lm-sensors and asus z170a motherboard

Getting your soundcard to work, using Debian on non-i386 hardware, etc

Re: lm-sensors and asus z170a motherboard

Postby Segfault » 2017-02-24 11:59

Get the latest SystemResqueCD, put it in a USB stick. (I keep one in my pocket at all times, it is handy in many different situations.) Boot the alternative kernel from it - it is the newest kernel. Check out with lsmod what is loaded, use sensors-detect to determine if your sensors are supported.
Segfault
 
Posts: 501
Joined: 2005-09-24 12:24

Re: lm-sensors and asus z170a motherboard

Postby debiman » 2017-02-24 20:24

kernel backporting is definitely the way to go here.
and maybe some other apps too.

i hope you figure it out. backporting a kernel is a fairly common thing and well documented.

aside:
current testing (i can never get the names straight; is it sid?) will become stable pretty soon.
it would be the best choice.
maybe you should just wait a while.
User avatar
debiman
 
Posts: 1545
Joined: 2013-03-12 07:18

Re: lm-sensors and asus z170a motherboard

Postby sunrat » 2017-02-24 21:12

Antonut wrote:Hello,
I'm still waiting for some advise.
*Bump*

What happens when you run this? -
Code: Select all
apt-get install -s -t jessie-backports linux-image-amd64 linux-base

The "-s" is for simulate so it will show what will happen when you run it without actually doing it. If it looks ok, run the same command without the "-s".
“ computer users can be divided into 2 categories:
Those who have lost data
...and those who have not lost data YET ”
Remember to BACKUP!
User avatar
sunrat
 
Posts: 2039
Joined: 2006-08-29 09:12
Location: Melbourne, Australia

Re: lm-sensors and asus z170a motherboard

Postby Antonut » 2017-02-25 08:12

sunrat wrote:
Antonut wrote:Hello,
I'm still waiting for some advise.
*Bump*

What happens when you run this? -
Code: Select all
apt-get install -s -t jessie-backports linux-image-amd64 linux-base

The "-s" is for simulate so it will show what will happen when you run it without actually doing it. If it looks ok, run the same command without the "-s".

Thanks guys,
actually I have been able to install new kernel and linux-base also.
I got some news about lm-sensors after sensors-detect. Here is the new output of sensors
Code: Select all
acpitz-virtual-0
Adapter: Virtual device
temp1:        +27.8°C  (crit = +119.0°C)
temp2:        +29.8°C  (crit = +119.0°C)

nouveau-pci-0100
Adapter: PCI adapter
fan1:        1230 RPM
temp1:        +43.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +50.0°C  (high = +80.0°C, crit = +100.0°C)
Core 0:         +27.0°C  (high = +80.0°C, crit = +100.0°C)
Core 1:         +50.0°C  (high = +80.0°C, crit = +100.0°C)
Core 2:         +26.0°C  (high = +80.0°C, crit = +100.0°C)
Core 3:         +28.0°C  (high = +80.0°C, crit = +100.0°C)

asus-isa-0000
Adapter: ISA adapter
cpu_fan:        0 RPM

of course, as you can see, there still some problems. The output still not showing the values that I need...
Antonut
 
Posts: 10
Joined: 2017-02-09 08:58

Re: lm-sensors and asus z170a motherboard

Postby sunrat » 2017-02-25 12:36

I have a Gigabyte H170 mobo which only shows the same sensors as yours (except nouveau). I doubt you will get any more. At least you have nouveau GPU temp as well with your new kernel.
“ computer users can be divided into 2 categories:
Those who have lost data
...and those who have not lost data YET ”
Remember to BACKUP!
User avatar
sunrat
 
Posts: 2039
Joined: 2006-08-29 09:12
Location: Melbourne, Australia

Re: lm-sensors and asus z170a motherboard

Postby Antonut » 2017-02-25 17:11

sunrat wrote:I have a Gigabyte H170 mobo which only shows the same sensors as yours (except nouveau). I doubt you will get any more.

I'm not sure about it. I think that there are missed voltages and many other informations which usually exist in each mobo, like my old mobo I had (asus p5q3 deluxe). Actually I have two different fans for liquid cooling in cpu fan thread and in cpu opt thread and, of course, they are not at 0 rpm as sensors output says. So, my conclusion is, lm-sensors is still not working properly.
Antonut
 
Posts: 10
Joined: 2017-02-09 08:58

Re: lm-sensors and asus z170a motherboard

Postby debiman » 2017-02-28 06:47

maybe if now you also backport lm-sensors and relevant dependencies?
it just might help.

on a side-note, i personally find temperature to be by far the most important reading.
fan speed is a nice extra, but not really essential.
User avatar
debiman
 
Posts: 1545
Joined: 2013-03-12 07:18

Previous

Return to Hardware

Who is online

Users browsing this forum: arochester and 5 guests

fashionable
cron