Slow Atheros wifi card

Getting your soundcard to work, using Debian on non-i386 hardware, etc

Slow Atheros wifi card

Postby Frzs » 2017-10-29 15:54

Hi!

Today I installed Debian 9 LXDE. One of my laptops (Win 10) has 36Mbit/44Mbit, and this one with the problem 10,5Mbit/13,5Mbit.
Code: Select all
lspci
01:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)

Code: Select all
dmesg
[    0.000000] Linux version 4.9.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.51-1 (2017-09-28)
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f4d1fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f4d2000-0x000000007f4dcfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f4dd000-0x000000007f533fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f534000-0x000000007f536fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f537000-0x000000007f5bafff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f5bb000-0x000000007f5befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f5bf000-0x000000007f679fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f67a000-0x000000007f6befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f6bf000-0x000000007f6fffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP G7000 Notebook PC/30D9, BIOS F.31 02/29/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f67a max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFFE0000 mask FFFFE0000 write-protect
[    0.000000]   1 base 000000000 mask FC0000000 write-back
[    0.000000]   2 base 040000000 mask FC0000000 write-back
[    0.000000]   3 base 07F800000 mask FFF800000 uncachable
[    0.000000]   4 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] found SMP MP-table at [mem 0x000fe270-0x000fe27f] mapped at [c00fe270]
[    0.000000] initial memory mapped: [mem 0x00000000-0x0edfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x0e9af000, 0x0e9affff] PGTABLE
[    0.000000] BRK [0x0e9b0000, 0x0e9b1fff] PGTABLE
[    0.000000] BRK [0x0e9b2000, 0x0e9b2fff] PGTABLE
[    0.000000] BRK [0x0e9b3000, 0x0e9b3fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35ec1000-0x36f57fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HP    )
[    0.000000] ACPI: XSDT 0x000000007F6FE120 00006C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000007F6FD000 0000F4 (v04 HP     SPARTAN  00000001 LOHR 00000000)
[    0.000000] ACPI: DSDT 0x000000007F6F4000 00802F (v01 HP     SPARTAN  00000001 LOHR 00000000)
[    0.000000] ACPI: FACS 0x000000007F67D000 000040
[    0.000000] ACPI: FACS 0x000000007F67D000 000040
[    0.000000] ACPI: APIC 0x000000007F6F3000 000068 (v02 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: HPET 0x000000007F6F2000 000038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: MCFG 0x000000007F6F1000 00003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: ASF! 0x000000007F6F0000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: SLIC 0x000000007F6EF000 000176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: BOOT 0x000000007F6EE000 000028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: SSDT 0x000000007F6ED000 0005D7 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.000000] ACPI: SSDT 0x000000007F6EC000 0004C4 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1148MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]   HighMem  [mem 0x00000000379fe000-0x000000007f679fff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f4d1fff]
[    0.000000]   node   0: [mem 0x000000007f4dd000-0x000000007f533fff]
[    0.000000]   node   0: [mem 0x000000007f537000-0x000000007f5bafff]
[    0.000000]   node   0: [mem 0x000000007f5bf000-0x000000007f679fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f679fff]
[    0.000000] On node 0 totalpages: 521734
[    0.000000] free_area_init_node: node 0, pgdat ce7e67c0, node_mem_map f4cd3024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1967 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 293994 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 20 pages/cpu @f79d3000 s50764 r0 d31156 u81920
[    0.000000] pcpu-alloc: s50764 r0 d31156 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519731
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-686-pae root=UUID=a5b1a8c1-f60b-4bb8-9900-a8090fe2f686 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0007f67a)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2040620K/2086936K available (5825K kernel code, 646K rwdata, 1716K rodata, 752K init, 456K bss, 46316K reserved, 0K cma-reserved, 1175976K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                     .init : 0xce803000 - 0xce8bf000   ( 752 kB)
                     .data : 0xce5b0b14 - 0xce801b00   (2371 kB)
                     .text : 0xce000000 - 0xce5b0b14   (5826 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 32.
[    0.000000]    RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f742e000 soft=f7430000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1995.057 MHz processor
[    0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.11 BogoMIPS (lpj=7980228)
[    0.004017] pid_max: default: 32768 minimum: 301
[    0.004043] ACPI: Core revision 20160831
[    0.013827] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.013873] Security Framework initialized
[    0.013875] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.013885] AppArmor: AppArmor disabled by boot time parameter
[    0.013904] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.013906] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.014290] mce: CPU supports 6 MCE banks
[    0.014300] CPU0: Thermal monitoring enabled (TM1)
[    0.014304] process: using mwait in idle threads
[    0.014312] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.014313] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.028009] ftrace: allocating 24038 entries in 47 pages
[    0.036123] smpboot: Max logical packages: 2
[    0.036131] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036604] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080000] smpboot: CPU0: Intel(R) Celeron(R) CPU          550  @ 2.00GHz (family: 0x6, model: 0x16, stepping: 0x1)
[    0.080000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[    0.080000] ... version:                2
[    0.080000] ... bit width:              40
[    0.080000] ... generic registers:      2
[    0.080000] ... value mask:             000000ffffffffff
[    0.080000] ... max period:             000000007fffffff
[    0.080000] ... fixed-purpose events:   3
[    0.080000] ... event mask:             0000000700000003
[    0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.080000] x86: Booted up 1 node, 1 CPUs
[    0.080000] smpboot: Total of 1 processors activated (3990.11 BogoMIPS)
[    0.080000] devtmpfs: initialized
[    0.080000] PM: Registering ACPI NVS region [mem 0x7f67a000-0x7f6befff] (282624 bytes)
[    0.080000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.080000] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.080000] pinctrl core: initialized pinctrl subsystem
[    0.080000] NET: Registered protocol family 16
[    0.080000] cpuidle: using governor ladder
[    0.080000] cpuidle: using governor menu
[    0.080000] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.080000] Simple Boot Flag at 0x44 set to 0x1
[    0.080000] ACPI: bus type PCI registered
[    0.080000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.080000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.080000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.080000] PCI: Using MMCONFIG for extended config space
[    0.080000] PCI: Using configuration type 1 for base access
[    0.080000] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.080265] ACPI: Added _OSI(Module Device)
