Openbox-session not working with lightdm

Everything about X, Gnome, KDE, ... and everything running on it

Openbox-session not working with lightdm

Postby steve1961 » 2020-02-16 15:32

Hi

I’ve installed openbox on my Debian 10 System and I’m having a problem logging in with lightdm. By default lightdm calls on the openbox.desktop file in /use/share/xsessions which uses the openbox-session command. This just dumps me back to the login screen. If I modify to desktop file so that the exec is just openbox it all works. However, only openbox-session parses the .config/openbox/autostart file so none of my custom commands in this file are run. Any idea how to resolve the situation so that the default openbox-session command works?
User avatar
steve1961
 
Posts: 63
Joined: 2005-10-16 21:07
Location: Coventry, UK

Re: Openbox-session not working with lightdm

Postby Bulkley » 2020-02-16 15:44

Do you need a DM? What happens if you just use startx?
Bulkley
 
Posts: 5893
Joined: 2006-02-11 18:35

Re: Openbox-session not working with lightdm

Postby steve1961 » 2020-02-16 16:18

I’d prefer to use a DM as I have mate on this system as well so would need to set up a default xsession in a .xinitrc file for startx to work. I also have lightdm customised to my liking
User avatar
steve1961
 
Posts: 63
Joined: 2005-10-16 21:07
Location: Coventry, UK

Re: Openbox-session not working with lightdm

Postby Chrisdb » 2020-02-16 20:00

Can you post output of lightdm log?
Chrisdb
 
Posts: 273
Joined: 2018-04-10 07:16

Re: Openbox-session not working with lightdm

Postby shep » 2020-02-17 12:28

Arch Linux has a comprehensive wiki on lightdm. It includes session management and trouble shooting
https://wiki.archlinux.org/index.php/LightDM
shep
 
Posts: 369
Joined: 2011-03-15 15:22

Re: Openbox-session not working with lightdm

Postby steve1961 » 2020-02-22 11:32

Chrisdb wrote:Can you post output of lightdm log?


Hi

Yes Here's the relevant bits of lightdm log
Code: Select all
[+244.38s] DEBUG: Activating login1 session c16
[+244.38s] DEBUG: Seat seat0 changes active session to c16
[+244.38s] DEBUG: Session c16 is already active
[+244.59s] DEBUG: Greeter connected version=1.26.0 api=1 resettable=false
[+244.67s] DEBUG: Greeter start authentication for steve
[+244.67s] DEBUG: Session pid=14066: Started with service 'lightdm', username 'steve'
[+244.68s] DEBUG: Session pid=14066: Got 1 message(s) from PAM
[+244.68s] DEBUG: Prompt greeter with 1 message(s)
[+251.42s] DEBUG: Continue authentication
[+251.44s] DEBUG: Session pid=14066: Authentication complete with return value 0: Success
[+251.44s] DEBUG: Authenticate result for user steve: Success
[+251.44s] DEBUG: User steve authorized
[+251.44s] DEBUG: Greeter requests session openbox
[+251.44s] DEBUG: Writing /home/steve/.dmrc
[+251.45s] DEBUG: Seat seat0: Stopping greeter; display server will be re-used for user session
[+251.45s] DEBUG: Terminating login1 session c16
[+251.45s] DEBUG: Session pid=13999: Sending SIGTERM
[+251.46s] DEBUG: Greeter closed communication channel
[+251.46s] DEBUG: Session pid=13999: Exited with return value 0
[+251.46s] DEBUG: Seat seat0: Session stopped
[+251.46s] DEBUG: Seat seat0: Greeter stopped, running session
[+251.46s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session3
[+251.46s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified)
[+251.47s] DEBUG: Session pid=14066: Running command /etc/X11/Xsession /usr/bin/openbox-session
[+251.47s] DEBUG: Creating shared data directory /var/lib/lightdm/data/steve
[+251.47s] DEBUG: Session pid=14066: Logging to .xsession-errors
cd


And Xsession-errors
Code: Select all
Xsession: X session started for steve at Sat 22 Feb 12:11:42 GMT 2020
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting XAUTHORITY=/home/steve/.Xauthority
localuser:steve being added to access control list
dbus-update-activation-environment: setting GTK_MODULES=gail:atk-bridge
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: setting USER=steve
dbus-update-activation-environment: setting LC_TIME=en_GB.UTF-8
dbus-update-activation-environment: setting XDG_SESSION_TYPE=x11
dbus-update-activation-environment: setting HOME=/home/steve
dbus-update-activation-environment: setting QT4_IM_MODULE=ibus
dbus-update-activation-environment: setting DESKTOP_SESSION=mate
dbus-update-activation-environment: setting XDG_SEAT_PATH=/org/freedesktop/DisplayManager/Seat0
dbus-update-activation-environment: setting GTK_MODULES=gail:atk-bridge
dbus-update-activation-environment: setting LC_MONETARY=en_GB.UTF-8
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting IM_CONFIG_PHASE=1
dbus-update-activation-environment: setting LOGNAME=steve
dbus-update-activation-environment: setting GTK_IM_MODULE=ibus
dbus-update-activation-environment: setting XDG_SESSION_CLASS=user
dbus-update-activation-environment: setting PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
dbus-update-activation-environment: setting LC_ADDRESS=en_GB.UTF-8
dbus-update-activation-environment: setting XDG_SESSION_PATH=/org/freedesktop/DisplayManager/Session4
dbus-update-activation-environment: setting XDG_RUNTIME_DIR=/run/user/1000
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting LC_TELEPHONE=en_GB.UTF-8
dbus-update-activation-environment: setting LANG=en_GB.UTF-8
dbus-update-activation-environment: setting XDG_CURRENT_DESKTOP=MATE
dbus-update-activation-environment: setting XDG_SESSION_DESKTOP=mate
dbus-update-activation-environment: setting XAUTHORITY=/home/steve/.Xauthority
dbus-update-activation-environment: setting XMODIFIERS=@im=ibus
dbus-update-activation-environment: setting XDG_GREETER_DATA_DIR=/var/lib/lightdm/data/steve
dbus-update-activation-environment: setting SHELL=/bin/bash
dbus-update-activation-environment: setting LC_NAME=en_GB.UTF-8
dbus-update-activation-environment: setting GDMSESSION=mate
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: setting LC_MEASUREMENT=en_GB.UTF-8
dbus-update-activation-environment: setting LC_IDENTIFICATION=en_GB.UTF-8
dbus-update-activation-environment: setting GPG_AGENT_INFO=/run/user/1000/gnupg/S.gpg-agent:0:1
dbus-update-activation-environment: setting QT_IM_MODULE=ibus
dbus-update-activation-environment: setting PWD=/home/steve
dbus-update-activation-environment: setting XDG_DATA_DIRS=/usr/share/mate:/home/steve/.local/share/flatpak/exports/share:/var/lib/flatpak/exports/share:/usr/local/share:/usr/share
dbus-update-activation-environment: setting CLUTTER_IM_MODULE=ibus
dbus-update-activation-environment: setting LC_NUMERIC=en_GB.UTF-8
dbus-update-activation-environment: setting LC_PAPER=en_GB.UTF-8
mate-session[14325]: WARNING: Unable to find provider '' of required component 'dock'
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh

