I confirmed that the modules in
http://paste.debian.net/348970/ are same as those in
http://paste.debian.net/348969/.
By the way, please do not write like
ELDebiano wrote:Code: Select all
new version of module_before http://paste.debian.net/348969/
I cannot move to the linked page if you write like the above.
Write like:
new version of module_before
http://paste.debian.net/348969/
or directly:
Code: Select all
Module Size Used by
cfg80211 405538 0
rfkill 18867 1 cfg80211
cpufreq_userspace 12525 0
cpufreq_powersave 12454 0
cpufreq_conservative 14184 0
cpufreq_stats 12782 0
nfsd 263032 2
auth_rpcgss 51211 1 nfsd
oid_registry 12419 1 auth_rpcgss
nfs_acl 12511 1 nfsd
nfs 188136 0
lockd 83389 2 nfs,nfsd
fscache 45542 1 nfs
sunrpc 237402 6 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
joydev 17063 0
k10temp 12618 0
edac_mce_amd 21166 0
edac_core 51465 0
kvm_amd 59131 0
kvm 388635 1 kvm_amd
pcspkr 12595 0
emu10k1_gp 12461 0
psmouse 99249 0
snd_emu10k1 148204 4
gameport 13449 2 emu10k1_gp
snd_util_mem 12747 1 snd_emu10k1
serio_raw 12849 0
snd_rawmidi 26806 1 snd_emu10k1
snd_seq_device 13132 2 snd_rawmidi,snd_emu10k1
snd_ac97_codec 118711 1 snd_emu10k1
snd_hda_codec_hdmi 45118 1
snd_hda_intel 26327 4
snd_hda_controller 26646 1 snd_hda_intel
snd_hda_codec 104463 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller
snd_hwdep 13148 2 snd_hda_codec,snd_emu10k1
snd_pcm 88662 6 snd_ac97_codec,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_emu10k1,snd_hda_controller
sp5100_tco 12864 0
snd_timer 26614 2 snd_pcm,snd_emu10k1
snd 65244 26 snd_ac97_codec,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_emu10k1,snd_seq_device
ac97_bus 12510 1 snd_ac97_codec
soundcore 13026 2 snd,snd_hda_codec
shpchp 31121 0
i2c_piix4 20864 0
evdev 17445 6
nuvoton_cir 17207 0
rc_core 22404 1 nuvoton_cir
acpi_cpufreq 17218 0
processor 28221 1 acpi_cpufreq
thermal_sys 27642 1 processor
vmhgfs 65266 0
vmw_vmci 55383 1 vmhgfs
fuse 83350 3
parport_pc 26300 0
ppdev 16782 0
lp 17074 0
parport 35749 3 lp,ppdev,parport_pc
autofs4 35529 2
ext4 473802 1
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 82413 1 ext4
usb_storage 56215 2
hid_logitech 25801 0
ff_memless 12675 1 hid_logitech
hid_generic 12393 0
usbhid 44460 0
hid 102264 3 hid_generic,hid_logitech,usbhid
sg 29973 0
sd_mod 44356 3
crc_t10dif 12431 1 sd_mod
crct10dif_generic 12581 1
crct10dif_common 12356 2 crct10dif_generic,crc_t10dif
ata_generic 12490 0
ohci_pci 12808 0
xhci_hcd 148881 0
ohci_hcd 42982 1 ohci_pci
ehci_pci 12512 0
ehci_hcd 69837 1 ehci_pci
radeon 1345162 3
ahci 33291 0
i2c_algo_bit 12751 1 radeon
libahci 27158 1 ahci
pata_atiixp 12747 0
ttm 77862 1 radeon
r8169 68262 0
mii 12675 1 r8169
firewire_ohci 39523 0
drm_kms_helper 49210 1 radeon
libata 177457 4 ahci,libahci,ata_generic,pata_atiixp
firewire_core 56665 1 firewire_ohci
crc_itu_t 12347 1 firewire_core
scsi_mod 191405 4 sg,usb_storage,libata,sd_mod
drm 249955 6 ttm,drm_kms_helper,radeon
usbcore 195340 7 usb_storage,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common 12440 1 usbcore
i2c_core 46012 5 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon
button 12944 0
Really, your way irritates me.
If the USB3 flash was not connected when you executed "lsmod > modules_before" while the debian installed in the USB2 flash (which was connected to the USB2 port) were booting, the necessary modules for the USB3 port are loaded before any USB3 media is connected to the USB3 port, and the necessary modules are in
http://paste.debian.net/348969/
Add the following lines to /etc/initramfs-tools/modules:
Code: Select all
ohci_pci
xhci_hcd
ohci_hcd
ehci_pci
ehci_hcd
ahci
libahci
firewire_ohci
libata
firewire_core
crc_itu_t
usbcore
usb_common
usb_storage
hid_logitech
ff_memless
hid_generic
usbhid
hid
ata_generic
scsi_mod
and execute