[    0.080267] ACPI: Added _OSI(Processor Device)
[    0.080268] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.080270] ACPI: Added _OSI(Processor Aggregator Device)
[    0.080504] ACPI: Executed 1 blocks of module-level executable AML code
[    0.082448] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.084668] ACPI : EC: EC started
[    0.084670] ACPI : EC: interrupt blocked
[    0.135893] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC
[    0.135896] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.135898] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions
[    0.135899] ACPI: Interpreter enabled
[    0.135934] ACPI: (supports S0 S3 S4 S5)
[    0.135935] ACPI: Using IOAPIC for interrupt routing
[    0.135973] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.291587] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.368555] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.368562] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.368569] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20160831/nsarguments-189)
[    0.368800] acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM
[    0.369384] PCI host bridge to bus 0000:00
[    0.369387] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.369389] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.369391] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.369393] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.369395] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.369407] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.369547] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[    0.369563] pci 0000:00:02.0: reg 0x10: [mem 0x91000000-0x910fffff 64bit]
[    0.369573] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.369579] pci 0000:00:02.0: reg 0x20: [io  0x30d0-0x30d7]
[    0.369708] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[    0.369721] pci 0000:00:02.1: reg 0x10: [mem 0x91100000-0x911fffff 64bit]
[    0.369907] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.369934] pci 0000:00:1b.0: reg 0x10: [mem 0x92400000-0x92403fff 64bit]
[    0.370057] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.370183] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.370308] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.370376] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.370447] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.370509] pci 0000:00:1d.0: reg 0x20: [io  0x3080-0x309f]
[    0.370640] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.370702] pci 0000:00:1d.1: reg 0x20: [io  0x3060-0x307f]
[    0.370833] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.370895] pci 0000:00:1d.2: reg 0x20: [io  0x3040-0x305f]
[    0.371036] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.371060] pci 0000:00:1d.7: reg 0x10: [mem 0x92404800-0x92404bff]
[    0.371175] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.371287] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.371417] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.371480] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.371603] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.371609] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.371616] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[    0.371753] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.371771] pci 0000:00:1f.1: reg 0x10: [io  0x30c8-0x30cf]
[    0.371784] pci 0000:00:1f.1: reg 0x14: [io  0x30e4-0x30e7]
[    0.371796] pci 0000:00:1f.1: reg 0x18: [io  0x30c0-0x30c7]
[    0.371809] pci 0000:00:1f.1: reg 0x1c: [io  0x30e0-0x30e3]
[    0.371821] pci 0000:00:1f.1: reg 0x20: [io  0x30a0-0x30af]
[    0.371849] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.371851] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.371852] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.371854] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.371965] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.371990] pci 0000:00:1f.2: reg 0x10: [io  0x30b8-0x30bf]
[    0.372007] pci 0000:00:1f.2: reg 0x14: [io  0x30dc-0x30df]
[    0.372020] pci 0000:00:1f.2: reg 0x18: [io  0x30b0-0x30b7]
[    0.372032] pci 0000:00:1f.2: reg 0x1c: [io  0x30d8-0x30db]
[    0.372045] pci 0000:00:1f.2: reg 0x20: [io  0x3020-0x303f]
[    0.372058] pci 0000:00:1f.2: reg 0x24: [mem 0x92404000-0x924047ff]
[    0.372126] pci 0000:00:1f.2: PME# supported from D3hot
[    0.372236] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.372255] pci 0000:00:1f.3: reg 0x10: [mem 0x92404c00-0x92404cff]
[    0.372300] pci 0000:00:1f.3: reg 0x20: [io  0x3000-0x301f]
[    0.372529] pci 0000:01:00.0: [168c:001c] type 00 class 0x020000
[    0.372567] pci 0000:01:00.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[    0.372847] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.372861] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.372866] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.372871] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x923fffff]
[    0.372879] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.372946] pci 0000:02:01.0: [10ec:8139] type 00 class 0x020000
[    0.372971] pci 0000:02:01.0: reg 0x10: [io  0x1000-0x10ff]
[    0.372986] pci 0000:02:01.0: reg 0x14: [mem 0x91200000-0x912000ff]
[    0.373096] pci 0000:02:01.0: supports D1 D2
[    0.373098] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[    0.373220] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.373225] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.373230] pci 0000:00:1e.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.373238] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.373240] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.373242] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.373244] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.373262] pci_bus 0000:00: on NUMA node 0
[    0.373357] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.373452] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.373545] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.373636] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.373728] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.373819] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[    0.373910] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.374002] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[    0.374602] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.374741] ACPI : EC: interrupt unblocked
[    0.374752] ACPI : EC: event unblocked
[    0.374760] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.374762] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.374914] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.374916] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.374919] vgaarb: loaded
[    0.374920] vgaarb: bridge control possible 0000:00:02.0
[    0.375032] PCI: Using ACPI for IRQ routing
[    0.387256] PCI: pci_cache_line_size set to 64 bytes
[    0.387319] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.387321] e820: reserve RAM buffer [mem 0x7f4d2000-0x7fffffff]
[    0.387323] e820: reserve RAM buffer [mem 0x7f534000-0x7fffffff]
[    0.387325] e820: reserve RAM buffer [mem 0x7f5bb000-0x7fffffff]
[    0.387326] e820: reserve RAM buffer [mem 0x7f67a000-0x7fffffff]
[    0.387570] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.387577] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.387581] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.389035] clocksource: Switched to clocksource hpet
[    0.398645] VFS: Disk quotas dquot_6.6.0
[    0.398678] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.398815] pnp: PnP ACPI init
[    0.468265] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1e.0 BAR 13 [io  0x1000-0x1fff]
