Code: Select all
[ 0.000000] microcode: microcode updated early to revision 0x2d, date = 2018-02-07
[ 0.000000] Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=ac2b1f54-c797-4f5e-9656-834ae2d6ccbb ro quiet
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bac8efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bac8f000-0x00000000bade1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bade2000-0x00000000bade9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000badea000-0x00000000baf1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baf1f000-0x00000000baf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001be9fefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001be9ff000-0x00000001bfdfffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. Dell System XPS L702X/0K4H3G, BIOS A14 11/11/2011
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2194.839 MHz processor
[ 0.006759] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.006766] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.006789] last_pfn = 0x1be9ff max_arch_pfn = 0x400000000
[ 0.006800] MTRR default type: uncachable
[ 0.006802] MTRR fixed ranges enabled:
[ 0.006806] 00000-9FFFF write-back
[ 0.006808] A0000-BFFFF uncachable
[ 0.006811] C0000-FFFFF write-protect
[ 0.006813] MTRR variable ranges enabled:
[ 0.006817] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.006820] 1 base 000000000 mask F80000000 write-back
[ 0.006823] 2 base 080000000 mask FC0000000 write-back
[ 0.006825] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.006828] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.006830] 5 base 100000000 mask F80000000 write-back
[ 0.006833] 6 base 180000000 mask FC0000000 write-back
[ 0.006835] 7 base 1BFE00000 mask FFFE00000 uncachable
[ 0.006837] 8 disabled
[ 0.006838] 9 disabled
[ 0.009019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.009270] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.043414] reserving inaccessible SNB gfx pages
[ 0.043428] BRK [0xb5001000, 0xb5001fff] PGTABLE
[ 0.043434] BRK [0xb5002000, 0xb5002fff] PGTABLE
[ 0.043437] BRK [0xb5003000, 0xb5003fff] PGTABLE
[ 0.043600] BRK [0xb5004000, 0xb5004fff] PGTABLE
[ 0.043606] BRK [0xb5005000, 0xb5005fff] PGTABLE
[ 0.044594] BRK [0xb5006000, 0xb5006fff] PGTABLE
[ 0.044718] BRK [0xb5007000, 0xb5007fff] PGTABLE
[ 0.044755] BRK [0xb5008000, 0xb5008fff] PGTABLE
[ 0.044904] BRK [0xb5009000, 0xb5009fff] PGTABLE
[ 0.045041] RAMDISK: [mem 0x32c83000-0x35638fff]
[ 0.045058] ACPI: Early table checksum verification disabled
[ 0.045218] ACPI: RSDP 0x00000000000F00E0 000024 (v02 DELL )
[ 0.045228] ACPI: XSDT 0x00000000BAFFE120 00008C (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.045244] ACPI: FACP 0x00000000BAFEF000 0000F4 (v03 DELL QA09 00000002 PTL 00000002)
[ 0.045259] ACPI: DSDT 0x00000000BAFF2000 009178 (v02 DELL SNB-CPT 00000000 INTL 20061109)
[ 0.045269] ACPI: FACS 0x00000000BAF40000 000040
[ 0.045276] ACPI: FACS 0x00000000BAF40000 000040
[ 0.045284] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 DELL QA09 00000002 LOHR 00000001)
[ 0.045294] ACPI: SSDT 0x00000000BAFFC000 000166 (v01 DELL PtidDevc 00001000 INTL 20061109)
[ 0.045303] ACPI: ASF! 0x00000000BAFF1000 0000A5 (v32 DELL QA09 00000002 PTL 00000002)
[ 0.045313] ACPI: HPET 0x00000000BAFEE000 000038 (v01 DELL QA09 00000002 PTL 00000002)
[ 0.045321] ACPI: APIC 0x00000000BAFED000 000098 (v01 DELL QA09 00000002 PTL 00000002)
[ 0.045330] ACPI: MCFG 0x00000000BAFEC000 00003C (v01 DELL QA09 00000002 PTL 00000002)
[ 0.045339] ACPI: SSDT 0x00000000BAFEA000 0012AD (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[ 0.045348] ACPI: SSDT 0x00000000BAFE9000 00094E (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.045358] ACPI: SSDT 0x00000000BAFE8000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.045367] ACPI: UEFI 0x00000000BAFE7000 00003E (v01 DELL QA09 00000002 PTL 00000002)
[ 0.045376] ACPI: UEFI 0x00000000BAFE6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.045385] ACPI: UEFI 0x00000000BAFE5000 00026A (v01 DELL QA09 00000002 PTL 00000002)
[ 0.045412] ACPI: Local APIC address 0xfee00000
[ 0.045638] No NUMA configuration found
[ 0.045641] Faking a node at [mem 0x0000000000000000-0x00000001be9fefff]
[ 0.045651] NODE_DATA(0) allocated [mem 0x1be9fa000-0x1be9fefff]
[ 0.045781] Zone ranges:
[ 0.045784] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.045788] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.045791] Normal [mem 0x0000000100000000-0x00000001be9fefff]
