Code: Select all
uname -ra
Linux debian 4.9.0-0.bpo.3-amd64 #1 SMP Debian 4.9.30-2+deb9u2~bpo8+1 (2017-06-27) x86_64 GNU/Linux
Code: Select all
startx
I checked DMESG and it looks like:
Code: Select all
[ 1.303661] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.308713] Floppy drive(s): fd0 is 1.44M
[ 1.337441] FDC 0 is a post-1991 82077
[ 1.361709] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.361711] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.361712] usb usb3: Product: OHCI PCI host controller
[ 1.361713] usb usb3: Manufacturer: Linux 4.9.0-0.bpo.3-amd64 ohci_hcd
[ 1.361714] usb usb3: SerialNumber: 0000:00:12.0
[ 1.361849] hub 3-0:1.0: USB hub found
[ 1.361861] hub 3-0:1.0: 3 ports detected
[ 1.361983] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20160831/utaddress-247)
[ 1.361989] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.369849] scsi host4: pata_atiixp
[ 1.378097] scsi host5: pata_atiixp
[ 1.378171] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.378172] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.378371] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.378376] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.378401] ohci-pci 0000:00:12.1: irq 16, io mem 0xfcffd000
[ 1.431488] r8169 0000:02:00.0 eth1: renamed from eth0
[ 1.441736] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.441738] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.441739] usb usb4: Product: OHCI PCI host controller
[ 1.441740] usb usb4: Manufacturer: Linux 4.9.0-0.bpo.3-amd64 ohci_hcd
[ 1.441741] usb usb4: SerialNumber: 0000:00:12.1
[ 1.441953] hub 4-0:1.0: USB hub found
[ 1.441973] hub 4-0:1.0: 3 ports detected
[ 1.442224] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.442229] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.442260] ohci-pci 0000:00:13.0: irq 18, io mem 0xfcffc000
[ 1.505679] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.505681] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.505682] usb usb5: Product: OHCI PCI host controller
[ 1.505683] usb usb5: Manufacturer: Linux 4.9.0-0.bpo.3-amd64 ohci_hcd
[ 1.505684] usb usb5: SerialNumber: 0000:00:13.0
[ 1.505865] hub 5-0:1.0: USB hub found
[ 1.505872] hub 5-0:1.0: 3 ports detected
[ 1.506119] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.506124] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.506151] ohci-pci 0000:00:13.1: irq 18, io mem 0xfcffb000
[ 1.544443] ata6.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.04, max UDMA/66
[ 1.549406] ata6.00: configured for UDMA/66
[ 1.569679] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.569681] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.569682] usb usb6: Product: OHCI PCI host controller
[ 1.569683] usb usb6: Manufacturer: Linux 4.9.0-0.bpo.3-amd64 ohci_hcd
[ 1.569684] usb usb6: SerialNumber: 0000:00:13.1
[ 1.569862] hub 6-0:1.0: USB hub found
[ 1.569869] hub 6-0:1.0: 3 ports detected
[ 1.570106] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.570111] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.570135] ohci-pci 0000:00:14.5: irq 18, io mem 0xfcffa000
[ 1.620476] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.620687] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.633678] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.633680] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.633681] usb usb7: Product: OHCI PCI host controller
[ 1.633682] usb usb7: Manufacturer: Linux 4.9.0-0.bpo.3-amd64 ohci_hcd
[ 1.633683] usb usb7: SerialNumber: 0000:00:14.5
[ 1.633914] hub 7-0:1.0: USB hub found
[ 1.633923] hub 7-0:1.0: 2 ports detected
[ 1.785658] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.785687] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.786327] ata4.00: ATA-10: WDC WD10EZEX-00WN4A0, 01.01A01, max UDMA/133
[ 1.786329] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.786608] ata3.00: ATA-8: WDC WD2500AAJS-00B4A0, 01.03A01, max UDMA/133
[ 1.786611] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.787048] ata4.00: configured for UDMA/133
[ 1.787656] ata3.00: configured for UDMA/133
[ 1.787986] scsi 2:0:0:0: Direct-Access ATA WDC WD2500AAJS-0 3A01 PQ: 0 ANSI: 5
[ 1.818246] scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5
[ 1.851111] scsi 5:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.04 PQ: 0 ANSI: 5
