bumblebee problem

Getting your soundcard to work, using Debian on non-i386 hardware, etc

bumblebee problem

Postby peiner » 2017-11-04 16:29

Hello everyone ! I have a notebook Dell Inspiron 15 with 2 graphic processors - Intel 5500 and GeForce 920M.I have Debian 9.2 on board and nonfree NVIDIA drivers.
I installed the package bumblebee and unfortunately it does not work properly. After issuing the command optirun glxgears -info, I got an error:

Code: Select all
[   54.886969] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:8:0:0.  Please

[   54.887012] [ERROR]Aborting because fallback start is disabled.


I noticed that bbswitch also does not start properly:

Code: Select all
[   18.081630] bbswitch: loading out-of-tree module taints kernel.
[   18.081867] bbswitch: version 0.8
[   18.081873] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   18.081880] bbswitch: Found discrete VGA device 0000:08:00.0: \_SB_.PCI0.RP05.D030
[   18.081890] bbswitch: failed to evaluate \_SB_.PCI0.RP05.D030._DSM {0xF8,0xD8,0x86,0xA4,0xDA,0x0B,0x1B,0x47,0xA7,0x2B,0x60,0x42,0xA6,0xB5,0xBE,0xE0} 0x100 0x0 {0x00,0x00,0x00,0x00}: AE_NOT_FOUND
[   18.081895] bbswitch: failed to evaluate \_SB_.PCI0.RP05.D030._DSM {0xA0,0xA0,0x95,0x9D,0x60,0x00,0x48,0x4D,0xB3,0x4D,0x7E,0x5F,0xEA,0x12,0x9F,0xD4} 0x102 0x0 {0x00,0x00,0x00,0x00}: AE_NOT_FOUND
[   18.081903] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   18.081963] bbswitch: No suitable _DSM call found.


This is my bumblebee.conf file:

Code: Select all
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau


And xorg,conf.nvidia

Code: Select all
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection



Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:08:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection

Section "Screen"
    Identifier "Default Screen"
    Device "DiscreteNvidia"
EndSection



What's wrong ?
User avatar
peiner
 
Posts: 3
Joined: 2017-11-04 16:12

Re: bumblebee problem

Postby stevepusser » 2017-11-04 23:14

Just installing "bumblebee" is not enough. Please look in the Debian wiki for the bumblebee setup procedure.
The MX Linux repositories: Backports galore! If we don't have something, just ask and we'll try--we like challenges. New packages: Krita 3.3.2.1, Pale Moon 27.6.0, Audacity 2.2.0, mpv 0.27.0, Corebird 1.7.1, Firefox 57.0, SMPlayer 17.11.2
User avatar
stevepusser
 
Posts: 8938
Joined: 2009-10-06 05:53

Re: bumblebee problem

Postby peiner » 2017-11-05 11:49

I did everything as it was described on the debian wiki.
User avatar
peiner
 
Posts: 3
Joined: 2017-11-04 16:12

Re: bumblebee problem

Postby nnm » 2017-11-06 06:45

Had the same problem: bbswitch-dkms does not work with the kernel in 9.2. Try the backports kernel.
Debian 9 (Stretch)
Asus Vivobook S551LB
nnm
 
Posts: 16
Joined: 2017-10-07 10:11
Location: /dev/zero

Re: bumblebee problem

Postby peiner » 2017-11-06 18:40

It works fine with kernel 4.13.0-0.bpo.1 . Thanks, the thread is suitable for closing.
User avatar
peiner
 
Posts: 3
Joined: 2017-11-04 16:12


Return to Hardware

Who is online

Users browsing this forum: No registered users and 4 guests

fashionable