[ 0.045794] Device empty
[ 0.045797] Movable zone start for each node
[ 0.045799] Early memory node ranges
[ 0.045802] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.045804] node 0: [mem 0x0000000000100000-0x00000000bac8efff]
[ 0.045806] node 0: [mem 0x00000000bafff000-0x00000000baffffff]
[ 0.045808] node 0: [mem 0x0000000100000000-0x00000001be9fefff]
[ 0.045818] Reserved but unavailable: 100 pages
[ 0.045822] Initmem setup node 0 [mem 0x0000000000001000-0x00000001be9fefff]
[ 0.045826] On node 0 totalpages: 1545771
[ 0.045829] DMA zone: 64 pages used for memmap
[ 0.045830] DMA zone: 156 pages reserved
[ 0.045833] DMA zone: 3996 pages, LIFO batch:0
[ 0.046170] DMA32 zone: 11891 pages used for memmap
[ 0.046172] DMA32 zone: 760976 pages, LIFO batch:63
[ 0.114211] Normal zone: 12200 pages used for memmap
[ 0.114215] Normal zone: 780799 pages, LIFO batch:63
[ 0.178044] Reserving Intel graphics memory at [mem 0xbba00000-0xbf9fffff]
[ 0.178405] ACPI: PM-Timer IO Port: 0x408
[ 0.178410] ACPI: Local APIC address 0xfee00000
[ 0.178430] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.178432] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.178450] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.178455] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.178459] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.178463] ACPI: IRQ0 used by override.
[ 0.178466] ACPI: IRQ9 used by override.
[ 0.178472] Using ACPI (MADT) for SMP configuration information
[ 0.178476] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.178487] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.178546] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.178551] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.178553] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.178555] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.178556] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.178561] PM: Registered nosave memory: [mem 0xbac8f000-0xbade1fff]
[ 0.178563] PM: Registered nosave memory: [mem 0xbade2000-0xbade9fff]
[ 0.178564] PM: Registered nosave memory: [mem 0xbadea000-0xbaf1efff]
[ 0.178566] PM: Registered nosave memory: [mem 0xbaf1f000-0xbaf9efff]
[ 0.178568] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[ 0.178572] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[ 0.178574] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[ 0.178575] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.178577] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.178578] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.178580] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.178582] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.178584] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.178585] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.178587] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.178589] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.178590] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.178592] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.178594] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[ 0.178595] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.178600] [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[ 0.178603] Booting paravirtualized kernel on bare hardware
[ 0.178609] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.527740] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[ 0.527760] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.532562] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144
[ 0.532584] pcpu-alloc: s144408 r8192 d31720 u262144 alloc=1*2097152
[ 0.532587] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.532657] Built 1 zonelists, mobility grouping on. Total pages: 1521460
[ 0.532659] Policy zone: Normal
[ 0.532663] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=ac2b1f54-c797-4f5e-9656-834ae2d6ccbb ro quiet
[ 0.628416] Calgary: detecting Calgary via BIOS EBDA area
[ 0.628420] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.671054] Memory: 5949292K/6183084K available (10252K kernel code, 1243K rwdata, 3324K rodata, 1584K init, 2280K bss, 233792K reserved, 0K cma-reserved)
[ 0.671332] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.671347] Kernel/User page tables isolation: enabled
[ 0.671469] ftrace: allocating 31872 entries in 125 pages
[ 0.710881] rcu: Hierarchical RCU implementation.