[ 1.878678] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.878680] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 1.878692] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 1.878749] sd 2:0:0:0: [sda] Write Protect is off
[ 1.878751] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.878766] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.878767] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.878783] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.878799] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.889653] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 1.891436] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.891439] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.891604] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.902144] sdb: sdb1 sdb2 < sdb5 >
[ 1.902549] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.905294] sda: sda1 sda2
[ 1.906127] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.029101] random: fast init done
[ 2.078658] usb 5-1: New USB device found, idVendor=045e, idProduct=0040
[ 2.078660] usb 5-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.078661] usb 5-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 2.078662] usb 5-1: Manufacturer: Microsoft
[ 2.083577] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.087848] usbcore: registered new interface driver usbhid
[ 2.087849] usbhid: USB HID core driver
[ 2.089254] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:045E:0040.0001/input/input3
[ 2.089328] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1/input0
[ 2.164224] platform microcode: firmware: direct-loading firmware amd-ucode/microcode_amd.bin
[ 2.169403] device-mapper: uevent: version 1.0.3
[ 2.169481] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 2.185645] tsc: Refined TSC clocksource calibration: 2800.158 MHz
[ 2.185650] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285cd607060, max_idle_ns: 440795313832 ns
[ 2.489601] raid6: sse2x1 gen() 3640 MB/s
[ 2.557582] raid6: sse2x1 xor() 3723 MB/s
[ 2.557612] usb 5-2: new low-speed USB device number 3 using ohci-pci
[ 2.625583] raid6: sse2x2 gen() 6208 MB/s
[ 2.693582] raid6: sse2x2 xor() 6307 MB/s
[ 2.753602] usb 5-2: New USB device found, idVendor=1c4f, idProduct=0002
[ 2.753604] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.753605] usb 5-2: Product: USB Keykoard
[ 2.753606] usb 5-2: Manufacturer: USB
[ 2.760919] input: USB USB Keykoard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:1C4F:0002.0002/input/input4
[ 2.761582] raid6: sse2x4 gen() 6694 MB/s
[ 2.818047] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:13.0-2/input0
[ 2.821949] input: USB USB Keykoard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:1C4F:0002.0003/input/input5
[ 2.829581] raid6: sse2x4 xor() 3902 MB/s
[ 2.829582] raid6: using algorithm sse2x4 gen() 6694 MB/s
[ 2.829583] raid6: .... xor() 3902 MB/s, rmw enabled
[ 2.829584] raid6: using intx1 recovery algorithm
[ 2.829773] xor: measuring software checksum speed
[ 2.869574] prefetch64-sse: 10757.000 MB/sec
[ 2.881680] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:13.0-2/input1
[ 2.909573] generic_sse: 10262.000 MB/sec
[ 2.909574] xor: using function: prefetch64-sse (10757.000 MB/sec)
[ 2.947508] Btrfs loaded, crc32c=crc32c-generic
[ 3.209704] clocksource: Switched to clocksource tsc
[ 15.761601] blk_update_request: I/O error, dev fd0, sector 0
[ 15.761656] floppy: error -5 while reading block 0
[ 15.978944] PM: Starting manual resume from disk
[ 15.978948] PM: Hibernation image partition 254:1 present
[ 15.978949] PM: Looking for hibernation image.
[ 15.979111] PM: Image not found (code -22)
[ 15.979112] PM: Hibernation image not present or could not be loaded.
[ 16.121398] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 16.553350] random: crng init done
[ 18.402667] Adding 8388604k swap on /dev/mapper/debian--vg-swap_1. Priority:-1 extents:1 across:8388604k FS
[ 18.577945] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 18.918223] EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsystem
[ 18.956905] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
[ 21.209001] acpi_cpufreq: overriding BIOS provided _PSD data
[ 21.297925] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 21.297988] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x3c
[ 21.298011] sp5100_tco: failed to find MMIO address, giving up.
