My Laptop Suspends Every 30 Seconds After Closing The Lid

Getting your soundcard to work, using Debian on non-i386 hardware, etc

My Laptop Suspends Every 30 Seconds After Closing The Lid

Postby Gunnersky2002 » 2017-09-15 00:35

I installed Debian Stretch 9.0 64 bit with LXDE on my HP Pavilion dv5003cl laptop about a week ago. When I resume after closing the lid, it will suspend again after like 30 seconds. I already looked up the issue and the only answer I got was to disable suspending when the lid is closed. Any possible solutions would be much appreciated.

Thank you.
Gunnersky2002
 
Posts: 2
Joined: 2017-09-14 23:59

Re: My Laptop Suspends Every 30 Seconds After Closing The Li

Postby Daguhh » 2017-09-15 17:01

quite new to linux too, but can you give a bit more info?
some log like :
Code: Select all
dmesg
could help to help

what's your swap size et how much memory do you get?
Code: Select all
free
Daguhh
 
Posts: 8
Joined: 2017-09-04 18:14

Re: My Laptop Suspends Every 30 Seconds After Closing The Li

Postby Gunnersky2002 » 2017-09-18 14:54

Here is the output of dmesg:
Code: Select all
[    0.000000] random: get_random_bytes called from start_kernel+0x3d/0x400 with crng_init=0
[    0.000000] Linux version 4.13.2-gunnersky2002-k8-lowlatency-1 (gunnersky2002@gunnersky2002-Pavilion-dv5000) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #4 PREEMPT Fri Sep 15 11:08:07 CDT 2017
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.2-gunnersky2002-k8-lowlatency-1 root=/dev/mapper/gunnersky2002--vg-root ro resume=/dev/mapper/gunnersky2002--vg-swap quiet splash
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037e9ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000037ea0000-0x0000000037eabfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000037eac000-0x0000000037efffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000037f00000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Hewlett-Packard Pavilion dv5000 (EP416UA#ABA)     /30AE, BIOS F.54 02/08/2007
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x37ea0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-CFFFF uncachable
[    0.000000]   D0000-D5FFF write-back
[    0.000000]   D6000-D6FFF uncachable
[    0.000000]   D7000-DBFFF write-protect
[    0.000000]   DC000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0038000000 mask FFF8000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] found SMP MP-table at [mem 0x000f7c70-0x000f7c7f] mapped at [ffff8e8cc00f7c70]
[    0.000000] Base memory trampoline at [ffff8e8cc0099000] 99000 size 24576
[    0.000000] BRK [0x10aa1000, 0x10aa1fff] PGTABLE
[    0.000000] BRK [0x10aa2000, 0x10aa2fff] PGTABLE
[    0.000000] BRK [0x10aa3000, 0x10aa3fff] PGTABLE
[    0.000000] BRK [0x10aa4000, 0x10aa4fff] PGTABLE
[    0.000000] BRK [0x10aa5000, 0x10aa5fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35835000-0x36c11fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7C40 000014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 0x0000000037EA3ED4 000034 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 0x0000000037EABE3B 000074 (v01 HP     Piranha  06040000 ATI  000F4240)
[    0.000000] ACPI: DSDT 0x0000000037EA3F08 007F33 (v01 HP     309B     06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 0x0000000037EACFC0 000040
[    0.000000] ACPI: SSDT 0x0000000037EABEAF 0000CF (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
[    0.000000] ACPI: APIC 0x0000000037EABF7E 000046 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: MCFG 0x0000000037EABFC4 00003C (v01 HP     PORSCHE  06040000 LOHR 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x0000000037e9ffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000037e9ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000037e9ffff]
[    0.000000] On node 0 totalpages: 228926
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3515 pages used for memmap
[    0.000000]   DMA32 zone: 224928 pages, LIFO batch:31
[    0.000000] SB4X0 revision 0x81
[    0.000000] Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 225326
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.2-gunnersky2002-k8-lowlatency-1 root=/dev/mapper/gunnersky2002--vg-root ro resume=/dev/mapper/gunnersky2002--vg-swap quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Memory: 864288K/915704K available (6267K kernel code, 1041K rwdata, 2664K rodata, 1036K init, 552K bss, 51416K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 25851 entries in 101 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    Tasks RCU enabled.
[    0.000000] NR_IRQS: 4352, nr_irqs: 256, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.001000] tsc: Fast TSC calibration using PIT