** (mate-screensaver:14518): WARNING **: 12:11:44.461: Config key not handled: lock-dialog-theme

** (mate-screensaver:14518): WARNING **: 12:11:44.462: Config key not handled: disable-command-line

** (mate-screensaver:14518): WARNING **: 12:11:44.462: Config key not handled: disable-application-handlers

** (mate-screensaver:14518): WARNING **: 12:11:44.462: Config key not handled: disable-printing

** (mate-screensaver:14518): WARNING **: 12:11:44.463: Config key not handled: disable-log-out

** (mate-screensaver:14518): WARNING **: 12:11:44.463: Config key not handled: disable-theme-settings

** (mate-screensaver:14518): WARNING **: 12:11:44.463: Config key not handled: disable-print-setup

** (mate-screensaver:14518): WARNING **: 12:11:44.463: Config key not handled: disable-save-to-disk
Failed to register: GDBus.Error:org.freedesktop.DBus.Error.NoReply: Message recipient disconnected from message bus without replying
Window manager warning: Log level 128: posix_spawn avoided (automatic reaping requested) (fd close requested) (child_setup specified)
User avatar
steve1961
 
Posts: 63
Joined: 2005-10-16 21:07
Location: Coventry, UK

Re: Openbox-session not working with lightdm

Postby Head_on_a_Stick » 2020-02-22 12:06

steve1961 wrote:the relevant bits of lightdm log

If you don't know what the problem is then how do you know what's relevant?

You should also post the *full* content of the openbox autostart (& environment) file(s). And check if this works from a console login:
Code: Select all
startx /usr/bin/openbox-session

If it doesn't then the problem isn't with the display manager at all.

Oh and don't use LightDM, it runs X as root. If you must use a display manager then switch to GDM instead, that runs X under the normal user.
User avatar
Head_on_a_Stick
 
Posts: 11489
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: Openbox-session not working with lightdm

Postby Deb-fan » 2020-02-22 12:43

Been so long can't remember config lightdm. Though would look for the lightdm.conf file something like "locate lightdm.conf" in term dig through that puppy for an appropriate place to slap openbox-session. Would also try this first to see whatcha get.

"sudo update-alternatives --config x-session-manager" if openbox-session is already there (think it is, can't remember)select it and reboot, I'd be default x-session. If not got a how 2 up on autologin + startx in tips tricks that shows how to install something like Openbox to x-session-manager so it can be selected. Just general thoughts for ya.

Also you'll have to excuse Head_on, he's a cyborg and you know how impatient those can get when data isn't provided. Hey wait Hoas, are you a cyborg or an android? :P
Deb-fan
 
Posts: 681
Joined: 2012-08-14 12:27

Re: Openbox-session not working with lightdm

Postby steve1961 » 2020-02-22 17:04

Head_on_a_Stick wrote:
steve1961 wrote:the relevant bits of lightdm log

If you don't know what the problem is then how do you know what's relevant?

You should also post the *full* content of the openbox autostart (& environment) file(s). And check if this works from a console login:
Code: Select all
startx /usr/bin/openbox-session

If it doesn't then the problem isn't with the display manager at all.

Oh and don't use LightDM, it runs X as root. If you must use a display manager then switch to GDM instead, that runs X under the normal user.


It seems it's not lightdm

It also wouldn't launch with startx.

Here's the permissions of .config/openbox folder
Code: Select all
drwxr-xr-x  2 steve steve  4096 Feb 22 17:34 .
drwx------ 37 steve steve  4096 Feb 22 17:38 ..
-rwxr-xr-x  1 steve steve   492 Feb 22 17:34 autostart
-rwxr-xr-x  1 steve steve  1017 Feb 22 17:34 environment
-rw-r--r--  1 steve steve  1061 Feb 22 17:34 menu.xml
-rw-r--r--  1 steve steve 24189 Feb 22 17:34 rc.xml


Autostart file

Code: Select all
# These things are run when an Openbox X Session is started.
# You may place a similar script in $HOME/.config/openbox/autostart
# to run user-specific things.
#

# If you want to use GNOME config tools...
#
#if test -x /usr/lib/x86_64-linux-gnu/gnome-settings-daemon >/dev/null; then
#  /usr/lib/x86_64-linux-gnu/gnome-settings-daemon &
#elif which gnome-settings-daemon >/dev/null 2>&1; then
#  gnome-settings-daemon &
#fi

# If you want to use XFCE config tools...
#
#xfce-mcs-manager &


Environment file
Code: Select all
# Set system-wide environment variables here for Openbox
# User-specific variables should be placed in $HOME/.config/openbox/environment
#

# To set your language for displaying messages and time/date formats, use the following:
#LANG=en_CA.UTF8

# To set your keyboard layout, you need to modify your X config:
# http://www.google.com/search?q=how+to+set+keyboard+layout+xorg
User avatar
steve1961
 
Posts: 63
Joined: 2005-10-16 21:07
Location: Coventry, UK

Re: Openbox-session not working with lightdm

Postby Head_on_a_Stick » 2020-02-22 20:19

Deb-fan wrote:are you a cyborg or an android?

I'm a bot.

steve1961 wrote:It also wouldn't launch with startx.

So what actually happens? What do you see, exactly?

Please post the content of ~/.local/share/xorg/Xorg.0.log immediately after a failed startx launch.

Note that the autostart & environment files don't need to be executable and they should have some lines that aren't commented-out if you want to run things from them.
User avatar
Head_on_a_Stick
 
Posts: 11489
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: Openbox-session not working with lightdm

Postby Deb-fan » 2020-02-23 02:40

Lol Head_on. :)

Yep it's telling when you see things like "I've got xyz really setup how I like it". Surely means much config fiddling has been done and gawds know what all/how the person went about it. Though one of the greatest joys in gnu/nix in my view. Hacking hades out of config files and system, till you get it doing whatcha want. Of course have to stick as close to best practices as possible. Guess I really should be using an .xsession file here rather than xinitrc but found out some graphical interfaces just don't like it. Crazily considering setting up a dummy symlinked xinitrc arrangement so all things are covered. Ah but then someone can have both without problems anyway.