[ 21.303537] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 21.303541] ACPI: Power Button [PWRB]
[ 21.303591] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 21.303592] ACPI: Power Button [PWRF]
[ 21.362803] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.377109] parport_pc 00:07: reported by Plug and Play ACPI
[ 21.377197] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 21.427195] wmi: Mapper loaded
[ 21.453345] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 21.453637] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 21.453810] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 21.521997] [drm] Initialized
[ 22.045076] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 23.088447] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 23.088462] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 23.285677] ppdev: user-space parallel port driver
[ 23.542156] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 23.542160] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 23.542162] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 23.542164] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 23.542166] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 23.542167] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 23.542170] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 23.542173] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 23.542175] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 23.559190] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 23.559246] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 23.559607] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 23.559662] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 23.559713] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 23.911899] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 23.912007] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 23.912270] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 24.088259] kvm: Nested Virtualization enabled
[ 24.088266] kvm: Nested Paging enabled
[ 24.183379] EDAC MC: Ver: 3.0.0
[ 24.262739] nvidia: loading out-of-tree module taints kernel.
[ 24.262758] nvidia: module license 'NVIDIA' taints kernel.
[ 24.262760] Disabling lock debugging due to kernel taint
[ 24.280520] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 24.281704] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 24.281711] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.102 Mon Jan 16 13:06:29 PST 2017
[ 24.687876] MCE: In-kernel MCE decoding enabled.
[ 24.689214] EDAC amd64: DRAM ECC disabled.
[ 24.689223] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 25.219730] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[ 30.275007] init: failsafe main process (1300) killed by TERM signal
[ 31.639497] init: samba-ad-dc main process (1650) terminated with status 1
[ 32.482539] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 34.251821] lp0: using parport0 (interrupt-driven).
[ 34.348661] fuse init (API version 7.26)
[ 34.571243] RPC: Registered named UNIX socket transport module.
[ 34.571244] RPC: Registered udp transport module.
[ 34.571245] RPC: Registered tcp transport module.
[ 34.571245] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 34.606281] FS-Cache: Loaded
[ 34.670993] FS-Cache: Netfs 'nfs' registered for caching
[ 34.739749] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 36.963003] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[ 41.804962] init: ovirt-guest-agent main process (2412) terminated with status 1
[ 43.154578] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168d-1.fw (-2)
[ 43.154679] r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168d-1.fw failed with error -2
[ 43.154685] r8169 0000:02:00.0 eth1: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2)
[ 43.174081] r8169 0000:02:00.0 eth1: link down
[ 43.174092] r8169 0000:02:00.0 eth1: link down
[ 44.797526] r8169 0000:02:00.0 eth1: link up
[ 51.514285] audit: type=1305 audit(1500429854.212:2): audit_pid=2898 old=0 auid=4294967295 ses=4294967295 res=1
[ 53.454581] Bluetooth: Core ver 2.22
[ 53.454604] NET: Registered protocol family 31
[ 53.454605] Bluetooth: HCI device and connection manager initialized
[ 53.454611] Bluetooth: HCI socket layer initialized
[ 53.454614] Bluetooth: L2CAP socket layer initialized
[ 53.454621] Bluetooth: SCO socket layer initialized
[ 53.590272] systemd-logind[3037]: New seat seat0.
[ 53.616697] systemd-logind[3037]: Watching system buttons on /dev/input/event4 (Power Button)
[ 53.616985] systemd-logind[3037]: Watching system buttons on /dev/input/event3 (Power Button)
[ 55.113791] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 55.113795] Bluetooth: BNEP filters: protocol multicast
[ 55.113805] Bluetooth: BNEP socket layer initialized
[ 89.526333] systemd-logind[3037]: Failed to start user service, ignoring: Unknown unit: user@141.service
[ 89.534887] systemd-logind[3037]: New session c1 of user debian-security-support.
[ 90.681990] systemd-logind[3037]: New session c2 of user debian-security-support.
[ 90.929193] systemd-logind[3037]: Removed session c1.
[ 91.408577] systemd-logind[3037]: Removed session c2.
[ 91.409692] systemd-logind[3037]: Failed to stop user service: Unknown unit: user@141.service
[ 91.413158] systemd-logind[3037]: Failed to start user service, ignoring: Unknown unit: user@141.service
[ 91.417496] systemd-logind[3037]: New session c3 of user debian-security-support.
[ 91.812453] systemd-logind[3037]: Removed session c3.
[ 91.813532] systemd-logind[3037]: Failed to stop user service: Unknown unit: user@141.service
[ 111.532626] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 117.577425] Ebtables v2.0 registered
[ 354.208437] systemd-logind[3037]: Failed to start user service, ignoring: Unknown unit: user@0.service
Code: Select all
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 340.46 (buildd@brahms) Tue Oct 7 08:00:32 UTC 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection