[AMD/ATI] RV200 [Radeon 7500/7500 LE] and Jessie

Getting your soundcard to work, using Debian on non-i386 hardware, etc

[AMD/ATI] RV200 [Radeon 7500/7500 LE] and Jessie

Postby ramack » 2013-12-21 18:32

After a dist-upgrade and then a fresh install of Testing, the TV function of my older ATI card has stopped. For several years Xawtv has worked great until earlier this year until I started receiving something similar to
Code: Select all
$ xawtv
This is xawtv-3.103, running on Linux/i686 (3.11-2-686-pae)
xinerama 0: 1280x1024+0+0
vid-open-auto: failed to open a capture device
vid-open: could not find a suitable videodev
no video grabber device available


Following the HowTo below has typically resulted in a functioning video card with TV capabilities.
https://wiki.debian.org/AtiHowTo
Starting this past June Xawtv stopped working again and by trial/error I found that I could get zapping TV to work with Xvideo if I set
/etc/modprobe.d/radeonkms.conf
Code: Select all
# default = 1
# options radeon modeset=1
options radeon modeset=0


But now with the fresh install, although the card is working well enough for just X, the TV function is not. From my limited knowledge/understanding of really what to look for, it appears that Xvideo has stopped working which is what Zapping had used.

This is on an AMD i386 box,
uname -a
Code: Select all
$ uname -a
Linux debiantv 3.11-2-686-pae #1 SMP Debian 3.11.10-1 (2013-12-04) i686 GNU/Linux


lspci output pertaning to the video card
Code: Select all
$ lspci
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV200 [Radeon 7500/7500 LE]


/var/log/Xorg.0.log
Code: Select all
ramack@debiantv:~$ cat /var/log/Xorg.0.log
[    69.960]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[    69.960] X Protocol Version 11, Revision 0
[    69.960] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[    69.960] Current Operating System: Linux debiantv 3.11-2-686-pae #1 SMP Debian 3.11.10-1 (2013-12-04) i686
[    69.960] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11-2-686-pae root=UUID=e4e94a78-81f3-4892-b6c3-b5840cdba97c ro quiet
[    69.960] Build Date: 25 November 2013  03:36:53PM
[    69.960] xorg-server 2:1.14.3-5 (Maarten Lankhorst <maarten.lankhorst@ubuntu.com>)
[    69.960] Current version of pixman: 0.30.2
[    69.960]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    69.960] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    69.961] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 21 08:30:55 2013
[    70.019] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    70.225] (==) No Layout section.  Using the first Screen section.
[    70.225] (==) No screen section available. Using defaults.
[    70.226] (**) |-->Screen "Default Screen Section" (0)
[    70.226] (**) |   |-->Monitor "<default monitor>"
[    70.239] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    70.239] (==) Automatically adding devices
[    70.239] (==) Automatically enabling devices
[    70.239] (==) Automatically adding GPU devices
[    70.418] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    70.418]    Entry deleted from font path.
[    70.486] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   built-ins
[    70.486] (==) ModulePath set to "/usr/lib/xorg/modules"
[    70.486] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    70.486] (II) Loader magic: 0xb77be6a0
[    70.486] (II) Module ABI versions:
[    70.486]    X.Org ANSI C Emulation: 0.4
[    70.486]    X.Org Video Driver: 14.1
[    70.486]    X.Org XInput driver : 19.1
[    70.486]    X.Org Server Extension : 7.0
[    70.487] (II) xfree86: Adding drm device (/dev/dri/card0)
[    70.489] (--) PCI:*(0:1:0:0) 1002:5157:1002:0f2a rev 0, Mem @ 0xd0000000/134217728, 0xdfef0000/65536, I/O @ 0x0000a800/256, BIOS @ 0x????????/131072
[    70.492] (II) Open ACPI successful (/var/run/acpid.socket)
[    70.602] Initializing built-in extension Generic Event Extension
[    70.602] Initializing built-in extension SHAPE
[    70.602] Initializing built-in extension MIT-SHM
[    70.602] Initializing built-in extension XInputExtension
[    70.602] Initializing built-in extension XTEST
[    70.602] Initializing built-in extension BIG-REQUESTS
[    70.602] Initializing built-in extension SYNC
[    70.602] Initializing built-in extension XKEYBOARD
[    70.602] Initializing built-in extension XC-MISC
[    70.602] Initializing built-in extension SECURITY
[    70.602] Initializing built-in extension XINERAMA
[    70.602] Initializing built-in extension XFIXES
[    70.602] Initializing built-in extension RENDER
[    70.602] Initializing built-in extension RANDR
[    70.602] Initializing built-in extension COMPOSITE
[    70.602] Initializing built-in extension DAMAGE
[    70.602] Initializing built-in extension MIT-SCREEN-SAVER
[    70.602] Initializing built-in extension DOUBLE-BUFFER
[    70.602] Initializing built-in extension RECORD
[    70.602] Initializing built-in extension DPMS
[    70.602] Initializing built-in extension X-Resource
[    70.602] Initializing built-in extension XVideo
[    70.602] Initializing built-in extension XVideo-MotionCompensation
[    70.602] Initializing built-in extension SELinux
[    70.603] Initializing built-in extension XFree86-VidModeExtension
[    70.603] Initializing built-in extension XFree86-DGA
[    70.603] Initializing built-in extension XFree86-DRI
[    70.603] Initializing built-in extension DRI2
[    70.603] (II) LoadModule: "glx"
[    70.629] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    70.692] (II) Module glx: vendor="X.Org Foundation"
[    70.692]    compiled for 1.14.3, module version = 1.0.0
[    70.692]    ABI class: X.Org Server Extension, version 7.0
[    70.692] (==) AIGLX enabled
[    70.701] Loading extension GLX
[    70.701] (==) Matched ati as autoconfigured driver 0
[    70.701] (==) Matched ati as autoconfigured driver 1
[    70.701] (==) Matched vesa as autoconfigured driver 2
[    70.701] (==) Matched modesetting as autoconfigured driver 3
[    70.701] (==) Matched fbdev as autoconfigured driver 4
[    70.701] (==) Assigned the driver to the xf86ConfigLayout
[    70.701] (II) LoadModule: "ati"
[    70.704] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    70.717] (II) Module ati: vendor="X.Org Foundation"
[    70.717]    compiled for 1.14.3, module version = 7.2.0
[    70.717]    Module class: X.Org Video Driver
[    70.717]    ABI class: X.Org Video Driver, version 14.1
[    70.717] (II) LoadModule: "radeon"
[    70.718] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    70.789] (II) Module radeon: vendor="X.Org Foundation"
[    70.789]    compiled for 1.14.3, module version = 7.2.0
[    70.789]    Module class: X.Org Video Driver
[    70.789]    ABI class: X.Org Video Driver, version 14.1
[    70.789] (II) LoadModule: "vesa"
[    70.789] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    70.811] (II) Module vesa: vendor="X.Org Foundation"
[    70.811]    compiled for 1.14.3, module version = 2.3.3
[    70.811]    Module class: X.Org Video Driver
[    70.811]    ABI class: X.Org Video Driver, version 14.1
[    70.811] (II) LoadModule: "modesetting"
[    70.812] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    70.824] (II) Module modesetting: vendor="X.Org Foundation"
[    70.824]    compiled for 1.14.3, module version = 0.8.1
[    70.824]    Module class: X.Org Video Driver
[    70.824]    ABI class: X.Org Video Driver, version 14.1
[    70.824] (II) LoadModule: "fbdev"
[    70.825] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    70.835] (II) Module fbdev: vendor="X.Org Foundation"
[    70.835]    compiled for 1.14.3, module version = 0.4.4
[    70.835]    Module class: X.Org Video Driver
[    70.835]    ABI class: X.Org Video Driver, version 14.1
[    70.835] (II) RADEON: Driver for ATI Radeon chipsets:
   ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
   ATI Radeon Mobility X300 (M24) 3152 (PCIE),
   ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
   ATI Radeon X600 (RV380) 3E50 (PCIE),
   ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
   ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
   ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
   ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
   ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
   ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
   ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
   ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
   ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
   ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
   ATI Radeon IGP330M/340M/350M (U2) 4337,
   ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
   ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
   ATI Radeon X800PRO (R420) JI (AGP),
   ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
   ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
   ATI Radeon Mobility 9800 (M18) JN (AGP),
   ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
   ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
   ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
   ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
   ATI Radeon Mobility M7 LW (AGP),
   ATI Mobility FireGL 7800 M7 LX (AGP),
   ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
   ATI FireGL Mobility 9000 (M9) Ld (AGP),
   ATI Radeon Mobility 9000 (M9) Lf (AGP),
   ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
   ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
   ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
   ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
   ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
   ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
   ATI Radeon Mobility 9600 (M10) NQ (AGP),
   ATI Radeon Mobility 9600 (M11) NR (AGP),
   ATI Radeon Mobility 9600 (M10) NS (AGP),
   ATI FireGL Mobility T2 (M10) NT (AGP),
   ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
   ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
   ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
   ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
   ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
   ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
   ATI Radeon Mobility X300 (M22) 5460 (PCIE),
   ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
   ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
   ATI Radeon X800PRO (R423) UI (PCIE),
   ATI Radeon X800LE (R423) UJ (PCIE),
   ATI Radeon X800SE (R423) UK (PCIE),
   ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
   ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
   ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
   ATI FireGL unknown (R423) UR (PCIE),
   ATI FireGL unknown (R423) UT (PCIE),
   ATI Mobility FireGL V5000 (M26) (PCIE),
   ATI Mobility FireGL V5000 (M26) (PCIE),
   ATI Mobility Radeon X700 XL (M26) (PCIE),
   ATI Mobility Radeon X700 (M26) (PCIE),
   ATI Mobility Radeon X700 (M26) (PCIE),
   ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
   ATI Radeon Mobility 9100 IGP (U3) 5835,
   ATI Radeon XPRESS 200 5954 (PCIE),
   ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
   ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
   ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
   ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
   ATI Radeon XPRESS 200M 5975 (PCIE),
   ATI Radeon XPRESS 200 5A41 (PCIE),
   ATI Radeon XPRESS 200M 5A42 (PCIE),
   ATI Radeon XPRESS 200 5A61 (PCIE),
   ATI Radeon XPRESS 200M 5A62 (PCIE),
   ATI Radeon X300 (RV370) 5B60 (PCIE),
   ATI Radeon X600 (RV370) 5B62 (PCIE),
   ATI Radeon X550 (RV370) 5B63 (PCIE),
   ATI FireGL V3100 (RV370) 5B64 (PCIE),
   ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
   ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
   ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
   ATI Mobility Radeon X800 XT (M28) (PCIE),
   ATI Mobility FireGL V5100 (M28) (PCIE),
   ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
   ATI Radeon X850 XT PE (R480) (PCIE),
   ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
   ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
   ATI Radeon X850 XT (R480) (PCIE),
   ATI Radeon X800XT (R423) 5D57 (PCIE),
   ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
   ATI Radeon X700 PRO (RV410) (PCIE),
   ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
   ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
   ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
   ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
   ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
   ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
   ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
   ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
   ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
   ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
   ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
   ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
   ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
   ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
   ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
   ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
   ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
   ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
   ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
   ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
   ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
   ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
   ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
   ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
   ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
   ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
   ATI Mobility Radeon X1700, ATI Radeon X2300HD,
   ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
   ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
   ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
   ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
   ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
   ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
   ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
   ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
   ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
   ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
   ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
   ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
   ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
   ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
   ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
   ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
   AMD FireStream 9250, ATI FirePro V8700 (FireGL),
   ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
   ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
   ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
   ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
   ATI Mobility Radeon HD 4670, ATI FirePro M5750,
   ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
   ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
   ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
   ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
   ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
   ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
   ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
   ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
   ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
   ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
   ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
   ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
   ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
   ATI Mobility Radeon HD 3850 X2, ATI RV670,
   ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
   ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
   ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
   ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
   ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
   ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
   ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
   ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
   ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
   ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
   ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
   ATI FireGL V3600, ATI Radeon HD 2600 LE,
   ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
   ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
   ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
   ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
   ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
   ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
   ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
   ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
   ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
   ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
   ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
   ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
   ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
   SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
   ATI Radeon 4100, ATI Mobility Radeon HD 4200,
   ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
   AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
   AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
   AMD Radeon HD 6300 Series Graphics,
   AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
   AMD Firestream 9350, ATI Radeon HD 5800 Series,
   ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
   ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
   ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
   ATI Mobility Radeon HD 5800 Series,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
   ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
   ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
   ATI Mobility Radeon HD 5000 Series,
   ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
   ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
   ATI Mobility Radeon HD 5000 Series,
   ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
   ATI Mobility Radeon Graphics, CEDAR,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
   ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
   CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
   AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
   CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
   BARTS, BARTS, Mobility Radeon HD 6000 Series,
   Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
   AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
   AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
   TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
   TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
   CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
   CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
   ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
   ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
   ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
   ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
   TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
   TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
   PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
   VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
   VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
   VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
   OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
   HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
   BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
   KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
   KABINI, KABINI, KABINI
[    70.843] (II) VESA: driver for VESA chipsets: vesa
[    70.843] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    70.843] (II) FBDEV: driver for framebuffer: fbdev
[    70.843] (++) using VT number 7

[    70.942] (II) [KMS] Kernel modesetting enabled.
[    70.942] (WW) Falling back to old probe method for vesa
[    70.942] (WW) Falling back to old probe method for modesetting
[    70.943] (WW) Falling back to old probe method for fbdev
[    70.943] (II) Loading sub module "fbdevhw"
[    70.943] (II) LoadModule: "fbdevhw"
[    70.943] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    71.029] (II) Module fbdevhw: vendor="X.Org Foundation"
[    71.029]    compiled for 1.14.3, module version = 0.0.2
[    71.029]    ABI class: X.Org Video Driver, version 14.1
[    71.029] (II) RADEON(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    71.029] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    71.030] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    71.030] (==) RADEON(0): Default visual is TrueColor
[    71.030] (==) RADEON(0): RGB weight 888
[    71.030] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    71.030] (--) RADEON(0): Chipset: "ATI Radeon 7500 QW (AGP/PCI)" (ChipID = 0x5157)
[    71.030] (II) RADEON(0): GPU accel disabled or not working, using shadowfb for KMS
[    71.030] (II) Loading sub module "shadow"
[    71.030] (II) LoadModule: "shadow"
[    71.030] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    71.032] (II) Module shadow: vendor="X.Org Foundation"
[    71.032]    compiled for 1.14.3, module version = 1.1.0
[    71.032]    ABI class: X.Org ANSI C Emulation, version 0.4
[    71.033] (II) RADEON(0): KMS Color Tiling: disabled
[    71.033] (II) RADEON(0): KMS Color Tiling 2D: disabled
[    71.033] (II) RADEON(0): KMS Pageflipping: enabled
[    71.033] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    71.065] (II) RADEON(0): Output DVI-0 has no monitor section
[    71.078] (II) RADEON(0): Output S-video has no monitor section
[    71.129] (II) RADEON(0): EDID for output DVI-0
[    71.129] (II) RADEON(0): Manufacturer: HWP  Model: 26eb  Serial#: 16843009
[    71.129] (II) RADEON(0): Year: 2009  Week: 7
[    71.129] (II) RADEON(0): EDID Version: 1.3
[    71.129] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    71.129] (II) RADEON(0): Sync:  Separate
[    71.129] (II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[    71.129] (II) RADEON(0): Gamma: 2.40
[    71.129] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    71.129] (II) RADEON(0): Default color space is primary color space
[    71.129] (II) RADEON(0): First detailed timing is preferred mode
[    71.129] (II) RADEON(0): redX: 0.640 redY: 0.349   greenX: 0.284 greenY: 0.617
[    71.130] (II) RADEON(0): blueX: 0.142 blueY: 0.067   whiteX: 0.313 whiteY: 0.329
[    71.130] (II) RADEON(0): Supported established timings:
[    71.130] (II) RADEON(0): 720x400@70Hz
[    71.130] (II) RADEON(0): 640x480@60Hz
[    71.130] (II) RADEON(0): 640x480@72Hz
[    71.130] (II) RADEON(0): 640x480@75Hz
[    71.130] (II) RADEON(0): 800x600@60Hz
[    71.130] (II) RADEON(0): 800x600@72Hz
[    71.130] (II) RADEON(0): 800x600@75Hz
[    71.130] (II) RADEON(0): 832x624@75Hz
[    71.130] (II) RADEON(0): 1024x768@60Hz
[    71.130] (II) RADEON(0): 1024x768@70Hz
[    71.130] (II) RADEON(0): 1024x768@75Hz
[    71.130] (II) RADEON(0): 1280x1024@75Hz
[    71.130] (II) RADEON(0): 1152x864@75Hz
[    71.130] (II) RADEON(0): Manufacturer's mask: 0
[    71.130] (II) RADEON(0): Supported standard timings:
[    71.130] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    71.130] (II) RADEON(0): Supported detailed timing:
[    71.130] (II) RADEON(0): clock: 108.0 MHz   Image Size:  340 x 270 mm
[    71.130] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    71.130] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    71.130] (II) RADEON(0): Ranges: V min: 50 V max: 77 Hz, H min: 24 H max: 83 kHz, PixClock max 145 MHz
[    71.130] (II) RADEON(0): Monitor name: HP L1710
[    71.130] (II) RADEON(0): Serial No: 3CQ907123F
[    71.130] (II) RADEON(0): EDID (in hex):
[    71.130] (II) RADEON(0):    00ffffffffffff0022f0eb2601010101
[    71.130] (II) RADEON(0):    0713010368221b8ceedc55a359489e24
[    71.130] (II) RADEON(0):    115054adef8081800101010101010101
[    71.130] (II) RADEON(0):    010101010101302a009851002a403070
[    71.130] (II) RADEON(0):    1300540e1100001e000000fd00324d18
[    71.130] (II) RADEON(0):    530e000a202020202020000000fc0048
[    71.130] (II) RADEON(0):    50204c313731300a20202020000000ff
[    71.130] (II) RADEON(0):    00334351393037313233460a202000fc
[    71.130] (II) RADEON(0): Printing probed modes for output DVI-0
[    71.130] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    71.130] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    71.130] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    71.130] (II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    71.130] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    71.130] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    71.130] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    71.130] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    71.130] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    71.130] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    71.130] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    71.130] (II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    71.130] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    71.130] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    71.138] (II) RADEON(0): EDID for output S-video
[    71.138] (II) RADEON(0): Output DVI-0 connected
[    71.138] (II) RADEON(0): Output S-video disconnected
[    71.138] (II) RADEON(0): Using exact sizes for initial modes
[    71.138] (II) RADEON(0): Output DVI-0 using initial mode 1280x1024
[    71.138] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    71.138] (II) RADEON(0): mem size init: gart size :1feff000 vram size: s:4000000 visible:3ac0000
[    71.138] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    71.138] (==) RADEON(0): DPI set to (96, 96)
[    71.138] (II) Loading sub module "fb"
[    71.138] (II) LoadModule: "fb"
[    71.138] (II) Loading /usr/lib/xorg/modules/libfb.so
[    71.254] (II) Module fb: vendor="X.Org Foundation"
[    71.254]    compiled for 1.14.3, module version = 1.0.0
[    71.254]    ABI class: X.Org ANSI C Emulation, version 0.4
[    71.254] (II) Loading sub module "ramdac"
[    71.254] (II) LoadModule: "ramdac"
[    71.254] (II) Module "ramdac" already built-in
[    71.254] (II) UnloadModule: "vesa"
[    71.254] (II) Unloading vesa
[    71.254] (II) UnloadModule: "modesetting"
[    71.254] (II) Unloading modesetting
[    71.254] (II) UnloadModule: "fbdev"
[    71.254] (II) Unloading fbdev
[    71.254] (II) UnloadSubModule: "fbdevhw"
[    71.254] (II) Unloading fbdevhw
[    71.254] (--) Depth 24 pixmap format is 32 bpp
[    71.275] (II) RADEON(0): Front buffer size: 5120K
[    71.275] (II) RADEON(0): VRAM usage limit set to 49507K
[    71.332] (==) RADEON(0): Backing store disabled
[    71.332] (WW) RADEON(0): Direct rendering disabled
[    71.332] (II) RADEON(0): Acceleration disabled
[    71.332] (==) RADEON(0): DPMS enabled
[    71.332] (==) RADEON(0): Silken mouse enabled
[    71.332] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    71.346] (--) RandR disabled
[    71.364] (II) SELinux: Disabled on system
[    71.366] (II) AIGLX: Screen 0 is not DRI2 capable
[    71.366] (II) AIGLX: Screen 0 is not DRI capable
[    72.373] (II) AIGLX: Loaded and initialized swrast
[    72.373] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    72.402] (II) RADEON(0): Setting screen physical size to 338 x 270
[    73.012] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    73.012] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    73.012] (II) LoadModule: "evdev"
[    73.016] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    73.069] (II) Module evdev: vendor="X.Org Foundation"
[    73.069]    compiled for 1.14.3, module version = 2.8.2
[    73.069]    Module class: X.Org XInput Driver
[    73.069]    ABI class: X.Org XInput driver, version 19.1
[    73.069] (II) Using input driver 'evdev' for 'Power Button'
[    73.069] (**) Power Button: always reports core events
[    73.069] (**) evdev: Power Button: Device: "/dev/input/event4"
[    73.069] (--) evdev: Power Button: Vendor 0 Product 0x1
[    73.069] (--) evdev: Power Button: Found keys
[    73.069] (II) evdev: Power Button: Configuring as keyboard
[    73.069] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    73.069] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    73.069] (**) Option "xkb_rules" "evdev"
[    73.069] (**) Option "xkb_model" "pc105"
[    73.069] (**) Option "xkb_layout" "us"
[    73.071] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    73.071] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    73.071] (II) Using input driver 'evdev' for 'Power Button'
[    73.071] (**) Power Button: always reports core events
[    73.071] (**) evdev: Power Button: Device: "/dev/input/event2"
[    73.071] (--) evdev: Power Button: Vendor 0 Product 0x1