[    0.468333] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.468336] system 00:00: [io  0x0610] has been reserved
[    0.468338] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.468340] system 00:00: [io  0x0810-0x0817] has been reserved
[    0.468342] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.468345] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.468347] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.468350] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.468353] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.468355] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.468358] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.468360] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.468362] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.468364] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.468369] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.468433] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.468527] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.468576] pnp 00:03: Plug and Play ACPI device, IDs AUI0214 PNP0f13 (active)
[    0.468666] pnp: PnP ACPI: found 4 devices
[    0.468670] PnPBIOS: Disabled by ACPI PNP
[    0.505580] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.505620] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.505625] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.505632] pci 0000:00:1c.0:   bridge window [mem 0x91300000-0x923fffff]
[    0.505636] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.505645] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.505648] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.505654] pci 0000:00:1e.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.505667] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.505669] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.505671] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.505672] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.505674] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.505676] pci_bus 0000:01: resource 1 [mem 0x91300000-0x923fffff]
[    0.505678] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[    0.505680] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.505681] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
[    0.505683] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.505685] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.505686] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.505688] pci_bus 0000:02: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.505797] NET: Registered protocol family 2
[    0.506030] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.506049] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.506080] TCP: Hash tables configured (established 8192 bind 8192)
[    0.506115] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.506124] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.506188] NET: Registered protocol family 1
[    0.506209] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.507848] PCI: CLS 0 bytes, default 64
[    0.507921] Unpacking initramfs...
[    0.942563] Freeing initrd memory: 16988K
[    0.943211] audit: initializing netlink subsys (disabled)
[    0.943246] audit: type=2000 audit(1509290519.940:1): initialized
[    0.943711] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    0.943733] zbud: loaded
[    0.944540] bounce: pool size: 64 pages
[    0.944559] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.944593] io scheduler noop registered
[    0.944594] io scheduler deadline registered
[    0.944610] io scheduler cfq registered (default)
[    0.945112] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.945120] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.945147] intel_idle: does not run on family 6 model 22
[    0.945295] Monitor-Mwait will be used to enter C-1 state
[    0.945302] Monitor-Mwait will be used to enter C-2 state
[    0.945306] Monitor-Mwait will be used to enter C-3 state
[    0.945310] tsc: Marking TSC unstable due to TSC halts in idle
[    0.945453] GHES: HEST is not enabled!
[    0.945472] isapnp: Scanning for PnP cards...
[    1.299684] isapnp: No Plug & Play device found
[    1.299780] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.300399] Linux agpgart interface v0.103
[    1.300723] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.333238] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.333246] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.333432] mousedev: PS/2 mouse device common for all mice
[    1.335696] rtc_cmos 00:01: RTC can wake from S4
[    1.335870] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.335904] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.335924] ledtrig-cpu: registered to indicate activity on CPUs
[    1.336339] NET: Registered protocol family 10
[    1.336651] mip6: Mobile IPv6
[    1.336654] NET: Registered protocol family 17
[    1.336657] mpls_gso: MPLS GSO support
[    1.336857] microcode: sig=0x10661, pf=0x80, revision=0x16
[    1.336900] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.336904] Using IPI No-Shortcut mode
[    1.337059] registered taskstats version 1
[    1.337077] zswap: loaded using pool lzo/zbud
[    1.337141] ima: No TPM chip found, activating TPM-bypass!
[    1.337481] rtc_cmos 00:01: setting system clock to 2017-10-29 15:22:01 UTC (1509290521)
[    1.337574] PM: Hibernation image not present or could not be loaded.
[    1.337952] Freeing unused kernel memory: 752K
[    1.338007] Write protecting the kernel text: 5828k
[    1.338051] Write protecting the kernel read-only data: 1724k
[    1.338052] NX-protecting the kernel data: 4412k
[    1.338210] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.357980] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.358290] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.358962] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.360587] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.360698] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.361851] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.361876] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.361924] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.361935] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.361958] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.361972] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.436936] ACPI: bus type USB registered
[    1.436973] usbcore: registered new interface driver usbfs
[    1.436988] usbcore: registered new interface driver hub
[    1.437018] usbcore: registered new device driver usb
[    1.437727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.438161] uhci_hcd: USB Universal Host Controller Interface driver
[    1.440540] ehci-pci: EHCI PCI platform driver
[    1.443581] SCSI subsystem initialized
[    1.448677] thermal LNXTHERM:00: registered as thermal_zone0
[    1.448679] ACPI: Thermal Zone [TZ01] (63 C)
[    1.449918] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.449922] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.450431] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.451233] 8139too 0000:02:01.0 eth0: RealTek RTL8139 at 0xf8214000, 00:1e:ec:18:51:92, IRQ 16
[    1.454584] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.454595] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.454609] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.454646] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003080
[    1.455517] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.455520] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.455522] usb usb1: Product: UHCI Host Controller
[    1.455524] usb usb1: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[    1.455525] usb usb1: SerialNumber: 0000:00:1d.0
