Today I installed Debian 9 LXDE. One of my laptops (Win 10) has 36Mbit/44Mbit, and this one with the problem 10,5Mbit/13,5Mbit.
Code: Select all
lspci
01:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
Code: Select all
dmesg
[ 0.000000] Linux version 4.9.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.51-1 (2017-09-28)
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f4d1fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f4d2000-0x000000007f4dcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f4dd000-0x000000007f533fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f534000-0x000000007f536fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f537000-0x000000007f5bafff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f5bb000-0x000000007f5befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f5bf000-0x000000007f679fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f67a000-0x000000007f6befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f6bf000-0x000000007f6fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Hewlett-Packard HP G7000 Notebook PC/30D9, BIOS F.31 02/29/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7f67a max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFFE0000 mask FFFFE0000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 4 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000fe270-0x000fe27f] mapped at [c00fe270]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x0edfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x0e9af000, 0x0e9affff] PGTABLE
[ 0.000000] BRK [0x0e9b0000, 0x0e9b1fff] PGTABLE
[ 0.000000] BRK [0x0e9b2000, 0x0e9b2fff] PGTABLE
[ 0.000000] BRK [0x0e9b3000, 0x0e9b3fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35ec1000-0x36f57fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HP )
[ 0.000000] ACPI: XSDT 0x000000007F6FE120 00006C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000007F6FD000 0000F4 (v04 HP SPARTAN 00000001 LOHR 00000000)
[ 0.000000] ACPI: DSDT 0x000000007F6F4000 00802F (v01 HP SPARTAN 00000001 LOHR 00000000)
[ 0.000000] ACPI: FACS 0x000000007F67D000 000040
[ 0.000000] ACPI: FACS 0x000000007F67D000 000040
[ 0.000000] ACPI: APIC 0x000000007F6F3000 000068 (v02 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[ 0.000000] ACPI: HPET 0x000000007F6F2000 000038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[ 0.000000] ACPI: MCFG 0x000000007F6F1000 00003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[ 0.000000] ACPI: ASF! 0x000000007F6F0000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[ 0.000000] ACPI: SLIC 0x000000007F6EF000 000176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[ 0.000000] ACPI: BOOT 0x000000007F6EE000 000028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[ 0.000000] ACPI: SSDT 0x000000007F6ED000 0005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x000000007F6EC000 0004C4 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1148MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000007f679fff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f4d1fff]
[ 0.000000] node 0: [mem 0x000000007f4dd000-0x000000007f533fff]
[ 0.000000] node 0: [mem 0x000000007f537000-0x000000007f5bafff]
[ 0.000000] node 0: [mem 0x000000007f5bf000-0x000000007f679fff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f679fff]
[ 0.000000] On node 0 totalpages: 521734
[ 0.000000] free_area_init_node: node 0, pgdat ce7e67c0, node_mem_map f4cd3024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1967 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 293994 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 20 pages/cpu @f79d3000 s50764 r0 d31156 u81920
[ 0.000000] pcpu-alloc: s50764 r0 d31156 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519731
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-686-pae root=UUID=a5b1a8c1-f60b-4bb8-9900-a8090fe2f686 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0007f67a)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2040620K/2086936K available (5825K kernel code, 646K rwdata, 1716K rodata, 752K init, 456K bss, 46316K reserved, 0K cma-reserved, 1175976K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xce803000 - 0xce8bf000 ( 752 kB)
.data : 0xce5b0b14 - 0xce801b00 (2371 kB)
.text : 0xce000000 - 0xce5b0b14 (5826 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f742e000 soft=f7430000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1995.057 MHz processor
[ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.11 BogoMIPS (lpj=7980228)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004043] ACPI: Core revision 20160831
[ 0.013827] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.013873] Security Framework initialized
[ 0.013875] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.013885] AppArmor: AppArmor disabled by boot time parameter
[ 0.013904] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.013906] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.014290] mce: CPU supports 6 MCE banks
[ 0.014300] CPU0: Thermal monitoring enabled (TM1)
[ 0.014304] process: using mwait in idle threads
[ 0.014312] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.014313] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.028009] ftrace: allocating 24038 entries in 47 pages
[ 0.036123] smpboot: Max logical packages: 2
[ 0.036131] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036604] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080000] smpboot: CPU0: Intel(R) Celeron(R) CPU 550 @ 2.00GHz (family: 0x6, model: 0x16, stepping: 0x1)
[ 0.080000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.080000] ... version: 2
[ 0.080000] ... bit width: 40
[ 0.080000] ... generic registers: 2
[ 0.080000] ... value mask: 000000ffffffffff
[ 0.080000] ... max period: 000000007fffffff
[ 0.080000] ... fixed-purpose events: 3
[ 0.080000] ... event mask: 0000000700000003
[ 0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080000] x86: Booted up 1 node, 1 CPUs
[ 0.080000] smpboot: Total of 1 processors activated (3990.11 BogoMIPS)
[ 0.080000] devtmpfs: initialized
[ 0.080000] PM: Registering ACPI NVS region [mem 0x7f67a000-0x7f6befff] (282624 bytes)
[ 0.080000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.080000] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.080000] pinctrl core: initialized pinctrl subsystem
[ 0.080000] NET: Registered protocol family 16
[ 0.080000] cpuidle: using governor ladder
[ 0.080000] cpuidle: using governor menu
[ 0.080000] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.080000] Simple Boot Flag at 0x44 set to 0x1
[ 0.080000] ACPI: bus type PCI registered