[    0.002000] tsc: Detected 1790.755 MHz processor
[    0.002000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3581.51 BogoMIPS (lpj=1790755)
[    0.002000] pid_max: default: 32768 minimum: 301
[    0.002000] ACPI: Core revision 20170531
[    0.006562] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.006618] Security Framework initialized
[    0.006620] Yama: becoming mindful.
[    0.006630] AppArmor: AppArmor disabled by boot time parameter
[    0.006670] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.006688] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.007020] mce: CPU supports 5 MCE banks
[    0.007033] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.007034] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.007034] CPU: AMD Turion(tm) 64 Mobile Technology ML-32 (family: 0xf, model: 0x24, stepping: 0x2)
[    0.008232] Performance Events: AMD PMU driver.
[    0.008241] ... version:                0
[    0.008242] ... bit width:              48
[    0.008242] ... generic registers:      4
[    0.008243] ... value mask:             0000ffffffffffff
[    0.008244] ... max period:             00007fffffffffff
[    0.008245] ... fixed-purpose events:   0
[    0.008246] ... event mask:             000000000000000f
[    0.008339] Hierarchical SRCU implementation.
[    0.009793] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.013028] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.020000] devtmpfs: initialized
[    0.020000] x86/mm: Memory block size: 128MB
[    0.020000] PM: Registering ACPI NVS region [mem 0x37eac000-0x37efffff] (344064 bytes)
[    0.020000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.020000] futex hash table entries: 256 (order: 0, 6144 bytes)
[    0.020000] pinctrl core: initialized pinctrl subsystem
[    0.020000] NET: Registered protocol family 16
[    0.020097] cpuidle: using governor ladder
[    0.020102] cpuidle: using governor menu
[    0.020105] PCCT header not found.
[    0.020111] node 0 link 0: io port [1000, fffff]
[    0.020113] TOM: 0000000040000000 aka 1024M
[    0.020117] node 0 link 0: mmio [d0000000, dfffffff]
[    0.020120] node 0 link 0: mmio [c8000000, cfffffff]
[    0.020122] node 0 link 0: mmio [a0000, bffff]
[    0.020124] node 0 link 0: mmio [f0000000, ffffffff]
[    0.020126] node 0 link 0: mmio [e0000000, efffffff]
[    0.020128] node 0 link 0: mmio [40000000, c7ffffff]
[    0.020131] bus: [bus 00-ff] on node 0 link 0
[    0.020133] bus: 00 [io  0x0000-0xffff]
[    0.020134] bus: 00 [mem 0x40000000-0xefffffff]
[    0.020135] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.020136] bus: 00 [mem 0xf0000000-0xfcffffffff]
[    0.020181] ACPI: bus type PCI registered
[    0.020183] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.020240] PCI: Using configuration type 1 for base access
[    0.021475] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.021786] ACPI: Added _OSI(Module Device)
[    0.021787] ACPI: Added _OSI(Processor Device)
[    0.021789] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.021790] ACPI: Added _OSI(Processor Aggregator Device)
[    0.024019] ACPI: EC: EC started
[    0.024020] ACPI: EC: interrupt blocked
[    0.024134] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[    0.024137] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x1a, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.024139] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
[    0.024140] ACPI: Interpreter enabled
[    0.024167] ACPI: (supports S0 S3 S4 S5)
[    0.024169] ACPI: Using IOAPIC for interrupt routing
[    0.024266] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.110507] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.110517] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.110525] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.111349] PCI host bridge to bus 0000:00
[    0.111353] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.111355] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff window]
[    0.111357] pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff window]
[    0.111360] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff window]
[    0.111362] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.111364] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.111366] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.111376] pci 0000:00:00.0: [1002:5950] type 00 class 0x060000
[    0.111485] pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400
[    0.111589] pci 0000:00:05.0: [1002:5a37] type 01 class 0x060400
[    0.111629] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.111740] pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310