[    1.455729] hub 1-0:1.0: USB hub found
[    1.455738] hub 1-0:1.0: 2 ports detected
[    1.456451] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.456459] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.456474] ehci-pci 0000:00:1d.7: debug port 1
[    1.460394] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.464201] ehci-pci 0000:00:1d.7: irq 23, io mem 0x92404800
[    1.465549] libata version 3.00 loaded.
[    1.482114] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.482237] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.482240] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.482242] usb usb2: Product: EHCI Host Controller
[    1.482243] usb usb2: Manufacturer: Linux 4.9.0-4-686-pae ehci_hcd
[    1.482245] usb usb2: SerialNumber: 0000:00:1d.7
[    1.482434] hub 2-0:1.0: USB hub found
[    1.482445] hub 2-0:1.0: 6 ports detected
[    1.508163] hub 1-0:1.0: USB hub found
[    1.510793] hub 1-0:1.0: 2 ports detected
[    1.511309] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.511675] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.511684] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.511693] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.511725] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003060
[    1.511843] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.511845] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.511847] usb usb3: Product: UHCI Host Controller
[    1.511848] usb usb3: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[    1.511850] usb usb3: SerialNumber: 0000:00:1d.1
[    1.512090] hub 3-0:1.0: USB hub found
[    1.512114] hub 3-0:1.0: 2 ports detected
[    1.512449] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.512456] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.512464] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.512488] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003040
[    1.512563] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.512565] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.512567] usb usb4: Product: UHCI Host Controller
[    1.512569] usb usb4: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[    1.512570] usb usb4: SerialNumber: 0000:00:1d.2
[    1.512734] hub 4-0:1.0: USB hub found
[    1.512742] hub 4-0:1.0: 2 ports detected
[    1.512898] ahci 0000:00:1f.2: version 3.0
[    1.513206] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.513236] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[    1.513239] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
[    1.523265] scsi host0: ahci
[    1.529073] 8139too 0000:02:01.0 enp2s1: renamed from eth0
[    1.534612] scsi host1: ahci
[    1.547693] scsi host2: ahci
[    1.547812] ata1: SATA max UDMA/133 abar m2048@0x92404000 port 0x92404100 irq 25
[    1.547814] ata2: DUMMY
[    1.547815] ata3: DUMMY
[    1.547883] ata_piix 0000:00:1f.1: version 2.13
[    1.549933] scsi host3: ata_piix
[    1.550221] scsi host4: ata_piix
[    1.550304] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
[    1.550306] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
[    1.740416] ata4.00: ATAPI: TSSTcorp CDDVDW TS-L632H, HS02, max MWDMA2
[    1.764929] ata4.00: configured for MWDMA2
[    1.808023] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.952063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3983e1ae5fa, max_idle_ns: 881590641957 ns
[    1.957629] usb 2-1: New USB device found, idVendor=04b4, idProduct=6572
[    1.957632] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.957633] usb 2-1: Product: USB2.0 Hub
[    1.958366] hub 2-1:1.0: USB hub found
[    1.958758] hub 2-1:1.0: 3 ports detected
[    2.020509] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.021065] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.021070] ata1.00: ATA-8: FUJITSU MHY2120BH, 890B, max UDMA/100
[    2.021072] ata1.00: 234441648 sectors, multi 16: LBA48
[    2.021690] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.021695] ata1.00: configured for UDMA/100
[    2.021910] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHY2120B 890B PQ: 0 ANSI: 5
[    2.029840] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632H  HS02 PQ: 0 ANSI: 5
[    2.048757] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.048820] sd 0:0:0:0: [sda] Write Protect is off
[    2.048823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.048850] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.069842] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.069845] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.070361] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.080021] random: fast init done
[    2.080040] usb 2-6: new high-speed USB device number 3 using ehci-pci
[    2.114240]  sda: sda1 sda2 < sda5 sda6 >
[    2.115331] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.248027] usb 2-6: New USB device found, idVendor=04f2, idProduct=b057
[    2.248030] usb 2-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.248032] usb 2-6: Product: CNF7041
[    2.248033] usb 2-6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.248035] usb 2-6: SerialNumber: SN0001
[    2.308073] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[    2.421636] usb 2-1.2: New USB device found, idVendor=045e, idProduct=07b2
[    2.421640] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.421642] usb 2-1.2: Product: Microsoft® 2.4GHz Transceiver v8.0
[    2.421643] usb 2-1.2: Manufacturer: Microsoft
[    2.425180] hidraw: raw HID events driver (C) Jiri Kosina
[    2.442345] usbcore: registered new interface driver usbhid
[    2.442347] usbhid: USB HID core driver
[    2.444764] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.0/0003:045E:07B2.0001/input/input3
[    2.500043] usb 2-1.3: new full-speed USB device number 5 using ehci-pci
[    2.504690] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:1d.7-1.2/input0
[    2.506243] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.1/0003:045E:07B2.0002/input/input4
[    2.506787] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:1d.7-1.2/input1
[    2.518854] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.2/0003:045E:07B2.0003/input/input5
[    2.576988] hid-generic 0003:045E:07B2.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:1d.7-1.2/input2
[    2.610135] usb 2-1.3: New USB device found, idVendor=1e7d, idProduct=3232
[    2.610139] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.610140] usb 2-1.3: Product: ROCCAT Ryos MK Pro
[    2.610142] usb 2-1.3: Manufacturer: ROCCAT
[    2.615270] input: ROCCAT ROCCAT Ryos MK Pro as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/0003:1E7D:3232.0004/input/input6
[    2.672615] ryos 0003:1E7D:3232.0004: input,hidraw3: USB HID v1.11 Keyboard [ROCCAT ROCCAT Ryos MK Pro] on usb-0000:00:1d.7-1.3/input0
[    2.705143] input: ROCCAT ROCCAT Ryos MK Pro as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.1/0003:1E7D:3232.0005/input/input7
[    2.764727] ryos 0003:1E7D:3232.0005: input,hiddev0,hidraw4: USB HID v1.11 Pointer [ROCCAT ROCCAT Ryos MK Pro] on usb-0000:00:1d.7-1.3/input1
[    2.805597] PM: Starting manual resume from disk
[    2.805602] PM: Hibernation image partition 8:5 present
[    2.805603] PM: Looking for hibernation image.
[    2.805857] PM: Image not found (code -22)
[    2.805858] PM: Hibernation image not present or could not be loaded.
[    2.894117] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[    3.013579] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.178535] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.298058] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.298213] systemd[1]: Detected architecture x86.
