Test setup:
- Hardware
- 1 x IDE hard drive connected via IDE
1 x SSD connected via IDE to SATA adapter
- 1 x IDE hard drive connected via IDE
- Software
- Debian is installed on both drives from CD1
IDE drive is running Stretch
SSD drive is running Jessie
1 x partition for / on both drives
- Debian is installed on both drives from CD1
Code: Select all
[ 1.680265] ata2.00: ATAPI: PIONEER BD-RW BDR-209D, 1.20, max UDMA/100
[ 1.680422] ata2.01: ATA-9: CT120BX100SSD1, MU02, max UDMA/133
[ 1.680425] ata2.01: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/1)
[ 1.704255] ata2.00: configured for UDMA/100
[ 1.708699] ata2.01: NODEV after polling detection
[ 1.708702] ata2.01: revalidation failed (errno=-2)
[ 7.088251] ata2.00: configured for UDMA/100
[ 7.092683] ata2.01: NODEV after polling detection
[ 7.092686] ata2.01: revalidation failed (errno=-2)
[ 12.464251] ata2.00: configured for UDMA/100
[ 12.468679] ata2.01: NODEV after polling detection
[ 12.468682] ata2.01: revalidation failed (errno=-2)
[ 12.468738] ata2.01: disabled
[ 12.468761] ata2.00: failed to set xfermode (err_mask=0x40)
[ 17.836256] ata2.00: configured for UDMA/100