[SOLVED] Wheezy Radeon/Intel Graphics switcheroo

Kernels & Hardware, configuring network, installing services

[SOLVED] Wheezy Radeon/Intel Graphics switcheroo

Postby skipjack » 2011-04-16 11:53

I haven't posted on here before because I usually can figure out to do this things with google and enough time. But, I can't seem to figure this one out, so I am biting the bullet and seeing if anyone out there can help. Thanks in advance!

So the problem... I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...

Code: Select all
(~)$ uname -a
Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux


Code: Select all
(~)$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]


Code: Select all
(~)$ lsmod | grep 'radeon\|i915'
radeon                641556  0
ttm                    46672  1 radeon
i915                  276436  3
drm_kms_helper         26501  2 radeon,i915
drm                   128416  6 radeon,ttm,i915,drm_kms_helper
i2c_algo_bit           12706  2 radeon,i915
i2c_core               18989  7 radeon,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit,videodev
power_supply           13283  3 radeon,battery,ac
video                  17345  1 i915
button                 12866  1 i915


Code: Select all
(~)$ cat /sys/kernel/debug/vgaswitcheroo/switch
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :Pwr:0000:01:00.0


dmesg
Code: Select all
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-2-686 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 05:24:21 UTC 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[    0.000000]  BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000b3675000 (usable)
[    0.000000]  BIOS-e820: 00000000b3675000 - 00000000b36bf000 (reserved)
[    0.000000]  BIOS-e820: 00000000b36bf000 - 00000000b373b000 (usable)
[    0.000000]  BIOS-e820: 00000000b373b000 - 00000000b37bf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000b37bf000 - 00000000b37e1000 (usable)
[    0.000000]  BIOS-e820: 00000000b37e1000 - 00000000b37ff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000b37ff000 - 00000000b3800000 (usable)
[    0.000000]  BIOS-e820: 00000000b3800000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Acer Aspire 4820TG/JM41_CP, BIOS V1.25 03/16/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0xb3800 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0B8000000 mask FF8000000 uncachable
[    0.000000]   4 base 0B4000000 mask FFC000000 uncachable
[    0.000000]   5 base 0B3800000 mask FFF800000 uncachable
[    0.000000]   6 base 100000000 mask FC0000000 write-back
[    0.000000]   7 base 138000000 mask FF8000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[    0.000000] RAMDISK: 37713000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 36e36000 - 37712946
[    0.000000] Move RAMDISK from 0000000037713000 - 0000000037fef945 to 36e36000 - 37712945
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT b37fe120 0007C (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP b37fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT b37ed000 0BE66 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS b375f000 00040
[    0.000000] ACPI: ASF! b37fd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: HPET b37fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC b37fa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG b37f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC b37ec000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT b37e9000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: ASPT b37e5000 00034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: WDAT b37e4000 00224 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SSDT b37e3000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT b37e1000 01F58 (v01 AmdRef  AmdTabl 00001000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1984MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000b3800
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000b3675
[    0.000000]     0: 0x000b36bf -> 0x000b373b
[    0.000000]     0: 0x000b37bf -> 0x000b37e1
[    0.000000]     0: 0x000b37ff -> 0x000b3800
[    0.000000] On node 0 totalpages: 734881
[    0.000000] free_area_init_node: node 0, pgdat c13ea5c0, node_mem_map f57c6200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 3969 pages used for memmap
[    0.000000]   HighMem zone: 503701 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f5000000 s27136 r0 d22016 u524288
[    0.000000] pcpu-alloc: s27136 r0 d22016 u524288 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 729136
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=5fc2201d-175f-405f-bd99-f613617c2dd5 ro quiet radeon.modeset=1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:000b3800)
[    0.000000] Memory: 2901208k/2940928k available (2646k kernel code, 38316k reserved, 1389k data, 392k init, 2030680k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc13f1000 - 0xc1453000   ( 392 kB)
[    0.000000]       .data : 0xc1295864 - 0xc13f0e80   (1389 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1295864   (2646 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]    RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:1280
[    0.000000] CPU 0 irqstacks, hard=f4c0c000 soft=f4c0e000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2660.589 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5321.17 BogoMIPS (lpj=10642356)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000069] Security Framework initialized
[    0.000072] SELinux:  Disabled at boot.
[    0.000094] Mount-cache hash table entries: 512
[    0.000330] Initializing cgroup subsys ns
[    0.000333] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.000335] Initializing cgroup subsys cpuacct
[    0.000361] Initializing cgroup subsys devices
[    0.000363] Initializing cgroup subsys freezer
[    0.000364] Initializing cgroup subsys net_cls
[    0.000366] Initializing cgroup subsys blkio
[    0.000397] CPU: Physical Processor ID: 0
[    0.000398] CPU: Processor Core ID: 0
[    0.000402] mce: CPU supports 9 MCE banks
[    0.000411] CPU0: Thermal monitoring enabled (TM1)
[    0.000417] using mwait in idle threads.
[    0.001381] ACPI: Core revision 20110112
[    0.028694] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.029087] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068679] CPU0: Intel(R) Core(TM) i5 CPU       M 480  @ 2.67GHz stepping 05
[    0.174819] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.174824] ... version:                3
[    0.174825] ... bit width:              48
[    0.174826] ... generic registers:      4
[    0.174827] ... value mask:             0000ffffffffffff
[    0.174828] ... max period:             000000007fffffff
[    0.174829] ... fixed-purpose events:   3
[    0.174830] ... event mask:             000000070000000f
[    0.175050] NMI watchdog enabled, takes one hw-pmu counter.
[    0.175105] CPU 1 irqstacks, hard=f4d24000 soft=f4d26000
[    0.175109] Booting Node   0, Processors  #1
[    0.185347] Initializing CPU#1
[    0.282693] NMI watchdog enabled, takes one hw-pmu counter.
[    0.282768] CPU 2 irqstacks, hard=f4d52000 soft=f4d54000
[    0.282771]  #2
[    0.292898] Initializing CPU#2
[    0.390461] NMI watchdog enabled, takes one hw-pmu counter.
[    0.390532] CPU 3 irqstacks, hard=f4d60000 soft=f4d62000
[    0.390534]  #3
[    0.400660] Initializing CPU#3
[    0.498124] NMI watchdog enabled, takes one hw-pmu counter.
[    0.498157] Brought up 4 CPUs
[    0.498159] Total of 4 processors activated (21283.69 BogoMIPS).
[    0.499838] devtmpfs: initialized
[    0.500119] print_constraints: dummy:
[    0.500175] NET: Registered protocol family 16
[    0.500234] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.500236] ACPI: bus type pci registered
[    0.500339] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.500342] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.500343] PCI: Using MMCONFIG for extended config space
[    0.500344] PCI: Using configuration type 1 for base access
[    0.500657] bio: create slab <bio-0> at 0
[    0.502028] ACPI: EC: Look up EC in DSDT
[    0.503242] ACPI: Executed 1 blocks of module-level executable AML code
[    0.526026] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.550328] ACPI: SSDT b3691a18 00474 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.550627] ACPI: Dynamic OEM Table Load:
[    0.550629] ACPI: SSDT   (null) 00474 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.550756] ACPI: SSDT b368f018 008E0 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.551038] ACPI: Dynamic OEM Table Load:
[    0.551040] ACPI: SSDT   (null) 008E0 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.574160] ACPI: SSDT b3690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.574495] ACPI: Dynamic OEM Table Load:
[    0.574496] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.586015] ACPI: SSDT b368ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.586319] ACPI: Dynamic OEM Table Load:
[    0.586321] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.598406] ACPI: Interpreter enabled
[    0.598409] ACPI: (supports S0 S3 S4 S5)
[    0.598432] ACPI: Using IOAPIC for interrupt routing
[    0.611509] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.611636] ACPI: No dock devices found.
[    0.611637] HEST: Table not found.
[    0.611640] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.611925] \_SB_.PCI0:_OSC invalid UUID
[    0.611927] _OSC request data:1 8 1f
[    0.611930] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.612422] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.612424] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.612425] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.612428] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff]
[    0.612437] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    0.612453] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.612468] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[    0.612489] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.612492] pci 0000:00:01.0: PME# disabled
[    0.612502] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[    0.612511] pci 0000:00:02.0: reg 10: [mem 0xd8000000-0xd83fffff 64bit]
[    0.612517] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.612521] pci 0000:00:02.0: reg 20: [io  0x4050-0x4057]
[    0.612576] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    0.612603] pci 0000:00:16.0: reg 10: [mem 0xdc506100-0xdc50610f 64bit]
[    0.612675] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.612679] pci 0000:00:16.0: PME# disabled
[    0.612718] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    0.613117] pci 0000:00:1a.0: reg 10: [mem 0xdc505c00-0xdc505fff]
[    0.615403] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.615407] pci 0000:00:1a.0: PME# disabled
[    0.615436] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    0.615457] pci 0000:00:1b.0: reg 10: [mem 0xdc500000-0xdc503fff 64bit]
[    0.615531] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.615535] pci 0000:00:1b.0: PME# disabled
[    0.615560] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.615636] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.615640] pci 0000:00:1c.0: PME# disabled
[    0.615672] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[    0.615748] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.615752] pci 0000:00:1c.5: PME# disabled
[    0.615787] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    0.616173] pci 0000:00:1d.0: reg 10: [mem 0xdc505800-0xdc505bff]
[    0.618458] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.618462] pci 0000:00:1d.0: PME# disabled
[    0.618485] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.618559] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    0.618676] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    0.618701] pci 0000:00:1f.2: reg 10: [io  0x4048-0x404f]
[    0.618712] pci 0000:00:1f.2: reg 14: [io  0x405c-0x405f]
[    0.618722] pci 0000:00:1f.2: reg 18: [io  0x4040-0x4047]
[    0.618732] pci 0000:00:1f.2: reg 1c: [io  0x4058-0x405b]
[    0.618743] pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
[    0.618753] pci 0000:00:1f.2: reg 24: [mem 0xdc505000-0xdc5057ff]
[    0.618800] pci 0000:00:1f.2: PME# supported from D3hot
[    0.618804] pci 0000:00:1f.2: PME# disabled
[    0.618825] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.618845] pci 0000:00:1f.3: reg 10: [mem 0xdc506000-0xdc5060ff 64bit]
[    0.618874] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    0.618918] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    0.618944] pci 0000:00:1f.6: reg 10: [mem 0xdc504000-0xdc504fff 64bit]
[    0.619049] pci 0000:01:00.0: [1002:68c1] type 0 class 0x000300
[    0.619061] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.619071] pci 0000:01:00.0: reg 18: [mem 0xdc400000-0xdc41ffff 64bit]
[    0.619077] pci 0000:01:00.0: reg 20: [io  0x3000-0x30ff]
[    0.619088] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    0.619103] pci 0000:01:00.0: supports D1 D2
[    0.619120] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
[    0.619132] pci 0000:01:00.1: reg 10: [mem 0xdc420000-0xdc423fff 64bit]
[    0.619171] pci 0000:01:00.1: supports D1 D2
[    0.619189] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.619191] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.619193] pci 0000:00:01.0:   bridge window [mem 0xdc400000-0xdc4fffff]
[    0.619196] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.619270] pci 0000:02:00.0: [1969:1073] type 0 class 0x000200
[    0.619300] pci 0000:02:00.0: reg 10: [mem 0xdb400000-0xdb43ffff 64bit]
[    0.619315] pci 0000:02:00.0: reg 18: [io  0x2000-0x207f]
[    0.619416] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.619421] pci 0000:02:00.0: PME# disabled
[    0.619463] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.619467] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.619472] pci 0000:00:1c.0:   bridge window [mem 0xdb400000-0xdc3fffff]
[    0.619479] pci 0000:00:1c.0:   bridge window [mem 0xd8400000-0xd93fffff 64bit pref]
[    0.619549] pci 0000:03:00.0: [168c:002e] type 0 class 0x000280
[    0.619571] pci 0000:03:00.0: reg 10: [mem 0xda400000-0xda40ffff 64bit]
[    0.619652] pci 0000:03:00.0: supports D1
[    0.619654] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.619658] pci 0000:03:00.0: PME# disabled
[    0.619690] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[    0.619694] pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
[    0.619699] pci 0000:00:1c.5:   bridge window [mem 0xda400000-0xdb3fffff]
[    0.619705] pci 0000:00:1c.5:   bridge window [mem 0xd9400000-0xda3fffff 64bit pref]
[    0.619775] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.619780] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.619784] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.619791] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.619793] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.619795] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.619797] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.619799] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[    0.619820] pci_bus 0000:00: on NUMA node 0