[    73.071] (--) evdev: Power Button: Found keys
[    73.071] (II) evdev: Power Button: Configuring as keyboard
[    73.071] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    73.071] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    73.071] (**) Option "xkb_rules" "evdev"
[    73.071] (**) Option "xkb_model" "pc105"
[    73.071] (**) Option "xkb_layout" "us"
[    73.072] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    73.072] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    73.072] (II) Using input driver 'evdev' for 'Sleep Button'
[    73.072] (**) Sleep Button: always reports core events
[    73.072] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    73.073] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    73.073] (--) evdev: Sleep Button: Found keys
[    73.073] (II) evdev: Sleep Button: Configuring as keyboard
[    73.073] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[    73.073] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    73.073] (**) Option "xkb_rules" "evdev"
[    73.073] (**) Option "xkb_model" "pc105"
[    73.073] (**) Option "xkb_layout" "us"
[    73.073] (II) config/udev: Adding drm device (/dev/dri/card0)
[    73.074] (II) config/udev: Adding input device Logitech USB Mouse (/dev/input/event1)
[    73.074] (**) Logitech USB Mouse: Applying InputClass "evdev pointer catchall"
[    73.074] (II) Using input driver 'evdev' for 'Logitech USB Mouse'
[    73.074] (**) Logitech USB Mouse: always reports core events
[    73.074] (**) evdev: Logitech USB Mouse: Device: "/dev/input/event1"
[    73.074] (--) evdev: Logitech USB Mouse: Vendor 0x46d Product 0xc001
[    73.074] (--) evdev: Logitech USB Mouse: Found 3 mouse buttons
[    73.074] (--) evdev: Logitech USB Mouse: Found scroll wheel(s)
[    73.074] (--) evdev: Logitech USB Mouse: Found relative axes
[    73.074] (--) evdev: Logitech USB Mouse: Found x and y relative axes
[    73.075] (II) evdev: Logitech USB Mouse: Configuring as mouse
[    73.075] (II) evdev: Logitech USB Mouse: Adding scrollwheel support
[    73.075] (**) evdev: Logitech USB Mouse: YAxisMapping: buttons 4 and 5
[    73.075] (**) evdev: Logitech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    73.075] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.2/usb3/3-1/3-1:1.0/input/input1/event1"
[    73.075] (II) XINPUT: Adding extended input device "Logitech USB Mouse" (type: MOUSE, id 9)
[    73.075] (II) evdev: Logitech USB Mouse: initialized for relative axes.
[    73.075] (**) Logitech USB Mouse: (accel) keeping acceleration scheme 1
[    73.075] (**) Logitech USB Mouse: (accel) acceleration profile 0
[    73.075] (**) Logitech USB Mouse: (accel) acceleration factor: 2.000
[    73.075] (**) Logitech USB Mouse: (accel) acceleration threshold: 4
[    73.076] (II) config/udev: Adding input device Logitech USB Mouse (/dev/input/mouse0)
[    73.076] (II) No input driver specified, ignoring this device.
[    73.076] (II) This device may have been added with another device file.
[    73.077] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    73.077] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    73.077] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    73.077] (**) AT Translated Set 2 keyboard: always reports core events
[    73.077] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    73.077] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    73.077] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    73.077] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    73.077] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    73.077] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    73.077] (**) Option "xkb_rules" "evdev"
[    73.077] (**) Option "xkb_model" "pc105"
[    73.077] (**) Option "xkb_layout" "us"
[    73.078] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6)
[    73.078] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[    73.078] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[    73.078] (**) PS/2 Generic Mouse: always reports core events
[    73.078] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event6"
[    73.078] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[    73.078] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[    73.078] (--) evdev: PS/2 Generic Mouse: Found relative axes
[    73.078] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[    73.078] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[    73.078] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[    73.078] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    73.078] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[    73.078] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11)
[    73.079] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[    73.079] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[    73.079] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[    73.079] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[    73.079] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[    73.079] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[    73.079] (II) No input driver specified, ignoring this device.
[    73.079] (II) This device may have been added with another device file.
[    73.080] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    73.080] (II) No input driver specified, ignoring this device.
[    73.080] (II) This device may have been added with another device file.
[   122.084] (II) RADEON(0): EDID vendor "HWP", prod id 9963
[   122.084] (II) RADEON(0): Using EDID range info for horizontal sync
[   122.084] (II) RADEON(0): Using EDID range info for vertical refresh
[   122.084] (II) RADEON(0): Printing DDC gathered Modelines:
[   122.084] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   122.084] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   122.084] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   122.084] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   122.084] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   122.084] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   122.084] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   122.084] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   122.084] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   122.084] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   122.084] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   122.084] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   122.085] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   122.085] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   129.290] (II) RADEON(0): EDID vendor "HWP", prod id 9963
[   129.291] (II) RADEON(0): Using hsync ranges from config file
[   129.291] (II) RADEON(0): Using vrefresh ranges from config file
[   129.291] (II) RADEON(0): Printing DDC gathered Modelines:
[   129.291] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   129.291] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   129.291] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   129.291] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   129.291] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   129.291] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   129.291] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   129.291] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   129.291] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   129.291] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   129.291] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   129.291] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   129.291] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   129.291] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   129.336] (II) RADEON(0): EDID vendor "HWP", prod id 9963
[   129.337] (II) RADEON(0): Using hsync ranges from config file
[   129.337] (II) RADEON(0): Using vrefresh ranges from config file
[   129.337] (II) RADEON(0): Printing DDC gathered Modelines:
[   129.337] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   129.337] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   129.337] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   129.337] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   129.337] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   129.337] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   129.337] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   129.337] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   129.337] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   129.337] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   129.337] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   129.337] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   129.337] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   129.337] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
homemade AMD64, Acer AspireOne 150, Asus eeePC 900, i386; Testing
i386,Dell Vostro 1000 AMD64, Dell Inspiron 1100; Sid
XFCE on all.
ramack
 
