boot messages

Kernels & Hardware, configuring network, installing services

boot messages

Postby paolo1612 » 2017-12-29 18:28

Hallo everyone!
'm a NON professional but happy debian user; I installed unstable (SID) last day: no pain, smooth installation (followed the advice of debian forums on how to properly install sid) but a neverending log message on boot. Could anyone help me, somehow? Thank you very much.
paolo
P.S.: NON RIESCO AD ALLEGARE IL FILE, LO INCOLLO QUI DI SEGUITO, SCUSATE TANTO
[ 0.000000] microcode: microcode updated early to revision 0x5e, date = 2017-04-06
[ 0.000000] Linux version 4.14.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 7.2.0 (Debian 7.2.0-18)) #1 SMP Debian 4.14.7-1 (2017-12-22)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-2-amd64 root=UUID=524c1fcd-5b65-49e4-8ab3-9a69ef338f7d ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7759fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b775a000-0x00000000b778ffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7790000-0x00000000b7b38fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b39000-0x00000000b7b39fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7b3a000-0x00000000b7b3afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7b3b000-0x00000000c47aafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c47ab000-0x00000000c5ee3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c5ee4000-0x00000000c5f0bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c5f0c000-0x00000000c60c7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c60c8000-0x00000000c66effff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c66f0000-0x00000000c7a2dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c7a2e000-0x00000000c7aa1fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c7aa2000-0x00000000c7afffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7b00000-0x00000000c7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000836ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xb775a000 ACPI=0xb775a000 SMBIOS=0xc79a0000 SMBIOS 3.0=0xc799f000 MPS=0xfc9f0 ESRT=0xc2e97318
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/STRIX H270F GAMING, BIOS 0308 01/04/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x837000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 2 base 00C8000000 mask 7FF8000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xc7b00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcc70-0x000fcc7f] mapped at [ffffffffff040c70]
[ 0.000000] esrt: Reserving ESRT space from 0x00000000c2e97318 to 0x00000000c2e97350.
[ 0.000000] Base memory trampoline at [ffff972180095000] 95000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x33f356000, 0x33f356fff] PGTABLE
[ 0.000000] BRK [0x33f357000, 0x33f357fff] PGTABLE
[ 0.000000] BRK [0x33f358000, 0x33f358fff] PGTABLE
[ 0.000000] BRK [0x33f359000, 0x33f359fff] PGTABLE
[ 0.000000] BRK [0x33f35a000, 0x33f35afff] PGTABLE
[ 0.000000] BRK [0x33f35b000, 0x33f35bfff] PGTABLE
[ 0.000000] BRK [0x33f35c000, 0x33f35cfff] PGTABLE
[ 0.000000] BRK [0x33f35d000, 0x33f35dfff] PGTABLE
[ 0.000000] BRK [0x33f35e000, 0x33f35efff] PGTABLE
[ 0.000000] BRK [0x33f35f000, 0x33f35ffff] PGTABLE
[ 0.000000] BRK [0x33f360000, 0x33f360fff] PGTABLE
[ 0.000000] BRK [0x33f361000, 0x33f361fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x3544d000-0x36a1dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000B775A000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000B775A0A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000B7784398 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000B775A210 02A184 (v02 ALASKA A M I 01072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x00000000C66EFC40 000040
[ 0.000000] ACPI: APIC 0x00000000B77844B0 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000B7784570 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: BGRT 0x00000000B778FCF0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000B7784610 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000B7784650 000390 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: FIDT 0x00000000B77849E0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000B7784A80 003041 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x00000000B7787AC8 002544 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x00000000B778A010 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000B778A048 000024 (v02 INTEL OEM_RTD3 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x00000000B778A070 000E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x00000000B778AEB0 000B19 (v02 INTEL xh_rvp08 00000000 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x00000000B778B9D0 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000B778BA18 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x00000000B778C8F8 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: WSMT 0x00000000B778C990 000028 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000B778C9B8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x00000000B778CC58 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x00000000B778FC60 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x00000000B778FC98 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000836ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x836ffa000-0x836ffefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000836ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b7759fff]
[ 0.000000] node 0: [mem 0x00000000b7790000-0x00000000b7b38fff]
[ 0.000000] node 0: [mem 0x00000000b7b3b000-0x00000000c47aafff]
[ 0.000000] node 0: [mem 0x00000000c5f0c000-0x00000000c60c7fff]
[ 0.000000] node 0: [mem 0x00000000c7aa2000-0x00000000c7afffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000836ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000836ffffff]
[ 0.000000] On node 0 totalpages: 8370474
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 27 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12519 pages used for memmap
[ 0.000000] DMA32 zone: 801165 pages, LIFO batch:31
[ 0.000000] Normal zone: 118208 pages used for memmap
[ 0.000000] Normal zone: 7565312 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb775a000-0xb778ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7b39000-0xb7b39fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7b3a000-0xb7b3afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc47ab000-0xc5ee3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc5ee4000-0xc5f0bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc60c8000-0xc66effff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc66f0000-0xc7a2dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7a2e000-0xc7aa1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7b00000-0xc7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc8000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff9729b6c00000 s115288 r8192 d32168 u262144
[ 0.000000] pcpu-alloc: s115288 r8192 d32168 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8239656
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-2-amd64 root=UUID=524c1fcd-5b65-49e4-8ab3-9a69ef338f7d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32641000K/33481896K available (6907K kernel code, 1139K rwdata, 3036K rodata, 1484K init, 696K bss, 840896K reserved, 0K cma-reserved)
[ 0.000000] ftrace: allocating 28989 entries in 114 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 33024, nr_irqs: 2048, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] tsc: Detected 3600.000 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.00 BogoMIPS (lpj=14400000)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170728
[ 0.030706] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.032037] Security Framework initialized
[ 0.032038] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.032049] AppArmor: AppArmor initialized
