The USB stick was messed up, so I attempted to use gparted to correct it but it wouldn't modify anything. I then put it in Windows and was able to format upto about 40% before it failed. Now, my Linux machine won't even assign a block dev label to it. It's simply not coming up. The dmesg logs are telling, which I'll post below. My question to the advanced/expert level guys is, are there any tools that can work at a lower-level than /dev/sdX like flashing firmware to a PCI channel or something crazy like that?
Please help!
Here is the dmesg output...you can clearly see it's borked:
Code: Select all
[35078.615059] usb 1-4-port2: disabled by hub (EMI?), re-enabling...
[35078.615078] usb 1-4.2: USB disconnect, device number 53
[35078.615443] usblp1: removed
[35078.839010] usb 1-4.2: new high-speed USB device number 62 using xhci_hcd
[35078.941181] usb 1-4.2: New USB device found, idVendor=04f9, idProduct=0320, bcdDevice= 1.00
[35078.941192] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[35078.941198] usb 1-4.2: Product: MFC-L2740DW
[35078.941204] usb 1-4.2: Manufacturer: Brother
[35078.941210] usb 1-4.2: SerialNumber: U63889G5N432902
[35078.953337] usblp 1-4.2:1.0: usblp1: USB Bidirectional printer dev 62 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0320
[35209.544456] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[35249.616101] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[35258.174805] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[35757.527746] usb 1-4-port2: disabled by hub (EMI?), re-enabling...
[35757.527766] usb 1-4.2: USB disconnect, device number 62
[35757.528188] usblp1: removed
[35757.750757] usb 1-4.2: new high-speed USB device number 63 using xhci_hcd
[35757.852297] usb 1-4.2: New USB device found, idVendor=04f9, idProduct=0320, bcdDevice= 1.00
[35757.852301] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[35757.852303] usb 1-4.2: Product: MFC-L2740DW
[35757.852305] usb 1-4.2: Manufacturer: Brother
[35757.852306] usb 1-4.2: SerialNumber: U63889G5N432902
[35757.859465] usblp 1-4.2:1.0: usblp1: USB Bidirectional printer dev 63 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0320
[36249.087139] usb 1-2: new high-speed USB device number 64 using xhci_hcd
[36249.235339] usb 1-2: New USB device found, idVendor=abcd, idProduct=1234, bcdDevice= 1.00
[36249.235347] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36249.235352] usb 1-2: Product: UDisk
[36249.235356] usb 1-2: Manufacturer: General
[36249.235360] usb 1-2: SerialNumber: Љ
[36249.237213] usb-storage 1-2:1.0: USB Mass Storage device detected
[36249.237672] scsi host3: usb-storage 1-2:1.0
[36250.263364] scsi 3:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
[36250.264442] sd 3:0:0:0: Attached scsi generic sg1 type 0
[36250.265209] sd 3:0:0:0: [sdb] 15974400 512-byte logical blocks: (8.18 GB/7.62 GiB)
[36250.265323] sd 3:0:0:0: [sdb] Write Protect is off
[36250.265325] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[36250.265446] sd 3:0:0:0: [sdb] No Caching mode page found
[36250.265449] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[36250.274907] sdb: sdb1 sdb2
[36250.276400] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[36250.706218] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[36251.119598] EXT4-fs (sdb2): mounting ext3 file system using the ext4 subsystem
[36252.710528] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[36270.922756] JFS: nTxBlock = 8192, nTxLock = 65536
[36270.939667] NILFS version 2 loaded
[36271.005469] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[36309.424801] usb 1-2: USB disconnect, device number 64
[36309.427602] print_req_error: I/O error, dev sdb, sector 64
[36309.427622] Buffer I/O error on dev sdb1, logical block 1, lost async page write
[36309.427646] print_req_error: I/O error, dev sdb, sector 24640
[36309.427657] Buffer I/O error on dev sdb1, logical block 24577, lost async page write
[36309.507425] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[36309.520731] Buffer I/O error on dev sdb2, logical block 645, lost sync page write
[36309.520735] JBD2: Error -5 detected when updating journal superblock for sdb2-8.
[36309.520737] Aborting journal on device sdb2-8.
