I have installed Debian 10 on a laptop and on a desktop. I am trying to use a Wantek USB headset (earphones + microphone). On both computers I observe the same bizarre failures:
- The earphones play the Skype ringtones, but no other sound from Skype or internet.
- The microphone passes the online microphone test https://www.onlinemictest.com/ , but not the Skype call test.
Checking parameters on Alsamixer, and installing firmware-linux-nonfree do not help. Both computers work well if I plug a non-USB headset with two coaxial connectors (one for microphone, one for earphones). The headset works well with Ubuntu 18.04 on another laptop.
Any ideas on explaining these symptoms, and curing the disease?
Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230
Bizarre failure of USB headset
- Head_on_a_Stick
- Posts: 14114
- Joined: 2014-06-01 17:46
- Location: London, England
- Has thanked: 81 times
- Been thanked: 133 times
Re: Bizarre failure of USB headset
Run this command in both distributions:
Then plug in the headset and compare & contrast the outputs in both to see what Ubuntu is doing differently.
Code: Select all
udevadm monitor
deadbang
Re: Bizarre failure of USB headset
Thank you for the suggestion. The main difference seems to be that Debian loads the two modules 'snd_seq_device' and 'snd_rawmidi', in addition to the two modules 'snd_usbmidi_lib' and 'snd_usb_audio' that Ubuntu also loads. See below for the raw outputs.
Debian 10 laptop W550SU1:
Ubuntu 18.04 laptop Acer Swift 3 :
Debian 10 laptop W550SU1:
Code: Select all
KERNEL[2233.243197] add /devices/pci0000:00/0000:00:14.0/usb2/2-6 (usb)
KERNEL[2233.249030] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0 (usb)
KERNEL[2233.249097] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.1 (usb)
KERNEL[2233.249141] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.2 (usb)
KERNEL[2233.249180] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3 (usb)
KERNEL[2233.249221] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3/0003:0D8C:0014.0002 (hid)
KERNEL[2233.249272] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3/0003:0D8C:0014.0002/input/input25 (input)
KERNEL[2233.305341] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3/0003:0D8C:0014.0002/input/input25/event18 (input)
KERNEL[2233.305588] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3/0003:0D8C:0014.0002/hidraw/hidraw1 (hidraw)
KERNEL[2233.305669] bind /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3/0003:0D8C:0014.0002 (hid)
KERNEL[2233.305742] bind /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3 (usb)
KERNEL[2233.305815] bind /devices/pci0000:00/0000:00:14.0/usb2/2-6 (usb)
UDEV [2233.327011] add /devices/pci0000:00/0000:00:14.0/usb2/2-6 (usb)
UDEV [2233.338867] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.1 (usb)
UDEV [2233.341096] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3 (usb)
UDEV [2233.344097] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3/0003:0D8C:0014.0002 (hid)
KERNEL[2233.344211] add /module/snd_seq_device (module)
KERNEL[2233.344300] add /bus/snd_seq (bus)
UDEV [2233.344869] add /module/snd_seq_device (module)
UDEV [2233.346780] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.2 (usb)
KERNEL[2233.350321] add /module/snd_rawmidi (module)
UDEV [2233.350827] add /module/snd_rawmidi (module)
UDEV [2233.351811] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3/0003:0D8C:0014.0002/input/input25 (input)
UDEV [2233.353491] add /bus/snd_seq (bus)
UDEV [2233.357704] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3/0003:0D8C:0014.0002/hidraw/hidraw1 (hidraw)
KERNEL[2233.358817] add /module/snd_usbmidi_lib (module)
UDEV [2233.359352] add /module/snd_usbmidi_lib (module)
KERNEL[2233.372741] add /module/snd_usb_audio (module)
UDEV [2233.373216] add /module/snd_usb_audio (module)
KERNEL[2233.376016] bind /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.1 (usb)
KERNEL[2233.376966] bind /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.2 (usb)
KERNEL[2233.381731] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2 (sound)
KERNEL[2233.382063] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2/pcmC2D0p (sound)
KERNEL[2233.382088] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2/pcmC2D0c (sound)
KERNEL[2233.382105] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2/controlC2 (sound)
KERNEL[2233.382130] bind /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0 (usb)
KERNEL[2233.384944] add /bus/usb/drivers/snd-usb-audio (drivers)
UDEV [2233.385850] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0 (usb)
UDEV [2233.385882] add /bus/usb/drivers/snd-usb-audio (drivers)
UDEV [2233.407559] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3/0003:0D8C:0014.0002/input/input25/event18 (input)
UDEV [2233.411017] bind /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3/0003:0D8C:0014.0002 (hid)