+1 Head_on, an autostart file with nothing set to start in it isn't much good unless that's what x-nixer wants. Openbox has always been extremely well behaved, it's popular enough that it's received enough developer attention and userbase that it's top of class in windows managers in my view. Never had issues however trying to start it, dm, including lightdm, xinitrc or setting it default x-session directly. None of this helps if someone messes up their dm configs though.
Deb-fan
 
Posts: 681
Joined: 2012-08-14 12:27

Re: Openbox-session not working with lightdm

Postby steve1961 » 2020-02-23 09:29

Head_on_a_Stick wrote:
Deb-fan wrote:are you a cyborg or an android?

I'm a bot.

steve1961 wrote:It also wouldn't launch with startx.

So what actually happens? What do you see, exactly?

Please post the content of ~/.local/share/xorg/Xorg.0.log immediately after a failed startx launch.

Note that the autostart & environment files don't need to be executable and they should have some lines that aren't commented-out if you want to run things from them.


Thanks for the advice so far. The autostart and environment files have nothing in them because I've not managed to launch openbox-session yet, only openbox as the wm for the Mate DE.
Tried again with startx after disabling lightdm. Here's the log immediately after the fail:
Code: Select all
[    74.320]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[    74.320] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[    74.320] Current Operating System: Linux steve-pc 4.19.0-8-amd64 #1 SMP Debian 4.19.98-1 (2020-01-26) x86_64
[    74.320] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-8-amd64 root=UUID=ea8c3b36-1518-4f08-a69a-c91c943d40b1 ro quiet resume=UUID=13b533c8-0e96-47bd-81a8-e8485b519570
[    74.320] Build Date: 05 March 2019  08:11:12PM
[    74.321] xorg-server 2:1.20.4-1 (https://www.debian.org/support)
[    74.321] Current version of pixman: 0.36.0
[    74.321]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    74.321] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    74.322] (==) Log file: "/home/steve/.local/share/xorg/Xorg.0.log", Time: Sun Feb 23 10:08:25 2020
[    74.325] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    74.325] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    74.331] (==) No Layout section.  Using the first Screen section.
[    74.331] (==) No screen section available. Using defaults.
[    74.331] (**) |-->Screen "Default Screen Section" (0)
[    74.331] (**) |   |-->Monitor "<default monitor>"
[    74.334] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    74.334] (==) Automatically adding devices
[    74.334] (==) Automatically enabling devices
[    74.334] (==) Automatically adding GPU devices
[    74.334] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    74.344] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    74.344]    Entry deleted from font path.
[    74.361] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   built-ins
[    74.361] (==) ModulePath set to "/usr/lib/xorg/modules"
[    74.361] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    74.361] (II) Loader magic: 0x55ed28fdde20
[    74.361] (II) Module ABI versions:
[    74.361]    X.Org ANSI C Emulation: 0.4
[    74.361]    X.Org Video Driver: 24.0
[    74.361]    X.Org XInput driver : 24.1
[    74.361]    X.Org Server Extension : 10.0
[    74.363] (++) using VT number 1