[ 0.710885] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.710888] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.721157] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[ 0.723918] Console: colour VGA+ 80x25
[ 0.723929] console [tty0] enabled
[ 0.723977] ACPI: Core revision 20180810
[ 0.724387] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.724405] hpet clockevent registered
[ 0.724416] APIC: Switch to symmetric I/O mode setup
[ 0.724497] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.725188] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.744417] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa32779500, max_idle_ns: 440795235982 ns
[ 0.744454] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.67 BogoMIPS (lpj=8779356)
[ 0.744461] pid_max: default: 32768 minimum: 301
[ 0.744550] Security Framework initialized
[ 0.744553] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.744597] AppArmor: AppArmor initialized
[ 0.747367] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.748781] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.748849] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.748898] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.749454] Disabled fast string operations
[ 0.749477] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.749479] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.749534] process: using mwait in idle threads
[ 0.749541] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.749544] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.749547] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.749551] Spectre V2 : Mitigation: Full generic retpoline
[ 0.749553] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.749554] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.749575] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.749577] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.749578] Speculative Store Bypass: Vulnerable
[ 0.749663] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.750083] Freeing SMP alternatives memory: 24K
[ 0.756593] TSC deadline timer enabled
[ 0.756600] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.756885] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.756948] ... version: 3
[ 0.756950] ... bit width: 48
[ 0.756951] ... generic registers: 4
[ 0.756953] ... value mask: 0000ffffffffffff
[ 0.756954] ... max period: 00007fffffffffff
[ 0.756956] ... fixed-purpose events: 3
[ 0.756957] ... event mask: 000000070000000f
[ 0.757100] rcu: Hierarchical SRCU implementation.
[ 0.759362] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.759573] smp: Bringing up secondary CPUs ...
[ 0.759800] x86: Booting SMP configuration:
[ 0.759803] .... node #0, CPUs: #1
[ 0.006813] Disabled fast string operations
[ 0.762532] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.762532] #2
[ 0.006813] Disabled fast string operations
[ 0.766645] #3
[ 0.006813] Disabled fast string operations
[ 0.768673] #4
[ 0.006813] Disabled fast string operations
[ 0.772658] #5
[ 0.006813] Disabled fast string operations
[ 0.775540] #6
[ 0.006813] Disabled fast string operations
[ 0.779199] #7
[ 0.006813] Disabled fast string operations
[ 0.780480] smp: Brought up 1 node, 8 CPUs
[ 0.780480] smpboot: Max logical packages: 1
[ 0.780480] smpboot: Total of 8 processors activated (35117.42 BogoMIPS)
[ 0.785097] devtmpfs: initialized
[ 0.785097] x86/mm: Memory block size: 128MB
[ 0.785991] PM: Registering ACPI NVS region [mem 0xbade2000-0xbade9fff] (32768 bytes)
[ 0.785991] PM: Registering ACPI NVS region [mem 0xbaf1f000-0xbaf9efff] (524288 bytes)
[ 0.785991] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.785991] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.785991] pinctrl core: initialized pinctrl subsystem
[ 0.785991] NET: Registered protocol family 16
[ 0.785991] audit: initializing netlink subsys (disabled)
[ 0.785991] audit: type=2000 audit(1592236914.060:1): state=initialized audit_enabled=0 res=1
[ 0.785991] cpuidle: using governor ladder
[ 0.785991] cpuidle: using governor menu
[ 0.785991] ACPI: bus type PCI registered
[ 0.785991] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.788554] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.788587] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.788609] PCI: Using configuration type 1 for base access
[ 0.788702] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.789140] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.789142] mtrr: probably your BIOS does not setup all CPUs.
[ 0.789143] mtrr: corrected configuration.
[ 0.790901] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.790901] ACPI: Added _OSI(Module Device)
[ 0.790901] ACPI: Added _OSI(Processor Device)
[ 0.790901] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.790901] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.790901] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.790901] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.809054] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.815311] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.816490] ACPI: Dynamic OEM Table Load:
[ 0.816511] ACPI: SSDT 0xFFFF9884B6BD6000 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.817580] ACPI: Dynamic OEM Table Load:
[ 0.817595] ACPI: SSDT 0xFFFF9884B6BDF000 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.818275] ACPI: Dynamic OEM Table Load:
[ 0.818287] ACPI: SSDT 0xFFFF9884B6BE1400 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.821782] ACPI: EC: EC started
[ 0.821784] ACPI: EC: interrupt blocked
[ 0.824067] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.824073] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.824076] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.824078] ACPI: Interpreter enabled
[ 0.824134] ACPI: (supports S0 S3 S4 S5)
[ 0.824136] ACPI: Using IOAPIC for interrupt routing
[ 0.824201] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.824769] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.826725] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.826729] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.826764] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.827159] PCI host bridge to bus 0000:00
[ 0.827162] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.827163] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.827165] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.827166] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
