xfce4-power-manager not working

Everything about X, Gnome, KDE, ... and everything running on it

xfce4-power-manager not working

Postby korbielow » 2018-10-21 10:04

hi
My xfce4-power-manager is not working. How to fix it ? My screen is not scratching off after 5 min and so on.

My debian version:
Code: Select all
root@debian:/home/rafal# cat /etc/debian_version
buster/sid
korbielow
 
Posts: 35
Joined: 2014-12-21 11:24
Location: POLAND

Re: xfce4-power-manager not working

Postby debiman » 2018-10-21 13:01

what are the current settings?

also some information about your setup wouldn't go amiss.

and maybe look at dmesg, journalctl, Xorg errors etc.?
User avatar
debiman
 
Posts: 3017
Joined: 2013-03-12 07:18

Re: xfce4-power-manager not working

Postby korbielow » 2018-10-21 14:39

My settings:
Display Blank after one is not working at all.:(
Image

Image

Image

Code: Select all
[     5.408]
X.Org X Server 1.20.1
X Protocol Version 11, Revision 0
[     5.408] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[     5.408] Current Operating System: Linux debian 4.18.0-2-amd64 #1 SMP Debian 4.18.10-2 (2018-10-07) x86_64
[     5.408] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=UUID=2d18adb9-81e4-4ad9-92c3-3e1870e31ddf ro quiet
[     5.408] Build Date: 10 October 2018  04:23:15PM
[     5.408] xorg-server 2:1.20.1-5 (https://www.debian.org/support)
[     5.408] Current version of pixman: 0.34.0
[     5.408]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[     5.408] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.408] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 21 17:08:42 2018
[     5.414] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.415] (==) No Layout section.  Using the first Screen section.
[     5.415] (==) No screen section available. Using defaults.
[     5.415] (**) |-->Screen "Default Screen Section" (0)
[     5.415] (**) |   |-->Monitor "<default monitor>"
[     5.416] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[     5.416] (==) Automatically adding devices
[     5.416] (==) Automatically enabling devices
[     5.416] (==) Automatically adding GPU devices
[     5.416] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.421] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     5.421]    Entry deleted from font path.
[     5.443] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   built-ins
[     5.443] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.443] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.443] (II) Loader magic: 0x55b19c195e20
[     5.443] (II) Module ABI versions:
[     5.443]    X.Org ANSI C Emulation: 0.4
[     5.443]    X.Org Video Driver: 24.0
[     5.443]    X.Org XInput driver : 24.1
[     5.443]    X.Org Server Extension : 10.0
[     5.444] (++) using VT number 7

