[Resolved] Sound not working after Buster upgrade

Getting your soundcard to work, using Debian on non-i386 hardware, etc

[Resolved] Sound not working after Buster upgrade

Postby pcdoctor01 » 2019-07-09 22:26

My sound was working in Stretch but now I have no sound after upgrading to Buster.
Alsamixer look ok.
Nothing is muted in the Alsamixer.
Any ideas why I don't have sound?
Thanks!

aplay -L
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
jack
JACK Audio Connection Kit
pulse
PulseAudio Sound Server
sysdefault:CARD=Intel
HDA Intel, ALC662 rev1 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
Front speakers
surround21:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Digital
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
Direct sample mixing device
dmix:CARD=Intel,DEV=1
HDA Intel, ALC662 rev1 Digital
Direct sample mixing device
dsnoop:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
Direct sample snooping device
dsnoop:CARD=Intel,DEV=1
HDA Intel, ALC662 rev1 Digital
Direct sample snooping device
hw:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
Direct hardware device without any conversions
hw:CARD=Intel,DEV=1
HDA Intel, ALC662 rev1 Digital
Direct hardware device without any conversions
plughw:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
Hardware device with all software conversions
plughw:CARD=Intel,DEV=1
HDA Intel, ALC662 rev1 Digital
Hardware device with all software conversions
usbstream:CARD=Intel
HDA Intel
USB Stream Output


cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xdfef8000 irq 24


lspci -k | grep -A5 Audio
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
Kernel driver in use: pcieport


lsmod | grep snd
snd_seq_dummy 16384 0
snd_hrtimer 16384 1
snd_seq 81920 2 snd_seq_dummy
snd_seq_device 16384 1 snd_seq
snd_hda_codec_realtek 122880 1
snd_hda_codec_generic 86016 1 snd_hda_codec_realtek
snd_hda_intel 45056 4
snd_hda_codec 151552 3 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec_realtek
snd_hda_core 94208 4 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 114688 4 snd_hda_intel,snd_hda_codec,snd_hda_core
snd_timer 36864 4 snd_seq,snd_hrtimer,snd_pcm
snd 94208 16 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
soundcore 16384 1 snd
Last edited by pcdoctor01 on 2019-07-10 01:53, edited 3 times in total.
pcdoctor01
 
Posts: 65
Joined: 2014-07-27 10:26

Re: Sound not working after upgrade from Stretch to Buster

Postby Deb-fan » 2019-07-09 22:47

Would install and launch pavucontrol. Look around in its settings. Ie: Anything muted, right sound card selected etc.
Deb-fan
 
Posts: 273
Joined: 2012-08-14 12:27

Re: Sound not working after upgrade from Stretch to Buster

Postby pcdoctor01 » 2019-07-09 23:18

Pavucontrol looks normal.
I'm going to boot a Debian 10 live DVD and see if I can get sound from it.
I booted a Debian 10 live DVD and when running the installer with speech synthesis, I hear sound.
So, I know this means my sound card works.

No sound when doing a speaker test.
speaker-test -c2 -l 1

speaker-test 1.1.8

Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 1048576
Period size range from 32 to 349526
Using max buffer size 1048576
Periods = 4
was set period_size = 262144
was set buffer_size = 1048576
0 - Front Left
1 - Front Right
Time per period = 12.440660
pcdoctor01
 
Posts: 65
Joined: 2014-07-27 10:26

Re: Sound not working after upgrade from Stretch to Buster

Postby Deb-fan » 2019-07-10 00:53

Dang was hoping it'd be an easy fix. Audio works during a live Buster session? This is a fully fresh install, not an upgraded Stretch? If a laptop does it have function keys that control volume-etc? What/which firmware packages are installed, non-free? Frustrating spot, keep chipping away and you'll get it.
Deb-fan
 
Posts: 273
Joined: 2012-08-14 12:27

[Resolved] Sound not working after Buster upgrade

Postby pcdoctor01 » 2019-07-10 01:50

Deb-fan wrote:Audio works during a live Buster session?
This is a fully fresh install, not an upgraded Stretch?


When the live install menu comes up, I picked speech synthesis and I heard speech during the install.
This was an upgrade from Stretch to Buster.
I ended up doing a fresh install and I have sound now.
I guess something got corrupted during the upgrade from Stretch to Buster.
I was probably too impatient and should have waited for a fix but...
Thanks so much for responding!
pcdoctor01
 
Posts: 65
Joined: 2014-07-27 10:26

Re: [Resolved] Sound not working after Buster upgrade

Postby Deb-fan » 2019-07-10 02:13

Hey good deal. Was suspecting something like that Stretch-Buster issue. Anyway cool beans, you got it sorted out. :)
Deb-fan
 
Posts: 273
Joined: 2012-08-14 12:27


Return to Hardware

Who is online

Users browsing this forum: No registered users and 9 guests

fashionable
cron