[ 0.034858] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.036244] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.036289] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.036335] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.036457] CPU: Physical Processor ID: 0
[ 0.036458] CPU: Processor Core ID: 0
[ 0.036462] mce: CPU supports 10 MCE banks
[ 0.036469] CPU0: Thermal monitoring enabled (TM1)
[ 0.036482] process: using mwait in idle threads
[ 0.036484] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.036484] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.037178] Freeing SMP alternatives memory: 28K
[ 0.047259] smpboot: Max logical packages: 2
[ 0.048477] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.052616] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.092329] TSC deadline timer enabled
[ 0.092334] smpboot: CPU0: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[ 0.092371] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.092391] ... version: 4
[ 0.092391] ... bit width: 48
[ 0.092391] ... generic registers: 4
[ 0.092392] ... value mask: 0000ffffffffffff
[ 0.092392] ... max period: 00007fffffffffff
[ 0.092392] ... fixed-purpose events: 3
[ 0.092393] ... event mask: 000000070000000f
[ 0.092418] Hierarchical SRCU implementation.
[ 0.092769] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.092777] smp: Bringing up secondary CPUs ...
[ 0.092823] x86: Booting SMP configuration:
[ 0.092823] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.101286] smp: Brought up 1 node, 8 CPUs
[ 0.101286] smpboot: Total of 8 processors activated (57600.00 BogoMIPS)
[ 0.104520] devtmpfs: initialized
[ 0.104520] x86/mm: Memory block size: 128MB
[ 0.105518] PM: Registering ACPI NVS region [mem 0xb7b39000-0xb7b39fff] (4096 bytes)
[ 0.105518] PM: Registering ACPI NVS region [mem 0xc60c8000-0xc66effff] (6455296 bytes)
[ 0.105518] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.105518] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.105518] pinctrl core: initialized pinctrl subsystem
[ 0.105518] NET: Registered protocol family 16
[ 0.105518] cpuidle: using governor ladder
[ 0.105518] cpuidle: using governor menu
[ 0.105518] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.105518] ACPI: bus type PCI registered
[ 0.105518] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.105518] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.105518] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.105518] PCI: Using configuration type 1 for base access
[ 0.105518] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.105518] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.105518] ACPI: Added _OSI(Module Device)
[ 0.105518] ACPI: Added _OSI(Processor Device)
[ 0.105518] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.105518] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.108206] ACPI: Executed 36 blocks of module-level executable AML code
[ 0.114616] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.118689] ACPI: Dynamic OEM Table Load:
[ 0.118689] ACPI: SSDT 0xFFFF97299295E800 000759 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.118689] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.118689] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.118689] ACPI: Dynamic OEM Table Load:
[ 0.118689] ACPI: SSDT 0xFFFF972992541400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.118689] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.120221] ACPI: Dynamic OEM Table Load:
[ 0.120225] ACPI: SSDT 0xFFFF9729929EE000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.120478] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.120485] ACPI: Dynamic OEM Table Load:
[ 0.120485] ACPI: SSDT 0xFFFF972992A3C000 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.120485] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.121982] ACPI: EC: EC started
[ 0.121983] ACPI: EC: interrupt blocked
[ 0.121993] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.121994] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.121995] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.121995] ACPI: Interpreter enabled
[ 0.122025] ACPI: (supports S0 S3 S4 S5)
[ 0.122025] ACPI: Using IOAPIC for interrupt routing
[ 0.122052] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.122052] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.122326] ACPI: Power Resource [PG00] (on)
[ 0.122567] ACPI: Power Resource [PG01] (on)
[ 0.122797] ACPI: Power Resource [PG02] (on)
[ 0.124825] ACPI: Power Resource [WRST] (on)
[ 0.125103] ACPI: Power Resource [WRST] (on)
[ 0.125382] ACPI: Power Resource [WRST] (on)
[ 0.125657] ACPI: Power Resource [WRST] (on)
[ 0.125935] ACPI: Power Resource [WRST] (on)
[ 0.126211] ACPI: Power Resource [WRST] (on)
[ 0.126487] ACPI: Power Resource [WRST] (on)
[ 0.126768] ACPI: Power Resource [WRST] (on)
[ 0.127044] ACPI: Power Resource [WRST] (on)
[ 0.127320] ACPI: Power Resource [WRST] (on)
[ 0.127594] ACPI: Power Resource [WRST] (on)
[ 0.127871] ACPI: Power Resource [WRST] (on)
[ 0.128149] ACPI: Power Resource [WRST] (on)
[ 0.128425] ACPI: Power Resource [WRST] (on)
[ 0.128701] ACPI: Power Resource [WRST] (on)
[ 0.128982] ACPI: Power Resource [WRST] (on)
[ 0.129259] ACPI: Power Resource [WRST] (on)
[ 0.130362] ACPI: Power Resource [WRST] (on)
[ 0.130638] ACPI: Power Resource [WRST] (on)
[ 0.130913] ACPI: Power Resource [WRST] (on)
[ 0.145665] ACPI: Power Resource [FN00] (off)
[ 0.145724] ACPI: Power Resource [FN01] (off)
[ 0.145780] ACPI: Power Resource [FN02] (off)
[ 0.145835] ACPI: Power Resource [FN03] (off)
[ 0.145889] ACPI: Power Resource [FN04] (off)
[ 0.146955] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.146959] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.146984] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.147699] PCI host bridge to bus 0000:00
[ 0.147700] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.147701] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.147702] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.147702] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xf7ffffff window]
[ 0.147703] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.147704] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.147709] pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
[ 0.147952] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.147980] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.148174] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
[ 0.148191] pci 0000:00:14.0: reg 0x10: [mem 0xf7230000-0xf723ffff 64bit]
[ 0.148244] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.148405] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
[ 0.148426] pci 0000:00:16.0: reg 0x10: [mem 0xf724d000-0xf724dfff 64bit]
[ 0.148485] pci 0000:00:16.0: PME# supported from D3hot
[ 0.148602] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
[ 0.148615] pci 0000:00:17.0: reg 0x10: [mem 0xf7248000-0xf7249fff]
[ 0.148620] pci 0000:00:17.0: reg 0x14: [mem 0xf724c000-0xf724c0ff]
[ 0.148626] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.148631] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.148637] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.148642] pci 0000:00:17.0: reg 0x24: [mem 0xf724b000-0xf724b7ff]
[ 0.148673] pci 0000:00:17.0: PME# supported from D3hot
[ 0.148776] pci 0000:00:1b.0: [8086:a2e9] type 01 class 0x060400
[ 0.148828] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.148963] pci 0000:00:1c.0: [8086:a292] type 01 class 0x060400
[ 0.149014] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.149146] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
[ 0.149189] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.149298] pci 0000:00:1d.2: [8086:a29a] type 01 class 0x060400
paolo1612
 