[ 0.827167] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.827168] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.827177] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.827264] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.827303] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.827378] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.827389] pci 0000:00:02.0: reg 0x10: [mem 0xf2400000-0xf27fffff 64bit]
[ 0.827394] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.827398] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.827573] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.827600] pci 0000:00:16.0: reg 0x10: [mem 0xf3c05000-0xf3c0500f 64bit]
[ 0.827678] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.827756] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.827779] pci 0000:00:1a.0: reg 0x10: [mem 0xf3c0a000-0xf3c0a3ff]
[ 0.827866] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.827942] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.827965] pci 0000:00:1b.0: reg 0x10: [mem 0xf3c00000-0xf3c03fff 64bit]
[ 0.828042] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.828113] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.828198] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.828278] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.828368] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.828453] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.828544] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.828624] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.828714] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.828793] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.828883] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.828964] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.828987] pci 0000:00:1d.0: reg 0x10: [mem 0xf3c09000-0xf3c093ff]
[ 0.829074] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.829148] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[ 0.829321] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.829341] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
[ 0.829349] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
[ 0.829356] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
[ 0.829364] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
[ 0.829372] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.829380] pci 0000:00:1f.2: reg 0x24: [mem 0xf3c08000-0xf3c087ff]
[ 0.829423] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.829491] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.829511] pci 0000:00:1f.3: reg 0x10: [mem 0xf3c04000-0xf3c040ff 64bit]
[ 0.829532] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.829651] pci 0000:01:00.0: [10de:1246] type 00 class 0x030000
[ 0.829665] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf1ffffff]
[ 0.829673] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.829681] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.829687] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
[ 0.829693] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.829698] pci 0000:01:00.0: enabling Extended Tags
[ 0.844456] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.844462] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.844467] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
[ 0.844474] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd3ffffff 64bit pref]
[ 0.844546] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.844755] pci 0000:03:00.0: [8086:008a] type 00 class 0x028000
[ 0.844973] pci 0000:03:00.0: reg 0x10: [mem 0xf3b00000-0xf3b01fff 64bit]
[ 0.845724] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.846162] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.846168] pci 0000:00:1c.1: bridge window [mem 0xf3b00000-0xf3bfffff]
[ 0.846245] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.846287] pci 0000:04:00.0: reg 0x10: [mem 0xf3a00000-0xf3a01fff 64bit]
[ 0.846444] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.846571] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.846577] pci 0000:00:1c.3: bridge window [mem 0xf3a00000-0xf3afffff]
[ 0.846660] pci 0000:00:1c.4: PCI bridge to [bus 05-09]
[ 0.846664] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.846668] pci 0000:00:1c.4: bridge window [mem 0xf3100000-0xf39fffff]
[ 0.846674] pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf2ffffff 64bit pref]
[ 0.846745] pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000
[ 0.846781] pci 0000:0a:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.846815] pci 0000:0a:00.0: reg 0x18: [mem 0xf3004000-0xf3004fff 64bit pref]
[ 0.846837] pci 0000:0a:00.0: reg 0x20: [mem 0xf3000000-0xf3003fff 64bit pref]
[ 0.846956] pci 0000:0a:00.0: supports D1 D2
[ 0.846957] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.847094] pci 0000:00:1c.5: PCI bridge to [bus 0a]
[ 0.847098] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.847106] pci 0000:00:1c.5: bridge window [mem 0xf3000000-0xf30fffff 64bit pref]
[ 0.847569] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.847625] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 *6 10 11 12 14 15)
[ 0.847677] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.847728] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.847779] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.847831] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.847883] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.847934] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 0.848424] ACPI: EC: interrupt unblocked
[ 0.848424] ACPI: EC: event unblocked
[ 0.848424] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.848424] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.848432] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.848432] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.848436] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.848437] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.848438] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.848439] vgaarb: loaded
[ 0.848498] pps_core: LinuxPPS API ver. 1 registered
[ 0.848499] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.848501] PTP clock support registered
[ 0.848508] EDAC MC: Ver: 3.0.0
[ 0.852515] PCI: Using ACPI for IRQ routing
[ 0.853981] PCI: pci_cache_line_size set to 64 bytes
[ 0.854084] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.854085] e820: reserve RAM buffer [mem 0xbac8f000-0xbbffffff]
[ 0.854086] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.854087] e820: reserve RAM buffer [mem 0x1be9ff000-0x1bfffffff]
[ 0.854204] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.854204] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.856445] clocksource: Switched to clocksource tsc-early
[ 0.866963] VFS: Disk quotas dquot_6.6.0
[ 0.866982] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.867093] AppArmor: AppArmor Filesystem Enabled