UDEV [2233.411062] bind /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.3 (usb)
UDEV [2233.418799] bind /devices/pci0000:00/0000:00:14.0/usb2/2-6 (usb)
UDEV [2233.421218] bind /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.2 (usb)
UDEV [2233.421261] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2 (sound)
KERNEL[2233.425988] change /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2 (sound)
UDEV [2233.427788] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2/pcmC2D0p (sound)
UDEV [2233.428292] bind /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.1 (usb)
UDEV [2233.434767] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2/pcmC2D0c (sound)
UDEV [2233.444774] add /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2/controlC2 (sound)
UDEV [2233.446492] bind /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0 (usb)
UDEV [2233.448717] change /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2 (sound)
Code: Select all
KERNEL[6153.898828] add /devices/pci0000:00/0000:00:14.0/usb1/1-1 (usb)
KERNEL[6153.899650] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0 (usb)
KERNEL[6153.899744] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1 (usb)
KERNEL[6153.899836] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2 (usb)
KERNEL[6153.899935] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3 (usb)
KERNEL[6153.900543] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:0D8C:0014.0003 (hid)
KERNEL[6153.900872] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:0D8C:0014.0003/input/input21 (input)
KERNEL[6153.957651] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:0D8C:0014.0003/input/input21/event17 (input)
KERNEL[6153.957817] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:0D8C:0014.0003/hidraw/hidraw2 (hidraw)
KERNEL[6153.957941] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:0D8C:0014.0003 (hid)
KERNEL[6153.958047] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3 (usb)
KERNEL[6153.958177] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1 (usb)
UDEV [6153.970884] add /devices/pci0000:00/0000:00:14.0/usb1/1-1 (usb)
UDEV [6153.974891] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2 (usb)
UDEV [6153.974942] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1 (usb)
KERNEL[6153.976919] add /module/snd_usbmidi_lib (module)
UDEV [6153.977257] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3 (usb)
UDEV [6153.977554] add /module/snd_usbmidi_lib (module)
UDEV [6153.978588] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:0D8C:0014.0003 (hid)
UDEV [6153.980081] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:0D8C:0014.0003/input/input21 (input)
UDEV [6153.980135] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:0D8C:0014.0003/hidraw/hidraw2 (hidraw)
KERNEL[6153.982468] add /module/snd_usb_audio (module)
UDEV [6153.983118] add /module/snd_usb_audio (module)
KERNEL[6153.983922] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1 (usb)
KERNEL[6153.984596] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2 (usb)
KERNEL[6153.989830] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card1 (sound)
KERNEL[6153.989890] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card1/pcmC1D0p (sound)
KERNEL[6153.989944] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card1/pcmC1D0c (sound)
KERNEL[6153.990004] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card1/controlC1 (sound)
KERNEL[6153.990082] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0 (usb)
KERNEL[6153.990104] add /bus/usb/drivers/snd-usb-audio (drivers)
UDEV [6153.990224] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0 (usb)
UDEV [6153.990874] add /bus/usb/drivers/snd-usb-audio (drivers)
UDEV [6154.031810] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:0D8C:0014.0003/input/input21/event17 (input)
UDEV [6154.035204] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:0D8C:0014.0003 (hid)
UDEV [6154.038236] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3 (usb)
UDEV [6154.042039] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1 (usb)
UDEV [6154.045931] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1 (usb)
UDEV [6154.046210] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2 (usb)
UDEV [6154.046392] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card1 (sound)
UDEV [6154.052746] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card1/pcmC1D0p (sound)
UDEV [6154.052923] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card1/pcmC1D0c (sound)
KERNEL[6154.053038] change /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card1 (sound)
UDEV [6154.070643] add /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card1/controlC1 (sound)
UDEV [6154.074236] bind /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0 (usb)
UDEV [6154.076430] change /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card1 (sound)
Last edited by ribault on 2020-10-23 17:53, edited 1 time in total.