[ 0.080000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.080000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.080000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.080000] PCI: Using MMCONFIG for extended config space
[ 0.080000] PCI: Using configuration type 1 for base access
[ 0.080000] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.080265] ACPI: Added _OSI(Module Device)
[ 0.080267] ACPI: Added _OSI(Processor Device)
[ 0.080268] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.080270] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.080504] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.082448] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.084668] ACPI : EC: EC started
[ 0.084670] ACPI : EC: interrupt blocked
[ 0.135893] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC
[ 0.135896] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.135898] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions
[ 0.135899] ACPI: Interpreter enabled
[ 0.135934] ACPI: (supports S0 S3 S4 S5)
[ 0.135935] ACPI: Using IOAPIC for interrupt routing
[ 0.135973] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.291587] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.368555] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.368562] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.368569] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20160831/nsarguments-189)
[ 0.368800] acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM
[ 0.369384] PCI host bridge to bus 0000:00
[ 0.369387] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.369389] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.369391] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.369393] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.369395] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.369407] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.369547] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[ 0.369563] pci 0000:00:02.0: reg 0x10: [mem 0x91000000-0x910fffff 64bit]
[ 0.369573] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.369579] pci 0000:00:02.0: reg 0x20: [io 0x30d0-0x30d7]
[ 0.369708] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[ 0.369721] pci 0000:00:02.1: reg 0x10: [mem 0x91100000-0x911fffff 64bit]
[ 0.369907] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.369934] pci 0000:00:1b.0: reg 0x10: [mem 0x92400000-0x92403fff 64bit]
[ 0.370057] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.370183] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.370308] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.370376] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.370447] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.370509] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f]
[ 0.370640] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.370702] pci 0000:00:1d.1: reg 0x20: [io 0x3060-0x307f]
[ 0.370833] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.370895] pci 0000:00:1d.2: reg 0x20: [io 0x3040-0x305f]
[ 0.371036] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.371060] pci 0000:00:1d.7: reg 0x10: [mem 0x92404800-0x92404bff]
[ 0.371175] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.371287] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.371417] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.371480] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.371603] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.371609] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.371616] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[ 0.371753] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[ 0.371771] pci 0000:00:1f.1: reg 0x10: [io 0x30c8-0x30cf]
[ 0.371784] pci 0000:00:1f.1: reg 0x14: [io 0x30e4-0x30e7]
[ 0.371796] pci 0000:00:1f.1: reg 0x18: [io 0x30c0-0x30c7]
[ 0.371809] pci 0000:00:1f.1: reg 0x1c: [io 0x30e0-0x30e3]
[ 0.371821] pci 0000:00:1f.1: reg 0x20: [io 0x30a0-0x30af]
[ 0.371849] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.371851] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.371852] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.371854] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.371965] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 0.371990] pci 0000:00:1f.2: reg 0x10: [io 0x30b8-0x30bf]
[ 0.372007] pci 0000:00:1f.2: reg 0x14: [io 0x30dc-0x30df]
[ 0.372020] pci 0000:00:1f.2: reg 0x18: [io 0x30b0-0x30b7]
[ 0.372032] pci 0000:00:1f.2: reg 0x1c: [io 0x30d8-0x30db]
[ 0.372045] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f]
[ 0.372058] pci 0000:00:1f.2: reg 0x24: [mem 0x92404000-0x924047ff]
[ 0.372126] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.372236] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.372255] pci 0000:00:1f.3: reg 0x10: [mem 0x92404c00-0x92404cff]
[ 0.372300] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
[ 0.372529] pci 0000:01:00.0: [168c:001c] type 00 class 0x020000
[ 0.372567] pci 0000:01:00.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[ 0.372847] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.372861] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.372866] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.372871] pci 0000:00:1c.0: bridge window [mem 0x91300000-0x923fffff]
[ 0.372879] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.372946] pci 0000:02:01.0: [10ec:8139] type 00 class 0x020000
[ 0.372971] pci 0000:02:01.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.372986] pci 0000:02:01.0: reg 0x14: [mem 0x91200000-0x912000ff]
[ 0.373096] pci 0000:02:01.0: supports D1 D2
[ 0.373098] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.373220] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.373225] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.373230] pci 0000:00:1e.0: bridge window [mem 0x91200000-0x912fffff]
[ 0.373238] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.373240] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.373242] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.373244] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[ 0.373262] pci_bus 0000:00: on NUMA node 0
[ 0.373357] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.373452] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.373545] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.373636] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.373728] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.373819] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.373910] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.374002] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.374602] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.374741] ACPI : EC: interrupt unblocked
