Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230

 

 

 

Non-fatal Machine Check Exception on every reboot?

Need help with peripherals or devices?
Post Reply
Message
Author
Morning Song
Posts: 3
Joined: 2017-10-19 07:54

Non-fatal Machine Check Exception on every reboot?

#1 Post by Morning Song »

I've got a new headless system that I've put together, and as far as I can tell it seems to be running completely fine on the current Debian stable. However, consistently on every reboot, within about ten minutes of every bootup, it registers a single Machine Check Exception--There's no oops in the dmesg and it doesn't panic the kernel. The system doesn't show any further anomalies; the RAM passed a memtest and I haven't experienced a single application-level crash that I am aware of. I have also left it on for hours to days between reboots and never had it register more than the single MCE for each boot. The only temperature sensors currently supported in linux are the CPU core temps, but none of those ever goes over 35C.

The motherboard is an ASRock J3455M, a motherboard that comes with an embedded low-power Celeron chip soldered in, and is a relatively recent board (2016 release). It has two sticks of 4GB DDR3 ram each, and an add-on PCIe 1x SATA card. The system drive is a 2.5" SSD, and it additionally has two spinning hard drives with aufs-based spanning. In normal operation, the only external connections are power and ethernet; no monitor, keyboard, or USB peripherals are connected.

I'm attaching what relevant info I have, if any of it is any help to anyone. I'm not incredibly worried about this, but I'm curious if anyone has an idea as to what's going on, or if anyone has had similar symptoms and resolved them.

uname -a
Linux Kouyunjik 4.9.0-4-amd64 #1 SMP Debian 4.9.51-1 (2017-09-28) x86_64 GNU/Linux

/var/log/mcelog

Code: Select all

mcelog: failed to prefill DIMM database from DMI data
mcelog: Family 6 Model 92 CPU: only decoding architectural errors
Hardware event. This is not a software error.
MCE 0
CPU 0 BANK 4
ADDR fef13bc0
TIME 1508035511 Sat Oct 14 22:45:11 2017
MCG status:
MCi status:
Uncorrected error
MCi_ADDR register valid
Processor context corrupt
MCA: Internal unclassified error: 408
Running trigger `unknown-error-trigger'
STATUS a600000000020408 MCGSTATUS 0
MCGCAP c07 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 6 Model 92
mcelog: failed to prefill DIMM database from DMI data
mcelog: Family 6 Model 92 CPU: only decoding architectural errors
Hardware event. This is not a software error.
MCE 0
CPU 0 BANK 4
ADDR fef13bc0
TIME 1508100399 Sun Oct 15 16:46:39 2017
MCG status:
MCi status:
Uncorrected error
MCi_ADDR register valid
Processor context corrupt
MCA: Internal unclassified error: 408
Running trigger `unknown-error-trigger'
STATUS a600000000020408 MCGSTATUS 0
MCGCAP c07 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 6 Model 92
mcelog: failed to prefill DIMM database from DMI data
mcelog: Family 6 Model 92 CPU: only decoding architectural errors
Hardware event. This is not a software error.
MCE 0
CPU 0 BANK 4
ADDR fef13bc0
TIME 1508330436 Wed Oct 18 08:40:36 2017
MCG status:
MCi status:
Uncorrected error
MCi_ADDR register valid
Processor context corrupt
MCA: Internal unclassified error: 408
Running trigger `unknown-error-trigger'
STATUS a600000000020408 MCGSTATUS 0
MCGCAP c07 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 6 Model 92
lsmod output (all audio drivers have been blacklisted, but this hasn't had an effect on the MCE)

Code: Select all

Module                  Size  Used by
fuse                   98304  1
btrfs                1060864  0
xor                    24576  1 btrfs
raid6_pq              110592  1 btrfs
ufs                    73728  0
qnx4                   16384  0
hfsplus               102400  0
hfs                    57344  0
minix                  36864  0
ntfs                  102400  0
msdos                  20480  0
jfs                   176128  0
dm_mod                118784  0
bluetooth             552960  0
rfkill                 24576  2 bluetooth
msr                    16384  0
ipt_REJECT             16384  13
nf_reject_ipv4         16384  1 ipt_REJECT
cpufreq_conservative    16384  0
cpufreq_powersave      16384  0
cpufreq_userspace      16384  0
ip6table_filter        16384  0
ip6_tables             28672  1 ip6table_filter
xt_multiport           16384  2
iptable_filter         16384  1
aufs                  413696  37
nls_ascii              16384  1
nls_cp437              20480  1
vfat                   20480  1
fat                    69632  2 msdos,vfat
xfs                  1220608  2
libcrc32c              16384  1 xfs
intel_rapl             20480  0
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
kvm_intel             192512  0
kvm                   589824  1 kvm_intel
irqbypass              16384  1 kvm
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
evdev                  24576  4
i915                 1232896  1
efi_pstore             16384  0
ghash_clmulni_intel    16384  0
drm_kms_helper        155648  1 i915
intel_rapl_perf        16384  0
pcspkr                 16384  0
drm                   360448  3 i915,drm_kms_helper
mei_me                 36864  0
serio_raw              16384  0
efivars                20480  1 efi_pstore
i2c_algo_bit           16384  1 i915
mei                   102400  1 mei_me
shpchp                 36864  0
sg                     32768  0
ucsi                   16384  0
button                 16384  1 i915
battery                20480  0
video                  40960  1 i915
nfsd                  327680  13
coretemp               16384  0
auth_rpcgss            61440  1 nfsd
oid_registry           16384  1 auth_rpcgss
nfs_acl                16384  1 nfsd
parport_pc             28672  0
lockd                  90112  1 nfsd
grace                  16384  2 nfsd,lockd
ppdev                  20480  0
sunrpc                344064  18 auth_rpcgss,nfsd,nfs_acl,lockd
lp                     20480  0
parport                49152  3 lp,parport_pc,ppdev
efivarfs               16384  1
ip_tables              24576  1 iptable_filter
x_tables               36864  6 xt_multiport,ipt_REJECT,ip_tables,iptable_filter,ip6table_filter,ip6_tables
autofs4                40960  2
ext4                  585728  1
crc16                  16384  2 bluetooth,ext4
jbd2                  106496  1 ext4
crc32c_generic         16384  0
fscrypto               28672  1 ext4
ecb                    16384  0
mbcache                16384  2 ext4
sd_mod                 45056  8
crc32c_intel           24576  4
aesni_intel           167936  1
xhci_pci               16384  0
aes_x86_64             20480  1 aesni_intel
glue_helper            16384  1 aesni_intel
lrw                    16384  1 aesni_intel
gf128mul               16384  1 lrw
ablk_helper            16384  1 aesni_intel
cryptd                 24576  3 ablk_helper,ghash_clmulni_intel,aesni_intel
ahci                   36864  5
psmouse               135168  0
xhci_hcd              188416  1 xhci_pci
libahci                32768  1 ahci
i2c_i801               24576  0
usbcore               249856  2 xhci_pci,xhci_hcd
libata                249856  2 ahci,libahci
i2c_smbus              16384  1 i2c_i801
usb_common             16384  1 usbcore
scsi_mod              225280  3 sd_mod,libata,sg
r8169                  81920  0
mii                    16384  1 r8169
thermal                20480  0
fan                    16384  0
i2c_hid                20480  0
hid                   122880  1 i2c_hid
dmesg of most recent bootup