[    74.371] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    74.374] (II) xfree86: Adding drm device (/dev/dri/card0)
[    74.377] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[    74.388] (--) PCI:*(0@0:2:0) 8086:5926:8086:2068 rev 6, Mem @ 0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    74.388] (II) LoadModule: "glx"
[    74.391] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    74.427] (II) Module glx: vendor="X.Org Foundation"
[    74.428]    compiled for 1.20.4, module version = 1.0.0
[    74.428]    ABI class: X.Org Server Extension, version 10.0
[    74.428] (==) Matched modesetting as autoconfigured driver 0
[    74.428] (==) Matched fbdev as autoconfigured driver 1
[    74.428] (==) Matched vesa as autoconfigured driver 2
[    74.428] (==) Assigned the driver to the xf86ConfigLayout
[    74.428] (II) LoadModule: "modesetting"
[    74.428] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    74.432] (II) Module modesetting: vendor="X.Org Foundation"
[    74.432]    compiled for 1.20.4, module version = 1.20.4
[    74.432]    Module class: X.Org Video Driver
[    74.432]    ABI class: X.Org Video Driver, version 24.0
[    74.432] (II) LoadModule: "fbdev"
[    74.432] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    74.435] (II) Module fbdev: vendor="X.Org Foundation"
[    74.435]    compiled for 1.20.0, module version = 0.5.0
[    74.435]    Module class: X.Org Video Driver
[    74.435]    ABI class: X.Org Video Driver, version 24.0
[    74.435] (II) LoadModule: "vesa"
[    74.435] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    74.437] (II) Module vesa: vendor="X.Org Foundation"
[    74.437]    compiled for 1.20.1, module version = 2.4.0
[    74.437]    Module class: X.Org Video Driver
[    74.437]    ABI class: X.Org Video Driver, version 24.0
[    74.437] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    74.437] (II) FBDEV: driver for framebuffer: fbdev
[    74.437] (II) VESA: driver for VESA chipsets: vesa
[    74.438] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    74.438] (II) modeset(0): using drv /dev/dri/card0
[    74.438] (WW) Falling back to old probe method for fbdev
[    74.438] (II) Loading sub module "fbdevhw"
[    74.438] (II) LoadModule: "fbdevhw"
[    74.438] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    74.441] (II) Module fbdevhw: vendor="X.Org Foundation"
[    74.441]    compiled for 1.20.4, module version = 0.0.2
[    74.441]    ABI class: X.Org Video Driver, version 24.0
[    74.441] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    74.441] (II) modeset(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    74.441] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    74.441] (==) modeset(0): RGB weight 888
[    74.441] (==) modeset(0): Default visual is TrueColor
[    74.441] (II) Loading sub module "glamoregl"
[    74.441] (II) LoadModule: "glamoregl"
[    74.442] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    74.469] (II) Module glamoregl: vendor="X.Org Foundation"
[    74.469]    compiled for 1.20.4, module version = 1.0.1
[    74.469]    ABI class: X.Org ANSI C Emulation, version 0.4
[    74.656] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) Iris Plus Graphics 640 (Kaby Lake GT3e)
[    74.656] (II) modeset(0): glamor initialized
[    74.705] (II) modeset(0): Output DP-1 has no monitor section
[    74.758] (II) modeset(0): Output DP-2 has no monitor section
[    74.868] (II) modeset(0): Output HDMI-1 has no monitor section
[    74.918] (II) modeset(0): EDID for output DP-1
[    74.918] (II) modeset(0): Manufacturer: ACR  Model: 521  Serial#: 2151687923
[    74.918] (II) modeset(0): Year: 2018  Week: 4
[    74.918] (II) modeset(0): EDID Version: 1.3
[    74.918] (II) modeset(0): Digital Display Input
[    74.918] (II) modeset(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    74.918] (II) modeset(0): Gamma: 2.20
[    74.918] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[    74.919] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    74.919] (II) modeset(0): Default color space is primary color space
[    74.919] (II) modeset(0): First detailed timing is preferred mode
[    74.919] (II) modeset(0): redX: 0.652 redY: 0.336   greenX: 0.321 greenY: 0.610
[    74.919] (II) modeset(0): blueX: 0.153 blueY: 0.061   whiteX: 0.313 whiteY: 0.329
[    74.919] (II) modeset(0): Supported established timings:
[    74.919] (II) modeset(0): 720x400@70Hz
[    74.919] (II) modeset(0): 640x480@60Hz
[    74.919] (II) modeset(0): 640x480@67Hz
[    74.919] (II) modeset(0): 800x600@56Hz
[    74.919] (II) modeset(0): 800x600@60Hz
[    74.919] (II) modeset(0): 1024x768@60Hz
[    74.919] (II) modeset(0): 1024x768@70Hz
[    74.919] (II) modeset(0): Manufacturer's mask: 0
[    74.919] (II) modeset(0): Supported standard timings:
[    74.919] (II) modeset(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    74.919] (II) modeset(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    74.919] (II) modeset(0): #2: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    74.919] (II) modeset(0): #3: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    74.919] (II) modeset(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    74.919] (II) modeset(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    74.919] (II) modeset(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    74.919] (II) modeset(0): Supported detailed timing:
[    74.919] (II) modeset(0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[    74.919] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    74.919] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    74.919] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 75 kHz, PixClock max 185 MHz
[    74.919] (II) modeset(0): Monitor name: R241Y
[    74.919] (II) modeset(0): Serial No: T6PEE0012411
[    74.919] (II) modeset(0): Supported detailed timing:
[    74.919] (II) modeset(0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[    74.919] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    74.919] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    74.919] (II) modeset(0): Supported detailed timing:
[    74.919] (II) modeset(0): clock: 74.2 MHz   Image Size:  527 x 296 mm
[    74.919] (II) modeset(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    74.919] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    74.919] (II) modeset(0): Supported detailed timing:
[    74.919] (II) modeset(0): clock: 27.0 MHz   Image Size:  527 x 296 mm
[    74.919] (II) modeset(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    74.919] (II) modeset(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    74.919] (II) modeset(0): Supported detailed timing:
[    74.919] (II) modeset(0): clock: 25.2 MHz   Image Size:  527 x 296 mm
[    74.919] (II) modeset(0): h_active: 640  h_sync: 648  h_sync_end 744 h_blank_end 800 h_border: 8
[    74.919] (II) modeset(0): v_active: 480  v_sync: 482  v_sync_end 484 v_blanking: 525 v_border: 8
[    74.919] (II) modeset(0): Number of EDID sections to follow: 1
[    74.919] (II) modeset(0): EDID (in hex):
[    74.920] (II) modeset(0):    00ffffffffffff0004722105f3264080
[    74.920] (II) modeset(0):    041c010380351e78ee0565a756529c27
[    74.920] (II) modeset(0):    0f5054b30c00714f818081c081009500
[    74.920] (II) modeset(0):    b300d1c00101023a801871382d40582c
[    74.920] (II) modeset(0):    45000f282100001e000000fd00384b1f
[    74.920] (II) modeset(0):    4b12000a202020202020000000fc0052
[    74.920] (II) modeset(0):    323431590a20202020202020000000ff
[    74.920] (II) modeset(0):    005436504545303031323431310a010a
[    74.920] (II) modeset(0):    02031cf1499001030412131f05142309
[    74.920] (II) modeset(0):    07078301000065030c001000023a8018
[    74.920] (II) modeset(0):    71382d40582c45000f282100001e011d
[    74.920] (II) modeset(0):    007251d01e206e2855000f282100001e
[    74.920] (II) modeset(0):    8c0ad08a20e02d10103e96000f282100
[    74.920] (II) modeset(0):    0018d60980a020e02d10086022000f28
[    74.920] (II) modeset(0):    21080818000000000000000000000000
[    74.920] (II) modeset(0):    0000000000000000000000000000002e
[    74.920] (II) modeset(0): Printing probed modes for output DP-1
[    74.920] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    74.920] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    74.920] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    74.920] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    74.920] (II) modeset(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    74.920] (II) modeset(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    74.920] (II) modeset(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[    74.920] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    74.920] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    74.920] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    74.920] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    74.920] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    74.920] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    74.920] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    74.920] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    74.920] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    74.920] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    74.921] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    74.921] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    74.921] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    74.921] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    74.921] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    74.921] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    74.921] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    74.921] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    74.921] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    74.921] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    74.921] (II) modeset(0): Modeline "640x480"x60.0   25.18  640 648 744 800  480 482 484 525 -hsync -vsync (31.5 kHz e)