[ 0.374752] ACPI : EC: event unblocked
[ 0.374760] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.374762] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.374914] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.374916] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.374919] vgaarb: loaded
[ 0.374920] vgaarb: bridge control possible 0000:00:02.0
[ 0.375032] PCI: Using ACPI for IRQ routing
[ 0.387256] PCI: pci_cache_line_size set to 64 bytes
[ 0.387319] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.387321] e820: reserve RAM buffer [mem 0x7f4d2000-0x7fffffff]
[ 0.387323] e820: reserve RAM buffer [mem 0x7f534000-0x7fffffff]
[ 0.387325] e820: reserve RAM buffer [mem 0x7f5bb000-0x7fffffff]
[ 0.387326] e820: reserve RAM buffer [mem 0x7f67a000-0x7fffffff]
[ 0.387570] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.387577] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.387581] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.389035] clocksource: Switched to clocksource hpet
[ 0.398645] VFS: Disk quotas dquot_6.6.0
[ 0.398678] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.398815] pnp: PnP ACPI init
[ 0.468265] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1e.0 BAR 13 [io 0x1000-0x1fff]
[ 0.468333] system 00:00: [io 0x0600-0x060f] has been reserved
[ 0.468336] system 00:00: [io 0x0610] has been reserved
[ 0.468338] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.468340] system 00:00: [io 0x0810-0x0817] has been reserved
[ 0.468342] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.468345] system 00:00: [io 0x0500-0x053f] has been reserved
[ 0.468347] system 00:00: [io 0xff2c-0xff2f] has been reserved
[ 0.468350] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.468353] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.468355] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.468358] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.468360] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.468362] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.468364] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.468369] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.468433] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.468527] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.468576] pnp 00:03: Plug and Play ACPI device, IDs AUI0214 PNP0f13 (active)
[ 0.468666] pnp: PnP ACPI: found 4 devices
[ 0.468670] PnPBIOS: Disabled by ACPI PNP
[ 0.505580] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.505620] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.505625] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.505632] pci 0000:00:1c.0: bridge window [mem 0x91300000-0x923fffff]
[ 0.505636] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.505645] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.505648] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.505654] pci 0000:00:1e.0: bridge window [mem 0x91200000-0x912fffff]
[ 0.505667] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.505669] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.505671] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.505672] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.505674] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.505676] pci_bus 0000:01: resource 1 [mem 0x91300000-0x923fffff]
[ 0.505678] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.505680] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.505681] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
[ 0.505683] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 0.505685] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 0.505686] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.505688] pci_bus 0000:02: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.505797] NET: Registered protocol family 2
[ 0.506030] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.506049] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.506080] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.506115] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.506124] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.506188] NET: Registered protocol family 1
[ 0.506209] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.507848] PCI: CLS 0 bytes, default 64
[ 0.507921] Unpacking initramfs...
[ 0.942563] Freeing initrd memory: 16988K
[ 0.943211] audit: initializing netlink subsys (disabled)
[ 0.943246] audit: type=2000 audit(1509290519.940:1): initialized
[ 0.943711] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.943733] zbud: loaded
[ 0.944540] bounce: pool size: 64 pages
[ 0.944559] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.944593] io scheduler noop registered
[ 0.944594] io scheduler deadline registered
[ 0.944610] io scheduler cfq registered (default)
[ 0.945112] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.945120] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.945147] intel_idle: does not run on family 6 model 22
[ 0.945295] Monitor-Mwait will be used to enter C-1 state
[ 0.945302] Monitor-Mwait will be used to enter C-2 state
[ 0.945306] Monitor-Mwait will be used to enter C-3 state
[ 0.945310] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.945453] GHES: HEST is not enabled!
[ 0.945472] isapnp: Scanning for PnP cards...
[ 1.299684] isapnp: No Plug & Play device found
[ 1.299780] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.300399] Linux agpgart interface v0.103
[ 1.300723] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.333238] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.333246] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.333432] mousedev: PS/2 mouse device common for all mice
[ 1.335696] rtc_cmos 00:01: RTC can wake from S4
[ 1.335870] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.335904] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.335924] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.336339] NET: Registered protocol family 10
[ 1.336651] mip6: Mobile IPv6
[ 1.336654] NET: Registered protocol family 17
[ 1.336657] mpls_gso: MPLS GSO support
[ 1.336857] microcode: sig=0x10661, pf=0x80, revision=0x16
[ 1.336900] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.336904] Using IPI No-Shortcut mode
[ 1.337059] registered taskstats version 1
[ 1.337077] zswap: loaded using pool lzo/zbud
[ 1.337141] ima: No TPM chip found, activating TPM-bypass!
[ 1.337481] rtc_cmos 00:01: setting system clock to 2017-10-29 15:22:01 UTC (1509290521)
[ 1.337574] PM: Hibernation image not present or could not be loaded.
[ 1.337952] Freeing unused kernel memory: 752K
[ 1.338007] Write protecting the kernel text: 5828k
[ 1.338051] Write protecting the kernel read-only data: 1724k
[ 1.338052] NX-protecting the kernel data: 4412k
[ 1.338210] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.357980] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.358290] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.358962] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.360587] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.360698] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.361851] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.361876] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.361924] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.361935] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.361958] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.361972] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.436936] ACPI: bus type USB registered
[ 1.436973] usbcore: registered new interface driver usbfs
[ 1.436988] usbcore: registered new interface driver hub
[ 1.437018] usbcore: registered new device driver usb
[ 1.437727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.438161] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.440540] ehci-pci: EHCI PCI platform driver
[ 1.443581] SCSI subsystem initialized
[ 1.448677] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.448679] ACPI: Thermal Zone [TZ01] (63 C)
[ 1.449918] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.449922] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.450431] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.451233] 8139too 0000:02:01.0 eth0: RealTek RTL8139 at 0xf8214000, 00:1e:ec:18:51:92, IRQ 16
[ 1.454584] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.454595] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.454609] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.454646] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003080
[ 1.455517] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.455520] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.455522] usb usb1: Product: UHCI Host Controller
[ 1.455524] usb usb1: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.455525] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.455729] hub 1-0:1.0: USB hub found
[ 1.455738] hub 1-0:1.0: 2 ports detected
[ 1.456451] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.456459] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.456474] ehci-pci 0000:00:1d.7: debug port 1
[ 1.460394] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.464201] ehci-pci 0000:00:1d.7: irq 23, io mem 0x92404800
[ 1.465549] libata version 3.00 loaded.
[ 1.482114] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.482237] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.482240] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.482242] usb usb2: Product: EHCI Host Controller
[ 1.482243] usb usb2: Manufacturer: Linux 4.9.0-4-686-pae ehci_hcd
[ 1.482245] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.482434] hub 2-0:1.0: USB hub found
[ 1.482445] hub 2-0:1.0: 6 ports detected
[ 1.508163] hub 1-0:1.0: USB hub found
[ 1.510793] hub 1-0:1.0: 2 ports detected
[ 1.511309] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.511675] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.511684] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.511693] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.511725] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003060
[ 1.511843] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.511845] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.511847] usb usb3: Product: UHCI Host Controller
[ 1.511848] usb usb3: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.511850] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.512090] hub 3-0:1.0: USB hub found
[ 1.512114] hub 3-0:1.0: 2 ports detected
[ 1.512449] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.512456] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.512464] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.512488] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003040
[ 1.512563] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.512565] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.512567] usb usb4: Product: UHCI Host Controller
[ 1.512569] usb usb4: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.512570] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.512734] hub 4-0:1.0: USB hub found
[ 1.512742] hub 4-0:1.0: 2 ports detected
[ 1.512898] ahci 0000:00:1f.2: version 3.0
[ 1.513206] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.513236] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[ 1.513239] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
[ 1.523265] scsi host0: ahci
[ 1.529073] 8139too 0000:02:01.0 enp2s1: renamed from eth0
[ 1.534612] scsi host1: ahci
[ 1.547693] scsi host2: ahci
[ 1.547812] ata1: SATA max UDMA/133 abar m2048@0x92404000 port 0x92404100 irq 25
[ 1.547814] ata2: DUMMY
[ 1.547815] ata3: DUMMY
[ 1.547883] ata_piix 0000:00:1f.1: version 2.13
[ 1.549933] scsi host3: ata_piix
[ 1.550221] scsi host4: ata_piix
[ 1.550304] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
[ 1.550306] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
[ 1.740416] ata4.00: ATAPI: TSSTcorp CDDVDW TS-L632H, HS02, max MWDMA2
[ 1.764929] ata4.00: configured for MWDMA2
[ 1.808023] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.952063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3983e1ae5fa, max_idle_ns: 881590641957 ns
[ 1.957629] usb 2-1: New USB device found, idVendor=04b4, idProduct=6572
[ 1.957632] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.957633] usb 2-1: Product: USB2.0 Hub
[ 1.958366] hub 2-1:1.0: USB hub found
[ 1.958758] hub 2-1:1.0: 3 ports detected
[ 2.020509] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.021065] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.021070] ata1.00: ATA-8: FUJITSU MHY2120BH, 890B, max UDMA/100
[ 2.021072] ata1.00: 234441648 sectors, multi 16: LBA48
[ 2.021690] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.021695] ata1.00: configured for UDMA/100
[ 2.021910] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2120B 890B PQ: 0 ANSI: 5
[ 2.029840] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H HS02 PQ: 0 ANSI: 5
[ 2.048757] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 2.048820] sd 0:0:0:0: [sda] Write Protect is off
