My microphone works like an auricular!

Getting your soundcard to work, using Debian on non-i386 hardware, etc

My microphone works like an auricular!

Postby MMLPQTP » 2019-01-17 04:49

Hi there!

I have a microphone, it works fine, because I tried it in other devices, but in my computer it just works like an auricular.

I can hear music through the microphone!

I am using Debian 9 Stretch, so: Is there some way to revert the “auricular” function, and become it a microphone?

I have only one plug, so, maybe some hardware configuration is not OK.

Thanks!
MMLPQTP
 
Posts: 4
Joined: 2019-01-17 03:24

Re: My microphone works like an auricular!

Postby sunrat » 2019-01-17 07:43

A microphone is just like a speaker wired up backwards technically, although it won't work very well as such. If it's plugged in to the microphone input it's probably a software setting to change the jack socket from output to input. Or maybe it's not even designed to be an input. You didn't mention what your hardware is.
“ computer users can be divided into 2 categories:
Those who have lost data
...and those who have not lost data YET ”
Remember to BACKUP!
User avatar
sunrat
 
Posts: 2526
Joined: 2006-08-29 09:12
Location: Melbourne, Australia

Re: My microphone works like an auricular!

Postby Head_on_a_Stick » 2019-01-17 07:45

What does `dmesg` (or `journalctl`) say about the device?
User avatar
Head_on_a_Stick
 
Posts: 8900
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: My microphone works like an auricular!

Postby MMLPQTP » 2019-02-01 06:53

Yes. The thing is that I only have one plug. :? Same for microphone and headphones.

OK. I tried both commands. But there is a lot of information there (sensible, I see). What I am looking for? I don’t think is a good idea to show all my computer’s information :?

What should I share precisely? Any clue?
MMLPQTP
 
Posts: 4
Joined: 2019-01-17 03:24

Re: My microphone works like an auricular!

Postby Head_on_a_Stick » 2019-02-01 07:03

MMLPQTP wrote:What I am looking for?

Anything to do with the device in question, or anything relating to the audio stack.

I don't think posting dmesg output here is at all risky.
User avatar
Head_on_a_Stick
 
Posts: 8900
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: My microphone works like an auricular!

Postby MMLPQTP » 2019-02-01 07:26

Here, some information.