Posts: 463
Joined: 2008-01-28 15:31
Location: Centennial, CO

Re: [AMD/ATI] RV200 [Radeon 7500/7500 LE] and Jessie

Postby ramack » 2013-12-21 18:34

Part II

output of dmesg
Code: Select all
$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11-2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.11.10-1 (2013-12-04)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000cc000-0x00000000000d3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007fff8000-0x000000007fffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Legacy DMI 2.3 present.
[    0.000000] DMI:          K7VT4APro /K7VT4APro , BIOS P1.80 08/07/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 base 0E0000000 mask FFC000000 write-combining
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[    0.000000]  [mem 0x37600000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff]
[    0.000000]  [mem 0x34000000-0x375fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[    0.000000]  [mem 0x37800000-0x379fdfff] page 4k
[    0.000000] BRK [0x016aa000, 0x016aafff] PGTABLE
[    0.000000] BRK [0x016ab000, 0x016acfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x367ac000-0x373cdfff]
[    0.000000] ACPI: RSDP 000fa890 00014 (v00 AMI   )
[    0.000000] ACPI: RSDT 7fff0000 0002C (v01 AMIINT VIA_K7   00000010 MSFT 00000097)
[    0.000000] ACPI: FACP 7fff0030 00081 (v01 AMIINT VIA_K7   00000011 MSFT 00000097)
[    0.000000] ACPI: DSDT 7fff0120 03502 (v01    VIA    K7VT4 00001000 INTL 02002024)
[    0.000000] ACPI: FACS 7fff8000 00040
[    0.000000] ACPI: APIC 7fff00c0 00054 (v01 AMIINT VIA_K7   00000009 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1157MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] BRK [0x016ad000, 0x016adfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x379fdfff]
[    0.000000]   HighMem  [mem 0x379fe000-0x7ffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7ffeffff]
[    0.000000] On node 0 totalpages: 524174
[    0.000000] free_area_init_node: node 0, pgdat c157b680, node_mem_map f57ac020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2316 pages used for memmap
[    0.000000]   HighMem zone: 296434 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000cc000-0x000d3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f79e4000 s35776 r0 d21568 u57344
[    0.000000] pcpu-alloc: s35776 r0 d21568 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522394
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11-2-686-pae root=UUID=e4e94a78-81f3-4892-b6c3-b5840cdba97c ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0007fff0)
[    0.000000] Memory: 2060080K/2096696K available (4039K kernel code, 360K rwdata, 1244K rodata, 516K init, 572K bss, 36616K reserved, 1185736K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd35000 - 0xfffff000   (2856 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc1586000 - 0xc1607000   ( 516 kB)
[    0.000000]       .data : 0xc13f1fb4 - 0xc1585300   (1612 kB)
[    0.000000]       .text : 0xc1000000 - 0xc13f1fb4   (4039 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]    RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f7406000 soft=f7408000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1665.016 MHz processor
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3330.03 BogoMIPS (lpj=6660064)
[    0.004010] pid_max: default: 32768 minimum: 301
[    0.004069] Security Framework initialized
[    0.004083] AppArmor: AppArmor disabled by boot time parameter
[    0.004086] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004115] Mount-cache hash table entries: 512
[    0.008156] Initializing cgroup subsys memory
[    0.008200] Initializing cgroup subsys devices
[    0.008204] Initializing cgroup subsys freezer
[    0.008209] Initializing cgroup subsys net_cls
[    0.008212] Initializing cgroup subsys blkio
[    0.008216] Initializing cgroup subsys perf_event
[    0.008254] mce: CPU supports 4 MCE banks
[    0.008287] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.008287] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.008287] tlb_flushall_shift: -1
[    0.013109] Freeing SMP alternatives memory: 20K (c1607000 - c160c000)
[    0.014266] ACPI: Core revision 20130517
[    0.016672] ACPI: All ACPI Tables successfully acquired
[    0.017163] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.018488] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.058190] smpboot: CPU0: AMD Athlon(tm) XP 2000+ (fam: 06, model: 08, stepping: 01)
[    0.060000] Performance Events: AMD PMU driver.
[    0.060000] ... version:                0
[    0.060000] ... bit width:              48
[    0.060000] ... generic registers:      4
[    0.060000] ... value mask:             0000ffffffffffff
[    0.060000] ... max period:             00007fffffffffff
[    0.060000] ... fixed-purpose events:   0
[    0.060000] ... event mask:             000000000000000f
[    0.060000] Brought up 1 CPUs
[    0.060000] smpboot: Total of 1 processors activated (3330.03 BogoMIPS)
[    0.060000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.060000] devtmpfs: initialized
[    0.060000] PM: Registering ACPI NVS region [mem 0x7fff8000-0x7fffffff] (32768 bytes)
[    0.060000] NET: Registered protocol family 16
[    0.060000] ACPI: bus type PCI registered
[    0.060000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.061934] PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
[    0.061937] PCI: Using configuration type 1 for base access
[    0.063073] bio: create slab <bio-0> at 0
[    0.063240] ACPI: Added _OSI(Module Device)
[    0.063244] ACPI: Added _OSI(Processor Device)
[    0.063247] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.063250] ACPI: Added _OSI(Processor Aggregator Device)
[    0.063935] ACPI: EC: Look up EC in DSDT
[    0.067760] ACPI: Interpreter enabled
[    0.067781] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.067789] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
[    0.067804] ACPI: (supports S0 S1 S4 S5)
[    0.067808] ACPI: Using IOAPIC for interrupt routing
[    0.067861] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.067941] ACPI: No dock devices found.
[    0.068921] ACPI: Power Resource [URP1] (off)
[    0.070068] ACPI: Power Resource [URP2] (off)
[    0.070121] ACPI: Power Resource [FDDP] (off)
[    0.070177] ACPI: Power Resource [LPTP] (off)
[    0.074386] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.074401] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.074405] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.074519] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.074524] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.074528] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.074532] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.074536] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffdfffff] (ignored)
[    0.074540] acpi PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
[    0.074545] PCI: root bus 00: using default resources
[    0.074552] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.074700] PCI host bridge to bus 0000:00
[    0.074708] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.074712] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.074717] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3ffffffff]
[    0.074744] pci 0000:00:00.0: [1106:3189] type 00 class 0x060000
[    0.074761] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref]
[    0.074924] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[    0.074974] pci 0000:00:01.0: supports D1
[    0.075084] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400
[    0.075103] pci 0000:00:0f.0: reg 0x10: [io  0xec00-0xec07]
[    0.075114] pci 0000:00:0f.0: reg 0x14: [io  0xe800-0xe803]
[    0.075125] pci 0000:00:0f.0: reg 0x18: [io  0xe400-0xe407]
[    0.075136] pci 0000:00:0f.0: reg 0x1c: [io  0xe000-0xe003]
[    0.075147] pci 0000:00:0f.0: reg 0x20: [io  0xdc00-0xdc0f]
[    0.075158] pci 0000:00:0f.0: reg 0x24: [io  0xd800-0xd8ff]
[    0.075291] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[    0.075338] pci 0000:00:0f.1: reg 0x20: [io  0xfc00-0xfc0f]
[    0.075487] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.075531] pci 0000:00:10.0: reg 0x20: [io  0xc800-0xc81f]