Posts: 2
Joined: 2017-12-29 17:55
Location: Torino

boot messages - 2nd part

Postby paolo1612 » 2017-12-29 18:32

......2nd part (I can't attach a single file, sorry...don't know how to send attachments!)
thank u
paolo
------------
[ 0.149345] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[ 0.149476] pci 0000:00:1f.0: [8086:a2c4] type 00 class 0x060100
[ 0.149663] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
[ 0.149674] pci 0000:00:1f.2: reg 0x10: [mem 0xf7244000-0xf7247fff]
[ 0.149800] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
[ 0.149821] pci 0000:00:1f.3: reg 0x10: [mem 0xf7240000-0xf7243fff 64bit]
[ 0.149843] pci 0000:00:1f.3: reg 0x20: [mem 0xf7220000-0xf722ffff 64bit]
[ 0.149882] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.150026] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
[ 0.150085] pci 0000:00:1f.4: reg 0x10: [mem 0xf724a000-0xf724a0ff 64bit]
[ 0.150154] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.150324] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[ 0.150347] pci 0000:00:1f.6: reg 0x10: [mem 0xf7200000-0xf721ffff]
[ 0.150442] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.150564] pci 0000:01:00.0: [10de:1d01] type 00 class 0x030000
[ 0.150581] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.150589] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.150598] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.150603] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.150609] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.150620] pci 0000:01:00.0: BAR 3: assigned to efifb
[ 0.150695] pci 0000:01:00.1: [10de:0fb8] type 00 class 0x040300
[ 0.150708] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.160014] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.160015] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.160016] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.160018] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.160062] acpiphp: Slot [1] registered
[ 0.160070] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ 0.160114] acpiphp: Slot [1-1] registered
[ 0.160117] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.160156] acpiphp: Slot [1-2] registered
[ 0.160158] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 0.160206] pci 0000:05:00.0: [1b21:1242] type 00 class 0x0c0330
[ 0.160233] pci 0000:05:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
[ 0.160278] pci 0000:05:00.0: enabling Extended Tags
[ 0.160338] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 0.160428] pci 0000:00:1d.2: PCI bridge to [bus 05]
[ 0.160431] pci 0000:00:1d.2: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.162003] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162040] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.162076] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162111] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162147] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162182] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162218] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162253] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162629] ACPI: EC: interrupt unblocked
[ 0.162641] ACPI: EC: event unblocked
[ 0.162651] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.162652] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.162690] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.162690] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.162690] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.162690] vgaarb: loaded
[ 0.162690] EDAC MC: Ver: 3.0.0
[ 0.162690] Registered efivars operations
[ 0.193271] PCI: Using ACPI for IRQ routing
[ 0.199722] PCI: pci_cache_line_size set to 64 bytes
[ 0.199765] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.199766] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.199766] e820: reserve RAM buffer [mem 0xb775a000-0xb7ffffff]
[ 0.199767] e820: reserve RAM buffer [mem 0xb7b39000-0xb7ffffff]
[ 0.199767] e820: reserve RAM buffer [mem 0xc47ab000-0xc7ffffff]
[ 0.199768] e820: reserve RAM buffer [mem 0xc60c8000-0xc7ffffff]
[ 0.199769] e820: reserve RAM buffer [mem 0xc7b00000-0xc7ffffff]
[ 0.199769] e820: reserve RAM buffer [mem 0x837000000-0x837ffffff]
[ 0.199826] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.199826] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.201023] clocksource: Switched to clocksource hpet
[ 0.205541] VFS: Disk quotas dquot_6.6.0
[ 0.205552] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.205609] AppArmor: AppArmor Filesystem Enabled
[ 0.205617] pnp: PnP ACPI init
[ 0.205764] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.205766] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.205998] pnp 00:01: [dma 0 disabled]
[ 0.206022] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.206178] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.206179] system 00:02: [io 0xffff] has been reserved
[ 0.206179] system 00:02: [io 0xffff] has been reserved
[ 0.206180] system 00:02: [io 0xffff] has been reserved
[ 0.206181] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.206182] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.206183] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.206244] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.206246] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.206258] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.206278] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.206279] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.206427] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.206428] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.206428] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.206429] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.206430] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.206431] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.206431] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.206432] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.206433] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.206434] system 00:06: [mem 0xf7fe0000-0xf7ffffff] has been reserved