[    0.619823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.619953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.619995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.620047] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.620121] \_SB_.PCI0:_OSC invalid UUID
[    0.620122] _OSC request data:1 1f 1f
[    0.620125]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.620150] \_SB_.PCI0:_OSC invalid UUID
[    0.620151] _OSC request data:1 0 1d
[    0.623267] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
[    0.623317] pci 0000:7f:00.0: [8086:2c62] type 0 class 0x000600
[    0.623332] pci 0000:7f:00.1: [8086:2d01] type 0 class 0x000600
[    0.623348] pci 0000:7f:02.0: [8086:2d10] type 0 class 0x000600
[    0.623362] pci 0000:7f:02.1: [8086:2d11] type 0 class 0x000600
[    0.623375] pci 0000:7f:02.2: [8086:2d12] type 0 class 0x000600
[    0.623389] pci 0000:7f:02.3: [8086:2d13] type 0 class 0x000600
[    0.623409] pci_bus 0000:7f: on NUMA node 0
[    0.623414]  pci0000:7f: Requesting ACPI _OSC control (0x1d)
[    0.623593] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.623627] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.623661] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.623694] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.623727] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.623761] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.623794] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.623827] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.623882] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.623888] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.623892] vgaarb: loaded
[    0.623916] PCI: Using ACPI for IRQ routing
[    0.623918] PCI: pci_cache_line_size set to 64 bytes
[    0.623982] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[    0.623984] reserve RAM buffer: 00000000b3675000 - 00000000b3ffffff
[    0.623986] reserve RAM buffer: 00000000b373b000 - 00000000b3ffffff
[    0.623988] reserve RAM buffer: 00000000b37e1000 - 00000000b3ffffff
[    0.623989] reserve RAM buffer: 00000000b3800000 - 00000000b3ffffff
[    0.624081] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.624085] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.626100] Switching to clocksource hpet
[    0.626938] pnp: PnP ACPI init
[    0.626949] ACPI: bus type pnp registered
[    0.627198] pnp 00:00: [bus 00-7e]
[    0.627201] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.627203] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.627205] pnp 00:00: [io  0x0d00-0xffff window]
[    0.627206] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.627208] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.627209] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.627211] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.627212] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.627214] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.627215] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.627217] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.627218] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.627220] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.627221] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.627223] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.627224] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.627226] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.627227] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
[    0.627229] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.627268] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.627320] pnp 00:01: [io  0x0000-0x001f]
[    0.627321] pnp 00:01: [io  0x0081-0x0091]
[    0.627323] pnp 00:01: [io  0x0093-0x009f]
[    0.627324] pnp 00:01: [io  0x00c0-0x00df]
[    0.627326] pnp 00:01: [dma 4]
[    0.627347] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.627353] pnp 00:02: [mem 0xff000000-0xffffffff]
[    0.627373] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.627434] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.627456] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.627463] pnp 00:04: [io  0x00f0]
[    0.627469] pnp 00:04: [irq 13]
[    0.627491] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.627499] pnp 00:05: [io  0x002e-0x002f]
[    0.627500] pnp 00:05: [io  0x004e-0x004f]
[    0.627501] pnp 00:05: [io  0x0061]
[    0.627503] pnp 00:05: [io  0x0063]
[    0.627504] pnp 00:05: [io  0x0065]
[    0.627505] pnp 00:05: [io  0x0067]
[    0.627506] pnp 00:05: [io  0x0070]
[    0.627507] pnp 00:05: [io  0x0080]
[    0.627508] pnp 00:05: [io  0x0092]
[    0.627509] pnp 00:05: [io  0x00b2-0x00b3]
[    0.627511] pnp 00:05: [io  0x0680-0x069f]
[    0.627512] pnp 00:05: [io  0x0800-0x080f]
[    0.627513] pnp 00:05: [io  0xffff]
[    0.627514] pnp 00:05: [io  0xffff]
[    0.627516] pnp 00:05: [io  0x0400-0x047f]
[    0.627517] pnp 00:05: [io  0x0500-0x057f]
[    0.627518] pnp 00:05: [io  0x164e-0x164f]
[    0.627526] pnp 00:05: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 13 [io  0x1000-0x1fff]
[    0.627558] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.627560] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.627562] system 00:05: [io  0xffff] has been reserved
[    0.627564] system 00:05: [io  0xffff] has been reserved
[    0.627566] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.627568] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.627570] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.627576] pnp 00:06: [io  0x0070-0x0077]
[    0.627580] pnp 00:06: [irq 8]
[    0.627601] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.627608] pnp 00:07: [io  0x0060]
[    0.627609] pnp 00:07: [io  0x0064]
[    0.627613] pnp 00:07: [irq 1]
[    0.627635] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.627643] pnp 00:08: [irq 12]
[    0.627666] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active)
[    0.627878] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.627879] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[    0.627881] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    0.627882] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    0.627884] pnp 00:09: [mem 0xf0000000-0xf1ffffff]
[    0.627885] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    0.627886] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[    0.627888] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[    0.627889] pnp 00:09: [mem 0xff000000-0xffffffff]
[    0.627891] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    0.627892] pnp 00:09: [mem 0xdc600000-0xdc600fff]
[    0.627939] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.627941] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.627943] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.627945] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.627947] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
[    0.627949] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.627951] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.627953] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.627955] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.627957] system 00:09: [mem 0xdc600000-0xdc600fff] has been reserved
[    0.627959] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.628062] pnp 00:0a: [bus 7f]
[    0.628095] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.628106] pnp: PnP ACPI: found 11 devices
[    0.628107] ACPI: ACPI bus type pnp unregistered
[    0.628109] PnPBIOS: Disabled by ACPI PNP
[    0.629761] Switched to NOHz mode on CPU #0
[    0.629809] Switched to NOHz mode on CPU #3
[    0.629873] Switched to NOHz mode on CPU #1
[    0.629895] Switched to NOHz mode on CPU #2
[    0.663821] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.663856] pci 0000:01:00.0: BAR 6: assigned [mem 0xdc440000-0xdc45ffff pref]
[    0.663858] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.663860] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.663863] pci 0000:00:01.0:   bridge window [mem 0xdc400000-0xdc4fffff]
[    0.663865] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.663869] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.663872] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.663877] pci 0000:00:1c.0:   bridge window [mem 0xdb400000-0xdc3fffff]
[    0.663882] pci 0000:00:1c.0:   bridge window [mem 0xd8400000-0xd93fffff 64bit pref]
[    0.663889] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[    0.663892] pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
[    0.663898] pci 0000:00:1c.5:   bridge window [mem 0xda400000-0xdb3fffff]
[    0.663902] pci 0000:00:1c.5:   bridge window [mem 0xd9400000-0xda3fffff 64bit pref]
[    0.663909] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.663911] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.663916] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.663920] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.663934] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.663936] pci 0000:00:01.0: setting latency timer to 64
[    0.663944] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.663948] pci 0000:00:1c.0: setting latency timer to 64
[    0.663954] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.663959] pci 0000:00:1c.5: setting latency timer to 64
[    0.663965] pci 0000:00:1e.0: setting latency timer to 64
[    0.663969] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.663971] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.663973] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.663974] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[    0.663976] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.663977] pci_bus 0000:01: resource 1 [mem 0xdc400000-0xdc4fffff]
[    0.663979] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.663981] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.663982] pci_bus 0000:02: resource 1 [mem 0xdb400000-0xdc3fffff]
[    0.663984] pci_bus 0000:02: resource 2 [mem 0xd8400000-0xd93fffff 64bit pref]
[    0.663986] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.663987] pci_bus 0000:03: resource 1 [mem 0xda400000-0xdb3fffff]
[    0.663989] pci_bus 0000:03: resource 2 [mem 0xd9400000-0xda3fffff 64bit pref]
[    0.663991] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.663992] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.663994] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.663996] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfeafffff]
[    0.664037] NET: Registered protocol family 2
[    0.664096] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.664230] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.664450] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.664573] TCP: Hash tables configured (established 131072 bind 65536)
[    0.664576] TCP reno registered
[    0.664578] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.664583] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.664737] NET: Registered protocol family 1
[    0.664749] pci 0000:00:02.0: Boot video device
[    0.693991] PCI: CLS 64 bytes, default 64
[    0.694046] Unpacking initramfs...
[    0.873094] Freeing initrd memory: 9076k freed
[    0.875033] Simple Boot Flag at 0x44 set to 0x1
[    0.875404] audit: initializing netlink socket (disabled)
[    0.875413] type=2000 audit(1302953194.704:1): initialized
[    0.881737] highmem bounce pool size: 64 pages
[    0.881741] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.883085] VFS: Disk quotas dquot_6.5.2
[    0.883172] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.883274] msgmni has been set to 1717
[    0.883436] alg: No test for stdrng (krng)
[    0.883489] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.883492] io scheduler noop registered
[    0.883493] io scheduler deadline registered
[    0.883500] io scheduler cfq registered (default)
[    0.883561] pcieport 0000:00:01.0: setting latency timer to 64
[    0.883582] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.883791] ERST: Table is not found!
[    0.883801] isapnp: Scanning for PnP cards...
[    1.237035] isapnp: No Plug & Play device found
[    1.237090] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.237565] Linux agpgart interface v0.103
[    1.237645] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    1.237714] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.238472] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[    1.238600] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.238716] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.244989] i8042: Detected active multiplexing controller, rev 1.1
[    1.248726] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.248735] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.248745] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.248747] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.248749] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.248895] mousedev: PS/2 mouse device common for all mice
[    1.248935] rtc_cmos 00:06: RTC can wake from S4
[    1.248991] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.249019] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.249026] cpuidle: using governor ladder
[    1.249027] cpuidle: using governor menu
[    1.249197] TCP cubic registered
[    1.249297] NET: Registered protocol family 10
[    1.249728] Mobile IPv6
[    1.249730] NET: Registered protocol family 17
[    1.249733] Registering the dns_resolver key type
[    1.249747] Using IPI No-Shortcut mode
[    1.249807] PM: Hibernation image not present or could not be loaded.
[    1.249815] registered taskstats version 1
[    1.250223] rtc_cmos 00:06: setting system clock to 2011-04-16 11:26:35 UTC (1302953195)
[    1.250254] Initalizing network drop monitor service
[    1.250304] Freeing unused kernel memory: 392k freed
[    1.250398] Write protecting the kernel text: 2648k
[    1.250417] Write protecting the kernel read-only data: 1000k
[    1.261063] <30>udev[59]: starting version 167
[    1.269937] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.290370] atl1c 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.290383] atl1c 0000:02:00.0: setting latency timer to 64
[    1.303957] thermal LNXTHERM:00: registered as thermal_zone0
[    1.303960] ACPI: Thermal Zone [THRM] (47 C)
[    1.318572] usbcore: registered new interface driver usbfs
[    1.318596] usbcore: registered new interface driver hub
[    1.318629] usbcore: registered new device driver usb
[    1.322127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.322158] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.322178] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.322183] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.322225] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.330033] SCSI subsystem initialized
