Installing Netis WF2113 onto Debian Jessie

Kernels & Hardware, configuring network, installing services

Installing Netis WF2113 onto Debian Jessie

Postby frakn » 2018-09-11 01:13

Hi - I'm having some trouble getting wifi to work on my machine. When I run `lspci` it looks like I have a kernel driver already in use for the device, but I don't see any wlan devices when I run `iwconfig`. Attached `wireless-info.txt` output.

Code: Select all
########## wireless info START ##########

Report from: 10 Sep 2018 17:47 EDT -0400

Booted last: 10 Sep 2018 17:28 EDT -0400

Script from: 10 Jan 2018 20:04 UTC +0000

##### release ###########################

Distributor ID:   Debian
Description:   Debian GNU/Linux 8.9 (jessie)
Release:   8.9
Codename:   jessie

##### kernel ############################

Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.43-2+deb8u3 (2017-08-15) x86_64 unknown unknown GNU/Linux

Parameters: ro, initrd=/install/initrd.gz, quiet

##### desktop ###########################

default

##### lspci #############################

00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I219-V [8086:15b8] (rev 31)
   Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7998]
   Kernel driver in use: e1000e

03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8192CE PCIe Wireless Network Adapter [10ec:8178] (rev 01)
   Subsystem: Realtek Semiconductor Co., Ltd. RTL8192CE PCIe Wireless Network Adapter [10ec:8178]
   Kernel driver in use: rtl8192ce

##### lsusb #############################

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 046d:c068 Logitech, Inc. G500 Laser Mouse
Bus 001 Device 004: ID 046d:081b Logitech, Inc. Webcam C310
Bus 001 Device 003: ID 0480:a006 Toshiba America Info. Systems, Inc.
Bus 001 Device 002: ID 1b1c:1b09 Corsair
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

##### PCMCIA card info ##################

'pccardctl' is not installed (package "pcmciautils").

##### rfkill ############################

./wireless-info: line 192: rfkill: command not found

##### lsmod #############################

rtl8192ce              52164  0
rtl_pci                25947  1 rtl8192ce
rtlwifi                54719  2 rtl_pci,rtl8192ce
rtl8192c_common        40162  1 rtl8192ce
mac80211              482315  3 rtl_pci,rtlwifi,rtl8192ce
cfg80211              413828  2 mac80211,rtlwifi
rfkill                 18867  4 cfg80211,bluetooth
mxm_wmi                12515  0
wmi                    17339  1 mxm_wmi

##### interfaces ########################

[/etc/network/interfaces]

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

##### ifconfig ##########################

docker0   Link encap:Ethernet  HWaddr <MAC 'docker0' [IF1]> 
          inet addr:172.17.0.1  Bcast:0.0.0.0  Mask:255.255.0.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth0      Link encap:Ethernet  HWaddr <MAC 'eth0' [IF2]> 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:16 Memory:df400000-df420000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:75 errors:0 dropped:0 overruns:0 frame:0
          TX packets:75 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:10681 (10.4 KiB)  TX bytes:10681 (10.4 KiB)

##### iwconfig ##########################

lo        no wireless extensions.

docker0   no wireless extensions.

eth0      no wireless extensions.

##### route #############################

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 docker0
172.17.0.0      0.0.0.0         255.255.0.0     U     0      0        0 docker0

##### resolv.conf #######################

nameserver 192.168.1.1
nameserver 8.8.8.8
nameserver 2001:4860:4860::8888

##### network managers ##################

Installed:

   NetworkManager

Running:

root       520     1  0 17:28 ?        00:00:00 /usr/sbin/NetworkManager --no-daemon

##### NetworkManager info ###############

GENERAL.DEVICE:                         docker0
GENERAL.TYPE:                           bridge
GENERAL.VENDOR:                         --
GENERAL.PRODUCT:                        --
GENERAL.DRIVER:                         bridge
GENERAL.DRIVER-VERSION:                 2.3
GENERAL.FIRMWARE-VERSION:               N/A
GENERAL.HWADDR:                         <MAC 'docker0' [IF1]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          100 (connected)
GENERAL.REASON:                         0 (No reason given)
GENERAL.UDI:                            /sys/devices/virtual/net/docker0
GENERAL.IP-IFACE:                       docker0
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.CONNECTION:                     docker0
GENERAL.CON-UUID:                       c4f4f709-0acd-456b-9aa6-200cda6f541e
GENERAL.CON-PATH:                       /org/freedesktop/NetworkManager/ActiveConnection/0
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                     unknown
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{1}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]:   c4f4f709-0acd-456b-9aa6-200cda6f541e | docker0
IP4.ADDRESS[1]:                         ip = 172.17.0.1/16, gw = 0.0.0.0
IP4.ROUTE[1]:                           dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000

GENERAL.DEVICE:                         eth0
GENERAL.TYPE:                           ethernet
GENERAL.VENDOR:                         Intel Corporation
GENERAL.PRODUCT:                        --
GENERAL.DRIVER:                         e1000e
GENERAL.DRIVER-VERSION:                 2.3.2-k
GENERAL.FIRMWARE-VERSION:               0.8-4
GENERAL.HWADDR:                         <MAC 'eth0' [IF2]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          20 (unavailable)
GENERAL.REASON:                         2 (Device is now managed)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1f.6/net/eth0
GENERAL.IP-IFACE:                       
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.CONNECTION:                     --
GENERAL.CON-UUID:                       --
GENERAL.CON-PATH:                       --
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                     unknown
CONNECTIONS.AVAILABLE-CONNECTION-PATHS:
WIRED-PROPERTIES.CARRIER:               off