[ 0.867112] pnp: PnP ACPI init
[ 0.867279] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.867281] system 00:00: [io 0x1000-0x1003] has been reserved
[ 0.867282] system 00:00: [io 0x1004-0x1013] has been reserved
[ 0.867283] system 00:00: [io 0xffff] has been reserved
[ 0.867284] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.867286] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.867287] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.867288] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.867294] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.867320] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.867377] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.867380] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.867435] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.867475] pnp 00:04: Plug and Play ACPI device, IDs DLL0571 PNP0f13 (active)
[ 0.867576] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[ 0.867601] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.867602] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.867604] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.867605] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.867606] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.867609] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.867610] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.867612] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.867613] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.867614] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.867618] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.867830] pnp: PnP ACPI: found 6 devices
[ 0.873684] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.873689] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.873739] pci 0000:01:00.0: BAR 6: assigned [mem 0xf2000000-0xf207ffff pref]
[ 0.873742] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.873744] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.873746] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
[ 0.873749] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd3ffffff 64bit pref]
[ 0.873752] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.873763] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.873768] pci 0000:00:1c.1: bridge window [mem 0xf3b00000-0xf3bfffff]
[ 0.873776] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.873781] pci 0000:00:1c.3: bridge window [mem 0xf3a00000-0xf3afffff]
[ 0.873789] pci 0000:00:1c.4: PCI bridge to [bus 05-09]
[ 0.873792] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.873797] pci 0000:00:1c.4: bridge window [mem 0xf3100000-0xf39fffff]
[ 0.873800] pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf2ffffff 64bit pref]
[ 0.873806] pci 0000:00:1c.5: PCI bridge to [bus 0a]
[ 0.873809] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.873816] pci 0000:00:1c.5: bridge window [mem 0xf3000000-0xf30fffff 64bit pref]
[ 0.873823] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.873824] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.873825] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.873826] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]
[ 0.873827] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.873829] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.873830] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf20fffff]
[ 0.873831] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd3ffffff 64bit pref]
[ 0.873832] pci_bus 0000:03: resource 1 [mem 0xf3b00000-0xf3bfffff]
[ 0.873833] pci_bus 0000:04: resource 1 [mem 0xf3a00000-0xf3afffff]
[ 0.873835] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.873836] pci_bus 0000:05: resource 1 [mem 0xf3100000-0xf39fffff]
[ 0.873837] pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf2ffffff 64bit pref]
[ 0.873838] pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
[ 0.873839] pci_bus 0000:0a: resource 2 [mem 0xf3000000-0xf30fffff 64bit pref]
[ 0.873922] NET: Registered protocol family 2
[ 0.874095] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.874129] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.874269] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.874405] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.874445] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.874473] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.874537] NET: Registered protocol family 1
[ 0.874542] NET: Registered protocol family 44
[ 0.874552] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.875040] PCI: CLS 64 bytes, default 64
[ 0.875082] Unpacking initramfs...
[ 1.669975] Freeing initrd memory: 42712K
[ 1.670002] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.670004] software IO TLB: mapped [mem 0xb6c8f000-0xbac8f000] (64MB)
[ 1.670692] Initialise system trusted keyrings
[ 1.670703] Key type blacklist registered
[ 1.670759] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.672016] zbud: loaded
[ 1.890726] Key type asymmetric registered
[ 1.890727] Asymmetric key parser 'x509' registered
[ 1.890737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.890777] io scheduler noop registered
[ 1.890778] io scheduler deadline registered
[ 1.890807] io scheduler cfq registered (default)
[ 1.890808] io scheduler mq-deadline registered
[ 1.891511] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.891524] intel_idle: MWAIT substates: 0x21120
[ 1.891525] intel_idle: v0.4.1 model 0x2A
[ 1.891949] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.892377] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.892816] Linux agpgart interface v0.103
[ 1.892872] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.892872] AMD IOMMUv2 functionality not available on this system
[ 1.893410] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.898181] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.898186] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.898318] mousedev: PS/2 mouse device common for all mice
[ 1.898408] rtc_cmos 00:01: RTC can wake from S4
[ 1.898586] rtc_cmos 00:01: registered as rtc0
[ 1.898601] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.898611] intel_pstate: Intel P-state driver initializing
[ 1.899180] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.900349] NET: Registered protocol family 10
[ 1.905278] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.920638] Segment Routing with IPv6
[ 1.920693] mip6: Mobile IPv6
[ 1.920699] NET: Registered protocol family 17
[ 1.920949] mpls_gso: MPLS GSO support
[ 1.922329] mce: Using 9 MCE banks
[ 1.922452] microcode: sig=0x206a7, pf=0x10, revision=0x2d
[ 1.922845] microcode: Microcode Update Driver: v2.2.