[    0.075571] pci 0000:00:10.0: supports D1 D2
[    0.075574] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.075629] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.075696] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.075740] pci 0000:00:10.1: reg 0x20: [io  0xcc00-0xcc1f]
[    0.075780] pci 0000:00:10.1: supports D1 D2
[    0.075784] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.075836] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.075905] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.075949] pci 0000:00:10.2: reg 0x20: [io  0xd000-0xd01f]
[    0.075989] pci 0000:00:10.2: supports D1 D2
[    0.075993] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.076060] pci 0000:00:10.2: System wakeup disabled by ACPI
[    0.076130] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[    0.076174] pci 0000:00:10.3: reg 0x20: [io  0xd400-0xd41f]
[    0.076214] pci 0000:00:10.3: supports D1 D2
[    0.076218] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.076271] pci 0000:00:10.3: System wakeup disabled by ACPI
[    0.076340] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    0.076358] pci 0000:00:10.4: reg 0x10: [mem 0xdfffbe00-0xdfffbeff]
[    0.076424] pci 0000:00:10.4: supports D1 D2
[    0.076427] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.076480] pci 0000:00:10.4: System wakeup disabled by ACPI
[    0.076549] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[    0.076609] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.076743] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    0.076762] pci 0000:00:11.5: reg 0x10: [io  0xc400-0xc4ff]
[    0.076832] pci 0000:00:11.5: supports D1 D2
[    0.076884] pci 0000:00:11.5: System wakeup disabled by ACPI
[    0.076955] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[    0.076973] pci 0000:00:12.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.076984] pci 0000:00:12.0: reg 0x14: [mem 0xdfffbd00-0xdfffbdff]
[    0.077046] pci 0000:00:12.0: supports D1 D2
[    0.077050] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.077105] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.077238] pci 0000:01:00.0: [1002:5157] type 00 class 0x030000
[    0.077256] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[    0.077265] pci 0000:01:00.0: reg 0x14: [io  0xa800-0xa8ff]
[    0.077275] pci 0000:01:00.0: reg 0x18: [mem 0xdfef0000-0xdfefffff]
[    0.077300] pci 0000:01:00.0: reg 0x30: [mem 0xdfec0000-0xdfedffff pref]
[    0.077330] pci 0000:01:00.0: supports D1 D2
[    0.077405] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.077412] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.077418] pci 0000:00:01.0:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.077424] pci 0000:00:01.0:   bridge window [mem 0xcfd00000-0xdfcfffff pref]
[    0.077433] pci_bus 0000:00: on NUMA node 0
[    0.078251] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.078342] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.078429] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12 14 15)
[    0.078515] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.078603] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.078689] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.078776] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.078862] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.078984] ACPI: \_SB_.PCI0: notify handler is installed
[    0.079016] Found 1 acpi root devices
[    0.079265] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.079268] vgaarb: loaded
[    0.079271] vgaarb: bridge control possible 0000:01:00.0
[    0.079395] PCI: Using ACPI for IRQ routing
[    0.079402] PCI: pci_cache_line_size set to 32 bytes
[    0.079453] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.079459] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[    0.079750] Switched to clocksource refined-jiffies
[    0.083531] pnp: PnP ACPI init
[    0.083573] ACPI: bus type PNP registered
[    0.083838] pnp 00:00: [dma 2]
[    0.083923] pnp 00:00: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.084305] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.084721] pnp 00:02: [dma 0]
[    0.084850] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.085072] pnp 00:03: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.085316] system 00:04: [io  0x0295-0x0296] has been reserved
[    0.085322] system 00:04: [io  0x03f0-0x03f1] has been reserved
[    0.085327] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.085332] system 00:04: [io  0x0400-0x040f] has been reserved
[    0.085337] system 00:04: [io  0x0800-0x087f] could not be reserved
[    0.085343] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.085348] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.085354] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.085386] pnp 00:05: [dma 4]
[    0.085425] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.085481] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.085532] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.085587] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.085687] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.085766] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.086039] pnp: PnP ACPI: found 11 devices
[    0.086042] ACPI: bus type PNP unregistered
[    0.086048] PnPBIOS: Disabled by ACPI PNP
[    0.123519] Switched to clocksource acpi_pm
[    0.123582] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.123591] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.123599] pci 0000:00:01.0:   bridge window [mem 0xdfe00000-0xdfefffff]
[    0.123605] pci 0000:00:01.0:   bridge window [mem 0xcfd00000-0xdfcfffff pref]
[    0.123624] pci 0000:00:01.0: setting latency timer to 64
[    0.123631] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.123635] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3ffffffff]
[    0.123640] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.123644] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
[    0.123648] pci_bus 0000:01: resource 2 [mem 0xcfd00000-0xdfcfffff pref]
[    0.123728] NET: Registered protocol family 2
[    0.123995] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.123995] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.123995] TCP: Hash tables configured (established 8192 bind 8192)
[    0.123995] TCP: reno registered
[    0.123995] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.123995] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.123995] NET: Registered protocol family 1
[    0.123995] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.123995] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.123995] pci 0000:01:00.0: Boot video device
[    0.123995] PCI: CLS 32 bytes, default 32
[    0.123995] Unpacking initramfs...
[    0.613686] Freeing initrd memory: 12424K (f67ac000 - f73ce000)
[    0.614345] audit: initializing netlink socket (disabled)
[    0.614382] type=2000 audit(1387639785.611:1): initialized
[    0.631712] bounce pool size: 64 pages
[    0.631723] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.632198] VFS: Disk quotas dquot_6.5.2
[    0.632242] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.632420] msgmni has been set to 1732
[    0.632810] alg: No test for stdrng (krng)
[    0.632853] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.632899] io scheduler noop registered
[    0.632902] io scheduler deadline registered
[    0.632911] io scheduler cfq registered (default)
[    0.633086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.633119] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.633326] GHES: HEST is not enabled!
[    0.633344] isapnp: Scanning for PnP cards...
[    0.986739] isapnp: No Plug & Play device found
[    0.986860] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.007176] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.007775] Linux agpgart interface v0.103
[    1.007935] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[    1.013120] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[    1.013302] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.013864] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.013878] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.014100] mousedev: PS/2 mouse device common for all mice