[    74.921] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    74.921] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    74.921] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    74.974] (WW) EDID timing clock 146.25 exceeds claimed max 146MHz, fixing
[    74.974] (II) modeset(0): EDID for output DP-2
[    74.974] (II) modeset(0): Manufacturer: DEL  Model: d01a  Serial#: 810305612
[    74.974] (II) modeset(0): Year: 2008  Week: 25
[    74.974] (II) modeset(0): EDID Version: 1.4
[    74.974] (II) modeset(0): Digital Display Input
[    74.974] (II) modeset(0): Undefined color depth
[    74.974] (II) modeset(0): Digital interface is undefined
[    74.974] (II) modeset(0): Max Image Size [cm]: horiz.: 43  vert.: 27
[    74.974] (II) modeset(0): Gamma: 2.20
[    74.974] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[    74.974] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    74.974] (II) modeset(0): Default color space is primary color space
[    74.974] (II) modeset(0): First detailed timing is preferred mode
[    74.974] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    74.974] (II) modeset(0): Display is continuous-frequency
[    74.974] (II) modeset(0): redX: 0.654 redY: 0.327   greenX: 0.276 greenY: 0.618
[    74.974] (II) modeset(0): blueX: 0.145 blueY: 0.080   whiteX: 0.312 whiteY: 0.358
[    74.974] (II) modeset(0): Supported established timings:
[    74.974] (II) modeset(0): 720x400@70Hz
[    74.974] (II) modeset(0): 640x480@60Hz
[    74.974] (II) modeset(0): 640x480@75Hz
[    74.974] (II) modeset(0): 800x600@60Hz
[    74.974] (II) modeset(0): 800x600@75Hz
[    74.974] (II) modeset(0): 1024x768@60Hz
[    74.974] (II) modeset(0): 1024x768@75Hz
[    74.974] (II) modeset(0): 1280x1024@75Hz
[    74.974] (II) modeset(0): Manufacturer's mask: 0
[    74.974] (II) modeset(0): Supported standard timings:
[    74.975] (II) modeset(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    74.975] (II) modeset(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    74.975] (II) modeset(0): Supported detailed timing:
[    74.975] (II) modeset(0): clock: 146.2 MHz   Image Size:  430 x 270 mm
[    74.975] (II) modeset(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
[    74.975] (II) modeset(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
[    74.975] (II) modeset(0): Serial No: M511D86G0LHL
[    74.975] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 146250 kHz
[    74.975] (II) modeset(0): Maximum pixel width: 1680
[    74.975] (II) modeset(0): Supported aspect ratios: 4:3 16:9 16:10* 5:4 15:9
[    74.975] (II) modeset(0): Supported blankings: standard reduced
[    74.975] (II) modeset(0): Supported scalings: hshrink hstretch vshrink vstretch
[    74.975] (II) modeset(0): Buggy monitor, no preferred refresh rate given
[    74.975] (II) modeset(0): Monitor name: DELL SP2009W
[    74.975] (II) modeset(0): EDID (in hex):
[    74.975] (II) modeset(0):    00ffffffffffff0010ac1ad04c484c30
[    74.975] (II) modeset(0):    19120104802b1b78efbd23a753469e25
[    74.975] (II) modeset(0):    14505ba54b00714f8180010101010101
[    74.975] (II) modeset(0):    01010101010121399030621a274068b0
[    74.975] (II) modeset(0):    3600ae0e1100001c000000ff004d3531
[    74.975] (II) modeset(0):    3144383647304c484c0a000000fd0038
[    74.975] (II) modeset(0):    4b1e530f04113cd2f858f000000000fc
[    74.975] (II) modeset(0):    0044454c4c20535032303039570a00fb
[    74.975] (II) modeset(0): Printing probed modes for output DP-2
[    74.975] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[    74.975] (II) modeset(0): Modeline "1680x945"x60.0  107.29  1680 1728 1760 1840  945 948 953 972 +hsync -vsync (58.3 kHz)
[    74.975] (II) modeset(0): Modeline "1400x1050"x59.9  101.00  1400 1448 1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[    74.975] (II) modeset(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    74.975] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    74.975] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    74.975] (II) modeset(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    74.975] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    74.975] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    74.975] (II) modeset(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
[    74.975] (II) modeset(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[    74.975] (II) modeset(0): Modeline "1280x800"x74.9  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz e)
[    74.976] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    74.976] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    74.976] (II) modeset(0): Modeline "1280x768"x74.9  102.25  1280 1360 1488 1696  768 771 778 805 -hsync +vsync (60.3 kHz e)
[    74.976] (II) modeset(0): Modeline "1280x768"x60.0   68.25  1280 1328 1360 1440  768 771 778 790 +hsync -vsync (47.4 kHz e)
[    74.976] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    74.976] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    74.976] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    74.976] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    74.976] (II) modeset(0): Modeline "1024x576"x59.9   42.08  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz)
[    74.976] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    74.976] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    74.976] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    74.976] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    74.976] (II) modeset(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    74.976] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    74.976] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    74.976] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    74.976] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    75.085] (II) modeset(0): EDID for output HDMI-1
[    75.085] (II) modeset(0): Output DP-1 connected
[    75.085] (II) modeset(0): Output DP-2 connected
[    75.085] (II) modeset(0): Output HDMI-1 disconnected
[    75.085] (II) modeset(0): Using spanning desktop for initial modes
[    75.085] (II) modeset(0): Output DP-1 using initial mode 1920x1080 +0+0
[    75.085] (II) modeset(0): Output DP-2 using initial mode 1680x1050 +1920+0
[    75.085] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    75.085] (==) modeset(0): DPI set to (96, 96)
[    75.085] (II) Loading sub module "fb"
[    75.085] (II) LoadModule: "fb"
[    75.086] (II) Loading /usr/lib/xorg/modules/libfb.so
[    75.090] (II) Module fb: vendor="X.Org Foundation"
[    75.090]    compiled for 1.20.4, module version = 1.0.0
[    75.090]    ABI class: X.Org ANSI C Emulation, version 0.4
[    75.090] (II) UnloadModule: "fbdev"
[    75.091] (II) Unloading fbdev
[    75.091] (II) UnloadSubModule: "fbdevhw"
[    75.091] (II) Unloading fbdevhw
[    75.091] (II) UnloadModule: "vesa"
[    75.091] (II) Unloading vesa
[    75.206] (==) modeset(0): Backing store enabled
[    75.206] (==) modeset(0): Silken mouse enabled
[    75.338] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    75.338] (==) modeset(0): DPMS enabled
[    75.340] (II) modeset(0): [DRI2] Setup complete
[    75.340] (II) modeset(0): [DRI2]   DRI driver: i965
[    75.340] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    75.340] (II) Initializing extension Generic Event Extension
[    75.341] (II) Initializing extension SHAPE
[    75.341] (II) Initializing extension MIT-SHM
[    75.341] (II) Initializing extension XInputExtension
[    75.343] (II) Initializing extension XTEST
[    75.343] (II) Initializing extension BIG-REQUESTS
[    75.344] (II) Initializing extension SYNC
[    75.344] (II) Initializing extension XKEYBOARD
[    75.345] (II) Initializing extension XC-MISC
[    75.345] (II) Initializing extension SECURITY
[    75.345] (II) Initializing extension XFIXES
[    75.346] (II) Initializing extension RENDER
[    75.346] (II) Initializing extension RANDR
[    75.347] (II) Initializing extension COMPOSITE
[    75.347] (II) Initializing extension DAMAGE
[    75.347] (II) Initializing extension MIT-SCREEN-SAVER
[    75.348] (II) Initializing extension DOUBLE-BUFFER
[    75.348] (II) Initializing extension RECORD
[    75.348] (II) Initializing extension DPMS
[    75.349] (II) Initializing extension Present
[    75.349] (II) Initializing extension DRI3
[    75.350] (II) Initializing extension X-Resource
[    75.350] (II) Initializing extension XVideo
[    75.350] (II) Initializing extension XVideo-MotionCompensation
[    75.350] (II) Initializing extension SELinux
[    75.350] (II) SELinux: Disabled on system
[    75.350] (II) Initializing extension GLX
[    75.370] (II) AIGLX: Loaded and initialized i965
[    75.370] (II) GLX: Initialized DRI2 GL provider for screen 0
[    75.370] (II) Initializing extension XFree86-VidModeExtension
[    75.370] (II) Initializing extension XFree86-DGA
[    75.370] (II) Initializing extension XFree86-DRI
[    75.370] (II) Initializing extension DRI2
[    75.401] (II) modeset(0): Damage tracking initialized
[    75.401] (II) modeset(0): Setting screen physical size to 952 x 285