[    0.111769] pci 0000:00:13.0: reg 0x10: [mem 0xc0000000-0xc0000fff]
[    0.111946] pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310
[    0.111975] pci 0000:00:13.1: reg 0x10: [mem 0xc0001000-0xc0001fff]
[    0.112154] pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320
[    0.112184] pci 0000:00:13.2: reg 0x10: [mem 0xc0002000-0xc0002fff]
[    0.112299] pci 0000:00:13.2: supports D1 D2
[    0.112301] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.112394] pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500
[    0.112420] pci 0000:00:14.0: reg 0x10: [io  0x8400-0x840f]
[    0.112433] pci 0000:00:14.0: reg 0x14: [mem 0xc0003000-0xc00033ff]
[    0.112493] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.112600] pci 0000:00:14.1: [1002:4376] type 00 class 0x01018a
[    0.112628] pci 0000:00:14.1: reg 0x10: [io  0x8430-0x8437]
[    0.112641] pci 0000:00:14.1: reg 0x14: [io  0x8424-0x8427]
[    0.112654] pci 0000:00:14.1: reg 0x18: [io  0x8428-0x842f]
[    0.112666] pci 0000:00:14.1: reg 0x1c: [io  0x8420-0x8423]
[    0.112679] pci 0000:00:14.1: reg 0x20: [io  0x8410-0x841f]
[    0.112707] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.112709] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.112711] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.112712] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.112829] pci 0000:00:14.3: [1002:4377] type 00 class 0x060100
[    0.113006] pci 0000:00:14.4: [1002:4371] type 01 class 0x060401
[    0.113139] pci 0000:00:14.5: [1002:4370] type 00 class 0x040100
[    0.113167] pci 0000:00:14.5: reg 0x10: [mem 0xc0003400-0xc00034ff]
[    0.113340] pci 0000:00:14.6: [1002:4378] type 00 class 0x070300
[    0.113367] pci 0000:00:14.6: reg 0x10: [mem 0xc0003800-0xc00038ff]
[    0.113540] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.113617] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.113693] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.113767] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.113903] pci 0000:01:05.0: [1002:5955] type 00 class 0x030000
[    0.113913] pci 0000:01:05.0: reg 0x10: [mem 0xc8000000-0xcfffffff pref]
[    0.113919] pci 0000:01:05.0: reg 0x14: [io  0x9000-0x90ff]
[    0.113924] pci 0000:01:05.0: reg 0x18: [mem 0xc0100000-0xc010ffff]
[    0.113938] pci 0000:01:05.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.113955] pci 0000:01:05.0: supports D1 D2
[    0.114021] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.114025] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.114029] pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
[    0.114032] pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
[    0.114114] acpiphp: Slot [1] registered
[    0.114119] pci 0000:00:05.0: PCI bridge to [bus 02-03]
[    0.114123] pci 0000:00:05.0:   bridge window [io  0x0000-0x0fff]
[    0.114126] pci 0000:00:05.0:   bridge window [mem 0x00000000-0x000fffff]
[    0.114188] pci 0000:06:02.0: [14e4:4318] type 00 class 0x028000
[    0.114219] pci 0000:06:02.0: reg 0x10: [mem 0xc0200000-0xc0201fff]
[    0.114390] pci 0000:06:06.0: [10ec:8139] type 00 class 0x020000
[    0.114424] pci 0000:06:06.0: reg 0x10: [io  0xa000-0xa0ff]
[    0.114439] pci 0000:06:06.0: reg 0x14: [mem 0xc0202000-0xc02020ff]
[    0.114556] pci 0000:06:06.0: supports D1 D2
[    0.114558] pci 0000:06:06.0: PME# supported from D1 D2 D3hot D3cold
[    0.114681] pci 0000:00:14.4: PCI bridge to [bus 06-07] (subtractive decode)
[    0.114689] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    0.114695] pci 0000:00:14.4:   bridge window [mem 0xc0200000-0xc02fffff]
[    0.114700] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.114703] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000ddfff window] (subtractive decode)
[    0.114705] pci 0000:00:14.4:   bridge window [mem 0x000de000-0x000dffff window] (subtractive decode)
[    0.114707] pci 0000:00:14.4:   bridge window [mem 0x40000000-0xffffffff window] (subtractive decode)
[    0.114709] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.114711] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.114726] pci_bus 0000:00: on NUMA node 0
[    0.114923] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[    0.114995] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[    0.115071] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[    0.115142] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[    0.115213] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[    0.115283] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[    0.115353] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.115423] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[    0.144183] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.144275] ACPI: EC: interrupt unblocked