[    1.342480] libata version 3.00 loaded.
[    1.344471] ehci_hcd 0000:00:1a.0: debug port 2
[    1.348338] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.348358] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdc505c00
[    1.360445] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.360476] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.360480] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.360484] usb usb1: Product: EHCI Host Controller
[    1.360488] usb usb1: Manufacturer: Linux 2.6.38-2-686 ehci_hcd
[    1.360491] usb usb1: SerialNumber: 0000:00:1a.0
[    1.360594] hub 1-0:1.0: USB hub found
[    1.360597] hub 1-0:1.0: 3 ports detected
[    1.360668] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.360681] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.360685] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.360690] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.380393] ehci_hcd 0000:00:1d.0: debug port 2
[    1.384268] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.384280] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdc505800
[    1.396311] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.396334] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.396338] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.396342] usb usb2: Product: EHCI Host Controller
[    1.396345] usb usb2: Manufacturer: Linux 2.6.38-2-686 ehci_hcd
[    1.396349] usb usb2: SerialNumber: 0000:00:1d.0
[    1.396456] hub 2-0:1.0: USB hub found
[    1.396459] hub 2-0:1.0: 3 ports detected
[    1.396512] ahci 0000:00:1f.2: version 3.0
[    1.396526] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.396569] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.396601] ahci: SSS flag set, parallel bus scan disabled
[    1.396637] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.396639] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[    1.396644] ahci 0000:00:1f.2: setting latency timer to 64
[    1.404682] scsi0 : ahci
[    1.404768] scsi1 : ahci
[    1.404824] scsi2 : ahci
[    1.404882] scsi3 : ahci
[    1.404948] ata1: SATA max UDMA/133 abar m2048@0xdc505000 port 0xdc505100 irq 41
[    1.404951] ata2: SATA max UDMA/133 abar m2048@0xdc505000 port 0xdc505180 irq 41
[    1.404952] ata3: DUMMY
[    1.404953] ata4: DUMMY
[    1.444807] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
[    1.671664] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.723555] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.766942] ata1.00: ATA-8: TOSHIBA MK6465GSX, GJ002J, max UDMA/100
[    1.766947] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.767732] ata1.00: configured for UDMA/100
[    1.767844] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6465GS GJ00 PQ: 0 ANSI: 5
[    1.803746] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.803751] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.803887] hub 1-1:1.0: USB hub found
[    1.803984] hub 1-1:1.0: 6 ports detected
[    1.871205] Refined TSC clocksource calibration: 2660.460 MHz.
[    1.871211] Switching to clocksource tsc
[    1.915099] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    2.047176] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.047181] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.047444] hub 2-1:1.0: USB hub found
[    2.047543] hub 2-1:1.0: 8 ports detected
[    2.118769] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
[    2.316676] usb 1-1.1: New USB device found, idVendor=0402, idProduct=9665
[    2.316682] usb 1-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    2.316686] usb 1-1.1: Product: 1.3M WebCam
[    2.316690] usb 1-1.1: Manufacturer: XPAAE03EW
[    2.489762] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.493834] ata2.00: ATAPI: HL-DT-ST DVDRAM GU10N, AP04, max UDMA/133
[    2.498695] ata2.00: configured for UDMA/133
[    2.504197] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU10N     AP04 PQ: 0 ANSI: 5
[    2.512232] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    2.512282] sd 0:0:0:0: [sda] Write Protect is off
[    2.512284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.512308] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.516939] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.516943] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.517101] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.611781]  sda: sda1 sda2 < sda5 > sda3
[    2.612093] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.615587] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.615715] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.170711] PM: Starting manual resume from disk
[    3.170715] PM: Hibernation image partition 8:5 present
[    3.170716] PM: Looking for hibernation image.
[    3.170867] PM: Image not found (code -22)
[    3.170870] PM: Hibernation image not present or could not be loaded.
[    3.246535] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.014412] <30>udev[381]: starting version 167
[    5.351493] input: PC Speaker as /devices/platform/pcspkr/input/input1
[    5.399552] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input2
[    5.399583] ACPI: Power Button [PWRB]
[    5.399619] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input3
[    5.399691] ACPI: Lid Switch [LID0]
[    5.399726] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input4
[    5.399752] ACPI: Sleep Button [SLPB]
[    5.399788] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    5.399809] ACPI: Power Button [PWRF]
[    5.642983] wmi: Mapper loaded
[    5.688778] ACPI: acpi_idle registered with cpuidle
[    5.694625] Monitor-Mwait will be used to enter C-1 state
[    5.694650] Monitor-Mwait will be used to enter C-3 state
[    5.757111] cfg80211: Calling CRDA to update world regulatory domain
[    5.786007] acer-wmi: Acer Laptop ACPI-WMI Extras
[    5.786298] acer-wmi: Function bitmap for Communication Button: 0x1
[    5.786401] acer-wmi: Brightness must be controlled by generic video driver
[    5.786799] input: Acer WMI hotkeys as /devices/virtual/input/input6
[    6.129076] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000
[    6.175269] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[    6.384981] ACPI: AC Adapter [ACAD] (on-line)
[    6.385761] ACPI: Battery Slot [BAT1] (battery present)
[    6.401704] Linux video capture interface: v2.00
[    6.410430] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    6.410435] ACPI: resource 0000:00:1f.3 [io  0x4000-0x401f] conflicts with ACPI region SMBI [io 0x4000-0x400f]
[    6.410436] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.461970] [drm] Initialized drm 1.1.0 20060810
[    6.474771] uvcvideo: Found UVC 1.00 device 1.3M WebCam (0402:9665)
[    6.477246] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8
[    6.477303] usbcore: registered new interface driver uvcvideo
[    6.477304] USB Video Class driver (v1.0.0)
[    6.794103] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.794109] i915 0000:00:02.0: setting latency timer to 64
[    6.809426] mtrr: no more MTRRs available
[    6.809428] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    6.809782] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[    6.809786] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.809787] [drm] Driver supports precise vblank timestamp query.
[    6.877140] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    6.877151] ath9k 0000:03:00.0: setting latency timer to 64
[    6.941547] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    6.941551] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[    6.966594] ath: EEPROM regdomain: 0x65
[    6.966596] ath: EEPROM indicates we should expect a direct regpair map
[    6.966598] ath: Country alpha2 being used: 00
[    6.966599] ath: Regpair used: 0x65
[    6.993518] [drm] radeon kernel modesetting enabled.
[    6.993532] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    6.993563] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[    6.993571] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.993575] radeon 0000:01:00.0: setting latency timer to 64
[    7.046841] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    7.047278] Registered led device: ath9k-phy0::radio
[    7.047299] Registered led device: ath9k-phy0::assoc
[    7.047325] Registered led device: ath9k-phy0::tx
[    7.047348] Registered led device: ath9k-phy0::rx
[    7.047355] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xf8660000, irq=17
[    7.072076] Console: switching to colour frame buffer device 170x48
[    7.075122] fb0: inteldrmfb frame buffer device
[    7.075124] drm: registered panic notifier
[    7.095255] acpi device:02: registered as cooling_device4
[    7.095593] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    7.095686] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.095708] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    7.096173] acpi device:0b: registered as cooling_device5
[    7.096382] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input10
[    7.096428] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    7.096437] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    7.096614] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    7.097473] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1).
[    7.097532] [drm] register mmio base: 0xDC400000
[    7.097534] [drm] register mmio size: 131072
[    7.097536] vga_switcheroo: enabled
[    7.097600] radeon atpx: version is 1
[    7.110993] HDA Intel 0000:00:1b.0: BAR 0: set to [mem 0xdc500000-0xdc503fff 64bit] (PCI address [0xdc500000-0xdc503fff])
[    7.111009] HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    7.111034] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    7.111115] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    7.111149] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.162534] hda_codec: ALC271X: BIOS auto-probing.
[    7.163759] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[    7.165631] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    7.165680] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    8.252448] ATOM BIOS: Acer
[    8.252488] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    8.252494] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    8.252504] mtrr: no more MTRRs available
[    8.252507] [drm] Detected VRAM RAM=1024M, BAR=128M
[    8.252509] [drm] RAM width 128bits DDR
[    8.252664] [TTM] Zone  kernel: Available graphics memory: 439998 kiB.
[    8.252667] [TTM] Zone highmem: Available graphics memory: 1455338 kiB.
[    8.252670] [TTM] Initializing pool allocator.
[    8.252694] [drm] radeon: 1024M of VRAM memory ready
[    8.252696] [drm] radeon: 512M of GTT memory ready.
[    8.252712] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    8.252715] [drm] Driver supports precise vblank timestamp query.
[    8.252755] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[    8.252761] radeon 0000:01:00.0: radeon: using MSI.
[    8.252803] [drm] radeon: irq initialized.
[    8.252807] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    8.253313] [drm] Loading REDWOOD Microcode
[    8.327302] r600_cp: Failed to load firmware "radeon/REDWOOD_pfp.bin"
[    8.327351] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[    8.327396] radeon 0000:01:00.0: disabling GPU acceleration
[    8.328456] radeon 0000:01:00.0: f478b800 unpin not necessary
[    8.328458] radeon 0000:01:00.0: f478b800 unpin not necessary
[    8.328965] [drm] Radeon Display Connectors
[    8.328967] [drm] Connector 0:
[    8.328968] [drm]   LVDS
[    8.328971] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[    8.328972] [drm]   Encoders:
[    8.328974] [drm]     LCD1: INTERNAL_UNIPHY
[    8.328975] [drm] Connector 1:
[    8.328976] [drm]   HDMI-A
[    8.328977] [drm]   HPD1
[    8.328980] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    8.328981] [drm]   Encoders:
[    8.328982] [drm]     DFP1: INTERNAL_UNIPHY1
[    8.328984] [drm] Connector 2:
[    8.328985] [drm]   VGA
[    8.328987] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    8.328988] [drm]   Encoders:
[    8.328990] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    8.743179] [drm] Internal thermal controller with fan control
[    8.743256] [drm] radeon: power management initialized
[    9.488320] [drm] fb mappable at 0xD0040000
[    9.488323] [drm] vram apper at 0xD0000000
[    9.488326] [drm] size 4325376
[    9.488328] [drm] fb depth is 24
[    9.488331] [drm]    pitch is 5632
[    9.488436] fb1: radeondrmfb frame buffer device
[    9.488444] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 1
[    9.488504] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.488593] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[    9.488620] HDA Intel 0000:01:00.1: setting latency timer to 64
[   10.416267] Adding 12286972k swap on /dev/sda5.  Priority:-1 extents:1 across:12286972k
[   10.419514] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.786425] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.912618] loop: module loaded
[   11.461665] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   12.234349] fuse init (API version 7.16)
[   16.703294] Bluetooth: Core ver 2.15
[   16.703323] NET: Registered protocol family 31
[   16.703325] Bluetooth: HCI device and connection manager initialized
[   16.703329] Bluetooth: HCI socket layer initialized
[   16.719722] Bluetooth: L2CAP ver 2.15
[   16.719724] Bluetooth: L2CAP socket layer initialized
[   16.724146] Bluetooth: RFCOMM TTY layer initialized
[   16.724149] Bluetooth: RFCOMM socket layer initialized
[   16.724151] Bluetooth: RFCOMM ver 1.11
[   16.885781] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.885783] Bluetooth: BNEP filters: protocol multicast
[   16.894086] Bluetooth: SCO (Voice Link) ver 0.6
[   16.894088] Bluetooth: SCO socket layer initialized
[   17.890778] lp: driver loaded but no devices found
[   17.956470] ppdev: user-space parallel port driver
[   24.354295] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   30.633361] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[   30.716666] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.211911] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   36.374929] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[   36.459272] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   36.950231] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   41.251928] wlan0: authenticate with 06:13:92:20:5a:f7 (try 1)
[   41.253782] wlan0: authenticated
[   41.253799] wlan0: associate with 06:13:92:20:5a:f7 (try 1)
[   41.256699] wlan0: RX AssocResp from 06:13:92:20:5a:f7 (capab=0x431 status=0 aid=1)
[   41.256702] wlan0: associated
[   41.256956] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   41.448347] padlock_aes: VIA PadLock not detected.
[   43.229792] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   45.554998] EXT4-fs (sda3): re-mounted. Opts: commit=0
[   51.902807] wlan0: no IPv6 routers present