[ 1.922879] sched_clock: Marking stable (1920002858, 2813428)->(1993410976, -70594690)
[ 1.923365] registered taskstats version 1
[ 1.923366] Loading compiled-in X.509 certificates
[ 1.968085] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.968100] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.968121] zswap: loaded using pool lzo/zbud
[ 1.968221] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.968652] rtc_cmos 00:01: setting system clock to 2020-06-15 16:01:56 UTC (1592236916)
[ 1.970494] Freeing unused kernel image memory: 1584K
[ 2.032555] Write protecting the kernel read-only data: 16384k
[ 2.034099] Freeing unused kernel image memory: 2028K
[ 2.034646] Freeing unused kernel image memory: 772K
[ 2.051403] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.051404] x86/mm: Checking user space page tables
[ 2.057879] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.057881] Run /init as init process
[ 2.189240] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.189253] ACPI: Power Button [PWRB]
[ 2.189320] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 2.189329] ACPI: Sleep Button [SLPB]
[ 2.189387] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 2.189401] ACPI: Lid Switch [LID0]
[ 2.189455] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 2.189466] ACPI: Power Button [PWRF]
[ 2.193657] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.193661] ACPI: Thermal Zone [TZ00] (45 C)
[ 2.194082] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.194084] ACPI: Thermal Zone [TZ01] (45 C)
[ 2.194099] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 2.197698] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180810/utaddress-213)
[ 2.197705] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.197709] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180810/utaddress-213)
[ 2.197713] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\GPIN) (20180810/utaddress-213)
[ 2.197717] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[ 2.197720] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.197721] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180810/utaddress-213)
[ 2.197725] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\GPIN) (20180810/utaddress-213)
[ 2.197728] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[ 2.197732] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.197733] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180810/utaddress-213)
[ 2.197736] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\GPIN) (20180810/utaddress-213)
[ 2.197740] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[ 2.197743] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.197744] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.204322] cryptd: max_cpu_qlen set to 1000
[ 2.212507] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.215726] ACPI: bus type USB registered
[ 2.215751] usbcore: registered new interface driver usbfs
[ 2.215761] usbcore: registered new interface driver hub
[ 2.215797] usbcore: registered new device driver usb
[ 2.217825] SCSI subsystem initialized
[ 2.221405] AVX version of gcm_enc/dec engaged.
[ 2.221407] AES CTR mode by8 optimization enabled
[ 2.227809] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.228786] ehci-pci: EHCI PCI platform driver
[ 2.228940] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.228948] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.228962] ehci-pci 0000:00:1a.0: debug port 2
[ 2.232878] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.232896] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3c0a000
[ 2.238301] libata version 3.00 loaded.
[ 2.245611] ahci 0000:00:1f.2: version 3.0
[ 2.245801] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.248441] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.248505] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 2.248507] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.248509] usb usb1: Product: EHCI Host Controller
[ 2.248510] usb usb1: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd
[ 2.248511] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.248654] hub 1-0:1.0: USB hub found
[ 2.248662] hub 1-0:1.0: 2 ports detected
[ 2.248760] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 2.248770] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 2.248906] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[ 2.249232] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 2.249233] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.249234] usb usb2: Product: xHCI Host Controller
[ 2.249235] usb usb2: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd
[ 2.249236] usb usb2: SerialNumber: 0000:04:00.0
[ 2.249346] hub 2-0:1.0: USB hub found
[ 2.249361] hub 2-0:1.0: 2 ports detected
[ 2.249473] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.249479] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 2.249480] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 2.249483] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[ 2.249485] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[ 2.249502] ehci-pci 0000:00:1d.0: debug port 2
[ 2.252365] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.252410] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 2.252411] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.252412] usb usb4: Product: xHCI Host Controller
[ 2.252413] usb usb4: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd
[ 2.252414] usb usb4: SerialNumber: 0000:04:00.0
[ 2.252538] hub 4-0:1.0: USB hub found
[ 2.252552] hub 4-0:1.0: 2 ports detected
[ 2.253415] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.253433] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3c09000
[ 2.255897] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x33 impl SATA mode
[ 2.255900] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 2.268435] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.268492] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 2.268494] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.268495] usb usb3: Product: EHCI Host Controller
[ 2.268495] usb usb3: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd
[ 2.268496] usb usb3: SerialNumber: 0000:00:1d.0
[ 2.268628] hub 3-0:1.0: USB hub found
[ 2.268634] hub 3-0:1.0: 2 ports detected
[ 2.293022] scsi host0: ahci
[ 2.293228] scsi host1: ahci
[ 2.293459] scsi host2: ahci
[ 2.293655] scsi host3: ahci
[ 2.293800] scsi host4: ahci
[ 2.293926] scsi host5: ahci
[ 2.293985] ata1: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08100 irq 24
[ 2.293987] ata2: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08180 irq 24
[ 2.293987] ata3: DUMMY
[ 2.293988] ata4: DUMMY
[ 2.293989] ata5: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08300 irq 24
[ 2.293991] ata6: SATA max UDMA/133 abar m2048@0xf3c08000 port 0xf3c08380 irq 24
[ 2.336572] [drm] Replacing VGA console driver
[ 2.336971] Console: switching to colour dummy device 80x25
[ 2.337853] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.337855] [drm] Driver supports precise vblank timestamp query.