[    0.144284] ACPI: EC: event unblocked
[    0.144293] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x1a, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.144295] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.144455] pci 0000:01:05.0: vgaarb: setting as boot VGA device
[    0.144458] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.144461] pci 0000:01:05.0: vgaarb: bridge control possible
[    0.144461] vgaarb: loaded
[    0.144558] EDAC MC: Ver: 3.0.0
[    0.144784] PCI: Using ACPI for IRQ routing
[    0.144787] PCI: pci_cache_line_size set to 64 bytes
[    0.144860] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.144862] e820: reserve RAM buffer [mem 0x37ea0000-0x37ffffff]
[    0.145110] clocksource: Switched to clocksource refined-jiffies
[    0.164711] VFS: Disk quotas dquot_6.6.0
[    0.164769] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.164944] pnp: PnP ACPI init
[    0.165213] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.165217] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.165219] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.165225] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165546] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.165591] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.165633] pnp 00:03: Plug and Play ACPI device, IDs SYN0120 SYN0100 SYN0002 PNP0f13 (active)
[    0.165705] system 00:04: [io  0x1080] has been reserved
[    0.165709] system 00:04: [io  0x040b] has been reserved
[    0.165711] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.165713] system 00:04: [io  0x04d6] has been reserved
[    0.165716] system 00:04: [io  0x0870-0x087f] has been reserved
[    0.165718] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.165720] system 00:04: [io  0x0c14] has been reserved
[    0.165722] system 00:04: [io  0x0c50-0x0c52] has been reserved
[    0.165724] system 00:04: [io  0x0c6c] has been reserved
[    0.165726] system 00:04: [io  0x0c6f] has been reserved
[    0.165729] system 00:04: [io  0x0cd4-0x0cd5] has been reserved
[    0.165731] system 00:04: [io  0x0cd6-0x0cd7] has been reserved
[    0.165733] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.165735] system 00:04: [io  0x8000-0x805f] has been reserved
[    0.165738] system 00:04: [io  0x8100-0x81ff window] has been reserved
[    0.165740] system 00:04: [io  0x0f40-0x0f47] has been reserved
[    0.165743] system 00:04: [io  0x0280-0x0293] has been reserved
[    0.165746] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165827] pnp 00:05: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.165856] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.165859] system 00:05: [mem 0xfff80000-0xffffffff] has been reserved
[    0.165863] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.189027] pnp: PnP ACPI: found 6 devices
[    0.195754] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.195762] clocksource: Switched to clocksource acpi_pm
[    0.195824] pci 0000:01:05.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
[    0.195828] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.195831] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.195834] pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
[    0.195837] pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
[    0.195841] pci 0000:00:05.0: PCI bridge to [bus 02-03]
[    0.195848] pci 0000:00:14.4: PCI bridge to [bus 06-07]
[    0.195851] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    0.195858] pci 0000:00:14.4:   bridge window [mem 0xc0200000-0xc02fffff]
[    0.195872] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window]
[    0.195874] pci_bus 0000:00: resource 5 [mem 0x000dc000-0x000ddfff window]
[    0.195876] pci_bus 0000:00: resource 6 [mem 0x000de000-0x000dffff window]
[    0.195878] pci_bus 0000:00: resource 7 [mem 0x40000000-0xffffffff window]
[    0.195880] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7 window]
[    0.195882] pci_bus 0000:00: resource 9 [io  0x0d00-0xffff window]
[    0.195884] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.195886] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
[    0.195888] pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref]
[    0.195891] pci_bus 0000:06: resource 0 [io  0xa000-0xafff]
[    0.195893] pci_bus 0000:06: resource 1 [mem 0xc0200000-0xc02fffff]
[    0.195895] pci_bus 0000:06: resource 4 [mem 0x000a0000-0x000bffff window]
[    0.195897] pci_bus 0000:06: resource 5 [mem 0x000dc000-0x000ddfff window]
[    0.195899] pci_bus 0000:06: resource 6 [mem 0x000de000-0x000dffff window]
[    0.195901] pci_bus 0000:06: resource 7 [mem 0x40000000-0xffffffff window]