Code: Select all

[    0.000000] Linux version 4.9.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.51-1 (2017-09-28)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=/dev/sda2 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000012151000-0x00000000774c5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000774c6000-0x00000000795e3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000795e4000-0x00000000796b4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000796b5000-0x00000000799d9fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000799da000-0x0000000079d7cfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079d7d000-0x0000000079dd6fff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000079dd7000-0x000000007a14ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a150000-0x000000007a150fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007a151000-0x000000007a17afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a17b000-0x000000007a755fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a756000-0x000000007a757fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a758000-0x000000007affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi:  ESRT=0x79d7b918  ACPI=0x799bb000  ACPI 2.0=0x799bb000  SMBIOS=0xf05e0  SMBIOS 3.0=0xf0600  MPS=0xfc9d0
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-6FFFF write-back
[    0.000000]   70000-7FFFF uncachable
[    0.000000]   80000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007B000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 0100000000 mask 7F00000000 write-back
[    0.000000]   4 base 0200000000 mask 7F80000000 write-back
[    0.000000]   5 base 00FF800000 mask 7FFF800000 write-combining
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT
[    0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcbc0-0x000fcbcf] mapped at [ffff90c5400fcbc0]
[    0.000000] esrt: Reserving ESRT space from 0x0000000079d7b918 to 0x0000000079d7b950.
[    0.000000] Base memory trampoline at [ffff90c540094000] 94000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x4ed2f000, 0x4ed2ffff] PGTABLE
[    0.000000] BRK [0x4ed30000, 0x4ed30fff] PGTABLE
[    0.000000] BRK [0x4ed31000, 0x4ed31fff] PGTABLE
[    0.000000] BRK [0x4ed32000, 0x4ed32fff] PGTABLE
[    0.000000] BRK [0x4ed33000, 0x4ed33fff] PGTABLE
[    0.000000] BRK [0x4ed34000, 0x4ed34fff] PGTABLE
[    0.000000] BRK [0x4ed35000, 0x4ed35fff] PGTABLE
[    0.000000] BRK [0x4ed36000, 0x4ed36fff] PGTABLE
[    0.000000] BRK [0x4ed37000, 0x4ed37fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35bff000-0x36df6fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000799BB000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000799BB0C0 0000E4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000799C45C0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000799BB250 009368 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000799D9080 000040
[    0.000000] ACPI: FPDT 0x00000000799C46E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000799C4730 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000799C47D0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: DBG2 0x00000000799C4810 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: DBGP 0x00000000799C4890 000034 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: HPET 0x00000000799C48D0 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: LPIT 0x00000000799C4910 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: APIC 0x00000000799C4970 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: NPKT 0x00000000799C4A00 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: PRAM 0x00000000799C4A70 000030 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: WSMT 0x00000000799C4AA0 000028 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x00000000799C4AD0 000B53 (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x00000000799C5630 0016E9 (v01 Intel_ Platform 00001000 INTL 20120913)
[    0.000000] ACPI: AAFT 0x00000000799C6D20 0002AE (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000799C6FD0 000442 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000799C7420 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000799C7B50 00032D (v02 PmRef  Cpu0Tst  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000799C7E80 00017C (v02 PmRef  ApTst    00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000799C8000 002760 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000799CA760 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.000000] ACPI: DMAR 0x00000000799CA7B0 0000A8 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: WDAT 0x00000000799CA860 000104 (v01                 00000000      00000000)
[    0.000000] ACPI: NHLT 0x00000000799CA970 001A50 (v00 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27fff8000-0x27fffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000003efff]
[    0.000000]   node   0: [mem 0x0000000000040000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000012151000-0x00000000774c5fff]
[    0.000000]   node   0: [mem 0x00000000795e4000-0x00000000796b4fff]
[    0.000000]   node   0: [mem 0x0000000079dd7000-0x000000007a14ffff]
[    0.000000]   node   0: [mem 0x000000007a17b000-0x000000007a755fff]
[    0.000000]   node   0: [mem 0x000000007a758000-0x000000007affffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[    0.000000] On node 0 totalpages: 2057695
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 43 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7514 pages used for memmap
[    0.000000]   DMA32 zone: 480834 pages, LIFO batch:31
[    0.000000]   Normal zone: 24576 pages used for memmap
[    0.000000]   Normal zone: 1572864 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[    0.000000] PM: Registered nosave memory: [mem 0x774c6000-0x795e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x796b5000-0x799d9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x799da000-0x79d7cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x79d7d000-0x79dd6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a150000-0x7a150fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a151000-0x7a17afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a756000-0x7a757fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xcfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff90c7bfc00000 s103512 r8192 d31656 u524288
[    0.000000] pcpu-alloc: s103512 r8192 d31656 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2025498
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=/dev/sda2 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7911380K/8230780K available (6196K kernel code, 1137K rwdata, 2856K rodata, 1396K init, 688K bss, 319400K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: PIT calibration matches HPET. 1 loops
[    0.000000] tsc: Detected 1497.519 MHz processor
[    0.000089] Calibrating delay loop (skipped), value calculated using timer frequency.. 2995.20 BogoMIPS (lpj=5990400)
[    0.000094] pid_max: default: 32768 minimum: 301
[    0.000128] ACPI: Core revision 20160831
[    0.017946] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.019204] Security Framework initialized
[    0.019207] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.019218] AppArmor: AppArmor disabled by boot time parameter
[    0.020097] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.023704] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.025305] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.025322] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.026003] CPU: Physical Processor ID: 0
[    0.026005] CPU: Processor Core ID: 0
[    0.026030] mce: CPU supports 7 MCE banks
[    0.026082] CPU0: Thermal monitoring enabled (TM1)
[    0.026160] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.026161] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.028625] Freeing SMP alternatives memory: 24K
[    0.045465] ftrace: allocating 25191 entries in 99 pages
[    0.103899] smpboot: Max logical packages: 1
[    0.103911] DMAR: Host address width 39
[    0.103914] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[    0.103932] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.103934] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[    0.103945] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.103948] DMAR: RMRR base: 0x000000795a9000 end: 0x000000795c8fff
[    0.103950] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[    0.103954] DMAR-IR: IOAPIC id 1 under DRHD base  0xfed65000 IOMMU 1
[    0.103956] DMAR-IR: HPET id 0 under DRHD base 0xfed65000
[    0.103957] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.106025] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.106028] x2apic enabled
[    0.106045] Switched APIC routing to cluster x2apic.
[    0.110700] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.150406] TSC deadline timer enabled
[    0.150414] smpboot: CPU0: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz (family: 0x6, model: 0x5c, stepping: 0x9)
[    0.150422] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.150449] ... version:                4
[    0.150450] ... bit width:              48
[    0.150451] ... generic registers:      4
[    0.150452] ... value mask:             0000ffffffffffff
[    0.150453] ... max period:             00007fffffffffff
[    0.150454] ... fixed-purpose events:   3
[    0.150455] ... event mask:             000000070000000f
[    0.151749] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.152046] x86: Booting SMP configuration:
[    0.152048] .... node  #0, CPUs:      #1 #2 #3
[    0.392770] x86: Booted up 1 node, 4 CPUs
[    0.392773] smpboot: Total of 4 processors activated (11984.65 BogoMIPS)
[    0.395665] devtmpfs: initialized
[    0.395805] x86/mm: Memory block size: 128MB
[    0.401711] PM: Registering ACPI NVS region [mem 0x796b5000-0x799d9fff] (3297280 bytes)
[    0.401896] PM: Registering ACPI NVS region [mem 0x7a150000-0x7a150fff] (4096 bytes)
