USB weel mouse Logitech M-BB48

[hakwes]

Sarge 3.1 on Motherboard Asus P4S800-MX.

I can´t set the mouse from right to left hand operation.
With application : Gnome/Desktop/Mouse

Tryed PS/2 with adapter (USB-PS/2). Not good. Cursor unmovable.
My 2-botton works nice in PS/2.

Must I invest in a new (8$) PS/2-mouse or have anyone some tips!

[lestoil]

Try gnome>Desktop>Preferences>Mouse to set mouse as left or right handed. In kde its kmenu>control center>peripheral devices>mouse. If mouse is frozen then tell us what does /etc/X11/XF86conf-4 mouse section show? What does lspci, lsusb and lsmod show? Did you apt-get install mdetect? Good luck.

[hakwes]

I tried in Gnome and in KDE too, but no luck. I can click left handed - but the button order don’t affect the mouse itself.

It is still right-hand buttons.
Mouse works OK - Buttons and weel

1) Yes I: apt-get install mdetect

2) etc/X11/XF86conf-4

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

3)


LinuS:~# lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 003: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse Plus]
Bus 001 Device 001: ID 0000:0000
LinuS:~#

4)
LinuS:~# lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX H ost (rev 11)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 0003
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) (rev 25)
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX/741/M741/760/M760 PCI/AGP
LinuS:~#

5)
LinuS:~# lsmod
Module Size Used by Not tainted
apm 8428 1 (autoclean)
mousedev 3604 2
hid 19076 0 (unused)
input 3040 0 [mousedev hid]
ehci-hcd 14764 0 (unused)
usb-ohci 16488 0 (unused)
usbcore 52268 1 [hid ehci-hcd usb-ohci]
i810_audio 21372 1
ac97_codec 11252 0 [i810_audio]
soundcore 3268 2 [i810_audio]
ide-scsi 8272 0
scsi_mod 86052 1 [ide-scsi]
sis900 11084 1
crc32 2848 0 [sis900]
ide-cd 27072 0
cdrom 26212 0 [ide-cd]
rtc 5768 0 (autoclean)
ext3 65388 1 (autoclean)
jbd 34628 1 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
sis5513 9872 1 (autoclean)
ide-disk 12448 2 (autoclean)
ide-core 91832 2 (autoclean) [ide-scsi ide-cd ide-detect sis5513 ide-disk]
unix 12752 232 (autoclean)
LinuS:~#
LinuS:~#




I am going to search for some cash...

or?

[lestoil]

What happens if you comment out 1st mouse section leaving only only lower mouse section? I have same motherboard with only second mouse section for my logitech mouse(different model).

[hakwes]

I did that. Result: no video started.

xmodmap -pp
The button order is 3 2 1 4 5 (1 2 3 4 5 in right handed mode)

Everything is OK on the right hand - buttons and weel.

I have OS X mouse and pen on the right and want Debian to the left. ( I am primary right-handed).

But Debian is like a female - hard to know what to say or do to make the accurate things happen...

[hakwes]

Are there some problems in USB setup? I tried a PS/2 wheel mouse, but the wheel did not function.

I did some changes in “XF86Config-4”. And then both mouse’s are working correctly.

Se: http://fyrskeppsvagen.com/tips/linux_pc ... index.html

hope this help someone with the same problem...

.