:~$ dmesg
Code: Select all
[feb 1 03:35] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[  +0,000005] software IO TLB [mem 0x748a6000-0x788a6000] (64MB) mapped at [ffff
[  +0,000812] audit: initializing netlink subsys (disabled)
[  +0,000036] audit: type=2000 audit(1549002951.791:1): initialized
[  +0,000729] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[  +0,000051] zbud: loaded
[  +0,001694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 25
[  +0,000074] io scheduler noop registered
[  +0,000001] io scheduler deadline registered
[  +0,000024] io scheduler cfq registered (default)
[  +0,000872] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  +0,000011] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[  +0,000040] intel_idle: MWAIT substates: 0x33000020
[  +0,000002] intel_idle: v0.4.1 model 0x37
[  +0,000173] intel_idle: lapic_timer_reliable_states 0xffffffff
[  +0,002556] GHES: HEST is not enabled!
[  +0,000137] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[  +0,020232] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550
[  +0,001157] hpet: number irqs doesn't agree with number of timers
[  +0,000050] Linux agpgart interface v0.103
[  +0,000137] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[  +0,000002] AMD IOMMUv2 functionality not available on this system
[  +0,000418] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x
:...skipping...
[feb 1 03:35] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[  +0,000005] software IO TLB [mem 0x748a6000-0x788a6000] (64MB) mapped at [ffff8addf48a6000-ffff8addf88a5fff]
[  +0,000812] audit: initializing netlink subsys (disabled)
[  +0,000036] audit: type=2000 audit(1549002951.791:1): initialized
[  +0,000729] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[  +0,000051] zbud: loaded
[  +0,001694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[  +0,000074] io scheduler noop registered
[  +0,000001] io scheduler deadline registered
[  +0,000024] io scheduler cfq registered (default)
[  +0,000872] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  +0,000011] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[  +0,000040] intel_idle: MWAIT substates: 0x33000020
[  +0,000002] intel_idle: v0.4.1 model 0x37
[  +0,000173] intel_idle: lapic_timer_reliable_states 0xffffffff
[  +0,002556] GHES: HEST is not enabled!
[  +0,000137] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[  +0,020232] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[  +0,001157] hpet: number irqs doesn't agree with number of timers
[  +0,000050] Linux agpgart interface v0.103
[  +0,000137] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[  +0,000002] AMD IOMMUv2 functionality not available on this system
[  +0,000418] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[  +0,012295] serio: i8042 KBD port at 0x60,0x64 irq 1
[  +0,000009] serio: i8042 AUX port at 0x60,0x64 irq 12
[  +0,000610] mousedev: PS/2 mouse device common for all mice
[  +0,000099] rtc_cmos 00:00: RTC can wake from S4
[  +0,000236] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[  +0,000030] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[  +0,000016] intel_pstate: Intel P-state driver initializing
[  +0,000524] ledtrig-cpu: registered to indicate activity on CPUs
[  +0,002574] NET: Registered protocol family 10
[  +0,001858] mip6: Mobile IPv6
[  +0,000012] NET: Registered protocol family 17
[  +0,000019] mpls_gso: MPLS GSO support
[  +0,001380] microcode: sig=0x30678, pf=0x8, revision=0x829
[  +0,000629] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[  +0,002153] registered taskstats version 1
[  +0,000082] zswap: loaded using pool lzo/zbud
[  +0,000572] ima: No TPM chip found, activating TPM-bypass!
[  +0,000013] ima: Allocated hash algorithm: sha256
[  +0,001581] rtc_cmos 00:00: setting system clock to 2019-02-01 06:35:52 UTC (1549002952)
[  +0,000226] PM: Hibernation image not present or could not be loaded.
[  +0,000610] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[  +0,004816] Freeing unused kernel memory: 1420K
[  +0,000003] Write protecting the kernel read-only data: 12288k
[  +0,001366] Freeing unused kernel memory: 1908K
[  +0,005077] Freeing unused kernel memory: 1224K
[  +0,008295] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[  +0,039384] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[  +0,000284] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[  +0,000039] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[  +0,072146] hidraw: raw HID events driver (C) Jiri Kosina
[  +0,029016] thermal LNXTHERM:00: registered as thermal_zone0
[  +0,000002] ACPI: Thermal Zone [TZ00] (36 C)
[  +0,000606] thermal LNXTHERM:01: registered as thermal_zone1
[  +0,000002] ACPI: Thermal Zone [TZ01] (41 C)
[  +0,000166] thermal LNXTHERM:02: registered as thermal_zone2
[  +0,000002] ACPI: Thermal Zone [TZ02] (28 C)
[  +0,003917] SCSI subsystem initialized