[36309.520739] Buffer I/O error on dev sdb2, logical block 645, lost sync page write
[36309.520740] JBD2: Error -5 detected when updating journal superblock for sdb2-8.
[36309.524695] FAT-fs (sdb1): unable to read boot sector to mark fs as dirty
[36315.684542] usb 1-2: new high-speed USB device number 65 using xhci_hcd
[36315.833096] usb 1-2: New USB device found, idVendor=abcd, idProduct=1234, bcdDevice= 1.00
[36315.833118] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36315.833130] usb 1-2: Product: UDisk
[36315.833143] usb 1-2: Manufacturer: General
[36315.833152] usb 1-2: SerialNumber: Љ
[36315.842500] usb-storage 1-2:1.0: USB Mass Storage device detected
[36315.844533] scsi host3: usb-storage 1-2:1.0
[36316.852657] scsi 3:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
[36316.852859] sd 3:0:0:0: Attached scsi generic sg1 type 0
[36316.853382] sd 3:0:0:0: [sdb] 7866368 512-byte logical blocks: (4.03 GB/3.75 GiB)
[36316.853518] sd 3:0:0:0: [sdb] Write Protect is off
[36316.853519] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[36316.853624] sd 3:0:0:0: [sdb] No Caching mode page found
[36316.853627] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[36316.859278] sdb: sdb1 sdb2
sdb2: <bsd: sdb5 >
[36316.862066] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[36317.184068] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[36329.287462] sdb: sdb1 sdb2
sdb2: <bsd: sdb5 >
[36331.421009] sdb: sdb1 sdb2
sdb2: <bsd: sdb5 >
[36425.176549] usb 1-4.1: new high-speed USB device number 66 using xhci_hcd
[36425.277160] usb 1-4.1: New USB device found, idVendor=abcd, idProduct=1234, bcdDevice= 1.00
[36425.277168] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36425.277173] usb 1-4.1: Product: UDisk
[36425.277177] usb 1-4.1: Manufacturer: General
[36425.277181] usb 1-4.1: SerialNumber: Љ
[36425.279228] usb-storage 1-4.1:1.0: USB Mass Storage device detected
[36425.280373] scsi host4: usb-storage 1-4.1:1.0
[36426.289765] scsi 4:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
[36426.290930] sd 4:0:0:0: Attached scsi generic sg2 type 0
[36426.291971] sd 4:0:0:0: [sdc] 15974400 512-byte logical blocks: (8.18 GB/7.62 GiB)
[36426.292212] sd 4:0:0:0: [sdc] Write Protect is off
[36426.292221] sd 4:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[36426.292392] sd 4:0:0:0: [sdc] No Caching mode page found
[36426.292405] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[36426.308130] sdc: sdc1 sdc2
[36426.311838] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[36433.473044] sdb: sdb1 sdb2
sdb2: <bsd: sdb5 >
[36433.482600] sdc: sdc1 sdc2
[36497.585428] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[36545.860821] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[36564.242637] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[36712.883531] usb 1-4.3: reset high-speed USB device number 6 using xhci_hcd
[36762.860798] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[37476.000929] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[37562.947714] perf: interrupt took too long (5038 > 5016), lowering kernel.perf_event_max_sample_rate to 39500
[37820.259542] INFO: task systemd-udevd:372 blocked for more than 120 seconds.
[37820.259560] Tainted: G OE 4.19.0-6-amd64 #1 Debian 4.19.67-2+deb10u1
[37820.259568] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[37820.259577] systemd-udevd D 0 372 1 0x00000324
[37820.259588] Call Trace:
[37820.259613] ? __schedule+0x2a2/0x870
[37820.259627] schedule+0x28/0x80
[37820.259637] schedule_preempt_disabled+0xa/0x10
[37820.259648] __mutex_lock.isra.8+0x2b5/0x4a0
[37820.259665] __blkdev_get+0x78/0x550
[37820.259677] ? bd_acquire+0xd0/0xd0
[37820.259686] blkdev_get+0x107/0x310
[37820.259701] ? bd_acquire+0xd0/0xd0
[37820.259710] do_dentry_open+0x13d/0x370
[37820.259719] path_openat+0x2c6/0x1480
[37820.259727] ? terminate_walk+0xe6/0x100
[37820.259737] ? seccomp_run_filters+0x5c/0xb0
[37820.259746] do_filp_open+0x93/0x100
[37820.259835] ? _cond_resched+0x15/0x30
[37820.259846] ? __check_object_size+0x15d/0x189
[37820.259872] ? __check_object_size+0x15d/0x189
[37820.259939] do_sys_open+0x186/0x210
[37820.259967] do_syscall_64+0x53/0x110
[37820.259992] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[37820.260009] RIP: 0033:0x7f1bd59141ae
[37820.260029] Code: Bad RIP value.