The errors I get are:
[ 8.327302] r600_cp: Failed to load firmware "radeon/REDWOOD_pfp.bin"
[ 8.327351] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[ 8.327396] radeon 0000:01:00.0: disabling GPU acceleration
[ 8.328456] radeon 0000:01:00.0: f478b800 unpin not necessary
[ 8.328458] radeon 0000:01:00.0: f478b800 unpin not necessary

I'm currently getting 2.5-3 hours of battery life, but it is my belief that I by switching to the integrated card I should be able to get much longer. I'm at a loss because the switching doesn't seem to work whether I do:

echo DIGD > /sys/kernel/debug/vgaswitcheroo/switch
or
echo DDIS > /sys/kernel/debug/vgaswitcheroo/switch
or
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch

When I do echo DIGD > /sys/kernel/debug/vgaswitcheroo/switch and then log out, the command prompt say switching off i915, then just hangs.

Here is my /etc/default/grub also:

Code: Select all
(~)$ cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet radeon.modeset=1"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"


I hope that I provided everything, but if you need to see something else, please just ask. I really want to get switcheroo working so that I could get extended battery life. Thanks for any help you can provide!

-skipjack
Last edited by skipjack on 2011-04-17 04:05, edited 1 time in total.
skipjack
 
Posts: 3
Joined: 2011-04-12 14:11

Re: Wheezy Radeon/Intel Graphics switcheroo

Postby stevepusser » 2011-04-16 20:36

The Intel card is the integrated card, and it looks to me like you are using it. There's an error loading the firmware for the ATI card, did you get the Wheezy firmware-linux-nonfree package installed to match your kernel?
The MX Linux repositories: Backports galore! If we don't have something, just ask and we'll try--we like challenges. New packages: Foliate 1.5.3, Minitube 3.1, wine-staging 4.12, Virtual Box 5.2.32 & 6.0.10, Pale Moon 28.6.1, Waterfox 56.2.12
User avatar
stevepusser
 
Posts: 11004
Joined: 2009-10-06 05:53

Re: Wheezy Radeon/Intel Graphics switcheroo

Postby skipjack » 2011-04-17 03:47

Thanks stevepusser, I didn't have that installed... once I read your reply I remember trying to install that a couple of days ago, but something happened and I had to uninstall it. This time it worked like a charm. So, once I rebooted those errors went away...except for (full dmesg output below)

[ 267.244692] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -35!
[ 267.272248] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -35!

This happened when I booted with DIS on. The only other issue that I guess I have now, is that I can switch between the integrated card and the discreet card, but it doesn't seem to affect anything. If you see my acpi output below, my battery life doesn't change at all. It floats around ~2:50 at 100% charge. I have read in many places that the TimelineX series should be much more than 3 hours of battery life. Am I mistaken or does this seem weird to anyone? Any other settings that I'm missing?