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true

##### NetworkManager.conf ###############

[main]
plugins=ifupdown,keyfile

[ifupdown]
managed=false

##### NetworkManager profiles ###########

##### Netplan config ####################

##### iw reg get ########################

Region: America/New_York (based on set time zone)

country 00: DFS-UNSET
   (2402 - 2472 @ 40), (N/A, 20), (N/A)
   (2457 - 2482 @ 20), (N/A, 20), (N/A), NO-IR
   (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
   (5170 - 5250 @ 80), (N/A, 20), (N/A), NO-IR
   (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, NO-IR
   (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
   (5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
   (57240 - 63720 @ 2160), (N/A, 0), (N/A)

##### iwlist channels ###################

lo        no frequency information.

docker0   no frequency information.

eth0      no frequency information.

##### iwlist scan #######################

lo        Interface doesn't support scanning.

docker0   Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

##### module infos ######################

[rtl8192ce]
filename:       /lib/modules/3.16.0-4-amd64/kernel/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192ce.ko
firmware:       rtlwifi/rtl8192cfwU_B.bin
firmware:       rtlwifi/rtl8192cfwU.bin
firmware:       rtlwifi/rtl8192cfw.bin
description:    Realtek 8192C/8188C 802.11n PCI wireless
license:        GPL
author:         Larry Finger   <Larry.Finger@lwfinger.net>
author:         Realtek WlanFAE   <wlanfae@realtek.com>
author:         lizhaoming   <chaoming_li@realsil.com.cn>
depends:        rtlwifi,rtl_pci,rtl8192c-common,mac80211
intree:         Y
vermagic:       3.16.0-4-amd64 SMP mod_unload modversions
parm:           swenc:Set to 1 for software crypto (default 0)
 (bool)
parm:           ips:Set to 0 to not use link power save (default 1)
 (bool)
parm:           swlps:Set to 1 to use SW control power save (default 0)
 (bool)
parm:           fwlps:Set to 1 to use FW control power save (default 1)
 (bool)
parm:           debug:Set debug level (0-5) (default 0) (int)

[rtl_pci]
filename:       /lib/modules/3.16.0-4-amd64/kernel/drivers/net/wireless/rtlwifi/rtl_pci.ko
description:    PCI basic driver for rtlwifi
license:        GPL
author:         Larry Finger   <Larry.FInger@lwfinger.net>
author:         Realtek WlanFAE   <wlanfae@realtek.com>
author:         lizhaoming   <chaoming_li@realsil.com.cn>
depends:        mac80211,rtlwifi
intree:         Y
vermagic:       3.16.0-4-amd64 SMP mod_unload modversions

[rtlwifi]
filename:       /lib/modules/3.16.0-4-amd64/kernel/drivers/net/wireless/rtlwifi/rtlwifi.ko
description:    Realtek 802.11n PCI wireless core
license:        GPL
author:         Larry Finger   <Larry.FInger@lwfinger.net>
author:         Realtek WlanFAE   <wlanfae@realtek.com>
author:         lizhaoming   <chaoming_li@realsil.com.cn>
depends:        mac80211,cfg80211
intree:         Y
vermagic:       3.16.0-4-amd64 SMP mod_unload modversions

[rtl8192c_common]
filename:       /lib/modules/3.16.0-4-amd64/kernel/drivers/net/wireless/rtlwifi/rtl8192c/rtl8192c-common.ko
description:    Realtek 8192C/8188C 802.11n PCI wireless
license:        GPL
author:         Larry Finger   <Larry.Finger@lwfinger.net>
author:         Ziv Huang   <ziv_huang@realtek.com>
author:         Georgia      <georgia@realtek.com>
author:         Realtek WlanFAE   <wlanfae@realtek.com>
author:         lizhaoming   <chaoming_li@realsil.com.cn>
depends:       
intree:         Y
vermagic:       3.16.0-4-amd64 SMP mod_unload modversions

[mac80211]
filename:       /lib/modules/3.16.0-4-amd64/kernel/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
depends:        cfg80211
intree:         Y
vermagic:       3.16.0-4-amd64 SMP mod_unload modversions
parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[cfg80211]
filename:       /lib/modules/3.16.0-4-amd64/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:         Johannes Berg
depends:        rfkill
intree:         Y
vermagic:       3.16.0-4-amd64 SMP mod_unload modversions
parm:           bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

[rtl8192ce]
debug: 0
fwlps: Y
ips: Y
swenc: N
swlps: N

[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
probe_wait_ms: 500

[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

##### modprobe options ##################

[/etc/modprobe.d/modesetting.conf]
options cirrus modeset=1
options mgag200 modeset=1

[/etc/modprobe.d/open-vm-tools-dkms.conf]
install pcnet32 /sbin/modprobe -q --ignore-install vmxnet; /sbin/modprobe -q --ignore-install pcnet32 $CMDLINE_OPTS; /bin/true;

##### rc.local ##########################

exit 0

##### pm-utils ##########################

##### udev rules ########################

[/etc/udev/rules.d/70-persistent-net.rules]
# PCI device 0x8086:0x15b8 (e1000e)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth0' [IF2]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

##### dmesg #############################

[    2.205378] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.375369] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready

########## wireless info END ############

frakn
 
Posts: 1
Joined: 2018-09-11 01:02

Return to System configuration

Who is online

Users browsing this forum: No registered users and 3 guests

fashionable