[    0.402003] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.402022] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.402134] pinctrl core: initialized pinctrl subsystem
[    0.405632] NET: Registered protocol family 16
[    0.414694] cpuidle: using governor ladder
[    0.430714] cpuidle: using governor menu
[    0.430835] ACPI: bus type PCI registered
[    0.430837] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.430990] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.430994] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.431024] PCI: Using configuration type 1 for base access
[    0.447102] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.447104] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.447737] ACPI: Added _OSI(Module Device)
[    0.447738] ACPI: Added _OSI(Processor Device)
[    0.447740] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.447741] ACPI: Added _OSI(Processor Aggregator Device)
[    0.448343] ACPI: Executed 3 blocks of module-level executable AML code
[    0.460751] ACPI: Dynamic OEM Table Load:
[    0.460763] ACPI: SSDT 0xFFFF90C7B5841A00 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.461628] ACPI: Dynamic OEM Table Load:
[    0.461638] ACPI: SSDT 0xFFFF90C7B5FCF600 00015F (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.462063] ACPI: Dynamic OEM Table Load:
[    0.462072] ACPI: SSDT 0xFFFF90C7B5865180 00008D (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.465108] ACPI: Interpreter enabled
[    0.465156] ACPI: (supports S0 S3 S4 S5)
[    0.465159] ACPI: Using IOAPIC for interrupt routing
[    0.465312] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.488728] ACPI: Power Resource [FN00] (on)
[    0.490238] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.490249] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.491664] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.493091] PCI host bridge to bus 0000:00
[    0.493095] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.493098] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.493100] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.493103] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.493105] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.493107] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.493110] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.493112] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[    0.493114] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
[    0.493117] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
[    0.493119] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[    0.493122] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.493139] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[    0.493689] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
[    0.493707] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.493719] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.493727] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.494299] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300
[    0.494323] pci 0000:00:0e.0: reg 0x10: [mem 0x91310000-0x91313fff 64bit]
[    0.494353] pci 0000:00:0e.0: reg 0x20: [mem 0x91000000-0x910fffff 64bit]
[    0.494425] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[    0.494931] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.495022] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[    0.495058] pci 0000:00:0f.0: reg 0x10: [mem 0x9131b000-0x9131bfff 64bit]
[    0.495189] pci 0000:00:0f.0: PME# supported from D3hot
[    0.495667] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[    0.495688] pci 0000:00:12.0: reg 0x10: [mem 0x91314000-0x91315fff]
[    0.495699] pci 0000:00:12.0: reg 0x14: [mem 0x91318000-0x913180ff]
[    0.495709] pci 0000:00:12.0: reg 0x18: [io  0xf090-0xf097]
[    0.495718] pci 0000:00:12.0: reg 0x1c: [io  0xf080-0xf083]
[    0.495728] pci 0000:00:12.0: reg 0x20: [io  0xf060-0xf07f]
[    0.495739] pci 0000:00:12.0: reg 0x24: [mem 0x91317000-0x913177ff]
[    0.495793] pci 0000:00:12.0: PME# supported from D3hot
[    0.496242] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
[    0.496332] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[    0.496717] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.496797] pci 0000:00:13.1: [8086:5ad9] type 01 class 0x060400
[    0.496886] pci 0000:00:13.1: PME# supported from D0 D3hot D3cold
[    0.497268] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.497348] pci 0000:00:13.2: [8086:5ada] type 01 class 0x060400
[    0.497437] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
[    0.497819] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.497904] pci 0000:00:13.3: [8086:5adb] type 01 class 0x060400
[    0.497993] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[    0.498377] pci 0000:00:13.3: System wakeup disabled by ACPI
[    0.498484] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[    0.498521] pci 0000:00:15.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[    0.498628] pci 0000:00:15.0: PME# supported from D3hot D3cold
[    0.499031] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.499171] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[    0.499745] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[    0.499802] pci 0000:00:1f.1: reg 0x10: [mem 0x91316000-0x913160ff 64bit]
[    0.499881] pci 0000:00:1f.1: reg 0x20: [io  0xf040-0xf05f]
[    0.500528] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.500553] pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.500592] pci 0000:01:00.0: reg 0x18: [mem 0x91204000-0x91204fff 64bit]
[    0.500614] pci 0000:01:00.0: reg 0x20: [mem 0x91200000-0x91203fff 64bit pref]
[    0.500638] pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.500742] pci 0000:01:00.0: supports D1 D2
[    0.500744] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.500819] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.510864] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.510873] pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]
[    0.510881] pci 0000:00:13.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.511025] pci 0000:02:00.0: [1b4b:9215] type 00 class 0x010601
[    0.511046] pci 0000:02:00.0: reg 0x10: [io  0xd050-0xd057]
[    0.511057] pci 0000:02:00.0: reg 0x14: [io  0xd040-0xd043]
[    0.511069] pci 0000:02:00.0: reg 0x18: [io  0xd030-0xd037]
[    0.511080] pci 0000:02:00.0: reg 0x1c: [io  0xd020-0xd023]
[    0.511092] pci 0000:02:00.0: reg 0x20: [io  0xd000-0xd01f]
[    0.511104] pci 0000:02:00.0: reg 0x24: [mem 0x91110000-0x911107ff]
[    0.511116] pci 0000:02:00.0: reg 0x30: [mem 0x91100000-0x9110ffff pref]
[    0.511189] pci 0000:02:00.0: PME# supported from D3hot
[    0.511243] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.522870] pci 0000:00:13.1: PCI bridge to [bus 02]
[    0.522878] pci 0000:00:13.1:   bridge window [io  0xd000-0xdfff]
[    0.522886] pci 0000:00:13.1:   bridge window [mem 0x91100000-0x911fffff]
[    0.523014] pci 0000:00:13.2: PCI bridge to [bus 03]
[    0.523112] pci 0000:00:13.3: PCI bridge to [bus 04]
[    0.525746] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.525880] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.526017] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.526146] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.526275] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.526406] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.526540] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.526670] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.531937] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.532309] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.532312] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.532318] vgaarb: loaded
[    0.532319] vgaarb: bridge control possible 0000:00:02.0
[    0.532405] Registered efivars operations
[    0.557457] PCI: Using ACPI for IRQ routing
[    0.585649] PCI: pci_cache_line_size set to 64 bytes
[    0.585729] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
[    0.585732] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.585733] e820: reserve RAM buffer [mem 0x774c6000-0x77ffffff]
[    0.585735] e820: reserve RAM buffer [mem 0x796b5000-0x7bffffff]
[    0.585737] e820: reserve RAM buffer [mem 0x7a150000-0x7bffffff]
[    0.585739] e820: reserve RAM buffer [mem 0x7a756000-0x7bffffff]
[    0.585741] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[    0.586099] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.586109] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[    0.588172] clocksource: Switched to clocksource hpet
[    0.603033] VFS: Disk quotas dquot_6.6.0
[    0.603087] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.603287] pnp: PnP ACPI init
[    0.603841] system 00:00: [io  0x0280-0x028f] has been reserved
[    0.603845] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.603848] system 00:00: [io  0x02a0-0x02af] has been reserved
[    0.603855] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.604875] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.605811] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.605814] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.605817] system 00:02: [io  0x0500-0x05fe] has been reserved
[    0.605822] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.606511] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.606515] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.606519] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.606522] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.606524] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.606527] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.606534] system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved
[    0.606537] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.606541] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.606545] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.606832] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.607125] pnp: PnP ACPI: found 5 devices
[    0.617958] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.618009] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.618015] pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]
[    0.618021] pci 0000:00:13.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.618031] pci 0000:00:13.1: PCI bridge to [bus 02]
[    0.618034] pci 0000:00:13.1:   bridge window [io  0xd000-0xdfff]
[    0.618039] pci 0000:00:13.1:   bridge window [mem 0x91100000-0x911fffff]
[    0.618048] pci 0000:00:13.2: PCI bridge to [bus 03]
[    0.618060] pci 0000:00:13.3: PCI bridge to [bus 04]
[    0.618073] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.618076] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.618078] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.618081] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.618083] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.618086] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.618088] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.618091] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[    0.618093] pci_bus 0000:00: resource 12 [mem 0x7b800001-0x7bffffff window]
[    0.618095] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
[    0.618098] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
[    0.618100] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.618103] pci_bus 0000:01: resource 1 [mem 0x91200000-0x912fffff]
[    0.618105] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.618107] pci_bus 0000:02: resource 1 [mem 0x91100000-0x911fffff]
[    0.618405] NET: Registered protocol family 2
[    0.618805] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.619186] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.619707] TCP: Hash tables configured (established 65536 bind 65536)
[    0.619783] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.619890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.620104] NET: Registered protocol family 1
[    0.620136] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.620735] PCI: CLS 0 bytes, default 64
[    0.620835] Unpacking initramfs...
[    1.235410] Freeing initrd memory: 18400K
[    1.235534] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.235539] software IO TLB [mem 0x6eec0000-0x72ec0000] (64MB) mapped at [ffff90c5aeec0000-ffff90c5b2ebffff]
[    1.236396] audit: initializing netlink subsys (disabled)
[    1.236442] audit: type=2000 audit(1508330437.195:1): initialized
[    1.237346] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.237464] zbud: loaded
[    1.239476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.239575] io scheduler noop registered
[    1.239577] io scheduler deadline registered
[    1.239603] io scheduler cfq registered (default)
[    1.241267] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
[    1.241271] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.241275] pcie_pme 0000:00:13.0:pcie001: service driver pcie_pme loaded
[    1.241306] pcieport 0000:00:13.1: Signaling PME through PCIe PME interrupt
[    1.241309] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.241313] pcie_pme 0000:00:13.1:pcie001: service driver pcie_pme loaded
[    1.241346] pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt
[    1.241350] pcie_pme 0000:00:13.2:pcie001: service driver pcie_pme loaded
[    1.241382] pcieport 0000:00:13.3: Signaling PME through PCIe PME interrupt
[    1.241388] pcie_pme 0000:00:13.3:pcie001: service driver pcie_pme loaded
[    1.241407] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.241416] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.241448] intel_idle: MWAIT substates: 0x11242020
[    1.241450] intel_idle: v0.4.1 model 0x5C
[    1.241934] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.244540] GHES: HEST is not enabled!
[    1.244716] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.245820] Linux agpgart interface v0.103
[    1.245947] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.245949] AMD IOMMUv2 functionality not available on this system
[    1.246618] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.250016] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.250027] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.250439] mousedev: PS/2 mouse device common for all mice
[    1.250531] rtc_cmos 00:04: RTC can wake from S4
[    1.251071] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.251177] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.251204] intel_pstate: Intel P-state driver initializing
[    1.251961] ledtrig-cpu: registered to indicate activity on CPUs
[    1.253005] NET: Registered protocol family 10
[    1.253920] mip6: Mobile IPv6
[    1.253946] NET: Registered protocol family 17
[    1.253955] mpls_gso: MPLS GSO support
[    1.254830] microcode: sig=0x506c9, pf=0x1, revision=0x1e
[    1.255215] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.256005] registered taskstats version 1
[    1.256059] zswap: loaded using pool lzo/zbud
[    1.256714] ima: No TPM chip found, activating TPM-bypass!
[    1.257837] rtc_cmos 00:04: setting system clock to 2017-10-18 12:40:37 UTC (1508330437)
[    1.258147] PM: Hibernation image not present or could not be loaded.
[    1.263263] Freeing unused kernel memory: 1396K
[    1.263267] Write protecting the kernel read-only data: 12288k
[    1.264550] Freeing unused kernel memory: 1980K
[    1.268473] Freeing unused kernel memory: 1240K
[    1.277053] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.305069] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.305205] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.305226] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.307068] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.307136] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.309499] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.309621] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.309775] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.309900] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.310016] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.353496] hidraw: raw HID events driver (C) Jiri Kosina
[    1.362922] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.364711] SCSI subsystem initialized
[    1.368093] libata version 3.00 loaded.
[    1.368587] ACPI: bus type USB registered
[    1.368972] i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A
[    1.368975] i801_smbus 0000:00:1f.1: PCI INT A: not connected
[    1.369041] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[    1.369065] i801_smbus 0000:00:1f.1: Failed to allocate irq -2147483648: -107
[    1.369074] i801_smbus 0000:00:1f.1: SMBus using polling
[    1.369317] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffb50a40ca1000, 70:85:c2:24:3a:ec, XID 0c900800 IRQ 371
[    1.369320] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.370084] usbcore: registered new interface driver usbfs
[    1.370104] usbcore: registered new interface driver hub
[    1.370139] usbcore: registered new device driver usb
[    1.370403] thermal LNXTHERM:00: registered as thermal_zone0
[    1.370406] ACPI: Thermal Zone [TZ01] (28 C)
[    1.373059] ahci 0000:00:12.0: version 3.0
[    1.376581] SSE version of gcm_enc/dec engaged.
[    1.383525] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.383529] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst
[    1.384414] scsi host0: ahci
[    1.384635] scsi host1: ahci
[    1.384741] ata1: SATA max UDMA/133 abar m2048@0x91317000 port 0x91317100 irq 372
[    1.384745] ata2: SATA max UDMA/133 abar m2048@0x91317000 port 0x91317180 irq 372
[    1.385861] xhci_hcd 0000:00:15.0: xHCI Host Controller
[    1.385876] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[    1.387002] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
[    1.387009] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[    1.387814] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.387817] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.387818] usb usb1: Product: xHCI Host Controller
[    1.387820] usb usb1: Manufacturer: Linux 4.9.0-4-amd64 xhci-hcd
[    1.387821] usb usb1: SerialNumber: 0000:00:15.0
[    1.388050] hub 1-0:1.0: USB hub found
[    1.388508] hub 1-0:1.0: 8 ports detected
[    1.389786] xhci_hcd 0000:00:15.0: xHCI Host Controller
[    1.389793] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[    1.390256] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.390258] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.390260] usb usb2: Product: xHCI Host Controller
[    1.390261] usb usb2: Manufacturer: Linux 4.9.0-4-amd64 xhci-hcd
[    1.390263] usb usb2: SerialNumber: 0000:00:15.0
[    1.390492] hub 2-0:1.0: USB hub found
[    1.390513] hub 2-0:1.0: 7 ports detected
[    1.395914] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.395919] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    1.397063] scsi host2: ahci
[    1.397380] scsi host3: ahci
[    1.397665] scsi host4: ahci
[    1.397905] scsi host5: ahci
[    1.397989] ata3: SATA max UDMA/133 abar m2048@0x91110000 port 0x91110100 irq 373
[    1.397991] ata4: SATA max UDMA/133 abar m2048@0x91110000 port 0x91110180 irq 373
[    1.397995] ata5: SATA max UDMA/133 abar m2048@0x91110000 port 0x91110200 irq 373
[    1.398000] ata6: SATA max UDMA/133 abar m2048@0x91110000 port 0x91110280 irq 373
[    1.409594] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    1.708267] ata2: SATA link down (SStatus 4 SControl 300)
[    1.712457] ata5: SATA link down (SStatus 0 SControl 300)
[    1.712491] ata6: SATA link down (SStatus 0 SControl 300)
[    1.716276] usb 1-8: new high-speed USB device number 2 using xhci_hcd
[    1.858131] usb 1-8: New USB device found, idVendor=05e3, idProduct=0608
