xrandr no HDMI port detected

Everything about X, Gnome, KDE, ... and everything running on it

xrandr no HDMI port detected

Postby synthase » 2017-10-16 12:49

Hello everyone,

First sorry if I'm having typing issue, english is not my first language.

I just got an Acer Aspire 7 with I7-7700HQ and NVIDIA GTX 1050. Everything works fine excepted that I can't use a second, HDMI monitor. There's no VGA port in the computer.

> xrandr
Code: Select all
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1920x1080     60.03*+  59.93 
   1680x1050     59.95    59.88 
   1600x1024     60.17 
   1400x1050     59.98 
   1280x1024     60.02 
   1440x900      59.89 
   1280x960      60.00 
   1360x768      59.80    59.96 
   1152x864      60.00 
   1024x768      60.04    60.00 
   960x720       60.00 
   928x696       60.05 
   896x672       60.01 
   960x600       60.00 
   960x540       59.99 
   800x600       60.00    60.32    56.25 
   840x525       60.01    59.88 
   800x512       60.17 
   700x525       59.98 
   640x512       60.02 
   720x450       59.89 
   640x480       60.00    59.94 
   680x384       59.80    59.96 
   576x432       60.06 
   512x384       60.00 
   400x300       60.32    56.34 
   320x240       60.05

Bumblebee and nvidia drivers are installed and I can run optirun glxgears without problemes with more than a thousand FPS, indicating that the discrete card works ok with bumblebee/optirun.

When nvidia-settings it tells me that I'm not running X nvidia server and I should run nvidia-xconfig.

Then I can't start gdm3 after reboot cause of the following Xorg error:

Code: Select all
 grep EE /var/log/Xorg.8.log
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   312.468] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[   312.553] (EE) Failed to load module "mouse" (module does not exist, 0)
[   312.553] (EE) Failed to load module "kbd" (module does not exist, 0)
[   313.066] (EE) Failed to load module "mouse" (module does not exist, 0)
[   313.066] (EE) No input driver matching `mouse'
[   313.067] (EE) PreInit returned 2 for "<default pointer>"
[   313.067] (EE) Failed to load module "kbd" (module does not exist, 0)
[   313.067] (EE) No input driver matching `kbd'
[   313.067] (EE) PreInit returned 2 for "<default keyboard>"
[   313.072] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied

The xorg.conf generated by nvidia-xconfig:

Code: Select all
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 375.26  (buildd@debian)  Fri Jan 13 02:38:29 UTC 2017

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"

Section "Files"

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24


Code: Select all
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
# The secondary Xorg server DISPLAY number
#8Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
# The name of the Bumbleblee server group name (GID name)
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
# Directory with a dummy config file to pass as a -configdir to secondary X
# Xorg binary to run

## Client options. Will take effect on the next optirun executed.
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?

# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
# Module name to load, defaults to Driver if empty or unset
# colon-separated path to the nvidia libraries
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path

## Section with nouveau driver specific options, only parsed if Driver=nouveau

xorg.conf.nvidia (/etc/bumblebee)

Code: Select all
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
#    BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).

    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"

Section "Screen"
    Identifier "Default Screen"
    Device "DiscreteNvidia"

lspci | grep VGA

Code: Select all
00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c8d (rev ff)

Any help would be highly appreciated :)

Posts: 4
Joined: 2016-08-01 12:44

Return to Desktop & Multimedia

Who is online

Users browsing this forum: No registered users and 4 guests