[  +0,004226] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 87
[  +0,001540] ACPI: bus type USB registered
[  +0,000042] usbcore: registered new interface driver usbfs
[  +0,000018] usbcore: registered new interface driver hub
[  +0,000047] usbcore: registered new device driver usb
[  +0,001726] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[  +0,000017] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[  +0,000185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  +0,000320] ehci-pci: EHCI PCI platform driver
[  +0,000163] r8169 0000:04:00.0 eth0: RTL8106e at 0xffffa36ac06dd000, 30:8d:99:25:d6:11, XID 04900000 IRQ 88
[  +0,000037] ehci-pci 0000:00:1d.0: EHCI Host Controller
[  +0,000010] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[  +0,000020] ehci-pci 0000:00:1d.0: debug port 2
[  +0,003928] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[  +0,000066] libata version 3.00 loaded.
[  +0,001070] ehci-pci 0000:00:1d.0: irq 23, io mem 0x90a18000
[  +0,013836] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[  +0,000195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  +0,000003] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000002] usb usb1: Product: EHCI Host Controller
[  +0,000002] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
[  +0,000001] usb usb1: SerialNumber: 0000:00:1d.0
[  +0,000247] hub 1-0:1.0: USB hub found
[  +0,000016] hub 1-0:1.0: 8 ports detected
[  +0,000809] xhci_hcd 0000:00:14.0: xHCI Host Controller
[  +0,000011] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[  +0,006456] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[  +0,000008] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[  +0,022569] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[  +0,000003] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000002] usb usb2: Product: xHCI Host Controller
[  +0,000002] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
[  +0,000001] usb usb2: SerialNumber: 0000:00:14.0
[  +0,001218] hub 2-0:1.0: USB hub found
[  +0,000353] hub 2-0:1.0: 6 ports detected
[  +0,001018] xhci_hcd 0000:00:14.0: xHCI Host Controller
[  +0,000008] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[  +0,000081] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[  +0,000002] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000002] usb usb3: Product: xHCI Host Controller
[  +0,000002] usb usb3: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
[  +0,000001] usb usb3: SerialNumber: 0000:00:14.0
[  +0,006220] r8169 0000:04:00.0 enp4s0: renamed from eth0
[  +0,004317] hub 3-0:1.0: USB hub found
[  +0,000022] hub 3-0:1.0: 1 port detected
[  +0,000577] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[  +0,077026] ahci 0000:00:13.0: version 3.0
[  +0,000150] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[  +0,010617] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[  +0,000020] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso
[  +0,001110] scsi host0: ahci
[  +0,000374] scsi host1: ahci
[  +0,000184] ata1: SATA max UDMA/133 abar m2048@0x90a1f000 port 0x90a1f100 irq 90
[  +0,000004] ata2: SATA max UDMA/133 abar m2048@0x90a1f000 port 0x90a1f180 irq 90
[  +0,194960] usb 1-1: new high-speed USB device number 2 using ehci-pci
[  +0,031965] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[  +0,087116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  +0,005226] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  +0,005549] ata2.00: ATAPI: hp       DVDRW  SU208GB, HH00, max UDMA/100
[  +0,007971] ata1.00: ATA-8: ST500LT012-1DG142, 1003YAM1, max UDMA/133
[  +0,000013] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[  +0,003153] ata2.00: configured for UDMA/100
[  +0,008257] usb 1-1: New USB device found, idVendor=8087, idProduct=07e6
[  +0,000014] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  +0,001323] hub 1-1:1.0: USB hub found
[  +0,000231] hub 1-1:1.0: 4 ports detected
[  +0,021068] ata1.00: configured for UDMA/133
[  +0,000701] scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-1DG14 YAM1 PQ: 0 ANSI: 5
[  +0,004918] usb 2-1: New USB device found, idVendor=0bda, idProduct=8179
[  +0,000008] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  +0,000004] usb 2-1: Product: 802.11n NIC
[  +0,000005] usb 2-1: Manufacturer: Realtek
[  +0,000004] usb 2-1: SerialNumber: 00E04C0001
[  +0,042551] scsi 1:0:0:0: CD-ROM            hp       DVDRW  SU208GB   HH00 PQ: 0 ANSI: 5
[  +0,027041] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[  +0,000005] sd 0:0:0:0: [sda] 4096-byte physical blocks
[  +0,000139] sd 0:0:0:0: [sda] Write Protect is off
[  +0,000004] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  +0,000052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  +0,018410] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[  +0,000005] cdrom: Uniform CD-ROM driver Revision: 3.20
[  +0,000733] sr 1:0:0:0: Attached scsi CD-ROM sr0