[    4.308078] systemd[1]: Set hostname to <debianlt>.
[    4.853135] random: crng init done
[    5.366229] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.366361] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.366439] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.366538] systemd[1]: Listening on Syslog Socket.
[    5.366601] systemd[1]: Listening on udev Kernel Socket.
[    5.366678] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.366752] systemd[1]: Listening on udev Control Socket.
[    6.088063] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.508154] systemd-journald[177]: Received request to flush runtime journal from PID 1
[    7.225174] [drm] Initialized
[    7.289043] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
[    7.289050] ACPI: Power Button [PWRB]
[    7.289171] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
[    7.289192] ACPI: Lid Switch [LID0]
[    7.289255] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
[    7.289257] ACPI: Sleep Button [SLPB]
[    7.289715] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
[    7.289719] ACPI: Power Button [PWRF]
[    7.493712] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.552207] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20160831/utaddress-247)
[    7.552216] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000043B (\_SB.PCI0.LPC.PMA1) (20160831/utaddress-247)
[    7.552221] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.552225] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000052D (\GPIO) (20160831/utaddress-247)
[    7.552229] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.552267] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.570768] ACPI: Battery Slot [BAT0] (battery present)
[    7.656150] ACPI: AC Adapter [AC] (on-line)
[    7.683327] wmi: Mapper loaded
[    7.730642] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[    7.731157] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[    7.731160] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.731162] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    7.731163] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    7.731165] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    7.731167] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1d
[    7.731169] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x18
[    7.731917] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    7.743031] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    7.743249] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    7.743302] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    7.761827] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.761884] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    8.102829] input: PC Speaker as /devices/platform/pcspkr/input/input15
[    8.224147] pci 0000:00:00.0: Intel 965GM Chipset
[    8.224173] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    8.224296] pci 0000:00:00.0: detected 8192K stolen memory
[    8.224333] [drm] Memory usable by graphics device = 512M
[    8.224336] [drm] Replacing VGA console driver
[    8.225344] Console: switching to colour dummy device 80x25
[    8.233470] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.233472] [drm] Driver supports precise vblank timestamp query.
[    8.235870] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.278779] [drm] RC6 disabled, disabling runtime PM support
[    8.278800] [drm] initialized overlay support
[    8.279236] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    8.280387] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    8.287626] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    8.298143] acpi device:15: registered as cooling_device1
[    8.298254] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[    8.298467] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    8.394309] media: Linux media interface: v0.10
[    8.442560] intel_powerclamp: No package C-state available
[    8.457866] iTCO_vendor_support: vendor-support=0
[    8.733051] Linux video capture interface: v2.00
[    8.780403] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.780463] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[    8.781093] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.822776] input: HP WMI hotkeys as /devices/virtual/input/input17
[    8.857366] uvcvideo: Found UVC 1.00 device CNF7041 (04f2:b057)
[    8.861253] uvcvideo 2-6:1.0: Entity type for entity Extension 5 was not initialized!
[    8.861258] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[    8.861260] uvcvideo 2-6:1.0: Entity type for entity Processing 3 was not initialized!
[    8.861262] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[    8.861396] input: CNF7041 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input18
[    8.862155] usbcore: registered new interface driver uvcvideo
[    8.862157] USB Video Class driver (1.1.1)
[    9.006763] ath5k 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    9.006935] ath5k 0000:01:00.0: registered as 'phy0'
[    9.540243] ath: EEPROM regdomain: 0x67
[    9.540245] ath: EEPROM indicates we should expect a direct regpair map
[    9.540247] ath: Country alpha2 being used: 00
[    9.540248] ath: Regpair used: 0x67
[   10.228106] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.228552] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   11.216135] ath5k 0000:01:00.0 wlp1s0: renamed from wlan0
[   11.638373] Adding 2928636k swap on /dev/sda5.  Priority:-1 extents:1 across:2928636k FS
[   12.467629] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   17.106951] NET: Registered protocol family 4
[   17.130174] NET: Registered protocol family 3
[   17.148566] NET: Registered protocol family 5
[   17.211908] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   18.656040] [drm:drm_atomic_helper_commit_cleanup_done [drm_kms_helper]] *ERROR* [CRTC:26:pipe A] flip_done timed out
[   18.760026] ------------[ cut here ]------------
[   18.760040] WARNING: CPU: 0 PID: 92 at /build/linux-Ou008s/linux-4.9.51/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x189/0x190 [drm]
[   18.760041] vblank wait timed out on crtc 0
[   18.760044] Modules linked in: appletalk ax25 ipx p8023 p8022 psnap llc arc4 ath5k uvcvideo videobuf2_vmalloc videobuf2_memops hp_wmi videobuf2_v4l2 iTCO_wdt videobuf2_core videodev sparse_keymap ath mac80211 iTCO_vendor_support media coretemp i915 serio_raw joydev evdev pcspkr cfg80211 rfkill sg snd_hda_codec_conexant snd_hda_codec_generic wmi snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep lpc_ich mfd_core ac shpchp battery video snd_pcm snd_timer snd soundcore button drm_kms_helper drm i2c_algo_bit ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb xts lrw gf128mul ablk_helper cryptd aes_i586 mbcache hid_roccat_ryos hid_roccat hid_roccat_common hid_generic usbhid hid sr_mod cdrom sd_mod ata_generic ata_piix ahci libahci psmouse 8139too 8139cp mii i2c_i801 i2c_smbus libata
[   18.760098]  scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common thermal
[   18.760106] CPU: 0 PID: 92 Comm: kworker/u4:3 Not tainted 4.9.0-4-686-pae #1 Debian 4.9.51-1
[   18.760107] Hardware name: Hewlett-Packard HP G7000 Notebook PC/30D9, BIOS F.31 02/29/2008
[   18.760116] Workqueue: events_unbound async_run_entry_fn
[   18.760118]  f6d47bac ce2f2ad2 f6d47bc0 00000000 ce066d4a f87e3a54 f6d47be0 0000005c
[   18.760123]  f87e36a0 000004e6 f87bc529 000004e6 00000009 f87bc529 f6500000 00000000
[   18.760127]  00000000 f6d47bcc ce066db6 00000009 00000000 f6d47bc0 f87e3a54 f6d47be0
[   18.760131] Call Trace:
[   18.760136]  [<ce2f2ad2>] ? dump_stack+0x55/0x73
[   18.760139]  [<ce066d4a>] ? __warn+0xea/0x110
