No Sound after boot [SOLVED]

Getting your soundcard to work, using Debian on non-i386 hardware, etc

No Sound after boot [SOLVED]

Postby outzen » 2020-03-29 09:24

When starting up there is No Sound. After using the following command
rm -r ~/.config/pulse
everything works fine (pc speaker and headphones to audio output when activating mp3 file).
However upon reboot im back to square one - i.e. no sound.

Setup:
PC: HP Elitebook
OS: Raspbian (Debian GNU/Linux 8.8 Jessie)
(correction: os is Debian GNU/Linux 8.8 Jessie - Raspbian is the desktop theme)

Command: dmesg|grep sound
Code: Select all
[    6.178573] sound hdaudioC1D0: autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[    6.178578] sound hdaudioC1D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    6.178581] sound hdaudioC1D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    6.178583] sound hdaudioC1D0:    mono: mono_out=0x0
[    6.178585] sound hdaudioC1D0:    inputs:
[    6.178588] sound hdaudioC1D0:      Mic=0xc
[    6.178591] sound hdaudioC1D0:      Internal Mic=0x11
[    6.178594] sound hdaudioC1D0:      Line=0xf
[    6.207934] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    6.208023] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    6.208101] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    6.231291] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input15
[    6.231509] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    6.232117] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[    6.232209] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[    6.232815] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22


Command: aplay -l
Code: Select all
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: 92HD91BXX Analog [92HD91BXX Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


command: lsmod|grep snd
Code: Select all
snd_hda_codec_hdmi     44414  2
snd_hda_codec_idt      48266  1
snd_hda_codec_generic    58021  1 snd_hda_codec_idt
snd_hda_intel          26023  1
snd_hda_controller     26262  1 snd_hda_intel
snd_hda_codec          93797  5 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep              12906  1 snd_hda_codec
snd_pcm                78128  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer              26149  1 snd_pcm
snd                    55101  10 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
soundcore              12890  2 snd,snd_hda_codec
Last edited by outzen on 2020-03-29 17:40, edited 3 times in total.
outzen
 
Posts: 19
Joined: 2020-03-29 07:44

Re: No Sound after boot

Postby Head_on_a_Stick » 2020-03-29 09:47

outzen wrote:OS: Raspbian

That is not supported here, please ask over at https://www.raspbian.org/RaspbianForums instead.
Black Lives Matter

Debian buster-backports ISO image: for new hardware support
User avatar
Head_on_a_Stick
 
Posts: 12647
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: No Sound after boot

Postby outzen » 2020-03-29 11:40

OK, as you have maybee guessed im not an experienced linux user, so im not sure how to interpret your answer :-)
Debian 8 is the base linux distribution on this system - the raspbian is the desktop theme that I installed after debian.
Are you saying, when googling for solutions that I should look for Raspbian instead of debian 8? :-)
outzen
 
Posts: 19
Joined: 2020-03-29 07:44

Re: No Sound after boot

Postby Head_on_a_Stick » 2020-03-29 11:57

outzen wrote:Debian 8 is the base linux distribution on this system - the raspbian is the desktop theme that I installed after debian.

Ah, right, I think I understand now. I've never seen "Raspbian" used to describe a desktop theme.

Is your posted output from when you were suffering the problem? A before-and-after comparison would be useful.

Please also show the output of this command both while suffering with the problem and when the problem is fixed:
Code: Select all
pacmd list-sinks

Please use code tags when posting terminal output, go back and edit your OP to include them. They will make the thread *much* more readable.
Black Lives Matter

Debian buster-backports ISO image: for new hardware support
User avatar
Head_on_a_Stick
 
Posts: 12647
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: No Sound after boot

Postby outzen » 2020-03-29 12:32

OK, kan see that I should not refer to raspbian as part of the os - will be more precise next time :-)

*************************************************
Output after a fresh reboot;
Command: pacmd list-sinks
output: No PulseAudio deamon running, or not running as sessions deamon

command: dmesg|grep sound
Code: Select all
[    5.916842] sound hdaudioC1D0: autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[    5.916846] sound hdaudioC1D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    5.916849] sound hdaudioC1D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    5.916851] sound hdaudioC1D0:    mono: mono_out=0x0
[    5.916853] sound hdaudioC1D0:    inputs:
[    5.916856] sound hdaudioC1D0:      Mic=0xc
[    5.916859] sound hdaudioC1D0:      Internal Mic=0x11
[    5.916861] sound hdaudioC1D0:      Line=0xf
[    5.950625] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    5.950713] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    5.950797] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    5.974208] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input21
[    5.974420] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
[    5.974501] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24
[    5.974579] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25
[    5.974657] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input26


command: aplay -l
Code: Select all
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: 92HD91BXX Analog [92HD91BXX Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


command: lsmod|grep snd
Code: Select all
snd_hda_codec_hdmi     44414  2
snd_hda_codec_idt      48266  1
snd_hda_codec_generic    58021  1 snd_hda_codec_idt
snd_hda_intel          26023  1
snd_hda_controller     26262  1 snd_hda_intel
snd_hda_codec          93797  5 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep              12906  1 snd_hda_codec
snd_pcm                78128  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer              26149  1 snd_pcm
snd                    55101  10 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
soundcore              12890  2 snd,snd_hda_codec