[    1.014177] rtc_cmos 00:06: RTC can wake from S4
[    1.014405] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.014463] rtc_cmos 00:06: alarms up to one year, y3k, 114 bytes nvram
[    1.014481] cpuidle: using governor ladder
[    1.014484] cpuidle: using governor menu
[    1.014638] TCP: cubic registered
[    1.014660] NET: Registered protocol family 10
[    1.015001] mip6: Mobile IPv6
[    1.015007] NET: Registered protocol family 17
[    1.015013] mpls_gso: MPLS GSO support
[    1.015204] Using IPI No-Shortcut mode
[    1.015336] PM: Hibernation image not present or could not be loaded.
[    1.015374] registered taskstats version 1
[    1.016207] rtc_cmos 00:06: setting system clock to 2013-12-21 15:29:46 UTC (1387639786)
[    1.017344] Freeing unused kernel memory: 516K (c1586000 - c1607000)
[    1.017463] Write protecting the kernel text: 4040k
[    1.017511] Write protecting the kernel read-only data: 1252k
[    1.034324] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.048381] systemd-udevd[50]: starting version 204
[    1.111147] SCSI subsystem initialized
[    1.158400] ACPI: bus type USB registered
[    1.158465] usbcore: registered new interface driver usbfs
[    1.158488] usbcore: registered new interface driver hub
[    1.159867] ACPI: bus type ATA registered
[    1.161608] usbcore: registered new device driver usb
[    1.162601] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.163217] uhci_hcd: USB Universal Host Controller Interface driver
[    1.163496] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    1.163511] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    1.163593] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c800
[    1.163679] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.163683] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.163687] usb usb1: Product: UHCI Host Controller
[    1.163690] usb usb1: Manufacturer: Linux 3.11-2-686-pae uhci_hcd
[    1.163694] usb usb1: SerialNumber: 0000:00:10.0
[    1.170033] hub 1-0:1.0: USB hub found
[    1.170051] hub 1-0:1.0: 2 ports detected
[    1.170192] libata version 3.00 loaded.
[    1.181486] sata_via 0000:00:0f.0: version 2.6
[    1.181851] sata_via 0000:00:0f.0: routed to hard irq line 10
[    1.188123] scsi0 : sata_via
[    1.198721] scsi1 : sata_via
[    1.198860] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
[    1.198865] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
[    1.198959] pata_via 0000:00:0f.1: version 0.3.4
[    1.201927] scsi2 : pata_via
[    1.203133] Floppy drive(s): fd0 is 1.44M
[    1.205600] scsi3 : pata_via
[    1.206410] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.206415] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.206655] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    1.206674] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[    1.206714] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000cc00
[    1.206795] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.206800] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.206804] usb usb2: Product: UHCI Host Controller
[    1.206807] usb usb2: Manufacturer: Linux 3.11-2-686-pae uhci_hcd
[    1.206811] usb usb2: SerialNumber: 0000:00:10.1
[    1.207040] hub 2-0:1.0: USB hub found
[    1.207051] hub 2-0:1.0: 2 ports detected
[    1.207347] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    1.207358] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[    1.207386] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000
[    1.207446] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.207451] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.207454] usb usb3: Product: UHCI Host Controller
[    1.207458] usb usb3: Manufacturer: Linux 3.11-2-686-pae uhci_hcd
[    1.207461] usb usb3: SerialNumber: 0000:00:10.2
[    1.207639] hub 3-0:1.0: USB hub found
[    1.207648] hub 3-0:1.0: 2 ports detected
[    1.207875] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    1.207885] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[    1.207912] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d400
[    1.207969] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.207973] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.207977] usb usb4: Product: UHCI Host Controller
[    1.207980] usb usb4: Manufacturer: Linux 3.11-2-686-pae uhci_hcd
[    1.207984] usb usb4: SerialNumber: 0000:00:10.3
[    1.208266] hub 4-0:1.0: USB hub found
[    1.208275] hub 4-0:1.0: 2 ports detected
[    1.224090] FDC 0 is a post-1991 82077
[    1.286955] ehci-pci: EHCI PCI platform driver
[    1.287730] ehci-pci 0000:00:10.4: EHCI Host Controller
[    1.287744] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 5
[    1.287821] ehci-pci 0000:00:10.4: irq 21, io mem 0xdfffbe00
[    1.290076] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    1.296107] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    1.296194] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.296199] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.296203] usb usb5: Product: EHCI Host Controller
[    1.296207] usb usb5: Manufacturer: Linux 3.11-2-686-pae ehci_hcd
[    1.296210] usb usb5: SerialNumber: 0000:00:10.4
[    1.296453] hub 5-0:1.0: USB hub found
[    1.296464] hub 5-0:1.0: 8 ports detected
[    1.320273] hub 1-0:1.0: USB hub found
[    1.320291] hub 1-0:1.0: 2 ports detected
[    1.344221] hub 2-0:1.0: USB hub found
[    1.344238] hub 2-0:1.0: 2 ports detected
[    1.368257] hub 3-0:1.0: USB hub found
[    1.368276] hub 3-0:1.0: 2 ports detected
[    1.392298] hub 4-0:1.0: USB hub found
[    1.392316] hub 4-0:1.0: 2 ports detected
[    1.394207] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1c000, 00:13:8f:10:21:e9, IRQ 23
[    1.395027] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
[    1.400100] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.612027] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.622613] tsc: Refined TSC clocksource calibration: 1665.030 MHz
[    1.924028] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    2.098003] usb 3-1: New USB device found, idVendor=046d, idProduct=c001
[    2.098008] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.098012] usb 3-1: Product: USB Mouse
[    2.098016] usb 3-1: Manufacturer: Logitech
[    2.107071] hidraw: raw HID events driver (C) Jiri Kosina
[    2.123547] usbcore: registered new interface driver usbhid
[    2.123555] usbhid: USB HID core driver
[    2.130315] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:10.2/usb3/3-1/3-1:1.0/input/input1
[    2.130771] hid-generic 0003:046D:C001.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:10.2-1/input0
[    2.620109] Switched to clocksource tsc
[    6.404019] ata3: link is slow to respond, please be patient (ready=0)
[   11.220018] ata3: SRST failed (errno=-16)
[   16.416017] ata3: link is slow to respond, please be patient (ready=0)
[   21.232021] ata3: SRST failed (errno=-16)
[   26.428016] ata3: link is slow to respond, please be patient (ready=0)
[   52.244069] ata3.01: link status unknown, clearing UNKNOWN to NONE
[   52.253469] ata3.00: ATA-5: WDC WD600AB-32BVA0, 21.01H21, max UDMA/100
[   52.253475] ata3.00: 117231408 sectors, multi 16: LBA
[   52.269253] ata3.00: configured for UDMA/100
[   52.269529] scsi 2:0:0:0: Direct-Access     ATA      WDC WD600AB-32BV 21.0 PQ: 0 ANSI: 5
[   52.278580] sd 2:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[   52.278673] sd 2:0:0:0: [sda] Write Protect is off
[   52.278679] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   52.278715] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   52.313424]  sda: sda1 sda2 < sda5 sda6 >
[   52.314576] sd 2:0:0:0: [sda] Attached SCSI disk
[   52.448408] ata4.00: ATAPI: Optiarc DVD RW AD-7190A, 1.01, max UDMA/66
[   52.480234] ata4.00: configured for UDMA/66
[   52.482394] scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-7190A  1.01 PQ: 0 ANSI: 5
[   52.493517] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   52.493647] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[   52.503994] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[   52.504029] cdrom: Uniform CD-ROM driver Revision: 3.20