[ 0.206435] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.206461] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.206462] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.206462] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.206463] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.206464] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.206465] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.206465] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.206466] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.206467] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.206468] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.206469] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.206681] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.206682] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.207499] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.207500] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.207501] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.207502] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.208145] pnp: PnP ACPI: found 10 devices
[ 0.215191] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.215202] pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.215204] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.215205] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.215211] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.215211] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.215212] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[ 0.215216] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.215217] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.215218] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ 0.215226] pci 0000:00:1b.0: BAR 14: assigned [mem 0xc8000000-0xc81fffff]
[ 0.215228] pci 0000:00:1b.0: BAR 15: assigned [mem 0xc8200000-0xc83fffff 64bit pref]
[ 0.215229] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc8400000-0xc85fffff]
[ 0.215231] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc8600000-0xc87fffff 64bit pref]
[ 0.215232] pci 0000:00:1d.0: BAR 14: assigned [mem 0xc8800000-0xc89fffff]
[ 0.215233] pci 0000:00:1d.0: BAR 15: assigned [mem 0xc8a00000-0xc8bfffff 64bit pref]
[ 0.215234] pci 0000:00:1b.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.215235] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.215236] pci 0000:00:1d.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.215238] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.215239] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.215240] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.215242] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.215244] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ 0.215246] pci 0000:00:1b.0: bridge window [io 0x2000-0x2fff]
[ 0.215249] pci 0000:00:1b.0: bridge window [mem 0xc8000000-0xc81fffff]
[ 0.215250] pci 0000:00:1b.0: bridge window [mem 0xc8200000-0xc83fffff 64bit pref]
[ 0.215254] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.215256] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.215259] pci 0000:00:1c.0: bridge window [mem 0xc8400000-0xc85fffff]
[ 0.215261] pci 0000:00:1c.0: bridge window [mem 0xc8600000-0xc87fffff 64bit pref]
[ 0.215264] pci 0000:00:1d.0: PCI bridge to [bus 04]
[ 0.215265] pci 0000:00:1d.0: bridge window [io 0x4000-0x4fff]
[ 0.215267] pci 0000:00:1d.0: bridge window [mem 0xc8800000-0xc89fffff]
[ 0.215269] pci 0000:00:1d.0: bridge window [mem 0xc8a00000-0xc8bfffff 64bit pref]
[ 0.215271] pci 0000:00:1d.2: PCI bridge to [bus 05]
[ 0.215274] pci 0000:00:1d.2: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.215278] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.215279] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.215279] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.215280] pci_bus 0000:00: resource 7 [mem 0xc8000000-0xf7ffffff window]
[ 0.215280] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.215281] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.215282] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.215282] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.215283] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.215283] pci_bus 0000:02: resource 1 [mem 0xc8000000-0xc81fffff]
[ 0.215284] pci_bus 0000:02: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref]
[ 0.215285] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.215285] pci_bus 0000:03: resource 1 [mem 0xc8400000-0xc85fffff]
[ 0.215286] pci_bus 0000:03: resource 2 [mem 0xc8600000-0xc87fffff 64bit pref]
[ 0.215286] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.215287] pci_bus 0000:04: resource 1 [mem 0xc8800000-0xc89fffff]
[ 0.215287] pci_bus 0000:04: resource 2 [mem 0xc8a00000-0xc8bfffff 64bit pref]
[ 0.215288] pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.215389] NET: Registered protocol family 2
[ 0.215505] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.215700] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.215774] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.215799] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.215848] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.215910] NET: Registered protocol family 1
[ 0.216499] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.216632] PCI: CLS 64 bytes, default 64
[ 0.216652] Unpacking initramfs...
[ 0.468384] Freeing initrd memory: 22340K
[ 0.468394] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.468396] software IO TLB [mem 0xb375a000-0xb775a000] (64MB) mapped at [ffff97223375a000-ffff972237759fff]
[ 0.468413] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
[ 0.468792] audit: initializing netlink subsys (disabled)
[ 0.468874] audit: type=2000 audit(1514572666.468:1): state=initialized audit_enabled=0 res=1
[ 0.469093] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 0.469257] zbud: loaded
[ 0.651699] Key type asymmetric registered
[ 0.651700] Asymmetric key parser 'x509' registered
[ 0.651712] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.651767] io scheduler noop registered
[ 0.651767] io scheduler deadline registered
[ 0.651776] io scheduler cfq registered (default)
[ 0.651776] io scheduler mq-deadline registered
[ 0.652417] efifb: probing for efifb
[ 0.652424] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
[ 0.652425] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.652425] efifb: scrolling: redraw
[ 0.652426] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.656677] Console: switching to colour frame buffer device 128x48
[ 0.660853] fb0: EFI VGA frame buffer device
[ 0.660858] intel_idle: MWAIT substates: 0x142120
[ 0.660859] intel_idle: v0.4.1 model 0x9E
[ 0.661143] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.661380] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.682196] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.682599] Linux agpgart interface v0.103
[ 0.682628] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.682629] AMD IOMMUv2 functionality not available on this system
[ 0.683147] i8042: PNP: No PS/2 controller found.
[ 0.683147] i8042: Probing ports directly.