Code: Select all
(~)$ cat /sys/kernel/debug/vgaswitcheroo/switch
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :Pwr:0000:01:00.0
(~)$ acpi -V
Battery 0: Discharging, 100%, 02:53:21 remaining
Battery 0: design capacity 6000 mAh, last full capacity 5900 mAh = 98%
Adapter 0: off-line
Thermal 0: ok, 47.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 105.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 100.0 degrees C
Cooling 0: LCD 8 of 9
Cooling 1: LCD 8 of 9
Cooling 2: Processor 0 of 10
Cooling 3: Processor 0 of 10
Cooling 4: Processor 0 of 10
Cooling 5: Processor 0 of 10


Code: Select all
(~)$ cat /sys/kernel/debug/vgaswitcheroo/switch
0:IGD: :Off:0000:00:02.0
1:DIS:+:Pwr:0000:01:00.0
(~)$ acpi -V
Battery 0: Discharging, 95%, 02:44:00 remaining
Battery 0: design capacity 6000 mAh, last full capacity 5900 mAh = 98%
Adapter 0: off-line
Thermal 0: ok, 47.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 105.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 100.0 degrees C
Cooling 0: LCD 8 of 9
Cooling 1: LCD 8 of 9
Cooling 2: Processor 0 of 10
Cooling 3: Processor 0 of 10
Cooling 4: Processor 0 of 10
Cooling 5: Processor 0 of 10



Here is my dmesg output again:

Code: Select all
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-2-686 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 05:24:21 UTC 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[    0.000000]  BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000b3675000 (usable)
[    0.000000]  BIOS-e820: 00000000b3675000 - 00000000b36bf000 (reserved)
[    0.000000]  BIOS-e820: 00000000b36bf000 - 00000000b373b000 (usable)
[    0.000000]  BIOS-e820: 00000000b373b000 - 00000000b37bf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000b37bf000 - 00000000b37e1000 (usable)
[    0.000000]  BIOS-e820: 00000000b37e1000 - 00000000b37ff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000b37ff000 - 00000000b3800000 (usable)
[    0.000000]  BIOS-e820: 00000000b3800000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Acer Aspire 4820TG/JM41_CP, BIOS V1.25 03/16/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0xb3800 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0B8000000 mask FF8000000 uncachable
[    0.000000]   4 base 0B4000000 mask FFC000000 uncachable
[    0.000000]   5 base 0B3800000 mask FFF800000 uncachable
[    0.000000]   6 base 100000000 mask FC0000000 write-back
[    0.000000]   7 base 138000000 mask FF8000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[    0.000000] RAMDISK: 37713000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 36e36000 - 377129b3
[    0.000000] Move RAMDISK from 0000000037713000 - 0000000037fef9b2 to 36e36000 - 377129b2
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT b37fe120 0007C (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP b37fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT b37ed000 0BE66 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS b375f000 00040
[    0.000000] ACPI: ASF! b37fd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: HPET b37fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC b37fa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG b37f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC b37ec000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT b37e9000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: ASPT b37e5000 00034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: WDAT b37e4000 00224 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SSDT b37e3000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT b37e1000 01F58 (v01 AmdRef  AmdTabl 00001000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1984MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000b3800
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000b3675
[    0.000000]     0: 0x000b36bf -> 0x000b373b
[    0.000000]     0: 0x000b37bf -> 0x000b37e1
[    0.000000]     0: 0x000b37ff -> 0x000b3800
[    0.000000] On node 0 totalpages: 734881
[    0.000000] free_area_init_node: node 0, pgdat c13ea5c0, node_mem_map f57c6200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 3969 pages used for memmap
[    0.000000]   HighMem zone: 503701 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f5000000 s27136 r0 d22016 u524288
[    0.000000] pcpu-alloc: s27136 r0 d22016 u524288 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 729136
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=5fc2201d-175f-405f-bd99-f613617c2dd5 ro quiet radeon.modeset=1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:000b3800)
[    0.000000] Memory: 2901208k/2940928k available (2646k kernel code, 38316k reserved, 1389k data, 392k init, 2030680k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc13f1000 - 0xc1453000   ( 392 kB)
[    0.000000]       .data : 0xc1295864 - 0xc13f0e80   (1389 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1295864   (2646 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]    RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:1280
[    0.000000] CPU 0 irqstacks, hard=f4c0c000 soft=f4c0e000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2660.169 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.33 BogoMIPS (lpj=10640676)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000069] Security Framework initialized
[    0.000072] SELinux:  Disabled at boot.
[    0.000093] Mount-cache hash table entries: 512
[    0.000330] Initializing cgroup subsys ns
[    0.000332] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.000334] Initializing cgroup subsys cpuacct
[    0.000361] Initializing cgroup subsys devices
[    0.000362] Initializing cgroup subsys freezer
[    0.000363] Initializing cgroup subsys net_cls
[    0.000365] Initializing cgroup subsys blkio
[    0.000397] CPU: Physical Processor ID: 0
[    0.000398] CPU: Processor Core ID: 0
[    0.000402] mce: CPU supports 9 MCE banks
[    0.000411] CPU0: Thermal monitoring enabled (TM1)
[    0.000417] using mwait in idle threads.
[    0.001381] ACPI: Core revision 20110112
[    0.028613] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.029005] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068592] CPU0: Intel(R) Core(TM) i5 CPU       M 480  @ 2.67GHz stepping 05
[    0.174821] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.174826] ... version:                3
[    0.174827] ... bit width:              48
[    0.174828] ... generic registers:      4
[    0.174829] ... value mask:             0000ffffffffffff
[    0.174830] ... max period:             000000007fffffff
[    0.174831] ... fixed-purpose events:   3
[    0.174832] ... event mask:             000000070000000f
[    0.175051] NMI watchdog enabled, takes one hw-pmu counter.
[    0.175107] CPU 1 irqstacks, hard=f4d24000 soft=f4d26000
[    0.175110] Booting Node   0, Processors  #1
[    0.185447] Initializing CPU#1
[    0.282676] NMI watchdog enabled, takes one hw-pmu counter.
[    0.282752] CPU 2 irqstacks, hard=f4d52000 soft=f4d54000
[    0.282755]  #2
[    0.292880] Initializing CPU#2
[    0.390434] NMI watchdog enabled, takes one hw-pmu counter.
[    0.390504] CPU 3 irqstacks, hard=f4d60000 soft=f4d62000
[    0.390507]  #3
[    0.400631] Initializing CPU#3
[    0.498179] NMI watchdog enabled, takes one hw-pmu counter.
[    0.498211] Brought up 4 CPUs
[    0.498212] Total of 4 processors activated (21282.84 BogoMIPS).
[    0.499897] devtmpfs: initialized
[    0.500181] print_constraints: dummy:
[    0.500236] NET: Registered protocol family 16
[    0.500295] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.500297] ACPI: bus type pci registered
[    0.500401] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.500404] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.500405] PCI: Using MMCONFIG for extended config space
[    0.500406] PCI: Using configuration type 1 for base access
[    0.500719] bio: create slab <bio-0> at 0
[    0.502098] ACPI: EC: Look up EC in DSDT
[    0.503300] ACPI: Executed 1 blocks of module-level executable AML code
[    0.526028] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.550331] ACPI: SSDT b3691a18 00474 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.550630] ACPI: Dynamic OEM Table Load:
[    0.550632] ACPI: SSDT   (null) 00474 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.550759] ACPI: SSDT b368f018 008E0 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.551041] ACPI: Dynamic OEM Table Load:
[    0.551043] ACPI: SSDT   (null) 008E0 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.574160] ACPI: SSDT b3690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.574495] ACPI: Dynamic OEM Table Load:
[    0.574497] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.586014] ACPI: SSDT b368ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.586317] ACPI: Dynamic OEM Table Load:
[    0.586319] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.598407] ACPI: Interpreter enabled
[    0.598410] ACPI: (supports S0 S3 S4 S5)
[    0.598433] ACPI: Using IOAPIC for interrupt routing
[    0.611515] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.611641] ACPI: No dock devices found.
[    0.611643] HEST: Table not found.
[    0.611645] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.611931] \_SB_.PCI0:_OSC invalid UUID
[    0.611932] _OSC request data:1 8 1f
[    0.611935] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.612425] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.612427] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.612429] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.612432] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff]
[    0.612441] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    0.612456] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.612471] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[    0.612492] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.612495] pci 0000:00:01.0: PME# disabled
[    0.612505] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[    0.612514] pci 0000:00:02.0: reg 10: [mem 0xd8000000-0xd83fffff 64bit]
[    0.612520] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.612524] pci 0000:00:02.0: reg 20: [io  0x4050-0x4057]
[    0.612578] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    0.612607] pci 0000:00:16.0: reg 10: [mem 0xdc506100-0xdc50610f 64bit]
[    0.612681] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.612686] pci 0000:00:16.0: PME# disabled
[    0.612724] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    0.613124] pci 0000:00:1a.0: reg 10: [mem 0xdc505c00-0xdc505fff]
[    0.615408] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.615413] pci 0000:00:1a.0: PME# disabled
[    0.615442] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    0.615462] pci 0000:00:1b.0: reg 10: [mem 0xdc500000-0xdc503fff 64bit]
[    0.615536] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.615541] pci 0000:00:1b.0: PME# disabled
[    0.615567] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.615643] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.615647] pci 0000:00:1c.0: PME# disabled
[    0.615679] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[    0.615756] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.615760] pci 0000:00:1c.5: PME# disabled
[    0.615795] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    0.616186] pci 0000:00:1d.0: reg 10: [mem 0xdc505800-0xdc505bff]
[    0.618480] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.618484] pci 0000:00:1d.0: PME# disabled
[    0.618508] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.618582] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    0.618698] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    0.618724] pci 0000:00:1f.2: reg 10: [io  0x4048-0x404f]
[    0.618734] pci 0000:00:1f.2: reg 14: [io  0x405c-0x405f]
[    0.618745] pci 0000:00:1f.2: reg 18: [io  0x4040-0x4047]
[    0.618755] pci 0000:00:1f.2: reg 1c: [io  0x4058-0x405b]
[    0.618766] pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
[    0.618776] pci 0000:00:1f.2: reg 24: [mem 0xdc505000-0xdc5057ff]
[    0.618822] pci 0000:00:1f.2: PME# supported from D3hot
[    0.618826] pci 0000:00:1f.2: PME# disabled
[    0.618848] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.618868] pci 0000:00:1f.3: reg 10: [mem 0xdc506000-0xdc5060ff 64bit]
[    0.618897] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    0.618941] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    0.618968] pci 0000:00:1f.6: reg 10: [mem 0xdc504000-0xdc504fff 64bit]
[    0.619073] pci 0000:01:00.0: [1002:68c1] type 0 class 0x000300
[    0.619085] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.619094] pci 0000:01:00.0: reg 18: [mem 0xdc400000-0xdc41ffff 64bit]
[    0.619100] pci 0000:01:00.0: reg 20: [io  0x3000-0x30ff]
[    0.619111] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    0.619127] pci 0000:01:00.0: supports D1 D2
[    0.619144] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
[    0.619156] pci 0000:01:00.1: reg 10: [mem 0xdc420000-0xdc423fff 64bit]
[    0.619194] pci 0000:01:00.1: supports D1 D2
[    0.619213] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.619215] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.619217] pci 0000:00:01.0:   bridge window [mem 0xdc400000-0xdc4fffff]
[    0.619220] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.619295] pci 0000:02:00.0: [1969:1073] type 0 class 0x000200
[    0.619323] pci 0000:02:00.0: reg 10: [mem 0xdb400000-0xdb43ffff 64bit]
[    0.619338] pci 0000:02:00.0: reg 18: [io  0x2000-0x207f]
[    0.619439] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.619444] pci 0000:02:00.0: PME# disabled
[    0.619485] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.619489] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.619494] pci 0000:00:1c.0:   bridge window [mem 0xdb400000-0xdc3fffff]
[    0.619501] pci 0000:00:1c.0:   bridge window [mem 0xd8400000-0xd93fffff 64bit pref]
[    0.619570] pci 0000:03:00.0: [168c:002e] type 0 class 0x000280
[    0.619593] pci 0000:03:00.0: reg 10: [mem 0xda400000-0xda40ffff 64bit]
[    0.619676] pci 0000:03:00.0: supports D1
[    0.619677] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.619682] pci 0000:03:00.0: PME# disabled
[    0.619712] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[    0.619716] pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
[    0.619720] pci 0000:00:1c.5:   bridge window [mem 0xda400000-0xdb3fffff]
[    0.619727] pci 0000:00:1c.5:   bridge window [mem 0xd9400000-0xda3fffff 64bit pref]
[    0.619797] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.619802] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.619806] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.619814] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.619816] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.619818] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.619819] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.619821] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[    0.619841] pci_bus 0000:00: on NUMA node 0
[    0.619844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.619973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.620016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.620067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.620141] \_SB_.PCI0:_OSC invalid UUID
[    0.620142] _OSC request data:1 1f 1f
[    0.620146]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.620171] \_SB_.PCI0:_OSC invalid UUID
[    0.620172] _OSC request data:1 0 1d
[    0.623296] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
[    0.623346] pci 0000:7f:00.0: [8086:2c62] type 0 class 0x000600
[    0.623362] pci 0000:7f:00.1: [8086:2d01] type 0 class 0x000600
[    0.623377] pci 0000:7f:02.0: [8086:2d10] type 0 class 0x000600
[    0.623391] pci 0000:7f:02.1: [8086:2d11] type 0 class 0x000600
[    0.623404] pci 0000:7f:02.2: [8086:2d12] type 0 class 0x000600
[    0.623418] pci 0000:7f:02.3: [8086:2d13] type 0 class 0x000600
[    0.623439] pci_bus 0000:7f: on NUMA node 0
[    0.623444]  pci0000:7f: Requesting ACPI _OSC control (0x1d)
[    0.623622] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.623657] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.623690] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.623723] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.623756] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.623790] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.623823] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.623856] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.623911] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.623917] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.623921] vgaarb: loaded
[    0.623945] PCI: Using ACPI for IRQ routing
[    0.623947] PCI: pci_cache_line_size set to 64 bytes
[    0.624010] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[    0.624012] reserve RAM buffer: 00000000b3675000 - 00000000b3ffffff
[    0.624014] reserve RAM buffer: 00000000b373b000 - 00000000b3ffffff
[    0.624016] reserve RAM buffer: 00000000b37e1000 - 00000000b3ffffff
[    0.624018] reserve RAM buffer: 00000000b3800000 - 00000000b3ffffff
[    0.624109] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.624114] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.626130] Switching to clocksource hpet
[    0.626968] pnp: PnP ACPI init
[    0.626979] ACPI: bus type pnp registered
[    0.627228] pnp 00:00: [bus 00-7e]
[    0.627230] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.627233] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.627234] pnp 00:00: [io  0x0d00-0xffff window]
[    0.627236] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.627237] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.627239] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.627240] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.627242] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.627243] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.627245] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.627246] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.627248] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.627249] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.627251] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.627252] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.627254] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.627255] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.627257] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
[    0.627258] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.627297] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.627349] pnp 00:01: [io  0x0000-0x001f]
[    0.627351] pnp 00:01: [io  0x0081-0x0091]
[    0.627352] pnp 00:01: [io  0x0093-0x009f]
[    0.627354] pnp 00:01: [io  0x00c0-0x00df]
[    0.627355] pnp 00:01: [dma 4]
[    0.627377] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.627382] pnp 00:02: [mem 0xff000000-0xffffffff]
[    0.627402] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.627463] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.627485] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.627492] pnp 00:04: [io  0x00f0]
[    0.627498] pnp 00:04: [irq 13]
[    0.627521] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.627528] pnp 00:05: [io  0x002e-0x002f]
[    0.627529] pnp 00:05: [io  0x004e-0x004f]
[    0.627531] pnp 00:05: [io  0x0061]
[    0.627532] pnp 00:05: [io  0x0063]
[    0.627533] pnp 00:05: [io  0x0065]
[    0.627534] pnp 00:05: [io  0x0067]
[    0.627535] pnp 00:05: [io  0x0070]
[    0.627536] pnp 00:05: [io  0x0080]
[    0.627537] pnp 00:05: [io  0x0092]
[    0.627539] pnp 00:05: [io  0x00b2-0x00b3]
[    0.627540] pnp 00:05: [io  0x0680-0x069f]
[    0.627541] pnp 00:05: [io  0x0800-0x080f]
[    0.627542] pnp 00:05: [io  0xffff]
[    0.627544] pnp 00:05: [io  0xffff]
[    0.627545] pnp 00:05: [io  0x0400-0x047f]
[    0.627546] pnp 00:05: [io  0x0500-0x057f]
[    0.627547] pnp 00:05: [io  0x164e-0x164f]
[    0.627556] pnp 00:05: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 13 [io  0x1000-0x1fff]
[    0.627588] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.627590] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.627591] system 00:05: [io  0xffff] has been reserved
[    0.627593] system 00:05: [io  0xffff] has been reserved
[    0.627595] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.627597] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.627599] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.627605] pnp 00:06: [io  0x0070-0x0077]
[    0.627609] pnp 00:06: [irq 8]
[    0.627630] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.627637] pnp 00:07: [io  0x0060]
[    0.627638] pnp 00:07: [io  0x0064]
[    0.627642] pnp 00:07: [irq 1]
[    0.627664] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.627673] pnp 00:08: [irq 12]
[    0.627695] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active)
[    0.627910] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.627912] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[    0.627913] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    0.627914] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    0.627916] pnp 00:09: [mem 0xf0000000-0xf1ffffff]
[    0.627917] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    0.627919] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[    0.627920] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[    0.627921] pnp 00:09: [mem 0xff000000-0xffffffff]
[    0.627923] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    0.627924] pnp 00:09: [mem 0xdc600000-0xdc600fff]
[    0.627971] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.627973] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.627975] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.627977] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.627979] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
[    0.627981] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.627983] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.627985] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.627987] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.627989] system 00:09: [mem 0xdc600000-0xdc600fff] has been reserved
[    0.627991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.628094] pnp 00:0a: [bus 7f]
[    0.628127] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.628138] pnp: PnP ACPI: found 11 devices
[    0.628139] ACPI: ACPI bus type pnp unregistered
[    0.628141] PnPBIOS: Disabled by ACPI PNP
[    0.629763] Switched to NOHz mode on CPU #0
[    0.629857] Switched to NOHz mode on CPU #1
[    0.629866] Switched to NOHz mode on CPU #3
[    0.629874] Switched to NOHz mode on CPU #2
[    0.663849] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.663884] pci 0000:01:00.0: BAR 6: assigned [mem 0xdc440000-0xdc45ffff pref]
[    0.663886] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.663888] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.663891] pci 0000:00:01.0:   bridge window [mem 0xdc400000-0xdc4fffff]
[    0.663893] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.663897] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.663900] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.663905] pci 0000:00:1c.0:   bridge window [mem 0xdb400000-0xdc3fffff]
[    0.663910] pci 0000:00:1c.0:   bridge window [mem 0xd8400000-0xd93fffff 64bit pref]