[   18.760147]  [<f87bc529>] ? drm_wait_one_vblank+0x189/0x190 [drm]
[   18.760153]  [<f87bc529>] ? drm_wait_one_vblank+0x189/0x190 [drm]
[   18.760156]  [<ce066db6>] ? warn_slowpath_fmt+0x46/0x60
[   18.760162]  [<f87bc529>] ? drm_wait_one_vblank+0x189/0x190 [drm]
[   18.760166]  [<ce0a8bc0>] ? prepare_to_wait_event+0xd0/0xd0
[   18.760229]  [<f8dfcc0a>] ? intel_get_load_detect_pipe+0x6fa/0x710 [i915]
[   18.760270]  [<f8e3a562>] ? intel_tv_detect+0x142/0x5e0 [i915]
[   18.760279]  [<f87c621e>] ? drm_for_each_detailed_block+0x2e/0x110 [drm]
[   18.760285]  [<f88120b0>] ? drm_helper_probe_single_connector_modes+0x3f0/0x500 [drm_kms_helper]
[   18.760290]  [<f882011a>] ? drm_fb_helper_initial_config+0x9a/0x410 [drm_kms_helper]
[   18.760293]  [<ce0a2f90>] ? pick_next_task_fair+0x490/0x520
[   18.760332]  [<f8e13a56>] ? intel_fbdev_initial_config+0x16/0x30 [i915]
[   18.760334]  [<ce087155>] ? async_run_entry_fn+0x35/0x170
[   18.760337]  [<ce07ee21>] ? process_one_work+0x141/0x380
[   18.760339]  [<ce07f0a1>] ? worker_thread+0x41/0x460
[   18.760341]  [<ce084314>] ? kthread+0xb4/0xd0
[   18.760343]  [<ce07f060>] ? process_one_work+0x380/0x380
[   18.760345]  [<ce084260>] ? kthread_park+0x50/0x50
[   18.760347]  [<ce5ae643>] ? ret_from_fork+0x1b/0x28
[   18.760349] ---[ end trace 2a67807ce2538af1 ]---
[   18.897091] ------------[ cut here ]------------
[   18.897104] WARNING: CPU: 0 PID: 92 at /build/linux-Ou008s/linux-4.9.51/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x189/0x190 [drm]
[   18.897105] vblank wait timed out on crtc 0
[   18.897106] Modules linked in: appletalk ax25 ipx p8023 p8022 psnap llc arc4 ath5k uvcvideo videobuf2_vmalloc videobuf2_memops hp_wmi videobuf2_v4l2 iTCO_wdt videobuf2_core videodev sparse_keymap ath mac80211 iTCO_vendor_support media coretemp i915 serio_raw joydev evdev pcspkr cfg80211 rfkill sg snd_hda_codec_conexant snd_hda_codec_generic wmi snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep lpc_ich mfd_core ac shpchp battery video snd_pcm snd_timer snd soundcore button drm_kms_helper drm i2c_algo_bit ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb xts lrw gf128mul ablk_helper cryptd aes_i586 mbcache hid_roccat_ryos hid_roccat hid_roccat_common hid_generic usbhid hid sr_mod cdrom sd_mod ata_generic ata_piix ahci libahci psmouse 8139too 8139cp mii i2c_i801 i2c_smbus libata
[   18.897157]  scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common thermal
[   18.897165] CPU: 0 PID: 92 Comm: kworker/u4:3 Tainted: G        W       4.9.0-4-686-pae #1 Debian 4.9.51-1
[   18.897166] Hardware name: Hewlett-Packard HP G7000 Notebook PC/30D9, BIOS F.31 02/29/2008
[   18.897170] Workqueue: events_unbound async_run_entry_fn
[   18.897172]  f6d47b2c ce2f2ad2 f6d47b40 00000000 ce066d4a f87e3a54 f6d47b60 0000005c
[   18.897176]  f87e36a0 000004e6 f87bc529 000004e6 00000009 f87bc529 f6500000 00000000
[   18.897180]  00000000 f6d47b4c ce066db6 00000009 00000000 f6d47b40 f87e3a54 f6d47b60
[   18.897184] Call Trace:
[   18.897188]  [<ce2f2ad2>] ? dump_stack+0x55/0x73
[   18.897192]  [<ce066d4a>] ? __warn+0xea/0x110
[   18.897199]  [<f87bc529>] ? drm_wait_one_vblank+0x189/0x190 [drm]
[   18.897206]  [<f87bc529>] ? drm_wait_one_vblank+0x189/0x190 [drm]
[   18.897208]  [<ce066db6>] ? warn_slowpath_fmt+0x46/0x60
[   18.897215]  [<f87bc529>] ? drm_wait_one_vblank+0x189/0x190 [drm]
[   18.897218]  [<ce0a8bc0>] ? prepare_to_wait_event+0xd0/0xd0
[   18.897269]  [<f8df6712>] ? intel_pre_plane_update+0x122/0x140 [i915]
[   18.897308]  [<f8df6cf5>] ? intel_atomic_commit_tail+0x135/0xf40 [i915]
[   18.897347]  [<f8e08403>] ? intel_fbc_choose_crtc+0x23/0x1e0 [i915]
[   18.897385]  [<f8dff06a>] ? intel_prepare_plane_fb+0x12a/0x2a0 [i915]
[   18.897391]  [<f881934c>] ? drm_atomic_helper_swap_state+0x1cc/0x2d0 [drm_kms_helper]
[   18.897429]  [<f8df7e35>] ? intel_atomic_commit+0x335/0x4c0 [i915]
[   18.897437]  [<f87cf101>] ? drm_atomic_check_only+0x321/0x6a0 [drm]
[   18.897475]  [<f8dd0a60>] ? gen2_write16+0x120/0x120 [i915]
[   18.897483]  [<f87cf4c9>] ? drm_atomic_commit+0x49/0x50 [drm]
[   18.897522]  [<f8dfcc77>] ? intel_release_load_detect_pipe+0x57/0xa0 [i915]
[   18.897562]  [<f8e3a7bf>] ? intel_tv_detect+0x39f/0x5e0 [i915]
[   18.897568]  [<f88120b0>] ? drm_helper_probe_single_connector_modes+0x3f0/0x500 [drm_kms_helper]
[   18.897572]  [<f882011a>] ? drm_fb_helper_initial_config+0x9a/0x410 [drm_kms_helper]
[   18.897576]  [<ce0a2f90>] ? pick_next_task_fair+0x490/0x520
[   18.897614]  [<f8e13a56>] ? intel_fbdev_initial_config+0x16/0x30 [i915]
[   18.897616]  [<ce087155>] ? async_run_entry_fn+0x35/0x170
[   18.897619]  [<ce07ee21>] ? process_one_work+0x141/0x380
[   18.897621]  [<ce07f0a1>] ? worker_thread+0x41/0x460
[   18.897623]  [<ce084314>] ? kthread+0xb4/0xd0
[   18.897625]  [<ce07f060>] ? process_one_work+0x380/0x380
[   18.897627]  [<ce084260>] ? kthread_park+0x50/0x50
[   18.897629]  [<ce5ae643>] ? ret_from_fork+0x1b/0x28
[   18.897631] ---[ end trace 2a67807ce2538af2 ]---
[   18.959533] fbcon: inteldrmfb (fb0) is primary device
[   19.723112] Console: switching to colour frame buffer device 160x48
[   19.743929] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   23.062491] 8139too 0000:02:01.0 enp2s1: link down
[   23.062595] IPv6: ADDRCONF(NETDEV_UP): enp2s1: link is not ready
[   26.933656] fuse init (API version 7.26)
[   34.808980] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   37.247004] 8139too 0000:02:01.0 enp2s1: link down
[   37.247109] IPv6: ADDRCONF(NETDEV_UP): enp2s1: link is not ready
[   37.701618] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  116.521316] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  116.596258] 8139too 0000:02:01.0 enp2s1: link down
[  116.596423] IPv6: ADDRCONF(NETDEV_UP): enp2s1: link is not ready
[  116.711145] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  117.757938] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  117.834726] 8139too 0000:02:01.0 enp2s1: link down
[  117.834893] IPv6: ADDRCONF(NETDEV_UP): enp2s1: link is not ready
[  190.661325] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  190.737696] 8139too 0000:02:01.0 enp2s1: link down
[  190.737875] IPv6: ADDRCONF(NETDEV_UP): enp2s1: link is not ready
[  327.075582] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  327.155075] 8139too 0000:02:01.0 enp2s1: link down
[  327.155238] IPv6: ADDRCONF(NETDEV_UP): enp2s1: link is not ready
[  327.315745] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  329.652447] wlp1s0: authenticate with 00:3a:7d:d1:1a:a0
[  329.656967] wlp1s0: send auth to 00:3a:7d:d1:1a:a0 (try 1/3)
[  329.657946] wlp1s0: authenticated
[  329.660039] wlp1s0: associate with 00:3a:7d:d1:1a:a0 (try 1/3)
[  329.664614] wlp1s0: RX AssocResp from 00:3a:7d:d1:1a:a0 (capab=0x431 status=0 aid=5)
[  329.664713] wlp1s0: associated
[  329.664753] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  329.706483] ath: EEPROM regdomain: 0x80d0
[  329.706486] ath: EEPROM indicates we should expect a country code
[  329.706487] ath: doing EEPROM country->regdmn map search
[  329.706488] ath: country maps to regdmn code: 0x37
[  329.706489] ath: Country alpha2 being used: DK
[  329.706489] ath: Regpair used: 0x37
[  329.706491] ath: regdomain 0x80d0 dynamically updated by country IE
[  329.744894] wlp1s0: Limiting TX power to 7 dBm as advertised by 00:3a:7d:d1:1a:a0
[  428.156486] perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[  516.009279] perf: interrupt took too long (3164 > 3140), lowering kernel.perf_event_max_sample_rate to 63000
[  571.648139] perf: interrupt took too long (3956 > 3955), lowering kernel.perf_event_max_sample_rate to 50500
[ 1050.235347] perf: interrupt took too long (4946 > 4945), lowering kernel.perf_event_max_sample_rate to 40250

