Recently, I've done setup GNOME desktop to my server.
My apu is amd 4300u apu(and no external graphics ) so I need to use Linux kernel 5.8 or over.
During set up process, I bad faced up some issues, and try to fixed it. Anyway, I choose debian bullseye testing version and use unstable source to had overcame most of my issues.
Only remain issue(at this moments) is connect my debian server via xrdp, xrdp session can not recognized my integrated graphics.
When I try to connect with external monitor, It works and working smooth, but xrdp not.
My expectation is that the GNOME settings screen shows the graphic as "AMD renoir", but it shows "llvmpipe".
It seems all driver installed well, but I don't know what is the problem.
My one assumption is may be xrdp can not recognize integrated graphics, but not sure.
inxi -Fxz shows like this:
Code: Select all
System: Kernel: 5.10.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: GNOME 3.38.4
Distro: Debian GNU/Linux 11 (bullseye)
Machine: Type: Mini-pc System: ASUSTeK product: MINIPC PN50 v: 0620 serial: <filter>
Mobo: ASUSTeK model: PN50 serial: <filter> UEFI: ASUSTeK v: 0620 date: 03/18/2021
CPU: Info: Quad Core model: AMD Ryzen 3 4300U with Radeon Graphics bits: 64 type: MCP arch: Zen 2 rev: 1
L2 cache: 2 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 21560
Speed: 1397 MHz min/max: 1400/2700 MHz boost: enabled Core speeds (MHz): 1: 1397 2: 1397 3: 1397 4: 1397
Graphics: Device-1: Advanced Micro Devices [AMD/ATI] Renoir vendor: ASUSTeK driver: amdgpu v: kernel bus ID: 05:00.0
Display: x11 server: X.Org 1.20.11 driver: loaded: amdgpu resolution: 1920x1080~50Hz
OpenGL: renderer: llvmpipe (LLVM 11.0.1 256 bits) v: 4.5 Mesa 20.3.5 direct render: Yes
Audio: Device-1: Advanced Micro Devices [AMD/ATI] driver: snd_hda_intel v: kernel bus ID: 05:00.1
Device-2: Advanced Micro Devices [AMD] Raven/Raven2/FireFlight/Renoir Audio Processor driver: N/A bus ID: 05:00.5
Device-3: Advanced Micro Devices [AMD] Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 05:00.6
Sound Server: ALSA v: k5.10.0-6-amd64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK driver: r8169 v: kernel
port: fc00 bus ID: 02:00.0
IF: enp2s0f0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: f000 bus ID: 03:00.0
IF: wlp3s0 state: down mac: <filter>
Bluetooth: Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus ID: 6-3:2
Report: ID: hci0 state: up running pscan iscan bt-v: 3.0 lmp-v: 5.2 address: <filter>
Drives: Local Storage: total: 465.76 GiB used: 14.1 GiB (3.0%)
ID-1: /dev/nvme0n1 vendor: Seagate model: FireCuda 510 SSD ZP500GM30001 size: 465.76 GiB temp: 50.9 C
Partition: ID-1: / size: 455.47 GiB used: 13.95 GiB (3.1%) fs: ext4 dev: /dev/dm-0 mapped: ####--vg-root
ID-2: /boot size: 470.4 MiB used: 157.3 MiB (33.4%) fs: ext2 dev: /dev/nvme0n1p2
ID-3: /boot/efi size: 511 MiB used: 5.2 MiB (1.0%) fs: vfat dev: /dev/nvme0n1p1
Swap: ID-1: swap-1 type: partition size: 980 MiB used: 0 KiB (0.0%) dev: /dev/dm-1 mapped: ####--vg-swap_1
Sensors: System Temperatures: cpu: 44.0 C mobo: N/A gpu: amdgpu temp: 41.0 C
Fan Speeds (RPM): N/A
Info: Processes: 260 Uptime: 1h 08m Memory: 15.12 GiB used: 1.72 GiB (11.3%) Init: systemd runlevel: 5 Compilers:
gcc: 10.2.1 Packages: 2896 Shell: Bash v: 5.1.4 inxi: 3.3.01
Code: Select all
sudo hwinfo --short
cpu:
AMD Ryzen 3 4300U with Radeon Graphics, 1397 MHz
AMD Ryzen 3 4300U with Radeon Graphics, 1397 MHz
AMD Ryzen 3 4300U with Radeon Graphics, 1397 MHz
AMD Ryzen 3 4300U with Radeon Graphics, 1397 MHz
monitor:
AOC 28E850
graphics card:
ATI Renoir
sound:
ATI Audio device
AMD Family 17h (Models 10h-1fh) HD Audio Controller
storage:
AMD FCH SATA Controller [AHCI mode]
Seagate Technology PLC Non-Volatile memory controller
AMD FCH SATA Controller [AHCI mode]
network:
wlp3s0 Intel Wi-Fi 6 AX200
enp2s0f0 Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
network interface:
wlp3s0 Ethernet network interface
lo Loopback network interface
enp2s0f0 Ethernet network interface
disk:
/dev/nvme0n1 Seagate Technology PLC Disk
partition:
/dev/nvme0n1p1 Partition
/dev/nvme0n1p2 Partition
/dev/nvme0n1p3 Partition
usb controller:
AMD Renoir USB 3.1
ASMedia ASM1042A USB 3.0 Host Controller
AMD Renoir USB 3.1
Realtek USB Controller
bios:
BIOS
bridge:
AMD Renoir PCIe Dummy Host Bridge
AMD Renoir Device 24: Function 3
AMD Renoir PCIe GPP Bridge
AMD Renoir Device 24: Function 1
AMD Renoir PCIe Dummy Host Bridge
AMD Renoir PCIe GPP Bridge
AMD FCH LPC Bridge
AMD Renoir PCIe GPP Bridge
AMD Renoir Device 24: Function 6
AMD Renoir Root Complex
AMD Renoir Internal PCIe GPP Bridge to Bus
AMD Renoir Device 24: Function 4
AMD Renoir Device 24: Function 2
AMD Renoir Device 24: Function 0
AMD Renoir PCIe GPP Bridge
AMD Renoir PCIe Dummy Host Bridge
AMD Renoir Device 24: Function 7
AMD Renoir Internal PCIe GPP Bridge to Bus
AMD Renoir Device 24: Function 5
hub:
Linux Foundation 2.0 root hub
Linux Foundation 3.0 root hub
Linux Foundation 3.0 root hub
Linux Foundation 2.0 root hub
Linux Foundation 2.0 root hub
Linux Foundation 3.0 root hub
Linux Foundation 2.0 root hub
memory:
Main Memory
bluetooth:
Intel Bluetooth Device
unknown:
FPU
DMA controller
PIC
Keyboard controller
PS/2 Controller
Realtek Serial controller
AMD Renoir IOMMU
Realtek IPMI Interface
AMD Family 17h (Models 10h-1fh) Platform Security Processor
Realtek Serial controller
AMD Raven/Raven2/Renoir Sensor Fusion Hub
AMD FCH SMBus Controller
AMD Raven/Raven2/FireFlight/Renoir Audio Processor
/dev/ttyS0 16550A
/dev/ttyS1 16550A
Realtek RTS5129 Card Reader Controller
Thanks in advance