[    0.195902] pci_bus 0000:06: resource 8 [io  0x0000-0x0cf7 window]
[    0.195904] pci_bus 0000:06: resource 9 [io  0x0d00-0xffff window]
[    0.195904] NET: Registered protocol family 2
[    0.195904] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.195904] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.195904] TCP: Hash tables configured (established 8192 bind 8192)
[    0.195904] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.195904] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.195934] NET: Registered protocol family 1
[    0.195952] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.195960] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    0.300237] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.300249] PCI: CLS 32 bytes, default 64
[    0.300349] Trying to unpack rootfs image as initramfs...
[    0.862503] Freeing initrd memory: 20340K
[    0.863085] audit: initializing netlink subsys (disabled)
[    0.863479] Initialise system trusted keyrings
[    0.863516] audit: type=2000 audit(1505746286.863:1): state=initialized audit_enabled=0 res=1
[    0.863538] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.865526] zbud: loaded
[    1.500369] Key type asymmetric registered
[    1.500372] Asymmetric key parser 'x509' registered
[    1.500443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.500490] io scheduler noop registered
[    1.500491] io scheduler deadline registered
[    1.500535] io scheduler cfq registered (default)
[    1.500537] io scheduler mq-deadline registered
[    1.500538] io scheduler kyber registered
[    1.500771] tsc: Marking TSC unstable due to TSC halts in idle
[    1.500922] GHES: HEST is not enabled!
[    1.501066] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.501832] Linux agpgart interface v0.103
[    1.505406] brd: module loaded
[    1.505928] Floppy drive(s): fd0 is 1.44M
[    1.509836] loop: module loaded
[    1.509931] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.528553] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.528602] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.528734] mousedev: PS/2 mouse device common for all mice
[    1.530143] rtc_cmos 00:01: RTC can wake from S4
[    1.530304] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.530332] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
[    1.530348] ledtrig-cpu: registered to indicate activity on CPUs
[    1.530958] NET: Registered protocol family 10
[    1.531333] Segment Routing with IPv6
[    1.531356] mip6: Mobile IPv6
[    1.531358] NET: Registered protocol family 17
[    1.531364] NET: Registered protocol family 15
[    1.531366] mpls_gso: MPLS GSO support
[    1.531499] microcode: AMD CPU family 0xf not supported
[    1.531695] registered taskstats version 1
[    1.531697] Loading compiled-in X.509 certificates
[    1.536248] Loaded X.509 cert 'Build time autogenerated kernel key: cd3c2c7f2ad05a1f54888453ed02c3be926fa1ad'
[    1.536296] zswap: loaded using pool lzo/zbud
[    1.536356] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.536690] rtc_cmos 00:01: setting system clock to 2017-09-18 14:51:28 UTC (1505746288)
[    1.536743] PM: Checking hibernation image partition /dev/mapper/gunnersky2002--vg-swap
[    1.547373] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.888041] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19d00c20949, max_idle_ns: 440795244989 ns
[    4.576057] floppy0: no floppy controllers found
[    4.576072] work still pending
[    4.576154] PM: Hibernation image not present or could not be loaded.
[    4.579377] Freeing unused kernel memory: 1036K
[    4.579382] Write protecting the kernel read-only data: 12288k
[    4.582135] Freeing unused kernel memory: 1912K
[    4.589034] Freeing unused kernel memory: 1432K
[    4.592236] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.901219] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
[    4.916498] ACPI: Invalid active0 threshold
[    4.918483] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.920076] thermal LNXTHERM:00: registered as thermal_zone0
[    4.920081] ACPI: Thermal Zone [THRM] (0 C)
[    4.951723] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    4.951731] 8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    4.955547] ACPI: bus type USB registered
[    4.955585] usbcore: registered new interface driver usbfs
[    4.955600] usbcore: registered new interface driver hub
[    4.956083] usbcore: registered new device driver usb
[    4.974725] 8139too: 8139too Fast Ethernet driver 0.9.28
[    4.975807] 8139too 0000:06:06.0 eth0: RealTek RTL8139 at 0xffffaf1580011000, 00:0f:b0:c1:b8:cd, IRQ 22
[    4.986340] SCSI subsystem initialized