[    1.858136] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.858139] usb 1-8: Product: USB2.0 Hub
[    1.859229] hub 1-8:1.0: USB hub found
[    1.859656] hub 1-8:1.0: 4 ports detected
[    1.864311] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.866203] ata1.00: ATA-9: C6308, Q0111A, max UDMA/133
[    1.866208] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.872309] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.872340] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.877705] ata1.00: configured for UDMA/133
[    1.878550] scsi 0:0:0:0: Direct-Access     ATA      C6308            1A   PQ: 0 ANSI: 5
[    2.003157] ata4.00: ATA-8: TOSHIBA HDWQ140, FJ1M, max UDMA/100
[    2.003163] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.005638] ata4.00: configured for UDMA/100
[    2.008520] ata3.00: ATA-8: TOSHIBA HDWQ140, FJ1M, max UDMA/100
[    2.008525] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.010988] ata3.00: configured for UDMA/100
[    2.011829] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA HDWQ140  FJ1M PQ: 0 ANSI: 5
[    2.041674] scsi 3:0:0:0: Direct-Access     ATA      TOSHIBA HDWQ140  FJ1M PQ: 0 ANSI: 5
[    2.091051] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    2.092132] sd 0:0:0:0: [sda] Write Protect is off
[    2.092140] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.092241] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.092662] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    2.092897] sd 2:0:0:0: [sdb] Write Protect is off
[    2.092904] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.092988] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.093054] sd 3:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    2.093251] sd 3:0:0:0: [sdc] Write Protect is off
[    2.093257] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.093338] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.097344]  sda: sda1 sda2 sda3
[    2.098126] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.248293] tsc: Refined TSC clocksource calibration: 1497.600 MHz
[    2.248309] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159647815e3, max_idle_ns: 440795269835 ns
[    2.337297]  sdc: sdc1
[    2.337332]  sdb: sdb1
[    2.338256] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[    2.338434] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    2.388116] random: fast init done
[    2.526251] PM: Starting manual resume from disk
[    2.526257] PM: Hibernation image partition 8:3 present
[    2.526259] PM: Looking for hibernation image.
[    2.526683] PM: Image not found (code -22)
[    2.526685] PM: Hibernation image not present or could not be loaded.
[    2.646905] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.854167] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.929727] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.930004] systemd[1]: Detected architecture x86-64.
[    2.930514] systemd[1]: Set hostname to <Kouyunjik>.
[    3.107278] systemd[1]: Listening on udev Control Socket.
[    3.107516] systemd[1]: Listening on udev Kernel Socket.
[    3.107630] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.107747] systemd[1]: Listening on Journal Socket.
[    3.107888] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.108280] systemd[1]: Created slice System Slice.
[    3.109505] systemd[1]: Mounting Huge Pages File System...
[    3.147584] EXT4-fs (sda2): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[    3.158003] RPC: Registered named UNIX socket transport module.
[    3.158005] RPC: Registered udp transport module.
[    3.158006] RPC: Registered tcp transport module.
[    3.158007] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.161704] lp: driver loaded but no devices found
[    3.164619] ppdev: user-space parallel port driver
[    3.211341] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.276431] clocksource: Switched to clocksource tsc
[    3.345296] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    3.345304] ACPI: Power Button [PWRB]
[    3.397697] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.409861] EFI Variables Facility v0.08 2004-May-17
[    3.426944] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.428411] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.428862] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    3.440608] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    3.449508] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.449511] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.449512] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.449512] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.449513] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.450063] [drm] Initialized
[    3.456621] pstore: using zlib compression
[    3.456646] pstore: Registered efi as persistent store backend
[    3.510134] [drm] Memory usable by graphics device = 4096M
[    3.510139] [drm] Replacing VGA console driver
[    3.510314] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.510315] [drm] Driver supports precise vblank timestamp query.
[    3.514797] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.517910] i915 0000:00:02.0: firmware: direct-loading firmware i915/bxt_dmc_ver1_07.bin
[    3.518156] [drm] Finished loading i915/bxt_dmc_ver1_07.bin (v1.7)
[    3.549822] intel_rapl: Found RAPL domain package
[    3.549827] intel_rapl: Found RAPL domain core
[    3.549831] intel_rapl: Found RAPL domain uncore
[    3.549834] intel_rapl: Found RAPL domain dram
[    3.571434] Adding 31022076k swap on /dev/sda3.  Priority:-1 extents:1 across:31022076k SSFS
[    3.669768] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    3.671751] XFS (sdb1): Mounting V5 Filesystem
[    3.671856] XFS (sdc1): Mounting V5 Filesystem
[    3.757868] random: crng init done
[    3.783474] XFS (sdb1): Ending clean mount
[    3.790741] XFS (sdc1): Ending clean mount
[    3.859029] aufs: loading out-of-tree module taints kernel.
[    3.863201] aufs 4.9-20161219
[    3.938500] systemd-journald[217]: Received request to flush runtime journal from PID 1
[    4.038274] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    4.078388] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[    4.210470] r8169 0000:01:00.0 enp1s0: link down
[    4.210608] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    4.523438] [drm] failed to retrieve link info, disabling eDP
[    4.524696] [drm] GuC firmware load skipped
[    4.529021] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.529815] acpi device:10: registered as cooling_device6
[    4.529909] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    4.530199] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.530208] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    4.531508] i915 0000:00:02.0: No connectors reported connected with modes
[    4.531514] [drm] Cannot find any crtc or sizes - going 1024x768
[    4.532659] fbcon: inteldrmfb (fb0) is primary device
[    4.540891] Console: switching to colour frame buffer device 128x48
[    4.544282] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.584169] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    4.584187] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    4.584189] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.584190] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.584192] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.584195] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    4.584196] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    4.584198] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    4.585242] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[    4.585281] NFSD: starting 90-second grace period (net ffffffff876d6480)
[    4.645283] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input6
[    4.645448] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7
[    4.645555] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
[    4.645667] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
[    4.645777] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
[    4.645890] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
[    5.865238] [drm] RC6 on
[    6.885443] r8169 0000:01:00.0 enp1s0: link up
[    6.885462] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[   37.354204] Bluetooth: Core ver 2.22
[   37.354230] NET: Registered protocol family 31
[   37.354232] Bluetooth: HCI device and connection manager initialized
[   37.354238] Bluetooth: HCI socket layer initialized
[   37.354241] Bluetooth: L2CAP socket layer initialized
[   37.354249] Bluetooth: SCO socket layer initialized
[  251.607846] ahci 0000:00:12.0: port does not support device sleep
[  300.042631] mce: [Hardware Error]: Machine check events logged
[72378.715750] device-mapper: uevent: version 1.0.3
[72378.716058] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[72380.704600] JFS: nTxBlock = 8192, nTxLock = 65536
[72380.720250] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[72380.737517] QNX4 filesystem 0.2.3 registered.
[72380.814115] raid6: sse2x1   gen()  4633 MB/s
[72380.882109] raid6: sse2x1   xor()  2899 MB/s
[72380.950110] raid6: sse2x2   gen()  5587 MB/s
[72381.018106] raid6: sse2x2   xor()  3439 MB/s
[72381.086106] raid6: sse2x4   gen()  6394 MB/s
[72381.154111] raid6: sse2x4   xor()  2451 MB/s
[72381.154113] raid6: using algorithm sse2x4 gen() 6394 MB/s
[72381.154114] raid6: .... xor() 2451 MB/s, rmw enabled
[72381.154115] raid6: using ssse3x2 recovery algorithm
[72381.161363] xor: measuring software checksum speed
[72381.198106]    prefetch64-sse:  8049.000 MB/sec
[72381.238104]    generic_sse:  7288.000 MB/sec
[72381.238105] xor: using function: prefetch64-sse (8049.000 MB/sec)
[72381.256249] Btrfs loaded, crc32c=crc32c-intel
[72381.261813] fuse init (API version 7.26)
Last edited by Morning Song on 2017-10-19 08:20, edited 1 time in total.
Top
Morning Song
Posts: 3
Joined: 2017-10-19 07:54