[   52.505123] sr 3:0:0:0: Attached scsi CD-ROM sr0
[   53.061504] PM: Starting manual resume from disk
[   53.061518] PM: Hibernation image partition 8:5 present
[   53.061520] PM: Looking for hibernation image.
[   53.061926] PM: Image not found (code -22)
[   53.061930] PM: Hibernation image not present or could not be loaded.
[   53.108840] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   55.015341] systemd-udevd[518]: starting version 204
[   55.907703] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   56.012581] gameport gameport0: NS558 PnP Gameport is pnp00:03/gameport0, io 0x200, speed 1011kHz
[   56.018180] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[   56.018197] ACPI: Power Button [PWRB]
[   56.018329] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[   56.018336] ACPI: Sleep Button [SLPB]
[   56.018408] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   56.018412] ACPI: Power Button [PWRF]
[   56.073511] parport_pc 00:02: reported by Plug and Play ACPI
[   56.073644] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   56.231840] [drm] Initialized drm 1.1.0 20060810
[   56.287146] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   56.451135] microcode: AMD CPU family 0x6 not supported
[   56.759415] [drm] radeon kernel modesetting enabled.
[   56.760505] [drm] initializing kernel modesetting (RV200 0x1002:0x5157 0x1002:0x0F2A).
[   56.760542] [drm] register mmio base: 0xDFEF0000
[   56.760545] [drm] register mmio size: 65536
[   56.761373] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   56.761388] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[   56.761396] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[   56.761451] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[   56.761457] radeon 0000:01:00.0: GTT: 64M 0xE0000000 - 0xE3FFFFFF
[   56.761467] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (64M used)
[   56.761486] [drm] Detected VRAM RAM=128M, BAR=128M
[   56.761489] [drm] RAM width 128bits DDR
[   56.761613] [TTM] Zone  kernel: Available graphics memory: 443652 kiB
[   56.761616] [TTM] Zone highmem: Available graphics memory: 1036520 kiB
[   56.761619] [TTM] Initializing pool allocator
[   56.761628] [TTM] Initializing DMA pool allocator
[   56.761679] [drm] radeon: 64M of VRAM memory ready
[   56.761682] [drm] radeon: 64M of GTT memory ready.
[   56.763094] radeon 0000:01:00.0: WB disabled
[   56.763114] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e0000000 and cpu addr 0xf820c000
[   56.763121] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   56.763124] [drm] Driver supports precise vblank timestamp query.
[   56.763188] [drm] radeon: irq initialized.
[   56.763218] [drm] Loading R100 Microcode
[   56.829149] radeon 0000:01:00.0: firmware: agent aborted loading radeon/R100_cp.bin (not found?)
[   56.830145] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[   56.830211] radeon 0000:01:00.0: failed initializing CP (-2).
[   56.830261] radeon 0000:01:00.0: Disabling GPU acceleration
[   56.830312] [drm] radeon: cp finalized
[   56.830416] [drm] radeon: cp finalized
[   56.830439] [TTM] Finalizing pool allocator
[   56.831278] [TTM] Finalizing DMA pool allocator
[   56.832117] [TTM] Zone  kernel: Used memory at exit: 0 kiB
[   56.832127] [TTM] Zone highmem: Used memory at exit: 0 kiB
[   56.832132] [drm] radeon: ttm finalized
[   56.832138] [drm] Forcing AGP to PCI mode
[   56.832987] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (64M used)
[   56.832993] radeon 0000:01:00.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[   56.832999] [drm] Detected VRAM RAM=128M, BAR=128M
[   56.833001] [drm] RAM width 128bits DDR
[   56.840914] [TTM] Zone  kernel: Available graphics memory: 443652 kiB
[   56.840923] [TTM] Zone highmem: Available graphics memory: 1036520 kiB
[   56.840926] [TTM] Initializing pool allocator
[   56.840935] [TTM] Initializing DMA pool allocator
[   56.840985] [drm] radeon: 64M of VRAM memory ready
[   56.840988] [drm] radeon: 512M of GTT memory ready.
[   56.841004] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   56.851263] [drm] PCI GART of 512M enabled (table at 0x0000000037180000).
[   56.851833] radeon 0000:01:00.0: WB disabled
[   56.851845] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xf6d21000
[   56.851851] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   56.851853] [drm] Driver supports precise vblank timestamp query.
[   56.851900] [drm] radeon: irq initialized.
[   56.851905] [drm] Loading R100 Microcode
[   56.853011] radeon 0000:01:00.0: firmware: agent aborted loading radeon/R100_cp.bin (not found?)
[   56.853722] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[   56.853784] radeon 0000:01:00.0: failed initializing CP (-2).
[   56.853834] radeon 0000:01:00.0: Disabling GPU acceleration
[   56.853884] [drm] radeon: cp finalized
[   56.855878] [drm] No TV DAC info found in BIOS
[   56.855984] [drm] Radeon Display Connectors
[   56.855987] [drm] Connector 0:
[   56.855990] [drm]   DVI-I-1
[   56.855992] [drm]   HPD1
[   56.855996] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   56.855998] [drm]   Encoders:
[   56.856000] [drm]     CRT1: INTERNAL_DAC1
[   56.856044] [drm]     DFP1: INTERNAL_TMDS1
[   56.856047] [drm] Connector 1:
[   56.856049] [drm]   SVIDEO-1
[   56.856051] [drm]   Encoders:
[   56.856053] [drm]     TV1: INTERNAL_DAC2
[   56.917058] [drm] fb mappable at 0xD0040000
[   56.917065] [drm] vram apper at 0xD0000000
[   56.917067] [drm] size 5242880
[   56.917069] [drm] fb depth is 24
[   56.917071] [drm]    pitch is 5120
[   56.917392] fbcon: radeondrmfb (fb0) is primary device
[   57.001799] Console: switching to colour frame buffer device 160x64
[   57.032389] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   57.032394] radeon 0000:01:00.0: registered panic notifier
[   57.032967] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
[   57.077729] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[   57.668990] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
[   57.807177] snd_via82xx 0000:00:11.5: setting latency timer to 64
[   60.124620] Adding 2012156k swap on /dev/sda5.  Priority:-1 extents:1 across:2012156k
[   60.173987] EXT4-fs (sda1): re-mounted. Opts: (null)
[   60.647315] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   61.764388] fuse init (API version 7.22)
[   62.068242] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   63.436386] RPC: Registered named UNIX socket transport module.
[   63.436398] RPC: Registered udp transport module.
[   63.436400] RPC: Registered tcp transport module.
[   63.436403] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   63.478975] FS-Cache: Loaded
[   63.507215] FS-Cache: Netfs 'nfs' registered for caching
[   63.597396] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   66.573329] Bluetooth: Core ver 2.16
[   66.573392] NET: Registered protocol family 31
[   66.573396] Bluetooth: HCI device and connection manager initialized
[   66.573875] Bluetooth: HCI socket layer initialized
[   66.573887] Bluetooth: L2CAP socket layer initialized
[   66.573901] Bluetooth: SCO socket layer initialized
[   66.597022] Bluetooth: RFCOMM TTY layer initialized
[   66.597059] Bluetooth: RFCOMM socket layer initialized
[   66.597063] Bluetooth: RFCOMM ver 1.11
[   66.650065] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   66.650077] Bluetooth: BNEP filters: protocol multicast
[   66.650104] Bluetooth: BNEP socket layer initialized
[   66.743028] lp0: using parport0 (interrupt-driven).
[   66.749634] ppdev: user-space parallel port driver
[  118.501466] systemd-logind[2870]: New seat seat0.
[  118.511066] systemd-logind[2870]: Watching system buttons on /dev/input/event4 (Power Button)
[  118.511229] systemd-logind[2870]: Watching system buttons on /dev/input/event2 (Power Button)
[  118.511380] systemd-logind[2870]: Watching system buttons on /dev/input/event3 (Sleep Button)
[  118.513853] systemd-logind[2870]: New session 1 of user ramack.
[  118.514109] systemd-logind[2870]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[ 3904.733541] perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000