[     5.444] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.445] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.453] (--) PCI:*(0@0:2:0) 8086:0046:1028:040a rev 2, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x000070b0/8, BIOS @ 0x????????/131072
[     5.453] (II) LoadModule: "glx"
[     5.456] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.468] (II) Module glx: vendor="X.Org Foundation"
[     5.468]    compiled for 1.20.1, module version = 1.0.0
[     5.468]    ABI class: X.Org Server Extension, version 10.0
[     5.468] (==) Matched modesetting as autoconfigured driver 0
[     5.468] (==) Matched fbdev as autoconfigured driver 1
[     5.468] (==) Matched vesa as autoconfigured driver 2
[     5.468] (==) Assigned the driver to the xf86ConfigLayout
[     5.468] (II) LoadModule: "modesetting"
[     5.468] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.469] (II) Module modesetting: vendor="X.Org Foundation"
[     5.469]    compiled for 1.20.1, module version = 1.20.1
[     5.469]    Module class: X.Org Video Driver
[     5.469]    ABI class: X.Org Video Driver, version 24.0
[     5.469] (II) LoadModule: "fbdev"
[     5.469] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     5.470] (II) Module fbdev: vendor="X.Org Foundation"
[     5.470]    compiled for 1.20.0, module version = 0.5.0
[     5.470]    Module class: X.Org Video Driver
[     5.470]    ABI class: X.Org Video Driver, version 24.0
[     5.470] (II) LoadModule: "vesa"
[     5.470] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.471] (II) Module vesa: vendor="X.Org Foundation"
[     5.471]    compiled for 1.20.1, module version = 2.4.0
[     5.471]    Module class: X.Org Video Driver
[     5.471]    ABI class: X.Org Video Driver, version 24.0
[     5.471] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.471] (II) FBDEV: driver for framebuffer: fbdev
[     5.471] (II) VESA: driver for VESA chipsets: vesa
[     5.499] (II) modeset(0): using drv /dev/dri/card0
[     5.499] (WW) Falling back to old probe method for fbdev
[     5.499] (II) Loading sub module "fbdevhw"
[     5.499] (II) LoadModule: "fbdevhw"
[     5.500] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     5.500] (II) Module fbdevhw: vendor="X.Org Foundation"
[     5.500]    compiled for 1.20.1, module version = 0.0.2
[     5.500]    ABI class: X.Org Video Driver, version 24.0
[     5.501] (II) modeset(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[     5.501] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     5.501] (==) modeset(0): RGB weight 888
[     5.501] (==) modeset(0): Default visual is TrueColor
[     5.501] (II) Loading sub module "glamoregl"
[     5.501] (II) LoadModule: "glamoregl"
[     5.501] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     5.510] (II) Module glamoregl: vendor="X.Org Foundation"
[     5.510]    compiled for 1.20.1, module version = 1.0.1
[     5.510]    ABI class: X.Org ANSI C Emulation, version 0.4
[     5.595] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) Ironlake Mobile
[     5.595] (II) modeset(0): glamor initialized
[     5.596] (II) modeset(0): Output eDP-1 has no monitor section
[     5.597] (II) modeset(0): Output VGA-1 has no monitor section
[     5.599] (II) modeset(0): Output HDMI-1 has no monitor section
[     5.599] (II) modeset(0): Output DP-1 has no monitor section
[     5.600] (II) modeset(0): Output HDMI-2 has no monitor section
[     5.600] (II) modeset(0): Output DP-2 has no monitor section
[     5.602] (II) modeset(0): EDID for output eDP-1
[     5.602] (II) modeset(0): Manufacturer: SEC  Model: 5442  Serial#: 0
[     5.602] (II) modeset(0): Year: 2010  Week: 0
[     5.602] (II) modeset(0): EDID Version: 1.4
[     5.602] (II) modeset(0): Digital Display Input
[     5.602] (II) modeset(0): 6 bits per channel
[     5.602] (II) modeset(0): Digital interface is DisplayPort
[     5.602] (II) modeset(0): Max Image Size [cm]: horiz.: 30  vert.: 19
[     5.602] (II) modeset(0): Gamma: 2.20
[     5.602] (II) modeset(0): No DPMS capabilities specified
[     5.602] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[     5.602] (II) modeset(0): First detailed timing is preferred mode
[     5.602] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     5.602] (II) modeset(0): redX: 0.544 redY: 0.357   greenX: 0.340 greenY: 0.585
[     5.602] (II) modeset(0): blueX: 0.160 blueY: 0.118   whiteX: 0.310 whiteY: 0.330
[     5.602] (II) modeset(0): Manufacturer's mask: 0
[     5.602] (II) modeset(0): Supported detailed timing:
[     5.602] (II) modeset(0): clock: 107.8 MHz   Image Size:  303 x 190 mm
[     5.602] (II) modeset(0): h_active: 1440  h_sync: 1486  h_sync_end 1556 h_blank_end 1928 h_border: 0
[     5.602] (II) modeset(0): v_active: 900  v_sync: 909  v_sync_end 918 v_blanking: 932 v_border: 0
[     5.602] (II) modeset(0): Supported detailed timing:
[     5.602] (II) modeset(0): clock: 71.9 MHz   Image Size:  303 x 190 mm
[     5.602] (II) modeset(0): h_active: 1440  h_sync: 1486  h_sync_end 1556 h_blank_end 1928 h_border: 0
[     5.602] (II) modeset(0): v_active: 900  v_sync: 909  v_sync_end 918 v_blanking: 932 v_border: 0
[     5.602] (II) modeset(0):  WG407141BT
[     5.602] (II) modeset(0): Unknown vendor-specific block 0
[     5.602] (II) modeset(0): EDID (in hex):
[     5.602] (II) modeset(0):    00ffffffffffff004ca3425400000000
[     5.602] (II) modeset(0):    00140104951e13780a63168b5b579529
[     5.602] (II) modeset(0):    1e4f5400000001010101010101010101
[     5.602] (II) modeset(0):    0101010101011d2aa0e8518420302e46
[     5.602] (II) modeset(0):    99002fbe1000001a141ca0e851842030
[     5.602] (II) modeset(0):    2e4699002fbe1000001a000000fe0057
[     5.602] (II) modeset(0):    473430378131343142540a2000000000
[     5.602] (II) modeset(0):    00004101190000000009010a20200005
[     5.602] (II) modeset(0): Printing probed modes for output eDP-1
[     5.602] (II) modeset(0): Modeline "1440x900"x60.0  107.81  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (55.9 kHz eP)
[     5.602] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[     5.602] (II) modeset(0): Modeline "1440x900"x40.0   71.88  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (37.3 kHz e)
[     5.602] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[     5.602] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[     5.602] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[     5.602] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[     5.602] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[     5.602] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[     5.602] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[     5.602] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[     5.602] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[     5.602] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[     5.602] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[     5.602] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[     5.602] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[     5.602] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[     5.602] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[     5.602] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[     5.602] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[     5.602] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     5.602] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     5.602] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     5.602] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     5.602] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     5.602] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[     5.602] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[     5.602] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[     5.602] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[     5.602] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[     5.602] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[     5.602] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[     5.602] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[     5.603] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[     5.603] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[     5.603] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     5.603] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     5.603] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     5.603] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[     5.603] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[     5.603] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[     5.603] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[     5.603] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[     5.603] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     5.603] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[     5.603] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[     5.603] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     5.603] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[     5.603] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[     5.603] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[     5.603] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     5.603] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     5.603] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[     5.603] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[     5.603] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[     5.603] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[     5.603] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[     5.603] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[     5.603] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[     5.603] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[     5.603] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[     5.603] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[     5.603] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[     5.603] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[     5.603] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[     5.603] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     5.603] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[     5.603] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[     5.603] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[     5.603] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[     5.603] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     5.603] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     5.603] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[     5.603] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[     5.603] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     5.603] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[     5.603] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[     5.603] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[     5.603] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[     5.604] (II) modeset(0): EDID for output VGA-1
[     5.605] (II) modeset(0): EDID for output HDMI-1
[     5.605] (II) modeset(0): EDID for output DP-1
[     5.607] (II) modeset(0): EDID for output HDMI-2
[     5.607] (II) modeset(0): EDID for output DP-2
[     5.607] (II) modeset(0): Output eDP-1 connected
[     5.607] (II) modeset(0): Output VGA-1 disconnected
[     5.607] (II) modeset(0): Output HDMI-1 disconnected
[     5.607] (II) modeset(0): Output DP-1 disconnected
[     5.607] (II) modeset(0): Output HDMI-2 disconnected
[     5.607] (II) modeset(0): Output DP-2 disconnected
[     5.607] (II) modeset(0): Using exact sizes for initial modes
[     5.607] (II) modeset(0): Output eDP-1 using initial mode 1440x900 +0+0
[     5.607] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.607] (==) modeset(0): DPI set to (96, 96)
[     5.607] (II) Loading sub module "fb"
[     5.607] (II) LoadModule: "fb"
[     5.607] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.608] (II) Module fb: vendor="X.Org Foundation"
[     5.608]    compiled for 1.20.1, module version = 1.0.0
[     5.608]    ABI class: X.Org ANSI C Emulation, version 0.4
[     5.608] (II) UnloadModule: "fbdev"
[     5.608] (II) Unloading fbdev
[     5.608] (II) UnloadSubModule: "fbdevhw"
[     5.608] (II) Unloading fbdevhw
[     5.608] (II) UnloadModule: "vesa"
[     5.608] (II) Unloading vesa
[     5.624] (==) modeset(0): Backing store enabled
[     5.624] (==) modeset(0): Silken mouse enabled
[     5.667] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[     5.667] (==) modeset(0): DPMS enabled
[     5.668] (II) modeset(0): [DRI2] Setup complete
[     5.668] (II) modeset(0): [DRI2]   DRI driver: i965
[     5.668] (II) modeset(0): [DRI2]   VDPAU driver: i965
[     5.668] (II) Initializing extension Generic Event Extension
[     5.668] (II) Initializing extension SHAPE
[     5.668] (II) Initializing extension MIT-SHM
[     5.669] (II) Initializing extension XInputExtension
[     5.670] (II) Initializing extension XTEST
[     5.670] (II) Initializing extension BIG-REQUESTS
[     5.670] (II) Initializing extension SYNC
[     5.671] (II) Initializing extension XKEYBOARD
[     5.671] (II) Initializing extension XC-MISC
[     5.672] (II) Initializing extension SECURITY
[     5.672] (II) Initializing extension XFIXES
[     5.672] (II) Initializing extension RENDER
[     5.673] (II) Initializing extension RANDR
[     5.673] (II) Initializing extension COMPOSITE
[     5.674] (II) Initializing extension DAMAGE
[     5.674] (II) Initializing extension MIT-SCREEN-SAVER
[     5.674] (II) Initializing extension DOUBLE-BUFFER
[     5.675] (II) Initializing extension RECORD
[     5.675] (II) Initializing extension DPMS
[     5.675] (II) Initializing extension Present
[     5.676] (II) Initializing extension DRI3
[     5.676] (II) Initializing extension X-Resource
[     5.677] (II) Initializing extension XVideo
[     5.677] (II) Initializing extension XVideo-MotionCompensation
[     5.677] (II) Initializing extension SELinux
[     5.677] (II) SELinux: Disabled on system
[     5.677] (II) Initializing extension GLX
[     5.688] (II) AIGLX: Loaded and initialized i965
[     5.688] (II) GLX: Initialized DRI2 GL provider for screen 0
[     5.688] (II) Initializing extension XFree86-VidModeExtension
[     5.688] (II) Initializing extension XFree86-DGA
[     5.688] (II) Initializing extension XFree86-DRI
[     5.688] (II) Initializing extension DRI2
[     5.698] (II) modeset(0): Damage tracking initialized
[     5.698] (II) modeset(0): Setting screen physical size to 381 x 238
[     5.783] (II) config/udev: Adding input device Power Button (/dev/input/event10)
[     5.783] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.783] (II) LoadModule: "libinput"
[     5.783] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     5.790] (II) Module libinput: vendor="X.Org Foundation"
[     5.790]    compiled for 1.20.0, module version = 0.28.0
[     5.790]    Module class: X.Org XInput Driver
[     5.790]    ABI class: X.Org XInput driver, version 24.1
[     5.790] (II) Using input driver 'libinput' for 'Power Button'
[     5.790] (**) Power Button: always reports core events
[     5.790] (**) Option "Device" "/dev/input/event10"
[     5.790] (**) Option "_source" "server/udev"
[     5.795] (II) event10 - Power Button: is tagged by udev as: Keyboard
[     5.795] (II) event10 - Power Button: device is a keyboard
[     5.795] (II) event10 - Power Button: device removed
[     5.820] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event10"
[     5.820] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.820] (**) Option "xkb_model" "pc105"
[     5.820] (**) Option "xkb_layout" "pl"
[     5.851] (II) event10 - Power Button: is tagged by udev as: Keyboard
[     5.851] (II) event10 - Power Button: device is a keyboard
[     5.852] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[     5.852] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.852] (II) Using input driver 'libinput' for 'Video Bus'
[     5.852] (**) Video Bus: always reports core events
[     5.852] (**) Option "Device" "/dev/input/event13"
[     5.852] (**) Option "_source" "server/udev"
[     5.853] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[     5.853] (II) event13 - Video Bus: device is a keyboard
[     5.853] (II) event13 - Video Bus: device removed
[     5.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input16/event13"
[     5.900] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     5.900] (**) Option "xkb_model" "pc105"
[     5.900] (**) Option "xkb_layout" "pl"
[     5.902] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[     5.902] (II) event13 - Video Bus: device is a keyboard
[     5.903] (II) config/udev: Adding input device Power Button (/dev/input/event8)
[     5.903] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.903] (II) Using input driver 'libinput' for 'Power Button'
[     5.903] (**) Power Button: always reports core events
[     5.903] (**) Option "Device" "/dev/input/event8"
[     5.903] (**) Option "_source" "server/udev"
[     5.905] (II) event8  - Power Button: is tagged by udev as: Keyboard
[     5.905] (II) event8  - Power Button: device is a keyboard
[     5.905] (II) event8  - Power Button: device removed
[     5.924] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event8"
[     5.924] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     5.924] (**) Option "xkb_model" "pc105"
[     5.924] (**) Option "xkb_layout" "pl"
[     5.926] (II) event8  - Power Button: is tagged by udev as: Keyboard
[     5.926] (II) event8  - Power Button: device is a keyboard
[     5.927] (II) config/udev: Adding input device Lid Switch (/dev/input/event7)
[     5.927] (II) No input driver specified, ignoring this device.
[     5.927] (II) This device may have been added with another device file.
[     5.927] (II) config/udev: Adding input device Sleep Button (/dev/input/event9)
[     5.927] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     5.927] (II) Using input driver 'libinput' for 'Sleep Button'
[     5.927] (**) Sleep Button: always reports core events
[     5.927] (**) Option "Device" "/dev/input/event9"
[     5.927] (**) Option "_source" "server/udev"
[     5.929] (II) event9  - Sleep Button: is tagged by udev as: Keyboard
[     5.929] (II) event9  - Sleep Button: device is a keyboard
[     5.929] (II) event9  - Sleep Button: device removed
[     5.956] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event9"
[     5.956] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     5.956] (**) Option "xkb_model" "pc105"
[     5.956] (**) Option "xkb_layout" "pl"
[     5.958] (II) event9  - Sleep Button: is tagged by udev as: Keyboard
[     5.958] (II) event9  - Sleep Button: device is a keyboard
[     5.960] (II) config/udev: Adding input device Laptop_Integrated_Webcam_3M: In (/dev/input/event11)
[     5.961] (**) Laptop_Integrated_Webcam_3M: In: Applying InputClass "libinput keyboard catchall"
[     5.961] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_3M: In'
[     5.961] (**) Laptop_Integrated_Webcam_3M: In: always reports core events
[     5.961] (**) Option "Device" "/dev/input/event11"
[     5.961] (**) Option "_source" "server/udev"
[     5.964] (II) event11 - Laptop_Integrated_Webcam_3M: In: is tagged by udev as: Keyboard
[     5.964] (II) event11 - Laptop_Integrated_Webcam_3M: In: device is a keyboard
[     5.964] (II) event11 - Laptop_Integrated_Webcam_3M: In: device removed
[     6.004] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14/event11"
[     6.004] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_3M: In" (type: KEYBOARD, id 10)
[     6.004] (**) Option "xkb_model" "pc105"
[     6.004] (**) Option "xkb_layout" "pl"
[     6.007] (II) event11 - Laptop_Integrated_Webcam_3M: In: is tagged by udev as: Keyboard
[     6.007] (II) event11 - Laptop_Integrated_Webcam_3M: In: device is a keyboard
[     6.008] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event14)
[     6.008] (II) No input driver specified, ignoring this device.
[     6.008] (II) This device may have been added with another device file.
[     6.008] (II) config/udev: Adding input device HDA Intel MID Dock Mic (/dev/input/event15)
[     6.008] (II) No input driver specified, ignoring this device.
[     6.008] (II) This device may have been added with another device file.
[     6.009] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event16)
[     6.009] (II) No input driver specified, ignoring this device.
[     6.009] (II) This device may have been added with another device file.
[     6.010] (II) config/udev: Adding input device HDA Intel MID Dock Line Out (/dev/input/event17)
[     6.010] (II) No input driver specified, ignoring this device.
[     6.010] (II) This device may have been added with another device file.
[     6.011] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event18)
[     6.011] (II) No input driver specified, ignoring this device.
[     6.011] (II) This device may have been added with another device file.
[     6.011] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event19)
[     6.011] (II) No input driver specified, ignoring this device.
[     6.011] (II) This device may have been added with another device file.
[     6.012] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event20)
[     6.012] (II) No input driver specified, ignoring this device.
[     6.012] (II) This device may have been added with another device file.
[     6.013] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[     6.013] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[     6.013] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[     6.013] (**) Logitech USB Receiver: always reports core events
[     6.013] (**) Option "Device" "/dev/input/event1"
[     6.013] (**) Option "_source" "server/udev"
[     6.014] (II) event1  - Logitech USB Receiver: is tagged by udev as: Keyboard
[     6.015] (II) event1  - Logitech USB Receiver: device is a keyboard
[     6.015] (II) event1  - Logitech USB Receiver: device removed
[     6.036] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C534.0001/input/input3/event1"
[     6.036] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[     6.036] (**) Option "xkb_model" "pc105"
[     6.036] (**) Option "xkb_layout" "pl"
[     6.038] (II) event1  - Logitech USB Receiver: is tagged by udev as: Keyboard
[     6.038] (II) event1  - Logitech USB Receiver: device is a keyboard
[     6.039] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event2)
[     6.039] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
[     6.039] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[     6.040] (**) Logitech USB Receiver Mouse: always reports core events
[     6.040] (**) Option "Device" "/dev/input/event2"
[     6.040] (**) Option "_source" "server/udev"
[     6.043] (II) event2  - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[     6.043] (II) event2  - Logitech USB Receiver Mouse: device is a pointer
[     6.043] (II) event2  - Logitech USB Receiver Mouse: device removed
[     6.072] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C534.0002/input/input4/event2"
[     6.072] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 12)
[     6.072] (**) Option "AccelerationScheme" "none"
[     6.072] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
[     6.072] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
[     6.072] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
[     6.075] (II) event2  - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[     6.075] (II) event2  - Logitech USB Receiver Mouse: device is a pointer
[     6.076] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse0)
[     6.076] (II) No input driver specified, ignoring this device.
[     6.076] (II) This device may have been added with another device file.
[     6.077] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event3)
[     6.077] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.077] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[     6.077] (**) Logitech USB Receiver Consumer Control: always reports core events
[     6.077] (**) Option "Device" "/dev/input/event3"
[     6.077] (**) Option "_source" "server/udev"
[     6.080] (II) event3  - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[     6.080] (II) event3  - Logitech USB Receiver Consumer Control: device is a keyboard
[     6.080] (II) event3  - Logitech USB Receiver Consumer Control: device removed
[     6.096] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[     6.096] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C534.0002/input/input5/event3"
[     6.096] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 13)
[     6.096] (**) Option "AccelerationScheme" "none"
[     6.096] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[     6.096] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[     6.096] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[     6.098] (II) event3  - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[     6.098] (II) event3  - Logitech USB Receiver Consumer Control: device is a keyboard
[     6.099] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event4)
[     6.099] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[     6.099] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
[     6.099] (**) Logitech USB Receiver System Control: always reports core events
[     6.099] (**) Option "Device" "/dev/input/event4"
[     6.099] (**) Option "_source" "server/udev"
[     6.101] (II) event4  - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[     6.101] (II) event4  - Logitech USB Receiver System Control: device is a keyboard
[     6.101] (II) event4  - Logitech USB Receiver System Control: device removed
[     6.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C534.0002/input/input6/event4"
[     6.120] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 14)
[     6.120] (**) Option "xkb_model" "pc105"
[     6.120] (**) Option "xkb_layout" "pl"
[     6.123] (II) event4  - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[     6.123] (II) event4  - Logitech USB Receiver System Control: device is a keyboard
[     6.124] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event12)
[     6.124] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     6.124] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[     6.124] (**) Dell WMI hotkeys: always reports core events
[     6.124] (**) Option "Device" "/dev/input/event12"
[     6.124] (**) Option "_source" "server/udev"
[     6.125] (II) event12 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     6.125] (II) event12 - Dell WMI hotkeys: device is a keyboard
[     6.125] (II) event12 - Dell WMI hotkeys: device removed
[     6.160] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input15/event12"
[     6.160] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
[     6.160] (**) Option "xkb_model" "pc105"
[     6.160] (**) Option "xkb_layout" "pl"
[     6.162] (II) event12 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     6.162] (II) event12 - Dell WMI hotkeys: device is a keyboard
[     6.163] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     6.163] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     6.163] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     6.163] (**) AT Translated Set 2 keyboard: always reports core events
[     6.163] (**) Option "Device" "/dev/input/event0"
[     6.163] (**) Option "_source" "server/udev"
[     6.165] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.165] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     6.165] (II) event0  - AT Translated Set 2 keyboard: device removed
[     6.184] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     6.184] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[     6.184] (**) Option "xkb_model" "pc105"
[     6.184] (**) Option "xkb_layout" "pl"
[     6.185] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.185] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     6.186] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event6)
[     6.186] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "libinput touchpad catchall"
[     6.186] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[     6.186] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[     6.186] (**) Option "Device" "/dev/input/event6"
[     6.187] (**) Option "_source" "server/udev"
[     6.188] (II) event6  - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[     6.188] (II) event6  - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[     6.189] (II) event6  - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[     6.189] (II) event6  - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[     6.240] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event6"
[     6.240] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 17)
[     6.241] (**) Option "AccelerationScheme" "none"
[     6.241] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) selected scheme none/0
[     6.241] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[     6.241] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[     6.243] (II) event6  - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[     6.243] (II) event6  - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[     6.244] (II) event6  - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[     6.246] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[     6.246] (II) No input driver specified, ignoring this device.
[     6.246] (II) This device may have been added with another device file.
[     6.247] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event5)
[     6.247] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "libinput pointer catchall"
[     6.247] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint Stick'
[     6.247] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[     6.247] (**) Option "Device" "/dev/input/event5"
[     6.247] (**) Option "_source" "server/udev"
[     6.248] (II) event5  - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[     6.249] (II) event5  - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[     6.249] (II) event5  - AlpsPS/2 ALPS DualPoint Stick: device removed
[     6.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event5"
[     6.300] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 18)
[     6.300] (**) Option "AccelerationScheme" "none"
[     6.300] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[     6.300] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[     6.300] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[     6.302] (II) event5  - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[     6.302] (II) event5  - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[     6.304] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse1)
[     6.304] (II) No input driver specified, ignoring this device.
[     6.304] (II) This device may have been added with another device file.
[     6.310] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.310] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[     6.310] (**) Logitech USB Receiver Consumer Control: always reports core events
[     6.310] (**) Option "Device" "/dev/input/event3"
[     6.310] (**) Option "_source" "_driver/libinput"
[     6.310] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[     6.310] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C534.0002/input/input5/event3"
[     6.310] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 19)
[     6.310] (**) Option "xkb_model" "pc105"
[     6.310] (**) Option "xkb_layout" "pl"
[    12.206] (II) modeset(0): EDID vendor "SEC", prod id 21570
[    12.206] (II) modeset(0): Printing DDC gathered Modelines:
[    12.206] (II) modeset(0): Modeline "1440x900"x0.0  107.81  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (55.9 kHz eP)
[    12.207] (II) modeset(0): Modeline "1440x900"x0.0   71.88  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (37.3 kHz e)
[    12.337] (II) modeset(0): EDID vendor "SEC", prod id 21570
[    12.337] (II) modeset(0): Printing DDC gathered Modelines:
[    12.337] (II) modeset(0): Modeline "1440x900"x0.0  107.81  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (55.9 kHz eP)
[    12.337] (II) modeset(0): Modeline "1440x900"x0.0   71.88  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (37.3 kHz e)
[    12.857] (II) modeset(0): EDID vendor "SEC", prod id 21570
[    12.857] (II) modeset(0): Printing DDC gathered Modelines:
[    12.857] (II) modeset(0): Modeline "1440x900"x0.0  107.81  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (55.9 kHz eP)
[    12.857] (II) modeset(0): Modeline "1440x900"x0.0   71.88  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (37.3 kHz e)
[    53.116] (II) modeset(0): EDID vendor "SEC", prod id 21570
[    53.116] (II) modeset(0): Printing DDC gathered Modelines:
[    53.116] (II) modeset(0): Modeline "1440x900"x0.0  107.81  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (55.9 kHz eP)
[    53.117] (II) modeset(0): Modeline "1440x900"x0.0   71.88  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (37.3 kHz e)
[    53.499] (II) modeset(0): EDID vendor "SEC", prod id 21570
[    53.499] (II) modeset(0): Printing DDC gathered Modelines:
[    53.499] (II) modeset(0): Modeline "1440x900"x0.0  107.81  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (55.9 kHz eP)
[    53.499] (II) modeset(0): Modeline "1440x900"x0.0   71.88  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (37.3 kHz e)
Last edited by korbielow on 2018-10-21 14:45, edited 1 time in total.
korbielow
 