[ 2.338768] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.439447] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 2.439558] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 2.439592] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 2.439699] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input7
[ 2.440112] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.440181] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 2.567857] fbcon: inteldrmfb (fb0) is primary device
[ 2.584521] usb 2-1: new low-speed USB device number 2 using xhci_hcd
[ 2.592522] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.607362] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.608503] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.630352] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.640086] ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133
[ 2.640090] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 2.676518] tsc: Refined TSC clocksource calibration: 2195.012 MHz
[ 2.676540] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cab9042, max_idle_ns: 440795210298 ns
[ 2.676723] clocksource: Switched to clocksource tsc
[ 2.678832] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.679095] ata1.00: configured for UDMA/133
[ 2.679674] scsi 0:0:0:0: Direct-Access ATA ST9500423AS DEM1 PQ: 0 ANSI: 5
[ 2.753244] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.753249] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.753967] hub 1-1:1.0: USB hub found
[ 2.754214] hub 1-1:1.0: 6 ports detected
[ 2.763222] random: fast init done
[ 2.765239] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.765244] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.765913] hub 3-1:1.0: USB hub found
[ 2.766003] hub 3-1:1.0: 8 ports detected
[ 2.768018] usb 2-1: New USB device found, idVendor=03f0, idProduct=094a, bcdDevice= 1.00
[ 2.768021] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.768024] usb 2-1: Product: HP USB Optical Mouse
[ 2.768026] usb 2-1: Manufacturer: PixArt
[ 2.785662] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.798851] usbcore: registered new interface driver usbhid
[ 2.798852] usbhid: USB HID core driver
[ 2.800963] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb2/2-1/2-1:1.0/0003:03F0:094A.0001/input/input9
[ 2.801032] hid-generic 0003:03F0:094A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:04:00.0-1/input0
[ 2.995544] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.997139] psmouse serio1: synaptics: queried max coordinates: x [..5398], y [..4728]
[ 3.018525] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.040513] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 3.052515] usb 3-1.5: new full-speed USB device number 3 using ehci-pci
[ 3.067153] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0x8a0400/0x0, board id: 0, fw id: 662324
[ 3.113499] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 3.150977] usb 1-1.4: New USB device found, idVendor=0408, idProduct=2fb1, bcdDevice= 9.01
[ 3.150982] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 3.150985] usb 1-1.4: Product: Laptop_Integrated_Webcam_2HDM
[ 3.150988] usb 1-1.4: Manufacturer: CN07CN2C786641CE0B2CA00
[ 3.169443] usb 3-1.5: New USB device found, idVendor=8086, idProduct=0189, bcdDevice=69.19
[ 3.169449] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.317695] ata2.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133
[ 3.317700] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 3.319549] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.319961] ata2.00: configured for UDMA/133
[ 3.320842] scsi 1:0:0:0: Direct-Access ATA ST9500423AS DEM1 PQ: 0 ANSI: 5
[ 3.443581] Console: switching to colour frame buffer device 200x56
[ 3.471278] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.636223] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.952239] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.955706] ata6.00: ATAPI: HL-DT-ST DVD+-RW GT50N, A101, max UDMA/133
[ 3.961264] ata6.00: configured for UDMA/133
[ 3.966663] scsi 5:0:0:0: CD-ROM HL-DT-ST DVD+-RW GT50N A101 PQ: 0 ANSI: 5
[ 4.005847] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 4.005850] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 4.005857] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 4.005858] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.005860] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.005860] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.005870] sd 0:0:0:0: [sda] Write Protect is off
[ 4.005872] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.005873] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.005887] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.037707] sdb: sdb1 sdb2
[ 4.038736] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.055053] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.055056] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.055364] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.097529] sda: sda1 sda2 < sda5 >
[ 4.097779] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.802702] PM: Image not found (code -22)
[ 5.009863] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.673537] random: crng init done
[ 7.420353] systemd[1]: Inserted module 'autofs4'
[ 7.731948] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 7.748800] systemd[1]: Detected architecture x86-64.