[    75.576] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    75.576] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    75.576] (**) Power Button: Applying InputClass "system-keyboard"
[    75.576] (II) LoadModule: "libinput"
[    75.576] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    75.590] (II) Module libinput: vendor="X.Org Foundation"
[    75.590]    compiled for 1.20.4, module version = 0.28.2
[    75.590]    Module class: X.Org XInput Driver
[    75.590]    ABI class: X.Org XInput driver, version 24.1
[    75.590] (II) Using input driver 'libinput' for 'Power Button'
[    75.592] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 20 paused 0
[    75.592] (**) Power Button: always reports core events
[    75.592] (**) Option "Device" "/dev/input/event2"
[    75.592] (**) Option "_source" "server/udev"
[    75.605] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    75.605] (II) event2  - Power Button: device is a keyboard
[    75.606] (II) event2  - Power Button: device removed
[    75.606] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    75.606] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    75.606] (**) Option "xkb_model" "pc105"
[    75.606] (**) Option "xkb_layout" "gb"
[    75.623] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    75.623] (II) event2  - Power Button: device is a keyboard
[    75.623] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    75.623] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    75.623] (**) Video Bus: Applying InputClass "system-keyboard"
[    75.623] (II) Using input driver 'libinput' for 'Video Bus'
[    75.624] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 23 paused 0
[    75.624] (**) Video Bus: always reports core events
[    75.624] (**) Option "Device" "/dev/input/event3"
[    75.624] (**) Option "_source" "server/udev"
[    75.625] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    75.625] (II) event3  - Video Bus: device is a keyboard
[    75.625] (II) event3  - Video Bus: device removed
[    75.625] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[    75.625] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    75.625] (**) Option "xkb_model" "pc105"
[    75.625] (**) Option "xkb_layout" "gb"
[    75.625] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    75.625] (II) event3  - Video Bus: device is a keyboard
[    75.626] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    75.626] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    75.626] (**) Power Button: Applying InputClass "system-keyboard"
[    75.626] (II) Using input driver 'libinput' for 'Power Button'
[    75.626] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 24 paused 0
[    75.626] (**) Power Button: always reports core events
[    75.626] (**) Option "Device" "/dev/input/event1"
[    75.626] (**) Option "_source" "server/udev"
[    75.627] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    75.627] (II) event1  - Power Button: device is a keyboard
[    75.627] (II) event1  - Power Button: device removed
[    75.627] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    75.627] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    75.627] (**) Option "xkb_model" "pc105"
[    75.627] (**) Option "xkb_layout" "gb"
[    75.628] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    75.628] (II) event1  - Power Button: device is a keyboard
[    75.628] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    75.628] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    75.628] (**) Sleep Button: Applying InputClass "system-keyboard"
[    75.628] (II) Using input driver 'libinput' for 'Sleep Button'
[    75.629] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 25 paused 0
[    75.629] (**) Sleep Button: always reports core events
[    75.629] (**) Option "Device" "/dev/input/event0"
[    75.629] (**) Option "_source" "server/udev"
[    75.629] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    75.629] (II) event0  - Sleep Button: device is a keyboard
[    75.629] (II) event0  - Sleep Button: device removed
[    75.629] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    75.629] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    75.629] (**) Option "xkb_model" "pc105"
[    75.629] (**) Option "xkb_layout" "gb"
[    75.630] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    75.630] (II) event0  - Sleep Button: device is a keyboard
[    75.631] (II) config/udev: Adding input device GeneralPlus USB Audio Device (/dev/input/event4)
[    75.631] (**) GeneralPlus USB Audio Device: Applying InputClass "libinput keyboard catchall"
[    75.631] (**) GeneralPlus USB Audio Device: Applying InputClass "system-keyboard"
[    75.631] (II) Using input driver 'libinput' for 'GeneralPlus USB Audio Device'
[    75.632] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26 paused 0
[    75.632] (**) GeneralPlus USB Audio Device: always reports core events
[    75.632] (**) Option "Device" "/dev/input/event4"
[    75.632] (**) Option "_source" "server/udev"
[    75.633] (II) event4  - GeneralPlus USB Audio Device: is tagged by udev as: Keyboard
[    75.633] (II) event4  - GeneralPlus USB Audio Device: device is a keyboard
[    75.633] (II) event4  - GeneralPlus USB Audio Device: device removed
[    75.633] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.3/1-3.1.3.1/1-3.1.3.1:1.3/0003:1B3F:2008.0002/input/input4/event4"
[    75.633] (II) XINPUT: Adding extended input device "GeneralPlus USB Audio Device" (type: KEYBOARD, id 10)
[    75.633] (**) Option "xkb_model" "pc105"
[    75.633] (**) Option "xkb_layout" "gb"
[    75.634] (II) event4  - GeneralPlus USB Audio Device: is tagged by udev as: Keyboard
[    75.634] (II) event4  - GeneralPlus USB Audio Device: device is a keyboard
[    75.635] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event5)
[    75.635] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[    75.635] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[    75.636] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 27 paused 0
[    75.636] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[    75.636] (**) Option "Device" "/dev/input/event5"
[    75.636] (**) Option "_source" "server/udev"
[    75.637] (II) event5  - PixArt Microsoft USB Optical Mouse: is tagged by udev as: Mouse
[    75.637] (II) event5  - PixArt Microsoft USB Optical Mouse: device is a pointer
[    75.637] (II) event5  - PixArt Microsoft USB Optical Mouse: device removed
[    75.637] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.3/1-3.1.3.3/1-3.1.3.3:1.0/0003:045E:00CB.0003/input/input5/event5"
[    75.637] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 11)
[    75.637] (**) Option "AccelerationScheme" "none"
[    75.637] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[    75.637] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[    75.637] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[    75.638] (II) event5  - PixArt Microsoft USB Optical Mouse: is tagged by udev as: Mouse
[    75.638] (II) event5  - PixArt Microsoft USB Optical Mouse: device is a pointer
[    75.639] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[    75.639] (II) No input driver specified, ignoring this device.
[    75.639] (II) This device may have been added with another device file.
[    75.640] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event6)
[    75.640] (**) Microsoft Wired Keyboard 600: Applying InputClass "libinput keyboard catchall"
[    75.640] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[    75.640] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600'
[    75.641] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 28 paused 0
[    75.641] (**) Microsoft Wired Keyboard 600: always reports core events
[    75.641] (**) Option "Device" "/dev/input/event6"
[    75.641] (**) Option "_source" "server/udev"
[    75.642] (II) event6  - Microsoft Wired Keyboard 600: is tagged by udev as: Keyboard
[    75.642] (II) event6  - Microsoft Wired Keyboard 600: device is a keyboard
[    75.642] (II) event6  - Microsoft Wired Keyboard 600: device removed
[    75.642] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.3/1-3.1.3.4/1-3.1.3.4:1.0/0003:045E:07F8.0004/input/input6/event6"
[    75.642] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 12)
[    75.642] (**) Option "xkb_model" "pc105"
[    75.642] (**) Option "xkb_layout" "gb"
[    75.643] (II) event6  - Microsoft Wired Keyboard 600: is tagged by udev as: Keyboard
[    75.643] (II) event6  - Microsoft Wired Keyboard 600: device is a keyboard
[    75.644] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 Consumer Control (/dev/input/event7)
[    75.644] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    75.644] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "system-keyboard"
[    75.644] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600 Consumer Control'
[    75.645] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 29 paused 0
[    75.645] (**) Microsoft Wired Keyboard 600 Consumer Control: always reports core events
[    75.645] (**) Option "Device" "/dev/input/event7"
[    75.645] (**) Option "_source" "server/udev"
[    75.646] (II) event7  - Microsoft Wired Keyboard 600 Consumer Control: is tagged by udev as: Keyboard
[    75.646] (II) event7  - Microsoft Wired Keyboard 600 Consumer Control: device is a keyboard
[    75.646] (II) event7  - Microsoft Wired Keyboard 600 Consumer Control: device removed
[    75.646] (II) libinput: Microsoft Wired Keyboard 600 Consumer Control: needs a virtual subdevice
[    75.646] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.3/1-3.1.3.4/1-3.1.3.4:1.1/0003:045E:07F8.0005/input/input7/event7"