[37820.260045] RSP: 002b:00007ffd08381f00 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[37820.260060] RAX: ffffffffffffffda RBX: 00007ffd08383040 RCX: 00007f1bd59141ae
[37820.260064] RDX: 00000000000a0800 RSI: 0000560b6ad1db00 RDI: 00000000ffffff9c
[37820.260068] RBP: 0000000000000000 R08: 0000560b6ac5b140 R09: 0000560b6ace6920
[37820.260072] R10: 0000000000000000 R11: 0000000000000246 R12: 0000560b6ad8b830
[37820.260076] R13: 0000000000000000 R14: 00007ffd08383008 R15: 0000560b6ac62ac0
[37843.809047] usb 1-2: USB disconnect, device number 65
[37846.066710] usb 1-2: new high-speed USB device number 67 using xhci_hcd
[37846.215278] usb 1-2: New USB device found, idVendor=abcd, idProduct=1234, bcdDevice= 1.00
[37846.215288] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[37846.215295] usb 1-2: Product: UDisk
[37846.215301] usb 1-2: Manufacturer: General
[37846.215306] usb 1-2: SerialNumber: Љ
[37846.220434] usb-storage 1-2:1.0: USB Mass Storage device detected
[37846.238857] scsi host3: usb-storage 1-2:1.0
[37847.267410] scsi 3:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
[37847.268397] sd 3:0:0:0: Attached scsi generic sg1 type 0
[37847.268653] sd 3:0:0:0: [sdb] 7866368 512-byte logical blocks: (4.03 GB/3.75 GiB)
[37847.268815] sd 3:0:0:0: [sdb] Write Protect is off
[37847.268820] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[37847.268974] sd 3:0:0:0: [sdb] No Caching mode page found
[37847.268986] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[37847.275906] sdb: sdb1 sdb2
sdb2: <bsd: sdb5 >
[37847.282734] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[37867.216638] sdc: sdc1 sdc2
[37867.230013] sdb: sdb1 sdb2
sdb2: <bsd: sdb5 >
[37867.440820] sdb: sdb1 sdb2
sdb2: <bsd: sdb5 >
[38463.236150] sdc: sdc1 sdc2
[38490.235943] sdc: sdc1 sdc2
[38622.935072] usb 1-4.1: USB disconnect, device number 66
[38648.250592] usb 1-4.1: new high-speed USB device number 68 using xhci_hcd
[38648.351764] usb 1-4.1: New USB device found, idVendor=0781, idProduct=5530, bcdDevice= 1.00
[38648.351778] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[38648.351786] usb 1-4.1: Product: Cruzer
[38648.351793] usb 1-4.1: Manufacturer: SanDisk
[38648.351800] usb 1-4.1: SerialNumber: 200515362207D0A3935C
[38648.353869] usb-storage 1-4.1:1.0: USB Mass Storage device detected
[38648.361734] scsi host5: usb-storage 1-4.1:1.0
[38649.387463] scsi 5:0:0:0: Direct-Access SanDisk Cruzer 1.00 PQ: 0 ANSI: 2
[38649.388588] sd 5:0:0:0: Attached scsi generic sg2 type 0
[38649.388872] sd 5:0:0:0: [sdd] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB)
[38649.389977] sd 5:0:0:0: [sdd] Write Protect is off
[38649.389983] sd 5:0:0:0: [sdd] Mode Sense: 03 00 00 00
[38649.390217] sd 5:0:0:0: [sdd] No Caching mode page found
[38649.390228] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[38649.397269] sdd: sdd1 sdd2
[38649.400787] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[38666.058225] INFO: task systemd-udevd:11752 blocked for more than 120 seconds.
