How to set up usb external modem with hylafax

Getting your soundcard to work, using Debian on non-i386 hardware, etc

How to set up usb external modem with hylafax

Postby ratrace » 2017-08-23 13:57

Hello,

i'm trying to install hylafax, so that i will be able to send and receive faxes.

I have us robotics external usb fax modem. As it mentions in the setup process https://wiki.debian.org/HylaFax, first i should connect the modem and then start the setup, which i did.

My problem is that in the question "Serial port that modem is connected to [ttyS0]?" i don't know what to answer. From a search that i did, i found that i can see the usb ports in my system by using the command lsusb. The result of the command above shows this,
Bus 002 Device 002: ID 0baf:00ec U.S. Robotics 56K Faxmodem.

What should i answer to the question, about the serial port, to continue the installation?

I'm using debian stretch with gnome.

Thanks
ratrace
 
Posts: 13
Joined: 2015-04-23 07:52
Location: Athens, Greece

Re: How to set up usb external modem with hylafax

Postby Keith_Beef » 2017-08-27 09:40

Maybe these links will help you.

First, a discussion of the difference between USB and ACM
https://rfc1149.net/blog/2013/03/05/wha ... evttyacmx/

Then some discussion about specifically setting up Hylafax
http://www.hylafax.org/archive/2010-12/msg00023.php

It's been a long, long time since I used a fax modem, and that was on a true serial port.
Keith_Beef
 
Posts: 5
Joined: 2017-08-25 06:29
Location: Seine-et-Oise, France


Return to Hardware

Who is online

Users browsing this forum: No registered users and 6 guests

fashionable