[ 0.686532] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.686535] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.686709] mousedev: PS/2 mouse device common for all mice
[ 0.686745] rtc_cmos 00:04: RTC can wake from S4
[ 0.687157] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.687236] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.687243] intel_pstate: Intel P-state driver initializing
[ 0.687253] intel_pstate: Disabling energy efficiency optimization
[ 0.688063] intel_pstate: HWP enabled
[ 0.688424] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.688728] NET: Registered protocol family 10
[ 0.688929] Segment Routing with IPv6
[ 0.688936] mip6: Mobile IPv6
[ 0.688937] NET: Registered protocol family 17
[ 0.688938] mpls_gso: MPLS GSO support
[ 0.689569] microcode: sig=0x906e9, pf=0x2, revision=0x5e
[ 0.689915] microcode: Microcode Update Driver: v2.2.
[ 0.689921] sched_clock: Marking stable (689913770, 0)->(716391571, -26477801)
[ 0.690221] registered taskstats version 1
[ 0.690230] zswap: loaded using pool lzo/zbud
[ 0.690352] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.690353] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.691116] rtc_cmos 00:04: setting system clock to 2017-12-29 18:37:47 UTC (1514572667)
[ 0.692054] Freeing unused kernel memory: 1484K
[ 0.692054] Write protecting the kernel read-only data: 12288k
[ 0.692401] Freeing unused kernel memory: 1260K
[ 0.693470] Freeing unused kernel memory: 1060K
[ 0.696797] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.730033] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.742130] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.742159] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.742159] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.742241] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.742241] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.743868] ACPI: bus type USB registered
[ 0.743878] usbcore: registered new interface driver usbfs
[ 0.743882] usbcore: registered new interface driver hub
[ 0.743898] usbcore: registered new device driver usb
[ 0.744254] SCSI subsystem initialized
[ 0.744860] pps_core: LinuxPPS API ver. 1 registered
[ 0.744861] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.744894] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 0.744939] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 0.745236] libata version 3.00 loaded.
[ 0.745313] PTP clock support registered
[ 0.745943] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.745943] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.746606] ahci 0000:00:17.0: version 3.0
[ 0.746921] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.746923] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 0.749309] AVX2 version of gcm_enc/dec engaged.
[ 0.749310] AES CTR mode by8 optimization enabled
[ 0.807442] scsi host0: ahci
[ 0.807699] scsi host1: ahci
[ 0.807931] scsi host2: ahci
[ 0.808421] scsi host3: ahci
[ 0.809002] scsi host4: ahci
[ 0.809418] scsi host5: ahci
[ 0.809548] ata1: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b100 irq 120
[ 0.809552] ata2: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b180 irq 120
[ 0.809554] ata3: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b200 irq 120
[ 0.809557] ata4: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b280 irq 120
[ 0.809561] ata5: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b300 irq 120
[ 0.809565] ata6: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b380 irq 120
[ 0.810005] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.810019] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.811171] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.811179] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.811669] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.811673] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.811677] usb usb1: Product: xHCI Host Controller
[ 0.811679] usb usb1: Manufacturer: Linux 4.14.0-2-amd64 xhci-hcd
[ 0.811682] usb usb1: SerialNumber: 0000:00:14.0
[ 0.812009] hub 1-0:1.0: USB hub found
[ 0.812074] hub 1-0:1.0: 16 ports detected
[ 0.818221] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.818229] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.818304] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.818307] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.818309] usb usb2: Product: xHCI Host Controller
[ 0.818312] usb usb2: Manufacturer: Linux 4.14.0-2-amd64 xhci-hcd
[ 0.818314] usb usb2: SerialNumber: 0000:00:14.0
[ 0.818571] hub 2-0:1.0: USB hub found
[ 0.818590] hub 2-0:1.0: 8 ports detected
[ 0.819221] usb: port power management may be unreliable
[ 0.821660] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.821673] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[ 0.821809] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.880482] xhci_hcd 0000:05:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
[ 0.880595] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.880596] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880597] usb usb3: Product: xHCI Host Controller
[ 0.880597] usb usb3: Manufacturer: Linux 4.14.0-2-amd64 xhci-hcd
[ 0.880598] usb usb3: SerialNumber: 0000:05:00.0
[ 0.880689] hub 3-0:1.0: USB hub found
[ 0.880698] hub 3-0:1.0: 2 ports detected
[ 0.880745] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.880747] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[ 0.880748] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.880768] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.880777] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.880777] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880778] usb usb4: Product: xHCI Host Controller
[ 0.880778] usb usb4: Manufacturer: Linux 4.14.0-2-amd64 xhci-hcd
[ 0.880778] usb usb4: SerialNumber: 0000:05:00.0
[ 0.880863] hub 4-0:1.0: USB hub found
[ 0.880867] hub 4-0:1.0: 2 ports detected
[ 1.089259] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.123677] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.123707] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.123860] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.123897] ata6: SATA link down (SStatus 4 SControl 300)
[ 1.123935] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.123969] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.124112] ata2.00: supports DRM functions and may not be fully accessible
[ 1.124402] ata3.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 1.124406] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.124967] ata2.00: ATA-10: Crucial_CT525MX300SSD1, M0CR040, max UDMA/133