I have been trying to resolve this problem for hours, without any luck. Help is appreciated!
Frzs
 
Posts: 2
Joined: 2017-10-29 15:22

Re: Slow Atheros wifi card

Postby shep » 2017-10-29 16:56

Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)


This is a b/g card with maximum data transmission rate of 31.4Mbps Wikipedia Reference
802.11g is the third modulation standard for wireless LANs. It works in the 2.4 GHz band (like 802.11b) but operates at a maximum raw data rate of 54 Mbit/s. Using the CSMA/CA transmission scheme, 31.4 Mbit/s[1] is the maximum net throughput possible for packets of 1500 bytes in size and a 54 Mbit/s wireless rate (identical to 802.11a core, except for some additional legacy overhead for backward compatibility). In practice, access points may not have an ideal implementation and may therefore not be able to achieve even 31.4 Mbit/s throughput with 1500 byte packets. 1500 bytes is the usual limit for packets on the Internet and therefore a relevant size to benchmark against. Smaller packets give even lower theoretical throughput, down to 3 Mbit/s using 54 Mbit/s rate and 64 byte packets.[1


Given that your second laptop throughput > 31.4 does your second laptop use the athn driver (b/g/n).

Your data transmission rates can also be modulated by signal strength and network congestion, the 2.4Mhz band tends to be more congested that the 5Mhz. You can get more info on the connection from the command iwconfig (will provide channel, signal/noise ratio, maximal packet size etc). Might be worth comparing to the iwconfig output on the second laptop.
shep
 
Posts: 137
Joined: 2011-03-15 15:22

Re: Slow Atheros wifi card

Postby Frzs » 2017-10-29 17:34

Thanks for the fast reply, you are right, the slower is a/b/g, the faster is b/g/n
Here are the specs of the two laptops:
First this, with Windows 10:
Code: Select all
>netsh wlan show all

=======================================================================
============================== SHOW DRIVERS ===========================
=======================================================================