Posts: 35
Joined: 2014-12-21 11:24
Location: POLAND

Re: xfce4-power-manager not working

Postby korbielow » 2018-10-21 14:42

Code: Select all
[code][    0.000000] Linux version 4.18.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-29)) #1 SMP Debian 4.18.10-2 (2018-10-07)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=UUID=2d18adb9-81e4-4ad9-92c3-3e1870e31ddf ro quiet
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x52e with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u262144
[    0.000000] pcpu-alloc: s142744 r8192 d29288 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2045700
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=UUID=2d18adb9-81e4-4ad9-92c3-3e1870e31ddf ro quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.032000] x86: Booting SMP configuration:
[    0.032000] .... node  #0, CPUs:      #1 #2 #3
[    0.036088] smp: Brought up 1 node, 4 CPUs
[    0.036088] smpboot: Max logical packages: 2
[    0.036088] smpboot: Total of 4 processors activated (21278.77 BogoMIPS)
[    0.037966] devtmpfs: initialized
[    0.037966] x86/mm: Memory block size: 128MB
[    0.037966] PM: Registering ACPI NVS region [mem 0xdb67f000-0xdb76efff] (983040 bytes)
[    0.037966] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040013] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.040084] pinctrl core: initialized pinctrl subsystem
[    0.040266] NET: Registered protocol family 16
[    0.040345] audit: initializing netlink subsys (disabled)
[    0.040353] audit: type=2000 audit(1540141717.040:1): state=initialized audit_enabled=0 res=1
[    0.040353] cpuidle: using governor ladder
[    0.040353] cpuidle: using governor menu
[    0.040353] Simple Boot Flag at 0xf1 set to 0x1
[    0.040353] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.040353] ACPI: bus type PCI registered
[    0.040353] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040353] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.040353] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.040353] PCI: Using configuration type 1 for base access
[    0.040353] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.040353] mtrr: probably your BIOS does not setup all CPUs.
[    0.040353] mtrr: corrected configuration.
[    0.040803] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.040803] ACPI: Added _OSI(Module Device)
[    0.040803] ACPI: Added _OSI(Processor Device)
[    0.040803] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.040803] ACPI: Added _OSI(Processor Aggregator Device)
[    0.040803] ACPI: Added _OSI(Linux-Dell-Video)
[    0.045096] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.048002] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.056285] ACPI: Dynamic OEM Table Load:
[    0.056291] ACPI: SSDT 0xFFFF90DED5C3D800 000474 (v01 PmRef  Cpu0Ist  00003000 INTL 20080729)
[    0.056613] ACPI: Dynamic OEM Table Load:
[    0.056617] ACPI: SSDT 0xFFFF90DED5E6D000 000891 (v01 PmRef  Cpu0Cst  00003001 INTL 20080729)
[    0.056896] ACPI: Dynamic OEM Table Load:
[    0.056896] ACPI: SSDT 0xFFFF90DED5E51000 000303 (v01 PmRef  ApIst    00003000 INTL 20080729)
[    0.056896] ACPI: Dynamic OEM Table Load:
[    0.056896] ACPI: SSDT 0xFFFF90DED5DA7400 000119 (v01 PmRef  ApCst    00003000 INTL 20080729)
[    0.056896] ACPI: EC: EC started
[    0.056896] ACPI: EC: interrupt blocked
[    0.060355] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[    0.060355] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.060355] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[    0.060355] ACPI: Interpreter enabled
[    0.060355] ACPI: (supports S0 S3 S4 S5)
[    0.060355] ACPI: Using IOAPIC for interrupt routing
[    0.060355] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.060355] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.072681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.072681] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.072711] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.073171] PCI host bridge to bus 0000:00
[    0.073174] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.073175] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.073176] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.073178] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.073180] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.073189] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.073210] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.073280] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    0.073290] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.073295] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.073298] pci 0000:00:02.0: reg 0x20: [io  0x70b0-0x70b7]
[    0.073414] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[    0.073440] pci 0000:00:19.0: reg 0x10: [mem 0xf6900000-0xf691ffff]
[    0.073450] pci 0000:00:19.0: reg 0x14: [mem 0xf6980000-0xf6980fff]
[    0.073461] pci 0000:00:19.0: reg 0x18: [io  0x7040-0x705f]
[    0.073545] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.073629] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.073656] pci 0000:00:1a.0: reg 0x10: [mem 0xf6970000-0xf69703ff]
[    0.073755] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.073840] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.073871] pci 0000:00:1b.0: reg 0x10: [mem 0xf6960000-0xf6963fff 64bit]
[    0.073977] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.074066] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.074173] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.074266] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.074372] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.074465] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    0.074571] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.074662] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[    0.074768] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.074866] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.074892] pci 0000:00:1d.0: reg 0x10: [mem 0xf6950000-0xf69503ff]
[    0.076086] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.076167] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.076309] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[    0.076489] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[    0.076515] pci 0000:00:1f.2: reg 0x10: [io  0x7090-0x7097]
[    0.076526] pci 0000:00:1f.2: reg 0x14: [io  0x7080-0x7083]
[    0.076536] pci 0000:00:1f.2: reg 0x18: [io  0x7070-0x7077]
[    0.076546] pci 0000:00:1f.2: reg 0x1c: [io  0x7060-0x7063]
[    0.076556] pci 0000:00:1f.2: reg 0x20: [io  0x7020-0x703f]
[    0.076567] pci 0000:00:1f.2: reg 0x24: [mem 0xf6940000-0xf69407ff]
[    0.076625] pci 0000:00:1f.2: PME# supported from D3hot
[    0.076704] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.076731] pci 0000:00:1f.3: reg 0x10: [mem 0xf6930000-0xf69300ff 64bit]
[    0.076760] pci 0000:00:1f.3: reg 0x20: [io  0x7000-0x701f]
[    0.076863] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.076893] pci 0000:00:1f.6: reg 0x10: [mem 0xf6920000-0xf6920fff 64bit]
[    0.077096] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.077100] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    0.077104] pci 0000:00:1c.0:   bridge window [mem 0xf5500000-0xf68fffff]
[    0.077249] pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
[    0.077365] pci 0000:02:00.0: reg 0x10: [mem 0xf4100000-0xf4103fff 64bit]
[    0.077557] pci 0000:02:00.0: enabling Extended Tags
[    0.077811] pci 0000:02:00.0: supports D1 D2
[    0.077812] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.078089] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.078093] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.078097] pci 0000:00:1c.1:   bridge window [mem 0xf4100000-0xf54fffff]
[    0.078226] pci 0000:03:00.0: [1180:e822] type 00 class 0x080501
[    0.078249] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
[    0.078279] pci 0000:03:00.0: reg 0x10: [mem 0xf2c40000-0xf2c400ff]
[    0.078449] pci 0000:03:00.0: supports D1 D2
[    0.078450] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.078593] pci 0000:03:00.4: [1180:e832] type 00 class 0x0c0010
[    0.078629] pci 0000:03:00.4: reg 0x10: [mem 0xf2c00000-0xf2c007ff]
[    0.078732] pci 0000:03:00.4: Enabling fixed DMA alias to 00.0
[    0.078803] pci 0000:03:00.4: supports D1 D2
[    0.078804] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.078961] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[    0.078965] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
[    0.078969] pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf2cfffff]
[    0.079057] acpiphp: Slot [1] registered
[    0.079063] pci 0000:00:1c.3: PCI bridge to [bus 05-0a]
[    0.079067] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.079071] pci 0000:00:1c.3:   bridge window [mem 0xf2d00000-0xf40fffff]
[    0.079100] pci_bus 0000:0b: extended config space not accessible
[    0.079154] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
[    0.079166] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.079167] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.079169] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.079170] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.080233] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.080282] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.080330] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.080376] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.080423] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.080470] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.080518] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.080564] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.084062] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[    0.084066] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.084069] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.084133] PCI host bridge to bus 0000:3f
[    0.084135] pci_bus 0000:3f: root bus resource [bus 3f]
[    0.084140] pci 0000:3f:00.0: [8086:2c62] type 00 class 0x060000
[    0.084183] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
[    0.084228] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
[    0.084266] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
[    0.084304] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
[    0.084342] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
[    0.084799] ACPI: EC: interrupt unblocked
[    0.084799] ACPI: EC: event unblocked
[    0.084799] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.084799] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[    0.084799] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.084799] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.084799] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.084799] vgaarb: loaded
[    0.084799] pps_core: LinuxPPS API ver. 1 registered
[    0.084799] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.084799] PTP clock support registered
[    0.084799] EDAC MC: Ver: 3.0.0
[    0.084799] PCI: Using ACPI for IRQ routing
[    0.085658] PCI: pci_cache_line_size set to 64 bytes
[    0.085843] e820: reserve RAM buffer [mem 0x00095c00-0x0009ffff]
[    0.085844] e820: reserve RAM buffer [mem 0xdb65f000-0xdbffffff]
[    0.088048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.088053] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.088053] clocksource: Switched to clocksource tsc-early
[    0.098592] VFS: Disk quotas dquot_6.6.0
[    0.098613] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.098732] AppArmor: AppArmor Filesystem Enabled
[    0.098754] pnp: PnP ACPI init
[    0.098964] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.098966] system 00:00: [io  0x1000-0x1003] has been reserved
[    0.098968] system 00:00: [io  0x1004-0x1013] has been reserved
[    0.098969] system 00:00: [io  0xffff] has been reserved
[    0.098971] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.098972] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.098974] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.098980] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.099005] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.099027] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.100456] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (disabled)
[    0.100477] pnp 00:04: Plug and Play ACPI device, IDs DLL040a PNP0f13 (active)
[    0.100686] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.100688] system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.100689] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.100691] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.100694] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.100696] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.100697] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.100699] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.100701] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.100702] system 00:05: [mem 0xf69c0000-0xf69c0fff] has been reserved
[    0.100706] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.102984] pnp: PnP ACPI: found 6 devices
[    0.108726] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.108746] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.108756] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.108767] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-04] add_size 200000 add_align 100000
[    0.108777] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-0a] add_size 200000 add_align 100000
[    0.108797] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6a00000-0xf6bfffff 64bit pref]
[    0.108800] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6c00000-0xf6dfffff 64bit pref]
[    0.108804] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf6e00000-0xf6ffffff 64bit pref]
[    0.108807] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf7000000-0xf71fffff 64bit pref]
[    0.108810] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.108814] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    0.108819] pci 0000:00:1c.0:   bridge window [mem 0xf5500000-0xf68fffff]
[    0.108823] pci 0000:00:1c.0:   bridge window [mem 0xf6a00000-0xf6bfffff 64bit pref]
[    0.108830] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.108833] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.108838] pci 0000:00:1c.1:   bridge window [mem 0xf4100000-0xf54fffff]
[    0.108843] pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6dfffff 64bit pref]
[    0.108849] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[    0.108852] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
[    0.108858] pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf2cfffff]
[    0.108862] pci 0000:00:1c.2:   bridge window [mem 0xf6e00000-0xf6ffffff 64bit pref]
[    0.108868] pci 0000:00:1c.3: PCI bridge to [bus 05-0a]
[    0.108871] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.108877] pci 0000:00:1c.3:   bridge window [mem 0xf2d00000-0xf40fffff]
[    0.108881] pci 0000:00:1c.3:   bridge window [mem 0xf7000000-0xf71fffff 64bit pref]
[    0.108888] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[    0.108903] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.108904] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.108906] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.108907] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff window]
[    0.108909] pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
[    0.108910] pci_bus 0000:01: resource 1 [mem 0xf5500000-0xf68fffff]
[    0.108911] pci_bus 0000:01: resource 2 [mem 0xf6a00000-0xf6bfffff 64bit pref]
[    0.108912] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.108914] pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf54fffff]
[    0.108915] pci_bus 0000:02: resource 2 [mem 0xf6c00000-0xf6dfffff 64bit pref]
[    0.108916] pci_bus 0000:03: resource 0 [io  0x2000-0x3fff]
[    0.108917] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf2cfffff]
[    0.108919] pci_bus 0000:03: resource 2 [mem 0xf6e00000-0xf6ffffff 64bit pref]
[    0.108920] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.108921] pci_bus 0000:05: resource 1 [mem 0xf2d00000-0xf40fffff]
[    0.108922] pci_bus 0000:05: resource 2 [mem 0xf7000000-0xf71fffff 64bit pref]
[    0.108924] pci_bus 0000:0b: resource 4 [io  0x0000-0x0cf7 window]
[    0.108925] pci_bus 0000:0b: resource 5 [io  0x0d00-0xffff window]
[    0.108927] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.108928] pci_bus 0000:0b: resource 7 [mem 0xe0000000-0xfeafffff window]
[    0.109014] NET: Registered protocol family 2
[    0.109173] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.109205] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.109340] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.109523] TCP: Hash tables configured (established 65536 bind 65536)
[    0.109577] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.109606] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.109673] NET: Registered protocol family 1
[    0.109690] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.110240] PCI: CLS 64 bytes, default 64
[    0.110290] Unpacking initramfs...
[    0.504980] Freeing initrd memory: 24780K
[    0.505098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.505101] software IO TLB [mem 0xd765f000-0xdb65f000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.505807] Initialise system trusted keyrings
[    0.505879] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.507061] zbud: loaded
[    0.507291] pstore: using deflate compression
[    0.862094] Key type asymmetric registered
[    0.862096] Asymmetric key parser 'x509' registered
[    0.862141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.862176] io scheduler noop registered
[    0.862177] io scheduler deadline registered
[    0.862219] io scheduler cfq registered (default)
[    0.862220] io scheduler mq-deadline registered
[    0.862966] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.862982] intel_idle: MWAIT substates: 0x1120
[    0.862982] intel_idle: v0.4.1 model 0x25
[    0.863115] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.863407] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.864208] Linux agpgart interface v0.103
[    0.864413] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.864414] AMD IOMMUv2 functionality not available on this system
[    0.865026] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.865438] i8042: Warning: Keylock active
[    0.866696] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.866705] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.867180] mousedev: PS/2 mouse device common for all mice
[    0.867265] rtc_cmos 00:01: RTC can wake from S4
[    0.867533] rtc_cmos 00:01: registered as rtc0
[    0.867571] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.867932] ledtrig-cpu: registered to indicate activity on CPUs
[    0.868111] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.868902] NET: Registered protocol family 10
[    0.876529] Segment Routing with IPv6
[    0.876572] mip6: Mobile IPv6
[    0.876575] NET: Registered protocol family 17
[    0.876584] mpls_gso: MPLS GSO support
[    0.877299] microcode: sig=0x20655, pf=0x10, revision=0x3
[    0.877630] microcode: Microcode Update Driver: v2.2.
[    0.877663] sched_clock: Marking stable (877611828, 0)->(964681248, -87069420)
[    0.878084] registered taskstats version 1
[    0.878086] Loading compiled-in X.509 certificates
[    0.985331] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[    0.985370] zswap: loaded using pool lzo/zbud
[    0.985530] AppArmor: AppArmor sha1 policy hashing enabled
[    0.985971] rtc_cmos 00:01: setting system clock to 2018-10-21 17:08:38 UTC (1540141718)
[    0.987679] Freeing unused kernel image memory: 1548K
[    1.004418] Write protecting the kernel read-only data: 16384k
[    1.005358] Freeing unused kernel image memory: 2028K
[    1.005731] Freeing unused kernel image memory: 836K
[    1.019483] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.019484] x86/mm: Checking user space page tables
[    1.036796] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.140929] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.140930] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.141219] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.143946] ACPI: bus type USB registered
[    1.143973] usbcore: registered new interface driver usbfs
[    1.143987] usbcore: registered new interface driver hub
[    1.144148] usbcore: registered new device driver usb
[    1.145715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.146084] ehci-pci: EHCI PCI platform driver
[    1.146331] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.146341] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.146358] ehci-pci 0000:00:1a.0: debug port 2
[    1.150286] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.150307] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf6970000
[    1.150798] sdhci: Secure Digital Host Controller Interface driver
[    1.150799] sdhci: Copyright(c) Pierre Ossman
[    1.150991] SCSI subsystem initialized
[    1.152696] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.155740] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 3)
[    1.156761] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    1.158155] libata version 3.00 loaded.
[    1.158158] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[    1.160216] cryptd: max_cpu_qlen set to 1000
[    1.160471] ahci 0000:00:1f.2: version 3.0
[    1.161226] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl RAID mode
[    1.161231] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[    1.167592] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.167741] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.167743] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.167745] usb usb1: Product: EHCI Host Controller
[    1.167747] usb usb1: Manufacturer: Linux 4.18.0-2-amd64 ehci_hcd
[    1.167748] usb usb1: SerialNumber: 0000:00:1a.0
[    1.168470] hub 1-0:1.0: USB hub found
[    1.168483] hub 1-0:1.0: 2 ports detected
[    1.168549] SSE version of gcm_enc/dec engaged.
[    1.169256] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.169266] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.169282] ehci-pci 0000:00:1d.0: debug port 2
[    1.173217] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.173638] ehci-pci 0000:00:1d.0: irq 17, io mem 0xf6950000
[    1.188045] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.188214] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.188218] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.188221] usb usb2: Product: EHCI Host Controller
[    1.188224] usb usb2: Manufacturer: Linux 4.18.0-2-amd64 ehci_hcd
[    1.188227] usb usb2: SerialNumber: 0000:00:1d.0
[    1.188531] hub 2-0:1.0: USB hub found
[    1.188562] hub 2-0:1.0: 2 ports detected
[    1.200773] scsi host0: ahci
[    1.200964] scsi host1: ahci
[    1.201085] scsi host2: ahci
[    1.201206] scsi host3: ahci
[    1.201320] scsi host4: ahci
[    1.201433] scsi host5: ahci
[    1.201507] ata1: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940100 irq 25
[    1.201510] ata2: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940180 irq 25
[    1.201511] ata3: DUMMY
[    1.201512] ata4: DUMMY
[    1.201514] ata5: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940300 irq 25
[    1.201517] ata6: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940380 irq 25
[    1.232098] firewire_ohci 0000:03:00.4: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    1.392489] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:26:0a:43:bd:7f
[    1.392491] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.392562] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: 3041FF-0FF
[    1.393568] e1000e 0000:00:19.0 eno1: renamed from eth0
[    1.508082] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.515787] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.515820] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.518830] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.519586] ata5: SATA link down (SStatus 0 SControl 300)
[    1.519613] ata6: SATA link down (SStatus 0 SControl 300)
[    1.521943] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/100
[    1.521945] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32)
[    1.522875] ata1.00: ATA-9: SSD 120GB, Q0627A0, max UDMA/133
[    1.522879] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.524054] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.528238] ata2.00: configured for UDMA/100
[    1.529838] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.533914] ata1.00: configured for UDMA/133
[    1.534180] scsi 0:0:0:0: Direct-Access     ATA      SSD 120GB        7A0  PQ: 0 ANSI: 5
[    1.534556] scsi 1:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[    1.536197] tsc: Refined TSC clocksource calibration: 2659.985 MHz
[    1.536204] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x265795a50bb, max_idle_ns: 440795287017 ns
[    1.536219] clocksource: Switched to clocksource tsc
[    1.539066] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.539073] sd 0:0:0:0: [sda] Write Protect is off
[    1.539075] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.539082] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.539172] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.539174] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.539178] sd 1:0:0:0: [sdb] Write Protect is off