[ 1.124971] ata2.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.125146] ata3.00: configured for UDMA/133
[ 1.127253] ata2.00: supports DRM functions and may not be fully accessible
[ 1.127973] ata1.00: ATA-9: WDC WDS100T1B0A-00H9H0, X41100WD, max UDMA/133
[ 1.127977] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.130207] ata1.00: configured for UDMA/133
[ 1.130232] ata2.00: configured for UDMA/133
[ 1.130708] scsi 0:0:0:0: Direct-Access ATA WDC WDS100T1B0A- 00WD PQ: 0 ANSI: 5
[ 1.131878] scsi 1:0:0:0: Direct-Access ATA Crucial_CT525MX3 R040 PQ: 0 ANSI: 5
[ 1.133015] scsi 2:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 1.138176] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.138199] sd 0:0:0:0: [sda] Write Protect is off
[ 1.138204] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.138240] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.138279] ata2.00: Enabling discard_zeroes_data
[ 1.138520] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.138525] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.138565] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.138570] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.138598] sd 1:0:0:0: [sdb] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
[ 1.138642] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.138646] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.138652] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.138706] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.139049] ata2.00: Enabling discard_zeroes_data
[ 1.139899] sdb: sdb1 sdb2
[ 1.140049] sda: sda1 sda2 sda3 sda4
[ 1.140383] ata2.00: Enabling discard_zeroes_data
[ 1.140822] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.141383] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.157634] sdc: sdc1
[ 1.159206] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.160192] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 1.175390] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 2c:4d:54:ea:34:f4
[ 1.175394] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.175502] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.178225] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 1.311360] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
[ 1.311365] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.311368] usb 1-1: Product: USB Receiver
[ 1.311370] usb 1-1: Manufacturer: Logitech
[ 1.321950] usbcore: registered new interface driver usbhid
[ 1.321952] usbhid: USB HID core driver
[ 1.324512] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
[ 1.440045] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[ 1.455806] input: Logitech M705 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input3
[ 1.455850] logitech-hidpp-device 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-1:1
[ 1.461916] input: Logitech MK700 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:2008.0005/input/input4
[ 1.462052] logitech-hidpp-device 0003:046D:2008.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech MK700] on usb-0000:00:14.0-1:2
[ 1.472287] clocksource: Switched to clocksource tsc
[ 1.484523] PM: Starting manual resume from disk
[ 1.484755] PM: Image not found (code -22)
[ 1.617826] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.725569] usb 1-7: New USB device found, idVendor=046d, idProduct=0804
[ 1.725573] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 1.725576] usb 1-7: SerialNumber: 690BA270
[ 1.747486] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.834201] systemd[1]: systemd 236 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 1.834299] systemd[1]: Detected architecture x86-64.
[ 1.834436] systemd[1]: Set hostname to <debian>.
[ 1.872470] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 1.872471] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 1.903558] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.903573] systemd[1]: Reached target User and Group Name Lookups.
[ 1.903649] systemd[1]: Created slice System Slice.
[ 1.903907] systemd[1]: Mounting Kernel Debug File System...
[ 1.903996] systemd[1]: Created slice system-getty.slice.
[ 1.919537] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 1.922435] lp: driver loaded but no devices found
[ 1.923968] ppdev: user-space parallel port driver
[ 1.956893] systemd-journald[299]: Received request to flush runtime journal from PID 1
[ 1.984485] nvidia: loading out-of-tree module taints kernel.
[ 1.984503] nvidia: module license 'NVIDIA' taints kernel.
[ 1.984505] Disabling lock debugging due to kernel taint
[ 2.008846] nvidia-nvlink: Nvlink Core is being initialized, major device number 245
[ 2.009362] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.009512] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.98 Thu Oct 26 15:16:01 PDT 2017 (using threaded interrupts)
[ 2.015559] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.98 Thu Oct 26 14:41:13 PDT 2017
[ 2.026795] device-mapper: uevent: version 1.0.3
[ 2.026849] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 2.034283] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 2.034285] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 2.052441] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 2.052447] ACPI: Sleep Button [SLPB]
[ 2.052470] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 2.052474] ACPI: Power Button [PWRB]
[ 2.052493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 2.052567] ACPI: Power Button [PWRF]
[ 2.075086] Bluetooth: Core ver 2.22
[ 2.075095] NET: Registered protocol family 31
[ 2.075095] Bluetooth: HCI device and connection manager initialized
[ 2.075097] Bluetooth: HCI socket layer initialized
[ 2.075099] Bluetooth: L2CAP socket layer initialized
[ 2.075102] Bluetooth: SCO socket layer initialized
[ 2.075821] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 2.075918] EFI Variables Facility v0.08 2004-May-17
[ 2.107883] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.107973] iTCO_vendor_support: vendor-support=0
[ 2.108245] Bluetooth: HCI UART driver ver 2.3
[ 2.108246] Bluetooth: HCI UART protocol H4 registered
[ 2.108247] Bluetooth: HCI UART protocol BCSP registered
[ 2.108247] Bluetooth: HCI UART protocol ATH3K registered
[ 2.108248] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 2.108269] Bluetooth: HCI UART protocol Intel registered
[ 2.108270] Bluetooth: HCI UART protocol QCA registered
[ 2.108270] Bluetooth: HCI UART protocol AG6XX registered
[ 2.108271] Bluetooth: HCI UART protocol Marvell registered