[    4.987238] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.005110] ehci-pci: EHCI PCI platform driver
[    5.005328] ehci-pci 0000:00:13.2: EHCI Host Controller
[    5.005340] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
[    5.005409] ehci-pci 0000:00:13.2: irq 19, io mem 0xc0002000
[    5.007960] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.012638] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    5.012717] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.012719] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.012721] usb usb1: Product: EHCI Host Controller
[    5.012723] usb usb1: Manufacturer: Linux 4.13.2-gunnersky2002-k8-lowlatency-1 ehci_hcd
[    5.012724] usb usb1: SerialNumber: 0000:00:13.2
[    5.012926] hub 1-0:1.0: USB hub found
[    5.017402] hub 1-0:1.0: 8 ports detected
[    5.030375] ohci-pci: OHCI PCI platform driver
[    5.030549] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    5.030561] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[    5.030604] ohci-pci 0000:00:13.0: irq 19, io mem 0xc0000000
[    5.063066] libata version 3.00 loaded.
[    5.088087] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.088091] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.088093] usb usb2: Product: OHCI PCI host controller
[    5.088095] usb usb2: Manufacturer: Linux 4.13.2-gunnersky2002-k8-lowlatency-1 ohci_hcd
[    5.088097] usb usb2: SerialNumber: 0000:00:13.0
[    5.088962] hub 2-0:1.0: USB hub found
[    5.089045] hub 2-0:1.0: 4 ports detected
[    5.099052] scsi host0: pata_atiixp
[    5.104811] scsi host1: pata_atiixp
[    5.104903] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[    5.104905] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[    5.105891] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    5.105903] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[    5.105953] ohci-pci 0000:00:13.1: irq 19, io mem 0xc0001000
[    5.116639] 8139too 0000:06:06.0 enp6s6: renamed from eth0
[    5.164136] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.164142] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.164144] usb usb3: Product: OHCI PCI host controller
[    5.164146] usb usb3: Manufacturer: Linux 4.13.2-gunnersky2002-k8-lowlatency-1 ohci_hcd
[    5.164147] usb usb3: SerialNumber: 0000:00:13.1
[    5.164775] hub 3-0:1.0: USB hub found
[    5.164792] hub 3-0:1.0: 4 ports detected
[    5.178436] [drm] radeon kernel modesetting enabled.
[    5.179259] [drm] initializing kernel modesetting (RS480 0x1002:0x5955 0x103C:0x30AE 0x00).
[    5.179416] [drm] Generation 2 PCI interface, using max accessible memory
[    5.179425] radeon 0000:01:05.0: VRAM: 128M 0x0000000038000000 - 0x000000003FFFFFFF (128M used)
[    5.179427] radeon 0000:01:05.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    5.179437] [drm] Detected VRAM RAM=128M, BAR=128M
[    5.179438] [drm] RAM width 128bits DDR
[    5.179538] [TTM] Zone  kernel: Available graphics memory: 444504 kiB
[    5.179539] [TTM] Initializing pool allocator
[    5.179547] [TTM] Initializing DMA pool allocator
[    5.179591] [drm] radeon: 128M of VRAM memory ready
[    5.179592] [drm] radeon: 512M of GTT memory ready.
[    5.179615] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.184211] [drm] radeon: power management initialized
[    5.184227] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    5.184233] [drm] PCIE GART of 512M enabled (table at 0x0000000036480000).
[    5.184272] radeon 0000:01:05.0: WB enabled
[    5.184277] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000040000000 and cpu addr 0xffff8e8cf647c000
[    5.184280] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.184281] [drm] Driver supports precise vblank timestamp query.
[    5.184283] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[    5.184299] [drm] radeon: irq initialized.
[    5.184307] [drm] Loading R300 Microcode
[    5.184488] [drm] radeon: ring at 0x0000000040001000
[    5.184511] [drm] ring test succeeded in 2 usecs
[    5.184659] [drm] ib test succeeded in 0 usecs
[    5.185550] [drm] Panel ID String: QDS                     
[    5.185552] [drm] Panel Size 1280x800
[    5.186086] [drm] Radeon Display Connectors
[    5.186088] [drm] Connector 0:
[    5.186088] [drm]   VGA-1
[    5.186090] [drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[    5.186091] [drm]   Encoders:
[    5.186091] [drm]     CRT1: INTERNAL_DAC2
[    5.186092] [drm] Connector 1:
[    5.186093] [drm]   LVDS-1
[    5.186095] [drm]   DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[    5.186095] [drm]   Encoders:
[    5.186096] [drm]     LCD1: INTERNAL_LVDS
[    5.186096] [drm] Connector 2:
[    5.186097] [drm]   SVIDEO-1
[    5.186098] [drm]   Encoders:
[    5.186098] [drm]     TV1: INTERNAL_DAC2
[    5.252981] [drm] fb mappable at 0xC8040000
[    5.252982] [drm] vram apper at 0xC8000000
[    5.252983] [drm] size 4096000
[    5.252983] [drm] fb depth is 24
[    5.252984] [drm]    pitch is 5120
[    5.253173] fbcon: radeondrmfb (fb0) is primary device
[    5.267295] ata1.00: ATA-6: TOSHIBA MK8025GAS, KA024A, max UDMA/100
[    5.267298] ata1.00: 156301488 sectors, multi 16: LBA
[    5.270260] ata1.00: configured for UDMA/100
[    5.270441] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK8025GA 4A   PQ: 0 ANSI: 5
[    5.283577] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4082N, CQ04, max MWDMA2
[    5.296804] Console: switching to colour frame buffer device 160x50
[    5.305512] ata2.00: configured for MWDMA2
[    5.307268] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[    5.310068] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on minor 0
[    5.311411] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4082N CQ04 PQ: 0 ANSI: 5
[    5.338205] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    5.338226] sd 0:0:0:0: [sda] Write Protect is off
[    5.338229] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.338257] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.358356] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.358360] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.359213] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.379854]  sda: sda1 sda2 sda3 < sda5 > sda4
[    5.380537] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.864872] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0/0x0, board id: 0, fw id: 152129
[    5.929293] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    6.300734] random: crng init done
[    7.082253] device-mapper: uevent: version 1.0.3
[    7.084312] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
[   24.455624] NET: Registered protocol family 38
[   26.204026] raid6: sse2x1   gen()   292 MB/s
[   26.224103] raid6: sse2x1   xor()  2031 MB/s
[   26.241114] raid6: sse2x2   gen()   562 MB/s
[   26.271014] raid6: sse2x2   xor()  2291 MB/s
[   26.305013] raid6: sse2x4   gen()   914 MB/s
[   26.339013] raid6: sse2x4   xor()  1285 MB/s
[   26.339017] raid6: using algorithm sse2x4 gen() 914 MB/s
[   26.339017] raid6: .... xor() 1285 MB/s, rmw enabled
[   26.339019] raid6: using intx1 recovery algorithm
[   26.348348] xor: measuring software checksum speed
[   26.367023]    prefetch64-sse:  5264.000 MB/sec
[   26.385017]    generic_sse:  5284.000 MB/sec
[   26.385019] xor: using function: generic_sse (5284.000 MB/sec)
[   26.458159] Btrfs loaded, crc32c=crc32c-generic
[   27.121694] BTRFS: device fsid 838b7d61-d194-438d-b646-a4cd83534394 devid 1 transid 22036 /dev/mapper/gunnersky2002--vg-root
[   27.166557] PM: Starting manual resume from disk
[   27.166567] PM: Hibernation image partition 254:1 present
[   27.166568] PM: Looking for hibernation image.
[   27.168038] PM: Image not found (code -22)
[   27.168041] PM: Hibernation image not present or could not be loaded.
[   27.206936] BTRFS info (device dm-2): disk space caching is enabled
[   27.206940] BTRFS info (device dm-2): has skinny extents
[   29.540535] ip_tables: (C) 2000-2006 Netfilter Core Team
[   29.586436] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   29.586630] systemd[1]: Detected architecture x86-64.
[   29.617961] systemd[1]: Set hostname to <gunnersky2002-Pavilion-dv5000>.
[   31.300719] systemd[1]: connman-wait-online.service: Cannot add dependency job, ignoring: Unit connman-wait-online.service is masked.
[   31.300744] systemd[1]: connman.service: Cannot add dependency job, ignoring: Unit connman.service is masked.
[   31.300774] systemd[1]: ofono.service: Cannot add dependency job, ignoring: Unit ofono.service is masked.
[   31.300842] systemd[1]: dundee.service: Cannot add dependency job, ignoring: Unit dundee.service is masked.
[   31.302421] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   31.302626] systemd[1]: Listening on LVM2 poll daemon socket.
[   31.302684] systemd[1]: Listening on fsck to fsckd communication Socket.
[   32.061297] BTRFS info (device dm-2): disk space caching is enabled
[   32.350840] lp: driver loaded but no devices found
[   32.420532] ppdev: user-space parallel port driver
[   32.528679] systemd-journald[276]: Received request to flush runtime journal from PID 1
[   35.003152] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[   35.004287] ACPI: Lid Switch [LID]
[   35.004408] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[   35.004428] ACPI: Power Button [PWRB]