output of xvinfo
Code: Select all
$ xvinfo
X-Video Extension version 2.2
screen #0
 no adaptors present
homemade AMD64, Acer AspireOne 150, Asus eeePC 900, i386; Testing
i386,Dell Vostro 1000 AMD64, Dell Inspiron 1100; Sid
XFCE on all.
ramack
 
Posts: 463
Joined: 2008-01-28 15:31
Location: Centennial, CO

Re: [AMD/ATI] RV200 [Radeon 7500/7500 LE] and Jessie

Postby ramack » 2013-12-21 18:49

Part III

I have two drives with Jessie installed. The drive with Jessie I have install with a CD burned on 2013.05.07 (YMD) is the drive I have Zapping working. The most recent install, Zapping or any TV function does not work.

Any help would be appreciated since right now, I'm limited to upgrading beyond the installation from last May.

One thing that I have noticed is that
/etc/modprobe.d/radeon-kms.conf doesn't exist in the newest installation. So I tried adding nomodeset among kernel parameters without effect.

Do I need to install AMD's proprietary driver in order to regain use of the TV function?
homemade AMD64, Acer AspireOne 150, Asus eeePC 900, i386; Testing
i386,Dell Vostro 1000 AMD64, Dell Inspiron 1100; Sid
XFCE on all.
ramack
 
Posts: 463
Joined: 2008-01-28 15:31
Location: Centennial, CO

Re: [AMD/ATI] RV200 [Radeon 7500/7500 LE] and Jessie

Postby smoki » 2013-12-21 19:04

UMS is not supported anymore by the recent DDX drivers, look here it was dropped 1.5 years ago:

http://cgit.freedesktop.org/xorg/driver ... 3e2e634b62

Of course also CONFIG_DRM_RADEON_UMS is disabled in recent Debian kernels ;).
User avatar
smoki
 
Posts: 146
Joined: 2011-08-03 05:04
Location: Srbija, kude snajka posvađa dva sina

Re: [AMD/ATI] RV200 [Radeon 7500/7500 LE] and Jessie

Postby ramack » 2013-12-21 19:12

So do I understand this correctly that this card no longer supported and the TV funtion no longer will work unless I downgrade and install the older working Jessie?
homemade AMD64, Acer AspireOne 150, Asus eeePC 900, i386; Testing
i386,Dell Vostro 1000 AMD64, Dell Inspiron 1100; Sid
XFCE on all.
ramack
 
Posts: 463
Joined: 2008-01-28 15:31
Location: Centennial, CO

Re: [AMD/ATI] RV200 [Radeon 7500/7500 LE] and Jessie

Postby smoki » 2013-12-21 19:25

It is but partly, as you can see tuners are not implemented in KMS so AIW will not work, sorry :wink:

Of course you can downgrade to jessie where it worked or you can use wheezy.

Or you can compile your own kernel with UMS option enabled it is still there even in 3.13 kernel and of course ddx before that change, but all that is not supported anymore so things will break if not now somewhere in future for sure :wink: .
User avatar
smoki
 
Posts: 146
Joined: 2011-08-03 05:04
Location: Srbija, kude snajka posvađa dva sina

Re: [AMD/ATI] RV200 [Radeon 7500/7500 LE] and Jessie

Postby ramack » 2013-12-21 19:53

Ok, thanks.

So since it's being obsoleted on the kernel level, then getting the card to work on another distro is slim to none as well?
homemade AMD64, Acer AspireOne 150, Asus eeePC 900, i386; Testing
i386,Dell Vostro 1000 AMD64, Dell Inspiron 1100; Sid
XFCE on all.
ramack
 
Posts: 463
Joined: 2008-01-28 15:31
Location: Centennial, CO

Re: [AMD/ATI] RV200 [Radeon 7500/7500 LE] and Jessie

Postby smoki » 2013-12-21 20:34

Not exactly true :) if kernel in that XYZ distro has kernel with UMS config enabled + has ddx from this branch or lower:

http://cgit.freedesktop.org/xorg/driver ... log/?h=ums

And XYZ xserver dont complain about all that, then things will work ;).

But of course no modern distros will stay with oldish ddx of that kind, because there are no support for newer/newest cards ;).
User avatar
smoki
 
Posts: 146
Joined: 2011-08-03 05:04
Location: Srbija, kude snajka posvađa dva sina

Re: [AMD/ATI] RV200 [Radeon 7500/7500 LE] and Jessie

Postby ramack » 2014-01-01 21:54

smoki wrote:It is but partly, as you can see tuners are not implemented in KMS so AIW will not work, sorry :wink:

Of course you can downgrade to jessie where it worked or you can use wheezy.


Thanks Smoki,
I would like to be able to keep this box as current as possible while having the TV tuner working. Any problems with downgrading to a working Testing, then hold the kernel and Xorg while letting the rest of the packages upgrade until a dependency issue occurs?
homemade AMD64, Acer AspireOne 150, Asus eeePC 900, i386; Testing
i386,Dell Vostro 1000 AMD64, Dell Inspiron 1100; Sid
XFCE on all.
ramack
 
Posts: 463
Joined: 2008-01-28 15:31
Location: Centennial, CO


Return to Hardware

Who is online

Users browsing this forum: No registered users and 10 guests

fashionable