[    0.663917] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[    0.663920] pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
[    0.663926] pci 0000:00:1c.5:   bridge window [mem 0xda400000-0xdb3fffff]
[    0.663930] pci 0000:00:1c.5:   bridge window [mem 0xd9400000-0xda3fffff 64bit pref]
[    0.663937] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.663939] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.663944] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.663948] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.663962] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.663964] pci 0000:00:01.0: setting latency timer to 64
[    0.663972] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.663976] pci 0000:00:1c.0: setting latency timer to 64
[    0.663982] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.663987] pci 0000:00:1c.5: setting latency timer to 64
[    0.663993] pci 0000:00:1e.0: setting latency timer to 64
[    0.663997] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.663999] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.664000] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.664002] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[    0.664004] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.664005] pci_bus 0000:01: resource 1 [mem 0xdc400000-0xdc4fffff]
[    0.664007] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.664009] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.664010] pci_bus 0000:02: resource 1 [mem 0xdb400000-0xdc3fffff]
[    0.664012] pci_bus 0000:02: resource 2 [mem 0xd8400000-0xd93fffff 64bit pref]
[    0.664014] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.664015] pci_bus 0000:03: resource 1 [mem 0xda400000-0xdb3fffff]
[    0.664017] pci_bus 0000:03: resource 2 [mem 0xd9400000-0xda3fffff 64bit pref]
[    0.664019] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.664020] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.664022] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.664023] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfeafffff]
[    0.664065] NET: Registered protocol family 2
[    0.664125] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.664258] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.664480] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.664603] TCP: Hash tables configured (established 131072 bind 65536)
[    0.664605] TCP reno registered
[    0.664607] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.664613] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.664766] NET: Registered protocol family 1
[    0.664778] pci 0000:00:02.0: Boot video device
[    0.694019] PCI: CLS 64 bytes, default 64
[    0.694075] Unpacking initramfs...
[    0.873078] Freeing initrd memory: 9076k freed
[    0.875020] Simple Boot Flag at 0x44 set to 0x1
[    0.875389] audit: initializing netlink socket (disabled)
[    0.875399] type=2000 audit(1303011220.704:1): initialized
[    0.881729] highmem bounce pool size: 64 pages
[    0.881733] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.883080] VFS: Disk quotas dquot_6.5.2
[    0.883167] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.883268] msgmni has been set to 1717
[    0.883433] alg: No test for stdrng (krng)
[    0.883487] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.883489] io scheduler noop registered
[    0.883491] io scheduler deadline registered
[    0.883498] io scheduler cfq registered (default)
[    0.883559] pcieport 0000:00:01.0: setting latency timer to 64
[    0.883580] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.883789] ERST: Table is not found!
[    0.883800] isapnp: Scanning for PnP cards...
[    1.237062] isapnp: No Plug & Play device found
[    1.237114] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.237619] Linux agpgart interface v0.103
[    1.237700] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    1.237768] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.238529] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[    1.238657] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.238774] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.245556] i8042: Detected active multiplexing controller, rev 1.1
[    1.249187] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.249197] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.249207] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.249209] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.249211] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.249356] mousedev: PS/2 mouse device common for all mice
[    1.249397] rtc_cmos 00:06: RTC can wake from S4
[    1.249451] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.249479] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.249486] cpuidle: using governor ladder
[    1.249487] cpuidle: using governor menu
[    1.249658] TCP cubic registered
[    1.249758] NET: Registered protocol family 10
[    1.250189] Mobile IPv6
[    1.250191] NET: Registered protocol family 17
[    1.250194] Registering the dns_resolver key type
[    1.250208] Using IPI No-Shortcut mode
[    1.250268] PM: Hibernation image not present or could not be loaded.
[    1.250276] registered taskstats version 1
[    1.250680] rtc_cmos 00:06: setting system clock to 2011-04-17 03:33:41 UTC (1303011221)
[    1.250711] Initalizing network drop monitor service
[    1.250762] Freeing unused kernel memory: 392k freed
[    1.250856] Write protecting the kernel text: 2648k
[    1.250874] Write protecting the kernel read-only data: 1000k
[    1.261495] <30>udev[59]: starting version 167
[    1.270676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.303411] thermal LNXTHERM:00: registered as thermal_zone0
[    1.303414] ACPI: Thermal Zone [THRM] (62 C)
[    1.311215] atl1c 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.311228] atl1c 0000:02:00.0: setting latency timer to 64
[    1.328860] usbcore: registered new interface driver usbfs
[    1.328888] usbcore: registered new interface driver hub
[    1.328929] usbcore: registered new device driver usb
[    1.329335] SCSI subsystem initialized
[    1.331064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.331094] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.331113] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.331117] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.331153] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.345494] libata version 3.00 loaded.
[    1.356481] ehci_hcd 0000:00:1a.0: debug port 2
[    1.360374] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.360389] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdc505c00
[    1.372402] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.372430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.372435] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.372439] usb usb1: Product: EHCI Host Controller
[    1.372442] usb usb1: Manufacturer: Linux 2.6.38-2-686 ehci_hcd
[    1.372445] usb usb1: SerialNumber: 0000:00:1a.0
[    1.372564] hub 1-0:1.0: USB hub found
[    1.372568] hub 1-0:1.0: 3 ports detected
[    1.372634] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.372645] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.372648] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.372653] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.408351] ehci_hcd 0000:00:1d.0: debug port 2
[    1.412224] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.412236] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdc505800
[    1.424276] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.424313] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.424317] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.424321] usb usb2: Product: EHCI Host Controller
[    1.424325] usb usb2: Manufacturer: Linux 2.6.38-2-686 ehci_hcd
[    1.424328] usb usb2: SerialNumber: 0000:00:1d.0
[    1.424427] hub 2-0:1.0: USB hub found
[    1.424430] hub 2-0:1.0: 3 ports detected
[    1.424483] ahci 0000:00:1f.2: version 3.0
[    1.424500] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.424542] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.424580] ahci: SSS flag set, parallel bus scan disabled
[    1.424619] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.424622] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[    1.424628] ahci 0000:00:1f.2: setting latency timer to 64
[    1.432740] scsi0 : ahci
[    1.432838] scsi1 : ahci
[    1.432908] scsi2 : ahci
[    1.432981] scsi3 : ahci
[    1.433061] ata1: SATA max UDMA/133 abar m2048@0xdc505000 port 0xdc505100 irq 41
[    1.433064] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 41
[    1.433066] ata3: DUMMY
[    1.433067] ata4: DUMMY
[    1.436882] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
[    1.683675] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.751523] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.801629] ata1.00: ATA-8: TOSHIBA MK6465GSX, GJ002J, max UDMA/100
[    1.801634] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.802444] ata1.00: configured for UDMA/100
[    1.802591] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6465GS GJ00 PQ: 0 ANSI: 5
[    1.815765] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.815771] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.816038] hub 1-1:1.0: USB hub found
[    1.816126] hub 1-1:1.0: 6 ports detected
[    1.871234] Refined TSC clocksource calibration: 2660.459 MHz.
[    1.871240] Switching to clocksource tsc
[    1.927094] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    2.059194] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.059199] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.059458] hub 2-1:1.0: USB hub found
[    2.059559] hub 2-1:1.0: 8 ports detected
[    2.130785] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
[    2.328692] usb 1-1.1: New USB device found, idVendor=0402, idProduct=9665
[    2.328698] usb 1-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    2.328703] usb 1-1.1: Product: 1.3M WebCam
[    2.328706] usb 1-1.1: Manufacturer: XPAAE03EW
[    2.521720] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.525793] ata2.00: ATAPI: HL-DT-ST DVDRAM GU10N, AP04, max UDMA/133
[    2.530658] ata2.00: configured for UDMA/133
[    2.536157] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU10N     AP04 PQ: 0 ANSI: 5
[    2.544137] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    2.544190] sd 0:0:0:0: [sda] Write Protect is off
[    2.544193] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.544212] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.548594] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.548600] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.548753] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.646494]  sda: sda1 sda2 < sda5 > sda3
[    2.646809] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.650140] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.650167] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.206726] PM: Starting manual resume from disk
[    3.206729] PM: Hibernation image partition 8:5 present
[    3.206730] PM: Looking for hibernation image.
[    3.234160] PM: Image not found (code -22)
[    3.234163] PM: Hibernation image not present or could not be loaded.
[    3.358889] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.137808] <30>udev[399]: starting version 167
[    5.745119] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input1
[    5.745167] ACPI: Power Button [PWRB]
[    5.745221] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input2
[    5.745306] ACPI: Lid Switch [LID0]
[    5.745355] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input3
[    5.745387] ACPI: Sleep Button [SLPB]
[    5.745435] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    5.745465] ACPI: Power Button [PWRF]
[    5.753037] ACPI: acpi_idle registered with cpuidle
[    5.755100] Monitor-Mwait will be used to enter C-1 state
[    5.755115] Monitor-Mwait will be used to enter C-3 state
[    5.780929] wmi: Mapper loaded
[    5.869488] cfg80211: Calling CRDA to update world regulatory domain
[    5.896187] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    6.296104] [drm] Initialized drm 1.1.0 20060810
[    6.366231] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000
[    6.396870] ACPI: AC Adapter [ACAD] (on-line)
[    6.397863] ACPI: Battery Slot [BAT1] (battery present)
[    6.411892] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
[    6.444980] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    6.444985] ACPI: resource 0000:00:1f.3 [io  0x4000-0x401f] conflicts with ACPI region SMBI [io 0x4000-0x400f]
[    6.444986] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.630078] acer-wmi: Acer Laptop ACPI-WMI Extras
[    6.630328] acer-wmi: Function bitmap for Communication Button: 0x1
[    6.630431] acer-wmi: Brightness must be controlled by generic video driver
[    6.630841] input: Acer WMI hotkeys as /devices/virtual/input/input7
[    6.656985] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    6.656997] ath9k 0000:03:00.0: setting latency timer to 64
[    6.746779] ath: EEPROM regdomain: 0x65
[    6.746781] ath: EEPROM indicates we should expect a direct regpair map
[    6.746783] ath: Country alpha2 being used: 00
[    6.746784] ath: Regpair used: 0x65
[    6.842188] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.842193] i915 0000:00:02.0: setting latency timer to 64
[    6.848676] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    6.849254] Registered led device: ath9k-phy0::radio
[    6.849277] Registered led device: ath9k-phy0::assoc
[    6.849302] Registered led device: ath9k-phy0::tx
[    6.849326] Registered led device: ath9k-phy0::rx
[    6.849333] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xf8500000, irq=17
[    6.857848] mtrr: no more MTRRs available
[    6.857851] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    6.858120] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[    6.858124] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.858125] [drm] Driver supports precise vblank timestamp query.
[    6.987809] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    6.987811] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[    7.038924] [drm] radeon kernel modesetting enabled.
[    7.038939] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    7.038971] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[    7.038979] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.038983] radeon 0000:01:00.0: setting latency timer to 64
[    7.115979] Console: switching to colour frame buffer device 170x48
[    7.119003] fb0: inteldrmfb frame buffer device
[    7.119004] drm: registered panic notifier
[    7.127286] acpi device:02: registered as cooling_device4
[    7.127451] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    7.127505] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.127526] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    7.127995] acpi device:0b: registered as cooling_device5
[    7.128206] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input9
[    7.128239] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    7.128249] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    7.128361] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    7.130566] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1).
[    7.130625] [drm] register mmio base: 0xDC400000
[    7.130627] [drm] register mmio size: 131072
[    7.130629] vga_switcheroo: enabled
[    7.130701] radeon atpx: version is 1
[    7.268321] Linux video capture interface: v2.00
[    7.274492] uvcvideo: Found UVC 1.00 device 1.3M WebCam (0402:9665)
[    7.277040] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input10
[    7.277086] usbcore: registered new interface driver uvcvideo
[    7.277087] USB Video Class driver (v1.0.0)
[    7.490190] HDA Intel 0000:00:1b.0: BAR 0: set to [mem 0xdc500000-0xdc503fff 64bit] (PCI address [0xdc500000-0xdc503fff])
[    7.490199] HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    7.490215] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    7.490285] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    7.490321] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.595695] hda_codec: ALC271X: BIOS auto-probing.
[    7.596910] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[    7.598839] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    7.598909] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    8.233155] ATOM BIOS: Acer
[    8.233192] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    8.233197] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    8.233207] mtrr: no more MTRRs available
[    8.233210] [drm] Detected VRAM RAM=1024M, BAR=128M
[    8.233212] [drm] RAM width 128bits DDR
[    8.233385] [TTM] Zone  kernel: Available graphics memory: 439998 kiB.
[    8.233389] [TTM] Zone highmem: Available graphics memory: 1455338 kiB.
[    8.233392] [TTM] Initializing pool allocator.
[    8.233417] [drm] radeon: 1024M of VRAM memory ready
[    8.233420] [drm] radeon: 512M of GTT memory ready.
[    8.233435] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    8.233438] [drm] Driver supports precise vblank timestamp query.
[    8.233477] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[    8.233484] radeon 0000:01:00.0: radeon: using MSI.
[    8.233529] [drm] radeon: irq initialized.
[    8.233533] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    8.234040] [drm] Loading REDWOOD Microcode
[    8.326256] radeon 0000:01:00.0: WB enabled
[    8.342701] [drm] ring test succeeded in 1 usecs
[    8.342811] [drm] radeon: ib pool ready.
[    8.342901] [drm] ib test succeeded in 0 usecs
[    8.343147] [drm] Radeon Display Connectors
[    8.343148] [drm] Connector 0:
[    8.343149] [drm]   LVDS
[    8.343151] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[    8.343152] [drm]   Encoders:
[    8.343153] [drm]     LCD1: INTERNAL_UNIPHY
[    8.343154] [drm] Connector 1:
[    8.343155] [drm]   HDMI-A
[    8.343156] [drm]   HPD1
[    8.343157] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    8.343158] [drm]   Encoders:
[    8.343159] [drm]     DFP1: INTERNAL_UNIPHY1
[    8.343160] [drm] Connector 2:
[    8.343161] [drm]   VGA
[    8.343162] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    8.343163] [drm]   Encoders:
[    8.343164] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    8.651422] [drm] Internal thermal controller with fan control
[    8.651459] [drm] radeon: power management initialized
[    9.268221] [drm] fb mappable at 0xD0141000
[    9.268222] [drm] vram apper at 0xD0000000
[    9.268223] [drm] size 4325376
[    9.268224] [drm] fb depth is 24
[    9.268225] [drm]    pitch is 5632
[    9.268287] fb1: radeondrmfb frame buffer device
[    9.268290] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 1
[    9.268441] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.268489] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[    9.268511] HDA Intel 0000:01:00.1: setting latency timer to 64
[   10.195936] Adding 12286972k swap on /dev/sda5.  Priority:-1 extents:1 across:12286972k
[   10.198695] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.555234] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.661119] loop: module loaded
[   11.265006] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   12.220662] fuse init (API version 7.16)
[   16.448226] Bluetooth: Core ver 2.15
[   16.448243] NET: Registered protocol family 31
[   16.448244] Bluetooth: HCI device and connection manager initialized
[   16.448246] Bluetooth: HCI socket layer initialized
[   16.645166] Bluetooth: L2CAP ver 2.15
[   16.645168] Bluetooth: L2CAP socket layer initialized
[   16.666877] Bluetooth: RFCOMM TTY layer initialized
[   16.666880] Bluetooth: RFCOMM socket layer initialized
[   16.666882] Bluetooth: RFCOMM ver 1.11
[   16.684360] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.684363] Bluetooth: BNEP filters: protocol multicast
[   16.716794] Bluetooth: SCO (Voice Link) ver 0.6
[   16.716796] Bluetooth: SCO socket layer initialized
[   17.881141] lp: driver loaded but no devices found
[   17.946916] ppdev: user-space parallel port driver
[   24.569806] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   30.634860] atl1c 0000:02:00.0: irq 46 for MSI/MSI-X
[   30.716588] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.031381] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   35.858521] atl1c 0000:02:00.0: irq 46 for MSI/MSI-X
[   35.940450] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   36.668972] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   41.787179] wlan0: authenticate with 06:13:92:20:5a:f7 (try 1)
[   41.789049] wlan0: authenticated
[   41.789071] wlan0: associate with 06:13:92:20:5a:f7 (try 1)
[   41.791988] wlan0: RX AssocResp from 06:13:92:20:5a:f7 (capab=0x431 status=0 aid=1)
[   41.791992] wlan0: associated
[   41.792164] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   42.258809] padlock_aes: VIA PadLock not detected.
[   45.390527] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   46.788857] EXT4-fs (sda3): re-mounted. Opts: commit=0
[   52.461554] wlan0: no IPv6 routers present
[   56.709206] Monitor-Mwait will be used to enter C-2 state
[   57.354572] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[   57.601121] EXT4-fs (sda3): re-mounted. Opts: commit=600
[   70.285537] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   70.441388] EXT4-fs (sda3): re-mounted. Opts: commit=0
[  133.317614] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[  133.539731] EXT4-fs (sda3): re-mounted. Opts: commit=600
[  148.440274] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[  148.443363] EXT4-fs (sda3): re-mounted. Opts: commit=0
[  244.479757] fbcon: Remapping primary device, fb1, to tty 1-63
[  244.978656] i915: switched off
[  267.244692] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -35!
[  267.272248] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -35!
[  285.100077] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[  285.373850] EXT4-fs (sda3): re-mounted. Opts: commit=600
[  313.804135] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[  313.857170] EXT4-fs (sda3): re-mounted. Opts: commit=0