[   35.004519] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   35.004540] ACPI: Power Button [PWRF]
[   35.004605] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input6
[   35.004617] ACPI: Sleep Button [SLPF]
[   35.068052] ACPI: AC Adapter [ACAD] (off-line)
[   35.124625] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   35.195629] ACPI: Battery Slot [BAT1] (battery present)
[   35.202195] acpi device:11: registered as cooling_device1
[   35.202309] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0f/LNXVIDEO:00/input/input7
[   35.215903] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   35.366761] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   35.367544] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   35.623208] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   35.958068] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02
[   35.958082] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[   35.958090] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[   35.958099] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[   35.958107] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[   35.990571] ssb: Sonics Silicon Backplane found on PCI device 0000:06:02.0
[   36.130115] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   36.398103] snd_atiixp_modem 0000:00:14.6: MC'97 0 converters and GPIO not ready (0x1)
[   36.434119] powernow_k8: fid 0xa (1800 MHz), vid 0x4
[   36.434123] powernow_k8: fid 0x8 (1600 MHz), vid 0x6
[   36.434124] powernow_k8: fid 0x0 (800 MHz), vid 0x16
[   36.434301] powernow_k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-32 (1 cpu cores) (version 2.20.00)
[   38.972827] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8e8cf42b77e0 (20170531/exresop-593)
[   38.972844] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461)
[   38.972851] ACPI Error: Method parse/execution failed \_SB.WMID.Z00A, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[   38.972866] ACPI Error: Method parse/execution failed \_SB.WMID.WMAD, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[   38.976250] input: HP WMI hotkeys as /devices/virtual/input/input9
[   39.341277] Adding 1748988k swap on /dev/mapper/gunnersky2002--vg-swap.  Priority:-1 extents:1 across:1748988k FS
[   40.415832] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   40.439039] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
[   40.439063] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 8, Version 0
[   40.450401] Broadcom 43xx driver loaded [ Features: PNLS ]
[   41.361807] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   42.019861] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   46.148657] 8139too 0000:06:06.0 enp6s6: link down
[   46.148756] IPv6: ADDRCONF(NETDEV_UP): enp6s6: link is not ready
[   46.476208] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=600
[   50.424444] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=600
[   54.372714] NET: Registered protocol family 4
[   54.660331] NET: Registered protocol family 3
[   54.762336] NET: Registered protocol family 5
[   55.190325] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   55.284966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   60.875132] fuse init (API version 7.26)
[   61.852074] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   61.922227] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   62.396137] 8139too 0000:06:06.0 enp6s6: link down
[   62.396283] IPv6: ADDRCONF(NETDEV_UP): enp6s6: link is not ready
[   62.876068] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   62.952252] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   66.674618] wlan0: authenticate with 98:fc:11:64:30:b8
[   66.694300] wlan0: send auth to 98:fc:11:64:30:b8 (try 1/3)
[   66.696471] wlan0: authenticated
[   66.697272] wlan0: associate with 98:fc:11:64:30:b8 (try 1/3)
[   66.700071] wlan0: RX AssocResp from 98:fc:11:64:30:b8 (capab=0x411 status=0 aid=3)
[   66.700544] wlan0: associated
[   66.700584] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1339.262426] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 1339.949915] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0


Here is the output of free:
Code: Select all
              total        used        free      shared  buff/cache   available
Mem:         889008      463668      202152       33700      223188      277836
Swap:       1748988      141312     1607676


If it helps, my system is on an encrypted LVM partition and my root filesystem is Btrfs. I have 868MB of RAM and 1707MB of swap.
Gunnersky2002
 
Posts: 2
Joined: 2017-09-14 23:59


Return to Hardware

Who is online

Users browsing this forum: No registered users and 4 guests

fashionable
cron