[38666.058242] Tainted: G OE 4.19.0-6-amd64 #1 Debian 4.19.67-2+deb10u1
[38666.058247] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[38666.058255] systemd-udevd D 0 11752 1 0x00000320
[38666.058266] Call Trace:
[38666.058288] ? __schedule+0x2a2/0x870
[38666.058298] schedule+0x28/0x80
[38666.058307] schedule_preempt_disabled+0xa/0x10
[38666.058316] __mutex_lock.isra.8+0x2b5/0x4a0
[38666.058330] __blkdev_get+0x78/0x550
[38666.058341] ? bd_acquire+0xd0/0xd0
[38666.058350] blkdev_get+0x107/0x310
[38666.058361] ? bd_acquire+0xd0/0xd0
[38666.058370] do_dentry_open+0x13d/0x370
[38666.058380] path_openat+0x2c6/0x1480
[38666.058388] ? terminate_walk+0xe6/0x100
[38666.058399] ? seccomp_run_filters+0x5c/0xb0
[38666.058408] do_filp_open+0x93/0x100
[38666.058419] ? _cond_resched+0x15/0x30
[38666.058428] ? __check_object_size+0x15d/0x189
[38666.058435] ? __check_object_size+0x15d/0x189
[38666.058447] do_sys_open+0x186/0x210
[38666.058459] do_syscall_64+0x53/0x110
[38666.058470] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[38666.058479] RIP: 0033:0x7fb258f041ae
[38666.058493] Code: Bad RIP value.
[38666.058498] RSP: 002b:00007ffeac913300 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[38666.058507] RAX: ffffffffffffffda RBX: 00007ffeac914440 RCX: 00007fb258f041ae
[38666.058511] RDX: 00000000000a0800 RSI: 00005608236622a0 RDI: 00000000ffffff9c
[38666.058515] RBP: 0000000000000000 R08: 0000560822032140 R09: 0000560823672e70
[38666.058519] R10: 0000000000000000 R11: 0000000000000246 R12: 0000560823662150
[38666.058523] R13: 0000000000000000 R14: 00007ffeac914408 R15: 0000560822039ac0
[38786.886586] INFO: task systemd-udevd:11752 blocked for more than 120 seconds.
[38786.886599] Tainted: G OE 4.19.0-6-amd64 #1 Debian 4.19.67-2+deb10u1
[38786.886604] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[38786.886610] systemd-udevd D 0 11752 1 0x00000324
[38786.886618] Call Trace:
[38786.886636] ? __schedule+0x2a2/0x870
[38786.886644] schedule+0x28/0x80
[38786.886651] schedule_preempt_disabled+0xa/0x10
[38786.886658] __mutex_lock.isra.8+0x2b5/0x4a0
[38786.886670] __blkdev_get+0x78/0x550
[38786.886680] ? bd_acquire+0xd0/0xd0
[38786.886688] blkdev_get+0x107/0x310
[38786.886698] ? bd_acquire+0xd0/0xd0
[38786.886705] do_dentry_open+0x13d/0x370
[38786.886714] path_openat+0x2c6/0x1480
[38786.886721] ? terminate_walk+0xe6/0x100
[38786.886729] ? seccomp_run_filters+0x5c/0xb0
[38786.886737] do_filp_open+0x93/0x100
[38786.886764] ? _cond_resched+0x15/0x30
[38786.886772] ? __check_object_size+0x15d/0x189
[38786.886779] ? __check_object_size+0x15d/0x189
[38786.886790] do_sys_open+0x186/0x210
[38786.886802] do_syscall_64+0x53/0x110
[38786.886814] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[38786.886821] RIP: 0033:0x7fb258f041ae
[38786.886836] Code: Bad RIP value.
[38786.886840] RSP: 002b:00007ffeac913300 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[38786.886847] RAX: ffffffffffffffda RBX: 00007ffeac914440 RCX: 00007fb258f041ae
[38786.886851] RDX: 00000000000a0800 RSI: 00005608236622a0 RDI: 00000000ffffff9c
[38786.886855] RBP: 0000000000000000 R08: 0000560822032140 R09: 0000560823672e70
[38786.886859] R10: 0000000000000000 R11: 0000000000000246 R12: 0000560823662150
[38786.886863] R13: 0000000000000000 R14: 00007ffeac914408 R15: 0000560822039ac0
[38786.886898] INFO: task blkid:14792 blocked for more than 120 seconds.