[ 2.108368] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.108489] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 2.108580] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.108646] pstore: using zlib compression
[ 2.108652] pstore: Registered efi as persistent store backend
[ 2.108721] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.109356] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.109357] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.109357] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.109358] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.109358] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.109359] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.139266] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.140528] media: Linux media interface: v0.10
[ 2.140548] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.140575] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.143603] Linux video capture interface: v2.00
[ 2.150977] asus_wmi: ASUS WMI generic driver loaded
[ 2.157109] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.157446] asus_wmi: Initialization: 0x0
[ 2.157473] asus_wmi: BIOS WMI version: 0.9
[ 2.158219] asus_wmi: SFUN value: 0x0
[ 2.158237] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 2.158241] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 2.158310] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0804)
[ 2.158458] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[ 2.158971] asus_wmi: Number of fans: 1
[ 2.167810] kvm: disabled by bios
[ 2.169536] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 2.169538] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.169539] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.169540] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.169541] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 2.169541] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.169543] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 2.169544] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 2.169544] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 2.172989] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
[ 2.172990] uvcvideo 1-7:1.0: Entity type for entity Extension 8 was not initialized!
[ 2.172991] uvcvideo 1-7:1.0: Entity type for entity Extension 10 was not initialized!
[ 2.172992] uvcvideo 1-7:1.0: Entity type for entity Extension 12 was not initialized!
[ 2.172992] uvcvideo 1-7:1.0: Entity type for entity Extension 11 was not initialized!
[ 2.172993] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
[ 2.172993] uvcvideo 1-7:1.0: Entity type for entity Extension 13 was not initialized!
[ 2.172994] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[ 2.172994] uvcvideo 1-7:1.0: Entity type for entity Extension 14 was not initialized!
[ 2.173043] input: UVC Camera (046d:0804) as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input10
[ 2.173077] usbcore: registered new interface driver uvcvideo
[ 2.173077] USB Video Class driver (1.1.1)
[ 2.180325] random: crng init done
[ 2.181215] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 2.181262] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 2.181314] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 2.181357] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 2.181390] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 2.181429] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 2.181461] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 2.181772] intel_rapl: Found RAPL domain package
[ 2.181773] intel_rapl: Found RAPL domain core
[ 2.181774] intel_rapl: Found RAPL domain dram
[ 2.193343] Adding 33481724k swap on /dev/sda3. Priority:-2 extents:1 across:33481724k SSFS
[ 2.249308] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.294319] audit: type=1400 audit(1514572669.097:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=580 comm="apparmor_parser"
[ 2.294326] audit: type=1400 audit(1514572669.097:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=582 comm="apparmor_parser"
[ 2.294338] audit: type=1400 audit(1514572669.097:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=579 comm="apparmor_parser"
[ 2.294875] audit: type=1400 audit(1514572669.097:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=578 comm="apparmor_parser"
[ 2.294876] audit: type=1400 audit(1514572669.097:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man//filter" pid=578 comm="apparmor_parser"
[ 2.294877] audit: type=1400 audit(1514572669.097:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man//groff" pid=578 comm="apparmor_parser"
[ 2.295493] audit: type=1400 audit(1514572669.097:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=583 comm="apparmor_parser"
[ 2.295738] audit: type=1400 audit(1514572669.097:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=585 comm="apparmor_parser"
[ 2.295739] audit: type=1400 audit(1514572669.097:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=585 comm="apparmor_parser"
[ 2.435364] usb 1-7: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[ 2.435369] usb 1-7: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
[ 2.435681] usbcore: registered new interface driver snd-usb-audio
[ 2.904849] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 2.904978] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 3.659421] input: lircd-uinput as /devices/virtual/input/input20
[ 4.054821] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 4.268204] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 4.571985] resource sanity check: requesting [mem 0x000a0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000a0000-0x000bffff window]
[ 4.572105] caller os_map_kernel_space.part.2+0x6d/0x80 [nvidia] mapping multiple BARs
[ 4.840396] NVRM: Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported.
[ 4.840994] nvidia-modeset: Allocated GPU:0 (GPU-2840f4f7-55ca-5283-3e44-38f5acc7612d) @ PCI:0000:01:00.0
[ 6.543557] kauditd_printk_skb: 5 callbacks suppressed
[ 6.543558] audit: type=1400 audit(1514572673.345:16): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/etc/mysql/mariadb.conf.d/" pid=2057 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 6.948210] usb 1-7: reset high-speed USB device number 3 using xhci_hcd
[ 7.777237] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
[ 7.777241] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 7.777315] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 13.815900] logitech-hidpp-device 0003:046D:2008.0005: HID++ 3.0 device connected.
[ 13.859870] logitech-hidpp-device 0003:046D:2008.0005: unable to retrieve the name of the device
[ 45.909801] logitech-hidpp-device 0003:046D:101B.0004: HID++ 1.0 device connected.
paolo1612
 