[    75.646] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600 Consumer Control" (type: MOUSE, id 13)
[    75.646] (**) Option "AccelerationScheme" "none"
[    75.646] (**) Microsoft Wired Keyboard 600 Consumer Control: (accel) selected scheme none/0
[    75.646] (**) Microsoft Wired Keyboard 600 Consumer Control: (accel) acceleration factor: 2.000
[    75.646] (**) Microsoft Wired Keyboard 600 Consumer Control: (accel) acceleration threshold: 4
[    75.647] (II) event7  - Microsoft Wired Keyboard 600 Consumer Control: is tagged by udev as: Keyboard
[    75.647] (II) event7  - Microsoft Wired Keyboard 600 Consumer Control: device is a keyboard
[    75.648] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 System Control (/dev/input/event8)
[    75.648] (**) Microsoft Wired Keyboard 600 System Control: Applying InputClass "libinput keyboard catchall"
[    75.648] (**) Microsoft Wired Keyboard 600 System Control: Applying InputClass "system-keyboard"
[    75.648] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600 System Control'
[    75.649] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 30 paused 0
[    75.649] (**) Microsoft Wired Keyboard 600 System Control: always reports core events
[    75.649] (**) Option "Device" "/dev/input/event8"
[    75.649] (**) Option "_source" "server/udev"
[    75.650] (II) event8  - Microsoft Wired Keyboard 600 System Control: is tagged by udev as: Keyboard
[    75.650] (II) event8  - Microsoft Wired Keyboard 600 System Control: device is a keyboard
[    75.650] (II) event8  - Microsoft Wired Keyboard 600 System Control: device removed
[    75.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.3/1-3.1.3.4/1-3.1.3.4:1.1/0003:045E:07F8.0005/input/input8/event8"
[    75.650] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600 System Control" (type: KEYBOARD, id 14)
[    75.650] (**) Option "xkb_model" "pc105"
[    75.650] (**) Option "xkb_layout" "gb"
[    75.651] (II) event8  - Microsoft Wired Keyboard 600 System Control: is tagged by udev as: Keyboard
[    75.651] (II) event8  - Microsoft Wired Keyboard 600 System Control: device is a keyboard
[    75.652] (II) config/udev: Adding input device Cam Link 4K: Cam Link 4K (/dev/input/event17)
[    75.652] (**) Cam Link 4K: Cam Link 4K: Applying InputClass "libinput keyboard catchall"
[    75.652] (**) Cam Link 4K: Cam Link 4K: Applying InputClass "system-keyboard"
[    75.652] (II) Using input driver 'libinput' for 'Cam Link 4K: Cam Link 4K'
[    75.653] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 31 paused 0
[    75.653] (**) Cam Link 4K: Cam Link 4K: always reports core events
[    75.653] (**) Option "Device" "/dev/input/event17"
[    75.653] (**) Option "_source" "server/udev"
[    75.654] (II) event17 - Cam Link 4K: Cam Link 4K: is tagged by udev as: Keyboard
[    75.654] (II) event17 - Cam Link 4K: Cam Link 4K: device is a keyboard
[    75.654] (II) event17 - Cam Link 4K: Cam Link 4K: device removed
[    75.654] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1.4/2-3.1.4:1.0/input/input17/event17"
[    75.654] (II) XINPUT: Adding extended input device "Cam Link 4K: Cam Link 4K" (type: KEYBOARD, id 15)
[    75.654] (**) Option "xkb_model" "pc105"
[    75.654] (**) Option "xkb_layout" "gb"
[    75.655] (II) event17 - Cam Link 4K: Cam Link 4K: is tagged by udev as: Keyboard
[    75.655] (II) event17 - Cam Link 4K: Cam Link 4K: device is a keyboard
[    75.655] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[    75.655] (II) No input driver specified, ignoring this device.
[    75.655] (II) This device may have been added with another device file.
[    75.655] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[    75.655] (II) No input driver specified, ignoring this device.
[    75.655] (II) This device may have been added with another device file.
[    75.656] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[    75.656] (II) No input driver specified, ignoring this device.
[    75.656] (II) This device may have been added with another device file.
[    75.656] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[    75.656] (II) No input driver specified, ignoring this device.
[    75.656] (II) This device may have been added with another device file.
[    75.656] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event15)
[    75.656] (II) No input driver specified, ignoring this device.
[    75.656] (II) This device may have been added with another device file.
[    75.656] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event16)
[    75.656] (II) No input driver specified, ignoring this device.
[    75.656] (II) This device may have been added with another device file.
[    75.656] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[    75.656] (II) No input driver specified, ignoring this device.
[    75.656] (II) This device may have been added with another device file.
[    75.657] (II) config/udev: Adding input device ITE8708 CIR transceiver (/dev/input/event10)
[    75.657] (**) ITE8708 CIR transceiver: Applying InputClass "libinput keyboard catchall"
[    75.657] (**) ITE8708 CIR transceiver: Applying InputClass "system-keyboard"
[    75.657] (II) Using input driver 'libinput' for 'ITE8708 CIR transceiver'
[    75.658] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 32 paused 0
[    75.658] (**) ITE8708 CIR transceiver: always reports core events
[    75.658] (**) Option "Device" "/dev/input/event10"
[    75.658] (**) Option "_source" "server/udev"
[    75.658] (II) event10 - ITE8708 CIR transceiver: is tagged by udev as: Keyboard
[    75.658] (II) event10 - ITE8708 CIR transceiver: device is a keyboard
[    75.658] (II) event10 - ITE8708 CIR transceiver: device removed
[    75.658] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input9/event10"
[    75.658] (II) XINPUT: Adding extended input device "ITE8708 CIR transceiver" (type: KEYBOARD, id 16)
[    75.658] (**) Option "xkb_model" "pc105"
[    75.658] (**) Option "xkb_layout" "gb"
[    75.659] (II) event10 - ITE8708 CIR transceiver: is tagged by udev as: Keyboard
[    75.659] (II) event10 - ITE8708 CIR transceiver: device is a keyboard
[    75.662] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    75.662] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "system-keyboard"
[    75.662] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600 Consumer Control'
[    75.662] (II) systemd-logind: returning pre-existing fd for /dev/input/event7 13:71
[    75.662] (**) Microsoft Wired Keyboard 600 Consumer Control: always reports core events
[    75.662] (**) Option "Device" "/dev/input/event7"
[    75.662] (**) Option "_source" "_driver/libinput"
[    75.662] (II) libinput: Microsoft Wired Keyboard 600 Consumer Control: is a virtual subdevice
[    75.662] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.3/1-3.1.3.4/1-3.1.3.4:1.1/0003:045E:07F8.0005/input/input7/event7"
[    75.662] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600 Consumer Control" (type: KEYBOARD, id 17)
[    75.662] (**) Option "xkb_model" "pc105"
[    75.662] (**) Option "xkb_layout" "gb"
[    77.183] (**) Option "fd" "20"
[    77.183] (II) event2  - Power Button: device removed
[    77.183] (**) Option "fd" "23"
[    77.183] (II) event3  - Video Bus: device removed
[    77.183] (**) Option "fd" "24"
[    77.183] (II) event1  - Power Button: device removed
[    77.183] (**) Option "fd" "25"
[    77.183] (II) event0  - Sleep Button: device removed
[    77.183] (**) Option "fd" "26"
[    77.183] (II) event4  - GeneralPlus USB Audio Device: device removed
[    77.183] (**) Option "fd" "27"
[    77.183] (II) event5  - PixArt Microsoft USB Optical Mouse: device removed
[    77.183] (**) Option "fd" "28"
[    77.183] (II) event6  - Microsoft Wired Keyboard 600: device removed
[    77.183] (**) Option "fd" "29"
[    77.183] (**) Option "fd" "30"
[    77.183] (II) event8  - Microsoft Wired Keyboard 600 System Control: device removed
[    77.183] (**) Option "fd" "31"
[    77.184] (II) event17 - Cam Link 4K: Cam Link 4K: device removed
[    77.184] (**) Option "fd" "32"
[    77.184] (II) event10 - ITE8708 CIR transceiver: device removed
[    77.184] (**) Option "fd" "29"
[    77.184] (II) event7  - Microsoft Wired Keyboard 600 Consumer Control: device removed
[    77.189] (II) UnloadModule: "libinput"
[    77.189] (II) systemd-logind: not releasing fd for 13:71, still in use
[    77.189] (II) UnloadModule: "libinput"
[    77.189] (II) systemd-logind: releasing fd for 13:74
[    77.206] (II) UnloadModule: "libinput"
[    77.206] (II) systemd-logind: releasing fd for 13:81
[    77.258] (II) UnloadModule: "libinput"
[    77.258] (II) systemd-logind: releasing fd for 13:72
[    77.274] (II) UnloadModule: "libinput"
[    77.274] (II) systemd-logind: releasing fd for 13:71
[    77.290] (II) UnloadModule: "libinput"
[    77.290] (II) systemd-logind: releasing fd for 13:70
[    77.306] (II) UnloadModule: "libinput"
[    77.306] (II) systemd-logind: releasing fd for 13:69
[    77.338] (II) UnloadModule: "libinput"
[    77.338] (II) systemd-logind: releasing fd for 13:68
[    77.378] (II) UnloadModule: "libinput"
[    77.378] (II) systemd-logind: releasing fd for 13:64
[    77.406] (II) UnloadModule: "libinput"
[    77.406] (II) systemd-logind: releasing fd for 13:65
[    77.422] (II) UnloadModule: "libinput"
[    77.422] (II) systemd-logind: releasing fd for 13:67
[    77.473] (II) UnloadModule: "libinput"
[    77.473] (II) systemd-logind: releasing fd for 13:66
[    77.527] (II) Server terminated successfully (0). Closing log file.
User avatar
steve1961
 