[ 2.048823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.048850] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.069842] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.069845] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.070361] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.080021] random: fast init done
[ 2.080040] usb 2-6: new high-speed USB device number 3 using ehci-pci
[ 2.114240] sda: sda1 sda2 < sda5 sda6 >
[ 2.115331] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.248027] usb 2-6: New USB device found, idVendor=04f2, idProduct=b057
[ 2.248030] usb 2-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.248032] usb 2-6: Product: CNF7041
[ 2.248033] usb 2-6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.248035] usb 2-6: SerialNumber: SN0001
[ 2.308073] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[ 2.421636] usb 2-1.2: New USB device found, idVendor=045e, idProduct=07b2
[ 2.421640] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.421642] usb 2-1.2: Product: Microsoft® 2.4GHz Transceiver v8.0
[ 2.421643] usb 2-1.2: Manufacturer: Microsoft
[ 2.425180] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.442345] usbcore: registered new interface driver usbhid
[ 2.442347] usbhid: USB HID core driver
[ 2.444764] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.0/0003:045E:07B2.0001/input/input3
[ 2.500043] usb 2-1.3: new full-speed USB device number 5 using ehci-pci
[ 2.504690] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:1d.7-1.2/input0
[ 2.506243] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.1/0003:045E:07B2.0002/input/input4
[ 2.506787] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:1d.7-1.2/input1
[ 2.518854] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.2/0003:045E:07B2.0003/input/input5
[ 2.576988] hid-generic 0003:045E:07B2.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:1d.7-1.2/input2
[ 2.610135] usb 2-1.3: New USB device found, idVendor=1e7d, idProduct=3232
[ 2.610139] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.610140] usb 2-1.3: Product: ROCCAT Ryos MK Pro
[ 2.610142] usb 2-1.3: Manufacturer: ROCCAT
[ 2.615270] input: ROCCAT ROCCAT Ryos MK Pro as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/0003:1E7D:3232.0004/input/input6
[ 2.672615] ryos 0003:1E7D:3232.0004: input,hidraw3: USB HID v1.11 Keyboard [ROCCAT ROCCAT Ryos MK Pro] on usb-0000:00:1d.7-1.3/input0
[ 2.705143] input: ROCCAT ROCCAT Ryos MK Pro as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.1/0003:1E7D:3232.0005/input/input7
[ 2.764727] ryos 0003:1E7D:3232.0005: input,hiddev0,hidraw4: USB HID v1.11 Pointer [ROCCAT ROCCAT Ryos MK Pro] on usb-0000:00:1d.7-1.3/input1
[ 2.805597] PM: Starting manual resume from disk
[ 2.805602] PM: Hibernation image partition 8:5 present
[ 2.805603] PM: Looking for hibernation image.
[ 2.805857] PM: Image not found (code -22)
[ 2.805858] PM: Hibernation image not present or could not be loaded.
[ 2.894117] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[ 3.013579] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.178535] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.298058] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 4.298213] systemd[1]: Detected architecture x86.
[ 4.308078] systemd[1]: Set hostname to <debianlt>.
[ 4.853135] random: crng init done
[ 5.366229] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.366361] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.366439] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.366538] systemd[1]: Listening on Syslog Socket.
[ 5.366601] systemd[1]: Listening on udev Kernel Socket.
[ 5.366678] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.366752] systemd[1]: Listening on udev Control Socket.
[ 6.088063] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 6.508154] systemd-journald[177]: Received request to flush runtime journal from PID 1
[ 7.225174] [drm] Initialized
[ 7.289043] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
[ 7.289050] ACPI: Power Button [PWRB]
[ 7.289171] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
[ 7.289192] ACPI: Lid Switch [LID0]
[ 7.289255] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
[ 7.289257] ACPI: Sleep Button [SLPB]
[ 7.289715] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
[ 7.289719] ACPI: Power Button [PWRF]
[ 7.493712] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.552207] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20160831/utaddress-247)
[ 7.552216] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000043B (\_SB.PCI0.LPC.PMA1) (20160831/utaddress-247)
[ 7.552221] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.552225] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000052D (\GPIO) (20160831/utaddress-247)
[ 7.552229] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.552267] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.570768] ACPI: Battery Slot [BAT0] (battery present)
[ 7.656150] ACPI: AC Adapter [AC] (on-line)
[ 7.683327] wmi: Mapper loaded
[ 7.730642] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[ 7.731157] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 7.731160] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.731162] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 7.731163] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 7.731165] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 7.731167] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1d
[ 7.731169] snd_hda_codec_conexant hdaudioC0D0: Mic=0x18
[ 7.731917] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 7.743031] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.743249] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.743302] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 7.761827] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.761884] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 8.102829] input: PC Speaker as /devices/platform/pcspkr/input/input15
[ 8.224147] pci 0000:00:00.0: Intel 965GM Chipset
[ 8.224173] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 8.224296] pci 0000:00:00.0: detected 8192K stolen memory
[ 8.224333] [drm] Memory usable by graphics device = 512M
[ 8.224336] [drm] Replacing VGA console driver
[ 8.225344] Console: switching to colour dummy device 80x25
[ 8.233470] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.233472] [drm] Driver supports precise vblank timestamp query.
