenticate with 12:be:f5:03:92:09
[11298.312464] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[11298.326652] wlan0: authenticated
[11298.340034] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[11298.345435] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=3)
[11298.345652] wlan0: associated
[11298.433635] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[11412.664344] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[11412.684156] wlan0: authenticate with 10:be:f5:04:92:f9
[11412.824454] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[11413.028283] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[11413.029748] wlan0: authenticated
[11413.031060] wlan0: associating with AP with corrupt probe response
[11413.032303] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[11413.036173] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[11413.036523] wlan0: associated
[11778.005419] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[11778.156156] wlan0: authenticate with 12:be:f5:03:92:09
[11778.288888] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[11778.303779] wlan0: authenticated
[11778.316062] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[11778.318121] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=3)
[11778.318337] wlan0: associated
[11778.384035] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[11892.680472] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[11892.708342] wlan0: authenticate with 10:be:f5:04:92:f9
[11892.848348] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[11892.850409] wlan0: authenticated
[11892.864938] wlan0: associating with AP with corrupt probe response
[11892.868106] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[11892.870669] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[11892.871123] wlan0: associated
[12017.935352] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[12018.088403] wlan0: authenticate with 12:be:f5:03:92:09
[12018.236179] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[12018.440245] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[12018.440747] wlan0: authenticated
[12018.444307] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[12018.446230] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=3)
[12018.446467] wlan0: associated
[12018.512849] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[12132.849669] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[12132.880333] wlan0: authenticate with 10:be:f5:04:92:f9
[12133.020901] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[12133.022905] wlan0: authenticated
[12133.035106] wlan0: associating with AP with corrupt probe response
[12133.040059] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[12133.042734] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[12133.043195] wlan0: associated
[12257.999158] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[12258.160201] wlan0: authenticate with 12:be:f5:03:92:09
[12258.300366] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[12258.323789] wlan0: authenticated
[12258.328070] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[12258.329486] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[12258.329703] wlan0: associated
[12258.336674] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[12492.581698] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[12492.608180] wlan0: authenticate with 10:be:f5:04:92:f9
[12492.748461] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[12492.758834] wlan0: authenticated
[12492.768039] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[12492.770990] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[12492.771483] wlan0: associated
[12617.980732] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[12618.132155] wlan0: authenticate with 12:be:f5:03:92:09
[12618.276409] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[12618.480275] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[12618.483424] wlan0: authenticated
[12618.484193] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[12618.488879] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=2)
[12618.489147] wlan0: associated
[12618.579245] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[12732.724569] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[12732.752221] wlan0: authenticate with 10:be:f5:04:92:f9
[12732.892295] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[12732.904745] wlan0: authenticated
[12732.908560] wlan0: associating with AP with corrupt probe response
[12732.912204] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[12732.914922] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[12732.915190] wlan0: associated
[12977.967895] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[12978.120195] wlan0: authenticate with 12:be:f5:03:92:09
[12978.260347] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[12978.264055] wlan0: authenticated
[12978.288428] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[12978.293709] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=3)
[12978.293929] wlan0: associated
[12978.311997] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[13092.708234] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[13092.736210] wlan0: authenticate with 10:be:f5:04:92:f9
[13092.864384] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[13093.068125] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[13093.069685] wlan0: authenticated
[13093.072306] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[13093.075000] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[13093.075390] wlan0: associated
[13338.116689] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[13338.272241] wlan0: authenticate with 12:be:f5:03:92:09
[13338.412212] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[13338.616123] wlan0: send auth to 12:be:f5:03:92:09 (try 2/3)
[13338.618008] wlan0: authenticated
[13338.624083] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[13338.628094] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=3)
[13338.628312] wlan0: associated
[13338.659111] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[13452.810740] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[13452.842005] wlan0: authenticate with 10:be:f5:04:92:f9
[13452.984470] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[13453.188285] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[13453.189876] wlan0: authenticated
[13453.190401] wlan0: associating with AP with corrupt probe response
[13453.192301] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[13453.197366] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[13453.197822] wlan0: associated
[13578.051457] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[13578.204375] wlan0: authenticate with 12:be:f5:03:92:09
[13578.344357] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[13578.350989] wlan0: authenticated
[13578.356043] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[13578.363189] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=3)
[13578.363417] wlan0: associated
[13578.378384] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[13601.216370] usb 3-2: USB disconnect, device number 2
[13692.689218] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[13692.716342] wlan0: authenticate with 10:be:f5:04:92:f9
[13692.856470] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[13692.858655] wlan0: authenticated
[13692.880118] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[13692.887350] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[13692.887796] wlan0: associated
[13938.123181] wlan0: disconnect from AP 10:be:f5:04:92:f9 for new auth to 12:be:f5:03:92:09
[13938.268194] wlan0: authenticate with 12:be:f5:03:92:09
[13938.408269] wlan0: send auth to 12:be:f5:03:92:09 (try 1/3)
[13938.418322] wlan0: authenticated
[13938.420044] wlan0: associate with 12:be:f5:03:92:09 (try 1/3)
[13938.422864] wlan0: RX AssocResp from 12:be:f5:03:92:09 (capab=0x111 status=0 aid=3)
[13938.423070] wlan0: associated
[13938.520904] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 12:be:f5:03:92:09
[14052.648338] wlan0: disconnect from AP 12:be:f5:03:92:09 for new auth to 10:be:f5:04:92:f9
[14052.676169] wlan0: authenticate with 10:be:f5:04:92:f9
[14052.760219] wlan0: send auth to 10:be:f5:04:92:f9 (try 1/3)
[14052.964046] wlan0: send auth to 10:be:f5:04:92:f9 (try 2/3)
[14052.965447] wlan0: authenticated
[14052.968087] wlan0: associate with 10:be:f5:04:92:f9 (try 1/3)
[14052.970766] wlan0: RX AssocResp from 10:be:f5:04:92:f9 (capab=0x411 status=0 aid=4)
[14052.971136] wlan0: associated
kilter
 
Posts: 4
Joined: 2017-08-27 16:06

Re: post-install health check

Postby kilter » 2017-10-22 22:18

Possibly useful info:
My system is a Dell Latitude D830 laptop.
Following the install, I installed:
Nvidia graphics driver (nvidia-legacy-340xx-kernal-dkms)
broadcom wifi driver (firmware-b43-installer)
Intel microcode
firmware-linux-nonfree

output from lspci:
Code: Select all
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation G86M [Quadro NVS 135M] (rev a1)
03:01.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 21)
03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
09:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Broadcom Limited BCM4321 802.11a/b/g/n (rev 03)


Many thanks for all and any help!
kilter
 
Posts: 4
Joined: 2017-08-27 16:06


Return to System configuration

Who is online

Users browsing this forum: linuxsat, phoenix_art and 9 guests

fashionable