[38786.886907] Tainted: G OE 4.19.0-6-amd64 #1 Debian 4.19.67-2+deb10u1
[38786.886911] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[38786.886917] blkid D 0 14792 14790 0x00000000
[38786.886925] Call Trace:
[38786.886936] ? __schedule+0x2a2/0x870
[38786.886945] schedule+0x28/0x80
[38786.886953] schedule_preempt_disabled+0xa/0x10
[38786.886962] __mutex_lock.isra.8+0x2b5/0x4a0
[38786.886970] ? _cond_resched+0x15/0x30
[38786.886979] __blkdev_get+0x78/0x550
[38786.886989] ? bd_acquire+0xd0/0xd0
[38786.886997] blkdev_get+0x107/0x310
[38786.887008] ? bd_acquire+0xd0/0xd0
[38786.887017] do_dentry_open+0x13d/0x370
[38786.887026] path_openat+0x2c6/0x1480
[38786.887036] ? __check_object_size+0x15d/0x189
[38786.887045] do_filp_open+0x93/0x100
[38786.887055] ? __check_object_size+0x15d/0x189
[38786.887066] do_sys_open+0x186/0x210
[38786.887077] do_syscall_64+0x53/0x110
[38786.887087] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[38786.887093] RIP: 0033:0x7f264e2fa1ae
[38786.887102] Code: Bad RIP value.
[38786.887106] RSP: 002b:00007fffc71f52d0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[38786.887113] RAX: ffffffffffffffda RBX: 0000555deacba590 RCX: 00007f264e2fa1ae
[38786.887117] RDX: 0000000000080000 RSI: 0000555deacb9570 RDI: 00000000ffffff9c
[38786.887121] RBP: 0000555deacb72b0 R08: 000000000000102f R09: 0000555deacba490
[38786.887124] R10: 0000000000000000 R11: 0000000000000246 R12: 000000005dc48e02
[38786.887128] R13: 00007f264e4253c4 R14: 00000000ddc48e02 R15: 00007f264e414425
[38821.916455] sdb: sdb1 sdb2
sdb2: <bsd: sdb5 >
[39215.305220] usb 1-2: USB disconnect, device number 67
[39218.565588] usb 1-2: new high-speed USB device number 69 using xhci_hcd
[39218.714220] usb 1-2: New USB device found, idVendor=abcd, idProduct=1234, bcdDevice= 1.00
[39218.714228] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[39218.714232] usb 1-2: Product: UDisk
[39218.714236] usb 1-2: Manufacturer: General
[39218.714240] usb 1-2: SerialNumber: Љ
[39218.718793] usb-storage 1-2:1.0: USB Mass Storage device detected
[39218.719367] scsi host3: usb-storage 1-2:1.0
[39219.737992] scsi 3:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
[39219.739126] sd 3:0:0:0: Attached scsi generic sg1 type 0
[39219.741832] sd 3:0:0:0: [sdb] 7866368 512-byte logical blocks: (4.03 GB/3.75 GiB)
[39219.742070] sd 3:0:0:0: [sdb] Write Protect is off
[39219.742093] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[39219.742460] sd 3:0:0:0: [sdb] No Caching mode page found
[39219.742478] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[39219.753208] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[39226.990935] sdd: sdd1 sdd2
[39254.587467] sdd: sdd1 sdd2
[39254.738749] sdd: sdd1 sdd2
[39267.803587] sdd: sdd1 sdd2
[39344.929413] usb 1-2: USB disconnect, device number 69
[39345.289517] usb 1-2: new high-speed USB device number 70 using xhci_hcd
[39389.309506] sdd: sdd1 sdd2
[39655.343917] sdd: sdd1 sdd2
sdd2: <bsd: sdd5 >
[39655.353711] sdd: sdd1 sdd2
sdd2: <bsd: sdd5 >
[39667.312446] usb 1-4.1: USB disconnect, device number 68
[39813.639116] usb 1-2: new high-speed USB device number 71 using xhci_hcd
[39818.919051] usb 1-2: device descriptor read/64, error -110
[39834.534566] usb 1-2: device descriptor read/64, error -110
[39834.770534] usb 1-2: new high-speed USB device number 72 using xhci_hcd
[39839.914359] usb 1-2: device descriptor read/64, error -110
[39855.529969] usb 1-2: device descriptor read/64, error -110
[39855.641893] usb usb1-port2: attempt power cycle
[39856.293865] usb 1-2: new high-speed USB device number 73 using xhci_hcd
[39861.541768] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[39866.917620] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[39867.125570] usb 1-2: device not accepting address 73, error -62
[39867.253547] usb 1-2: new high-speed USB device number 74 using xhci_hcd
[39872.293495] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[39877.673263] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[39877.881185] usb 1-2: device not accepting address 74, error -62
[39877.881328] usb usb1-port2: unable to enumerate USB device