Posts: 63
Joined: 2005-10-16 21:07
Location: Coventry, UK

Re: Openbox-session not working with lightdm

Postby Head_on_a_Stick » 2020-02-23 11:45

steve1961 wrote:Here's the log immediately after the fail

There are no errors in that log.

I ask again:
I wrote:So what actually happens? What do you see, exactly?

For example, if I start /usr/bin/openbox-session with empty autostart & environment files I see a black screen with a mouse cursor, the openbox menu appears when I right-click.
User avatar
Head_on_a_Stick
 
Posts: 11489
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: Openbox-session not working with lightdm

Postby Deb-fan » 2020-02-23 12:00

Did you try setting it as default x-session? Then simply using startx at login. Might try checking what it's/openbox is set as in update-alternatives --config x-window-manager too. Though what's set default x-session overrides that. If were using it as default wm, no idea what lightdm would set it to. Surely not openbox-session. Though should still work with startx + full path I guess. Would check what's set anyway. Wondering how you went about all this lightdm config'ing, what all/how you set ob to be Mate's wm? Your situation is a head scratcher to me. Never had issues like those and started openbox tons of ways. Gdm, slim, nodm, lightdm, without a DM via xinitrc and update-alternatives. Time being using an xinitrc file ( just has an exec openbox-session line in it I uncomment when wanting to use OB) and exec'ing the startx cmd from the .profile file in my users /home. Only reason I've switched back to using an xinitrc file is fluxbox wouldn't behave without one.
Deb-fan
 
Posts: 681
Joined: 2012-08-14 12:27

Re: Openbox-session not working with lightdm

Postby steve1961 » 2020-02-23 13:01

Head_on_a_Stick wrote:
steve1961 wrote:Here's the log immediately after the fail

There are no errors in that log.

I ask again:
I wrote:So what actually happens? What do you see, exactly?

For example, if I start /usr/bin/openbox-session with empty autostart & environment files I see a black screen with a mouse cursor, the openbox menu appears when I right-click.


What I see is text as it starts to launch a session and then it just dumps me back to the prompt without an error message. No right click menu, just a TTY. I'm using openbox successfully on Arch and Ubuntu so not sure what is going on here. As a test I installed Debian again in a virtual machine and that also worked fine with my standard lightdm.conf . I have it set up as the default x-session.

I can launch openbox with the openbox command but not the openbox-session command. I've uninstalled and reinstalled a few times but no difference
User avatar
steve1961
 
Posts: 63
Joined: 2005-10-16 21:07
Location: Coventry, UK

Next

Return to Desktop & Multimedia

Who is online

Users browsing this forum: No registered users and 10 guests

fashionable