I'm using a AOC-SASLP-MV8, with SAS/SATA support. During bootup, the controllers bios shows up, and shows the 8 connected hd's being detected. But, it seems that the kernel does not load the hd's into the system. Looks like the nvsas drivers is needed, but possibly the 88SE6480 is not detected?
Controller: Marvel 88SE6480
Expected driver: mvsas
Code: Select all
# lsmod | grep mvsas
mvsas 23952 0
libsas 48520 1 mvsas
scsi_transport_sas 37504 2 mvsas,libsas
scsi_mod 160888 8 sg,sr_mod,mvsas,libsas,scsi_transport_sas,usb_storage,sd_mod,libata
ftp://ftp.supermicro.com/driver/SAS/Marvell/MV8/Linux/