[solved]Debian on Asus TUF FX705DY_FX705DY wlan and faustus

[hn3]

Hi bought an Asus TUF Gaming FX705DY_FX705DY for Debian only use.

I did not get buster witch the Xserver to run on this notebook.

So I used:
Debian GNU/Linux bullseye-DI-alpha2 "Bullseye" - Unofficial amd64
NETINST with firmware 20200315-11:07
The insallation worked with ethernet and dhcp so
After Installation it stoped with out the X server.
pressed alt + F3
loged in with the user than

Code: Select all

su
sudo apt install linux-image-amd64 firmware-linux firmware-linux-free firmware-linux-nonfree firmware-misc-nonfree
sudo shutdown -h now

X server is working now.
sound too.
But no wlan.

Code: Select all

sudo iw dev

gives nothing back.
To find the wlan chip I tried:

Code: Select all

 sudo lspci -vv 

in the output I find this:

Code: Select all

        03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8821CE 802.11ac PCIe Wireless Network Adapter
        Subsystem: AzureWave RTL8821CE 802.11ac PCIe Wireless Network Adapter
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 255
        Region 0: I/O ports at e000 [disabled] [size=256]
        Region 2: Memory at fe800000 (64-bit, non-prefetchable) [disabled] [size=64K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+, NROPrPrP-, LTR+
                         10BitTagComp-, 10BitTagReq-, OBFF Via message/WAKE#, ExtFmt-, EETLPPrefix-
                         EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
                         FRS-, TPHComp-, ExtTPHComp-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
                         AtomicOpsCtl: ReqEn-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [100 v2] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Capabilities: [148 v1] Device Serial Number 00-e0-4c-ff-fe-c8-21-01
        Capabilities: [158 v1] Latency Tolerance Reporting
                Max snoop latency: 0ns
                Max no snoop latency: 0ns
        Capabilities: [160 v1] L1 PM Substates
                L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
                          PortCommonModeRestoreTime=30us PortTPowerOnTime=60us
                L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
                           T_CommonMode=0us LTR1.2_Threshold=0ns
                L1SubCtl2: T_PwrOn=10us
        Capabilities: [170 v1] Precision Time Measurement
                PTMCap: Requester:- Responder:+ Root:-
                PTMClockGranularity: Unimplemented
                PTMControl: Enabled:- RootSelected:-
                PTMEffectiveGranularity: Unknown
        Capabilities: [17c v1] Vendor Specific Information: ID=0003 Rev=1 Len=054 <?>

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
        Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 34
        Region 0: I/O ports at d000 [size=256]
        Region 2: Memory at fe704000 (64-bit, non-prefetchable) [size=4K]
        Region 4: Memory at fe700000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v2) Endpoint, MSI 01
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 4096 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, NROPrPrP-, LTR+
                         10BitTagComp-, 10BitTagReq-, OBFF Via message/WAKE#, ExtFmt-, EETLPPrefix-
                         EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
                         FRS-, TPHComp-, ExtTPHComp-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
                         AtomicOpsCtl: ReqEn-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00000800
        Capabilities: [100 v2] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Capabilities: [140 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-
        Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
        Capabilities: [170 v1] Latency Tolerance Reporting
                Max snoop latency: 0ns
                Max no snoop latency: 0ns
        Capabilities: [178 v1] L1 PM Substates
                L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
                          PortCommonModeRestoreTime=150us PortTPowerOnTime=150us
                L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
                           T_CommonMode=0us LTR1.2_Threshold=0ns
                L1SubCtl2: T_PwrOn=10us
        Kernel driver in use: r8169
        Kernel modules: r8169

then I try

Code: Select all

apt install firmware-realtek

but it was alreaddy installed.

[Head_on_a_Stick]

Enter "RTL8821CE debian" into your favourite search engine. You should done that before opening a thread here: http://forums.debian.net/viewtopic.php?f=30&t=47078

And you can probably get your machine working with the stable release by installing the kernel & AMD firmware from the buster-backports repository: https://backports.debian.org/Instructions/

[hn3]

I found
https://askubuntu.com/questions/990378/ ... 571#990571
and do

Code: Select all

sudo apt-get install --reinstall git dkms build-essential linux-headers-$(uname -r)
git clone https://github.com/tomaspinho/rtl8821ce
cd rtl8821ce
chmod +x dkms-install.sh
chmod +x dkms-remove.sh
sudo ./dkms-install.sh

no idea was I realy have done with this, but after restart wlan is just fine.
Now I try to get the keyboard backlight on.
So I try to get Faustus to work.
https://github.com/hackbnw/faustus

[hn3]

I did not know about that.
https://backports.debian.org/Instructions/
If I had not posted my trouble, I probable never come to this idea.
Perhaps faustus run better with buster and the backports.

[stevepusser]

You could install inxi and give us the result of "inxi -Fxxz" so we have some idea of what's in your machine.