[ 7.769317] systemd[1]: Set hostname to <debian-sys>.
[ 10.476306] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 10.476606] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 10.476840] systemd[1]: Listening on Journal Socket (/dev/log).
[ 10.476986] systemd[1]: Listening on udev Kernel Socket.
[ 10.477221] systemd[1]: Listening on Journal Audit Socket.
[ 10.477254] systemd[1]: Reached target User and Group Name Lookups.
[ 10.501301] systemd[1]: Listening on Syslog Socket.
[ 10.636697] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 11.029706] systemd-journald[335]: Received request to flush runtime journal from PID 1
[ 11.414230] RPC: Registered named UNIX socket transport module.
[ 11.414232] RPC: Registered udp transport module.
[ 11.414232] RPC: Registered tcp transport module.
[ 11.414233] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.486385] lp: driver loaded but no devices found
[ 11.495727] ppdev: user-space parallel port driver
[ 11.700166] fuse init (API version 7.27)
[ 13.911942] audit: type=1400 audit(1592236928.436:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=376 comm="apparmor_parser"
[ 13.911953] audit: type=1400 audit(1592236928.436:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=376 comm="apparmor_parser"
[ 13.913396] audit: type=1400 audit(1592236928.440:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=381 comm="apparmor_parser"
[ 13.913400] audit: type=1400 audit(1592236928.440:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=381 comm="apparmor_parser"
[ 13.919562] audit: type=1400 audit(1592236928.444:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=379 comm="apparmor_parser"
[ 13.981320] audit: type=1400 audit(1592236928.508:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=383 comm="apparmor_parser"
[ 13.999788] audit: type=1400 audit(1592236928.524:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=377 comm="apparmor_parser"
[ 13.999798] audit: type=1400 audit(1592236928.524:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=377 comm="apparmor_parser"
[ 13.999804] audit: type=1400 audit(1592236928.524:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=377 comm="apparmor_parser"
[ 14.022427] audit: type=1400 audit(1592236928.548:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="firejail-default" pid=380 comm="apparmor_parser"
[ 14.873027] battery: ACPI: Battery Slot [BAT0] (battery absent)
[ 14.873034] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 14.877451] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 14.877452] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 14.877452] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 14.877453] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 14.942857] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.992549] ACPI: AC Adapter [ADP0] (on-line)
[ 15.057010] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11
[ 15.165458] iTCO_vendor_support: vendor-support=0
[ 15.221133] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 15.221278] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 15.221574] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.481340] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.481373] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 15.481399] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 15.604158] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 15.870399] Bluetooth: Core ver 2.22
[ 15.870416] NET: Registered protocol family 31
[ 15.870417] Bluetooth: HCI device and connection manager initialized
[ 15.870421] Bluetooth: HCI socket layer initialized
[ 15.870423] Bluetooth: L2CAP socket layer initialized
[ 15.870429] Bluetooth: SCO socket layer initialized
[ 16.043422] Intel(R) Wireless WiFi driver for Linux
[ 16.043423] Copyright(c) 2003- 2015 Intel Corporation
[ 16.043627] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 16.133255] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[ 16.133421] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 16.385334] usbcore: registered new interface driver btusb
[ 16.407955] Bluetooth: hci0: unexpected event for opcode 0x0000
[ 16.583442] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 16.600462] media: Linux media interface: v0.10
[ 16.620671] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 16.620674] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 16.620675] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 16.620678] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[ 16.733958] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 16.915159] videodev: Linux video capture interface: v2.00
[ 17.117136] snd_hda_codec_realtek hdaudioC0D0: ALC665: SKU not ready 0x598301f0
[ 17.117525] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC665: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
[ 17.117526] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.117527] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x1b/0x19/0x0/0x0/0x0)
[ 17.117528] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 17.117529] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 17.117529] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 17.117531] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
[ 17.117532] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 17.254886] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 17.255111] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 17.255152] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 17.255196] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 17.255236] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 17.416342] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2HDM (0408:2fb1)
[ 17.462818] uvcvideo: No streaming interface found for terminal 6.
[ 17.462832] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[ 17.462836] uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized!
[ 17.462840] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[ 17.462843] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[ 17.463040] input: Laptop_Integrated_Webcam_2HDM: as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input17