Re: Non-fatal Machine Check Exception on every reboot?

#2 Post by Morning Song »

lshw output:

Code: Select all

kouyunjik
    description: Desktop Computer
    product: To Be Filled By O.E.M. (To Be Filled By O.E.M.)
    vendor: To Be Filled By O.E.M.
    version: To Be Filled By O.E.M.
    serial: To Be Filled By O.E.M.
    width: 64 bits
    capabilities: smbios-3.0 dmi-3.0 smp vsyscall32
    configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009
  *-core
       description: Motherboard
       product: J3455M
       vendor: ASRock
       physical id: 0
       serial: M80-69018500433
     *-firmware
          description: BIOS
          vendor: American Megatrends Inc.
          physical id: 0
          version: P1.40
          date: 07/14/2017
          size: 64KiB
          capacity: 8128KiB
          capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
     *-memory
          description: System Memory
          physical id: f
          slot: System board or motherboard
          size: 8GiB
        *-bank:0
             description: DIMM DDR3 Synchronous 1333 MHz (0.8 ns)
             product: F3-10666CL7-4GBXH
             vendor: Unde
             physical id: 0
             serial: 00000000
             slot: ChannelA-DIMM0
             size: 4GiB
             width: 64 bits
             clock: 1333MHz (0.8ns)
        *-bank:1
             description: DIMM DDR3 Synchronous 1333 MHz (0.8 ns)
             vendor: Fujitsu
             physical id: 1
             serial: 00000000
             slot: ChannelA-DIMM1
             size: 4GiB
             width: 64 bits
             clock: 1333MHz (0.8ns)
     *-cache:0
          description: L1 cache
          physical id: 13
          slot: CPU Internal L1
          size: 224KiB
          capacity: 224KiB
          capabilities: synchronous internal write-back
          configuration: level=1
     *-cache:1
          description: L2 cache
          physical id: 14
          slot: CPU Internal L2
          size: 2MiB
          capacity: 2MiB
          capabilities: synchronous internal write-back unified
          configuration: level=2
     *-cpu
          description: CPU
          product: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz
          vendor: Intel Corp.
          physical id: 15
          bus info: cpu@0
          version: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz
          slot: CPUSocket
          size: 2221MHz
          capacity: 2416MHz
          width: 64 bits
          clock: 100MHz
          capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm 3dnowprefetch intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust smep erms mpx rdseed smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts cpufreq
          configuration: cores=4 enabledcores=4 threads=4
     *-pci
          description: Host bridge
          product: Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Host Bridge
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 0b
          width: 32 bits
          clock: 33MHz
        *-display
             description: VGA compatible controller
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 0b
             width: 64 bits
             clock: 33MHz
             capabilities: pciexpress msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             resources: irq:376 memory:90000000-90ffffff memory:80000000-8fffffff ioport:f000(size=64) memory:c0000-dffff
        *-multimedia UNCLAIMED
             description: Audio device
             product: Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Audio Cluster
             vendor: Intel Corporation
             physical id: e
             bus info: pci@0000:00:0e.0
             version: 0b
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi pciexpress cap_list
             configuration: latency=0
             resources: memory:91310000-91313fff memory:91000000-910fffff
        *-communication
             description: Communication controller
             product: Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Trusted Execution Engine
             vendor: Intel Corporation
             physical id: f
             bus info: pci@0000:00:0f.0
             version: 0b
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=mei_me latency=0
             resources: irq:375 memory:9131b000-9131bfff
        *-storage
             description: SATA controller
             product: Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series SATA AHCI Controller
             vendor: Intel Corporation
             physical id: 12
             bus info: pci@0000:00:12.0
             version: 0b
             width: 32 bits
             clock: 66MHz
             capabilities: storage msi pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             resources: irq:372 memory:91314000-91315fff memory:91318000-913180ff ioport:f090(size=8) ioport:f080(size=4) ioport:f060(size=32) memory:91317000-913177ff
        *-pci:0
             description: PCI bridge
             product: Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A #1
             vendor: Intel Corporation
             physical id: 13
             bus info: pci@0000:00:13.0
             version: fb
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:367 ioport:e000(size=4096) memory:91200000-912fffff
           *-network
                description: Ethernet interface
                product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:01:00.0
                logical name: enp1s0
                version: 06
                serial: 70:85:c2:24:3a:ec
                size: 1Gbit/s
                capacity: 1Gbit/s
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.42 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
                resources: irq:371 ioport:e000(size=256) memory:91204000-91204fff memory:91200000-91203fff
        *-pci:1
             description: PCI bridge
             product: Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A #2
             vendor: Intel Corporation
             physical id: 13.1
             bus info: pci@0000:00:13.1
             version: fb
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:368 ioport:d000(size=4096) memory:91100000-911fffff
           *-storage
                description: SATA controller
                product: Marvell Technology Group Ltd.
                vendor: Marvell Technology Group Ltd.
                physical id: 0
                bus info: pci@0000:02:00.0
                version: 11
                width: 32 bits
                clock: 33MHz
                capabilities: storage pm msi pciexpress ahci_1.0 bus_master cap_list rom
                configuration: driver=ahci latency=0
                resources: irq:373 ioport:d050(size=8) ioport:d040(size=4) ioport:d030(size=8) ioport:d020(size=4) ioport:d000(size=32) memory:91110000-911107ff memory:91100000-9110ffff
        *-pci:2
             description: PCI bridge
             product: Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A #3
             vendor: Intel Corporation
             physical id: 13.2
             bus info: pci@0000:00:13.2
             version: fb
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:369
        *-pci:3
             description: PCI bridge
             product: Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A #4
             vendor: Intel Corporation
             physical id: 13.3
             bus info: pci@0000:00:13.3
             version: fb
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:370
        *-usb
             description: USB controller
             product: Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series USB xHCI
             vendor: Intel Corporation
             physical id: 15
             bus info: pci@0000:00:15.0
             version: 0b
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi xhci cap_list
             configuration: driver=xhci_hcd latency=0
             resources: irq:374 memory:91300000-9130ffff
           *-usbhost:0
                product: xHCI Host Controller
                vendor: Linux 4.9.0-4-amd64 xhci-hcd
                physical id: 0
                bus info: usb@1
                logical name: usb1
                version: 4.09
                capabilities: usb-2.00
                configuration: driver=hub slots=8 speed=480Mbit/s
              *-usb
                   description: USB hub
                   product: USB2.0 Hub
                   vendor: Genesys Logic, Inc.
                   physical id: 8
                   bus info: usb@1:8
                   version: 88.32
                   capabilities: usb-2.00
                   configuration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
           *-usbhost:1
                product: xHCI Host Controller
                vendor: Linux 4.9.0-4-amd64 xhci-hcd
                physical id: 1
                bus info: usb@2
                logical name: usb2
                version: 4.09
                capabilities: usb-3.00
                configuration: driver=hub slots=7 speed=5000Mbit/s
        *-isa
             description: ISA bridge
             product: Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Low Pin Count Interface
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 0b
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master
             configuration: latency=0
        *-serial
             description: SMBus
             product: Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.1
             bus info: pci@0000:00:1f.1
             version: 0b
             width: 64 bits
             clock: 33MHz
             configuration: driver=i801_smbus latency=0
             resources: irq:-2147483648 memory:91316000-913160ff ioport:f040(size=32)
     *-scsi:0
          physical id: 1
          logical name: scsi0
          capabilities: emulated
        *-disk
             description: ATA Disk
             product: C6308
             physical id: 0.0.0
             bus info: scsi@0:0.0.0
             logical name: /dev/sda
             version: 1A
             serial: 1733013401025
             size: 59GiB (64GB)
             capabilities: gpt-1.00 partitioned partitioned:gpt
             configuration: ansiversion=5 guid=9e02a9e2-c6a2-4771-ae78-0a268272f117 logicalsectorsize=512 sectorsize=512
           *-volume:0
                description: Windows FAT volume
                vendor: mkfs.fat
                physical id: 1
                bus info: scsi@0:0.0.0,1
                logical name: /dev/sda1
                logical name: /boot/efi
                version: FAT32
                serial: 24fc-2b04
                size: 241MiB
                capacity: 242MiB
                capabilities: boot fat initialized
                configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro name=EFI state=mounted
           *-volume:1
                description: EXT4 volume
                vendor: Linux
                physical id: 2
                bus info: scsi@0:0.0.0,2
                logical name: /dev/sda2
                logical name: /
                version: 1.0
                serial: c3875552-8db0-48ad-9b36-d7512d3f6dc6
                size: 29GiB
                capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                configuration: created=2017-10-13 16:52:15 filesystem=ext4 label=root lastmountpoint=/ modified=2017-10-18 08:40:38 mount.fstype=ext4 mount.options=rw,noatime,nodiratime,discard,errors=remount-ro,data=ordered mounted=2017-10-18 08:40:39 name=root state=mounted
           *-volume:2
                description: Linux swap volume
                vendor: Linux
                physical id: 3
                bus info: scsi@0:0.0.0,3
                logical name: /dev/sda3
                version: 1
                serial: eb8a9ff9-538f-42ac-aa26-d36597e5e121
                size: 29GiB
                capacity: 29GiB
                capabilities: nofs swap initialized
                configuration: filesystem=swap name=swap pagesize=4095
     *-scsi:1
          physical id: 2
          logical name: scsi2
          capabilities: emulated
        *-disk
             description: ATA Disk
             product: TOSHIBA HDWQ140
             vendor: Toshiba
             physical id: 0.0.0
             bus info: scsi@2:0.0.0
             logical name: /dev/sdb
             version: FJ1M
             serial: 47U3Y05LFPBE
             size: 3726GiB (4TB)
             capabilities: removable
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
           *-medium
                physical id: 0
                logical name: /dev/sdb
                size: 3726GiB (4TB)
                capabilities: gpt-1.00 partitioned partitioned:gpt
                configuration: guid=f424b27e-9b88-4bb2-8fa4-f5c05be09088
              *-volume
                   description: EFI partition
                   physical id: 1
                   logical name: /dev/sdb1
                   logical name: /mnt/disk1
                   serial: cd61d45b-214a-4796-b51b-e343b50f6b61
                   capacity: 3726GiB
                   configuration: mount.fstype=xfs mount.options=rw,nosuid,nodev,noatime,attr2,inode64,noquota name=disk1 state=mounted
     *-scsi:2
          physical id: 3
          logical name: scsi3
          capabilities: emulated
        *-disk
             description: ATA Disk
             product: TOSHIBA HDWQ140
             vendor: Toshiba
             physical id: 0.0.0
             bus info: scsi@3:0.0.0
             logical name: /dev/sdc
             version: FJ1M
             serial: 47U4Y099FPBE
             size: 3726GiB (4TB)
             capabilities: removable
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
           *-medium
                physical id: 0
                logical name: /dev/sdc
                size: 3726GiB (4TB)
                capabilities: gpt-1.00 partitioned partitioned:gpt
                configuration: guid=ddcf50e5-9aae-45ee-af68-3924e4787f54
              *-volume
                   description: EFI partition
                   physical id: 1
                   logical name: /dev/sdc1
                   logical name: /mnt/disk2
                   serial: 2004a44a-a879-42d3-a28d-f0dca57775d6
                   capacity: 3726GiB
                   configuration: mount.fstype=xfs mount.options=rw,nosuid,nodev,noatime,attr2,inode64,noquota name=disk2 state=mounted
lspci -vv output