[    1.539179] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.539186] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.540216]  sda: sda1 sda2 < sda5 >
[    1.540736] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.664747] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[    1.664751] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.665113] hub 1-1:1.0: USB hub found
[    1.665325] hub 1-1:1.0: 6 ports detected
[    1.680450] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[    1.680455] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.680839] hub 2-1:1.0: USB hub found
[    1.681027] hub 2-1:1.0: 8 ports detected
[    1.760305] firewire_core 0000:03:00.4: created device fw0: GUID 028b8ec1334fc000, S400
[    1.951570]  sdb: sdb1 sdb2 < sdb5 >
[    1.952332] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    1.956067] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    1.968214] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[    1.981296] random: fast init done
[    2.072401] usb 1-1.4: New USB device found, idVendor=05ca, idProduct=1814, bcdDevice= 3.31
[    2.072405] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.072408] usb 1-1.4: Product: Laptop_Integrated_Webcam_3M
[    2.072410] usb 1-1.4: Manufacturer: CN06YWTK7248711N0JAV
[    2.079923] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[    2.079928] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.079930] usb 2-1.1: Product: USB Receiver
[    2.079933] usb 2-1.1: Manufacturer: Logitech
[    2.085097] hidraw: raw HID events driver (C) Jiri Kosina
[    2.089340] usbcore: registered new interface driver usbhid
[    2.089341] usbhid: USB HID core driver
[    2.091402] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C534.0001/input/input3
[    2.148369] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[    2.148701] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C534.0002/input/input4
[    2.148852] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C534.0002/input/input5
[    2.160081] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[    2.208139] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C534.0002/input/input6
[    2.208340] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[    2.270311] usb 2-1.2: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[    2.270315] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.270318] usb 2-1.2: Product: Flash Disk
[    2.270320] usb 2-1.2: Manufacturer: USB
[    2.272873] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[    2.273044] scsi host6: usb-storage 2-1.2:1.0
[    2.273219] usbcore: registered new interface driver usb-storage
[    2.274570] usbcore: registered new interface driver uas
[    2.348036] usb 2-1.7: new full-speed USB device number 5 using ehci-pci
[    2.399725] PM: Image not found (code -22)
[    2.462478] usb 2-1.7: New USB device found, idVendor=413c, idProduct=8187, bcdDevice= 5.17
[    2.462481] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.462483] usb 2-1.7: Product: DW375 Bluetooth Module
[    2.462485] usb 2-1.7: Manufacturer: Dell Computer Corp
[    2.462487] usb 2-1.7: SerialNumber: C0CB38ABD8D4
[    2.517883] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.540039] usb 2-1.8: new full-speed USB device number 6 using ehci-pci
[    2.565685] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input9
[    2.578432] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.671547] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800, bcdDevice= 1.01
[    2.671552] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.671555] usb 2-1.8: Product: 5880
[    2.671558] usb 2-1.8: Manufacturer: Broadcom Corp
[    2.671561] usb 2-1.8: SerialNumber: 0123456789ABCD
[    2.671782] usb 2-1.8: config 0 descriptor??
[    2.692042] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    2.741042] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.760332] systemd[1]: Detected architecture x86-64.
[    2.764559] systemd[1]: Set hostname to <debian>.
[    2.947446] random: systemd: uninitialized urandom read (16 bytes read)
[    2.947475] systemd[1]: Reached target Remote File Systems.
[    2.947597] random: systemd: uninitialized urandom read (16 bytes read)
[    2.949457] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.949498] random: systemd: uninitialized urandom read (16 bytes read)
[    2.949590] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.950005] systemd[1]: Created slice system-getty.slice.
[    2.950259] systemd[1]: Listening on Journal Socket.
[    2.951734] systemd[1]: Mounting POSIX Message Queue File System...
[    2.954420] systemd[1]: Starting Load Kernel Modules...
[    2.991086] lp: driver loaded but no devices found
[    2.996904] ppdev: user-space parallel port driver
[    3.002195] parport_pc 00:03: [io  0x0378-0x037b]
[    3.002331] parport_pc 00:03: [irq 5]
[    3.003774] parport_pc 00:03: activated
[    3.003777] parport_pc 00:03: reported by Plug and Play ACPI
[    3.009621] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[    3.168061] systemd-journald[280]: Received request to flush runtime journal from PID 1
[    3.191117] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10
[    3.191144] ACPI: Lid Switch [LID]
[    3.191210] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
[    3.191225] ACPI: Power Button [PBTN]
[    3.191287] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
[    3.191298] ACPI: Sleep Button [SBTN]
[    3.191356] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input13
[    3.191366] ACPI: Power Button [PWRF]
[    3.193236] ACPI: AC Adapter [AC] (on-line)
[    3.217448] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    3.237864] ACPI: Battery Slot [BAT0] (battery present)
[    3.239053] ACPI: Battery Slot [BAT1] (battery absent)
[    3.242274] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    3.242471] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[    3.242989] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    3.248267] iTCO_vendor_support: vendor-support=0
[    3.253762] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.253823] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460)
[    3.253993] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.260702] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[    3.260742] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[    3.260774] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[    3.260828] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[    3.274032] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.274080] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    3.278084] bcma: bus0: Bus registered
[    3.307318] media: Linux media interface: v0.10
[    3.344273] videodev: Linux video capture interface: v2.00
[    3.378095] pci 0000:00:00.0: Intel HD Graphics Chipset
[    3.378127] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    3.378593] pci 0000:00:00.0: detected 32768K stolen memory
[    3.378655] [drm] Replacing VGA console driver
[    3.387600] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_3M (05ca:1814)
[    3.387656] Console: switching to colour dummy device 80x25
[    3.391800] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.391803] [drm] Driver supports precise vblank timestamp query.
[    3.392655] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.401419] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[    3.401423] uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized!
[    3.401425] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[    3.401427] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[    3.401514] input: Laptop_Integrated_Webcam_3M: In as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14
[    3.401621] usbcore: registered new interface driver uvcvideo
[    3.401623] USB Video Class driver (1.1.1)
[    3.432042] scsi 6:0:0:0: Direct-Access     USB      Flash Disk       1100 PQ: 0 ANSI: 4
[    3.450388] Bluetooth: Core ver 2.22
[    3.450407] NET: Registered protocol family 31
[    3.450408] Bluetooth: HCI device and connection manager initialized
[    3.450412] Bluetooth: HCI socket layer initialized
[    3.450415] Bluetooth: L2CAP socket layer initialized
[    3.450423] Bluetooth: SCO socket layer initialized
[    3.456932] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    3.472502] usbcore: registered new interface driver btusb
[    3.472643] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.473884] sd 6:0:0:0: [sdc] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB)
[    3.474876] sd 6:0:0:0: [sdc] Write Protect is off
[    3.474879] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    3.475878] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.483266]  sdc: sdc1
[    3.483953] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    3.488538] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    3.489429] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[    3.500596] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input15
[    3.510394] [drm] RC6 disabled, disabling runtime PM support
[    3.515170] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    3.521069] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[    3.632754] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[    3.632768] b43: probe of bcma0:1 failed with error -524
[    3.632789] Broadcom 43xx driver loaded [ Features: PNLS ]
[    3.636393] acpi device:3f: registered as cooling_device5
[    3.637132] dell_laptop: Using i8042 filter function for receiving events
[    3.637650] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input16
[    3.637913] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.654569] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 17
[    3.659563] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1C5: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
[    3.659567] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    3.659569] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    3.659570] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    3.659572] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    3.659574] snd_hda_codec_idt hdaudioC0D0:      Dock Mic=0xf
[    3.659576] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    3.659578] snd_hda_codec_idt hdaudioC0D0:      Mic=0xa
[    3.659817] fbcon: inteldrmfb (fb0) is primary device
[    3.663245] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.670183] brcmsmac bcma0:1 wlp2s0b1: renamed from wlan0
[    3.674242] dell_wmi: Unknown key with type 0x0011 and code 0xffd0 pressed
[    3.674243] dell_wmi: Unknown key with type 0x0011 and code 0xffd0 pressed
[    3.691492] Adding 8310780k swap on /dev/sda5.  Priority:-2 extents:1 across:8310780k SSFS
[    3.718358] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    3.719170] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    3.719246] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    3.719313] input: HDA Intel MID Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[    3.719377] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    3.719446] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    3.719512] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[    3.922095] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    4.007148] audit: type=1400 audit(1540134521.517:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=492 comm="apparmor_parser"
[    4.008086] audit: type=1400 audit(1540134521.521:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=493 comm="apparmor_parser"
[    4.008090] audit: type=1400 audit(1540134521.521:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd//qemu_bridge_helper" pid=493 comm="apparmor_parser"
[    4.013141] audit: type=1400 audit(1540134521.525:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=495 comm="apparmor_parser"
[    4.013997] audit: type=1400 audit(1540134521.525:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=497 comm="apparmor_parser"
[    4.014004] audit: type=1400 audit(1540134521.525:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=497 comm="apparmor_parser"
[    4.014007] audit: type=1400 audit(1540134521.525:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=497 comm="apparmor_parser"
[    4.015202] audit: type=1400 audit(1540134521.525:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=498 comm="apparmor_parser"
[    4.018404] audit: type=1400 audit(1540134521.529:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=496 comm="apparmor_parser"
[    4.467726] random: crng init done
[    4.467728] random: 7 urandom warning(s) missed due to ratelimiting
[    4.547125] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.547127] Bluetooth: BNEP filters: protocol multicast
[    4.547133] Bluetooth: BNEP socket layer initialized
[    5.216319] Console: switching to colour frame buffer device 180x56
[    5.229926] dell_wmi: Unknown key with type 0x0011 and code 0xffd1 pressed
[    5.237871] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.411680] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[    5.636267] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[    5.641728] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    5.643024] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx-0.fw
[    5.643610] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[    5.712598] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[    5.712612] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[    5.712874] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    5.796586] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[    5.796598] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[    5.796753] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    5.897525] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    6.804176] fuse init (API version 7.27)
[    8.544095] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[   11.110632] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   11.110646] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   11.110844] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   13.488795] Bluetooth: RFCOMM TTY layer initialized
[   13.488804] Bluetooth: RFCOMM socket layer initialized
[   13.488812] Bluetooth: RFCOMM ver 1.11
[   17.941002] wlp2s0b1: authenticate with b8:62:1f:50:76:24
[   17.943800] wlp2s0b1: send auth to b8:62:1f:50:76:24 (try 1/3)
[   17.946973] wlp2s0b1: authenticated
[   17.947986] wlp2s0b1: associate with b8:62:1f:50:76:24 (try 1/3)
[   17.951692] wlp2s0b1: RX AssocResp from b8:62:1f:50:76:24 (capab=0x411 status=0 aid=1)
[   17.952518] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[   17.952524] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   17.952538] wlp2s0b1: associated
[   17.957177] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 159/256 dur 1778/1504
[   17.965600] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 137/256 dur 1602/1504
[   17.977411] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[   17.985338] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[   18.082574] Guest personality initialized and is inactive
[   18.082654] VMCI host device registered (name=vmci, major=10, minor=56)
[   18.082655] Initialized host personality
[   18.116350] NET: Registered protocol family 40
[   50.015160] pci_bus 0000:0b: Allocating resources
[   50.015184] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[   50.015191] pci 0000:00:1e.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[   50.015198] pci 0000:00:1e.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[   50.015221] pci 0000:00:1e.0: BAR 14: assigned [mem 0xf7200000-0xf73fffff]
[   50.015235] pci 0000:00:1e.0: BAR 15: assigned [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.015246] pci 0000:00:1e.0: BAR 13: assigned [io  0x8000-0x8fff]
[   50.015258] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.015265] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.015275] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.015284] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.026990] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.026996] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027007] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027012] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.027047] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.027051] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027056] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027060] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.027347] pci_bus 0000:01: Allocating resources
[   50.027367] pci_bus 0000:02: Allocating resources
[   50.027391] pci_bus 0000:03: Allocating resources
[   50.027467] pci_bus 0000:05: Allocating resources
[   50.027482] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.027486] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027492] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027496] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.027529] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.027533] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027539] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027544] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.027636] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.027641] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027647] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027653] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.027715] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.027719] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027726] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027731] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.027847] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.027851] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027856] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027861] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.036345] dell_wmi: Unknown key with type 0x0011 and code 0xffd0 pressed
[   50.577343] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 0 addresses (implement)
[   50.577708] wlp2s0b1: deauthenticating from b8:62:1f:50:76:24 by local choice (Reason: 3=DEAUTH_LEAVING)
[   50.582695] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[   50.582703] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   50.671476] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   50.671492] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   50.671683] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   50.721740] PM: suspend entry (deep)
[   50.721743] PM: Syncing filesystems ... done.
[   50.886474] (NULL device *): firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[   50.886516] (NULL device *): firmware: direct-loading firmware brcm/bcm43xx-0.fw
[   50.886531] Freezing user space processes ... (elapsed 0.335 seconds) done.
[   51.222858] OOM killer disabled.
[   51.222859] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   51.224122] Suspending console(s) (use no_console_suspend to debug)
[   51.238918] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   51.238960] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[   51.238980] sd 6:0:0:0: [sdc] Synchronizing SCSI cache
[   51.239028] sd 0:0:0:0: [sda] Stopping disk
[   51.239036] sd 1:0:0:0: [sdb] Stopping disk
[   51.240936] e1000e: EEE TX LPI TIMER: 00000000
[   52.359377] ACPI: EC: interrupt blocked
[   52.379208] ACPI: Preparing to enter system sleep state S3
[   52.382436] ACPI: EC: event blocked
[   52.382437] ACPI: EC: EC stopped
[   52.382438] PM: Saving platform NVS memory
[   52.382459] Disabling non-boot CPUs ...
[   52.395411] IRQ 26: no longer affine to CPU1
[   52.396429] smpboot: CPU 1 is now offline
[   52.419449] IRQ 17: no longer affine to CPU2
[   52.420685] smpboot: CPU 2 is now offline
[   52.452512] smpboot: CPU 3 is now offline
[   52.456720] ACPI: Low-level resume complete
[   52.456781] ACPI: EC: EC started
[   52.456781] PM: Restoring platform NVS memory
[   52.457163] Enabling non-boot CPUs ...
[   52.457220] x86: Booting SMP configuration:
[   52.457221] smpboot: Booting Node 0 Processor 1 APIC 0x4
[   52.459652]  cache: parent cpu1 should not be sleeping
[   52.459976] CPU1 is up
[   52.460011] smpboot: Booting Node 0 Processor 2 APIC 0x1
[   52.462346]  cache: parent cpu2 should not be sleeping
[   52.462693] CPU2 is up
[   52.462731] smpboot: Booting Node 0 Processor 3 APIC 0x5
[   52.465072]  cache: parent cpu3 should not be sleeping
[   52.465442] CPU3 is up
[   52.467407] ACPI: Waking up from system sleep state S3
[   52.480520] ACPI: EC: interrupt unblocked
[   52.501169] sdhci-pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
[   52.503540] ACPI: EC: event unblocked
[   52.505826] sd 0:0:0:0: [sda] Starting disk
[   52.505828] sd 1:0:0:0: [sdb] Starting disk
[   52.537679] dell_wmi: Unknown key with type 0x0011 and code 0xffd0 pressed
[   52.749162] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[   52.765295] usb 2-1.7: reset full-speed USB device number 5 using ehci-pci
[   52.860408] ata5: SATA link down (SStatus 0 SControl 300)
[   52.860480] ata6: SATA link down (SStatus 0 SControl 300)
[   52.860515] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   52.946655] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[   52.957640] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[   52.957765] usb 2-1.2: reset high-speed USB device number 4 using ehci-pci
[   52.961680] ata1.00: configured for UDMA/133
[   53.005979] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   53.018486] ata2.00: configured for UDMA/100
[   53.082183] firewire_core 0000:03:00.4: rediscovered device fw0
[   53.146364] usb 2-1.1: reset full-speed USB device number 3 using ehci-pci
[   53.297109] OOM killer enabled.
[   53.297110] Restarting tasks ...
[   53.297195] pci_bus 0000:0b: Allocating resources
[   53.297222] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.297226] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.297231] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.297236] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.303941] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.303947] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.303953] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.303957] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.303989] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.303992] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.303997] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.304002] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.304309] pci_bus 0000:01: Allocating resources
[   53.304327] pci_bus 0000:02: Allocating resources
[   53.304348] pci_bus 0000:03: Allocating resources
[   53.304416] pci_bus 0000:05: Allocating resources
[   53.304431] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.304434] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.304438] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.304442] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.304473] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.304476] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.304481] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.304485] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.304568] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.304572] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.304578] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.304581] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.304637] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.304641] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.304646] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.304651] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.304758] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.304761] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.304766] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.304770] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.306100] acpi PNP0401:00: Already enumerated
[   53.306670] done.
[   53.323562] acpi PNP0501:01: Still not present
[   53.420600] video LNXVIDEO:01: Restoring backlight state
[   53.442816] PM: suspend exit
[   53.700359] dell_wmi: Unknown key with type 0x0011 and code 0xffd1 pressed
[   53.730796] e1000e: eno1 NIC Link is Down
[   53.733808] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   53.956890] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   53.958717] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   54.028874] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   54.028893] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   54.029153] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   54.097470] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   55.031253] wlp2s0b1: authenticate with b8:62:1f:50:76:24
[   55.031352] wlp2s0b1: send auth to b8:62:1f:50:76:24 (try 1/3)
[   55.032868] wlp2s0b1: authenticated
[   55.035512] wlp2s0b1: associate with b8:62:1f:50:76:24 (try 1/3)
[   55.039202] wlp2s0b1: RX AssocResp from b8:62:1f:50:76:24 (capab=0x411 status=0 aid=1)
[   55.039822] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[   55.039830] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   55.039840] wlp2s0b1: associated
[   55.052493] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 159/256 dur 1778/1504
[   55.061171] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 137/256 dur 1602/1504
[   55.061637] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[   55.072097] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[/code]
korbielow
 