[  +0,037388] usb 2-3: new high-speed USB device number 3 using xhci_hcd
[  +0,115408]  sda: sda1 < sda5 sda6 sda7 sda8 sda9 > sda3
               sda3: <openbsd: sda10 sda11 sda12 sda13bad subpartition - ignored
              bad subpartition - ignored
              bad subpartition - ignored
              bad subpartition - ignored
              bad subpartition - ignored
               >
[  +0,007052] sd 0:0:0:0: [sda] Attached SCSI disk
[  +0,005541] tsc: Refined TSC clocksource calibration: 2166.666 MHz
[  +0,000018] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f3b3172f25, max_idle_ns: 440795274731 ns
[  +0,016574] usb 2-3: New USB device found, idVendor=1a40, idProduct=0101
[  +0,000004] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  +0,000002] usb 2-3: Product: USB 2.0 Hub
[  +0,000656] hub 2-3:1.0: USB hub found
[  +0,000045] hub 2-3:1.0: 4 ports detected
[  +0,000425] usb: port power management may be unreliable
[  +0,023285] random: fast init done
[  +0,094943] usb 2-4: new high-speed USB device number 4 using xhci_hcd
[  +0,207246] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[  +0,012805] usb 2-4: New USB device found, idVendor=04f2, idProduct=b40e
[  +0,000004] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[  +0,000003] usb 2-4: Product: HP Truevision HD
[  +0,000002] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd.
[  +0,664671] clocksource: Switched to clocksource tsc
[  +0,477424] device-mapper: uevent: version 1.0.3
[  +0,000566] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[  +0,166784] PM: Starting manual resume from disk
[  +0,000006] PM: Hibernation image partition 8:5 present
[  +0,000001] PM: Looking for hibernation image.
[  +0,000241] PM: Image not found (code -22)
[  +0,000001] PM: Hibernation image not present or could not be loaded.
[  +0,378321] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[  +0,825022] random: crng init done
[  +0,000008] random: 7 urandom warning(s) missed due to ratelimiting
[  +0,354705] ip_tables: (C) 2000-2006 Netfilter Core Team
[  +0,120055] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETU
[  +0,000420] systemd[1]: Detected architecture x86-64.
[  +0,009131] systemd[1]: Set hostname to <equi>.
[  +1,454337] systemd[1]: rsync.service: Cannot add dependency job, ignoring: Unit rsync.service is masked.
[  +0,000126] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
[  +0,000054] systemd[1]: clamav-freshclam.service: Cannot add dependency job, ignoring: Unit clamav-freshclam.service is masked.
[  +0,002010] systemd[1]: Listening on Journal Socket (/dev/log).
[  +0,000390] systemd[1]: Listening on udev Kernel Socket.
[  +0,000194] systemd[1]: Listening on udev Control Socket.
[  +0,000701] systemd[1]: Created slice System Slice.
[  +0,394589] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[  +0,222128] systemd-journald[195]: Received request to flush runtime journal from PID 1
[  +0,853817] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[  +0,000007] ACPI: Power Button [PWRB]
[  +0,000167] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[  +0,000035] ACPI: Lid Switch [LID0]
[  +0,000080] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[  +0,000004] ACPI: Power Button [PWRF]
[  +0,047354] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  +0,006758] Initializing HPQ6001 module
[  +0,000126] input: HP Wireless hotkeys as /devices/virtual/input/input6
[  +0,050975] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[  +0,044922] Bluetooth: Core ver 2.22
[  +0,000026] NET: Registered protocol family 31
[  +0,000001] Bluetooth: HCI device and connection manager initialized
[  +0,000006] Bluetooth: HCI socket layer initialized
[  +0,000004] Bluetooth: L2CAP socket layer initialized
[  +0,000008] Bluetooth: SCO socket layer initialized
[  +0,029868] [drm] Initialized
[  +0,077430] [drm] Memory usable by graphics device = 2048M
[  +0,000004] [drm] Replacing VGA console driver
[  +0,000811] Console: switching to colour dummy device 80x25
[  +0,000156] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[  +0,000001] [drm] Driver supports precise vblank timestamp query.
[  +0,000495] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[  +0,016088] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[  +0,002020] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[  +0,000083] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[  +0,025738] fbcon: inteldrmfb (fb0) is primary device
[  +0,030271] wmi: Mapper loaded
[  +0,020321] Bluetooth: HCI UART driver ver 2.3
[  +0,000001] Bluetooth: HCI UART protocol H4 registered
[  +0,000001] Bluetooth: HCI UART protocol BCSP registered
[  +0,000001] Bluetooth: HCI UART protocol LL registered
[  +0,000001] Bluetooth: HCI UART protocol ATH3K registered
[  +0,000052] Bluetooth: HCI UART protocol Intel registered
[  +0,000022] Bluetooth: HCI UART protocol Broadcom registered