Hmmm--Debian hasn't backported hw-probe for Buster, though it's fairly trivial. That is orders of magnitude more thorough that even inxi.

[hn3]

I swiched back to buster
after installation
ctrl + alt + f3

Code: Select all

su
sudo apt install linux-image-amd64 firmware-linux firmware-linux-free firmware-linux-nonfree firmware-misc-nonfree 
sudo nano /etc/apt/sources.list

put in

Code: Select all

deb http://deb.debian.org/debian buster-backports main contrib non-free
deb-src http://deb.debian.org/debian buster-backports main contrib non-free

Code: Select all

sudo apt update
apt upgrade
apt-get -t buster-backports install firmware-amd-graphics
buster-backports install linux-image-amd64
sudo shutdown -h now

X is running.
So Head_on_a_Stick is right with that.
so I tryed

Code: Select all

apt-get -t buster-backports install firmware-realtek

but it did not work with my wlan chip so again

Code: Select all

sudo apt-get install --reinstall git dkms build-essential linux-headers-$(uname -r)
git clone https://github.com/tomaspinho/rtl8821ce
cd rtl8821ce
chmod +x dkms-install.sh
chmod +x dkms-remove.sh
sudo ./dkms-install.sh

Ok wlan and the X server is running on buster.
Thank you stevepusser inxi is nice:

Code: Select all

 inxi -Fxxz      
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = "",
        LC_ALL = (unset),
        LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:    Host: reddeck Kernel: 5.4.0-0.bpo.4-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           Desktop: KDE Plasma 5.14.5 tk: Qt 5.11.3 wm: kwin_x11 dm: SDDM 
           Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: Laptop System: ASUSTeK product: TUF Gaming FX705DY_FX705DY v: 1.0 serial: <filter> 
           Mobo: ASUSTeK model: FX705DY v: 1.0 serial: <filter> UEFI: American Megatrends 
           v: FX705DY.314 date: 11/01/2019 
Battery:   ID-1: BAT0 charge: 62.9 Wh condition: 62.9/67.1 Wh (94%) volts: 16.3/16.3 
           model: ASUSTeK ASUS Battery serial: <filter> status: Not charging 
CPU:       Topology: Quad Core model: AMD Ryzen 5 3550H with Radeon Vega Mobile Gfx bits: 64 
           type: MT MCP arch: Zen rev: 1 L1 cache: 384 KiB L2 cache: 2048 KiB L3 cache: 4096 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 33535 
           Speed: 1224 MHz min/max: 1400/2100 MHz Core speeds (MHz): 1: 1156 2: 1185 3: 1380 
           4: 1289 5: 1158 6: 1214 7: 1208 8: 1312 
Graphics:  Device-1: AMD Baffin [Radeon RX 460] vendor: ASUSTeK driver: amdgpu v: kernel 
           bus ID: 01:00.0 chip ID: 1002:67ef 
           Device-2: AMD Picasso vendor: ASUSTeK driver: amdgpu v: kernel bus ID: 05:00.0 
           chip ID: 1002:15d8 
           Display: x11 server: X.Org 1.20.4 driver: amdgpu FAILED: ati 
           unloaded: fbdev,modesetting,vesa compositor: kwin_x11 resolution: 1920x1080~60Hz 
           OpenGL: renderer: AMD RAVEN (DRM 3.35.0 5.4.0-0.bpo.4-amd64 LLVM 7.0.1) 
           v: 4.5 Mesa 18.3.6 direct render: Yes 
Audio:     Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: ASUSTeK driver: snd_hda_intel 
           v: kernel bus ID: 05:00.1 chip ID: 1002:15de 
           Device-2: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel 
           bus ID: 05:00.6 chip ID: 1022:15e3 
           Sound Server: ALSA v: k5.4.0-0.bpo.4-amd64 
Network:   Device-1: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter vendor: AzureWave 
           driver: rtl8821ce v: N/A port: e000 bus ID: 03:00.0 chip ID: 10ec:c821 
           IF: wlp3s0 state: up mac: <filter> 
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK 
           driver: r8169 v: kernel port: d000 bus ID: 04:00.0 chip ID: 10ec:8168 
           IF: enp4s0 state: down mac: <filter> 
Drives:    Local Storage: total: 476.94 GiB used: 8.14 GiB (1.7%) 
           ID-1: /dev/nvme0n1 vendor: Micron model: 2200V MTFDHBA512TCK size: 476.94 GiB 
           speed: 31.6 Gb/s lanes: 4 serial: <filter> 
Partition: ID-1: / size: 27.38 GiB used: 6.35 GiB (23.2%) fs: ext4 dev: /dev/nvme0n1p2 
           ID-2: /home size: 424.89 GiB used: 1.78 GiB (0.4%) fs: ext4 dev: /dev/nvme0n1p4 
           ID-3: swap-1 size: 15.81 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/nvme0n1p3 
Sensors:   System Temperatures: cpu: 43.1 C mobo: N/A gpu: amdgpu temp: 43 C 
           Fan Speeds (RPM): N/A 
Info:      Processes: 242 Uptime: 1h 00m Memory: 15.52 GiB used: 1.30 GiB (8.4%) Init: systemd 
           v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 running in: konsole 
           inxi: 3.0.32 

I hit back to faustushttps://github.com/hackbnw/faustus
to get the fan controll run and the keybard backlight
The keyboard nacklight is still not working.