Posts: 2
Joined: 2017-12-29 17:55
Location: Torino

Re: boot messages

Postby steve_v » 2017-12-29 18:51

For the love of Dog, use a pastebin. And some forum etiquette wouldn't hurt either.
steve_v
 
Posts: 688
Joined: 2012-10-06 05:31
Location: New Zealand

Re: boot messages

Postby stevepusser » 2017-12-29 21:13

What's the question again? Are you saying that you're seeing the dmesg output at boot? Do you have "quiet" in your boot command line?
The MX Linux repositories: Backports galore! If we don't have something, just ask and we'll try--we like challenges. New packages: GIMP 2.102, Pale Moon 27.9.2, Enlightenment 0.22, Calligra 3.1, VLC 3.0.2, Firefox 60.0.1, Krita 4.0.3
User avatar
stevepusser
 
Posts: 9553
Joined: 2009-10-06 05:53

Re: boot messages

Postby Wheelerof4te » 2017-12-29 22:25

Please, reinstall Debian and use Testing instead if you want or need newer packages. There is really no need to use Sid, especially if you can't troubleshoot problems yourself.
Why Debian isn't user-friendly?
HOWTO: Install ES3 Morrowind on Debian Sid and Stable
"My computer is a few electrical transistors I flip manually with registers made out of salt water and lemon juice in some cups." - some guy on Reddit
User avatar
Wheelerof4te
 
Posts: 893
Joined: 2015-08-30 20:14


Return to System configuration

Who is online

Users browsing this forum: No registered users and 4 guests

fashionable