Last Friday I had a boot problem and my OS wouldn't load. It was giving Unexpected Inconsistency Run fsck Manually. I did and P1 was repaired and the OS loaded, granted some apps were corrupt. When I did smartctl on the drive it was reporting fine. Now n1p2 is having an issue.
Code: Select all
/dev/nvme0n1p2: Unexpected Inconsistency; Run fsck Manually.
[Buffer I/O Error on dev nvme0n
Code: Select all
nvme nvme0: Device not ready; aborting initialisation
Is it just a cascading error in the file system
Should I just nuke the machine and start over?
Or is there a good way to stem the problem?
Screenshots of the current error: https://1drv.ms/f/s!AtItXRNac1nKhpZmKneTiOe6xvLWVg
Code: Select all
root@Pixy-PC:~# sudo smartctl -a /dev/nvme0
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-6-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: Force MP500
Serial Number: 17127956000123380135
Firmware Version: E7FM02.1
PCI Vendor/Subsystem ID: 0x1987
IEEE OUI Identifier: 0x6479a7
Controller ID: 0
Number of Namespaces: 1
Namespace 1 Size/Capacity: 120,034,123,776 [120 GB]
Namespace 1 Formatted LBA Size: 512
Local Time is: Fri May 4 09:14:49 2018 CDT
Firmware Updates (0x02): 1 Slot
Optional Admin Commands (0x0007): Security Format Frmw_DL
Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 110 Celsius
Critical Comp. Temp. Threshold: 130 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 7.90W - - 0 0 0 0 0 0
1 + 2.40W - - 1 1 1 1 600 600
2 + 1.90W - - 2 2 2 2 600 600
3 - 0.1100W - - 3 3 3 3 600 600
4 - 0.0050W - - 4 4 4 4 100000 160000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 1
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff)
Critical Warning: 0x00
Temperature: 45 Celsius
Available Spare: 100%
Available Spare Threshold: 0%
Percentage Used: 2%
Data Units Read: 3,044,091 [1.55 TB]
Data Units Written: 6,453,922 [3.30 TB]
Host Read Commands: 77,758,445
Host Write Commands: 174,001,563
Controller Busy Time: 0
Power Cycles: 34
Power On Hours: 7,214
Unsafe Shutdowns: 10
Media and Data Integrity Errors: 2,874
Error Information Log Entries: 2,874
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 2: 59 Celsius
Error Information (NVMe Log 0x01, max 64 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS
0 2874 1 0x029b 0x4502 - 4294967288 1 -
1 2873 1 0x029b 0x4502 - 4294967288 1 -
2 2872 1 0x029b 0x4502 - 4294967288 1 -
3 2871 1 0x029b 0x4502 - 4294967288 1 -
4 2870 1 0x029b 0x4502 - 4294967288 1 -
5 2869 1 0x029b 0x4502 - 4294967288 1 -
6 2868 1 0x029b 0x4502 - 4294967288 1 -
7 2867 1 0x029b 0x4502 - 4294967288 1 -
8 2866 1 0x029b 0x4502 - 4294967288 1 -
9 2865 1 0x029b 0x4502 - 4294967288 1 -
10 2864 1 0x029b 0x4502 - 4294967288 1 -
11 2863 1 0x029b 0x4502 - 4294967288 1 -
12 2862 1 0x029b 0x4502 - 4294967288 1 -
13 2861 1 0x029b 0x4502 - 4294967288 1 -
14 2860 1 0x029b 0x4502 - 4294967288 1 -
15 2859 1 0x029b 0x4502 - 4294967288 1 -
... (47 entries not shown)