Interface name: Wi-Fi

    Driver                    : Qualcomm Atheros QCA9565 802.11b|g|n WiFi Adapter
    Vendor                    : Qualcomm Atheros Communications Inc.
    Provider                  : Qualcomm Atheros Communications Inc.
    Date                      : 26-03-2016
    Version                   : 3.0.2.201
    INF file                  : athw8x.inf
    Type                      : Native Wi-Fi Driver
    Radio types supported     : 802.11b 802.11g 802.11n
    FIPS 140-2 mode supported : Yes
    802.11w Management Frame Protection supported : Yes
    Hosted network supported  : Yes
    Authentication and cipher supported in infrastructure mode:
                                Open            None
                                Open            WEP-40bit
                                Open            WEP-104bit
                                Open            WEP
                                WPA-Enterprise  TKIP
                                WPA-Personal    TKIP
                                WPA2-Enterprise TKIP
                                WPA2-Personal   TKIP
                                Vendor defined  TKIP
                                WPA2-Enterprise Vendor defined
                                Vendor defined  Vendor defined
                                WPA-Enterprise  CCMP
                                WPA-Personal    CCMP
                                WPA2-Enterprise CCMP
                                Vendor defined  CCMP
                                WPA2-Enterprise Vendor defined
                                Vendor defined  Vendor defined
                                WPA2-Personal   CCMP
                                Vendor defined  Vendor defined
    Authentication and cipher supported in ad-hoc mode:
                                Open            None
                                Open            WEP-40bit
                                Open            WEP-104bit
                                Open            WEP
                                WPA2-Personal   CCMP
                                Vendor defined  Vendor defined
    Wireless Display Supported: Yes (Graphics Driver: Yes, Wi-Fi Driver: Yes)


=======================================================================
============================= SHOW INTERFACES =========================
=======================================================================


There is 1 interface on the system:

    Name                   : Wi-Fi
    Description            : Qualcomm Atheros QCA9565 802.11b|g|n WiFi Adapter
    GUID                   : cd31a1b9-359c-40f5-8fcb-c8814e7857b0
    Physical address       : 40:f0:2f:c5:65:91
    State                  : connected
    SSID                   : LionStreetCollege
    BSSID                  : 00:3a:7d:d1:1a:a0
    Network type           : Infrastructure
    Radio type             : 802.11n
    Authentication         : WPA2-Personal
    Cipher                 : CCMP
    Connection mode        : Profile
    Channel                : 1
    Receive rate (Mbps)    : 72.2
    Transmit rate (Mbps)   : 72.2
    Signal                 : 98%
    Profile                : LionStreetCollege

    Hosted network status  : Not available

Profile LionStreetCollege on interface Wi-Fi:
=======================================================================

Applied: All User Profile

Profile information
-------------------
    Version                : 1
    Type                   : Wireless LAN
    Name                   : LionStreetCollege
    Control options        :
        Connection mode    : Connect automatically
        Network broadcast  : Connect only if this network is broadcasting
        AutoSwitch         : Do not switch to other networks
        MAC Randomization  : Disabled

Connectivity settings
---------------------
    Number of SSIDs        : 1
    SSID name              : "LionStreetCollege"
    Network type           : Infrastructure
    Radio type             : [ Any Radio Type ]
    Vendor extension          : Not present

Security settings
-----------------
    Authentication         : WPA2-Personal
    Cipher                 : CCMP
    Authentication         : WPA2-Personal
    Cipher                 : Unknown
    Security key           : Present

Cost settings
-------------
    Cost                   : Unrestricted
    Congested              : No
    Approaching Data Limit : No
    Over Data Limit        : No
    Roaming                : No
    Cost Source            : Default


=======================================================================
======================= SHOW INTERFACE CAPABILITIES ===================
=======================================================================


Wireless System Capabilities
----------------------------
    Number of antennas connected to the 802.11 radio (value not available)

    Max number of channels the device can operate on, simultaneously (value not available)

    Co-existence Support                        : Unknown


Wireless Device Capabilities
----------------------------

Interface name: Wi-Fi

    WDI Version (Windows)                       : 0.0.0.0

    WDI Version (IHV)                           : 0.0.0.0

    Firmware Version                            :

    Station                                     : Supported

    Soft AP                                     : Supported

    Network monitor mode                        : Supported

    Wi-Fi Direct Device                         : Supported

    Wi-Fi Direct GO                             : Supported

    Wi-Fi Direct Client                         : Supported

    Protected Management Frames                 : Supported

    DOT11k neighbor report                      : Unknown

    ANQP Service Information Discovery          : Not Supported

    Action Frame                                : Not Supported

    Diversity Antenna                           : Unknown

    IBSS                                        : Supported

    Promiscuous Mode                            : Supported

    P2P Device Discovery                        : Not Supported

    P2P Service Name Discovery                  : Not Supported

    P2P Service Info Discovery                  : Not Supported

    P2P Background Discovery                    : Not Supported

    P2P GO on 5 GHz                             : Unknown

    ASP 2.0 Service Name Discovery              : Not Supported

    ASP 2.0 Service Information Discovery       : Not Supported

    IP Docking Capable                          : Not Supported

    FIPS                                        : Supported

    Instant Connect                             : Not Supported

    Dx Standby NLO                              : Not Supported

    Extended Channel Switch Announcement        : Unknown

    Function Level Reset                        : Not Supported

    Platform Level Reset                        : Not Supported

    Bus Level Reset                             : Not Supported

    MAC Randomization                           : Not Supported

    Fast Transition                             : Not Supported

    MU-MIMO                                     : Unknown

    Miracast Sink                               : Unknown

    BSS Transition (802.11v)                    : Unknown

    IHV Extensibility Module Configured         : Not Supported

    Number of Tx Spatial Streams                : 0

    Number of Rx Spatial Streams                : 0

    Number of Concurrent Channels Supported     : 2

    P2P GO ports count                          : 1

    P2P Clients Port Count                      : 2

    P2P Max Mobile AP Clients                   : 128

    Max ANQP Service Advertisements Supported   : 0

    Co-existence Support                        : Unknown


This is connected at 67%:
Code: Select all
sudo iwconfig
lo        no wireless extensions.

wlp1s0    IEEE 802.11  ESSID:"LionStreetCollege" 
          Mode:Managed  Frequency:2.412 GHz  Access Point: 00:3A:7D:D1:1A:A0   
          Bit Rate=36 Mb/s   Tx-Power=7 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=48/70  Signal level=-62 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:402  Invalid misc:3391   Missed beacon:0

enp2s1    no wireless extensions.


So, I guess this is the maximum speed I can get with b/g?
Frzs
 
Posts: 2
Joined: 2017-10-29 15:22


Return to Hardware

Who is online

Users browsing this forum: No registered users and 3 guests

fashionable