[  +0,000001] Bluetooth: HCI UART protocol QCA registered
[  +0,000001] Bluetooth: HCI UART protocol AG6XX registered
[  +0,000000] Bluetooth: HCI UART protocol Marvell registered
[  +0,030976] ACPI: Battery Slot [BAT1] (battery absent)
[  +0,057376] ACPI: AC Adapter [ACAD] (on-line)
[  +0,041036] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  +0,000073] sr 1:0:0:0: Attached scsi generic sg1 type 5
[feb 1 03:36] Console: switching to colour frame buffer device 170x48
[  +0,027392] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[  +0,000097] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[  +0,334622] input: PC Speaker as /devices/platform/pcspkr/input/input8
[  +0,005571] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[  +0,010672] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[  +0,283264] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  +0,023014] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[  +0,000004] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  +0,000002] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[  +0,000002] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[  +0,000001] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[  +0,000003] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[  +0,000002] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[  +0,307423] intel_soc_dts_thermal: request_threaded_irq ret -22
[  +0,039147] intel_soc_dts_thermal: request_threaded_irq ret -22
[  +0,009851] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[  +0,000118] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[  +0,000106] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[  +0,043078] iTCO_vendor_support: vendor-support=0
[  +0,002427] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[  +0,000077] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[  +0,000553] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  +0,027839] intel_rapl: Found RAPL domain package
[  +0,000007] intel_rapl: Found RAPL domain core
[  +0,033616] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[  +0,003851] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[  +0,022545] usbcore: registered new interface driver r8188eu
[  +0,014628] media: Linux media interface: v0.10
[  +0,341937] input: HP WMI hotkeys as /devices/virtual/input/input11
[  +0,122750] Adding 6054908k swap on /dev/sda5.  Priority:-1 extents:1 across:6054908k FS
[  +0,067572] Linux video capture interface: v2.00
[  +0,485764] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b40e)
[  +0,040043] uvcvideo 2-4:1.0: Entity type for entity Extension 3 was not initialized!
[  +0,000019] uvcvideo 2-4:1.0: Entity type for entity Processing 2 was not initialized!
[  +0,000012] uvcvideo 2-4:1.0: Entity type for entity Camera 1 was not initialized!
[  +0,002093] input: HP Truevision HD as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input13
[  +0,000419] usbcore: registered new interface driver uvcvideo
[  +0,000006] USB Video Class driver (1.1.1)
[  +0,130834] rt2800pci 0000:02:00.0 wlp2s0f0: renamed from wlan0
[  +0,425433] r8188eu 2-1:1.0 wlxec086b16512b: renamed from wlan1
[  +0,473266] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[  +5,184628] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[  +0,061311] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8106e-1.fw
[  +0,211774] r8169 0000:04:00.0 enp4s0: link down
[  +0,000129] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[  +0,024097] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[  +0,000117] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[  +0,000033] rt2800pci 0000:02:00.0: firmware: failed to load rt3290.bin (-2)
[  +0,000074] rt2800pci 0000:02:00.0: Direct firmware load for rt3290.bin failed with error -2
[  +0,008642] IPv6: ADDRCONF(NETDEV_UP): wlxec086b16512b: link is not ready
[  +0,044492] r8188eu 2-1:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  +0,390655] MAC Address = ec:08:6b:16:51:2b
[  +0,001370] IPv6: ADDRCONF(NETDEV_UP): wlxec086b16512b: link is not ready
[  +0,003012] R8188EU: indicate disassoc
[  +0,140694] IPv6: ADDRCONF(NETDEV_CHANGE): wlxec086b16512b: link becomes ready
[feb 1 03:48] FAT-fs (sda9): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[feb 1 04:00] R8188EU: ap recv disassoc reason code(7) sta:60:e3:27:82:71:82
[  +0,002855] R8188EU: indicate disassoc
[  +0,027711] R8188EU: ap recv disassoc reason code(7) sta:60:e3:27:82:71:82
[  +1,524454] R8188EU: assoc success
[feb 1 04:03] perf: interrupt took too long (2531 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[feb 1 04:08] perf: interrupt took too long (3183 > 3163), lowering kernel.perf_event_max_sample_rate to 62750
[feb 1 04:17] perf: interrupt took too long (3985 > 3978), lowering kernel.perf_event_max_sample_rate to 50000
[feb 1 05:00] perf: interrupt took too long (4990 > 4981), lowering kernel.perf_event_max_sample_rate to 40000
(END)
MMLPQTP
 