Posts: 35
Joined: 2014-12-21 11:24
Location: POLAND

Re: xfce4-power-manager not working

Postby korbielow » 2018-10-21 14:44

Code: Select all
[    0.000000] Linux version 4.18.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-29)) #1 SMP Debian 4.18.10-2 (2018-10-07)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=UUID=2d18adb9-81e4-4ad9-92c3-3e1870e31ddf ro quiet
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc. Latitude E6410/0667CC, BIOS A17 05/12/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 100000000 mask F00000000 write-back
[    0.000000]   5 base 200000000 mask FE0000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: update [mem 0xdc000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xdb65f max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f2210-0x000f221f] mapped at [(____ptrval____)]
[    0.000000] Base memory trampoline at [(____ptrval____)] 8f000 size 24576
[    0.000000] BRK [0xd2c4b000, 0xd2c4bfff] PGTABLE
[    0.000000] BRK [0xd2c4c000, 0xd2c4cfff] PGTABLE
[    0.000000] BRK [0xd2c4d000, 0xd2c4dfff] PGTABLE
[    0.000000] BRK [0xd2c4e000, 0xd2c4efff] PGTABLE
[    0.000000] BRK [0xd2c4f000, 0xd2c4ffff] PGTABLE
[    0.000000] BRK [0xd2c50000, 0xd2c50fff] PGTABLE
[    0.000000] BRK [0xd2c51000, 0xd2c51fff] PGTABLE
[    0.000000] BRK [0xd2c52000, 0xd2c52fff] PGTABLE
[    0.000000] BRK [0xd2c53000, 0xd2c53fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34f89000-0x367bbfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE300 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000DB67DE18 000064 (v01 DELL   E2       06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 0x00000000DB75FC18 0000F4 (v04 DELL   E2       06222004 MSFT 00010013)
[    0.000000] ACPI: DSDT 0x00000000DB73E018 00A24F (v01 DELL   E2       00001001 INTL 20080729)
[    0.000000] ACPI: FACS 0x00000000DB76BF40 000040
[    0.000000] ACPI: FACS 0x00000000DB76ED40 000040
[    0.000000] ACPI: APIC 0x00000000DB67CF18 00008C (v02 DELL   E2       06222004 MSFT 00010013)
[    0.000000] ACPI: TCPA 0x00000000DB76DD18 000032 (v02                 00000000      00000000)
[    0.000000] ACPI: MCFG 0x00000000DB76DC98 00003C (v01 A M I  GMCH945. 06222004 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DB76DC18 000038 (v01 DELL   E2       00000001 ASL  00000061)
[    0.000000] ACPI: BOOT 0x00000000DB76DB98 000028 (v01 DELL   E2       06222004 AMI  00010013)
[    0.000000] ACPI: SLIC 0x00000000DB766818 000176 (v03 DELL   E2       06222004 MSFT 00010013)
[    0.000000] ACPI: SSDT 0x00000000DB74D018 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20080729)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21fff7000-0x21fffbfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000094fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000db65efff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021fffffff]
[    0.000000] Reserved but unavailable: 18957 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
[    0.000000] On node 0 totalpages: 2078195
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3988 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13978 pages used for memmap
[    0.000000]   DMA32 zone: 894559 pages, LIFO batch:31
[    0.000000]   Normal zone: 18432 pages used for memmap
[    0.000000]   Normal zone: 1179648 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0xde000000-0xdfffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00095000-0x00095fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00096000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb65f000-0xdb67efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb67f000-0xdb76efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb76f000-0xdbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdddfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdde00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x52e with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u262144
[    0.000000] pcpu-alloc: s142744 r8192 d29288 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2045700
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=UUID=2d18adb9-81e4-4ad9-92c3-3e1870e31ddf ro quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area

[    0.032000] Hierarchical SRCU implementation.
[    0.032000] smp: Bringing up secondary CPUs ...
[    0.032000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.032000] x86: Booting SMP configuration:
[    0.032000] .... node  #0, CPUs:      #1 #2 #3
[    0.036088] smp: Brought up 1 node, 4 CPUs
[    0.036088] smpboot: Max logical packages: 2
[    0.036088] smpboot: Total of 4 processors activated (21278.77 BogoMIPS)
[    0.037966] devtmpfs: initialized
[    0.037966] x86/mm: Memory block size: 128MB
[    0.037966] PM: Registering ACPI NVS region [mem 0xdb67f000-0xdb76efff] (983040 bytes)
[    0.037966] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040013] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.040084] pinctrl core: initialized pinctrl subsystem
[    0.040266] NET: Registered protocol family 16
[    0.040345] audit: initializing netlink subsys (disabled)
[    0.040353] audit: type=2000 audit(1540141717.040:1): state=initialized audit_enabled=0 res=1
[    0.040353] cpuidle: using governor ladder
[    0.040353] cpuidle: using governor menu
[    0.040353] Simple Boot Flag at 0xf1 set to 0x1
[    0.040353] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.040353] ACPI: bus type PCI registered
[    0.040353] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040353] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.040353] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820

[    0.056896] ACPI: EC: interrupt blocked
[    0.060355] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[    0.060355] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.060355] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[    0.060355] ACPI: Interpreter enabled
[    0.060355] ACPI: (supports S0 S3 S4 S5)
[    0.060355] ACPI: Using IOAPIC for interrupt routing
[    0.060355] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.060355] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.072681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.072681] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.072711] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM

[    0.080423] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.080470] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.080518] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.080564] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.084062] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[    0.084066] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.084069] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.084133] PCI host bridge to bus 0000:3f
[    0.084135] pci_bus 0000:3f: root bus resource [bus 3f]
[    0.084140] pci 0000:3f:00.0: [8086:2c62] type 00 class 0x060000
[    0.084183] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
[    0.084228] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
[    0.084266] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
[    0.084304] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
[    0.084342] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
[    0.084799] ACPI: EC: interrupt unblocked
[    0.084799] ACPI: EC: event unblocked
[    0.084799] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.084799] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[    0.084799] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.084799] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.084799] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.084799] vgaarb: loaded
[    0.084799] pps_core: LinuxPPS API ver. 1 registered
[    0.084799] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.084799] PTP clock support registered
[    0.084799] EDAC MC: Ver: 3.0.0
[    0.084799] PCI: Using ACPI for IRQ routing
[    0.085658] PCI: pci_cache_line_size set to 64 bytes
[    0.085843] e820: reserve RAM buffer [mem 0x00095c00-0x0009ffff]
[    0.085844] e820: reserve RAM buffer [mem 0xdb65f000-0xdbffffff]
[    0.088048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.088053] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.088053] clocksource: Switched to clocksource tsc-early
[    0.098592] VFS: Disk quotas dquot_6.6.0
[    0.098613] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.098732] AppArmor: AppArmor Filesystem Enabled
[    0.098754] pnp: PnP ACPI init
[    0.098964] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.098966] system 00:00: [io  0x1000-0x1003] has been reserved
[    0.098968] system 00:00: [io  0x1004-0x1013] has been reserved
[    0.098969] system 00:00: [io  0xffff] has been reserved
[    0.098971] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.098972] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.098974] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.098980] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.099005] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.099027] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.100456] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (disabled)
[    0.100477] pnp 00:04: Plug and Play ACPI device, IDs DLL040a PNP0f13 (active)
[    0.100686] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.100688] system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.100689] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.100691] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.100694] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.100696] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.100697] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.100699] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.100701] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.100702] system 00:05: [mem 0xf69c0000-0xf69c0fff] has been reserved
[    0.100706] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.102984] pnp: PnP ACPI: found 6 devices
[    0.108726] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.108746] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.108756] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.108767] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-04] add_size 200000 add_align 100000
[    0.108777] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-0a] add_size 200000 add_align 100000
[    0.108797] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6a00000-0xf6bfffff 64bit pref]
[    0.108800] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6c00000-0xf6dfffff 64bit pref]
[    0.108804] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf6e00000-0xf6ffffff 64bit pref]
[    0.108807] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf7000000-0xf71fffff 64bit pref]
[    0.108810] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.108814] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    0.108819] pci 0000:00:1c.0:   bridge window [mem 0xf5500000-0xf68fffff]
[    0.108823] pci 0000:00:1c.0:   bridge window [mem 0xf6a00000-0xf6bfffff 64bit pref]
[    0.108830] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.108833] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.108838] pci 0000:00:1c.1:   bridge window [mem 0xf4100000-0xf54fffff]
[    0.108843] pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6dfffff 64bit pref]
[    0.108849] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[    0.108852] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
[    0.108858] pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf2cfffff]
[    0.108862] pci 0000:00:1c.2:   bridge window [mem 0xf6e00000-0xf6ffffff 64bit pref]
[    0.108868] pci 0000:00:1c.3: PCI bridge to [bus 05-0a]
[    0.108871] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.108877] pci 0000:00:1c.3:   bridge window [mem 0xf2d00000-0xf40fffff]
[    0.108881] pci 0000:00:1c.3:   bridge window [mem 0xf7000000-0xf71fffff 64bit pref]
[    0.108888] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[    0.108903] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.108904] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.108906] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.108907] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff window]
[    0.108909] pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
[    0.108910] pci_bus 0000:01: resource 1 [mem 0xf5500000-0xf68fffff]
[    0.108911] pci_bus 0000:01: resource 2 [mem 0xf6a00000-0xf6bfffff 64bit pref]
[    0.108912] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.108914] pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf54fffff]
[    0.108915] pci_bus 0000:02: resource 2 [mem 0xf6c00000-0xf6dfffff 64bit pref]
[    0.108916] pci_bus 0000:03: resource 0 [io  0x2000-0x3fff]
[    0.108917] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf2cfffff]
[    0.108919] pci_bus 0000:03: resource 2 [mem 0xf6e00000-0xf6ffffff 64bit pref]
[    0.108920] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.108921] pci_bus 0000:05: resource 1 [mem 0xf2d00000-0xf40fffff]
[    0.108922] pci_bus 0000:05: resource 2 [mem 0xf7000000-0xf71fffff 64bit pref]
[    0.108924] pci_bus 0000:0b: resource 4 [io  0x0000-0x0cf7 window]
[    0.108925] pci_bus 0000:0b: resource 5 [io  0x0d00-0xffff window]
[    0.108927] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.108928] pci_bus 0000:0b: resource 7 [mem 0xe0000000-0xfeafffff window]
[    0.109014] NET: Registered protocol family 2
[    0.109173] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.109205] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.109340] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.109523] TCP: Hash tables configured (established 65536 bind 65536)
[    0.109577] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.109606] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.109673] NET: Registered protocol family 1
[    0.109690] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.110240] PCI: CLS 64 bytes, default 64
[    0.110290] Unpacking initramfs...
[    0.504980] Freeing initrd memory: 24780K
[    0.505098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.505101] software IO TLB [mem 0xd765f000-0xdb65f000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.505807] Initialise system trusted keyrings
[    0.505879] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.507061] zbud: loaded
[    0.507291] pstore: using deflate compression
[    0.862094] Key type asymmetric registered
[    0.862096] Asymmetric key parser 'x509' registered
[    0.862141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.862176] io scheduler noop registered
[    0.862177] io scheduler deadline registered
[    0.862219] io scheduler cfq registered (default)
[    0.862220] io scheduler mq-deadline registered
[    0.862966] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.862982] intel_idle: MWAIT substates: 0x1120
[    0.862982] intel_idle: v0.4.1 model 0x25
[    0.863115] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.863407] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.864208] Linux agpgart interface v0.103
[    0.864413] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.864414] AMD IOMMUv2 functionality not available on this system
[    0.865026] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.865438] i8042: Warning: Keylock active
[    0.866696] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.866705] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.867180] mousedev: PS/2 mouse device common for all mice
[    0.867265] rtc_cmos 00:01: RTC can wake from S4
[    0.867533] rtc_cmos 00:01: registered as rtc0
[    0.867571] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.867932] ledtrig-cpu: registered to indicate activity on CPUs
[    0.868111] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.868902] NET: Registered protocol family 10
[    0.876529] Segment Routing with IPv6
[    0.876572] mip6: Mobile IPv6
[    0.876575] NET: Registered protocol family 17
[    0.876584] mpls_gso: MPLS GSO support
[    0.877299] microcode: sig=0x20655, pf=0x10, revision=0x3
[    0.877630] microcode: Microcode Update Driver: v2.2.
[    0.877663] sched_clock: Marking stable (877611828, 0)->(964681248, -87069420)
[    0.878084] registered taskstats version 1
[    0.878086] Loading compiled-in X.509 certificates
[    0.985331] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[    0.985370] zswap: loaded using pool lzo/zbud
[    0.985530] AppArmor: AppArmor sha1 policy hashing enabled
[    0.985971] rtc_cmos 00:01: setting system clock to 2018-10-21 17:08:38 UTC (1540141718)
[    0.987679] Freeing unused kernel image memory: 1548K
[    1.004418] Write protecting the kernel read-only data: 16384k
[    1.005358] Freeing unused kernel image memory: 2028K
[    1.005731] Freeing unused kernel image memory: 836K
[    1.019483] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.019484] x86/mm: Checking user space page tables
[    1.036796] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.140929] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.140930] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.141219] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.143946] ACPI: bus type USB registered
[    1.143973] usbcore: registered new interface driver usbfs
[    1.143987] usbcore: registered new interface driver hub
[    1.144148] usbcore: registered new device driver usb
[    1.145715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.146084] ehci-pci: EHCI PCI platform driver
[    1.146331] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.146341] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.146358] ehci-pci 0000:00:1a.0: debug port 2
[    1.150286] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.150307] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf6970000
[    1.150798] sdhci: Secure Digital Host Controller Interface driver
[    1.150799] sdhci: Copyright(c) Pierre Ossman
[    1.150991] SCSI subsystem initialized
[    1.152696] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.155740] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 3)
[    1.156761] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    1.158155] libata version 3.00 loaded.
[    1.158158] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[    1.160216] cryptd: max_cpu_qlen set to 1000
[    1.160471] ahci 0000:00:1f.2: version 3.0
[    1.161226] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl RAID mode
[    1.161231] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[    1.167592] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.167741] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.167743] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.167745] usb usb1: Product: EHCI Host Controller
[    1.167747] usb usb1: Manufacturer: Linux 4.18.0-2-amd64 ehci_hcd
[    1.167748] usb usb1: SerialNumber: 0000:00:1a.0
[    1.168470] hub 1-0:1.0: USB hub found
[    1.168483] hub 1-0:1.0: 2 ports detected
[    1.168549] SSE version of gcm_enc/dec engaged.
[    1.169256] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.169266] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.169282] ehci-pci 0000:00:1d.0: debug port 2
[    1.173217] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.173638] ehci-pci 0000:00:1d.0: irq 17, io mem 0xf6950000
[    1.188045] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.188214] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.188218] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.188221] usb usb2: Product: EHCI Host Controller
[    1.188224] usb usb2: Manufacturer: Linux 4.18.0-2-amd64 ehci_hcd
[    1.188227] usb usb2: SerialNumber: 0000:00:1d.0
[    1.188531] hub 2-0:1.0: USB hub found
[    1.188562] hub 2-0:1.0: 2 ports detected
[    1.200773] scsi host0: ahci
[    1.200964] scsi host1: ahci
[    1.201085] scsi host2: ahci
[    1.201206] scsi host3: ahci
[    1.201320] scsi host4: ahci
[    1.201433] scsi host5: ahci
[    1.201507] ata1: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940100 irq 25
[    1.201510] ata2: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940180 irq 25
[    1.201511] ata3: DUMMY
[    1.201512] ata4: DUMMY
[    1.201514] ata5: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940300 irq 25
[    1.201517] ata6: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940380 irq 25
[    1.232098] firewire_ohci 0000:03:00.4: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    1.392489] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:26:0a:43:bd:7f
[    1.392491] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.392562] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: 3041FF-0FF
[    1.393568] e1000e 0000:00:19.0 eno1: renamed from eth0
[    1.508082] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.515787] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.515820] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.518830] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.519586] ata5: SATA link down (SStatus 0 SControl 300)
[    1.519613] ata6: SATA link down (SStatus 0 SControl 300)
[    1.521943] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/100
[    1.521945] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32)
[    1.522875] ata1.00: ATA-9: SSD 120GB, Q0627A0, max UDMA/133
[    1.522879] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.524054] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.528238] ata2.00: configured for UDMA/100
[    1.529838] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.533914] ata1.00: configured for UDMA/133
[    1.534180] scsi 0:0:0:0: Direct-Access     ATA      SSD 120GB        7A0  PQ: 0 ANSI: 5
[    1.534556] scsi 1:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[    1.536197] tsc: Refined TSC clocksource calibration: 2659.985 MHz
[    1.536204] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x265795a50bb, max_idle_ns: 440795287017 ns
[    1.536219] clocksource: Switched to clocksource tsc
[    1.539066] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.539073] sd 0:0:0:0: [sda] Write Protect is off
[    1.539075] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.539082] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.539172] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.539174] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.539178] sd 1:0:0:0: [sdb] Write Protect is off
[    1.539179] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.539186] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.540216]  sda: sda1 sda2 < sda5 >
[    1.540736] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.664747] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[    1.664751] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.665113] hub 1-1:1.0: USB hub found
[    1.665325] hub 1-1:1.0: 6 ports detected
[    1.680450] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[    1.680455] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.680839] hub 2-1:1.0: USB hub found
[    1.681027] hub 2-1:1.0: 8 ports detected
[    1.760305] firewire_core 0000:03:00.4: created device fw0: GUID 028b8ec1334fc000, S400
[    1.951570]  sdb: sdb1 sdb2 < sdb5 >
[    1.952332] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    1.956067] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    1.968214] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[    1.981296] random: fast init done
[    2.072401] usb 1-1.4: New USB device found, idVendor=05ca, idProduct=1814, bcdDevice= 3.31
[    2.072405] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.072408] usb 1-1.4: Product: Laptop_Integrated_Webcam_3M
[    2.072410] usb 1-1.4: Manufacturer: CN06YWTK7248711N0JAV
[    2.079923] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[    2.079928] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.079930] usb 2-1.1: Product: USB Receiver
[    2.079933] usb 2-1.1: Manufacturer: Logitech
[    2.085097] hidraw: raw HID events driver (C) Jiri Kosina
[    2.089340] usbcore: registered new interface driver usbhid
[    2.089341] usbhid: USB HID core driver
[    2.091402] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C534.0001/input/input3
[    2.148369] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[    2.148701] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C534.0002/input/input4
[    2.148852] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C534.0002/input/input5
[    2.160081] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[    2.208139] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C534.0002/input/input6
[    2.208340] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[    2.270311] usb 2-1.2: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[    2.270315] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.270318] usb 2-1.2: Product: Flash Disk
[    2.270320] usb 2-1.2: Manufacturer: USB
[    2.272873] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[    2.273044] scsi host6: usb-storage 2-1.2:1.0
[    2.273219] usbcore: registered new interface driver usb-storage
[    2.274570] usbcore: registered new interface driver uas
[    2.348036] usb 2-1.7: new full-speed USB device number 5 using ehci-pci
[    2.399725] PM: Image not found (code -22)
[    2.462478] usb 2-1.7: New USB device found, idVendor=413c, idProduct=8187, bcdDevice= 5.17
[    2.462481] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.462483] usb 2-1.7: Product: DW375 Bluetooth Module
[    2.462485] usb 2-1.7: Manufacturer: Dell Computer Corp
[    2.462487] usb 2-1.7: SerialNumber: C0CB38ABD8D4
[    2.517883] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.540039] usb 2-1.8: new full-speed USB device number 6 using ehci-pci
[    2.565685] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input9
[    2.578432] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.671547] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800, bcdDevice= 1.01
[    2.671552] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.671555] usb 2-1.8: Product: 5880
[    2.671558] usb 2-1.8: Manufacturer: Broadcom Corp
[    2.671561] usb 2-1.8: SerialNumber: 0123456789ABCD
[    2.671782] usb 2-1.8: config 0 descriptor??
[    2.692042] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    2.741042] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.760332] systemd[1]: Detected architecture x86-64.
[    2.764559] systemd[1]: Set hostname to <debian>.
[    2.947446] random: systemd: uninitialized urandom read (16 bytes read)
[    2.947475] systemd[1]: Reached target Remote File Systems.
[    2.947597] random: systemd: uninitialized urandom read (16 bytes read)
[    2.949457] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.949498] random: systemd: uninitialized urandom read (16 bytes read)
[    2.949590] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.950005] systemd[1]: Created slice system-getty.slice.
[    2.950259] systemd[1]: Listening on Journal Socket.
[    2.951734] systemd[1]: Mounting POSIX Message Queue File System...
[    2.954420] systemd[1]: Starting Load Kernel Modules...
[    2.991086] lp: driver loaded but no devices found
[    2.996904] ppdev: user-space parallel port driver
[    3.002195] parport_pc 00:03: [io  0x0378-0x037b]