[39898.331904] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[39927.448987] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[39937.507034] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[39958.612902] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[39972.436572] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[39990.089090] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[40052.738246] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[40135.941268] usb 1-2: new high-speed USB device number 75 using xhci_hcd
[40141.213102] usb 1-2: device descriptor read/64, error -110
[40156.828711] usb 1-2: device descriptor read/64, error -110
[40157.064584] usb 1-2: new high-speed USB device number 76 using xhci_hcd
[40162.208505] usb 1-2: device descriptor read/64, error -110
[40177.820072] usb 1-2: device descriptor read/64, error -110
[40177.928054] usb usb1-port2: attempt power cycle
[40178.579948] usb 1-2: new high-speed USB device number 77 using xhci_hcd
[40183.835819] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[40189.211691] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[40189.419630] usb 1-2: device not accepting address 77, error -62
[40189.547628] usb 1-2: new high-speed USB device number 78 using xhci_hcd
[40194.587451] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[40199.963350] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[40200.171285] usb 1-2: device not accepting address 78, error -62
[40200.171470] usb usb1-port2: unable to enumerate USB device
[40261.286260] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[40423.689986] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[40440.247072] usb 1-4.1: new high-speed USB device number 79 using xhci_hcd
[40445.538848] usb 1-4.1: device descriptor read/64, error -110
[40461.154313] usb 1-4.1: device descriptor read/64, error -110
[40461.342304] usb 1-4.1: new high-speed USB device number 80 using xhci_hcd
[40466.530201] usb 1-4.1: device descriptor read/64, error -110
[40482.145682] usb 1-4.1: device descriptor read/64, error -110
[40482.253824] usb 1-4-port1: attempt power cycle
[40482.865599] usb 1-4.1: new high-speed USB device number 81 using xhci_hcd
[40487.957491] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[40493.330396] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[40493.545241] usb 1-4.1: device not accepting address 81, error -62
[40493.629194] usb 1-4.1: new high-speed USB device number 82 using xhci_hcd
[40498.705144] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[40504.080977] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[40504.288942] usb 1-4.1: device not accepting address 82, error -62
[40504.289093] usb 1-4-port1: unable to enumerate USB device
[41030.292716] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[41210.382949] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[41287.175132] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[41332.434574] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[41346.550030] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0
[41376.968439] usb 1-2: new high-speed USB device number 83 using xhci_hcd
[41382.260189] usb 1-2: device descriptor read/64, error -110
[41397.876845] usb 1-2: device descriptor read/64, error -110
[41398.111647] usb 1-2: new high-speed USB device number 84 using xhci_hcd
[41403.251606] usb 1-2: device descriptor read/64, error -110
[41418.867074] usb 1-2: device descriptor read/64, error -110
[41418.975203] usb usb1-port2: attempt power cycle
[41419.638968] usb 1-2: new high-speed USB device number 85 using xhci_hcd
[41424.887071] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[41430.258724] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[41430.466677] usb 1-2: device not accepting address 85, error -62
[41430.594622] usb 1-2: new high-speed USB device number 86 using xhci_hcd
[41435.634617] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[41441.014871] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[41441.222288] usb 1-2: device not accepting address 86, error -62
[41441.222397] usb usb1-port2: unable to enumerate USB device
[41528.596990] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0