******************************
After applying the " rm -r ~/.config/pulse " fix

Command: pacmd list-sinks
Code: Select all
1 sink(s) available.
  * index: 0
   name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
   driver: <module-alsa-card.c>
   flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
   state: SUSPENDED
   suspend cause: IDLE
   priority: 9959
   volume: front-left: 31008 /  47% / -19.50 dB,   front-right: 31008 /  47% / -19.50 dB
           balance 0.00
   base volume: 65536 / 100% / 0.00 dB
   volume steps: 65537
   muted: no
   current latency: 0.00 ms
   max request: 0 KiB
   max rewind: 0 KiB
   monitor source: 0
   sample spec: s16le 2ch 44100Hz
   channel map: front-left,front-right
                Stereo
   used by: 0
   linked by: 0
   configured latency: 0.00 ms; range is 0.50 .. 371.52 ms
   card: 1 <alsa_card.pci-0000_00_1b.0>
   module: 7
   properties:
      alsa.resolution_bits = "16"
      device.api = "alsa"
      device.class = "sound"
      alsa.class = "generic"
      alsa.subclass = "generic-mix"
      alsa.name = "92HD91BXX Analog"
      alsa.id = "92HD91BXX Analog"
      alsa.subdevice = "0"
      alsa.subdevice_name = "subdevice #0"
      alsa.device = "0"
      alsa.card = "1"
      alsa.card_name = "HDA Intel PCH"
      alsa.long_card_name = "HDA Intel PCH at 0xd0734000 irq 65"
      alsa.driver_name = "snd_hda_intel"
      device.bus_path = "pci-0000:00:1b.0"
      sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
      device.bus = "pci"
      device.vendor.id = "8086"
      device.vendor.name = "Intel Corporation"
      device.product.id = "9c20"
      device.product.name = "8 Series HD Audio Controller"
      device.form_factor = "internal"
      device.string = "front:1"
      device.buffering.buffer_size = "65536"
      device.buffering.fragment_size = "32768"
      device.access_mode = "mmap+timer"
      device.profile.name = "analog-stereo"
      device.profile.description = "Analog Stereo"
      device.description = "Built-in Audio Analog Stereo"
      alsa.mixer_name = "IDT 92HD91BXX"
      alsa.components = "HDA:111d76e0,103c1991,00100303"
      module-udev-detect.discovered = "1"
      device.icon_name = "audio-card-pci"
   ports:
      analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: no)
         properties:
            
      analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
         properties:
            device.icon_name = "audio-speakers"
      analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
         properties:
            device.icon_name = "audio-headphones"
   active port: <analog-output-speaker>


command: dmesg|grep sound
Code: Select all
[    5.916842] sound hdaudioC1D0: autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[    5.916846] sound hdaudioC1D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    5.916849] sound hdaudioC1D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    5.916851] sound hdaudioC1D0:    mono: mono_out=0x0
[    5.916853] sound hdaudioC1D0:    inputs:
[    5.916856] sound hdaudioC1D0:      Mic=0xc
[    5.916859] sound hdaudioC1D0:      Internal Mic=0x11
[    5.916861] sound hdaudioC1D0:      Line=0xf
[    5.950625] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    5.950713] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    5.950797] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    5.974208] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input21
[    5.974420] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
[    5.974501] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24
[    5.974579] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25
[    5.974657] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input26


command: aplay -l
Code: Select all
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: 92HD91BXX Analog [92HD91BXX Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


command: lsmod|grep snd
Code: Select all
snd_hda_codec_hdmi     44414  2
snd_hda_codec_idt      48266  1
snd_hda_codec_generic    58021  1 snd_hda_codec_idt
snd_hda_intel          26023  5
snd_hda_controller     26262  1 snd_hda_intel
snd_hda_codec          93797  5 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep              12906  1 snd_hda_codec
snd_pcm                78128  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer              26149  1 snd_pcm
snd                    55101  18 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
soundcore              12890  2 snd,snd_hda_codec
Last edited by outzen on 2020-03-29 12:58, edited 3 times in total.
outzen
 
Posts: 19
Joined: 2020-03-29 07:44

Re: No Sound after boot

Postby Head_on_a_Stick » 2020-03-29 12:44

Please edit your posts and surround the command output with code tags, as I requested above. Click on the "code tags" bit in my last post to find out how to do that.
Black Lives Matter

Debian buster-backports ISO image: for new hardware support
User avatar
Head_on_a_Stick
 
Posts: 12647
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: No Sound after boot

Postby Head_on_a_Stick » 2020-03-29 12:58

Thanks for adding the code tags, that's much better :)

outzen wrote:Output after a fresh reboot;
Command: pacmd list-sinks
output: No PulseAudio deamon running, or not running as sessions deamon

^ There's the problem.