[    3.002331] parport_pc 00:03: [irq 5]
[    3.003774] parport_pc 00:03: activated
[    3.003777] parport_pc 00:03: reported by Plug and Play ACPI
[    3.009621] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[    3.168061] systemd-journald[280]: Received request to flush runtime journal from PID 1
[    3.191117] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10
[    3.191144] ACPI: Lid Switch [LID]
[    3.191210] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
[    3.191225] ACPI: Power Button [PBTN]
[    3.191287] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
[    3.191298] ACPI: Sleep Button [SBTN]
[    3.191356] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input13
[    3.191366] ACPI: Power Button [PWRF]
[    3.193236] ACPI: AC Adapter [AC] (on-line)
[    3.217448] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    3.237864] ACPI: Battery Slot [BAT0] (battery present)
[    3.239053] ACPI: Battery Slot [BAT1] (battery absent)
[    3.242274] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    3.242471] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[    3.242989] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    3.248267] iTCO_vendor_support: vendor-support=0
[    3.253762] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.253823] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460)
[    3.253993] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.260702] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[    3.260742] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[    3.260774] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[    3.260828] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[    3.274032] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.274080] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    3.278084] bcma: bus0: Bus registered
[    3.307318] media: Linux media interface: v0.10
[    3.344273] videodev: Linux video capture interface: v2.00
[    3.378095] pci 0000:00:00.0: Intel HD Graphics Chipset
[    3.378127] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    3.378593] pci 0000:00:00.0: detected 32768K stolen memory
[    3.378655] [drm] Replacing VGA console driver
[    3.387600] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_3M (05ca:1814)
[    3.387656] Console: switching to colour dummy device 80x25
[    3.391800] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.391803] [drm] Driver supports precise vblank timestamp query.
[    3.392655] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.401419] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[    3.401423] uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized!
[    3.401425] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[    3.401427] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[    3.401514] input: Laptop_Integrated_Webcam_3M: In as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14
[    3.401621] usbcore: registered new interface driver uvcvideo
[    3.401623] USB Video Class driver (1.1.1)
[    3.432042] scsi 6:0:0:0: Direct-Access     USB      Flash Disk       1100 PQ: 0 ANSI: 4
[    3.450388] Bluetooth: Core ver 2.22
[    3.450407] NET: Registered protocol family 31
[    3.450408] Bluetooth: HCI device and connection manager initialized
[    3.450412] Bluetooth: HCI socket layer initialized
[    3.450415] Bluetooth: L2CAP socket layer initialized
[    3.450423] Bluetooth: SCO socket layer initialized
[    3.456932] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    3.472502] usbcore: registered new interface driver btusb
[    3.472643] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.473884] sd 6:0:0:0: [sdc] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB)
[    3.474876] sd 6:0:0:0: [sdc] Write Protect is off
[    3.474879] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    3.475878] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.483266]  sdc: sdc1
[    3.483953] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    3.488538] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    3.489429] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[    3.500596] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input15
[    3.510394] [drm] RC6 disabled, disabling runtime PM support
[    3.515170] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    3.521069] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[    3.632754] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[    3.632768] b43: probe of bcma0:1 failed with error -524
[    3.632789] Broadcom 43xx driver loaded [ Features: PNLS ]
[    3.636393] acpi device:3f: registered as cooling_device5
[    3.637132] dell_laptop: Using i8042 filter function for receiving events
[    3.637650] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input16
[    3.637913] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.654569] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 17
[    3.659563] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1C5: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
[    3.659567] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    3.659569] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    3.659570] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    3.659572] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    3.659574] snd_hda_codec_idt hdaudioC0D0:      Dock Mic=0xf
[    3.659576] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    3.659578] snd_hda_codec_idt hdaudioC0D0:      Mic=0xa
[    3.659817] fbcon: inteldrmfb (fb0) is primary device
[    3.663245] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.670183] brcmsmac bcma0:1 wlp2s0b1: renamed from wlan0
[    3.674242] dell_wmi: Unknown key with type 0x0011 and code 0xffd0 pressed
[    3.674243] dell_wmi: Unknown key with type 0x0011 and code 0xffd0 pressed
[    3.691492] Adding 8310780k swap on /dev/sda5.  Priority:-2 extents:1 across:8310780k SSFS
[    3.718358] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    3.719170] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    3.719246] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    3.719313] input: HDA Intel MID Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[    3.719377] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    3.719446] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    3.719512] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[    3.922095] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    4.007148] audit: type=1400 audit(1540134521.517:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=492 comm="apparmor_parser"
[    4.008086] audit: type=1400 audit(1540134521.521:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=493 comm="apparmor_parser"
[    4.008090] audit: type=1400 audit(1540134521.521:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd//qemu_bridge_helper" pid=493 comm="apparmor_parser"
[    4.013141] audit: type=1400 audit(1540134521.525:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=495 comm="apparmor_parser"
[    4.013997] audit: type=1400 audit(1540134521.525:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=497 comm="apparmor_parser"
[    4.014004] audit: type=1400 audit(1540134521.525:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=497 comm="apparmor_parser"
[    4.014007] audit: type=1400 audit(1540134521.525:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=497 comm="apparmor_parser"
[    4.015202] audit: type=1400 audit(1540134521.525:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=498 comm="apparmor_parser"
[    4.018404] audit: type=1400 audit(1540134521.529:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=496 comm="apparmor_parser"
[    4.467726] random: crng init done
[    4.467728] random: 7 urandom warning(s) missed due to ratelimiting
[    4.547125] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.547127] Bluetooth: BNEP filters: protocol multicast
[    4.547133] Bluetooth: BNEP socket layer initialized
[    5.216319] Console: switching to colour frame buffer device 180x56
[    5.229926] dell_wmi: Unknown key with type 0x0011 and code 0xffd1 pressed
[    5.237871] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.411680] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[    5.636267] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[    5.641728] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    5.643024] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx-0.fw
[    5.643610] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[    5.712598] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[    5.712612] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[    5.712874] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    5.796586] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[    5.796598] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[    5.796753] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    5.897525] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    6.804176] fuse init (API version 7.27)
[    8.544095] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[   11.110632] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   11.110646] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   11.110844] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   13.488795] Bluetooth: RFCOMM TTY layer initialized
[   13.488804] Bluetooth: RFCOMM socket layer initialized
[   13.488812] Bluetooth: RFCOMM ver 1.11
[   17.941002] wlp2s0b1: authenticate with b8:62:1f:50:76:24
[   17.943800] wlp2s0b1: send auth to b8:62:1f:50:76:24 (try 1/3)
[   17.946973] wlp2s0b1: authenticated
[   17.947986] wlp2s0b1: associate with b8:62:1f:50:76:24 (try 1/3)
[   17.951692] wlp2s0b1: RX AssocResp from b8:62:1f:50:76:24 (capab=0x411 status=0 aid=1)
[   17.952518] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[   17.952524] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   17.952538] wlp2s0b1: associated
[   17.957177] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 159/256 dur 1778/1504
[   17.965600] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 137/256 dur 1602/1504
[   17.977411] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[   17.985338] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[   18.082574] Guest personality initialized and is inactive
[   18.082654] VMCI host device registered (name=vmci, major=10, minor=56)
[   18.082655] Initialized host personality
[   18.116350] NET: Registered protocol family 40
[   50.015160] pci_bus 0000:0b: Allocating resources
[   50.015184] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[   50.015191] pci 0000:00:1e.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[   50.015198] pci 0000:00:1e.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[   50.015221] pci 0000:00:1e.0: BAR 14: assigned [mem 0xf7200000-0xf73fffff]
[   50.015235] pci 0000:00:1e.0: BAR 15: assigned [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.015246] pci 0000:00:1e.0: BAR 13: assigned [io  0x8000-0x8fff]
[   50.015258] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.015265] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.015275] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.015284] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.026990] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.026996] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027007] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027012] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.027047] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.027051] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027056] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027060] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.027347] pci_bus 0000:01: Allocating resources
[   50.027367] pci_bus 0000:02: Allocating resources
[   50.027391] pci_bus 0000:03: Allocating resources
[   50.027467] pci_bus 0000:05: Allocating resources
[   50.027482] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.027486] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027492] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027496] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.027529] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.027533] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027539] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027544] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.027636] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.027641] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027647] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027653] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.027715] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.027719] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027726] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027731] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.027847] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   50.027851] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   50.027856] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   50.027861] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   50.036345] dell_wmi: Unknown key with type 0x0011 and code 0xffd0 pressed
[   50.577343] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 0 addresses (implement)
[   50.577708] wlp2s0b1: deauthenticating from b8:62:1f:50:76:24 by local choice (Reason: 3=DEAUTH_LEAVING)
[   50.582695] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[   50.582703] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   50.671476] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   50.671492] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   50.671683] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   50.721740] PM: suspend entry (deep)
[   50.721743] PM: Syncing filesystems ... done.
[   50.886474] (NULL device *): firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[   50.886516] (NULL device *): firmware: direct-loading firmware brcm/bcm43xx-0.fw
[   50.886531] Freezing user space processes ... (elapsed 0.335 seconds) done.
[   51.222858] OOM killer disabled.
[   51.222859] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   51.224122] Suspending console(s) (use no_console_suspend to debug)
[   51.238918] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   51.238960] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[   51.238980] sd 6:0:0:0: [sdc] Synchronizing SCSI cache
[   51.239028] sd 0:0:0:0: [sda] Stopping disk
[   51.239036] sd 1:0:0:0: [sdb] Stopping disk
[   51.240936] e1000e: EEE TX LPI TIMER: 00000000
[   52.359377] ACPI: EC: interrupt blocked
[   52.379208] ACPI: Preparing to enter system sleep state S3
[   52.382436] ACPI: EC: event blocked
[   52.382437] ACPI: EC: EC stopped
[   52.382438] PM: Saving platform NVS memory
[   52.382459] Disabling non-boot CPUs ...
[   52.395411] IRQ 26: no longer affine to CPU1
[   52.396429] smpboot: CPU 1 is now offline
[   52.419449] IRQ 17: no longer affine to CPU2
[   52.420685] smpboot: CPU 2 is now offline
[   52.452512] smpboot: CPU 3 is now offline
[   52.456720] ACPI: Low-level resume complete
[   52.456781] ACPI: EC: EC started
[   52.456781] PM: Restoring platform NVS memory
[   52.457163] Enabling non-boot CPUs ...
[   52.457220] x86: Booting SMP configuration:
[   52.457221] smpboot: Booting Node 0 Processor 1 APIC 0x4
[   52.459652]  cache: parent cpu1 should not be sleeping
[   52.459976] CPU1 is up
[   52.460011] smpboot: Booting Node 0 Processor 2 APIC 0x1
[   52.462346]  cache: parent cpu2 should not be sleeping
[   52.462693] CPU2 is up
[   52.462731] smpboot: Booting Node 0 Processor 3 APIC 0x5
[   52.465072]  cache: parent cpu3 should not be sleeping
[   52.465442] CPU3 is up
[   52.467407] ACPI: Waking up from system sleep state S3
[   52.480520] ACPI: EC: interrupt unblocked
[   52.501169] sdhci-pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
[   52.503540] ACPI: EC: event unblocked
[   52.505826] sd 0:0:0:0: [sda] Starting disk
[   52.505828] sd 1:0:0:0: [sdb] Starting disk
[   52.537679] dell_wmi: Unknown key with type 0x0011 and code 0xffd0 pressed
[   52.749162] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[   52.765295] usb 2-1.7: reset full-speed USB device number 5 using ehci-pci
[   52.860408] ata5: SATA link down (SStatus 0 SControl 300)
[   52.860480] ata6: SATA link down (SStatus 0 SControl 300)
[   52.860515] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   52.946655] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[   52.957640] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[   52.957765] usb 2-1.2: reset high-speed USB device number 4 using ehci-pci
[   52.961680] ata1.00: configured for UDMA/133
[   53.005979] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   53.018486] ata2.00: configured for UDMA/100
[   53.082183] firewire_core 0000:03:00.4: rediscovered device fw0
[   53.146364] usb 2-1.1: reset full-speed USB device number 3 using ehci-pci
[   53.297109] OOM killer enabled.
[   53.297110] Restarting tasks ...
[   53.297195] pci_bus 0000:0b: Allocating resources
[   53.297222] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.297226] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.297231] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.297236] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.303941] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.303947] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.303953] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.303957] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.303989] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.303992] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.303997] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.304002] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.304309] pci_bus 0000:01: Allocating resources
[   53.304327] pci_bus 0000:02: Allocating resources
[   53.304348] pci_bus 0000:03: Allocating resources
[   53.304416] pci_bus 0000:05: Allocating resources
[   53.304431] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.304434] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.304438] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.304442] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.304473] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.304476] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.304481] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.304485] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.304568] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.304572] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.304578] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.304581] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.304637] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.304641] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.304646] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.304651] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.304758] pci 0000:00:1e.0: PCI bridge to [bus 0b]
[   53.304761] pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
[   53.304766] pci 0000:00:1e.0:   bridge window [mem 0xf7200000-0xf73fffff]
[   53.304770] pci 0000:00:1e.0:   bridge window [mem 0xf7400000-0xf75fffff 64bit pref]
[   53.306100] acpi PNP0401:00: Already enumerated
[   53.306670] done.
[   53.323562] acpi PNP0501:01: Still not present
[   53.420600] video LNXVIDEO:01: Restoring backlight state
[   53.442816] PM: suspend exit
[   53.700359] dell_wmi: Unknown key with type 0x0011 and code 0xffd1 pressed
[   53.730796] e1000e: eno1 NIC Link is Down
[   53.733808] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   53.956890] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   53.958717] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   54.028874] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   54.028893] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   54.029153] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   54.097470] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   55.031253] wlp2s0b1: authenticate with b8:62:1f:50:76:24
[   55.031352] wlp2s0b1: send auth to b8:62:1f:50:76:24 (try 1/3)
[   55.032868] wlp2s0b1: authenticated
[   55.035512] wlp2s0b1: associate with b8:62:1f:50:76:24 (try 1/3)
[   55.039202] wlp2s0b1: RX AssocResp from b8:62:1f:50:76:24 (capab=0x411 status=0 aid=1)
[   55.039822] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[   55.039830] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   55.039840] wlp2s0b1: associated
[   55.052493] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 159/256 dur 1778/1504
[   55.061171] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 137/256 dur 1602/1504
[   55.061637] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[   55.072097] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
korbielow
 