Posts: 4
Joined: 2019-01-17 03:24

Re: My microphone works like an auricular!

Postby Head_on_a_Stick » 2019-02-01 19:35

Apologies, I should have told you to open a terminal and run this command:
Code: Select all
dmesg -w

Or
Code: Select all
journalctl -f

And then plug the device and post whatever new messages appear.
User avatar
Head_on_a_Stick
 
Posts: 8900
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: My microphone works like an auricular!

Postby MMLPQTP » 2019-02-20 12:12

Hi!

Hey, look. When I try that commands, I can see the end of the information, on the Terminal, but not the beginning. So I can't paste that in here. It will be useless, because it will be incomplete.

Do you know how to have all that, complete, to be pasted?

Sorry for the inconvenience.
MMLPQTP
 
Posts: 4
Joined: 2019-01-17 03:24

Re: My microphone works like an auricular!

Postby GarryRicketson » 2019-02-20 14:19

You should be able to print the output to a file, the file will it all, then you can either copy/paste the contents to here, or upload it to a storage site , like pastebin. You will not be able to attach the file to a post, the forum software does not permit that.
Below a example:
Code: Select all
dmesg -w > /home/me/dmesg.txt

Will print everything in the output, to a file named dmesg.txt, and it will be in the
directory /home/me
Where I used "me", would be the username , for example you, ..
IF you do not specify a directory for the out put, the file will be in the same directory the command was executed in.
User avatar
GarryRicketson
 
Posts: 5300
Joined: 2015-01-20 22:16
Location: Durango, Mexico

Re: My microphone works like an auricular!

Postby Head_on_a_Stick » 2019-02-20 19:08

MMLPQTP wrote:I can see the end of the information, on the Terminal, but not the beginning

See viewtopic.php?p=692623#p692623

Not sure why this is such a difficult concept for people to understand...
User avatar
Head_on_a_Stick
 
Posts: 8900
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: My microphone works like an auricular!

Postby GarryRicketson » 2019-02-20 19:30

Do you not understand what I mean by "new lines"? :?

I will try again: unplug the device, run `dmesg -w` then completely ignore the text that appears, then plug the device in again and only read any new text that appears, it will only be a few lines long.

You really shoul read the man page section about the -w option, I could be telling you to destroy your machine for all you know :roll:

I understand what you are saying here, but when I looked at 'man dmesg', it does not show a -w option, ?
Code: Select all
garry% dmesg -w
dmesg: unknown option -- w
usage: dmesg [-s] [-M core] [-N system]
 

But also mine is not a Debian system, so any way, not really sure if the instruction on how to print the output to a file would apply, or work using the linux -w option, but it still is a good way to get all of the info when the output is so long it fills the screen, goes on to more, only so much can fit on the screen,...
I do understand though, what you are saying, and when the OP plugs in the device, after they have unplugged it, there should be some new lines that appear in the dmesg -w out put, so those would be on the screen, they would be the most recent and last few lines.
Seems pretty clear to me.
User avatar
GarryRicketson
 
Posts: 5300
Joined: 2015-01-20 22:16
Location: Durango, Mexico

Re: My microphone works like an auricular!

Postby GarryRicketson » 2019-02-20 19:47

Code: Select all
sd1 at scsibus4 targ 1 lun 0: <ADATA, USB Flash Drive, 1100> SCSI2 0/direct removable serial.125fcb100203500203E3
sd1: 14800MB, 512 bytes/sector, 30310400 sectors

On my system, I all ways have Xconsole open, and it shows the changes there, no need to run dmesg, but any way I did capture the changes, using the print output method, explained earlier, these are the new lines,
Code: Select all
sd1 at scsibus4 targ 1 lun 0: <ADATA, USB Flash Drive, 1100> SCSI2 0/direct removable serial.125fcb100203500203E3
sd1: 14800MB, 512 bytes/sector, 30310400 sectors
sd1 detached
scsibus4 detached
umass0 detached

And when I plug it in again it repeats, what is shown above,
Code: Select all
sd1 at scsibus4 targ 1 lun 0: <ADATA, USB Flash Drive, 1100> SCSI2 0/direct removable serial.125fcb100203500203E3
sd1: 14800MB, 512 bytes/sector, 30310400 sectors 

Same as in the xconsole window,..
==== edited ===
Apologize, if this seems off topic, and not related to the OP's problem directly, but it is intended to try to help clarify, what HOAS is trying to say, and the OP said:
Postby MMLPQTP » 2019-02-20 07:12
Hi!

Hey, look. When I try that commands, I can see the end of the information, on the Terminal, but not the beginning.

That is the point, the information at the beginning is not relevant, it is the LAST (most recent) LINES (the text that is at the bottom, and end of the out put) not at the beginning. Have a good dayeveryone :D
User avatar
GarryRicketson
 
Posts: 5300
Joined: 2015-01-20 22:16
Location: Durango, Mexico


Return to Hardware

Who is online

Users browsing this forum: No registered users and 5 guests

fashionable