Which desktop environment is this?

Can we see
Code: Select all
systemctl --user status pulseaudio.s{ervice,ocket}
Black Lives Matter

Debian buster-backports ISO image: for new hardware support
User avatar
Head_on_a_Stick
 
Posts: 12647
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: No Sound after boot

Postby outzen » 2020-03-29 13:09

Yeah ... much more readable ... missed that from your first posts :-P

used this command; (not sure if you made a typo)
systemctl --user status pulseaudio.socket
Code: Select all
● pulseaudio.socket - Sound System
   Loaded: loaded (/usr/lib/systemd/user/pulseaudio.socket; disabled; vendor preset: enabled)
   Active: inactive (dead)
   Listen: /run/user/1001/pulse/native (Stream)


ie, with the audio working ... do you also want me to run it after a reboot?
outzen
 
Posts: 19
Joined: 2020-03-29 07:44

Re: No Sound after boot

Postby Head_on_a_Stick » 2020-03-29 13:49

outzen wrote:do you also want me to run it after a reboot?

No, that's fine.

Try
Code: Select all
systemctl --user enable --now pulseaudio.s{ocket,ervice}

^ Run that command as your normal user.
Black Lives Matter

Debian buster-backports ISO image: for new hardware support
User avatar
Head_on_a_Stick
 
Posts: 12647
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: No Sound after boot

Postby outzen » 2020-03-29 14:05

command: systemctl --user enable --now pulseaudio.s{ocket,ervice}
Code: Select all
Created symlink /home/outzen/.config/systemd/user/sockets.target.wants/pulseaudio.socket → /usr/lib/systemd/user/pulseaudio.socket.
Created symlink /home/outzen/.config/systemd/user/default.target.wants/pulseaudio.service → /usr/lib/systemd/user/pulseaudio.service.
Job for pulseaudio.service failed because the control process exited with error code.
See "systemctl status pulseaudio.service" and "journalctl -xe" for details.


command: systemctl status pulseaudio.service
Code: Select all
Unit pulseaudio.service could not be found.


Also ran the command: journalctl -xe
do you want this also (more than 2000 lines)? :-)
outzen
 
Posts: 19
Joined: 2020-03-29 07:44

Re: No Sound after boot

Postby Head_on_a_Stick » 2020-03-29 14:11

outzen wrote:command: systemctl status pulseaudio.service
Code: Select all
Unit pulseaudio.service could not be found.

It's a user service so you should run the command with the --user option (as per my earlier commands).

outzen wrote:Also ran the command: journalctl -xe
do you want this also (more than 2000 lines)? :-)

Dear me, no. Let's narrow it down a bit:
Code: Select all
journalctl --unit puleaudio.service

But I'm not sure how that works for user services, you might not find any entries that way.

Another filtering method would be
Code: Select all
journalctl --since='1 minute ago'

^ Run that just after trying to start pulseaudio.service.
Black Lives Matter

Debian buster-backports ISO image: for new hardware support
User avatar
Head_on_a_Stick
 
Posts: 12647
Joined: 2014-06-01 17:46
Location: /dev/chair

Re: No Sound after boot

Postby outzen » 2020-03-29 14:16

Both of them gives me "no entries"
outzen
 
Posts: 19
Joined: 2020-03-29 07:44

Re: No Sound after boot

Postby outzen » 2020-03-29 14:19

Ahh ... sorry ... did not see that I should start the pulseaudio service

how do I do that :-)
outzen
 
Posts: 19
Joined: 2020-03-29 07:44

Re: No Sound after boot

Postby outzen » 2020-03-29 15:06

OK, wrote "pulseaudio" on the command line and it gave me this;

Code: Select all
E: [pulseaudio] pid.c: Daemon already running.
E: [pulseaudio] main.c: pa_pid_file_create() failed.


Command: journalctl --unit pulseaudio.service
no entries

command: journalctl --since='1 minute ago'
Code: Select all
-- Logs begin at Sun 2020-03-29 14:01:25 BST, end at Sun 2020-03-29 16:46:37 BST. --
Mar 29 16:46:37 JO_Video rtkit-daemon[532]: Successfully made thread 17720 of process 17720 (n/a) owned by '1001' high priority at nice level -11.
Mar 29 16:46:37 JO_Video rtkit-daemon[532]: Supervising 4 threads of 2 processes of 1 users.
outzen
 
Posts: 19
Joined: 2020-03-29 07:44

Re: No Sound after boot

Postby Head_on_a_Stick » 2020-03-29 15:36

Code: Select all
systemctl --user start pulseaduio.service # as your normal user
journalctl --since='1 minute ago'
Black Lives Matter

Debian buster-backports ISO image: for new hardware support
User avatar
Head_on_a_Stick
 
Posts: 12647
Joined: 2014-06-01 17:46
Location: /dev/chair

Next

Return to Hardware

Who is online

Users browsing this forum: No registered users and 11 guests

fashionable