Posts: 35
Joined: 2014-12-21 11:24
Location: POLAND

Re: xfce4-power-manager not working

Postby debiman » 2018-10-21 14:55

re your first screenshot:
does it switch off after 10/6 minutes?

about your other output: not really sure what that is or why i should sift through it.
look for acpi errors if the problem persists.
User avatar
debiman
 
Posts: 3017
Joined: 2013-03-12 07:18

Re: xfce4-power-manager not working

Postby stevepusser » 2018-10-21 19:22

Also, if it's a real bug, it should be reported to Debian, not here. Testing and Sid are not Debian releases...
The MX Linux repositories: Backports galore! If we don't have something, just ask and we'll try--we like challenges. New packages: Quod Libet 4.2.0, Pale Moon 28.2.0, wine-staging 3.20, GIMP 2.10.8, Liquorix kernel 4.18-22, Midori 6.0
User avatar
stevepusser
 
Posts: 10130
Joined: 2009-10-06 05:53

Re: xfce4-power-manager not working

Postby korbielow » 2018-10-22 06:41

and I found one more issue. Screen remains blank after wake up from suspend. Temporary workaround is to use ctrl+alt+f2. I suppose it's some graphic card bug. any clue how to fix it ?
korbielow
 
Posts: 35
Joined: 2014-12-21 11:24
Location: POLAND

Re: xfce4-power-manager not working

Postby FreewheelinFrank » 2018-10-22 07:32

My experience is that XFCE has two applications which handle power management and if a screensaver is enabled then the settings in Screensaver Advanced are the way to handle screen shutoff.

Mind you, this is from a few years ago, so it may not be applicable now.

https://dontsurfinthenude.blogspot.com/ ... ebian.html
User avatar
FreewheelinFrank
 
Posts: 256
Joined: 2010-06-07 16:59


Return to Desktop & Multimedia

Who is online

Users browsing this forum: No registered users and 7 guests

fashionable