Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230

 

 

 

Newbie <-- Kernel compiling quick question ??

Need help with peripherals or devices?
Post Reply
Message
Author
playahater
Posts: 1
Joined: 2005-10-23 21:16

Newbie <-- Kernel compiling quick question ??

#1 Post by playahater »

I have installed Sarge .. minimal installation .. but I got 2.4 kernel .. so .. I went to kernel.org and downloaded vanila source .. I compiled it but with no dma support ..
i was unsure .. while I was configuring kernel about that DMA because .. my MB wasn`t listed there .. i I put there some intel PII ..
and now .. everthing works exept DMA .. and everything is working fine except hdd .. :(

Can antone help me solve this problem .. What option should I enable in order to have dma ???
I have Aus P4P800 SE motherboard ...

Code: Select all

0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
        Subsystem: Asustek Computer, Inc. P4P800 Mainboard
        Flags: bus master, fast devsel, latency 0
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: <available only to root>

0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, fast devsel, latency 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fa100000-fa1fffff
        Prefetchable memory behind bridge: cff00000-efefffff

0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Asustek Computer, Inc. P4P800 Mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at ef00 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Asustek Computer, Inc. P4P800 Mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at ef20 [size=32]

0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Asustek Computer, Inc. P4P800 Mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at ef40 [size=32]

0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Asustek Computer, Inc. P4P800 Mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at ef80 [size=32]

0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
        Subsystem: Asustek Computer, Inc. P4P800 Mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 17
        Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <available only to root>

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fa200000-feafffff
        Prefetchable memory behind bridge: 20000000-200fffff

0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
        Flags: bus master, medium devsel, latency 0

0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Asustek Computer, Inc. P4P800 Mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at fc00 [size=16]
        Memory at 20100000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
        Subsystem: Asustek Computer, Inc. P4P800 Mainboard
        Flags: medium devsel, IRQ 7
        I/O ports at 0400 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
        Subsystem: Asustek Computer, Inc. P4P800 Mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at e800 [size=256]
        I/O ports at ee80 [size=64]
        Memory at febff800 (32-bit, non-prefetchable) [size=512]
        Memory at febff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: <available only to root>

0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4153 (prog-if 00 [VGA])
        Subsystem: Asustek Computer, Inc.: Unknown device 003c
        Flags: bus master, 66MHz, medium devsel, latency 255, IRQ 18
        Memory at e0000000 (32-bit, prefetchable) [size=128M]
        I/O ports at c000 [size=256]
        Memory at fa1f0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at fa1c0000 [disabled] [size=128K]
        Capabilities: <available only to root>

0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 4173
        Subsystem: Asustek Computer, Inc.: Unknown device 003d
        Flags: bus master, 66MHz, medium devsel, latency 64
        Memory at d8000000 (32-bit, prefetchable) [size=128M]
        Memory at fa1e0000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: <available only to root>

0000:02:05.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
        Subsystem: Asustek Computer, Inc.: Unknown device 811a
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
        Memory at fbefc000 (32-bit, non-prefetchable) [size=16K]
        I/O ports at d800 [size=256]
        Expansion ROM at 20000000 [disabled] [size=128K]
        Capabilities: <available only to root>

0000:02:0b.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
        Subsystem: LeadTek Research Inc.: Unknown device 663c
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: <available only to root>

0000:02:0b.2 Multimedia controller: Conexant: Unknown device 8802 (rev 05)
        Subsystem: LeadTek Research Inc.: Unknown device 663c
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: <available only to root>

0000:02:0d.0 Communication controller: Intel Corp. 536EP Data Fax Modem
        Subsystem: Intel Corp.: Unknown device 1000
        Flags: bus master, medium devsel, latency 64, IRQ 6
        Memory at fe400000 (32-bit, non-prefetchable) [size=4M]
        Capabilities: <available only to root>

Thanx in advance ..

lacek
Posts: 764
Joined: 2004-03-11 18:49
Location: Budapest, Hungary
Contact:

#2 Post by lacek »

If you didn't compile DMA into the kernel, you don't have any option but reconfigure and rebuild your kernel (you can enable DMA in Device drivers->ATA/ATAPI/MFM/RLL support->Use PCI DMA...). You may consider installing a prepackaged 2.6 kernel, however...

Post Reply