[ 8.235870] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.278779] [drm] RC6 disabled, disabling runtime PM support
[ 8.278800] [drm] initialized overlay support
[ 8.279236] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 8.280387] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 8.287626] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 8.298143] acpi device:15: registered as cooling_device1
[ 8.298254] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 8.298467] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 8.394309] media: Linux media interface: v0.10
[ 8.442560] intel_powerclamp: No package C-state available
[ 8.457866] iTCO_vendor_support: vendor-support=0
[ 8.733051] Linux video capture interface: v2.00
[ 8.780403] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.780463] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 8.781093] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.822776] input: HP WMI hotkeys as /devices/virtual/input/input17
[ 8.857366] uvcvideo: Found UVC 1.00 device CNF7041 (04f2:b057)
[ 8.861253] uvcvideo 2-6:1.0: Entity type for entity Extension 5 was not initialized!
[ 8.861258] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[ 8.861260] uvcvideo 2-6:1.0: Entity type for entity Processing 3 was not initialized!
[ 8.861262] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[ 8.861396] input: CNF7041 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input18
[ 8.862155] usbcore: registered new interface driver uvcvideo
[ 8.862157] USB Video Class driver (1.1.1)
[ 9.006763] ath5k 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 9.006935] ath5k 0000:01:00.0: registered as 'phy0'
[ 9.540243] ath: EEPROM regdomain: 0x67
[ 9.540245] ath: EEPROM indicates we should expect a direct regpair map
[ 9.540247] ath: Country alpha2 being used: 00
[ 9.540248] ath: Regpair used: 0x67
[ 10.228106] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.228552] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 11.216135] ath5k 0000:01:00.0 wlp1s0: renamed from wlan0
[ 11.638373] Adding 2928636k swap on /dev/sda5. Priority:-1 extents:1 across:2928636k FS
[ 12.467629] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 17.106951] NET: Registered protocol family 4
[ 17.130174] NET: Registered protocol family 3
[ 17.148566] NET: Registered protocol family 5
[ 17.211908] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 18.656040] [drm:drm_atomic_helper_commit_cleanup_done [drm_kms_helper]] *ERROR* [CRTC:26:pipe A] flip_done timed out
[ 18.760026] ------------[ cut here ]------------
[ 18.760040] WARNING: CPU: 0 PID: 92 at /build/linux-Ou008s/linux-4.9.51/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x189/0x190 [drm]
[ 18.760041] vblank wait timed out on crtc 0
[ 18.760044] Modules linked in: appletalk ax25 ipx p8023 p8022 psnap llc arc4 ath5k uvcvideo videobuf2_vmalloc videobuf2_memops hp_wmi videobuf2_v4l2 iTCO_wdt videobuf2_core videodev sparse_keymap ath mac80211 iTCO_vendor_support media coretemp i915 serio_raw joydev evdev pcspkr cfg80211 rfkill sg snd_hda_codec_conexant snd_hda_codec_generic wmi snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep lpc_ich mfd_core ac shpchp battery video snd_pcm snd_timer snd soundcore button drm_kms_helper drm i2c_algo_bit ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb xts lrw gf128mul ablk_helper cryptd aes_i586 mbcache hid_roccat_ryos hid_roccat hid_roccat_common hid_generic usbhid hid sr_mod cdrom sd_mod ata_generic ata_piix ahci libahci psmouse 8139too 8139cp mii i2c_i801 i2c_smbus libata
[ 18.760098] scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common thermal
[ 18.760106] CPU: 0 PID: 92 Comm: kworker/u4:3 Not tainted 4.9.0-4-686-pae #1 Debian 4.9.51-1
[ 18.760107] Hardware name: Hewlett-Packard HP G7000 Notebook PC/30D9, BIOS F.31 02/29/2008
[ 18.760116] Workqueue: events_unbound async_run_entry_fn