Code: Select all

00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Host Bridge (rev 0b)
        Subsystem: ASRock Incorporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Host Bridge
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:02.0 VGA compatible controller: Intel Corporation Device 5a85 (rev 0b) (prog-if 00 [VGA controller])
        Subsystem: ASRock Incorporation Device 5a85
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 376
        Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
        Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at f000 [size=64]
        [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: [40] Vendor Specific Information: Len=0c <?>
        Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
        Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00018  Data: 0000
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D3 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100 v1] Process Address Space ID (PASID)
                PASIDCap: Exec+ Priv-, Max PASID Width: 14
                PASIDCtl: Enable- Exec- Priv-
        Capabilities: [200 v1] Address Translation Service (ATS)
                ATSCap: Invalidate Queue Depth: 00
                ATSCtl: Enable-, Smallest Translation Unit: 00
        Capabilities: [300 v1] Page Request Interface (PRI)
                PRICtl: Enable- Reset-
                PRISta: RF- UPRGI- Stopped-
                Page Request Capacity: 00008000, Page Request Allocation: 00000000
        Kernel driver in use: i915
        Kernel modules: i915

00:0e.0 Audio device: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Audio Cluster (rev 0b)
        Subsystem: ASRock Incorporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Audio Cluster
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 25
        Region 0: Memory at 91310000 (64-bit, non-prefetchable) [size=16K]
        Region 4: Memory at 91000000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] Vendor Specific Information: Len=14 <?>
        Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
        Kernel modules: snd_hda_intel, snd_soc_skl

00:0f.0 Communication controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Trusted Execution Engine (rev 0b)
        Subsystem: ASRock Incorporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Trusted Execution Engine
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 375
        Region 0: Memory at 9131b000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee003b8  Data: 0000
        Capabilities: [a4] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:12.0 SATA controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series SATA AHCI Controller (rev 0b) (prog-if 01 [AHCI 1.0])
        Subsystem: ASRock Incorporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series SATA AHCI Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 372
        Region 0: Memory at 91314000 (32-bit, non-prefetchable) [size=8K]
        Region 1: Memory at 91318000 (32-bit, non-prefetchable) [size=256]
        Region 2: I/O ports at f090 [size=8]
        Region 3: I/O ports at f080 [size=4]
        Region 4: I/O ports at f060 [size=32]
        Region 5: Memory at 91317000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00338  Data: 0000
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
        Kernel driver in use: ahci
        Kernel modules: ahci