[hn3]

My Faustus problem:
I hit back to faustushttps://github.com/hackbnw/faustus
to get the fan controll run and the keybard backlight
downloaded it and unpacked it in a local folder.

Code: Select all

cd  /etc/modprobe.d
nano faustus.conf

insert

Code: Select all

blacklist asus_wmi
blacklist asus_nb_wmi

than I went to the created folfer faustus-master

Code: Select all

sudo rmmod asus_nb_wmi
sudo rmmod asus_wmisudo
apt-get install dkms
make
sudo modprobe sparse-keymap wmi video
sudo insmod src/faustus.ko

then with

Code: Select all

dmesg | tail

comes the following output

Code: Select all

[ 3618.190836] [drm] VCE initialized successfully.
[ 3624.893041] amdgpu 0000:01:00.0: GPU pci config reset
[ 5572.146656] faustus: DMI checK: FX705DY
[ 5572.146888] faustus: Initialization: 0x1
[ 5572.146991] faustus: BIOS WMI version: 9.0
[ 5572.147053] faustus: SFUN value: 0x21
[ 5572.147057] faustus faustus: Use DSTS
[ 5572.147059] faustus faustus: Enable event queue
[ 5572.149451] input: Asus WMI hotkeys as /devices/platform/faustus/input/input17
[ 5572.149722] faustus: Number of fans: 0

fn + F5 and the fanmode change I can hear that.

Code: Select all

sudo rmmod faustus

fan mode switchin is diabled
Now I want a permanent Installation with of Faustus.

Code: Select all

 sudo make dkms

Code: Select all

Error! There are no instances of module: faustus
0.1 located in the DKMS tree.

------------------------------
Deleting module version: 0.2
completely from the DKMS tree.
------------------------------
Done.
dkms add .

Creating symlink /var/lib/dkms/faustus/0.2/source ->
                 /usr/src/faustus-0.2

DKMS: add completed.
dkms install -m faustus -v 0.2

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area...(bad exit status: 2)
make -j8 KERNELRELEASE=5.4.0-0.bpo.4-amd64 -C /lib/modules/5.4.0-0.bpo.4-amd64/build SUBDIRS=/var/lib/dkms/faustus/0.2/build modules...(bad exit status: 2)
Error! Bad return status for module build on kernel: 5.4.0-0.bpo.4-amd64 (x86_64)
Consult /var/lib/dkms/faustus/0.2/build/make.log for more information.
make: *** [Makefile:24: dkms] Error 10

An Erroran in the

Code: Select all

/var/lib/dkms/faustus/0.2/build/make.log 

I find

Code: Select all

DKMS make.log for faustus-0.2 for kernel 5.4.0-0.bpo.4-amd64 (x86_64)
Thu Apr 30 11:47:46 CEST 2020
make[1]: Entering directory '/usr/src/linux-headers-5.4.0-0.bpo.4-amd64'
sh: 0: Can't open /usr/src/linux-headers-5.4.0-0.bpo.4-common/scripts/mkmakefile
make[3]: *** [/usr/src/linux-headers-5.4.0-0.bpo.4-common/Makefile:513: outputmakefile] Error 127
make[3]: *** Waiting for unfinished jobs....
/usr/src/linux-headers-5.4.0-0.bpo.4-common/scripts/Makefile.build:42: /usr/src/linux-headers-5.4.0-0.$
make[4]: *** No rule to make target '/usr/src/linux-headers-5.4.0-0.bpo.4-common/scripts/basic/Makefil$
make[3]: *** [/usr/src/linux-headers-5.4.0-0.bpo.4-common/Makefile:499: scripts_basic] Error 2
make[2]: *** [/usr/src/linux-headers-5.4.0-0.bpo.4-common/Makefile:677: include/config/auto.conf.cmd] $
make[1]: *** [/usr/src/linux-headers-5.4.0-0.bpo.4-common/Makefile:179: sub-make] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-5.4.0-0.bpo.4-amd64'

Code: Select all

 sudo make dkms

[hn3]

Hallo,
hackbnw fixed the problem of Faustus with debian
https://github.com/hackbnw/faustus/issues/30

To get the fan control and the keybord backlight control simply follow the instruction:
https://github.com/hackbnw/faustus
the permanent intallation is finished with

Code: Select all

sudo make onboot