apache 2.4 you don't have permission to access /index.php

Kernels & Hardware, configuring network, installing services

apache 2.4 you don't have permission to access /index.php

Postby syscon » 2020-10-26 01:50

I'm running the server and upgraded one of the box to apache 2.4
The server is running OK but I can not access admin site:

http://www.syscon.ca/admin/login.php

Code: Select all
"apache 2.4 you don't have permission to access /login.php on this server"


I disable almost everthing in server/admin/.htaccess
.htaccess:
Code: Select all
# $Id: .htaccess,v 1.1 2003/06/20 00:18:30 hpdl Exp $
#
# This is used with Apache WebServers
#
# For this to work, you must include the parameter 'Options' to
# the AllowOverride configuration
#
# Example:
#
# <Directory "/usr/local/apache/htdocs">
#   AllowOverride Options
# </Directory>
#
# 'All' with also work. (This configuration is in the
# apache/conf/httpd.conf file)

# The following makes adjustments to the SSL protocol for Internet
# Explorer browsers

#<IfModule mod_setenvif.c>
#  <IfDefine SSL>
#    SetEnvIf User-Agent ".*MSIE.*" \
#             nokeepalive ssl-unclean-shutdown \
#             downgrade-1.0 force-response-1.0
#  </IfDefine>
#</IfModule>

#<Limit GET POST>
#order deny,allow
#AllowOverride none
#deny from all
#allow from 10.0.0.101
#allow from 10.0.0.112
#Require all granted
#</Limit>

AuthName "restricted stuff"
AuthType Basic
AuthUserFile /etc/apache2/users
require user webmaster


apache2.conf
Code: Select all
 # This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.

# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
#   /etc/apache2/
#   |-- apache2.conf
#   |   `--  ports.conf
#   |-- mods-enabled
#   |   |-- *.load
#   |   `-- *.conf
#   |-- conf-enabled
#   |   `-- *.conf
#    `-- sites-enabled
#       `-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
#   together by including all remaining configuration files when starting up the
#   web server.
#
# * ports.conf is always included from the main configuration file. It is
#   supposed to determine listening ports for incoming connections which can be
#   customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
#   directories contain particular configuration snippets which manage modules,
#   global configuration fragments, or virtual host configurations,
#   respectively.
#
#   They are activated by symlinking available configuration files from their
#   respective *-available/ counterparts. These should be managed by using our
#   helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
#   their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
#   the default configuration, apache2 needs to be started/stopped with
#   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
#   work with the default configuration.


# Global configuration
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the Mutex documentation (available
# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#Mutex file:${APACHE_LOCK_DIR} default

#
# The directory where shm and other runtime files will be stored.
#

DefaultRuntimeDir ${APACHE_RUN_DIR}

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5


# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log

#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn

# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf

# Include list of ports to listen on
Include ports.conf


# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
<Directory />
   Options FollowSymLinks
   AllowOverride None
   Require all denied
</Directory>

<Directory /usr/share>
   AllowOverride None
   Require all granted
</Directory>

<Directory /var/www/>
   Options Indexes FollowSymLinks
   AllowOverride None
   Require all granted
</Directory>

#<Directory /srv/>
#   Options FollowSymLinks
#   AllowOverride None
#   Require all granted
#</Directory>




# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
   Require all denied
</FilesMatch>


#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf

# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

#ServerName 127.0.0.1


/etc/apache2/sites-enabled/vhost.conf
Code: Select all
#This is where we store the VirtualHosts configuration.
#
#Since Apache 1.3.19, we modified the setup to include some nice tricks:
#
#- Added SuExecUserGroup [user] [group] directive so VirtualHosts now work with
#  suexec directive. If set, Apache will run all cgi scripts under that
#  user and group (provided the uid and gid are > 1000 for security). The
#  directories and cgi files *must* belong to that user/group for the
#  feature to work
#- We added the Setenv VLOG directive. This works in conjunction with
#  the CustomLog in commonapache2.conf. When Setenv VLOG is set, apache will
#  create a /var/log/apache2/VLOG-YYYY-MM-<ServerName>.log instead of logging
#  to access_log. Use this instead of defining a special logfile for
#  each vhost, otherwise you eat up file descriptors.
#- You can also specify a path for the VLOG for each Vhost, for example,
#  to place the logs in each user's directory. However, if you want to
#  use the file for accounting, place it in a directory owned by root,
#  otherwise the user will be able to erase it.
#- I suggest only including the ErrorLog *only* if the vhost will use
#  cgi scripts. Again, it saves file descriptors!

################# Named VirtualHosts
NameVirtualHost *:80
<VirtualHost *:80>
ServerName www.syscon.ca
DocumentRoot /var/www/syscon_ca/catalog
Setenv VLOG /var/log/apache2/syscon_log
ErrorLog /var/log/apache2/syscon_error_log
</VirtualHost>

NameVirtualHost *:443
<VirtualHost *:443>
ServerName www.syscon.ca
DocumentRoot /var/www/syscon_ca/catalog
Setenv VLOG /var/log/apache2/syscon_log
ErrorLog /var/log/apache2/ssl_syscon_error_log
SSLEngine on
SSLCertificateFile /etc/apache2/ssl/www_syscon_ca.crt
SSLCertificateKeyFile /etc/apache2/ssl/www_syscon_ca.key
SSLCACertificateFile /etc/apache2/ssl/intermediate.crt
</VirtualHost>
 
syscon
 
Posts: 13
Joined: 2020-10-24 18:35

Return to System configuration

Who is online

Users browsing this forum: hemilexies12 and 18 guests

fashionable