00:13.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A #1 (rev fb) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 367
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: 91200000-912fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM not supported, Exit Latency L0s <1us, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                        Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00218  Data: 0000
        Capabilities: [90] Subsystem: ASRock Incorporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A
        Capabilities: [a0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100 v0] #00
        Capabilities: [140 v1] Access Control Services
                ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
                ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
        Capabilities: [150 v0] #00
        Capabilities: [200 v1] L1 PM Substates
                L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
                          PortCommonModeRestoreTime=40us PortTPowerOnTime=10us
                L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
                           T_CommonMode=0us LTR1.2_Threshold=0ns
                L1SubCtl2: T_PwrOn=10us
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:13.1 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A #2 (rev fb) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 368
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: 91100000-911fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM not supported, Exit Latency L0s <1us, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                        Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00258  Data: 0000
        Capabilities: [90] Subsystem: ASRock Incorporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A
        Capabilities: [a0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100 v0] #00
        Capabilities: [140 v1] Access Control Services
                ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
                ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
        Capabilities: [150 v0] #00
        Capabilities: [200 v1] L1 PM Substates
                L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
                          PortCommonModeRestoreTime=40us PortTPowerOnTime=10us
                L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
                           T_CommonMode=0us LTR1.2_Threshold=0ns
                L1SubCtl2: T_PwrOn=10us
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:13.2 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A #3 (rev fb) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 369
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #5, Speed 5GT/s, Width x1, ASPM not supported, Exit Latency L0s <1us, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train+ SlotClk+ DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                        Slot #4, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00298  Data: 0000
        Capabilities: [90] Subsystem: ASRock Incorporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A
        Capabilities: [a0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [100 v0] #00
        Capabilities: [140 v1] Access Control Services
                ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
                ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
        Capabilities: [150 v0] #00
        Capabilities: [200 v1] L1 PM Substates
                L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
                          PortCommonModeRestoreTime=40us PortTPowerOnTime=10us
                L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
                           T_CommonMode=0us LTR1.2_Threshold=0ns
                L1SubCtl2: T_PwrOn=10us
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:13.3 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A #4 (rev fb) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 370
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #6, Speed 5GT/s, Width x1, ASPM not supported, Exit Latency L0s <1us, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train+ SlotClk+ DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                        Slot #5, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee002d8  Data: 0000
        Capabilities: [90] Subsystem: ASRock Incorporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series PCI Express Port A
        Capabilities: [a0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [100 v0] #00
        Capabilities: [140 v1] Access Control Services
                ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
                ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
        Capabilities: [150 v0] #00
        Capabilities: [200 v1] L1 PM Substates
                L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
                          PortCommonModeRestoreTime=40us PortTPowerOnTime=10us
                L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
                           T_CommonMode=0us LTR1.2_Threshold=0ns
                L1SubCtl2: T_PwrOn=10us
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:15.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series USB xHCI (rev 0b) (prog-if 30 [XHCI])
        Subsystem: ASRock Incorporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series USB xHCI
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 374
        Region 0: Memory at 91300000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [70] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
                Address: 00000000fee00398  Data: 0000
        Capabilities: [90] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Low Pin Count Interface (rev 0b)
        Subsystem: ASRock Incorporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series Low Pin Count Interface
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:1f.1 SMBus: Intel Corporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series SMBus Controller (rev 0b)
        Subsystem: ASRock Incorporation Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series SMBus Controller
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ -2147483648
        Region 0: Memory at 91316000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at f040 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
        Subsystem: ASRock Incorporation Motherboard (one of many)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 371
        Region 0: I/O ports at e000 [size=256]
        Region 2: Memory at 91204000 (64-bit, non-prefetchable) [size=4K]
        Region 4: Memory at 91200000 (64-bit, prefetchable) [size=16K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee002f8  Data: 0000
        Capabilities: [70] Express (v2) Endpoint, MSI 01
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 4096 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00000800
        Capabilities: [d0] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Input/output error
                Not readable
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [140 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
        Kernel driver in use: r8169
        Kernel modules: r8169

02:00.0 SATA controller: Marvell Technology Group Ltd. Device 9215 (rev 11) (prog-if 01 [AHCI 1.0])
        Subsystem: Marvell Technology Group Ltd. Device 9215
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 373
        Region 0: I/O ports at d050 [size=8]
        Region 1: I/O ports at d040 [size=4]
        Region 2: I/O ports at d030 [size=8]
        Region 3: I/O ports at d020 [size=4]
        Region 4: I/O ports at d000 [size=32]
        Region 5: Memory at 91110000 (32-bit, non-prefetchable) [size=2K]
        Expansion ROM at 91100000 [disabled] [size=64K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00358  Data: 0000
        Capabilities: [70] Express (v2) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [e0] SATA HBA v0.0 BAR4 Offset=00000004
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
        Kernel driver in use: ahci
        Kernel modules: ahci
lsusb -vv output

Code: Select all


Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         3
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            4.09
  iManufacturer           3 Linux 4.9.0-4-amd64 xhci-hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:00:15.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0
Hub Descriptor:
  bLength              12
  bDescriptorType      42
  nNbrPorts             7
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  bHubDecLat          0.0 micro seconds
  wHubDelay             0 nano seconds
  DeviceRemovable    0x00
 Hub Port Status:
   Port 1: 0000.02a0 5Gbps power Rx.Detect
   Port 2: 0000.02a0 5Gbps power Rx.Detect
   Port 3: 0000.02a0 5Gbps power Rx.Detect
   Port 4: 0000.02a0 5Gbps power Rx.Detect
   Port 5: 0000.02a0 5Gbps power Rx.Detect
   Port 6: 0000.02a0 5Gbps power Rx.Detect
   Port 7: 0000.02a0 5Gbps power Rx.Detect
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           15
  bNumDeviceCaps          1
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x02
      Latency Tolerance Messages (LTM) Supported
    wSpeedsSupported   0x0008
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   3
      Lowest fully-functional device speed is SuperSpeed (5Gbps)
    bU1DevExitLat          10 micro seconds
    bU2DevExitLat         512 micro seconds
Device Status:     0x0001
  Self Powered

Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x05e3 Genesys Logic, Inc.
  idProduct          0x0608 Hub
  bcdDevice           88.32
  iManufacturer           0
  iProduct                1 USB2.0 Hub
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x00e9
    Per-port power switching
    Per-port overcurrent protection
    TT think time 32 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.09
  iManufacturer           3 Linux 4.9.0-4-amd64 xhci-hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:00:15.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength              11
  bDescriptorType      41
  nNbrPorts             8
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00 0x00
  PortPwrCtrlMask    0xff 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
   Port 7: 0000.0100 power
   Port 8: 0000.0507 highspeed power suspend enable connect
Device Status:     0x0001
  Self Powered
Top
User avatar
Thorny
Posts: 542
Joined: 2011-02-27 13:40

Re: Non-fatal Machine Check Exception on every reboot?

#3 Post by Thorny »

When I use a search engine to look for the report from your system.

Code: Select all

failed to prefill DIMM database from DMI data
From the mcelog Frequently Asked Quiestions.
http://www.mcelog.org/faq.html#9
I get "failed to prefill DIMM database from DMI data"
This is a harmless warning message. The DIMM database prefill relies on a specific non-standard format of the DIMMs in the DMI BIOS tables. If this format is not used by the BIOS mcelog will only discover DIMMs as they get their first error (iff the CPU reports DIMMs in machine check errors).
More there too, which you might want to read
Top
Morning Song
Posts: 3
Joined: 2017-10-19 07:54

Re: Non-fatal Machine Check Exception on every reboot?

#4 Post by Morning Song »

Yeah, I'm not too concerned about the DMI stuff; I found the same page in my own googling before I came here. But the log also contains lines like like "Hardware event: This is not a software error" and "Processor state corrupt", which seemed a little more threatening.
Top
User avatar
Thorny
Posts: 542
Joined: 2011-02-27 13:40

Re: Non-fatal Machine Check Exception on every reboot?

#5 Post by Thorny »

Morning Song wrote:... I found the same page in my own googling before I came here. But the log also contains lines like like "Hardware event: This is not a software error" and "Processor state corrupt", which seemed a little more threatening.
Well, also from that FAQ:
On what systems does DMI DIMM decoding work?
DMI DIMM decoding currently only works on Intel Xeon 55xx, 56xx, E5 (Romley) systems It also requires the DMI BIOS to report the DIMMs in a specific non-standardized format, which may not be available in all systems. The DIMMs will also be only reported when mcelog recognizes the CPU and the CPU supplies the necessary data.
So, the description of "hardware error" seems to be sane, at least in the sense of, the hardware doesn't do that. :-)

You should really always mention what you already know when posing a question. It doesn't make sense for us or you to have to cover already covered ground.
Top
Post Reply

Return to “Hardware”