[ 18.760118] f6d47bac ce2f2ad2 f6d47bc0 00000000 ce066d4a f87e3a54 f6d47be0 0000005c
[ 18.760123] f87e36a0 000004e6 f87bc529 000004e6 00000009 f87bc529 f6500000 00000000
[ 18.760127] 00000000 f6d47bcc ce066db6 00000009 00000000 f6d47bc0 f87e3a54 f6d47be0
[ 18.760131] Call Trace:
[ 18.760136] [<ce2f2ad2>] ? dump_stack+0x55/0x73
[ 18.760139] [<ce066d4a>] ? __warn+0xea/0x110
[ 18.760147] [<f87bc529>] ? drm_wait_one_vblank+0x189/0x190 [drm]
[ 18.760153] [<f87bc529>] ? drm_wait_one_vblank+0x189/0x190 [drm]
[ 18.760156] [<ce066db6>] ? warn_slowpath_fmt+0x46/0x60
[ 18.760162] [<f87bc529>] ? drm_wait_one_vblank+0x189/0x190 [drm]
[ 18.760166] [<ce0a8bc0>] ? prepare_to_wait_event+0xd0/0xd0
[ 18.760229] [<f8dfcc0a>] ? intel_get_load_detect_pipe+0x6fa/0x710 [i915]
[ 18.760270] [<f8e3a562>] ? intel_tv_detect+0x142/0x5e0 [i915]
[ 18.760279] [<f87c621e>] ? drm_for_each_detailed_block+0x2e/0x110 [drm]
[ 18.760285] [<f88120b0>] ? drm_helper_probe_single_connector_modes+0x3f0/0x500 [drm_kms_helper]
[ 18.760290] [<f882011a>] ? drm_fb_helper_initial_config+0x9a/0x410 [drm_kms_helper]
[ 18.760293] [<ce0a2f90>] ? pick_next_task_fair+0x490/0x520
[ 18.760332] [<f8e13a56>] ? intel_fbdev_initial_config+0x16/0x30 [i915]
[ 18.760334] [<ce087155>] ? async_run_entry_fn+0x35/0x170
[ 18.760337] [<ce07ee21>] ? process_one_work+0x141/0x380
[ 18.760339] [<ce07f0a1>] ? worker_thread+0x41/0x460
[ 18.760341] [<ce084314>] ? kthread+0xb4/0xd0
[ 18.760343] [<ce07f060>] ? process_one_work+0x380/0x380
[ 18.760345] [<ce084260>] ? kthread_park+0x50/0x50
[ 18.760347] [<ce5ae643>] ? ret_from_fork+0x1b/0x28
[ 18.760349] ---[ end trace 2a67807ce2538af1 ]---
[ 18.897091] ------------[ cut here ]------------
[ 18.897104] WARNING: CPU: 0 PID: 92 at /build/linux-Ou008s/linux-4.9.51/drivers/gpu/drm/drm_irq.c:1254 drm_wait_one_vblank+0x189/0x190 [drm]
[ 18.897105] vblank wait timed out on crtc 0
[ 18.897106] Modules linked in: appletalk ax25 ipx p8023 p8022 psnap llc arc4 ath5k uvcvideo videobuf2_vmalloc videobuf2_memops hp_wmi videobuf2_v4l2 iTCO_wdt videobuf2_core videodev sparse_keymap ath mac80211 iTCO_vendor_support media coretemp i915 serio_raw joydev evdev pcspkr cfg80211 rfkill sg snd_hda_codec_conexant snd_hda_codec_generic wmi snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep lpc_ich mfd_core ac shpchp battery video snd_pcm snd_timer snd soundcore button drm_kms_helper drm i2c_algo_bit ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb xts lrw gf128mul ablk_helper cryptd aes_i586 mbcache hid_roccat_ryos hid_roccat hid_roccat_common hid_generic usbhid hid sr_mod cdrom sd_mod ata_generic ata_piix ahci libahci psmouse 8139too 8139cp mii i2c_i801 i2c_smbus libata
[ 18.897157] scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common thermal
[ 18.897165] CPU: 0 PID: 92 Comm: kworker/u4:3 Tainted: G W 4.9.0-4-686-pae #1 Debian 4.9.51-1
[ 18.897166] Hardware name: Hewlett-Packard HP G7000 Notebook PC/30D9, BIOS F.31 02/29/2008
[ 18.897170] Workqueue: events_unbound async_run_entry_fn
[ 18.897172] f6d47b2c ce2f2ad2 f6d47b40 00000000 ce066d4a f87e3a54 f6d47b60 0000005c
[ 18.897176] f87e36a0 000004e6 f87bc529 000004e6 00000009 f87bc529 f6500000 00000000
[ 18.897180] 00000000 f6d47b4c ce066db6 00000009 00000000 f6d47b40 f87e3a54 f6d47b60
[ 18.897184] Call Trace:
[ 18.897188] [<ce2f2ad2>] ? dump_stack+0x55/0x73
[ 18.897192] [<ce066d4a>] ? __warn+0xea/0x110
[ 18.897199] [<f87bc529>] ? drm_wait_one_vblank+0x189/0x190 [drm]
[ 18.897206] [<f87bc529>] ? drm_wait_one_vblank+0x189/0x190 [drm]
[ 18.897208] [<ce066db6>] ? warn_slowpath_fmt+0x46/0x60
[ 18.897215] [<f87bc529>] ? drm_wait_one_vblank+0x189/0x190 [drm]
[ 18.897218] [<ce0a8bc0>] ? prepare_to_wait_event+0xd0/0xd0
[ 18.897269] [<f8df6712>] ? intel_pre_plane_update+0x122/0x140 [i915]
[ 18.897308] [<f8df6cf5>] ? intel_atomic_commit_tail+0x135/0xf40 [i915]
[ 18.897347] [<f8e08403>] ? intel_fbc_choose_crtc+0x23/0x1e0 [i915]
[ 18.897385] [<f8dff06a>] ? intel_prepare_plane_fb+0x12a/0x2a0 [i915]