- Head_on_a_Stick
- Posts: 14114
- Joined: 2014-06-01 17:46
- Location: London, England
- Has thanked: 81 times
- Been thanked: 133 times
Re: Bizarre failure of USB headset
Which desktop is this?
Can we also see the output of this command with the headset plugged in:
Can we also see the output of this command with the headset plugged in:
Code: Select all
pacmd list-sinks
deadbang
Re: Bizarre failure of USB headset
The data are not for the desktop (which I cannot access at the moment) but for two laptops. Here is now the output for the command 'pacmd list-sinks' that you suggest:
Debian 10 laptop W550SU1:
Ubuntu 18.04 laptop Acer Swift 3:
Debian 10 laptop W550SU1:
Code: Select all
2 sink(s) available.
index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 19661 / 30% / -31.37 dB, front-right: 19661 / 30% / -31.37 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC269VB Analog"
alsa.id = "ALC269VB Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7e10000 irq 31"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8c20"
device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC269VB"
alsa.components = "HDA:10ec0269,15585456,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-speaker>
* index: 1
name: <alsa_output.usb-C-Media_Electronics_Inc._USB_Audio_Device-00.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9049
volume: front-left: 33423 / 51% / -17.55 dB, front-right: 33423 / 51% / -17.55 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 2
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 2 <alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00>
module: 24
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "USB Audio Device"
alsa.long_card_name = "C-Media Electronics Inc. USB Audio Device at usb-0000:00:14.0-6, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/sound/card2"
udev.id = "usb-C-Media_Electronics_Inc._USB_Audio_Device-00"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0014"
device.product.name = "Audio Adapter (Unitek Y-247A)"
device.serial = "C-Media_Electronics_Inc._USB_Audio_Device"
device.string = "front:2"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Audio Adapter (Unitek Y-247A) Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB0d8c:0014"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
active port: <analog-output-speaker>
Code: Select all
2 sink(s) available.
index: 0
name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 34080 / 52% / -17,04 dB, front-right: 34080 / 52% / -17,04 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stéréo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
card: 0 <alsa_card.pci-0000_00_1f.3>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC256 Analog"
alsa.id = "ALC256 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xa121c000 irq 147"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9dc8"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Stéréo analogique"
device.description = "Audio interne Stéréo analogique"
alsa.mixer_name = "Realtek ALC256"
alsa.components = "HDA:10ec0256,10251300,00100002 HDA:8086280b,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-speaker: Haut-parleurs (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Casque audio (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-speaker>
* index: 1
name: <alsa_output.usb-C-Media_Electronics_Inc._USB_Audio_Device-00.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9049
volume: front-left: 46147 / 70% / -9,14 dB, front-right: 46147 / 70% / -9,14 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 2
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stéréo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
card: 1 <alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00>
module: 25
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "USB Audio Device"
alsa.long_card_name = "C-Media Electronics Inc. USB Audio Device at usb-0000:00:14.0-1, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/sound/card1"
udev.id = "usb-C-Media_Electronics_Inc._USB_Audio_Device-00"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0014"
device.product.name = "Audio Adapter (Unitek Y-247A)"
device.serial = "C-Media_Electronics_Inc._USB_Audio_Device"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Stéréo analogique"
device.description = "Audio Adapter (Unitek Y-247A) Stéréo analogique"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB0d8c:0014"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-output-speaker: Haut-parleurs (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
active port: <analog-output-speaker>
- Head_on_a_Stick
- Posts: 14114
- Joined: 2014-06-01 17:46
- Location: London, England
- Has thanked: 81 times
- Been thanked: 133 times
Re: Bizarre failure of USB headset
Sorry, I meant to ask which desktop environment is this? Is it GNOME?ribault wrote:The data are not for the desktop (which I cannot access at the moment) but for two laptops
Well they both look the same. I am perplexed.ribault wrote:Here is now the output for the command 'pacmd list-sinks' that you suggest
deadbang
Re: Bizarre failure of USB headset
The desktop environment for the Debian laptop is KDE.
Thank you for your help and for the useful commands.
Thank you for your help and for the useful commands.