Thanks for any input..

-skipjack
skipjack
 
Posts: 3
Joined: 2011-04-12 14:11

Re: Wheezy Radeon/Intel Graphics switcheroo

Postby stevepusser » 2011-04-17 03:55

I remember someone else having the same battery life troubles using Debian-based MEPIS, he finally got rid of the Timeline...not what you wanted to hear, I know. Is it dropping down to a lower CPU speed when under no load?

It may be worth the time to trawl the depths of the Ubuntu forums to see if anyone else there has a solution.
The MX Linux repositories: Backports galore! If we don't have something, just ask and we'll try--we like challenges. New packages: Foliate 1.5.3, Minitube 3.1, wine-staging 4.12, Virtual Box 5.2.32 & 6.0.10, Pale Moon 28.6.1, Waterfox 56.2.12
User avatar
stevepusser
 
Posts: 11004
Joined: 2009-10-06 05:53

Re: Wheezy Radeon/Intel Graphics switcheroo

Postby skipjack » 2011-04-17 04:03

Ok, after posting my reply, I noticed that IGD and DIS both showed PWR on... So, I logged out stopped gdm, su'd to root, switched to IGD AGAIN... exited root, started up gdm again... and now my battery life is at.. 6:19:25..

Code: Select all
(~)$ cat /sys/kernel/debug/vgaswitcheroo/switch
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :Off:0000:01:00.0


Code: Select all
(~)$ acpi -V
Battery 0: Discharging, 100%, 06:19:25 remaining
Battery 0: design capacity 6000 mAh, last full capacity 5900 mAh = 98%
Adapter 0: off-line
Thermal 0: ok, 42.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 105.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 100.0 degrees C
Cooling 0: LCD 8 of 9
Cooling 1: LCD 8 of 9
Cooling 2: Processor 0 of 10
Cooling 3: Processor 0 of 10
Cooling 4: Processor 0 of 10
Cooling 5: Processor 0 of 10


Amazing.. not sure what happened before, but it seems that installing firmware-linux-nonfree was the fix.. thanks again stevepusser for all of your help!

This is why I love GNU/Linux... problems aren't really problems.. just bumps in the road that let you learn some more about your system...

-skipjack
skipjack
 
Posts: 3
Joined: 2011-04-12 14:11

Re: [SOLVED] Wheezy Radeon/Intel Graphics switcheroo

Postby donoterase » 2011-08-28 02:57

I hear what your saying about the battery life. Most timelinex owners have been reporting the same issue. Most users are only getting about 2.5 hours from their battery, when in reality you should be able to get at least 5-6 (depending on things such as wifi, brightness etc.). I was no stranger to this issue also.

I own a 5830TG with integrated intel graphics and nvidia card. I don't use the nvidia card at all as integrated graphics can handle everything I throw at it. With that said, I found this tweak on phoronix website, and upon applying it I was able to get the rated battery life.

Image
Image

- Acer Timelinex 5830tg, core i5-2410M, Nvidia GT 520M
- Debian wheezy, kernel 3.0.0-rc5, gnome 2.30

I like Jesus, but he loves me. So it's kinda awkward.
donoterase
 
Posts: 45
Joined: 2011-02-08 12:02

Re: [SOLVED] Wheezy Radeon/Intel Graphics switcheroo

Postby sylvaticus » 2011-10-02 14:41

hello, sorry to mix the thread.. I have exactly the same graphic cards and my system (Ubuntu 11.04) suffer of random kernel panic on startup.
How can I just get rid of the ATI card? I don't need gaming, and the integrated Intel is fine.. I'm thinking to open the laptop case and physically unplug it :-(
sylvaticus
 
Posts: 1
Joined: 2011-10-02 14:36

Re: [SOLVED] Wheezy Radeon/Intel Graphics switcheroo

Postby rzr » 2011-11-01 11:47

now you'll have to figure out solution for your problem :

[ 0.620141] \_SB_.PCI0:_OSC invalid UUID



It's in my logs too :

http://rzr.online.fr/q/dmesg
User avatar
rzr
 
Posts: 45
Joined: 2006-05-30 20:39
Location: fr/35/rennes


Return to System configuration

Who is online

Users browsing this forum: No registered users and 7 guests

fashionable