[ 18.897391] [<f881934c>] ? drm_atomic_helper_swap_state+0x1cc/0x2d0 [drm_kms_helper]
[ 18.897429] [<f8df7e35>] ? intel_atomic_commit+0x335/0x4c0 [i915]
[ 18.897437] [<f87cf101>] ? drm_atomic_check_only+0x321/0x6a0 [drm]
[ 18.897475] [<f8dd0a60>] ? gen2_write16+0x120/0x120 [i915]
[ 18.897483] [<f87cf4c9>] ? drm_atomic_commit+0x49/0x50 [drm]
[ 18.897522] [<f8dfcc77>] ? intel_release_load_detect_pipe+0x57/0xa0 [i915]
[ 18.897562] [<f8e3a7bf>] ? intel_tv_detect+0x39f/0x5e0 [i915]
[ 18.897568] [<f88120b0>] ? drm_helper_probe_single_connector_modes+0x3f0/0x500 [drm_kms_helper]
[ 18.897572] [<f882011a>] ? drm_fb_helper_initial_config+0x9a/0x410 [drm_kms_helper]
[ 18.897576] [<ce0a2f90>] ? pick_next_task_fair+0x490/0x520
[ 18.897614] [<f8e13a56>] ? intel_fbdev_initial_config+0x16/0x30 [i915]
[ 18.897616] [<ce087155>] ? async_run_entry_fn+0x35/0x170
[ 18.897619] [<ce07ee21>] ? process_one_work+0x141/0x380
[ 18.897621] [<ce07f0a1>] ? worker_thread+0x41/0x460
[ 18.897623] [<ce084314>] ? kthread+0xb4/0xd0
[ 18.897625] [<ce07f060>] ? process_one_work+0x380/0x380
[ 18.897627] [<ce084260>] ? kthread_park+0x50/0x50
[ 18.897629] [<ce5ae643>] ? ret_from_fork+0x1b/0x28
[ 18.897631] ---[ end trace 2a67807ce2538af2 ]---
[ 18.959533] fbcon: inteldrmfb (fb0) is primary device
[ 19.723112] Console: switching to colour frame buffer device 160x48
[ 19.743929] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 23.062491] 8139too 0000:02:01.0 enp2s1: link down
[ 23.062595] IPv6: ADDRCONF(NETDEV_UP): enp2s1: link is not ready
[ 26.933656] fuse init (API version 7.26)
[ 34.808980] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 37.247004] 8139too 0000:02:01.0 enp2s1: link down
[ 37.247109] IPv6: ADDRCONF(NETDEV_UP): enp2s1: link is not ready
[ 37.701618] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 116.521316] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 116.596258] 8139too 0000:02:01.0 enp2s1: link down
[ 116.596423] IPv6: ADDRCONF(NETDEV_UP): enp2s1: link is not ready
[ 116.711145] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 117.757938] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 117.834726] 8139too 0000:02:01.0 enp2s1: link down
[ 117.834893] IPv6: ADDRCONF(NETDEV_UP): enp2s1: link is not ready
[ 190.661325] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 190.737696] 8139too 0000:02:01.0 enp2s1: link down
[ 190.737875] IPv6: ADDRCONF(NETDEV_UP): enp2s1: link is not ready
[ 327.075582] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 327.155075] 8139too 0000:02:01.0 enp2s1: link down
[ 327.155238] IPv6: ADDRCONF(NETDEV_UP): enp2s1: link is not ready
[ 327.315745] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 329.652447] wlp1s0: authenticate with 00:3a:7d:d1:1a:a0
[ 329.656967] wlp1s0: send auth to 00:3a:7d:d1:1a:a0 (try 1/3)
[ 329.657946] wlp1s0: authenticated
[ 329.660039] wlp1s0: associate with 00:3a:7d:d1:1a:a0 (try 1/3)
[ 329.664614] wlp1s0: RX AssocResp from 00:3a:7d:d1:1a:a0 (capab=0x431 status=0 aid=5)
[ 329.664713] wlp1s0: associated
[ 329.664753] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 329.706483] ath: EEPROM regdomain: 0x80d0
[ 329.706486] ath: EEPROM indicates we should expect a country code
[ 329.706487] ath: doing EEPROM country->regdmn map search
[ 329.706488] ath: country maps to regdmn code: 0x37
[ 329.706489] ath: Country alpha2 being used: DK
[ 329.706489] ath: Regpair used: 0x37
[ 329.706491] ath: regdomain 0x80d0 dynamically updated by country IE
[ 329.744894] wlp1s0: Limiting TX power to 7 dBm as advertised by 00:3a:7d:d1:1a:a0
[ 428.156486] perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 516.009279] perf: interrupt took too long (3164 > 3140), lowering kernel.perf_event_max_sample_rate to 63000
[ 571.648139] perf: interrupt took too long (3956 > 3955), lowering kernel.perf_event_max_sample_rate to 50500
[ 1050.235347] perf: interrupt took too long (4946 > 4945), lowering kernel.perf_event_max_sample_rate to 40250